add ota algorithm for device
1. effective "Differential Upgrade" patch algorithm with high compression rate 2. effective recovery algorithm support recovery firmware in blocks which has low memory consumption and wear-leveling strategies, especially suitable for embeded devices with low RAM. 3. add sample ota bootloader project, see: board\TencentOS_tiny_EVB_MX_Plus\KEIL\ota\ota_bootloader_recovery 4. add sample application project for download firmware through http, see: board\TencentOS_tiny_EVB_MX_Plus\KEIL\ota\ota_application_download_through_http 5. add sample application project for download firmware through qcloud explorer console, see: board\TencentOS_tiny_EVB_MX_Plus\KEIL\ota\ota_application_download_through_qcloud_iot_explorer 6. an OTA markdown document is pending
This commit is contained in:
daishengdong
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,922 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
|
||||
|
||||
<SchemaVersion>2.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>TencentOS_tiny</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32L431RCTx</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<PackID>Keil.STM32L4xx_DFP.2.0.0</PackID>
|
||||
<PackURL>http://www.keil.com/pack</PackURL>
|
||||
<Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x803FFFF) CLOCK(8000000) FPU2 CPUTYPE("Cortex-M4")</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile></StartupFile>
|
||||
<FlashDriverDll></FlashDriverDll>
|
||||
<DeviceId></DeviceId>
|
||||
<RegisterFile></RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc></SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>$$Device:STM32L431RCTx$CMSIS\SVD\STM32L4x1.svd</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath></RegisterFilePath>
|
||||
<DBRegisterFilePath></DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\obj\</OutputDirectory>
|
||||
<OutputName>TencentOS_tiny</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>1</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>0</BrowseInformation>
|
||||
<ListingPath>.\list\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopB1X>0</nStopB1X>
|
||||
<nStopB2X>0</nStopB2X>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin --output=@L.bin !L</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>0</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments>-REMAP -MPU</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments>-MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4107</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
|
||||
<Flash3></Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>2</RvdsVP>
|
||||
<RvdsMve>0</RvdsMve>
|
||||
<hadIRAM2>0</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>1</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>3</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>0</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x40000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8008000</StartAddress>
|
||||
<Size>0x40000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>2</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<uGnu>0</uGnu>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define>USE_HAL_DRIVER,STM32L431xx,</Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath>..\..\..\BSP\Inc;..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Inc;..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Legacy;..\..\..\..\..\platform\vendor_bsp\st\CMSIS\Device\ST\STM32L4xx\Include;..\..\..\..\..\platform\vendor_bsp\st\CMSIS\Include;..\..\..\..\..\kernel\core\include;..\..\..\TOS-CONFIG;..\..\..\..\..\platform\arch\arm\cortex-m4\keil;..\..\..\..\..\kernel\pm\include;..\..\..\..\..\osal\cmsis_os;..\..\..\..\..\arch\arm\arm-v7m\common\include;..\..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc;..\..\..\BSP\Hardware\DHT11;..\..\..\BSP\Hardware\OLED;..\..\..\BSP\Hardware\BH1750;..\..\..\..\..\devices\esp8266;..\..\..\..\..\net\at\include;..\..\..\..\..\kernel\hal\include;..\..\..\..\..\net\sal_module_wrapper;..\..\..\..\..\components\ota\download\include;..\..\..\..\..\components\ota\common\crc;..\..\..\..\..\components\ota\common\image;..\..\..\..\..\components\ota\common\flash;..\..\..\..\..\components\ota\common\partition;..\..\..\..\..\components\ota\common\env;..\..\..\..\..\components\fs\kv\include;..\..\..\..\..\components\ota\common\info</IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<uClangAs>0</uClangAs>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>1</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x08000000</TextAddressRange>
|
||||
<DataAddressRange>0x20000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile></ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings></DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
<Groups>
|
||||
<Group>
|
||||
<GroupName>Application/MDK-ARM</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>startup_stm32l431xx.s</FileName>
|
||||
<FileType>2</FileType>
|
||||
<FilePath>startup_stm32l431xx.s</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>Application/User</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>gpio.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\gpio.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>main.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\main.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>mcu_init.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\mcu_init.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_msp.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\stm32l4xx_hal_msp.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_it_module.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\stm32l4xx_it_module.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>usart.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\usart.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>adc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\adc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>dac.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\dac.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>i2c.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\i2c.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>spi.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\spi.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tim.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Src\tim.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>examples</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>ota_download_through_http_sample.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\examples\ota_download_through_http\ota_download_through_http_sample.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>Drivers/STM32L4xx_HAL_Driver</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_tim.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_tim_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_uart.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_uart_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_i2c.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_i2c_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_rcc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_rcc_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_flash.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_flash_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_flash_ramfunc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_gpio.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_dma.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_dma_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_pwr.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_pwr_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_cortex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_adc_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_adc.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_dac.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dac.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_dac_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dac_ex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_spi.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>stm32l4xx_hal_spi_ex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>Drivers/CMSIS</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>system_stm32l4xx.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>system_stm32l4xx.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>Hardware</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>DHT11_BUS.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Hardware\DHT11\DHT11_BUS.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>oled.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Hardware\OLED\oled.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>onchip_flash.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Hardware\ONCHIP_FLASH\onchip_flash.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>onchip_flash_ota.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\BSP\Hardware\ONCHIP_FLASH\onchip_flash_ota.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>kernel</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>tos_binary_heap.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_binary_heap.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_char_fifo.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_char_fifo.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_completion.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_completion.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_countdownlatch.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_countdownlatch.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_event.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_event.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_global.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_global.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_mail_queue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_mail_queue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_message_queue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_message_queue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_mmblk.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_mmblk.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_mmheap.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_mmheap.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_mutex.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_mutex.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_pend.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_pend.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_priority_mail_queue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_priority_mail_queue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_priority_message_queue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_priority_message_queue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_priority_queue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_priority_queue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_ring_queue.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_ring_queue.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_robin.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_robin.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_sched.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_sched.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_sem.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_sem.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_sys.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_sys.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_task.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_task.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_tick.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_tick.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_time.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_time.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_timer.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_timer.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_barrier.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_barrier.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_bitmap.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_bitmap.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_rwlock.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_rwlock.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_stopwatch.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\kernel\core\tos_stopwatch.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>cpu</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>port_s.S</FileName>
|
||||
<FileType>2</FileType>
|
||||
<FilePath>..\..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_s.S</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>tos_cpu.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>port_c.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_c.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>cmsis</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>cmsis_os.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\osal\cmsis_os\cmsis_os.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>config</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>tos_config.h</FileName>
|
||||
<FileType>5</FileType>
|
||||
<FilePath>..\..\TOS-CONFIG\tos_config.h</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>at</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>tos_at.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\net\at\src\tos_at.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>devices</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>esp8266.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\devices\esp8266\esp8266.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>sal_module_wrapper</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>sal_module_wrapper.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\net\sal_module_wrapper\sal_module_wrapper.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>hal</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>tos_hal_uart.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\platform\hal\st\stm32l4xx\src\tos_hal_uart.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>ota_download</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>ota_download_http.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\download\protocol\http\ota_download_http.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>hal_tcp_module.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\download\transport_layer\tcp\module\hal_tcp_module.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>ota_common</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>ota_flash.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\common\flash\ota_flash.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>crc8.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\common\crc\crc8.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>ota_image.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\common\image\ota_image.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>ota_partition.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\common\partition\ota_partition.c</FilePath>
|
||||
</File>
|
||||
<File>
|
||||
<FileName>ota_env.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\ota\common\env\ota_env.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>kv</GroupName>
|
||||
<Files>
|
||||
<File>
|
||||
<FileName>tos_kv.c</FileName>
|
||||
<FileType>1</FileType>
|
||||
<FilePath>..\..\..\..\..\components\fs\kv\tos_kv.c</FilePath>
|
||||
</File>
|
||||
</Files>
|
||||
</Group>
|
||||
<Group>
|
||||
<GroupName>::CMSIS</GroupName>
|
||||
</Group>
|
||||
</Groups>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
<RTE>
|
||||
<apis/>
|
||||
<components>
|
||||
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
|
||||
<package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
|
||||
<targetInfos>
|
||||
<targetInfo name="TencentOS_tiny"/>
|
||||
</targetInfos>
|
||||
</component>
|
||||
</components>
|
||||
<files/>
|
||||
</RTE>
|
||||
|
||||
</Project>
|
||||
@@ -0,0 +1,404 @@
|
||||
;********************** COPYRIGHT(c) 2017 STMicroelectronics ******************
|
||||
;* File Name : startup_stm32l431xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32L431xx Ultra Low Power devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;*
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x100
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x100
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SDMMC1_IRQHandler ; SDMMC1
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP_IRQHandler ; COMP Interrupt
|
||||
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
|
||||
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
|
||||
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
|
||||
DCD LPUART1_IRQHandler ; LP UART1 interrupt
|
||||
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
|
||||
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD RNG_IRQHandler ; RNG global interrupt
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
DCD CRS_IRQHandler ; CRS interrupt
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_PVM_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT SDMMC1_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT LPTIM1_IRQHandler [WEAK]
|
||||
EXPORT LPTIM2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel7_IRQHandler [WEAK]
|
||||
EXPORT LPUART1_IRQHandler [WEAK]
|
||||
EXPORT QUADSPI_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT SAI1_IRQHandler [WEAK]
|
||||
EXPORT SWPMI1_IRQHandler [WEAK]
|
||||
EXPORT TSC_IRQHandler [WEAK]
|
||||
EXPORT RNG_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
EXPORT CRS_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_PVM_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
SDMMC1_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
COMP_IRQHandler
|
||||
LPTIM1_IRQHandler
|
||||
LPTIM2_IRQHandler
|
||||
DMA2_Channel6_IRQHandler
|
||||
DMA2_Channel7_IRQHandler
|
||||
LPUART1_IRQHandler
|
||||
QUADSPI_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
SAI1_IRQHandler
|
||||
SWPMI1_IRQHandler
|
||||
TSC_IRQHandler
|
||||
RNG_IRQHandler
|
||||
FPU_IRQHandler
|
||||
CRS_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,337 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32l4xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32l4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* After each device reset the MSI (4 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* This file configures the system clock as follows:
|
||||
*=============================================================================
|
||||
*-----------------------------------------------------------------------------
|
||||
* System Clock source | MSI
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(Hz) | 4000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* HCLK(Hz) | 4000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHB Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1 Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2 Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_M | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_N | 8
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_P | 7
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_Q | 2
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_R | 2
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI1_P | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI1_Q | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI1_R | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI2_P | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI2_Q | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI2_R | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* Require 48MHz for USB OTG FS, | Disabled
|
||||
* SDIO and RNG clock |
|
||||
*-----------------------------------------------------------------------------
|
||||
*=============================================================================
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32l4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32l4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x8000 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* The SystemCoreClock variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 4000000U;
|
||||
|
||||
const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
|
||||
const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
|
||||
const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \
|
||||
4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set MSION bit */
|
||||
RCC->CR |= RCC_CR_MSION;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000U;
|
||||
|
||||
/* Reset HSEON, CSSON , HSION, and PLLON bits */
|
||||
RCC->CR &= 0xEAF6FFFFU;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x00001000U;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= 0xFFFBFFFFU;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIER = 0x00000000U;
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
|
||||
* or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
|
||||
* 4 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value
|
||||
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U;
|
||||
|
||||
/* Get MSI Range frequency--------------------------------------------------*/
|
||||
if((RCC->CR & RCC_CR_MSIRGSEL) == RESET)
|
||||
{ /* MSISRANGE from RCC_CSR applies */
|
||||
msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U;
|
||||
}
|
||||
else
|
||||
{ /* MSIRANGE from RCC_CR applies */
|
||||
msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U;
|
||||
}
|
||||
/*MSI frequency range in HZ*/
|
||||
msirange = MSIRangeTable[msirange];
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
switch (RCC->CFGR & RCC_CFGR_SWS)
|
||||
{
|
||||
case 0x00: /* MSI used as system clock source */
|
||||
SystemCoreClock = msirange;
|
||||
break;
|
||||
|
||||
case 0x04: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
|
||||
case 0x08: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
|
||||
case 0x0C: /* PLL used as system clock source */
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
|
||||
SYSCLK = PLL_VCO / PLLR
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
|
||||
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ;
|
||||
|
||||
switch (pllsource)
|
||||
{
|
||||
case 0x02: /* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm);
|
||||
break;
|
||||
|
||||
case 0x03: /* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm);
|
||||
break;
|
||||
|
||||
default: /* MSI used as PLL clock source */
|
||||
pllvco = (msirange / pllm);
|
||||
break;
|
||||
}
|
||||
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U);
|
||||
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U;
|
||||
SystemCoreClock = pllvco/pllr;
|
||||
break;
|
||||
|
||||
default:
|
||||
SystemCoreClock = msirange;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK clock frequency --------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,404 @@
|
||||
;********************** COPYRIGHT(c) 2017 STMicroelectronics ******************
|
||||
;* File Name : startup_stm32l431xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32L431xx Ultra Low Power devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;*
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x100
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x100
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SDMMC1_IRQHandler ; SDMMC1
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP_IRQHandler ; COMP Interrupt
|
||||
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
|
||||
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
|
||||
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
|
||||
DCD LPUART1_IRQHandler ; LP UART1 interrupt
|
||||
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
|
||||
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD RNG_IRQHandler ; RNG global interrupt
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
DCD CRS_IRQHandler ; CRS interrupt
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_PVM_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT SDMMC1_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT LPTIM1_IRQHandler [WEAK]
|
||||
EXPORT LPTIM2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel7_IRQHandler [WEAK]
|
||||
EXPORT LPUART1_IRQHandler [WEAK]
|
||||
EXPORT QUADSPI_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT SAI1_IRQHandler [WEAK]
|
||||
EXPORT SWPMI1_IRQHandler [WEAK]
|
||||
EXPORT TSC_IRQHandler [WEAK]
|
||||
EXPORT RNG_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
EXPORT CRS_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_PVM_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
SDMMC1_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
COMP_IRQHandler
|
||||
LPTIM1_IRQHandler
|
||||
LPTIM2_IRQHandler
|
||||
DMA2_Channel6_IRQHandler
|
||||
DMA2_Channel7_IRQHandler
|
||||
LPUART1_IRQHandler
|
||||
QUADSPI_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
SAI1_IRQHandler
|
||||
SWPMI1_IRQHandler
|
||||
TSC_IRQHandler
|
||||
RNG_IRQHandler
|
||||
FPU_IRQHandler
|
||||
CRS_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,450 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2020 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32L4xx_HAL_CONF_H
|
||||
#define __STM32L4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
/*#define HAL_ADC_MODULE_ENABLED */
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_CAN_MODULE_ENABLED */
|
||||
/*#define HAL_COMP_MODULE_ENABLED */
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||
/*#define HAL_DAC_MODULE_ENABLED */
|
||||
/*#define HAL_DCMI_MODULE_ENABLED */
|
||||
/*#define HAL_DMA2D_MODULE_ENABLED */
|
||||
/*#define HAL_DFSDM_MODULE_ENABLED */
|
||||
/*#define HAL_DSI_MODULE_ENABLED */
|
||||
/*#define HAL_FIREWALL_MODULE_ENABLED */
|
||||
/*#define HAL_GFXMMU_MODULE_ENABLED */
|
||||
/*#define HAL_HCD_MODULE_ENABLED */
|
||||
/*#define HAL_HASH_MODULE_ENABLED */
|
||||
/*#define HAL_I2S_MODULE_ENABLED */
|
||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||
/*#define HAL_LTDC_MODULE_ENABLED */
|
||||
/*#define HAL_LCD_MODULE_ENABLED */
|
||||
/*#define HAL_LPTIM_MODULE_ENABLED */
|
||||
/*#define HAL_MMC_MODULE_ENABLED */
|
||||
/*#define HAL_NAND_MODULE_ENABLED */
|
||||
/*#define HAL_NOR_MODULE_ENABLED */
|
||||
/*#define HAL_OPAMP_MODULE_ENABLED */
|
||||
/*#define HAL_OSPI_MODULE_ENABLED */
|
||||
/*#define HAL_OSPI_MODULE_ENABLED */
|
||||
/*#define HAL_PCD_MODULE_ENABLED */
|
||||
/*#define HAL_PKA_MODULE_ENABLED */
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
/*#define HAL_RNG_MODULE_ENABLED */
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SAI_MODULE_ENABLED */
|
||||
/*#define HAL_SD_MODULE_ENABLED */
|
||||
/*#define HAL_SMBUS_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
/*#define HAL_SRAM_MODULE_ENABLED */
|
||||
/*#define HAL_SWPMI_MODULE_ENABLED */
|
||||
/*#define HAL_TIM_MODULE_ENABLED */
|
||||
/*#define HAL_TSC_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
/*#define HAL_EXTI_MODULE_ENABLED */
|
||||
/*#define HAL_PSSI_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
||||
* This value is the default MSI range value after Reset.
|
||||
*/
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
|
||||
* This internal oscillator is mainly dedicated to provide a high precision clock to
|
||||
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
|
||||
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
|
||||
* which is subject to manufacturing process variations.
|
||||
*/
|
||||
#if !defined (HSI48_VALUE)
|
||||
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
||||
The real value my vary depending on manufacturing process variations.*/
|
||||
#endif /* HSI48_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI1 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI2 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 0U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rcc.h"
|
||||
#include "stm32l4xx_hal_rcc_ex.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dma.h"
|
||||
#include "stm32l4xx_hal_dma_ex.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FIREWALL_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_firewall.h"
|
||||
#endif /* HAL_FIREWALL_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lcd.h"
|
||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OPAMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_opamp.h"
|
||||
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_ospi.h"
|
||||
#endif /* HAL_OSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PKA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pka.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SWPMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_swpmi.h"
|
||||
#endif /* HAL_SWPMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TSC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tsc.h"
|
||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GFXMMU_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_gfxmmu.h"
|
||||
#endif /* HAL_GFXMMU_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PSSI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pssi.h"
|
||||
#endif /* HAL_PSSI_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(char *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32L4xx_HAL_CONF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,69 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32L4xx_IT_H
|
||||
#define __STM32L4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32L4xx_IT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,404 @@
|
||||
;********************** COPYRIGHT(c) 2017 STMicroelectronics ******************
|
||||
;* File Name : startup_stm32l431xx.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32L431xx Ultra Low Power devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;*
|
||||
;* Redistribution and use in source and binary forms, with or without modification,
|
||||
;* are permitted provided that the following conditions are met:
|
||||
;* 1. Redistributions of source code must retain the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer.
|
||||
;* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
;* this list of conditions and the following disclaimer in the documentation
|
||||
;* and/or other materials provided with the distribution.
|
||||
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
;* may be used to endorse or promote products derived from this software
|
||||
;* without specific prior written permission.
|
||||
;*
|
||||
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x200
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU (0x2a00 + 0x2a00)
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
|
||||
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SDMMC1_IRQHandler ; SDMMC1
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP_IRQHandler ; COMP Interrupt
|
||||
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
|
||||
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
|
||||
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
|
||||
DCD LPUART1_IRQHandler ; LP UART1 interrupt
|
||||
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 error
|
||||
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
|
||||
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD RNG_IRQHandler ; RNG global interrupt
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
DCD CRS_IRQHandler ; CRS interrupt
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_PVM_IRQHandler [WEAK]
|
||||
EXPORT TAMP_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT SDMMC1_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT COMP_IRQHandler [WEAK]
|
||||
EXPORT LPTIM1_IRQHandler [WEAK]
|
||||
EXPORT LPTIM2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel7_IRQHandler [WEAK]
|
||||
EXPORT LPUART1_IRQHandler [WEAK]
|
||||
EXPORT QUADSPI_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT SAI1_IRQHandler [WEAK]
|
||||
EXPORT SWPMI1_IRQHandler [WEAK]
|
||||
EXPORT TSC_IRQHandler [WEAK]
|
||||
EXPORT RNG_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
EXPORT CRS_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_PVM_IRQHandler
|
||||
TAMP_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
SDMMC1_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
COMP_IRQHandler
|
||||
LPTIM1_IRQHandler
|
||||
LPTIM2_IRQHandler
|
||||
DMA2_Channel6_IRQHandler
|
||||
DMA2_Channel7_IRQHandler
|
||||
LPUART1_IRQHandler
|
||||
QUADSPI_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
SAI1_IRQHandler
|
||||
SWPMI1_IRQHandler
|
||||
TSC_IRQHandler
|
||||
RNG_IRQHandler
|
||||
FPU_IRQHandler
|
||||
CRS_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,181 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
#include "stdio.h"
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
#include "ota_recovery.h"
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_USART2_UART_Init(void);
|
||||
|
||||
UART_HandleTypeDef huart2;
|
||||
|
||||
int fputc(int ch, FILE *f)
|
||||
{
|
||||
while ((USART2->ISR & 0X40) == 0);
|
||||
USART2->TDR = (uint8_t)ch;
|
||||
return ch;
|
||||
}
|
||||
|
||||
extern ota_flash_drv_t stm32l4_norflash_onchip_drv_ota;
|
||||
extern ota_flash_prop_t stm32l4_norflash_onchip_prop_ota;
|
||||
|
||||
int main(void)
|
||||
{
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
MX_USART2_UART_Init();
|
||||
|
||||
uint32_t partition_addr = 0x08024800;
|
||||
|
||||
if (ota_env_init(OTA_UPDATE_IN_POSITION, partition_addr, &stm32l4_norflash_onchip_drv_ota, &stm32l4_norflash_onchip_prop_ota) < 0) {
|
||||
printf("env init failed!\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
#if 1
|
||||
if (ota_recovery_xip() != 0) {
|
||||
printf("recovery failed!\n");
|
||||
} else {
|
||||
printf("recovery successfully!\n");
|
||||
}
|
||||
#else
|
||||
if (ota_recovery() != 0) {
|
||||
printf("recovery failed!\n");
|
||||
} else {
|
||||
printf("recovery successfully!\n");
|
||||
}
|
||||
#endif
|
||||
|
||||
uint32_t jmp_addr, app_addr = ota_partition_start(OTA_PARTITION_ACTIVE_APP);
|
||||
|
||||
/* test if user code is programmed starting from address app_addr */
|
||||
if (((*(uint32_t *)app_addr) & 0x2FFE0000) == 0x20000000) {
|
||||
/* Jump to user application */
|
||||
jmp_addr = *(uint32_t *)(app_addr + 4);
|
||||
|
||||
/* Initialize user application's Stack Pointer */
|
||||
__set_MSP(*(uint32_t *)app_addr);
|
||||
((void (*)(void))jmp_addr)();
|
||||
}
|
||||
}
|
||||
|
||||
void Error_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 20;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
|
||||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
|
||||
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART2 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART2_UART_Init(void)
|
||||
{
|
||||
huart2.Instance = USART2;
|
||||
huart2.Init.BaudRate = 115200;
|
||||
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart2.Init.StopBits = UART_STOPBITS_1;
|
||||
huart2.Init.Parity = UART_PARITY_NONE;
|
||||
huart2.Init.Mode = UART_MODE_TX_RX;
|
||||
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
#if 0
|
||||
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||
huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||
#else
|
||||
huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT;
|
||||
huart2.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
|
||||
#endif
|
||||
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(char *file, uint32_t line)
|
||||
{
|
||||
}
|
||||
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
@@ -0,0 +1,155 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : stm32l4xx_hal_msp.c
|
||||
* Description : This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#include "stm32l4xx_hal.h"
|
||||
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CRC MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hcrc: CRC handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_CRC_MspInit(CRC_HandleTypeDef* hcrc)
|
||||
{
|
||||
if(hcrc->Instance==CRC)
|
||||
{
|
||||
/* USER CODE BEGIN CRC_MspInit 0 */
|
||||
|
||||
/* USER CODE END CRC_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_CRC_CLK_ENABLE();
|
||||
/* USER CODE BEGIN CRC_MspInit 1 */
|
||||
|
||||
/* USER CODE END CRC_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CRC MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hcrc: CRC handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_CRC_MspDeInit(CRC_HandleTypeDef* hcrc)
|
||||
{
|
||||
if(hcrc->Instance==CRC)
|
||||
{
|
||||
/* USER CODE BEGIN CRC_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CRC_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_CRC_CLK_DISABLE();
|
||||
/* USER CODE BEGIN CRC_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CRC_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(huart->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART2_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**USART2 GPIO Configuration
|
||||
PA2 ------> USART2_TX
|
||||
PA3 ------> USART2_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN USART2_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
if(huart->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART2_CLK_DISABLE();
|
||||
|
||||
/**USART2 GPIO Configuration
|
||||
PA2 ------> USART2_TX
|
||||
PA3 ------> USART2_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
||||
|
||||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,202 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32l4xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Prefetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
__weak void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32L4xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32l4xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,337 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32l4xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32l4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* After each device reset the MSI (4 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* This file configures the system clock as follows:
|
||||
*=============================================================================
|
||||
*-----------------------------------------------------------------------------
|
||||
* System Clock source | MSI
|
||||
*-----------------------------------------------------------------------------
|
||||
* SYSCLK(Hz) | 4000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* HCLK(Hz) | 4000000
|
||||
*-----------------------------------------------------------------------------
|
||||
* AHB Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB1 Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* APB2 Prescaler | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_M | 1
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_N | 8
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_P | 7
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_Q | 2
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLL_R | 2
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI1_P | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI1_Q | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI1_R | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI2_P | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI2_Q | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* PLLSAI2_R | NA
|
||||
*-----------------------------------------------------------------------------
|
||||
* Require 48MHz for USB OTG FS, | Disabled
|
||||
* SDIO and RNG clock |
|
||||
*-----------------------------------------------------------------------------
|
||||
*=============================================================================
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32l4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32l4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* The SystemCoreClock variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 4000000U;
|
||||
|
||||
const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
|
||||
const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
|
||||
const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \
|
||||
4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32L4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set MSION bit */
|
||||
RCC->CR |= RCC_CR_MSION;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000U;
|
||||
|
||||
/* Reset HSEON, CSSON , HSION, and PLLON bits */
|
||||
RCC->CR &= 0xEAF6FFFFU;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x00001000U;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= 0xFFFBFFFFU;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIER = 0x00000000U;
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
|
||||
* or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
|
||||
* 4 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value
|
||||
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U;
|
||||
|
||||
/* Get MSI Range frequency--------------------------------------------------*/
|
||||
if((RCC->CR & RCC_CR_MSIRGSEL) == RESET)
|
||||
{ /* MSISRANGE from RCC_CSR applies */
|
||||
msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U;
|
||||
}
|
||||
else
|
||||
{ /* MSIRANGE from RCC_CR applies */
|
||||
msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U;
|
||||
}
|
||||
/*MSI frequency range in HZ*/
|
||||
msirange = MSIRangeTable[msirange];
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
switch (RCC->CFGR & RCC_CFGR_SWS)
|
||||
{
|
||||
case 0x00: /* MSI used as system clock source */
|
||||
SystemCoreClock = msirange;
|
||||
break;
|
||||
|
||||
case 0x04: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
|
||||
case 0x08: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
|
||||
case 0x0C: /* PLL used as system clock source */
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
|
||||
SYSCLK = PLL_VCO / PLLR
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
|
||||
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ;
|
||||
|
||||
switch (pllsource)
|
||||
{
|
||||
case 0x02: /* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm);
|
||||
break;
|
||||
|
||||
case 0x03: /* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm);
|
||||
break;
|
||||
|
||||
default: /* MSI used as PLL clock source */
|
||||
pllvco = (msirange / pllm);
|
||||
break;
|
||||
}
|
||||
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U);
|
||||
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U;
|
||||
SystemCoreClock = pllvco/pllr;
|
||||
break;
|
||||
|
||||
default:
|
||||
SystemCoreClock = msirange;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK clock frequency --------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,19 @@
|
||||
#ifndef _TOS_CONFIG_H_
|
||||
#define _TOS_CONFIG_H_
|
||||
|
||||
#include "stm32l4xx.h"
|
||||
|
||||
#define TOS_CFG_EVENT_DRIVEN_EN 1u
|
||||
|
||||
#define TOS_CFG_MMHEAP_EN 1u
|
||||
|
||||
#define TOS_CFG_MMHEAP_DEFAULT_POOL_SIZE 0x8000
|
||||
|
||||
#define TOS_CFG_PWR_MGR_EN 0u
|
||||
|
||||
#define TOS_CFG_CPU_TICK_PER_SECOND 1000u
|
||||
|
||||
#define TOS_CFG_CPU_CLOCK (SystemCoreClock)
|
||||
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,48 @@
|
||||
/*
|
||||
* @Author: jiejie
|
||||
* @Github: https://github.com/jiejieTop
|
||||
* @Date: 2019-12-15 00:42:16
|
||||
* @LastEditTime: 2020-02-25 09:25:35
|
||||
* @Description: the code belongs to jiejie, please keep the author information and source code according to the license.
|
||||
*/
|
||||
#ifndef _MQTT_CONFIG_H_
|
||||
#define _MQTT_CONFIG_H_
|
||||
|
||||
//#define LOG_IS_SALOF
|
||||
|
||||
#define LOG_LEVEL DEBUG_LEVEL //WARN_LEVEL DEBUG_LEVEL
|
||||
|
||||
#ifdef LOG_IS_SALOF
|
||||
#define USE_LOG (1U)
|
||||
#define USE_SALOF (1U)
|
||||
#define SALOF_OS USE_TENCENTOS
|
||||
#define USE_IDLE_HOOK (0U)
|
||||
#define LOG_COLOR (0U)
|
||||
#define LOG_TS (0U)
|
||||
#define LOG_TAR (0U)
|
||||
#define SALOF_BUFF_SIZE (512U)
|
||||
#define SALOF_FIFO_SIZE (1024U)
|
||||
#define SALOF_TASK_STACK_SIZE (1024U)
|
||||
#define SALOF_TASK_TICK (50U)
|
||||
#endif
|
||||
|
||||
|
||||
#define MQTT_MAX_PACKET_ID (0xFFFF - 1)
|
||||
#define MQTT_TOPIC_LEN_MAX 64
|
||||
#define MQTT_ACK_HANDLER_NUM_MAX 64
|
||||
#define MQTT_DEFAULT_BUF_SIZE 1024
|
||||
#define MQTT_DEFAULT_CMD_TIMEOUT 4000
|
||||
#define MQTT_MAX_CMD_TIMEOUT 20000
|
||||
#define MQTT_MIN_CMD_TIMEOUT 1000
|
||||
#define MQTT_KEEP_ALIVE_INTERVAL 100 // unit: second
|
||||
#define MQTT_VERSION 4 // 4 is mqtt 3.1.1
|
||||
#define MQTT_RECONNECT_DEFAULT_DURATION 1000
|
||||
#define MQTT_THREAD_STACK_SIZE 2048
|
||||
#define MQTT_THREAD_PRIO 5
|
||||
#define MQTT_THREAD_TICK 50
|
||||
|
||||
#define MQTT_NETSOCKET_USE_AT
|
||||
|
||||
//#define MQTT_NETWORK_TYPE_TLS
|
||||
|
||||
#endif /* _MQTT_CONFIG_H_ */
|
||||
@@ -0,0 +1,41 @@
|
||||
#ifndef _TOS_CONFIG_H_
|
||||
#define _TOS_CONFIG_H_
|
||||
|
||||
#include "stm32l4xx.h"
|
||||
|
||||
#define TOS_CFG_TASK_PRIO_MAX 10u
|
||||
|
||||
#define TOS_CFG_ROUND_ROBIN_EN 1u
|
||||
|
||||
#define TOS_CFG_OBJECT_VERIFY_EN 1u
|
||||
|
||||
#define TOS_CFG_TASK_DYNAMIC_CREATE_EN 0u
|
||||
|
||||
#define TOS_CFG_EVENT_EN 1u
|
||||
|
||||
#define TOS_CFG_MMBLK_EN 1u
|
||||
|
||||
#define TOS_CFG_MMHEAP_EN 1u
|
||||
|
||||
#define TOS_CFG_MMHEAP_DEFAULT_POOL_SIZE 0x6000
|
||||
|
||||
#define TOS_CFG_MUTEX_EN 1u
|
||||
|
||||
#define TOS_CFG_TIMER_EN 1u
|
||||
|
||||
#define TOS_CFG_PWR_MGR_EN 1u
|
||||
|
||||
#define TOS_CFG_TICKLESS_EN 1u
|
||||
|
||||
#define TOS_CFG_SEM_EN 1u
|
||||
|
||||
#define TOS_CFG_IDLE_TASK_STK_SIZE 512u
|
||||
|
||||
#define TOS_CFG_CPU_TICK_PER_SECOND 1000u
|
||||
|
||||
#define TOS_CFG_CPU_CLOCK (SystemCoreClock)
|
||||
|
||||
#define TOS_CFG_TIMER_AS_PROC 1u
|
||||
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,55 @@
|
||||
#ifndef _TOS_CONFIG_H_
|
||||
#define _TOS_CONFIG_H_
|
||||
|
||||
#include "stm32l4xx.h"
|
||||
|
||||
#define TOS_CFG_TASK_PRIO_MAX 10u
|
||||
|
||||
#define TOS_CFG_ROUND_ROBIN_EN 0u
|
||||
|
||||
#define TOS_CFG_OBJECT_VERIFY_EN 1u
|
||||
|
||||
#define TOS_CFG_TASK_DYNAMIC_CREATE_EN 0u
|
||||
|
||||
#define TOS_CFG_EVENT_EN 1u
|
||||
|
||||
#define TOS_CFG_MMBLK_EN 1u
|
||||
|
||||
#define TOS_CFG_MMHEAP_EN 0u
|
||||
|
||||
#define TOS_CFG_MMHEAP_DEFAULT_POOL_EN 1u
|
||||
|
||||
#define TOS_CFG_MMHEAP_DEFAULT_POOL_SIZE 0x8000
|
||||
|
||||
#define TOS_CFG_MUTEX_EN 1u
|
||||
|
||||
#define TOS_CFG_MESSAGE_QUEUE_EN 1u
|
||||
|
||||
#define TOS_CFG_MAIL_QUEUE_EN 1u
|
||||
|
||||
#define TOS_CFG_PRIORITY_MESSAGE_QUEUE_EN 0u
|
||||
|
||||
#define TOS_CFG_PRIORITY_MAIL_QUEUE_EN 0u
|
||||
|
||||
#define TOS_CFG_TIMER_EN 1u
|
||||
|
||||
#define TOS_CFG_PWR_MGR_EN 0u
|
||||
|
||||
#define TOS_CFG_TICKLESS_EN 0u
|
||||
|
||||
#define TOS_CFG_SEM_EN 1u
|
||||
|
||||
#define TOS_CFG_TASK_STACK_DRAUGHT_DEPTH_DETACT_EN 1u
|
||||
|
||||
#define TOS_CFG_FAULT_BACKTRACE_EN 0u
|
||||
|
||||
#define TOS_CFG_IDLE_TASK_STK_SIZE 128u
|
||||
|
||||
#define TOS_CFG_CPU_TICK_PER_SECOND 1000u
|
||||
|
||||
#define TOS_CFG_CPU_CLOCK (SystemCoreClock)
|
||||
|
||||
#define TOS_CFG_TIMER_AS_PROC 1u
|
||||
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user