diff --git a/board/NUCLEO_STM32L452RE/BSP/Inc/gpio.h b/board/NUCLEO_STM32L452RE/BSP/Inc/gpio.h
new file mode 100644
index 00000000..1e2e3a29
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Inc/gpio.h
@@ -0,0 +1,57 @@
+/**
+ ******************************************************************************
+ * File Name : gpio.h
+ * Description : This file contains all the functions prototypes for
+ * the gpio
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __gpio_H
+#define __gpio_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_GPIO_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ pinoutConfig_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Inc/main.h b/board/NUCLEO_STM32L452RE/BSP/Inc/main.h
new file mode 100644
index 00000000..251732f5
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Inc/main.h
@@ -0,0 +1,85 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.h
+ * @brief : Header for main.c file.
+ * This file contains the common defines of the application.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define B1_Pin GPIO_PIN_13
+#define B1_GPIO_Port GPIOC
+#define USART_TX_Pin GPIO_PIN_2
+#define USART_TX_GPIO_Port GPIOA
+#define USART_RX_Pin GPIO_PIN_3
+#define USART_RX_GPIO_Port GPIOA
+#define LD4_Pin GPIO_PIN_5
+#define LD4_GPIO_Port GPIOA
+#define TMS_Pin GPIO_PIN_13
+#define TMS_GPIO_Port GPIOA
+#define TCK_Pin GPIO_PIN_14
+#define TCK_GPIO_Port GPIOA
+#define SWO_Pin GPIO_PIN_3
+#define SWO_GPIO_Port GPIOB
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Inc/stm32l4xx_hal_conf.h b/board/NUCLEO_STM32L452RE/BSP/Inc/stm32l4xx_hal_conf.h
new file mode 100644
index 00000000..055f80fe
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Inc/stm32l4xx_hal_conf.h
@@ -0,0 +1,440 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2019 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_CONF_H
+#define __STM32L4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+
+#define HAL_MODULE_ENABLED
+/*#define HAL_ADC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_CAN_MODULE_ENABLED */
+/*#define HAL_COMP_MODULE_ENABLED */
+/*#define HAL_CRC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_DAC_MODULE_ENABLED */
+/*#define HAL_DCMI_MODULE_ENABLED */
+/*#define HAL_DMA2D_MODULE_ENABLED */
+/*#define HAL_DFSDM_MODULE_ENABLED */
+/*#define HAL_DSI_MODULE_ENABLED */
+/*#define HAL_FIREWALL_MODULE_ENABLED */
+/*#define HAL_GFXMMU_MODULE_ENABLED */
+/*#define HAL_HCD_MODULE_ENABLED */
+/*#define HAL_HASH_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+/*#define HAL_LTDC_MODULE_ENABLED */
+/*#define HAL_LCD_MODULE_ENABLED */
+/*#define HAL_LPTIM_MODULE_ENABLED */
+/*#define HAL_MMC_MODULE_ENABLED */
+/*#define HAL_NAND_MODULE_ENABLED */
+/*#define HAL_NOR_MODULE_ENABLED */
+/*#define HAL_OPAMP_MODULE_ENABLED */
+/*#define HAL_OSPI_MODULE_ENABLED */
+/*#define HAL_OSPI_MODULE_ENABLED */
+/*#define HAL_PCD_MODULE_ENABLED */
+/*#define HAL_QSPI_MODULE_ENABLED */
+/*#define HAL_QSPI_MODULE_ENABLED */
+/*#define HAL_RNG_MODULE_ENABLED */
+/*#define HAL_RTC_MODULE_ENABLED */
+/*#define HAL_SAI_MODULE_ENABLED */
+/*#define HAL_SD_MODULE_ENABLED */
+/*#define HAL_SMBUS_MODULE_ENABLED */
+/*#define HAL_SMARTCARD_MODULE_ENABLED */
+/*#define HAL_SPI_MODULE_ENABLED */
+/*#define HAL_SRAM_MODULE_ENABLED */
+/*#define HAL_SWPMI_MODULE_ENABLED */
+/*#define HAL_TIM_MODULE_ENABLED */
+/*#define HAL_TSC_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED */
+/*#define HAL_WWDG_MODULE_ENABLED */
+/*#define HAL_EXTI_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ * This value is the default MSI range value after Reset.
+ */
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+ * This internal oscillator is mainly dedicated to provide a high precision clock to
+ * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+ * which is subject to manufacturing process variations.
+ */
+#if !defined (HSI48_VALUE)
+ #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+ The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for SAI1 peripheral
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+ * frequency.
+ */
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
+ #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/**
+ * @brief External clock source for SAI2 peripheral
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+ * frequency.
+ */
+#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
+ #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/
+#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+
+#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 1U
+#define DATA_CACHE_ENABLE 1U
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32l4xx_hal_rcc.h"
+ #include "stm32l4xx_hal_rcc_ex.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32l4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32l4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32l4xx_hal_dma.h"
+ #include "stm32l4xx_hal_dma_ex.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32l4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32l4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32l4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32l4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32l4xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32l4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32l4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32l4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32l4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32l4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32l4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_FIREWALL_MODULE_ENABLED
+ #include "stm32l4xx_hal_firewall.h"
+#endif /* HAL_FIREWALL_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32l4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32l4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32l4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32l4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32l4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32l4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32l4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32l4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32l4xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32l4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32l4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32l4xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+ #include "stm32l4xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32l4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32l4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32l4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32l4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32l4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32l4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32l4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32l4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32l4xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32l4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32l4xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32l4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32l4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32l4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32l4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32l4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32l4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32l4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_GFXMMU_MODULE_ENABLED
+ #include "stm32l4xx_hal_gfxmmu.h"
+#endif /* HAL_GFXMMU_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(char *file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Inc/stm32l4xx_it.h b/board/NUCLEO_STM32L452RE/BSP/Inc/stm32l4xx_it.h
new file mode 100644
index 00000000..087df1aa
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Inc/stm32l4xx_it.h
@@ -0,0 +1,69 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32l4xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_IT_H
+#define __STM32L4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+__weak void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Inc/sys.h b/board/NUCLEO_STM32L452RE/BSP/Inc/sys.h
new file mode 100644
index 00000000..df89e8cd
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Inc/sys.h
@@ -0,0 +1,56 @@
+/**
+ ******************************************************************************
+ * File Name : SYS.h
+ * Description : This file provides code for the configuration
+ * of the SYS instances.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __sys_H
+#define __sys_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_SYS_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ sys_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Inc/usart.h b/board/NUCLEO_STM32L452RE/BSP/Inc/usart.h
new file mode 100644
index 00000000..71051ca6
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Inc/usart.h
@@ -0,0 +1,58 @@
+/**
+ ******************************************************************************
+ * File Name : USART.h
+ * Description : This file provides code for the configuration
+ * of the USART instances.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __usart_H
+#define __usart_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern UART_HandleTypeDef huart2;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_USART2_UART_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ usart_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/gpio.c b/board/NUCLEO_STM32L452RE/BSP/Src/gpio.c
new file mode 100644
index 00000000..8ba752b0
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/gpio.c
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * File Name : gpio.c
+ * Description : This file provides code for the configuration
+ * of all used GPIO pins.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as
+ * Analog
+ * Input
+ * Output
+ * EVENT_OUT
+ * EXTI
+ * Free pins are configured automatically as Analog (this feature is enabled through
+ * the Code Generation settings)
+*/
+void MX_GPIO_Init(void)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+ /* GPIO Ports Clock Enable */
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET);
+
+ /*Configure GPIO pin : PtPin */
+ GPIO_InitStruct.Pin = B1_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : PC0 PC1 PC2 PC3
+ PC4 PC5 PC6 PC7
+ PC8 PC9 PC10 PC11
+ PC12 */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+ |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7
+ |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+ |GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : PA0 PA1 PA4 PA6
+ PA7 PA8 PA9 PA10
+ PA11 PA12 PA15 */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_6
+ |GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+ |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_15;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : PtPin */
+ GPIO_InitStruct.Pin = LD4_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(LD4_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : PB0 PB1 PB2 PB10
+ PB11 PB12 PB13 PB14
+ PB15 PB4 PB5 PB6
+ PB7 PB8 PB9 */
+ GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_10
+ |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
+ |GPIO_PIN_15|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
+ |GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : PD2 */
+ GPIO_InitStruct.Pin = GPIO_PIN_2;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : PH3 */
+ GPIO_InitStruct.Pin = GPIO_PIN_3;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/main.c b/board/NUCLEO_STM32L452RE/BSP/Src/main.c
new file mode 100644
index 00000000..f6175722
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/main.c
@@ -0,0 +1,246 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.c
+ * @brief : Main program body
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "usart.h"
+#include "gpio.h"
+
+#include "cmsis_os.h"
+
+
+//task1
+#define TASK1_STK_SIZE 512
+void task1(void *pdata);
+osThreadDef(task1, osPriorityNormal, 1, TASK1_STK_SIZE);
+
+//task2
+#define TASK2_STK_SIZE 512
+void task2(void *pdata);
+osThreadDef(task2, osPriorityNormal, 1, TASK2_STK_SIZE);
+
+void task1(void *pdata)
+{
+ int count = 1;
+ while(1)
+ {
+ printf("\r\nHello world!\r\n###This is task1 ,count is %d \r\n", count++);
+ HAL_GPIO_TogglePin(LD4_GPIO_Port,LD4_Pin);
+ osDelay(2000);
+ }
+}
+
+void task2(void *pdata)
+{
+ int count = 1;
+ while(1)
+ {
+ printf("\r\nHello TencentOS !\r\n***This is task2 ,count is %d \r\n", count++);
+ osDelay(1000);
+ }
+}
+
+int fputc(int ch,FILE *f)
+{
+ if(ch == '\n')
+ {
+ HAL_UART_Transmit(&huart2,(void*)"\r",1,30000);
+ }
+ HAL_UART_Transmit(&huart2,(uint8_t *)&ch,1,0xFFFF);
+ return ch;
+}
+
+int _write(int fd, char *ptr, int len)
+{
+ (void)HAL_UART_Transmit(&huart2, (uint8_t *)ptr, len, 0xFFFF);
+ return len;
+}
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+ * @brief The application entry point.
+ * @retval int
+ */
+int main(void)
+{
+ /* USER CODE BEGIN 1 */
+
+ /* USER CODE END 1 */
+
+
+ /* MCU Configuration--------------------------------------------------------*/
+
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+
+ /* USER CODE BEGIN Init */
+
+ /* USER CODE END Init */
+
+ /* Configure the system clock */
+ SystemClock_Config();
+
+ /* USER CODE BEGIN SysInit */
+
+ /* USER CODE END SysInit */
+
+ /* Initialize all configured peripherals */
+ MX_GPIO_Init();
+ MX_USART2_UART_Init();
+ /* USER CODE BEGIN 2 */
+ osKernelInitialize(); //TOS Tiny kernel initialize
+ osThreadCreate(osThread(task1), NULL);// Create task1
+ osThreadCreate(osThread(task2), NULL);// Create task2
+ osKernelStart();//Start TOS Tiny
+ /* USER CODE END 2 */
+
+ /* Infinite loop */
+ /* USER CODE BEGIN WHILE */
+ while (1)
+ {
+ /* USER CODE END WHILE */
+
+ /* USER CODE BEGIN 3 */
+ }
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ */
+void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+ /** Initializes the CPU, AHB and APB busses clocks
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = 1;
+ RCC_OscInitStruct.PLL.PLLN = 10;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
+ RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /** Initializes the CPU, AHB and APB busses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
+ PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /** Configure the main internal regulator output voltage
+ */
+ if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+ * @brief This function is executed in case of error occurrence.
+ * @retval None
+ */
+void Error_Handler(void)
+{
+ /* USER CODE BEGIN Error_Handler_Debug */
+ /* User can add his own implementation to report the HAL error return state */
+
+ /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief Reports the name of the source file and the source line number
+ * where the assert_param error has occurred.
+ * @param file: pointer to the source file name
+ * @param line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(char *file, uint32_t line)
+{
+ /* USER CODE BEGIN 6 */
+ /* User can add his own implementation to report the file name and line number,
+ tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+ /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_hal_msp.c b/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_hal_msp.c
new file mode 100644
index 00000000..0d622e14
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_hal_msp.c
@@ -0,0 +1,84 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * File Name : stm32l4xx_hal_msp.c
+ * Description : This file provides code for the MSP Initialization
+ * and de-Initialization codes.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+ * Initializes the Global MSP.
+ */
+void HAL_MspInit(void)
+{
+ /* USER CODE BEGIN MspInit 0 */
+
+ /* USER CODE END MspInit 0 */
+
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* System interrupt init*/
+
+ /* USER CODE BEGIN MspInit 1 */
+
+ /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_it.c b/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_it.c
new file mode 100644
index 00000000..5da01692
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_it.c
@@ -0,0 +1,210 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32l4xx_it.c
+ * @brief Interrupt Service Routines.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32l4xx_it.h"
+#include "tos.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/* Cortex-M4 Processor Interruption and Exception Handlers */
+/******************************************************************************/
+/**
+ * @brief This function handles Non maskable interrupt.
+ */
+void NMI_Handler(void)
+{
+ /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+ /* USER CODE END NonMaskableInt_IRQn 0 */
+ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+ /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Hard fault interrupt.
+ */
+void HardFault_Handler(void)
+{
+ /* USER CODE BEGIN HardFault_IRQn 0 */
+
+ /* USER CODE END HardFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+ /* USER CODE END W1_HardFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles Memory management fault.
+ */
+void MemManage_Handler(void)
+{
+ /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+ /* USER CODE END MemoryManagement_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+ /* USER CODE END W1_MemoryManagement_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles Prefetch fault, memory access fault.
+ */
+void BusFault_Handler(void)
+{
+ /* USER CODE BEGIN BusFault_IRQn 0 */
+
+ /* USER CODE END BusFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+ /* USER CODE END W1_BusFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles Undefined instruction or illegal state.
+ */
+void UsageFault_Handler(void)
+{
+ /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+ /* USER CODE END UsageFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+ /* USER CODE END W1_UsageFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles System service call via SWI instruction.
+ */
+void SVC_Handler(void)
+{
+ /* USER CODE BEGIN SVCall_IRQn 0 */
+
+ /* USER CODE END SVCall_IRQn 0 */
+ /* USER CODE BEGIN SVCall_IRQn 1 */
+
+ /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Debug monitor.
+ */
+void DebugMon_Handler(void)
+{
+ /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+ /* USER CODE END DebugMonitor_IRQn 0 */
+ /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+ /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Pendable request for system service.
+ */
+__weak void PendSV_Handler(void)
+{
+ /* USER CODE BEGIN PendSV_IRQn 0 */
+
+ /* USER CODE END PendSV_IRQn 0 */
+ /* USER CODE BEGIN PendSV_IRQn 1 */
+
+ /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+ * @brief This function handles System tick timer.
+ */
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ if(tos_knl_is_running())
+ {
+ tos_knl_irq_enter();
+ tos_tick_handler();
+ tos_knl_irq_leave();
+ }
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32L4xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32l4xx.s). */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/sys.c b/board/NUCLEO_STM32L452RE/BSP/Src/sys.c
new file mode 100644
index 00000000..3bfe02eb
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/sys.c
@@ -0,0 +1,37 @@
+/**
+ ******************************************************************************
+ * File Name : SYS.c
+ * Description : This file provides code for the configuration
+ * of the SYS instances.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "sys.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* SYS init function */
+void MX_SYS_Init(void)
+{
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/system_stm32l4xx.c b/board/NUCLEO_STM32L452RE/BSP/Src/system_stm32l4xx.c
new file mode 100644
index 00000000..1db59ec9
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/system_stm32l4xx.c
@@ -0,0 +1,337 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l4xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32l4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * After each device reset the MSI (4 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * This file configures the system clock as follows:
+ *=============================================================================
+ *-----------------------------------------------------------------------------
+ * System Clock source | MSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 4000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 4000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB2 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * PLL_M | 1
+ *-----------------------------------------------------------------------------
+ * PLL_N | 8
+ *-----------------------------------------------------------------------------
+ * PLL_P | 7
+ *-----------------------------------------------------------------------------
+ * PLL_Q | 2
+ *-----------------------------------------------------------------------------
+ * PLL_R | 2
+ *-----------------------------------------------------------------------------
+ * PLLSAI1_P | NA
+ *-----------------------------------------------------------------------------
+ * PLLSAI1_Q | NA
+ *-----------------------------------------------------------------------------
+ * PLLSAI1_R | NA
+ *-----------------------------------------------------------------------------
+ * PLLSAI2_P | NA
+ *-----------------------------------------------------------------------------
+ * PLLSAI2_Q | NA
+ *-----------------------------------------------------------------------------
+ * PLLSAI2_R | NA
+ *-----------------------------------------------------------------------------
+ * Require 48MHz for USB OTG FS, | Disabled
+ * SDIO and RNG clock |
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32l4xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Variables
+ * @{
+ */
+ /* The SystemCoreClock variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 4000000U;
+
+ const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
+ const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
+ const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \
+ 4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U};
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set MSION bit */
+ RCC->CR |= RCC_CR_MSION;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000U;
+
+ /* Reset HSEON, CSSON , HSION, and PLLON bits */
+ RCC->CR &= 0xEAF6FFFFU;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x00001000U;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= 0xFFFBFFFFU;
+
+ /* Disable all interrupts */
+ RCC->CIER = 0x00000000U;
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
+ * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
+ * 4 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U;
+
+ /* Get MSI Range frequency--------------------------------------------------*/
+ if((RCC->CR & RCC_CR_MSIRGSEL) == RESET)
+ { /* MSISRANGE from RCC_CSR applies */
+ msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U;
+ }
+ else
+ { /* MSIRANGE from RCC_CR applies */
+ msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U;
+ }
+ /*MSI frequency range in HZ*/
+ msirange = MSIRangeTable[msirange];
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case 0x00: /* MSI used as system clock source */
+ SystemCoreClock = msirange;
+ break;
+
+ case 0x04: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+
+ case 0x08: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+
+ case 0x0C: /* PLL used as system clock source */
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ;
+
+ switch (pllsource)
+ {
+ case 0x02: /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm);
+ break;
+
+ case 0x03: /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm);
+ break;
+
+ default: /* MSI used as PLL clock source */
+ pllvco = (msirange / pllm);
+ break;
+ }
+ pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U);
+ pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U;
+ SystemCoreClock = pllvco/pllr;
+ break;
+
+ default:
+ SystemCoreClock = msirange;
+ break;
+ }
+ /* Compute HCLK clock frequency --------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/Src/usart.c b/board/NUCLEO_STM32L452RE/BSP/Src/usart.c
new file mode 100644
index 00000000..c19a5fdb
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/Src/usart.c
@@ -0,0 +1,108 @@
+/**
+ ******************************************************************************
+ * File Name : USART.c
+ * Description : This file provides code for the configuration
+ * of the USART instances.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef huart2;
+
+/* USART2 init function */
+
+void MX_USART2_UART_Init(void)
+{
+
+ huart2.Instance = USART2;
+ huart2.Init.BaudRate = 115200;
+ huart2.Init.WordLength = UART_WORDLENGTH_8B;
+ huart2.Init.StopBits = UART_STOPBITS_1;
+ huart2.Init.Parity = UART_PARITY_NONE;
+ huart2.Init.Mode = UART_MODE_TX_RX;
+ huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+ huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ if (HAL_UART_Init(&huart2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(uartHandle->Instance==USART2)
+ {
+ /* USER CODE BEGIN USART2_MspInit 0 */
+
+ /* USER CODE END USART2_MspInit 0 */
+ /* USART2 clock enable */
+ __HAL_RCC_USART2_CLK_ENABLE();
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ /**USART2 GPIO Configuration
+ PA2 ------> USART2_TX
+ PA3 ------> USART2_RX
+ */
+ GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN USART2_MspInit 1 */
+
+ /* USER CODE END USART2_MspInit 1 */
+ }
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
+{
+
+ if(uartHandle->Instance==USART2)
+ {
+ /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+ /* USER CODE END USART2_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USART2_CLK_DISABLE();
+
+ /**USART2 GPIO Configuration
+ PA2 ------> USART2_TX
+ PA3 ------> USART2_RX
+ */
+ HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
+
+ /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+ /* USER CODE END USART2_MspDeInit 1 */
+ }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/BSP/TencentOS_tiny.ioc b/board/NUCLEO_STM32L452RE/BSP/TencentOS_tiny.ioc
new file mode 100644
index 00000000..aa5343c9
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/BSP/TencentOS_tiny.ioc
@@ -0,0 +1,189 @@
+#MicroXplorer Configuration settings - do not modify
+File.Version=6
+KeepUserPlacement=false
+Mcu.Family=STM32L4
+Mcu.IP0=NVIC
+Mcu.IP1=RCC
+Mcu.IP2=SYS
+Mcu.IP3=USART2
+Mcu.IPNb=4
+Mcu.Name=STM32L452R(C-E)Tx
+Mcu.Package=LQFP64
+Mcu.Pin0=PC13
+Mcu.Pin1=PC14-OSC32_IN (PC14)
+Mcu.Pin10=PB3 (JTDO/TRACESWO)
+Mcu.Pin11=VP_SYS_VS_Systick
+Mcu.Pin2=PC15-OSC32_OUT (PC15)
+Mcu.Pin3=PH0-OSC_IN (PH0)
+Mcu.Pin4=PH1-OSC_OUT (PH1)
+Mcu.Pin5=PA2
+Mcu.Pin6=PA3
+Mcu.Pin7=PA5
+Mcu.Pin8=PA13 (JTMS/SWDIO)
+Mcu.Pin9=PA14 (JTCK/SWCLK)
+Mcu.PinsNb=12
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32L452RETx
+MxCube.Version=5.4.0
+MxDb.Version=DB.5.0.40
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+PA13\ (JTMS/SWDIO).GPIOParameters=GPIO_Label
+PA13\ (JTMS/SWDIO).GPIO_Label=TMS
+PA13\ (JTMS/SWDIO).Locked=true
+PA13\ (JTMS/SWDIO).Mode=Serial_Wire
+PA13\ (JTMS/SWDIO).Signal=SYS_JTMS-SWDIO
+PA14\ (JTCK/SWCLK).GPIOParameters=GPIO_Label
+PA14\ (JTCK/SWCLK).GPIO_Label=TCK
+PA14\ (JTCK/SWCLK).Locked=true
+PA14\ (JTCK/SWCLK).Mode=Serial_Wire
+PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PA2.GPIO_Label=USART_TX
+PA2.GPIO_Mode=GPIO_MODE_AF_PP
+PA2.GPIO_PuPd=GPIO_NOPULL
+PA2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
+PA2.Locked=true
+PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
+PA3.GPIO_Label=USART_RX
+PA3.GPIO_Mode=GPIO_MODE_AF_PP
+PA3.GPIO_PuPd=GPIO_NOPULL
+PA3.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
+PA3.Locked=true
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
+PA5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultOutputPP
+PA5.GPIO_Label=LD4 [green Led]
+PA5.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP
+PA5.GPIO_PuPd=GPIO_NOPULL
+PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA5.Locked=true
+PA5.Signal=GPIO_Output
+PB3\ (JTDO/TRACESWO).GPIOParameters=GPIO_Label
+PB3\ (JTDO/TRACESWO).GPIO_Label=SWO
+PB3\ (JTDO/TRACESWO).Locked=true
+PB3\ (JTDO/TRACESWO).Signal=SYS_JTDO-SWO
+PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PC13.GPIO_Label=B1 [Blue PushButton]
+PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
+PC13.GPIO_PuPd=GPIO_NOPULL
+PC13.Locked=true
+PC13.Signal=GPXTI13
+PC14-OSC32_IN\ (PC14).Locked=true
+PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
+PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
+PC15-OSC32_OUT\ (PC15).Locked=true
+PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
+PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
+PCC.Checker=true
+PCC.Line=STM32L4x2
+PCC.MCU=STM32L452R(C-E)Tx
+PCC.PartNumber=STM32L452RETx
+PCC.Seq0=0
+PCC.Series=STM32L4
+PCC.Temperature=25
+PCC.Vdd=3.0
+PH0-OSC_IN\ (PH0).Locked=true
+PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
+PH1-OSC_OUT\ (PH1).Locked=true
+PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=true
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32L452RETx
+ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.14.0
+ProjectManager.FreePins=true
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=basictest-gcc.ioc
+ProjectManager.ProjectName=basictest-gcc
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=Makefile
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true
+RCC.ADCFreq_Value=64000000
+RCC.AHBFreq_Value=80000000
+RCC.APB1Freq_Value=80000000
+RCC.APB1TimFreq_Value=80000000
+RCC.APB2Freq_Value=80000000
+RCC.APB2TimFreq_Value=80000000
+RCC.CortexFreq_Value=80000000
+RCC.DFSDMFreq_Value=80000000
+RCC.FCLKCortexFreq_Value=80000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=80000000
+RCC.HSE_VALUE=8000000
+RCC.HSI48_VALUE=48000000
+RCC.HSI_VALUE=16000000
+RCC.I2C1Freq_Value=80000000
+RCC.I2C2Freq_Value=80000000
+RCC.I2C3Freq_Value=80000000
+RCC.I2C4Freq_Value=80000000
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
+RCC.LPTIM1Freq_Value=80000000
+RCC.LPTIM2Freq_Value=80000000
+RCC.LPUART1Freq_Value=80000000
+RCC.LSCOPinFreq_Value=32000
+RCC.LSI_VALUE=32000
+RCC.MCO1PinFreq_Value=80000000
+RCC.MSI_VALUE=4000000
+RCC.PLLN=10
+RCC.PLLPoutputFreq_Value=22857142.85714286
+RCC.PLLQoutputFreq_Value=80000000
+RCC.PLLRCLKFreq_Value=80000000
+RCC.PLLSAI1PoutputFreq_Value=18285714.285714287
+RCC.PLLSAI1QoutputFreq_Value=64000000
+RCC.PLLSAI1RoutputFreq_Value=64000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI
+RCC.PREFETCH_ENABLE=1
+RCC.PWRFreq_Value=80000000
+RCC.RNGFreq_Value=64000000
+RCC.SAI1Freq_Value=18285714.285714287
+RCC.SDMMCFreq_Value=64000000
+RCC.SWPMI1Freq_Value=80000000
+RCC.SYSCLKFreq_VALUE=80000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.UART4Freq_Value=80000000
+RCC.UART5Freq_Value=80000000
+RCC.USART1Freq_Value=80000000
+RCC.USART2Freq_Value=80000000
+RCC.USART3Freq_Value=80000000
+RCC.USBFreq_Value=64000000
+RCC.VCOInputFreq_Value=16000000
+RCC.VCOOutputFreq_Value=160000000
+RCC.VCOSAI1OutputFreq_Value=128000000
+RCC.VCOSAI2OutputFreq_Value=128000000
+SH.GPXTI13.0=GPIO_EXTI13
+SH.GPXTI13.ConfNb=1
+USART2.IPParameters=VirtualMode-Asynchronous
+USART2.VirtualMode-Asynchronous=VM_ASYNC
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=NUCLEO-L452RE
+boardIOC=true
diff --git a/board/NUCLEO_STM32L452RE/GCC/hello_world/Makefile b/board/NUCLEO_STM32L452RE/GCC/hello_world/Makefile
new file mode 100644
index 00000000..521cf7a1
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/GCC/hello_world/Makefile
@@ -0,0 +1,228 @@
+##########################################################################################################################
+# File automatically-generated by tool: [projectgenerator] version: [2.30.0] date: [Tue Jun 04 19:50:17 CST 2019]
+##########################################################################################################################
+
+# ------------------------------------------------
+# Generic Makefile (based on gcc)
+#
+# ChangeLog :
+# 2017-02-10 - Several enhancements + project update mode
+# 2015-07-22 - first version
+# ------------------------------------------------
+
+######################################
+# target
+######################################
+TARGET = TencentOS_tiny
+
+
+######################################
+# building variables
+######################################
+# debug build?
+DEBUG = 1
+# optimization
+OPT = -Og
+
+TOP_DIR = ../../../../
+#######################################
+# paths
+#######################################
+# Build path
+BUILD_DIR = build
+
+######################################
+# source
+######################################
+# C sources
+
+KERNEL_SRC = \
+ ${wildcard $(TOP_DIR)/kernel/core/*.c} \
+ ${wildcard $(TOP_DIR)/kernel/pm/*.c}
+ C_SOURCES += $(KERNEL_SRC)
+ARCH_SRC = \
+ ${wildcard $(TOP_DIR)/arch/arm/arm-v7m/cortex-m4/gcc/*.c} \
+ ${wildcard $(TOP_DIR)/arch/arm/arm-v7m/common/*.c}
+ C_SOURCES += $(ARCH_SRC)
+CMSIS_SRC = \
+ ${wildcard $(TOP_DIR)/osal/cmsis_os/*.c}
+ C_SOURCES += $(CMSIS_SRC)
+
+HAL_DRIVER_SRC = \
+ $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Src/main.c \
+ $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Src/gpio.c \
+ $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Src/usart.c \
+ $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Src/stm32l4xx_it.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c \
+ $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c \
+ $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Src/system_stm32l4xx.c
+ C_SOURCES += $(HAL_DRIVER_SRC)
+
+# ASM sources
+ASM_SOURCES = \
+startup_stm32l452xx.s
+
+ASM_SOURCES_S = \
+$(TOP_DIR)/arch/arm/arm-v7m/cortex-m4/gcc/port_s.S
+
+#######################################
+# binaries
+#######################################
+PREFIX = arm-none-eabi-
+# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
+# either it can be added to the PATH environment variable.
+ifdef GCC_PATH
+CC = $(GCC_PATH)/$(PREFIX)gcc
+AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
+CP = $(GCC_PATH)/$(PREFIX)objcopy
+SZ = $(GCC_PATH)/$(PREFIX)size
+else
+CC = $(PREFIX)gcc
+AS = $(PREFIX)gcc -x assembler-with-cpp
+CP = $(PREFIX)objcopy
+SZ = $(PREFIX)size
+endif
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary -S
+
+#######################################
+# CFLAGS
+#######################################
+# cpu
+CPU = -mcpu=cortex-m4
+
+# fpu
+FPU = -mfpu=fpv4-sp-d16
+
+# float-abi
+FLOAT-ABI = -mfloat-abi=hard
+
+# mcu
+MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
+
+# macros for gcc
+# AS defines
+AS_DEFS =
+
+# C defines
+C_DEFS = \
+-DUSE_HAL_DRIVER \
+-DSTM32L452xx
+
+
+# AS includes
+AS_INCLUDES =
+
+# C includes
+KERNEL_INC = \
+ -I $(TOP_DIR)/kernel/core/include \
+ -I $(TOP_DIR)/kernel/pm/include \
+ -I $(TOP_DIR)/arch/arm/arm-v7m/common/include \
+ -I $(TOP_DIR)/arch/arm/arm-v7m/cortex-m4/gcc \
+ -I $(TOP_DIR)/board/NUCLEO_STM32L452RE/TOS_CONFIG
+ C_INCLUDES += $(KERNEL_INC)
+CMSIS_INC = \
+ -I $(TOP_DIR)/osal/cmsis_os
+ C_INCLUDES += $(CMSIS_INC)
+
+HAL_DRIVER_INC = \
+ -I $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Inc \
+ -I $(TOP_DIR)/board/NUCLEO_STM32L452RE/BSP/Inc/tickless \
+ -I $(TOP_DIR)/examples/hello_world \
+ -I $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Inc \
+ -I $(TOP_DIR)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Inc/Legacy \
+ -I $(TOP_DIR)/platform/vendor_bsp/st/CMSIS/Device/ST/STM32L4xx/Include \
+ -I $(TOP_DIR)/platform/vendor_bsp/st/CMSIS/Include
+ C_INCLUDES += $(HAL_DRIVER_INC)
+
+# compile gcc flags
+ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+ifeq ($(DEBUG), 1)
+CFLAGS += -g -gdwarf-2
+endif
+
+
+# Generate dependency information
+CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
+
+
+#######################################
+# LDFLAGS
+#######################################
+# link script
+LDSCRIPT = STM32L452RETx_FLASH.ld
+
+# libraries
+LIBS = -lc -lm -lnosys
+LIBDIR =
+LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
+
+# default action: build all
+all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
+
+
+#######################################
+# build the application
+#######################################
+# list of objects
+OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
+vpath %.c $(sort $(dir $(C_SOURCES)))
+# list of ASM program objects
+OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
+vpath %.s $(sort $(dir $(ASM_SOURCES)))
+OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES_S:.S=.o)))
+vpath %.S $(sort $(dir $(ASM_SOURCES_S)))
+
+$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
+ $(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
+
+$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
+ $(AS) -c $(CFLAGS) $< -o $@
+
+$(BUILD_DIR)/%.o: %.S Makefile | $(BUILD_DIR)
+ $(AS) -c $(CFLAGS) $< -o $@
+
+$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
+ $(CC) $(OBJECTS) $(LDFLAGS) -o $@
+ $(SZ) $@
+
+$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+ $(HEX) $< $@
+
+$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+ $(BIN) $< $@
+
+$(BUILD_DIR):
+ mkdir $@
+
+#######################################
+# clean up
+#######################################
+clean:
+ -rm -fR $(BUILD_DIR)
+
+#######################################
+# dependencies
+#######################################
+-include $(wildcard $(BUILD_DIR)/*.d)
+
+# *** EOF ***
\ No newline at end of file
diff --git a/board/NUCLEO_STM32L452RE/GCC/hello_world/STM32L452RETx_FLASH.ld b/board/NUCLEO_STM32L452RE/GCC/hello_world/STM32L452RETx_FLASH.ld
new file mode 100644
index 00000000..302c2ee7
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/GCC/hello_world/STM32L452RETx_FLASH.ld
@@ -0,0 +1,203 @@
+/*
+******************************************************************************
+**
+
+** File : LinkerScript.ld
+**
+** Author : Auto-generated by System Workbench for STM32
+**
+** Abstract : Linker script for STM32L452RETx series
+** 512Kbytes FLASH and 160Kbytes RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** © COPYRIGHT(c) 2019 STMicroelectronics
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+** 1. Redistributions of source code must retain the above copyright notice,
+** this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright notice,
+** this list of conditions and the following disclaimer in the documentation
+** and/or other materials provided with the distribution.
+** 3. Neither the name of STMicroelectronics nor the names of its contributors
+** may be used to endorse or promote products derived from this software
+** without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20028000; /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 160K
+FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(8);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(8);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(8);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(8);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(8);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(8);
+ } >FLASH
+
+ .ARM.extab :
+ {
+ . = ALIGN(8);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(8);
+ } >FLASH
+ .ARM : {
+ . = ALIGN(8);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(8);
+ } >FLASH
+
+ .preinit_array :
+ {
+ . = ALIGN(8);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(8);
+ } >FLASH
+
+ .init_array :
+ {
+ . = ALIGN(8);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(8);
+ } >FLASH
+ .fini_array :
+ {
+ . = ALIGN(8);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(8);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(8);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(8);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+
diff --git a/board/NUCLEO_STM32L452RE/GCC/hello_world/startup_stm32l452xx.s b/board/NUCLEO_STM32L452RE/GCC/hello_world/startup_stm32l452xx.s
new file mode 100644
index 00000000..d0d56349
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/GCC/hello_world/startup_stm32l452xx.s
@@ -0,0 +1,475 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32l452xx.s
+ * @author MCD Application Team
+ * @brief STM32L452xx devices vector table for GCC toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address,
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m4
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_PVM_IRQHandler
+ .word TAMP_STAMP_IRQHandler
+ .word RTC_WKUP_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word CAN1_TX_IRQHandler
+ .word CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word 0
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTC_Alarm_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SDMMC1_IRQHandler
+ .word 0
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word 0
+ .word TIM6_DAC_IRQHandler
+ .word 0
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word DFSDM1_FLT0_IRQHandler
+ .word DFSDM1_FLT1_IRQHandler
+ .word 0
+ .word COMP_IRQHandler
+ .word LPTIM1_IRQHandler
+ .word LPTIM2_IRQHandler
+ .word USB_IRQHandler
+ .word DMA2_Channel6_IRQHandler
+ .word DMA2_Channel7_IRQHandler
+ .word LPUART1_IRQHandler
+ .word QUADSPI_IRQHandler
+ .word I2C3_EV_IRQHandler
+ .word I2C3_ER_IRQHandler
+ .word SAI1_IRQHandler
+ .word 0
+ .word 0
+ .word TSC_IRQHandler
+ .word 0
+ .word 0
+ .word RNG_IRQHandler
+ .word FPU_IRQHandler
+ .word CRS_IRQHandler
+ .word I2C4_EV_IRQHandler
+ .word I2C4_ER_IRQHandler
+
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_PVM_IRQHandler
+ .thumb_set PVD_PVM_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak SDMMC1_IRQHandler
+ .thumb_set SDMMC1_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_IRQHandler
+ .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+ .weak DFSDM1_FLT0_IRQHandler
+ .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
+
+ .weak DFSDM1_FLT1_IRQHandler
+ .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
+
+ .weak COMP_IRQHandler
+ .thumb_set COMP_IRQHandler,Default_Handler
+
+ .weak LPTIM1_IRQHandler
+ .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+ .weak LPTIM2_IRQHandler
+ .thumb_set LPTIM2_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel6_IRQHandler
+ .thumb_set DMA2_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel7_IRQHandler
+ .thumb_set DMA2_Channel7_IRQHandler,Default_Handler
+
+ .weak LPUART1_IRQHandler
+ .thumb_set LPUART1_IRQHandler,Default_Handler
+
+ .weak QUADSPI_IRQHandler
+ .thumb_set QUADSPI_IRQHandler,Default_Handler
+
+ .weak I2C3_EV_IRQHandler
+ .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+ .weak I2C3_ER_IRQHandler
+ .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+ .weak SAI1_IRQHandler
+ .thumb_set SAI1_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak RNG_IRQHandler
+ .thumb_set RNG_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+
+ .weak CRS_IRQHandler
+ .thumb_set CRS_IRQHandler,Default_Handler
+
+ .weak I2C4_EV_IRQHandler
+ .thumb_set I2C4_EV_IRQHandler,Default_Handler
+
+ .weak I2C4_ER_IRQHandler
+ .thumb_set I2C4_ER_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/board/NUCLEO_STM32L452RE/TOS_CONFIG/tos_config.h b/board/NUCLEO_STM32L452RE/TOS_CONFIG/tos_config.h
new file mode 100644
index 00000000..78dd6a10
--- /dev/null
+++ b/board/NUCLEO_STM32L452RE/TOS_CONFIG/tos_config.h
@@ -0,0 +1,43 @@
+#ifndef _TOS_CONFIG_H_
+#define _TOS_CONFIG_H_
+
+#include "stm32l4xx.h"
+
+#define TOS_CFG_TASK_PRIO_MAX 10u
+
+#define TOS_CFG_ROUND_ROBIN_EN 1u
+
+#define TOS_CFG_OBJECT_VERIFY_EN 0u
+
+#define TOS_CFG_TASK_DYNAMIC_CREATE_EN 0u
+
+#define TOS_CFG_EVENT_EN 1u
+
+#define TOS_CFG_MMBLK_EN 1u
+
+#define TOS_CFG_MMHEAP_EN 1u
+
+#define TOS_CFG_MMHEAP_DEFAULT_POOL_SIZE 0x100
+
+#define TOS_CFG_MUTEX_EN 1u
+
+#define TOS_CFG_TIMER_EN 1u
+
+#define TOS_CFG_PWR_MGR_EN 0u
+
+#define TOS_CFG_TICKLESS_EN 0u
+
+#define TOS_CFG_SEM_EN 1u
+
+#define TOS_CFG_FAULT_BACKTRACE_EN 0u
+
+#define TOS_CFG_IDLE_TASK_STK_SIZE 512u
+
+#define TOS_CFG_CPU_TICK_PER_SECOND 1000u
+
+#define TOS_CFG_CPU_CLOCK (SystemCoreClock)
+
+#define TOS_CFG_TIMER_AS_PROC 1u
+
+#endif
+