PowLu/TencentOS-tiny
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Added the porting for i.MX RT1010 and i.MX RT1050

Browse Source 
Signed-off-by: Howard Liu <howardliu7874@hotmail.com>
This commit is contained in:
Howard Liu
2020-01-15 14:58:06 +08:00
parent 88bfbe999a
commit 6f8edaa5c5
1572 changed files with 1491417 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

147
board/NXP_EVK_IMXRT1010/bsp/Inc/board.h Normal file
View File

@@ -0,0 +1,147 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _BOARD_H_
#define _BOARD_H_
#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_gpio.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "MIMXRT1010-EVK"
/* The UART to use for debug messages. */
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART1
#define BOARD_DEBUG_UART_INSTANCE 1U
#define BOARD_DEBUG_UART_CLK_FREQ BOARD_DebugConsoleSrcFreq()
#define BOARD_UART_IRQ LPUART1_IRQn
#define BOARD_UART_IRQ_HANDLER LPUART1_IRQHandler
#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE (115200U)
#endif /* BOARD_DEBUG_UART_BAUDRATE */
/* @Brief Board accelerator sensor configuration */
#define BOARD_ACCEL_I2C_BASEADDR LPI2C1
#define BOARD_ACCEL_I2C_CLOCK_SOURCE_SELECT (0U)
#define BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER (5U)
#define BOARD_ACCEL_I2C_CLOCK_FREQ (CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8 / (BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER + 1U))
#define BOARD_CODEC_I2C_BASEADDR LPI2C1
#define BOARD_CODEC_I2C_INSTANCE 1U
#define BOARD_CODEC_I2C_CLOCK_SOURCE_SELECT (0U)
#define BOARD_CODEC_I2C_CLOCK_SOURCE_DIVIDER (5U)
#define BOARD_CODEC_I2C_CLOCK_FREQ (10000000U)
/*! @brief The USER_LED used for board */
#define LOGIC_LED_ON (0U)
#define LOGIC_LED_OFF (1U)
#ifndef BOARD_USER_LED_GPIO
#define BOARD_USER_LED_GPIO GPIO1
#endif
#ifndef BOARD_USER_LED_GPIO_PIN
#define BOARD_USER_LED_GPIO_PIN (11U)
#endif
#define USER_LED_INIT(output) \
GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, output); \
BOARD_USER_LED_GPIO->GDIR |= (1U << BOARD_USER_LED_GPIO_PIN) /*!< Enable target USER_LED */
#define USER_LED_OFF() \
GPIO_PortClear(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN) /*!< Turn off target USER_LED */
#define USER_LED_ON() GPIO_PortSet(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN) /*!<Turn on target USER_LED*/
#define USER_LED_TOGGLE() \
GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, \
0x1 ^ GPIO_PinRead(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN)) /*!< Toggle target USER_LED */
/*! @brief Define the port interrupt number for the board switches */
#ifndef BOARD_USER_BUTTON_GPIO
#define BOARD_USER_BUTTON_GPIO GPIO2
#endif
#ifndef BOARD_USER_BUTTON_GPIO_PIN
#define BOARD_USER_BUTTON_GPIO_PIN (5U)
#endif
#define BOARD_USER_BUTTON_IRQ GPIO2_Combined_0_15_IRQn
#define BOARD_USER_BUTTON_IRQ_HANDLER GPIO2_Combined_0_15_IRQHandler
#define BOARD_USER_BUTTON_NAME "SW4"
/*! @brief The flash size */
#define BOARD_FLASH_SIZE (0x1000000U)
/* USB PHY condfiguration */
#define BOARD_USB_PHY_D_CAL (0x0CU)
#define BOARD_USB_PHY_TXCAL45DP (0x06U)
#define BOARD_USB_PHY_TXCAL45DM (0x06U)
#define BOARD_ARDUINO_INT_IRQ (GPIO1_Combined_16_31_IRQn)
#define BOARD_ARDUINO_I2C_IRQ (LPI2C1_IRQn)
#define BOARD_ARDUINO_I2C_INDEX (1)
/*! @brief The WIFI-QCA shield pin. */
#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO GPIO1 /*!< GPIO device name: GPIO */
#define BOARD_INITSILEX2401SHIELD_PWRON_PORT 1U /*!< PORT device index: 1 */
#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO_PIN 8U /*!< PIO1 pin index: 8 */
#define BOARD_INITSILEX2401SHIELD_PWRON_PIN_NAME GPIO1_08 /*!< Pin name */
#define BOARD_INITSILEX2401SHIELD_PWRON_LABEL "PWRON" /*!< Label */
#define BOARD_INITSILEX2401SHIELD_PWRON_NAME "PWRON" /*!< Identifier name */
#define BOARD_INITSILEX2401SHIELD_PWRON_DIRECTION kGPIO_DigitalOutput /*!< Direction */
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO GPIO1 /*!< GPIO device name: GPIO */
#define BOARD_INITSILEX2401SHIELD_IRQ_PORT 1U /*!< PORT device index: 1 */
#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN 4U /*!< PIO1 pin index: 4 */
#define BOARD_INITSILEX2401SHIELD_IRQ_PIN_NAME GPIO1_04 /*!< Pin name */
#define BOARD_INITSILEX2401SHIELD_IRQ_LABEL "IRQ" /*!< Label */
#define BOARD_INITSILEX2401SHIELD_IRQ_NAME "IRQ" /*!< Identifier name */
#define BOARD_INITSILEX2401SHIELD_IRQ_DIRECTION kGPIO_DigitalInput /*!< Direction */
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*******************************************************************************
* API
******************************************************************************/
uint32_t BOARD_DebugConsoleSrcFreq(void);
void BOARD_InitDebugConsole(void);
void BOARD_ConfigMPU(void);
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_InitDebugConsole(void);
void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz);
status_t BOARD_LPI2C_Send(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *txBuff,
uint8_t txBuffSize);
status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize);
void BOARD_Accel_I2C_Init(void);
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
status_t BOARD_Accel_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Codec_I2C_Init(void);
status_t BOARD_Codec_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Codec_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
#endif /* SDK_I2C_BASED_COMPONENT_USED */
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* _BOARD_H_ */

104
board/NXP_EVK_IMXRT1010/bsp/Inc/clock_config.h Normal file
View File

@@ -0,0 +1,104 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _CLOCK_CONFIG_H_
#define _CLOCK_CONFIG_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes default configuration of clocks.
*
*/
void BOARD_InitBootClocks(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/*******************************************************************************
* Definitions for BOARD_BootClockRUN configuration
******************************************************************************/
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */
/* Clock outputs (values are in Hz): */
#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL
#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL
#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL
#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL
#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL
#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL
#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL
#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL
#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL
#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL
#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL
#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL
#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL
#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL
#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL
#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL
#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL
#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL
#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL
#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL
#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 0UL
/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
*/
extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
*/
extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
/*******************************************************************************
* API for BOARD_BootClockRUN configuration
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus*/
/*!
* @brief This function executes configuration of clocks.
*
*/
void BOARD_BootClockRUN(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus*/
#endif /* _CLOCK_CONFIG_H_ */

73
board/NXP_EVK_IMXRT1010/bsp/Inc/pin_mux.h Normal file
View File

@@ -0,0 +1,73 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
#ifndef _PIN_MUX_H_
#define _PIN_MUX_H_
/***********************************************************************************************************************
* Definitions
**********************************************************************************************************************/
/*! @brief Direction type */
typedef enum _pin_mux_direction
{
kPIN_MUX_DirectionInput = 0U, /* Input direction */
kPIN_MUX_DirectionOutput = 1U, /* Output direction */
kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */
} pin_mux_direction_t;
/*!
* @addtogroup pin_mux
* @{
*/
/***********************************************************************************************************************
* API
**********************************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Calls initialization functions.
*
*/
void BOARD_InitBootPins(void);
/* GPIO_09 (number 3), LPUART1_RXD */
#define BOARD_LPUART1_RXD_PERIPHERAL LPUART1 /*!< Device name: LPUART1 */
#define BOARD_LPUART1_RXD_SIGNAL RXD /*!< LPUART1 signal: RXD */
/* GPIO_10 (number 2), LPUART1_TXD */
#define BOARD_LPUART1_TXD_PERIPHERAL LPUART1 /*!< Device name: LPUART1 */
#define BOARD_LPUART1_TXD_SIGNAL TXD /*!< LPUART1 signal: TXD */
/*!
* @brief Configures pin routing and optionally pin electrical features.
*
*/
void BOARD_InitPins(void);
#if defined(__cplusplus)
}
#endif
/*!
* @}
*/
#endif /* _PIN_MUX_H_ */
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/

295
board/NXP_EVK_IMXRT1010/bsp/Src/board.c Normal file
View File

@@ -0,0 +1,295 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_common.h"
#include "fsl_debug_console.h"
#include "board.h"
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
#include "fsl_lpi2c.h"
#endif /* SDK_I2C_BASED_COMPONENT_USED */
#include "fsl_iomuxc.h"
#include "tos_k.h"
/*******************************************************************************
* Variables
******************************************************************************/
/*******************************************************************************
* Code
******************************************************************************/
void SysTick_Handler(void)
{
if (tos_knl_is_running())
{
tos_knl_irq_enter();
tos_tick_handler();
tos_knl_irq_leave();
}
}
/* Get debug console frequency. */
uint32_t BOARD_DebugConsoleSrcFreq(void)
{
uint32_t freq;
/* To make it simple, we assume default PLL and divider settings, and the only variable
from application is use PLL3 source or OSC source */
if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */
{
freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
}
else
{
freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
}
return freq;
}
/* Initialize debug console. */
void BOARD_InitDebugConsole(void)
{
uint32_t uartClkSrcFreq = BOARD_DebugConsoleSrcFreq();
DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE, BOARD_DEBUG_UART_BAUDRATE, BOARD_DEBUG_UART_TYPE, uartClkSrcFreq);
}
/* MPU configuration. */
void BOARD_ConfigMPU(void)
{
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
extern uint32_t Image$$RW_m_ncache$$Base[];
/* RW_m_ncache_unused is a auxiliary region which is used to get the whole size of noncache section */
extern uint32_t Image$$RW_m_ncache_unused$$Base[];
extern uint32_t Image$$RW_m_ncache_unused$$ZI$$Limit[];
uint32_t nonCacheStart = (uint32_t)Image$$RW_m_ncache$$Base;
uint32_t size = ((uint32_t)Image$$RW_m_ncache_unused$$Base == nonCacheStart) ?
0 :
((uint32_t)Image$$RW_m_ncache_unused$$ZI$$Limit - nonCacheStart);
#elif defined(__MCUXPRESSO)
extern uint32_t __base_NCACHE_REGION;
extern uint32_t __top_NCACHE_REGION;
uint32_t nonCacheStart = (uint32_t)(&__base_NCACHE_REGION);
uint32_t size = (uint32_t)(&__top_NCACHE_REGION) - nonCacheStart;
#elif defined(__ICCARM__) || defined(__GNUC__)
extern uint32_t __NCACHE_REGION_START[];
extern uint32_t __NCACHE_REGION_SIZE[];
uint32_t nonCacheStart = (uint32_t)__NCACHE_REGION_START;
uint32_t size = (uint32_t)__NCACHE_REGION_SIZE;
#endif
uint32_t i = 0;
/* Disable I cache and D cache */
if (SCB_CCR_IC_Msk == (SCB_CCR_IC_Msk & SCB->CCR))
{
SCB_DisableICache();
}
if (SCB_CCR_DC_Msk == (SCB_CCR_DC_Msk & SCB->CCR))
{
SCB_DisableDCache();
}
/* Disable MPU */
ARM_MPU_Disable();
/* MPU configure:
* Use ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable,
* SubRegionDisable, Size)
* API in mpu_armv7.h.
* param DisableExec Instruction access (XN) disable bit,0=instruction fetches enabled, 1=instruction fetches
* disabled.
* param AccessPermission Data access permissions, allows you to configure read/write access for User and
* Privileged mode.
* Use MACROS defined in mpu_armv7.h:
* ARM_MPU_AP_NONE/ARM_MPU_AP_PRIV/ARM_MPU_AP_URO/ARM_MPU_AP_FULL/ARM_MPU_AP_PRO/ARM_MPU_AP_RO
* Combine TypeExtField/IsShareable/IsCacheable/IsBufferable to configure MPU memory access attributes.
* TypeExtField IsShareable IsCacheable IsBufferable Memory Attribtue Shareability Cache
* 0 x 0 0 Strongly Ordered shareable
* 0 x 0 1 Device shareable
* 0 0 1 0 Normal not shareable Outer and inner write
* through no write allocate
* 0 0 1 1 Normal not shareable Outer and inner write
* back no write allocate
* 0 1 1 0 Normal shareable Outer and inner write
* through no write allocate
* 0 1 1 1 Normal shareable Outer and inner write
* back no write allocate
* 1 0 0 0 Normal not shareable outer and inner
* noncache
* 1 1 0 0 Normal shareable outer and inner
* noncache
* 1 0 1 1 Normal not shareable outer and inner write
* back write/read acllocate
* 1 1 1 1 Normal shareable outer and inner write
* back write/read acllocate
* 2 x 0 0 Device not shareable
* Above are normal use settings, if your want to see more details or want to config different inner/outter cache
* policy.
* please refer to Table 4-55 /4-56 in arm cortex-M7 generic user guide <dui0646b_cortex_m7_dgug.pdf>
* param SubRegionDisable Sub-region disable field. 0=sub-region is enabled, 1=sub-region is disabled.
* param Size Region size of the region to be configured. use ARM_MPU_REGION_SIZE_xxx MACRO in
* mpu_armv7.h.
*/
/* Region 0 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(0, 0x80000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
/* Region 1 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(1, 0x60000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
#if defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)
/* Region 2 setting: Memory with Normal type, not shareable, outer/inner write back. */
MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_16MB);
#endif
/* Region 3 setting: Memory with Device type, not shareable, non-cacheable. */
MPU->RBAR = ARM_MPU_RBAR(3, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
/* Region 4 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_32KB);
/* Region 5 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(5, 0x20000000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_32KB);
/* Region 6 setting: Memory with Normal type, not shareable, outer/inner write back */
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_64KB);
while ((size >> i) > 0x1U)
{
i++;
}
if (i != 0)
{
/* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
assert(!(nonCacheStart % size));
assert(size == (uint32_t)(1 << i));
assert(i >= 5);
/* Region 7 setting: Memory with Normal type, not shareable, non-cacheable */
MPU->RBAR = ARM_MPU_RBAR(7, nonCacheStart);
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 0, 0, 0, 0, i - 1);
}
/* Enable MPU */
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk);
/* Enable I cache and D cache */
SCB_EnableDCache();
SCB_EnableICache();
}
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz)
{
lpi2c_master_config_t lpi2cConfig = {0};
/*
* lpi2cConfig.debugEnable = false;
* lpi2cConfig.ignoreAck = false;
* lpi2cConfig.pinConfig = kLPI2C_2PinOpenDrain;
* lpi2cConfig.baudRate_Hz = 100000U;
* lpi2cConfig.busIdleTimeout_ns = 0;
* lpi2cConfig.pinLowTimeout_ns = 0;
* lpi2cConfig.sdaGlitchFilterWidth_ns = 0;
* lpi2cConfig.sclGlitchFilterWidth_ns = 0;
*/
LPI2C_MasterGetDefaultConfig(&lpi2cConfig);
LPI2C_MasterInit(base, &lpi2cConfig, clkSrc_Hz);
}
status_t BOARD_LPI2C_Send(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subAddressSize,
uint8_t *txBuff,
uint8_t txBuffSize)
{
lpi2c_master_transfer_t xfer;
xfer.flags = kLPI2C_TransferDefaultFlag;
xfer.slaveAddress = deviceAddress;
xfer.direction = kLPI2C_Write;
xfer.subaddress = subAddress;
xfer.subaddressSize = subAddressSize;
xfer.data = txBuff;
xfer.dataSize = txBuffSize;
return LPI2C_MasterTransferBlocking(base, &xfer);
}
status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subAddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize)
{
lpi2c_master_transfer_t xfer;
xfer.flags = kLPI2C_TransferDefaultFlag;
xfer.slaveAddress = deviceAddress;
xfer.direction = kLPI2C_Read;
xfer.subaddress = subAddress;
xfer.subaddressSize = subAddressSize;
xfer.data = rxBuff;
xfer.dataSize = rxBuffSize;
return LPI2C_MasterTransferBlocking(base, &xfer);
}
void BOARD_Accel_I2C_Init(void)
{
BOARD_LPI2C_Init(BOARD_ACCEL_I2C_BASEADDR, BOARD_ACCEL_I2C_CLOCK_FREQ);
}
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff)
{
uint8_t data = (uint8_t)txBuff;
return BOARD_LPI2C_Send(BOARD_ACCEL_I2C_BASEADDR, deviceAddress, subAddress, subaddressSize, &data, 1);
}
status_t BOARD_Accel_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
{
return BOARD_LPI2C_Receive(BOARD_ACCEL_I2C_BASEADDR, deviceAddress, subAddress, subaddressSize, rxBuff, rxBuffSize);
}
void BOARD_Codec_I2C_Init(void)
{
BOARD_LPI2C_Init(BOARD_CODEC_I2C_BASEADDR, BOARD_CODEC_I2C_CLOCK_FREQ);
}
status_t BOARD_Codec_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize)
{
return BOARD_LPI2C_Send(BOARD_CODEC_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, (uint8_t *)txBuff,
txBuffSize);
}
status_t BOARD_Codec_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
{
return BOARD_LPI2C_Receive(BOARD_CODEC_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, rxBuff, rxBuffSize);
}
#endif /*SDK_I2C_BASED_COMPONENT_USED */
#if defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)
/* SystemInitHook */
void SystemInitHook(void)
{
/* When set this bit, FlexSPI will fetch more data than AHB burst required to meet the alignment requirement. */
FLEXSPI->AHBCR |= FLEXSPI_AHBCR_READADDROPT_MASK;
}
#endif

345
board/NXP_EVK_IMXRT1010/bsp/Src/clock_config.c Normal file
View File

@@ -0,0 +1,345 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* How to setup clock using clock driver functions:
*
* 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
*
* 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
*
* 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
*
* 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
*
* 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
*
*/
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Clocks v6.0
processor: MIMXRT1011xxxxx
package_id: MIMXRT1011DAE5A
mcu_data: ksdk2_0
processor_version: 0.0.1
board: MIMXRT1010-EVK
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
#include "clock_config.h"
#include "fsl_iomuxc.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*******************************************************************************
* Variables
******************************************************************************/
/* System clock frequency. */
extern uint32_t SystemCoreClock;
/*******************************************************************************
************************ BOARD_InitBootClocks function ************************
******************************************************************************/
void BOARD_InitBootClocks(void)
{
BOARD_BootClockRUN();
}
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!Configuration
name: BOARD_BootClockRUN
called_from_default_init: true
outputs:
- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
- {id: CLK_1M.outFreq, value: 1 MHz}
- {id: CLK_24M.outFreq, value: 24 MHz}
- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
- {id: TRACE_CLK_ROOT.outFreq, value: 352/3 MHz}
- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
settings:
- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
- {id: CCM.IPG_PODF.scale, value: '4'}
- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
- {id: CCM.TRACE_PODF.scale, value: '3', locked: true}
- {id: CCM_ANALOG.PLL2.denom, value: '1'}
- {id: CCM_ANALOG.PLL2.div, value: '22'}
- {id: CCM_ANALOG.PLL2.num, value: '0'}
- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
sources:
- {id: XTALOSC24M.OSC.outFreq, value: 24 MHz, enabled: true}
- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
/*******************************************************************************
* Variables for BOARD_BootClockRUN configuration
******************************************************************************/
const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = {
.loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
.numerator = 0, /* 30 bit numerator of fractional loop divider */
.denominator = 1, /* 30 bit denominator of fractional loop divider */
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
};
const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = {
.loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
};
const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = {
.enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
};
/*******************************************************************************
* Code for BOARD_BootClockRUN configuration
******************************************************************************/
void BOARD_BootClockRUN(void)
{
/* Init RTC OSC clock frequency. */
CLOCK_SetRtcXtalFreq(32768U);
/* Enable 1MHz clock output. */
XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
/* Use free 1MHz clock output. */
XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
/* Set XTAL 24MHz clock frequency. */
CLOCK_SetXtalFreq(24000000U);
/* Enable XTAL 24MHz clock source. */
CLOCK_InitExternalClk(0);
/* Enable internal RC. */
CLOCK_InitRcOsc24M();
/* Switch clock source to external OSC. */
CLOCK_SwitchOsc(kCLOCK_XtalOsc);
/* Set Oscillator ready counter value. */
CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
/* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
/* Setting the VDD_SOC to 1.5V. It is necessary to config CORE to 500Mhz. */
DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
/* Waiting for DCDC_STS_DC_OK bit is asserted */
while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
{
}
/* Set AHB_PODF. */
CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
/* Disable IPG clock gate. */
CLOCK_DisableClock(kCLOCK_Adc1);
CLOCK_DisableClock(kCLOCK_Xbar1);
/* Set IPG_PODF. */
CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
/* Disable PERCLK clock gate. */
CLOCK_DisableClock(kCLOCK_Gpt1);
CLOCK_DisableClock(kCLOCK_Gpt1S);
CLOCK_DisableClock(kCLOCK_Gpt2);
CLOCK_DisableClock(kCLOCK_Gpt2S);
CLOCK_DisableClock(kCLOCK_Pit);
/* Set PERCLK_PODF. */
CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
/* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
* With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left
* unchanged. Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as
* well.*/
#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
/* Disable Flexspi clock gate. */
CLOCK_DisableClock(kCLOCK_FlexSpi);
/* Set FLEXSPI_PODF. */
CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
/* Set Flexspi clock source. */
CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
#endif
/* Disable ADC_ACLK_EN clock gate. */
CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
/* Set ADC_ACLK_PODF. */
CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
/* Disable LPSPI clock gate. */
CLOCK_DisableClock(kCLOCK_Lpspi1);
CLOCK_DisableClock(kCLOCK_Lpspi2);
/* Set LPSPI_PODF. */
CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
/* Set Lpspi clock source. */
CLOCK_SetMux(kCLOCK_LpspiMux, 2);
/* Disable TRACE clock gate. */
CLOCK_DisableClock(kCLOCK_Trace);
/* Set TRACE_PODF. */
CLOCK_SetDiv(kCLOCK_TraceDiv, 2);
/* Set Trace clock source. */
CLOCK_SetMux(kCLOCK_TraceMux, 2);
/* Disable SAI1 clock gate. */
CLOCK_DisableClock(kCLOCK_Sai1);
/* Set SAI1_CLK_PRED. */
CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
/* Set SAI1_CLK_PODF. */
CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
/* Set Sai1 clock source. */
CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
/* Disable SAI3 clock gate. */
CLOCK_DisableClock(kCLOCK_Sai3);
/* Set SAI3_CLK_PRED. */
CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
/* Set SAI3_CLK_PODF. */
CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
/* Set Sai3 clock source. */
CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
/* Disable Lpi2c clock gate. */
CLOCK_DisableClock(kCLOCK_Lpi2c1);
CLOCK_DisableClock(kCLOCK_Lpi2c2);
/* Set LPI2C_CLK_PODF. */
CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
/* Set Lpi2c clock source. */
CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
/* Disable UART clock gate. */
CLOCK_DisableClock(kCLOCK_Lpuart1);
CLOCK_DisableClock(kCLOCK_Lpuart2);
CLOCK_DisableClock(kCLOCK_Lpuart3);
CLOCK_DisableClock(kCLOCK_Lpuart4);
/* Set UART_CLK_PODF. */
CLOCK_SetDiv(kCLOCK_UartDiv, 0);
/* Set Uart clock source. */
CLOCK_SetMux(kCLOCK_UartMux, 0);
/* Disable SPDIF clock gate. */
CLOCK_DisableClock(kCLOCK_Spdif);
/* Set SPDIF0_CLK_PRED. */
CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
/* Set SPDIF0_CLK_PODF. */
CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
/* Set Spdif clock source. */
CLOCK_SetMux(kCLOCK_SpdifMux, 3);
/* Disable Flexio1 clock gate. */
CLOCK_DisableClock(kCLOCK_Flexio1);
/* Set FLEXIO1_CLK_PRED. */
CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
/* Set FLEXIO1_CLK_PODF. */
CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
/* Set Flexio1 clock source. */
CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
/* Set Pll3 sw clock source. */
CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
/* Init System PLL. */
CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
/* Init System pfd0. */
CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
/* Init System pfd1. */
CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
/* Init System pfd2. */
CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
/* Init System pfd3. */
CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
/* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
* With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left
* unchanged. Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as
* well.*/
#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
/* Init Usb1 PLL. */
CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
/* Init Usb1 pfd0. */
CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
/* Init Usb1 pfd1. */
CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
/* Init Usb1 pfd2. */
CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
/* Init Usb1 pfd3. */
CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
/* Disable Usb1 PLL output for USBPHY1. */
CCM_ANALOG->PLL_USB1 &= ~CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK;
#endif
/* DeInit Audio PLL. */
CLOCK_DeinitAudioPll();
/* Bypass Audio PLL. */
CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
/* Set divider for Audio PLL. */
CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
/* Enable Audio PLL output. */
CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
/* Init Enet PLL. */
CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
/* Set preperiph clock source. */
CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
/* Set periph clock source. */
CLOCK_SetMux(kCLOCK_PeriphMux, 0);
/* Set periph clock2 clock source. */
CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
/* Set per clock source. */
CLOCK_SetMux(kCLOCK_PerclkMux, 0);
/* Set clock out1 divider. */
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
/* Set clock out1 source. */
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
/* Set clock out2 divider. */
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
/* Set clock out2 source. */
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
/* Set clock out1 drives clock out1. */
CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
/* Disable clock out1. */
CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
/* Disable clock out2. */
CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
/* Set SAI1 MCLK1 clock source. */
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
/* Set SAI1 MCLK2 clock source. */
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
/* Set SAI1 MCLK3 clock source. */
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
/* Set SAI3 MCLK3 clock source. */
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
/* Set MQS configuration. */
IOMUXC_MQSConfig(IOMUXC_GPR, kIOMUXC_MqsPwmOverSampleRate32, 0);
/* Set GPT1 High frequency reference clock source. */
IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
/* Set GPT2 High frequency reference clock source. */
IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
/* Set SystemCoreClock variable. */
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
}

76
board/NXP_EVK_IMXRT1010/bsp/Src/hello_world.c Normal file
View File

@@ -0,0 +1,76 @@
/*
* Copyright (c) 2013 - 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_device_registers.h"
#include "fsl_debug_console.h"
#include "board.h"
#include "pin_mux.h"
#include "clock_config.h"
#include "cmsis_os.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*******************************************************************************
* Prototypes
******************************************************************************/
/*******************************************************************************
* Code
******************************************************************************/
#define TASK1_STK_SIZE 512
void task1(void *arg);
osThreadDef(task1, osPriorityNormal, 1, TASK1_STK_SIZE);
#define TASK2_STK_SIZE 512
void task2(void *arg);
osThreadDef(task2, osPriorityNormal, 1, TASK2_STK_SIZE);
void task1(void *arg)
{
int count = 0;
while(1)
{
PRINTF("********This is Task 1, count is %d \r\n",count++);
osDelay(1000);
}
}
void task2(void *arg)
{
int count = 0;
while(1)
{
PRINTF("++++++++This is Task 2, count is %d \r\n",count++);
osDelay(2000);
}
}
/*!
* @brief Main function
*/
int main(void)
{
/* Init board hardware. */
BOARD_ConfigMPU();
BOARD_InitPins();
BOARD_BootClockRUN();
BOARD_InitDebugConsole();
PRINTF("hello world from i.MX RT1010.\r\n");
PRINTF("Welcome to TencentOS tiny\r\n");
osKernelInitialize(); // TencentOS Tiny kernel initialize
osThreadCreate(osThread(task1), NULL); // Create task1
osThreadCreate(osThread(task2), NULL); // Create task2
osKernelStart(); // Start TencentOS Tiny
}

92
board/NXP_EVK_IMXRT1010/bsp/Src/pin_mux.c Normal file
View File

@@ -0,0 +1,92 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v6.0
processor: MIMXRT1011xxxxx
package_id: MIMXRT1011DAE5A
mcu_data: ksdk2_0
processor_version: 0.0.4
pin_labels:
- {pin_num: '3', pin_signal: GPIO_09, label: LPUART1_RXD, identifier: UART1_RXD;BORD_UART1_RXD;BOARD_UART1_RXD;LPUART1_RXD}
- {pin_num: '2', pin_signal: GPIO_10, label: LPUART1_TXD, identifier: UART1_TXD;LPUART1_TXD}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
BOARD_InitPins();
}
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', prefix: BOARD_, coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09, identifier: LPUART1_RXD, slew_rate: Slow, software_input_on: Disable, open_drain: Disable,
speed: MHZ_150, drive_strength: R0_4, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10, identifier: LPUART1_TXD, slew_rate: Slow, software_input_on: Disable, open_drain: Disable,
speed: MHZ_150, drive_strength: R0_4, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitPins(void) {
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */
IOMUXC_SetPinMux(
IOMUXC_GPIO_09_LPUART1_RXD, /* GPIO_09 is configured as LPUART1_RXD */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux(
IOMUXC_GPIO_10_LPUART1_TXD, /* GPIO_10 is configured as LPUART1_TXD */
0U); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_09_LPUART1_RXD, /* GPIO_09 PAD functional properties : */
0x10A0U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/4
Speed Field: fast(150MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig(
IOMUXC_GPIO_10_LPUART1_TXD, /* GPIO_10 PAD functional properties : */
0x10A0U); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/4
Speed Field: fast(150MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/

48
board/NXP_EVK_IMXRT1010/bsp/xip/evkmimxrt1010_flexspi_nor_config.c Normal file
View File

@@ -0,0 +1,48 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1010_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 16u * 1024u * 1024u,
.lookupTable =
{
// Read LUTs
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

267
board/NXP_EVK_IMXRT1010/bsp/xip/evkmimxrt1010_flexspi_nor_config.h Normal file
View File

@@ -0,0 +1,267 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */

93
board/NXP_EVK_IMXRT1010/iar/hello_world/MIMXRT1011xxxxx_flexspi_nor.icf Normal file
View File

@@ -0,0 +1,93 @@
/*
** ###################################################################
** Processors: MIMXRT1011CAE4A
** MIMXRT1011DAE5A
**
** Compiler: IAR ANSI C/C++ Compiler for ARM
** Reference manual: IMXRT1010RM Rev.A, 03/2019
** Version: rev. 0.1, 2019-02-14
** Build: b190716
**
** Abstract:
** Linker file for the IAR ANSI C/C++ Compiler for ARM
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2019 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** ###################################################################
*/
define symbol m_interrupts_start = 0x60002000;
define symbol m_interrupts_end = 0x600023FF;
define symbol m_text_start = 0x60002400;
define symbol m_text_end = 0x60FFFFFF;
define symbol m_data_start = 0x20000000;
define symbol m_data_end = 0x20007FFF;
define symbol m_data2_start = 0x20200000;
define symbol m_data2_end = 0x2020FFFF;
define exported symbol m_boot_hdr_conf_start = 0x60000400;
define symbol m_boot_hdr_ivt_start = 0x60001000;
define symbol m_boot_hdr_boot_data_start = 0x60001020;
define symbol m_boot_hdr_dcd_data_start = 0x60001030;
/* Sizes */
if (isdefinedsymbol(__stack_size__)) {
define symbol __size_cstack__ = __stack_size__;
} else {
define symbol __size_cstack__ = 0x0400;
}
if (isdefinedsymbol(__heap_size__)) {
define symbol __size_heap__ = __heap_size__;
} else {
define symbol __size_heap__ = 0x0400;
}
define exported symbol __NCACHE_REGION_START = m_data2_start;
define exported symbol __NCACHE_REGION_SIZE = 0x0;
define exported symbol __VECTOR_TABLE = m_interrupts_start;
define exported symbol __VECTOR_RAM = m_interrupts_start;
define exported symbol __RAM_VECTOR_TABLE_SIZE = 0x0;
define memory mem with size = 4G;
define region TEXT_region = mem:[from m_interrupts_start to m_interrupts_end]
| mem:[from m_text_start to m_text_end];
define region DATA_region = mem:[from m_data_start to m_data_end-__size_cstack__];
define region DATA2_region = mem:[from m_data2_start to m_data2_end];
define region CSTACK_region = mem:[from m_data_end-__size_cstack__+1 to m_data_end];
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block RW { readwrite };
define block ZI { zi };
define block NCACHE_VAR { section NonCacheable , section NonCacheable.init };
initialize by copy { readwrite, section .textrw };
do not initialize { section .noinit };
place at address mem: m_interrupts_start { readonly section .intvec };
place at address mem:m_boot_hdr_conf_start { section .boot_hdr.conf };
place at address mem:m_boot_hdr_ivt_start { section .boot_hdr.ivt };
place at address mem:m_boot_hdr_boot_data_start { readonly section .boot_hdr.boot_data };
place at address mem:m_boot_hdr_dcd_data_start { readonly section .boot_hdr.dcd_data };
keep{ section .boot_hdr.conf, section .boot_hdr.ivt, section .boot_hdr.boot_data, section .boot_hdr.dcd_data };
place in TEXT_region { readonly };
place in DATA_region { block RW };
place in DATA_region { block ZI };
place in DATA_region { last block HEAP };
place in DATA_region { block NCACHE_VAR };
place in CSTACK_region { block CSTACK };

81
board/NXP_EVK_IMXRT1010/iar/hello_world/MIMXRT1011xxxxx_ram.icf Normal file
View File

@@ -0,0 +1,81 @@
/*
** ###################################################################
** Processors: MIMXRT1011CAE4A
** MIMXRT1011DAE5A
**
** Compiler: IAR ANSI C/C++ Compiler for ARM
** Reference manual: IMXRT1010RM Rev.A, 03/2019
** Version: rev. 0.1, 2019-02-14
** Build: b190716
**
** Abstract:
** Linker file for the IAR ANSI C/C++ Compiler for ARM
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2019 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** ###################################################################
*/
define symbol m_interrupts_start = 0x00000000;
define symbol m_interrupts_end = 0x000003FF;
define symbol m_text_start = 0x00000400;
define symbol m_text_end = 0x00007FFF;
define symbol m_data_start = 0x20000000;
define symbol m_data_end = 0x20007FFF;
define symbol m_data2_start = 0x20200000;
define symbol m_data2_end = 0x2020FFFF;
/* Sizes */
if (isdefinedsymbol(__stack_size__)) {
define symbol __size_cstack__ = __stack_size__;
} else {
define symbol __size_cstack__ = 0x0400;
}
if (isdefinedsymbol(__heap_size__)) {
define symbol __size_heap__ = __heap_size__;
} else {
define symbol __size_heap__ = 0x0400;
}
define exported symbol __NCACHE_REGION_START = m_data2_start;
define exported symbol __NCACHE_REGION_SIZE = 0x0;
define exported symbol __VECTOR_TABLE = m_interrupts_start;
define exported symbol __VECTOR_RAM = m_interrupts_start;
define exported symbol __RAM_VECTOR_TABLE_SIZE = 0x0;
define memory mem with size = 4G;
define region TEXT_region = mem:[from m_interrupts_start to m_interrupts_end]
| mem:[from m_text_start to m_text_end];
define region DATA_region = mem:[from m_data_start to m_data_end-__size_cstack__];
define region DATA2_region = mem:[from m_data2_start to m_data2_end];
define region CSTACK_region = mem:[from m_data_end-__size_cstack__+1 to m_data_end];
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block RW { readwrite };
define block ZI { zi };
define block NCACHE_VAR { section NonCacheable , section NonCacheable.init };
initialize by copy { readwrite, section .textrw };
do not initialize { section .noinit };
place at address mem: m_interrupts_start { readonly section .intvec };
place in TEXT_region { readonly };
place in DATA_region { block RW };
place in DATA_region { block ZI };
place in DATA_region { last block HEAP };
place in DATA_region { block NCACHE_VAR };
place in CSTACK_region { block CSTACK };

81
board/NXP_EVK_IMXRT1010/iar/hello_world/MIMXRT1011xxxxx_ram_0x1400.icf Normal file
View File

@@ -0,0 +1,81 @@
/*
** ###################################################################
** Processors: MIMXRT1011CAE4A
** MIMXRT1011DAE5A
**
** Compiler: IAR ANSI C/C++ Compiler for ARM
** Reference manual: IMXRT1010RM Rev.A, 03/2019
** Version: rev. 0.1, 2019-02-14
** Build: b190716
**
** Abstract:
** Linker file for the IAR ANSI C/C++ Compiler for ARM
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2019 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** ###################################################################
*/
define symbol m_interrupts_start = 0x00001400;
define symbol m_interrupts_end = 0x000017FF;
define symbol m_text_start = 0x00001800;
define symbol m_text_end = 0x00007FFF;
define symbol m_data_start = 0x20000000;
define symbol m_data_end = 0x20007FFF;
define symbol m_data2_start = 0x20200000;
define symbol m_data2_end = 0x2020FFFF;
/* Sizes */
if (isdefinedsymbol(__stack_size__)) {
define symbol __size_cstack__ = __stack_size__;
} else {
define symbol __size_cstack__ = 0x0400;
}
if (isdefinedsymbol(__heap_size__)) {
define symbol __size_heap__ = __heap_size__;
} else {
define symbol __size_heap__ = 0x0400;
}
define exported symbol __NCACHE_REGION_START = m_data2_start;
define exported symbol __NCACHE_REGION_SIZE = 0x0;
define exported symbol __VECTOR_TABLE = m_interrupts_start;
define exported symbol __VECTOR_RAM = m_interrupts_start;
define exported symbol __RAM_VECTOR_TABLE_SIZE = 0x0;
define memory mem with size = 4G;
define region TEXT_region = mem:[from m_interrupts_start to m_interrupts_end]
| mem:[from m_text_start to m_text_end];
define region DATA_region = mem:[from m_data_start to m_data_end-__size_cstack__];
define region DATA2_region = mem:[from m_data2_start to m_data2_end];
define region CSTACK_region = mem:[from m_data_end-__size_cstack__+1 to m_data_end];
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block RW { readwrite };
define block ZI { zi };
define block NCACHE_VAR { section NonCacheable , section NonCacheable.init };
initialize by copy { readwrite, section .textrw };
do not initialize { section .noinit };
place at address mem: m_interrupts_start { readonly section .intvec };
place in TEXT_region { readonly };
place in DATA_region { block RW };
place in DATA_region { block ZI };
place in DATA_region { last block HEAP };
place in DATA_region { block NCACHE_VAR };
place in CSTACK_region { block CSTACK };

8914
board/NXP_EVK_IMXRT1010/iar/hello_world/hello_world.ewd Normal file
View File

File diff suppressed because it is too large Load Diff

6857
board/NXP_EVK_IMXRT1010/iar/hello_world/hello_world.ewp Normal file
View File

File diff suppressed because it is too large Load Diff

77
board/NXP_EVK_IMXRT1010/iar/hello_world/hello_world.eww Normal file
View File

@@ -0,0 +1,77 @@
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<batchBuild>
<batchDefinition>
<name>all</name>
<member>
<project>hello_world</project>
<configuration>ram_0x1400_debug</configuration>
</member>
<member>
<project>hello_world</project>
<configuration>ram_0x1400_release</configuration>
</member>
<member>
<project>hello_world</project>
<configuration>release</configuration>
</member>
<member>
<project>hello_world</project>
<configuration>debug</configuration>
</member>
<member>
<project>hello_world</project>
<configuration>flexspi_nor_debug</configuration>
</member>
<member>
<project>hello_world</project>
<configuration>flexspi_nor_release</configuration>
</member>
</batchDefinition>
<batchDefinition>
<name>ram_0x1400_debug</name>
<member>
<project>hello_world</project>
<configuration>ram_0x1400_debug</configuration>
</member>
</batchDefinition>
<batchDefinition>
<name>ram_0x1400_release</name>
<member>
<project>hello_world</project>
<configuration>ram_0x1400_release</configuration>
</member>
</batchDefinition>
<batchDefinition>
<name>release</name>
<member>
<project>hello_world</project>
<configuration>release</configuration>
</member>
</batchDefinition>
<batchDefinition>
<name>debug</name>
<member>
<project>hello_world</project>
<configuration>debug</configuration>
</member>
</batchDefinition>
<batchDefinition>
<name>flexspi_nor_debug</name>
<member>
<project>hello_world</project>
<configuration>flexspi_nor_debug</configuration>
</member>
</batchDefinition>
<batchDefinition>
<name>flexspi_nor_release</name>
<member>
<project>hello_world</project>
<configuration>flexspi_nor_release</configuration>
</member>
</batchDefinition>
</batchBuild>
<project>
<path>$WS_DIR$/hello_world.ewp</path>
</project>
</workspace>

93
board/NXP_EVK_IMXRT1010/keil/hello_world/MIMXRT1011xxxxx_flexspi_nor.scf Normal file
View File

@@ -0,0 +1,93 @@
#! armcc -E
/*
** ###################################################################
** Processors: MIMXRT1011CAE4A
** MIMXRT1011DAE5A
**
** Compiler: Keil ARM C/C++ Compiler
** Reference manual: IMXRT1010RM Rev.A, 03/2019
** Version: rev. 0.1, 2019-02-14
** Build: b190723
**
** Abstract:
** Linker file for the Keil ARM C/C++ Compiler
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2019 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** ###################################################################
*/
#define m_flash_config_start 0x60000400
#define m_flash_config_size 0x00000C00
#define m_ivt_start 0x60001000
#define m_ivt_size 0x00001000
#define m_interrupts_start 0x60002000
#define m_interrupts_size 0x00000400
#define m_text_start 0x60002400
#define m_text_size 0x00FFDC00
#define m_data_start 0x20000000
#define m_data_size 0x00008000
#define m_data2_start 0x20200000
#define m_data2_size 0x00010000
/* Sizes */
#if (defined(__stack_size__))
#define Stack_Size __stack_size__
#else
#define Stack_Size 0x0400
#endif
#if (defined(__heap_size__))
#define Heap_Size __heap_size__
#else
#define Heap_Size 0x0400
#endif
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
LR_m_text m_flash_config_start m_text_start+m_text_size-m_flash_config_start { ; load region size_region
RW_m_config_text m_flash_config_start FIXED m_flash_config_size { ; load address = execution address
* (.boot_hdr.conf, +FIRST)
}
RW_m_ivt_text m_ivt_start FIXED m_ivt_size { ; load address = execution address
* (.boot_hdr.ivt, +FIRST)
* (.boot_hdr.boot_data)
* (.boot_hdr.dcd_data)
}
#else
LR_m_text m_interrupts_start m_text_start+m_text_size-m_interrupts_start { ; load region size_region
#endif
VECTOR_ROM m_interrupts_start FIXED m_interrupts_size { ; load address = execution address
* (RESET,+FIRST)
}
ER_m_text m_text_start FIXED m_text_size { ; load address = execution address
* (InRoot$$Sections)
.ANY (+RO)
}
RW_m_data m_data_start m_data_size-Stack_Size-Heap_Size { ; RW data
.ANY (+RW +ZI)
* (RamFunction)
* (NonCacheable.init)
* (NonCacheable)
}
ARM_LIB_HEAP +0 EMPTY Heap_Size { ; Heap region growing up
}
ARM_LIB_STACK m_data_start+m_data_size EMPTY -Stack_Size { ; Stack region growing down
}
RW_m_ncache m_data2_start EMPTY 0 {
}
RW_m_ncache_unused +0 EMPTY m_data2_size-ImageLength(RW_m_ncache) { ; Empty region added for MPU configuration
}
}

73
board/NXP_EVK_IMXRT1010/keil/hello_world/MIMXRT1011xxxxx_ram.scf Normal file
View File

@@ -0,0 +1,73 @@
#! armcc -E
/*
** ###################################################################
** Processors: MIMXRT1011CAE4A
** MIMXRT1011DAE5A
**
** Compiler: Keil ARM C/C++ Compiler
** Reference manual: IMXRT1010RM Rev.A, 03/2019
** Version: rev. 0.1, 2019-02-14
** Build: b190723
**
** Abstract:
** Linker file for the Keil ARM C/C++ Compiler
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2019 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** ###################################################################
*/
#define m_interrupts_start 0x00000000
#define m_interrupts_size 0x00000400
#define m_text_start 0x00000400
#define m_text_size 0x00007C00
#define m_data_start 0x20000000
#define m_data_size 0x00008000
#define m_data2_start 0x20200000
#define m_data2_size 0x00010000
/* Sizes */
#if (defined(__stack_size__))
#define Stack_Size __stack_size__
#else
#define Stack_Size 0x0400
#endif
#if (defined(__heap_size__))
#define Heap_Size __heap_size__
#else
#define Heap_Size 0x0400
#endif
LR_m_text m_interrupts_start m_text_start+m_text_size-m_interrupts_start { ; load region size_region
VECTOR_ROM m_interrupts_start FIXED m_interrupts_size { ; load address = execution address
* (RESET,+FIRST)
}
ER_m_text m_text_start FIXED m_text_size { ; load address = execution address
* (InRoot$$Sections)
.ANY (+RO)
}
RW_m_data m_data_start m_data_size-Stack_Size-Heap_Size { ; RW data
.ANY (+RW +ZI)
* (NonCacheable.init)
* (NonCacheable)
}
ARM_LIB_HEAP +0 EMPTY Heap_Size { ; Heap region growing up
}
ARM_LIB_STACK m_data_start+m_data_size EMPTY -Stack_Size { ; Stack region growing down
}
RW_m_ncache m_data2_start EMPTY 0 {
}
RW_m_ncache_unused +0 EMPTY m_data2_size-ImageLength(RW_m_ncache) { ; Empty region added for MPU configuration
}
}

44
board/NXP_EVK_IMXRT1010/keil/hello_world/evkmimxrt1010_flexspi_nor.ini Normal file
View File

@@ -0,0 +1,44 @@
/*
* Copyright 2019 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
FUNC void Setup (void) {
SP = _RDWORD(0x60002000); // Setup Stack Pointer
PC = _RDWORD(0x60002004); // Setup Program Counter
_WDWORD(0xE000ED08, 0x60002000); // Setup Vector Table Offset Register
}
FUNC void OnResetExec (void) { // executes upon software RESET
Setup(); // Setup for Running
}
LOAD %L INCREMENTAL // Download
Setup(); // Setup for Running
// g, main

44
board/NXP_EVK_IMXRT1010/keil/hello_world/evkmimxrt1010_ram.ini Normal file
View File

@@ -0,0 +1,44 @@
/*
* Copyright 2019 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
FUNC void Setup (void) {
SP = _RDWORD(0x00000000); // Setup Stack Pointer
PC = _RDWORD(0x00000004); // Setup Program Counter
_WDWORD(0xE000ED08, 0x00000000); // Setup Vector Table Offset Register
}
FUNC void OnResetExec (void) { // executes upon software RESET
Setup(); // Setup for Running
}
LOAD %L INCREMENTAL // Download
Setup(); // Setup for Running
// g, main

2132
board/NXP_EVK_IMXRT1010/keil/hello_world/hello_world.uvoptx Normal file
View File

File diff suppressed because it is too large Load Diff

3861
board/NXP_EVK_IMXRT1010/keil/hello_world/hello_world.uvprojx Normal file
View File

File diff suppressed because it is too large Load Diff

55
board/NXP_EVK_IMXRT1010/tos_config/tos_config.h Normal file
View File

@@ -0,0 +1,55 @@
#ifndef _TOS_CONFIG_H_
#define _TOS_CONFIG_H_
#include "board.h"
#define TOS_CFG_TASK_PRIO_MAX 10u
#define TOS_CFG_ROUND_ROBIN_EN 0u
#define TOS_CFG_OBJECT_VERIFY_EN 1u
#define TOS_CFG_TASK_DYNAMIC_CREATE_EN 1u
#define TOS_CFG_EVENT_EN 1u
#define TOS_CFG_MMBLK_EN 1u
#define TOS_CFG_MMHEAP_EN 1u
#define TOS_CFG_MMHEAP_DEFAULT_POOL_EN 1u
#define TOS_CFG_MMHEAP_DEFAULT_POOL_SIZE 0x1000
#define TOS_CFG_MUTEX_EN 1u
#define TOS_CFG_MESSAGE_QUEUE_EN 1u
#define TOS_CFG_MAIL_QUEUE_EN 1u
#define TOS_CFG_PRIORITY_MESSAGE_QUEUE_EN 1u
#define TOS_CFG_PRIORITY_MAIL_QUEUE_EN 1u
#define TOS_CFG_TIMER_EN 1u
#define TOS_CFG_PWR_MGR_EN 0u
#define TOS_CFG_TICKLESS_EN 0u
#define TOS_CFG_SEM_EN 1u
#define TOS_CFG_TASK_STACK_DRAUGHT_DEPTH_DETACT_EN 1u
#define TOS_CFG_FAULT_BACKTRACE_EN 0u
#define TOS_CFG_IDLE_TASK_STK_SIZE 128u
#define TOS_CFG_CPU_TICK_PER_SECOND 1000u
#define TOS_CFG_CPU_CLOCK (SystemCoreClock)
#define TOS_CFG_TIMER_AS_PROC 1u
#endif