Added the porting for i.MX RT1010 and i.MX RT1050

Signed-off-by: Howard Liu <howardliu7874@hotmail.com>
2020-01-15 14:58:06 +08:00
parent 88bfbe999a
commit 6f8edaa5c5
1572 changed files with 1491417 additions and 0 deletions
--- a/board/NXP_EVK_IMXRT1010/bsp/Src/pin_mux.c
+++ b/board/NXP_EVK_IMXRT1010/bsp/Src/pin_mux.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v6.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 0.0.4
+pin_labels:
+- {pin_num: '3', pin_signal: GPIO_09, label: LPUART1_RXD, identifier: UART1_RXD;BORD_UART1_RXD;BOARD_UART1_RXD;LPUART1_RXD}
+- {pin_num: '2', pin_signal: GPIO_10, label: LPUART1_TXD, identifier: UART1_TXD;LPUART1_TXD}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ * 
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ * 
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', prefix: BOARD_, coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09, identifier: LPUART1_RXD, slew_rate: Slow, software_input_on: Disable, open_drain: Disable,
+    speed: MHZ_150, drive_strength: R0_4, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
+  - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10, identifier: LPUART1_TXD, slew_rate: Slow, software_input_on: Disable, open_drain: Disable,
+    speed: MHZ_150, drive_strength: R0_4, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_09_LPUART1_RXD,             /* GPIO_09 is configured as LPUART1_RXD */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_10_LPUART1_TXD,             /* GPIO_10 is configured as LPUART1_TXD */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinConfig(
+      IOMUXC_GPIO_09_LPUART1_RXD,             /* GPIO_09 PAD functional properties : */
+      0x10A0U);                               /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: R0/4
+                                                 Speed Field: fast(150MHz)
+                                                 Open Drain Enable Field: Open Drain Disabled
+                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
+                                                 Pull / Keep Select Field: Keeper
+                                                 Pull Up / Down Config. Field: 100K Ohm Pull Down
+                                                 Hyst. Enable Field: Hysteresis Disabled */
+  IOMUXC_SetPinConfig(
+      IOMUXC_GPIO_10_LPUART1_TXD,             /* GPIO_10 PAD functional properties : */
+      0x10A0U);                               /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: R0/4
+                                                 Speed Field: fast(150MHz)
+                                                 Open Drain Enable Field: Open Drain Disabled
+                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
+                                                 Pull / Keep Select Field: Keeper
+                                                 Pull Up / Down Config. Field: 100K Ohm Pull Down
+                                                 Hyst. Enable Field: Hysteresis Disabled */
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/