Add NUCLEO_STM32L496ZG Keil And IAR Project

Signed-off-by: squallbest <squall@live0415.com>
2019-10-16 05:59:31 +08:00
parent 9cac7fa9bb
commit 881435a2a9
26 changed files with 7404 additions and 0 deletions
--- a/board/NUCLEO_STM32L496ZG/BSP/Src/usart.c
+++ b/board/NUCLEO_STM32L496ZG/BSP/Src/usart.c
@@ -0,0 +1,108 @@
+/**
+  ******************************************************************************
+  * File Name          : USART.c
+  * Description        : This file provides code for the configuration
+  *                      of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef hlpuart1;
+
+/* LPUART1 init function */
+
+void MX_LPUART1_UART_Init(void)
+{
+
+  hlpuart1.Instance = LPUART1;
+  hlpuart1.Init.BaudRate = 115200;
+  hlpuart1.Init.WordLength = UART_WORDLENGTH_8B;
+  hlpuart1.Init.StopBits = UART_STOPBITS_1;
+  hlpuart1.Init.Parity = UART_PARITY_NONE;
+  hlpuart1.Init.Mode = UART_MODE_TX_RX;
+  hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+  if (HAL_UART_Init(&hlpuart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(uartHandle->Instance==LPUART1)
+  {
+  /* USER CODE BEGIN LPUART1_MspInit 0 */
+
+  /* USER CODE END LPUART1_MspInit 0 */
+    /* LPUART1 clock enable */
+    __HAL_RCC_LPUART1_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOG_CLK_ENABLE();
+    HAL_PWREx_EnableVddIO2();
+    /**LPUART1 GPIO Configuration    
+    PG7     ------> LPUART1_TX
+    PG8     ------> LPUART1_RX 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
+    HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN LPUART1_MspInit 1 */
+
+  /* USER CODE END LPUART1_MspInit 1 */
+  }
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
+{
+
+  if(uartHandle->Instance==LPUART1)
+  {
+  /* USER CODE BEGIN LPUART1_MspDeInit 0 */
+
+  /* USER CODE END LPUART1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_LPUART1_CLK_DISABLE();
+  
+    /**LPUART1 GPIO Configuration    
+    PG7     ------> LPUART1_TX
+    PG8     ------> LPUART1_RX 
+    */
+    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_7|GPIO_PIN_8);
+
+  /* USER CODE BEGIN LPUART1_MspDeInit 1 */
+
+  /* USER CODE END LPUART1_MspDeInit 1 */
+  }
+} 
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/