add stm32h750 iot explorer examples

2021-04-25 16:38:56 +08:00
parent 7fbfc662e3
commit 89f53ad026
262 changed files with 27896 additions and 12948 deletions
--- a/board/TencentOS_tiny_STM32H750/BSP/Src/i2s.c
+++ b/board/TencentOS_tiny_STM32H750/BSP/Src/i2s.c
@@ -0,0 +1,150 @@
+/**
+  ******************************************************************************
+  * @file    i2s.c
+  * @brief   This file provides code for the configuration
+  *          of the I2S instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "i2s.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+I2S_HandleTypeDef hi2s2;
+
+/* I2S2 init function */
+void MX_I2S2_Init(void)
+{
+
+  /* USER CODE BEGIN I2S2_Init 0 */
+
+  /* USER CODE END I2S2_Init 0 */
+
+  /* USER CODE BEGIN I2S2_Init 1 */
+
+  /* USER CODE END I2S2_Init 1 */
+  hi2s2.Instance = SPI2;
+  hi2s2.Init.Mode = I2S_MODE_MASTER_TX;
+  hi2s2.Init.Standard = I2S_STANDARD_PHILIPS;
+  hi2s2.Init.DataFormat = I2S_DATAFORMAT_16B;
+  hi2s2.Init.MCLKOutput = I2S_MCLKOUTPUT_DISABLE;
+  hi2s2.Init.AudioFreq = I2S_AUDIOFREQ_8K;
+  hi2s2.Init.CPOL = I2S_CPOL_LOW;
+  hi2s2.Init.FirstBit = I2S_FIRSTBIT_MSB;
+  hi2s2.Init.WSInversion = I2S_WS_INVERSION_DISABLE;
+  hi2s2.Init.Data24BitAlignment = I2S_DATA_24BIT_ALIGNMENT_RIGHT;
+  hi2s2.Init.MasterKeepIOState = I2S_MASTER_KEEP_IO_STATE_DISABLE;
+  if (HAL_I2S_Init(&hi2s2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN I2S2_Init 2 */
+
+  /* USER CODE END I2S2_Init 2 */
+
+}
+
+void HAL_I2S_MspInit(I2S_HandleTypeDef* i2sHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+  if(i2sHandle->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspInit 0 */
+
+  /* USER CODE END SPI2_MspInit 0 */
+  /** Initializes the peripherals clock
+  */
+    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SPI2;
+    PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    /* I2S2 clock enable */
+    __HAL_RCC_SPI2_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    __HAL_RCC_GPIOI_CLK_ENABLE();
+    /**I2S2 GPIO Configuration
+    PB4 (NJTRST)     ------> I2S2_WS
+    PD3     ------> I2S2_CK
+    PI3     ------> I2S2_SDO
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_4;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF7_SPI2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+    HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI2_MspInit 1 */
+
+  /* USER CODE END SPI2_MspInit 1 */
+  }
+}
+
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef* i2sHandle)
+{
+
+  if(i2sHandle->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspDeInit 0 */
+
+  /* USER CODE END SPI2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI2_CLK_DISABLE();
+
+    /**I2S2 GPIO Configuration
+    PB4 (NJTRST)     ------> I2S2_WS
+    PD3     ------> I2S2_CK
+    PI3     ------> I2S2_SDO
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_4);
+
+    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_3);
+
+    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_3);
+
+  /* USER CODE BEGIN SPI2_MspDeInit 1 */
+
+  /* USER CODE END SPI2_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/