diff --git a/board/NUCLEO_STM32L432KC/BSP/Inc/gpio.h b/board/NUCLEO_STM32L432KC/BSP/Inc/gpio.h new file mode 100644 index 00000000..40490539 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Inc/gpio.h @@ -0,0 +1,57 @@ +/** + ****************************************************************************** + * File Name : gpio.h + * Description : This file contains all the functions prototypes for + * the gpio + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __gpio_H +#define __gpio_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_GPIO_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__ pinoutConfig_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Inc/main.h b/board/NUCLEO_STM32L432KC/BSP/Inc/main.h new file mode 100644 index 00000000..025ae9e2 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Inc/main.h @@ -0,0 +1,73 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define LED_Pin GPIO_PIN_3 +#define LED_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Inc/mcu_init.h b/board/NUCLEO_STM32L432KC/BSP/Inc/mcu_init.h new file mode 100644 index 00000000..5c1cc892 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Inc/mcu_init.h @@ -0,0 +1,19 @@ +#ifndef __MCU_INIT_H +#define __MCU_INIT_H +#ifdef __cplusplus + extern "C" { +#endif + +#include "main.h" +#include "stm32l4xx_hal.h" +#include "usart.h" +#include "gpio.h" +#include "tos.h" + +void board_init(void); +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif +#endif /*__ __MCU_INIT_H */ diff --git a/board/NUCLEO_STM32L432KC/BSP/Inc/stm32l4xx_hal_conf.h b/board/NUCLEO_STM32L432KC/BSP/Inc/stm32l4xx_hal_conf.h new file mode 100644 index 00000000..046586ef --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Inc/stm32l4xx_hal_conf.h @@ -0,0 +1,440 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2019 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_CONF_H +#define __STM32L4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/*#define HAL_DFSDM_MODULE_ENABLED */ +/*#define HAL_DSI_MODULE_ENABLED */ +/*#define HAL_FIREWALL_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_HCD_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_OPAMP_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_SWPMI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/** + * @brief External clock source for SAI2 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) + #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000U) /*!< Value of the SAI2 External clock source in Hz*/ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l4xx_hal_rcc.h" + #include "stm32l4xx_hal_rcc_ex.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32l4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l4xx_hal_dma.h" + #include "stm32l4xx_hal_dma_ex.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32l4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32l4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32l4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32l4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32l4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l4xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32l4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32l4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32l4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l4xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32l4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32l4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32l4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32l4xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32l4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32l4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32l4xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l4xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32l4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32l4xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(char *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Inc/stm32l4xx_it.h b/board/NUCLEO_STM32L432KC/BSP/Inc/stm32l4xx_it.h new file mode 100644 index 00000000..54934911 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Inc/stm32l4xx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_IT_H +#define __STM32L4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Inc/usart.h b/board/NUCLEO_STM32L432KC/BSP/Inc/usart.h new file mode 100644 index 00000000..6d0a9c58 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Inc/usart.h @@ -0,0 +1,58 @@ +/** + ****************************************************************************** + * File Name : USART.h + * Description : This file provides code for the configuration + * of the USART instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __usart_H +#define __usart_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern UART_HandleTypeDef huart2; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_USART2_UART_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__ usart_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/gpio.c b/board/NUCLEO_STM32L432KC/BSP/Src/gpio.c new file mode 100644 index 00000000..caea18d3 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/gpio.c @@ -0,0 +1,66 @@ +/** + ****************************************************************************** + * File Name : gpio.c + * Description : This file provides code for the configuration + * of all used GPIO pins. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "gpio.h" +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/*----------------------------------------------------------------------------*/ +/* Configure GPIO */ +/*----------------------------------------------------------------------------*/ +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/** Configure pins as + * Analog + * Input + * Output + * EVENT_OUT + * EXTI +*/ +void MX_GPIO_Init(void) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : PtPin */ + GPIO_InitStruct.Pin = LED_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 2 */ + +/* USER CODE END 2 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/main.c b/board/NUCLEO_STM32L432KC/BSP/Src/main.c new file mode 100644 index 00000000..b27491b9 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/main.c @@ -0,0 +1,23 @@ +#include "mcu_init.h" +#include "cmsis_os.h" + +#define APPLICATION_TASK_STK_SIZE 1024 +extern void application_entry(void *arg); +osThreadDef(application_entry, osPriorityNormal, 1, APPLICATION_TASK_STK_SIZE); + +__weak void application_entry(void *arg) +{ + while (1) { + printf("This is a demo task,please use your task entry!\r\n"); + tos_task_delay(1000); + } +} + +int main(void) +{ + board_init(); + printf("Welcome to TencentOS tiny NUCLEO_STM32L432KC IAR Project\r\n"); + osKernelInitialize(); + osThreadCreate(osThread(application_entry), NULL); + osKernelStart(); +} diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/mcu_init.c b/board/NUCLEO_STM32L432KC/BSP/Src/mcu_init.c new file mode 100644 index 00000000..3ff3aa6a --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/mcu_init.c @@ -0,0 +1,125 @@ +#include "mcu_init.h" + +int fputc(int ch, FILE *f) +{ + if (ch == '\n') { + HAL_UART_Transmit(&huart2, (void *)"\r", 1,30000); + } + HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, 0xFFFF); + return ch; +} + +int _write(int fd, char *ptr, int len) +{ + (void)HAL_UART_Transmit(&huart2, (uint8_t *)ptr, len, 0xFFFF); + return len; +} + +int fgetc(FILE *f) +{ + /* Place your implementation of fgetc here */ + /* e.g. readwrite a character to the USART2 and Loop until the end of transmission */ + uint8_t ch = 0; + //uint32_t recv_size; + HAL_UART_Receive(&huart2, &ch, 1,30000); + return ch; +} + + +void board_init(void) +{ + + HAL_Init(); + SystemClock_Config(); + MX_GPIO_Init(); + MX_USART2_UART_Init(); + +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 8; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + /** Configure the main internal regulator output voltage + */ + if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) + { + Error_Handler(); + } +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/stm32l4xx_hal_msp.c b/board/NUCLEO_STM32L432KC/BSP/Src/stm32l4xx_hal_msp.c new file mode 100644 index 00000000..568eaf02 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/stm32l4xx_hal_msp.c @@ -0,0 +1,84 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * File Name : stm32l4xx_hal_msp.c + * Description : This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/stm32l4xx_it.c b/board/NUCLEO_STM32L432KC/BSP/Src/stm32l4xx_it.c new file mode 100644 index 00000000..a08c7de5 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/stm32l4xx_it.c @@ -0,0 +1,210 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32l4xx_it.h" +#include "tos.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +__weak void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + if(tos_knl_is_running()) + { + tos_knl_irq_enter(); + tos_tick_handler(); + tos_knl_irq_leave(); + } + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32L4xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32l4xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/system_stm32l4xx.c b/board/NUCLEO_STM32L432KC/BSP/Src/system_stm32l4xx.c new file mode 100644 index 00000000..26bd5179 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/system_stm32l4xx.c @@ -0,0 +1,337 @@ +/** + ****************************************************************************** + * @file system_stm32l4xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the MSI (4 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | MSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 8 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * PLLSAI1_P | NA + *----------------------------------------------------------------------------- + * PLLSAI1_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI1_R | NA + *----------------------------------------------------------------------------- + * PLLSAI2_P | NA + *----------------------------------------------------------------------------- + * PLLSAI2_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI2_R | NA + *----------------------------------------------------------------------------- + * Require 48MHz for USB OTG FS, | Disabled + * SDIO and RNG clock | + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx_system + * @{ + */ + +/** @addtogroup STM32L4xx_System_Private_Includes + * @{ + */ + +#include "stm32l4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (MSI_VALUE) + #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 4000000U; + + const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U}; + const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U}; + const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \ + 4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U}; +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ + +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set MSION bit */ + RCC->CR |= RCC_CR_MSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000U; + + /* Reset HSEON, CSSON , HSION, and PLLON bits */ + RCC->CR &= 0xEAF6FFFFU; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x00001000U; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000U; + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U; + + /* Get MSI Range frequency--------------------------------------------------*/ + if((RCC->CR & RCC_CR_MSIRGSEL) == RESET) + { /* MSISRANGE from RCC_CSR applies */ + msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* MSI used as system clock source */ + SystemCoreClock = msirange; + break; + + case 0x04: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ; + + switch (pllsource) + { + case 0x02: /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm); + break; + + case 0x03: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm); + break; + + default: /* MSI used as PLL clock source */ + pllvco = (msirange / pllm); + break; + } + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U; + SystemCoreClock = pllvco/pllr; + break; + + default: + SystemCoreClock = msirange; + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/Src/usart.c b/board/NUCLEO_STM32L432KC/BSP/Src/usart.c new file mode 100644 index 00000000..26dd3342 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/Src/usart.c @@ -0,0 +1,108 @@ +/** + ****************************************************************************** + * File Name : USART.c + * Description : This file provides code for the configuration + * of the USART instances. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usart.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +UART_HandleTypeDef huart2; + +/* USART2 init function */ + +void MX_USART2_UART_Init(void) +{ + + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart2) != HAL_OK) + { + Error_Handler(); + } + +} + +void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(uartHandle->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspInit 0 */ + + /* USER CODE END USART2_MspInit 0 */ + /* USART2 clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART2_MspInit 1 */ + + /* USER CODE END USART2_MspInit 1 */ + } +} + +void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle) +{ + + if(uartHandle->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspDeInit 0 */ + + /* USER CODE END USART2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); + + /* USER CODE BEGIN USART2_MspDeInit 1 */ + + /* USER CODE END USART2_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/BSP/TencentOS_tiny.ioc b/board/NUCLEO_STM32L432KC/BSP/TencentOS_tiny.ioc new file mode 100644 index 00000000..98c1a7d1 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/BSP/TencentOS_tiny.ioc @@ -0,0 +1,128 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +KeepUserPlacement=false +Mcu.Family=STM32L4 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IP3=USART2 +Mcu.IPNb=4 +Mcu.Name=STM32L432K(B-C)Ux +Mcu.Package=UFQFPN32 +Mcu.Pin0=PC14-OSC32_IN (PC14) +Mcu.Pin1=PC15-OSC32_OUT (PC15) +Mcu.Pin2=PA2 +Mcu.Pin3=PA3 +Mcu.Pin4=PB3 (JTDO-TRACESWO) +Mcu.Pin5=VP_SYS_VS_Systick +Mcu.PinsNb=6 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32L432KCUx +MxCube.Version=5.3.0 +MxDb.Version=DB.5.0.30 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PA2.Mode=Asynchronous +PA2.Signal=USART2_TX +PA3.Mode=Asynchronous +PA3.Signal=USART2_RX +PB3\ (JTDO-TRACESWO).GPIOParameters=GPIO_Label +PB3\ (JTDO-TRACESWO).GPIO_Label=LED +PB3\ (JTDO-TRACESWO).Locked=true +PB3\ (JTDO-TRACESWO).Signal=GPIO_Output +PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator +PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN +PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator +PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT +PCC.Checker=true +PCC.Line=STM32L4x2 +PCC.MCU=STM32L432K(B-C)Ux +PCC.PartNumber=STM32L432KCUx +PCC.Seq0=0 +PCC.Series=STM32L4 +PCC.Temperature=25 +PCC.Vdd=3.0 +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=true +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32L432KCUx +ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.14.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=TencentOS_tiny.ioc +ProjectManager.ProjectName=TencentOS_tiny +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5 +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true +RCC.ADCFreq_Value=64000000 +RCC.AHBFreq_Value=64000000 +RCC.APB1Freq_Value=64000000 +RCC.APB1TimFreq_Value=64000000 +RCC.APB2Freq_Value=64000000 +RCC.APB2TimFreq_Value=64000000 +RCC.CortexFreq_Value=64000000 +RCC.FCLKCortexFreq_Value=64000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=64000000 +RCC.HSE_VALUE=8000000 +RCC.HSI48_VALUE=48000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=64000000 +RCC.I2C3Freq_Value=64000000 +RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USART2Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value +RCC.LPTIM1Freq_Value=64000000 +RCC.LPTIM2Freq_Value=64000000 +RCC.LPUART1Freq_Value=64000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=64000000 +RCC.MSI_VALUE=4000000 +RCC.PLLPoutputFreq_Value=18285714.285714287 +RCC.PLLQoutputFreq_Value=64000000 +RCC.PLLRCLKFreq_Value=64000000 +RCC.PLLSAI1PoutputFreq_Value=18285714.285714287 +RCC.PLLSAI1QoutputFreq_Value=64000000 +RCC.PLLSAI1RoutputFreq_Value=64000000 +RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI +RCC.PWRFreq_Value=64000000 +RCC.RNGFreq_Value=64000000 +RCC.SAI1Freq_Value=18285714.285714287 +RCC.SWPMI1Freq_Value=64000000 +RCC.SYSCLKFreq_VALUE=64000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.USART1Freq_Value=64000000 +RCC.USART2Freq_Value=64000000 +RCC.USBFreq_Value=64000000 +RCC.VCOInputFreq_Value=16000000 +RCC.VCOOutputFreq_Value=128000000 +RCC.VCOSAI1OutputFreq_Value=128000000 +USART2.IPParameters=VirtualMode-Asynchronous +USART2.VirtualMode-Asynchronous=VM_ASYNC +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/board/NUCLEO_STM32L432KC/IAR/hello_world/Project.eww b/board/NUCLEO_STM32L432KC/IAR/hello_world/Project.eww new file mode 100644 index 00000000..b7a8dea4 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/IAR/hello_world/Project.eww @@ -0,0 +1,7 @@ + + + + $WS_DIR$\TencentOS_tiny.ewp + + + diff --git a/board/NUCLEO_STM32L432KC/IAR/hello_world/TencentOS_tiny.ewd b/board/NUCLEO_STM32L432KC/IAR/hello_world/TencentOS_tiny.ewd new file mode 100644 index 00000000..963f3641 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/IAR/hello_world/TencentOS_tiny.ewd @@ -0,0 +1,1419 @@ + + + 3 + + TencentOS_tiny + + ARM + + 1 + + C-SPY + 2 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 1 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 1 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + diff --git a/board/NUCLEO_STM32L432KC/IAR/hello_world/TencentOS_tiny.ewp b/board/NUCLEO_STM32L432KC/IAR/hello_world/TencentOS_tiny.ewp new file mode 100644 index 00000000..7902a26c --- /dev/null +++ b/board/NUCLEO_STM32L432KC/IAR/hello_world/TencentOS_tiny.ewp @@ -0,0 +1,1234 @@ + + + 3 + + TencentOS_tiny + + ARM + + 1 + + General + 3 + + 31 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Application + + EWARM + + $PROJ_DIR$\startup_stm32l432xx.s + + + + examples + + $PROJ_DIR$\..\..\..\..\examples\hello_world\hello_world.c + + + + User + + $PROJ_DIR$\..\..\BSP\Src\gpio.c + + + $PROJ_DIR$\..\..\BSP\Src\main.c + + + $PROJ_DIR$\..\..\BSP\Src\mcu_init.c + + + $PROJ_DIR$\..\..\BSP\Src\stm32l4xx_hal_msp.c + + + $PROJ_DIR$\..\..\BSP\Src\stm32l4xx_it.c + + + $PROJ_DIR$\..\..\BSP\Src\usart.c + + + + + Drivers + + CMSIS + + $PROJ_DIR$\..\..\BSP\Src\system_stm32l4xx.c + + + + STM32L4xx_HAL_Driver + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + + + $PROJ_DIR$\..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + + + + + tos/arch + + $PROJ_DIR$\..\..\..\..\arch\arm\arm-v7m\cortex-m4\iccarm\port_c.c + + + $PROJ_DIR$\..\..\..\..\arch\arm\arm-v7m\cortex-m4\iccarm\port_s.S + + + $PROJ_DIR$\..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c + + + + tos/cmsis-os + + $PROJ_DIR$\..\..\..\..\osal\cmsis_os\cmsis_os.c + + + + tos/kernel + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_completion.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_countdownlatch.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_event.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_fifo.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_global.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_mmblk.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_mmheap.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_msg.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_mutex.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_pend.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_queue.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_robin.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_sched.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_sem.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_sys.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_task.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_tick.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_time.c + + + $PROJ_DIR$\..\..\..\..\kernel\core\tos_timer.c + + + diff --git a/board/NUCLEO_STM32L432KC/IAR/hello_world/startup_stm32l432xx.s b/board/NUCLEO_STM32L432KC/IAR/hello_world/startup_stm32l432xx.s new file mode 100644 index 00000000..381ffae0 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/IAR/hello_world/startup_stm32l432xx.s @@ -0,0 +1,517 @@ +;******************************************************************************** +;* File Name : startup_stm32l432xx.s +;* Author : MCD Application Team +;* Description : STM32L432xx Ultra Low Power Devices vector +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;*

© Copyright (c) 2017 STMicroelectronics. +;* All rights reserved.

+;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD COMP_IRQHandler ; COMP Interrupt + DCD LPTIM1_IRQHandler ; LP TIM1 interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 interrupt + DCD USB_IRQHandler ; USB FS + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 + DCD LPUART1_IRQHandler ; LP UART 1 interrupt + DCD QUADSPI_IRQHandler ; Quad SPI global interrupt + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt + DCD 0 ; Reserved + DCD SWPMI1_IRQHandler ; Serial Wire Interface global interrupt + DCD TSC_IRQHandler ; Touch Sense Controller global interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG global interrupt + DCD FPU_IRQHandler ; FPU interrupt + DCD CRS_IRQHandler ; CRS interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_IRQHandler + B TAMP_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_SCE_IRQHandler + B CAN1_SCE_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_TIM15_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_TIM15_IRQHandler + B TIM1_BRK_TIM15_IRQHandler + + PUBWEAK TIM1_UP_TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM16_IRQHandler + B TIM1_UP_TIM16_IRQHandler + + PUBWEAK TIM1_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_IRQHandler + B TIM1_TRG_COM_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK DMA2_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel1_IRQHandler + B DMA2_Channel1_IRQHandler + + PUBWEAK DMA2_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel2_IRQHandler + B DMA2_Channel2_IRQHandler + + PUBWEAK DMA2_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel3_IRQHandler + B DMA2_Channel3_IRQHandler + + PUBWEAK DMA2_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel4_IRQHandler + B DMA2_Channel4_IRQHandler + + PUBWEAK DMA2_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel5_IRQHandler + B DMA2_Channel5_IRQHandler + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +COMP_IRQHandler + B COMP_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK USB_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_IRQHandler + B USB_IRQHandler + + PUBWEAK DMA2_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel6_IRQHandler + B DMA2_Channel6_IRQHandler + + PUBWEAK DMA2_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel7_IRQHandler + B DMA2_Channel7_IRQHandler + + PUBWEAK LPUART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPUART1_IRQHandler + B LPUART1_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK SAI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI1_IRQHandler + B SAI1_IRQHandler + + PUBWEAK SWPMI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SWPMI1_IRQHandler + B SWPMI1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK CRS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CRS_IRQHandler + B CRS_IRQHandler + + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/board/NUCLEO_STM32L432KC/IAR/hello_world/stm32l432xx_flash.icf b/board/NUCLEO_STM32L432KC/IAR/hello_world/stm32l432xx_flash.icf new file mode 100644 index 00000000..43accca2 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/IAR/hello_world/stm32l432xx_flash.icf @@ -0,0 +1,41 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + +define symbol __region_SRAM1_start__ = 0x20000000; +define symbol __region_SRAM1_end__ = 0x2000BFFF; +define symbol __region_SRAM2_start__ = 0x2000C000; +define symbol __region_SRAM2_end__ = 0x2000FFFF; + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region SRAM1_region = mem:[from __region_SRAM1_start__ to __region_SRAM1_end__]; +define region SRAM2_region = mem:[from __region_SRAM2_start__ to __region_SRAM2_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; +place in SRAM1_region { }; +place in SRAM2_region { }; + diff --git a/board/NUCLEO_STM32L432KC/IAR/hello_world/stm32l432xx_sram.icf b/board/NUCLEO_STM32L432KC/IAR/hello_world/stm32l432xx_sram.icf new file mode 100644 index 00000000..16280b4e --- /dev/null +++ b/board/NUCLEO_STM32L432KC/IAR/hello_world/stm32l432xx_sram.icf @@ -0,0 +1,40 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x20000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x20000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x20007FFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20008000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2000BFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + +define symbol __region_SRAM1_start__ = 0x20008000; +define symbol __region_SRAM1_end__ = 0x2000BFFF; +define symbol __region_SRAM2_start__ = 0x2000C000; +define symbol __region_SRAM2_end__ = 0x2000FFFF; + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region SRAM1_region = mem:[from __region_SRAM1_start__ to __region_SRAM1_end__]; +define region SRAM2_region = mem:[from __region_SRAM2_start__ to __region_SRAM2_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; +place in SRAM1_region { }; +place in SRAM2_region { }; diff --git a/board/NUCLEO_STM32L432KC/KEIL/hello_world/TencentOS_tiny.uvoptx b/board/NUCLEO_STM32L432KC/KEIL/hello_world/TencentOS_tiny.uvoptx new file mode 100644 index 00000000..417ee97e --- /dev/null +++ b/board/NUCLEO_STM32L432KC/KEIL/hello_world/TencentOS_tiny.uvoptx @@ -0,0 +1,888 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + TencentOS_tiny + 0x4 + ARM-ADS + + 64000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + ARMRTXEVENTFLAGS + -L70 -Z18 -C0 -M0 -T1 + + + 0 + DLGTARM + (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0) + + + 0 + ARMDBGFLAGS + + + + 0 + DLGUARM + (105=-1,-1,-1,-1,0) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32L432KCUx$CMSIS\Flash\STM32L4xx_256.FLM)) + + + 0 + ST-LINKIII-KEIL_SWO + -U-O142 -O2254 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_256.FLM -FS08000000 -FL040000 -FP0($$Device:STM32L432KCUx$CMSIS\Flash\STM32L4xx_256.FLM) + + + + + 0 + + + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Application/MDK-ARM + 0 + 0 + 0 + 0 + + 1 + 1 + 2 + 0 + 0 + 0 + .\startup_stm32l432xx.s + startup_stm32l432xx.s + 0 + 0 + + + + + Application/User + 1 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\gpio.c + gpio.c + 0 + 0 + + + 2 + 3 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\main.c + main.c + 0 + 0 + + + 2 + 4 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\stm32l4xx_hal_msp.c + stm32l4xx_hal_msp.c + 0 + 0 + + + 2 + 5 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\stm32l4xx_it.c + stm32l4xx_it.c + 0 + 0 + + + 2 + 6 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\usart.c + usart.c + 0 + 0 + + + 2 + 7 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\mcu_init.c + mcu_init.c + 0 + 0 + + + + + Drivers/STM32L4xx_HAL_Driver + 0 + 0 + 0 + 0 + + 3 + 8 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + stm32l4xx_hal.c + 0 + 0 + + + 3 + 9 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + stm32l4xx_hal_cortex.c + 0 + 0 + + + 3 + 10 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + stm32l4xx_hal_dma.c + 0 + 0 + + + 3 + 11 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + stm32l4xx_hal_dma_ex.c + 0 + 0 + + + 3 + 12 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + stm32l4xx_hal_exti.c + 0 + 0 + + + 3 + 13 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c + stm32l4xx_hal_flash.c + 0 + 0 + + + 3 + 14 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + stm32l4xx_hal_flash_ex.c + 0 + 0 + + + 3 + 15 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c + stm32l4xx_hal_flash_ramfunc.c + 0 + 0 + + + 3 + 16 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + stm32l4xx_hal_gpio.c + 0 + 0 + + + 3 + 17 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c + stm32l4xx_hal_i2c.c + 0 + 0 + + + 3 + 18 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + stm32l4xx_hal_i2c_ex.c + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + stm32l4xx_hal_pwr.c + 0 + 0 + + + 3 + 20 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + stm32l4xx_hal_pwr_ex.c + 0 + 0 + + + 3 + 21 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + stm32l4xx_hal_rcc.c + 0 + 0 + + + 3 + 22 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + stm32l4xx_hal_rcc_ex.c + 0 + 0 + + + 3 + 23 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + stm32l4xx_hal_tim.c + 0 + 0 + + + 3 + 24 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c + stm32l4xx_hal_tim_ex.c + 0 + 0 + + + 3 + 25 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + stm32l4xx_hal_uart.c + 0 + 0 + + + 3 + 26 + 1 + 0 + 0 + 0 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + stm32l4xx_hal_uart_ex.c + 0 + 0 + + + + + Drivers/CMSIS + 0 + 0 + 0 + 0 + + 4 + 27 + 1 + 0 + 0 + 0 + ..\..\BSP\Src\system_stm32l4xx.c + system_stm32l4xx.c + 0 + 0 + + + + + tos/arch + 0 + 0 + 0 + 0 + + 5 + 28 + 1 + 0 + 0 + 0 + ..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c + tos_cpu.c + 0 + 0 + + + 5 + 29 + 1 + 0 + 0 + 0 + ..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_c.c + port_c.c + 0 + 0 + + + 5 + 30 + 2 + 0 + 0 + 0 + ..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_s.S + port_s.S + 0 + 0 + + + + + tos/kernel + 0 + 0 + 0 + 0 + + 6 + 31 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_completion.c + tos_completion.c + 0 + 0 + + + 6 + 32 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_countdownlatch.c + tos_countdownlatch.c + 0 + 0 + + + 6 + 33 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_event.c + tos_event.c + 0 + 0 + + + 6 + 34 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_fifo.c + tos_fifo.c + 0 + 0 + + + 6 + 35 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_global.c + tos_global.c + 0 + 0 + + + 6 + 36 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_mmblk.c + tos_mmblk.c + 0 + 0 + + + 6 + 37 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_mmheap.c + tos_mmheap.c + 0 + 0 + + + 6 + 38 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_msg.c + tos_msg.c + 0 + 0 + + + 6 + 39 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_mutex.c + tos_mutex.c + 0 + 0 + + + 6 + 40 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_pend.c + tos_pend.c + 0 + 0 + + + 6 + 41 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_queue.c + tos_queue.c + 0 + 0 + + + 6 + 42 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_robin.c + tos_robin.c + 0 + 0 + + + 6 + 43 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_sched.c + tos_sched.c + 0 + 0 + + + 6 + 44 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_sem.c + tos_sem.c + 0 + 0 + + + 6 + 45 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_sys.c + tos_sys.c + 0 + 0 + + + 6 + 46 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_task.c + tos_task.c + 0 + 0 + + + 6 + 47 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_tick.c + tos_tick.c + 0 + 0 + + + 6 + 48 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_time.c + tos_time.c + 0 + 0 + + + 6 + 49 + 1 + 0 + 0 + 0 + ..\..\..\..\kernel\core\tos_timer.c + tos_timer.c + 0 + 0 + + + + + tos/cmsis_os + 0 + 0 + 0 + 0 + + 7 + 50 + 1 + 0 + 0 + 0 + ..\..\..\..\osal\cmsis_os\cmsis_os.c + cmsis_os.c + 0 + 0 + + + + + examples + 1 + 0 + 0 + 0 + + 8 + 51 + 1 + 0 + 0 + 0 + ..\..\..\..\examples\hello_world\hello_world.c + hello_world.c + 0 + 0 + + + + + ::CMSIS + 0 + 0 + 0 + 1 + + + diff --git a/board/NUCLEO_STM32L432KC/KEIL/hello_world/TencentOS_tiny.uvprojx b/board/NUCLEO_STM32L432KC/KEIL/hello_world/TencentOS_tiny.uvprojx new file mode 100644 index 00000000..3525e8d1 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/KEIL/hello_world/TencentOS_tiny.uvprojx @@ -0,0 +1,697 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + TencentOS_tiny + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32L432KCUx + STMicroelectronics + Keil.STM32L4xx_DFP.2.2.0 + http://www.keil.com/pack + IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x803FFFF) CLOCK(8000000) FPU2 CPUTYPE("Cortex-M4") + + + + + + + + + + + + + + + $$Device:STM32L432KCUx$CMSIS\SVD\STM32L4x2.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + TencentOS_tiny\ + TencentOS_tiny + 1 + 0 + 1 + 1 + 1 + + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 0 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4107 + + 1 + STLink\ST-LINKIII-KEIL_SWO.dll + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 1 + 0x8000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + USE_HAL_DRIVER,STM32L432xx,USE_HAL_DRIVER,STM32L432xx + + ..\..\BSP\Inc;..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Inc;..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Inc\Legacy;..\..\..\..\platform\vendor_bsp\st\CMSIS\Device\ST\STM32L4xx\Include;..\..\..\..\platform\vendor_bsp\st\CMSIS\Include;..\..\..\..\arch\arm\arm-v7m\common\include;..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc;..\..\..\..\kernel\core\include;..\..\..\..\kernel\pm\include;..\..\..\..\osal\cmsis_os;..\..\..\..\examples\hello_world;..\..\TOS_CONFIG + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + Application/MDK-ARM + + + startup_stm32l432xx.s + 2 + .\startup_stm32l432xx.s + + + + + Application/User + + + gpio.c + 1 + ..\..\BSP\Src\gpio.c + + + main.c + 1 + ..\..\BSP\Src\main.c + + + stm32l4xx_hal_msp.c + 1 + ..\..\BSP\Src\stm32l4xx_hal_msp.c + + + stm32l4xx_it.c + 1 + ..\..\BSP\Src\stm32l4xx_it.c + + + usart.c + 1 + ..\..\BSP\Src\usart.c + + + mcu_init.c + 1 + ..\..\BSP\Src\mcu_init.c + + + + + Drivers/STM32L4xx_HAL_Driver + + + stm32l4xx_hal.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c + + + stm32l4xx_hal_cortex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c + + + stm32l4xx_hal_dma.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c + + + stm32l4xx_hal_dma_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c + + + stm32l4xx_hal_exti.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c + + + stm32l4xx_hal_flash.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c + + + stm32l4xx_hal_flash_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c + + + stm32l4xx_hal_flash_ramfunc.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c + + + stm32l4xx_hal_gpio.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c + + + stm32l4xx_hal_i2c.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c + + + stm32l4xx_hal_i2c_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c + + + stm32l4xx_hal_pwr.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c + + + stm32l4xx_hal_pwr_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c + + + stm32l4xx_hal_rcc.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c + + + stm32l4xx_hal_rcc_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c + + + stm32l4xx_hal_tim.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c + + + stm32l4xx_hal_tim_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c + + + stm32l4xx_hal_uart.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c + + + stm32l4xx_hal_uart_ex.c + 1 + ..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c + + + + + Drivers/CMSIS + + + system_stm32l4xx.c + 1 + ..\..\BSP\Src\system_stm32l4xx.c + + + + + tos/arch + + + tos_cpu.c + 1 + ..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c + + + port_c.c + 1 + ..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_c.c + + + port_s.S + 2 + ..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_s.S + + + + + tos/kernel + + + tos_completion.c + 1 + ..\..\..\..\kernel\core\tos_completion.c + + + tos_countdownlatch.c + 1 + ..\..\..\..\kernel\core\tos_countdownlatch.c + + + tos_event.c + 1 + ..\..\..\..\kernel\core\tos_event.c + + + tos_fifo.c + 1 + ..\..\..\..\kernel\core\tos_fifo.c + + + tos_global.c + 1 + ..\..\..\..\kernel\core\tos_global.c + + + tos_mmblk.c + 1 + ..\..\..\..\kernel\core\tos_mmblk.c + + + tos_mmheap.c + 1 + ..\..\..\..\kernel\core\tos_mmheap.c + + + tos_msg.c + 1 + ..\..\..\..\kernel\core\tos_msg.c + + + tos_mutex.c + 1 + ..\..\..\..\kernel\core\tos_mutex.c + + + tos_pend.c + 1 + ..\..\..\..\kernel\core\tos_pend.c + + + tos_queue.c + 1 + ..\..\..\..\kernel\core\tos_queue.c + + + tos_robin.c + 1 + ..\..\..\..\kernel\core\tos_robin.c + + + tos_sched.c + 1 + ..\..\..\..\kernel\core\tos_sched.c + + + tos_sem.c + 1 + ..\..\..\..\kernel\core\tos_sem.c + + + tos_sys.c + 1 + ..\..\..\..\kernel\core\tos_sys.c + + + tos_task.c + 1 + ..\..\..\..\kernel\core\tos_task.c + + + tos_tick.c + 1 + ..\..\..\..\kernel\core\tos_tick.c + + + tos_time.c + 1 + ..\..\..\..\kernel\core\tos_time.c + + + tos_timer.c + 1 + ..\..\..\..\kernel\core\tos_timer.c + + + + + tos/cmsis_os + + + cmsis_os.c + 1 + ..\..\..\..\osal\cmsis_os\cmsis_os.c + + + + + examples + + + hello_world.c + 1 + ..\..\..\..\examples\hello_world\hello_world.c + + + + + ::CMSIS + + + + + + + + + + + + + + + + + + + diff --git a/board/NUCLEO_STM32L432KC/KEIL/hello_world/startup_stm32l432xx.s b/board/NUCLEO_STM32L432KC/KEIL/hello_world/startup_stm32l432xx.s new file mode 100644 index 00000000..c0eb8bd3 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/KEIL/hello_world/startup_stm32l432xx.s @@ -0,0 +1,382 @@ +;******************************************************************************* +;* File Name : startup_stm32l432xx.s +;* Author : MCD Application Team +;* Description : STM32L432xx Ultra Low Power devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +;* +;*

© Copyright (c) 2017 STMicroelectronics. +;* All rights reserved.

+;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD COMP_IRQHandler ; COMP Interrupt + DCD LPTIM1_IRQHandler ; LP TIM1 interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 interrupt + DCD USB_IRQHandler ; USB FS + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 + DCD LPUART1_IRQHandler ; LP UART1 interrupt + DCD QUADSPI_IRQHandler ; Quad SPI global interrupt + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt + DCD 0 ; Reserved + DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt + DCD TSC_IRQHandler ; Touch Sense Controller global interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD RNG_IRQHandler ; RNG global interrupt + DCD FPU_IRQHandler ; FPU + DCD CRS_IRQHandler ; CRS interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT USB_IRQHandler [WEAK] + EXPORT DMA2_Channel6_IRQHandler [WEAK] + EXPORT DMA2_Channel7_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT SWPMI1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT CRS_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +SPI3_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +COMP_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +USB_IRQHandler +DMA2_Channel6_IRQHandler +DMA2_Channel7_IRQHandler +LPUART1_IRQHandler +QUADSPI_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +SAI1_IRQHandler +SWPMI1_IRQHandler +TSC_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +CRS_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/board/NUCLEO_STM32L432KC/TOS_CONFIG/tos_config.h b/board/NUCLEO_STM32L432KC/TOS_CONFIG/tos_config.h new file mode 100644 index 00000000..59003da0 --- /dev/null +++ b/board/NUCLEO_STM32L432KC/TOS_CONFIG/tos_config.h @@ -0,0 +1,45 @@ +#ifndef _TOS_CONFIG_H_ +#define _TOS_CONFIG_H_ + +#include "stm32l4xx.h" + +#define TOS_CFG_TASK_PRIO_MAX 10u + +#define TOS_CFG_ROUND_ROBIN_EN 1u + +#define TOS_CFG_OBJECT_VERIFY_EN 0u + +#define TOS_CFG_EVENT_EN 1u + +#define TOS_CFG_MMBLK_EN 1u + +#define TOS_CFG_MMHEAP_EN 1u + +#define TOS_CFG_MMHEAP_POOL_SIZE 0x100 + +#define TOS_CFG_MUTEX_EN 1u + +#define TOS_CFG_QUEUE_EN 1u + +#define TOS_CFG_TIMER_EN 1u + +#define TOS_CFG_SEM_EN 1u + +#if (TOS_CFG_QUEUE_EN > 0u) +#define TOS_CFG_MSG_EN 1u +#else +#define TOS_CFG_MSG_EN 0u +#endif + +#define TOS_CFG_MSG_POOL_SIZE 10u + +#define TOS_CFG_IDLE_TASK_STK_SIZE 80u + +#define TOS_CFG_CPU_TICK_PER_SECOND 1000u + +#define TOS_CFG_CPU_CLOCK (SystemCoreClock) + +#define TOS_CFG_TIMER_AS_PROC 1u + +#endif +