fix the floder name bug

2019-09-21 21:19:15 +08:00
parent ea3a97b152
commit ccdefc11ec
44 changed files with 0 additions and 0 deletions
--- a/board/BearPi_STM32L431RC/BSP/Src/adc.c
+++ b/board/BearPi_STM32L431RC/BSP/Src/adc.c
@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * File Name          : ADC.c
+  * Description        : This file provides code for the configuration
+  *                      of the ADC instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "adc.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+ADC_HandleTypeDef hadc1;
+
+/* ADC1 init function */
+void MX_ADC1_Init(void)
+{
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /** Common config 
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
+  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
+  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  hadc1.Init.LowPowerAutoWait = DISABLE;
+  hadc1.Init.ContinuousConvMode = DISABLE;
+  hadc1.Init.NbrOfConversion = 1;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+  hadc1.Init.DMAContinuousRequests = DISABLE;
+  hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
+  hadc1.Init.OversamplingMode = DISABLE;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure Regular Channel 
+  */
+  sConfig.Channel = ADC_CHANNEL_3;
+  sConfig.Rank = ADC_REGULAR_RANK_1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
+  sConfig.SingleDiff = ADC_SINGLE_ENDED;
+  sConfig.OffsetNumber = ADC_OFFSET_NONE;
+  sConfig.Offset = 0;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+}
+
+void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(adcHandle->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspInit 0 */
+
+  /* USER CODE END ADC1_MspInit 0 */
+    /* ADC1 clock enable */
+    __HAL_RCC_ADC_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    /**ADC1 GPIO Configuration    
+    PC2     ------> ADC1_IN3 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN ADC1_MspInit 1 */
+
+  /* USER CODE END ADC1_MspInit 1 */
+  }
+}
+
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
+{
+
+  if(adcHandle->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+  /* USER CODE END ADC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC_CLK_DISABLE();
+  
+    /**ADC1 GPIO Configuration    
+    PC2     ------> ADC1_IN3 
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
+
+  /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+  /* USER CODE END ADC1_MspDeInit 1 */
+  }
+} 
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/