PowLu/TencentOS-tiny
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

micropython: add micropython component

Browse Source
This commit is contained in:
KY-zhang-X
2022-09-29 12:10:37 +08:00
parent 1514f1cb9b
commit dd76146324
2679 changed files with 354110 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

365
components/language/micropython/drivers/cc3000/inc/cc3000_common.h Normal file
View File

@@ -0,0 +1,365 @@
/*****************************************************************************
*
* cc3000_common.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_COMMON_H__
#define __CC3000_COMMON_H__
#include "data_types.h"
//******************************************************************************
// Include files
//******************************************************************************
#include <stdlib.h>
#include <stdint.h>
//*****************************************************************************
// Prefix exported names to avoid name clash
//*****************************************************************************
#define CC3000_EXPORT(name) cc3000_ ## name
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
extern int CC3000_EXPORT(errno);
//*****************************************************************************
// ERROR CODES
//*****************************************************************************
#define ESUCCESS 0
#define EFAIL -1
#define EERROR EFAIL
//*****************************************************************************
// COMMON DEFINES
//*****************************************************************************
#define ERROR_SOCKET_INACTIVE -57
#define WLAN_ENABLE (1)
#define WLAN_DISABLE (0)
#define MAC_ADDR_LEN (6)
#define SP_PORTION_SIZE (32)
/*Defines for minimal and maximal RX buffer size. This size includes the spi
header and hci header.
The maximal buffer size derives from:
MTU + HCI header + SPI header + sendto() agrs size
The minimum buffer size derives from:
HCI header + SPI header + max args size
This buffer is used for receiving events and data.
The packet can not be longer than MTU size and CC3000 does not support
fragmentation. Note that the same buffer is used for reception of the data
and events from CC3000. That is why the minimum is defined.
The calculation for the actual size of buffer for reception is:
Given the maximal data size MAX_DATA that is expected to be received by
application, the required buffer is:
Using recv() or recvfrom():
max(CC3000_MINIMAL_RX_SIZE, MAX_DATA + HEADERS_SIZE_DATA + fromlen
+ ucArgsize + 1)
Using gethostbyname() with minimal buffer size will limit the host name
returned to 99 bytes only.
The 1 is used for the overrun detection
Buffer size increased to 130 following the add_profile() with WEP security
which requires TX buffer size of 130 bytes:
HEADERS_SIZE_EVNT + WLAN_ADD_PROFILE_WEP_PARAM_LEN + MAX SSID LEN + 4 * MAX KEY LEN = 130
MAX SSID LEN = 32
MAX SSID LEN = 13 (with add_profile only ascii key setting is supported,
therfore maximum key size is 13)
*/
#define CC3000_MINIMAL_RX_SIZE (130 + 1)
#define CC3000_MAXIMAL_RX_SIZE (1519 + 1)
/*Defines for minimal and maximal TX buffer size.
This buffer is used for sending events and data.
The packet can not be longer than MTU size and CC3000 does not support
fragmentation. Note that the same buffer is used for transmission of the data
and commands. That is why the minimum is defined.
The calculation for the actual size of buffer for transmission is:
Given the maximal data size MAX_DATA, the required buffer is:
Using Sendto():
max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE
+ SOCKET_SENDTO_PARAMS_LEN + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1)
Using Send():
max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE
+ HCI_CMND_SEND_ARG_LENGTH + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1)
The 1 is used for the overrun detection */
#define CC3000_MINIMAL_TX_SIZE (130 + 1)
#define CC3000_MAXIMAL_TX_SIZE (1519 + 1)
//TX and RX buffer sizes, allow to receive and transmit maximum data at length 8.
#ifdef CC3000_TINY_DRIVER
#define TINY_CC3000_MAXIMAL_RX_SIZE 44
#define TINY_CC3000_MAXIMAL_TX_SIZE 59
#endif
/*In order to determine your preferred buffer size,
change CC3000_MAXIMAL_RX_SIZE and CC3000_MAXIMAL_TX_SIZE to a value between
the minimal and maximal specified above.
Note that the buffers are allocated by SPI.
In case you change the size of those buffers, you might need also to change
the linker file, since for example on MSP430 FRAM devices the buffers are
allocated in the FRAM section that is allocated manually and not by IDE.
*/
#ifndef CC3000_TINY_DRIVER
#define CC3000_RX_BUFFER_SIZE (CC3000_MAXIMAL_RX_SIZE)
#define CC3000_TX_BUFFER_SIZE (CC3000_MAXIMAL_TX_SIZE)
//if defined TINY DRIVER we use smaller RX and TX buffer in order to minimize RAM consumption
#else
#define CC3000_RX_BUFFER_SIZE (TINY_CC3000_MAXIMAL_RX_SIZE)
#define CC3000_TX_BUFFER_SIZE (TINY_CC3000_MAXIMAL_TX_SIZE)
#endif
//*****************************************************************************
// Compound Types
//*****************************************************************************
typedef INT32 cc3000_time_t;
typedef UINT32 clock_t;
typedef INT32 suseconds_t;
typedef struct cc3000_timeval cc3000_timeval;
struct cc3000_timeval
{
cc3000_time_t tv_sec; /* seconds */
suseconds_t tv_usec; /* microseconds */
};
typedef CHAR *(*tFWPatches)(UINT32 *usLength);
typedef CHAR *(*tDriverPatches)(UINT32 *usLength);
typedef CHAR *(*tBootLoaderPatches)(UINT32 *usLength);
typedef void (*tWlanCB)(INT32 event_type, CHAR * data, UINT8 length );
typedef INT32 (*tWlanReadInteruptPin)(void);
typedef void (*tWlanInterruptEnable)(void);
typedef void (*tWlanInterruptDisable)(void);
typedef void (*tWriteWlanPin)(UINT8 val);
typedef struct
{
UINT16 usRxEventOpcode;
UINT16 usEventOrDataReceived;
UINT8 *pucReceivedData;
UINT8 *pucTxCommandBuffer;
tFWPatches sFWPatches;
tDriverPatches sDriverPatches;
tBootLoaderPatches sBootLoaderPatches;
tWlanCB sWlanCB;
tWlanReadInteruptPin ReadWlanInterruptPin;
tWlanInterruptEnable WlanInterruptEnable;
tWlanInterruptDisable WlanInterruptDisable;
tWriteWlanPin WriteWlanPin;
INT32 slTransmitDataError;
UINT16 usNumberOfFreeBuffers;
UINT16 usSlBufferLength;
UINT16 usBufferSize;
UINT16 usRxDataPending;
UINT32 NumberOfSentPackets;
UINT32 NumberOfReleasedPackets;
UINT8 InformHostOnTxComplete;
}sSimplLinkInformation;
extern volatile sSimplLinkInformation tSLInformation;
//*****************************************************************************
// Prototypes for the APIs.
//*****************************************************************************
//*****************************************************************************
//
//! SimpleLinkWaitEvent
//!
//! @param usOpcode command operation code
//! @param pRetParams command return parameters
//!
//! @return none
//!
//! @brief Wait for event, pass it to the hci_event_handler and
//! update the event opcode in a global variable.
//
//*****************************************************************************
extern void SimpleLinkWaitEvent(UINT16 usOpcode, void *pRetParams);
//*****************************************************************************
//
//! SimpleLinkWaitData
//!
//! @param pBuf data buffer
//! @param from from information
//! @param fromlen from information length
//!
//! @return none
//!
//! @brief Wait for data, pass it to the hci_event_handler
//! and update in a global variable that there is
//! data to read.
//
//*****************************************************************************
extern void SimpleLinkWaitData(UINT8 *pBuf, UINT8 *from, UINT8 *fromlen);
//*****************************************************************************
//
//! UINT32_TO_STREAM_f
//!
//! \param p pointer to the new stream
//! \param u32 pointer to the 32 bit
//!
//! \return pointer to the new stream
//!
//! \brief This function is used for copying 32 bit to stream
//! while converting to little endian format.
//
//*****************************************************************************
extern UINT8* UINT32_TO_STREAM_f (UINT8 *p, UINT32 u32);
//*****************************************************************************
//
//! UINT16_TO_STREAM_f
//!
//! \param p pointer to the new stream
//! \param u32 pointer to the 16 bit
//!
//! \return pointer to the new stream
//!
//! \brief This function is used for copying 16 bit to stream
//! while converting to little endian format.
//
//*****************************************************************************
extern UINT8* UINT16_TO_STREAM_f (UINT8 *p, UINT16 u16);
//*****************************************************************************
//
//! STREAM_TO_UINT16_f
//!
//! \param p pointer to the stream
//! \param offset offset in the stream
//!
//! \return pointer to the new 16 bit
//!
//! \brief This function is used for copying received stream to
//! 16 bit in little endian format.
//
//*****************************************************************************
extern UINT16 STREAM_TO_UINT16_f(CHAR* p, UINT16 offset);
//*****************************************************************************
//
//! STREAM_TO_UINT32_f
//!
//! \param p pointer to the stream
//! \param offset offset in the stream
//!
//! \return pointer to the new 32 bit
//!
//! \brief This function is used for copying received stream to
//! 32 bit in little endian format.
//
//*****************************************************************************
extern UINT32 STREAM_TO_UINT32_f(CHAR* p, UINT16 offset);
//*****************************************************************************
// COMMON MACROs
//*****************************************************************************
//This macro is used for copying 8 bit to stream while converting to little endian format.
#define UINT8_TO_STREAM(_p, _val) {*(_p)++ = (_val);}
//This macro is used for copying 16 bit to stream while converting to little endian format.
#define UINT16_TO_STREAM(_p, _u16) (UINT16_TO_STREAM_f(_p, _u16))
//This macro is used for copying 32 bit to stream while converting to little endian format.
#define UINT32_TO_STREAM(_p, _u32) (UINT32_TO_STREAM_f(_p, _u32))
//This macro is used for copying a specified value length bits (l) to stream while converting to little endian format.
#define ARRAY_TO_STREAM(p, a, l) {register INT16 _i; for (_i = 0; _i < l; _i++) *(p)++ = ((UINT8 *) a)[_i];}
//This macro is used for copying received stream to 8 bit in little endian format.
#define STREAM_TO_UINT8(_p, _offset, _u8) {_u8 = (UINT8)(*(_p + _offset));}
//This macro is used for copying received stream to 16 bit in little endian format.
#define STREAM_TO_UINT16(_p, _offset, _u16) {_u16 = STREAM_TO_UINT16_f(_p, _offset);}
//This macro is used for copying received stream to 32 bit in little endian format.
#define STREAM_TO_UINT32(_p, _offset, _u32) {_u32 = STREAM_TO_UINT32_f(_p, _offset);}
#define STREAM_TO_STREAM(p, a, l) {register INT16 _i; for (_i = 0; _i < l; _i++) *(a)++= ((UINT8 *) p)[_i];}
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_COMMON_H__

84
components/language/micropython/drivers/cc3000/inc/ccspi.h Normal file
View File

@@ -0,0 +1,84 @@
/*****************************************************************************
*
* spi.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_SPI_H__
#define __CC3000_SPI_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
typedef void (*gcSpiHandleRx)(void *p);
typedef void (*gcSpiHandleTx)(void);
extern unsigned char wlan_tx_buffer[];
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
// the arguments must be of type pin_obj_t* and SPI_HandleTypeDef*
extern void SpiInit(void *spi, const void *pin_cs, const void *pin_en, const void *pin_irq);
extern void SpiOpen(gcSpiHandleRx pfRxHandler);
extern void SpiClose(void);
extern void SpiPauseSpi(void);
extern void SpiResumeSpi(void);
extern long SpiWrite(unsigned char *pUserBuffer, unsigned short usLength);
extern void SpiConfigureHwMapping(void);
extern void SpiCleanGPIOISR(void);
extern void SSIConfigure(unsigned long ulSSIFreq, unsigned long bForceGpioConfiguration, unsigned long uiReconfigureSysClock);
extern int init_spi(void);
extern long ReadWlanInterruptPin(void);
extern void WriteWlanPin(unsigned char val);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif

107
components/language/micropython/drivers/cc3000/inc/data_types.h Normal file
View File

@@ -0,0 +1,107 @@
/*****************************************************************************
*
* data_types.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_DATA_TYPES__
#define __CC3000_DATA_TYPES__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
#ifndef NULL
#define NULL (0)
#endif
#ifndef FALSE
#define FALSE (0)
#endif
#ifndef TRUE
#define TRUE (!FALSE)
#endif
#ifndef OK
#define OK (0)
#endif
#ifndef _INT8
#define _INT8
typedef signed char INT8;
#endif
#ifndef _UINT8
#define _UINT8
typedef unsigned char UINT8;
#endif
#ifndef _INT16
#define _INT16
typedef signed short INT16;
#endif
#ifndef _UINT16
#define _UINT16
typedef unsigned short UINT16;
#endif
#ifndef _BOOLEAN
#define _BOOLEAN
typedef unsigned char BOOLEAN;
#endif
#ifndef _INT32
#define _INT32
typedef signed long INT32;
#endif
#ifndef _UINT32
#define _UINT32
typedef unsigned long UINT32;
#endif
typedef int INT;
typedef char CHAR;
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __CC3000_DATA_TYPES__ */

166
components/language/micropython/drivers/cc3000/inc/evnt_handler.h Normal file
View File

@@ -0,0 +1,166 @@
/*****************************************************************************
*
* evnt_handler.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_EVENT_HANDLER_H__
#define __CC3000_EVENT_HANDLER_H__
#include "hci.h"
#include "socket.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
//*****************************************************************************
//
//! hci_event_handler
//!
//! @param pRetParams incoming data buffer
//! @param from from information (in case of data received)
//! @param fromlen from information length (in case of data received)
//!
//! @return none
//!
//! @brief Parse the incoming events packets and issues corresponding
//! event handler from global array of handlers pointers
//
//*****************************************************************************
extern UINT8 *hci_event_handler(void *pRetParams, UINT8 *from, UINT8 *fromlen);
//*****************************************************************************
//
//! hci_unsol_event_handler
//!
//! @param event_hdr event header
//!
//! @return 1 if event supported and handled
//! 0 if event is not supported
//!
//! @brief Handle unsolicited events
//
//*****************************************************************************
extern INT32 hci_unsol_event_handler(CHAR *event_hdr);
//*****************************************************************************
//
//! hci_unsolicited_event_handler
//!
//! @param None
//!
//! @return ESUCCESS if successful, EFAIL if an error occurred
//!
//! @brief Parse the incoming unsolicited event packets and issues
//! corresponding event handler.
//
//*****************************************************************************
extern INT32 hci_unsolicited_event_handler(void);
#define M_BSD_RESP_PARAMS_OFFSET(hci_event_hdr)((CHAR *)(hci_event_hdr) + HCI_EVENT_HEADER_SIZE)
#define SOCKET_STATUS_ACTIVE 0
#define SOCKET_STATUS_INACTIVE 1
/* Init socket_active_status = 'all ones': init all sockets with SOCKET_STATUS_INACTIVE.
Will be changed by 'set_socket_active_status' upon 'connect' and 'accept' calls */
#define SOCKET_STATUS_INIT_VAL 0xFFFF
#define M_IS_VALID_SD(sd) ((0 <= (sd)) && ((sd) <= 7))
#define M_IS_VALID_STATUS(status) (((status) == SOCKET_STATUS_ACTIVE)||((status) == SOCKET_STATUS_INACTIVE))
extern UINT32 socket_active_status;
extern void set_socket_active_status(INT32 Sd, INT32 Status);
extern INT32 get_socket_active_status(INT32 Sd);
typedef struct _bsd_accept_return_t
{
INT32 iSocketDescriptor;
INT32 iStatus;
sockaddr tSocketAddress;
} tBsdReturnParams;
typedef struct _bsd_read_return_t
{
INT32 iSocketDescriptor;
INT32 iNumberOfBytes;
UINT32 uiFlags;
} tBsdReadReturnParams;
#define BSD_RECV_FROM_FROMLEN_OFFSET (4)
#define BSD_RECV_FROM_FROM_OFFSET (16)
typedef struct _bsd_select_return_t
{
INT32 iStatus;
UINT32 uiRdfd;
UINT32 uiWrfd;
UINT32 uiExfd;
} tBsdSelectRecvParams;
typedef struct _bsd_getsockopt_return_t
{
UINT8 ucOptValue[4];
CHAR iStatus;
} tBsdGetSockOptReturnParams;
typedef struct _bsd_gethostbyname_return_t
{
INT32 retVal;
INT32 outputAddress;
} tBsdGethostbynameParams;
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_EVENT_HANDLER_H__

330
components/language/micropython/drivers/cc3000/inc/hci.h Normal file
View File

@@ -0,0 +1,330 @@
/*****************************************************************************
*
* hci.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_HCI_H__
#define __CC3000_HCI_H__
#include "cc3000_common.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
#define SPI_HEADER_SIZE (5)
#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE (4)
#define HEADERS_SIZE_CMD (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE)
#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE (5)
#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE (5)
#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE (2)
//*****************************************************************************
//
// Values that can be used as HCI Commands and HCI Packet header defines
//
//*****************************************************************************
#define HCI_TYPE_CMND 0x1
#define HCI_TYPE_DATA 0x2
#define HCI_TYPE_PATCH 0x3
#define HCI_TYPE_EVNT 0x4
#define HCI_EVENT_PATCHES_DRV_REQ (1)
#define HCI_EVENT_PATCHES_FW_REQ (2)
#define HCI_EVENT_PATCHES_BOOTLOAD_REQ (3)
#define HCI_CMND_WLAN_BASE (0x0000)
#define HCI_CMND_WLAN_CONNECT 0x0001
#define HCI_CMND_WLAN_DISCONNECT 0x0002
#define HCI_CMND_WLAN_IOCTL_SET_SCANPARAM 0x0003
#define HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY 0x0004
#define HCI_CMND_WLAN_IOCTL_ADD_PROFILE 0x0005
#define HCI_CMND_WLAN_IOCTL_DEL_PROFILE 0x0006
#define HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS 0x0007
#define HCI_CMND_EVENT_MASK 0x0008
#define HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009
#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START 0x000A
#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP 0x000B
#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX 0x000C
#define HCI_CMND_WLAN_CONFIGURE_PATCH 0x000D
#define HCI_CMND_SOCKET_BASE 0x1000
#define HCI_CMND_SOCKET 0x1001
#define HCI_CMND_BIND 0x1002
#define HCI_CMND_RECV 0x1004
#define HCI_CMND_ACCEPT 0x1005
#define HCI_CMND_LISTEN 0x1006
#define HCI_CMND_CONNECT 0x1007
#define HCI_CMND_BSD_SELECT 0x1008
#define HCI_CMND_SETSOCKOPT 0x1009
#define HCI_CMND_GETSOCKOPT 0x100A
#define HCI_CMND_CLOSE_SOCKET 0x100B
#define HCI_CMND_RECVFROM 0x100D
#define HCI_CMND_GETHOSTNAME 0x1010
#define HCI_CMND_MDNS_ADVERTISE 0x1011
#define HCI_CMND_GETMSSVALUE 0x1012
#define HCI_DATA_BASE 0x80
#define HCI_CMND_SEND (0x01 + HCI_DATA_BASE)
#define HCI_CMND_SENDTO (0x03 + HCI_DATA_BASE)
#define HCI_DATA_BSD_RECVFROM (0x04 + HCI_DATA_BASE)
#define HCI_DATA_BSD_RECV (0x05 + HCI_DATA_BASE)
#define HCI_CMND_NVMEM_CBASE (0x0200)
#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203)
#define HCI_CMND_NVMEM_SWAP_ENTRY (0x0205)
#define HCI_CMND_NVMEM_READ (0x0201)
#define HCI_CMND_NVMEM_WRITE (0x0090)
#define HCI_CMND_NVMEM_WRITE_PATCH (0x0204)
#define HCI_CMND_READ_SP_VERSION (0x0207)
#define HCI_CMND_READ_BUFFER_SIZE 0x400B
#define HCI_CMND_SIMPLE_LINK_START 0x4000
#define HCI_CMND_NETAPP_BASE 0x2000
#define HCI_NETAPP_DHCP (0x0001 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_PING_SEND (0x0002 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_PING_REPORT (0x0003 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_PING_STOP (0x0004 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_IPCONFIG (0x0005 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_ARP_FLUSH (0x0006 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_SET_DEBUG_LEVEL (0x0008 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_SET_TIMERS (0x0009 + HCI_CMND_NETAPP_BASE)
//*****************************************************************************
//
// Values that can be used as HCI Events defines
//
//*****************************************************************************
#define HCI_EVNT_WLAN_BASE 0x0000
#define HCI_EVNT_WLAN_CONNECT 0x0001
#define HCI_EVNT_WLAN_DISCONNECT \
0x0002
#define HCI_EVNT_WLAN_IOCTL_ADD_PROFILE \
0x0005
#define HCI_EVNT_SOCKET HCI_CMND_SOCKET
#define HCI_EVNT_BIND HCI_CMND_BIND
#define HCI_EVNT_RECV HCI_CMND_RECV
#define HCI_EVNT_ACCEPT HCI_CMND_ACCEPT
#define HCI_EVNT_LISTEN HCI_CMND_LISTEN
#define HCI_EVNT_CONNECT HCI_CMND_CONNECT
#define HCI_EVNT_SELECT HCI_CMND_BSD_SELECT
#define HCI_EVNT_CLOSE_SOCKET HCI_CMND_CLOSE_SOCKET
#define HCI_EVNT_RECVFROM HCI_CMND_RECVFROM
#define HCI_EVNT_SETSOCKOPT HCI_CMND_SETSOCKOPT
#define HCI_EVNT_GETSOCKOPT HCI_CMND_GETSOCKOPT
#define HCI_EVNT_BSD_GETHOSTBYNAME HCI_CMND_GETHOSTNAME
#define HCI_EVNT_MDNS_ADVERTISE HCI_CMND_MDNS_ADVERTISE
#define HCI_EVNT_GETMSSVALUE HCI_CMND_GETMSSVALUE
#define HCI_EVNT_SEND 0x1003
#define HCI_EVNT_WRITE 0x100E
#define HCI_EVNT_SENDTO 0x100F
#define HCI_EVNT_PATCHES_REQ 0x1000
#define HCI_EVNT_UNSOL_BASE 0x4000
#define HCI_EVNT_WLAN_UNSOL_BASE (0x8000)
#define HCI_EVNT_WLAN_UNSOL_CONNECT (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_UNSOL_DISCONNECT (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_UNSOL_INIT (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_TX_COMPLETE (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_UNSOL_DHCP (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_ASYNC_PING_REPORT (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_KEEPALIVE (0x0200 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_BSD_TCP_CLOSE_WAIT (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \
0x4100
#define HCI_EVNT_NVMEM_CREATE_ENTRY \
HCI_CMND_NVMEM_CREATE_ENTRY
#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY
#define HCI_EVNT_NVMEM_READ HCI_CMND_NVMEM_READ
#define HCI_EVNT_NVMEM_WRITE (0x0202)
#define HCI_EVNT_READ_SP_VERSION \
HCI_CMND_READ_SP_VERSION
#define HCI_EVNT_INPROGRESS 0xFFFF
#define HCI_DATA_RECVFROM 0x84
#define HCI_DATA_RECV 0x85
#define HCI_DATA_NVMEM 0x91
#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99
//*****************************************************************************
//
// Prototypes for the structures for APIs.
//
//*****************************************************************************
#define HCI_DATA_HEADER_SIZE (5)
#define HCI_EVENT_HEADER_SIZE (5)
#define HCI_DATA_CMD_HEADER_SIZE (5)
#define HCI_PATCH_HEADER_SIZE (6)
#define HCI_PACKET_TYPE_OFFSET (0)
#define HCI_PACKET_ARGSIZE_OFFSET (2)
#define HCI_PACKET_LENGTH_OFFSET (3)
#define HCI_EVENT_OPCODE_OFFSET (1)
#define HCI_EVENT_LENGTH_OFFSET (3)
#define HCI_EVENT_STATUS_OFFSET (4)
#define HCI_DATA_LENGTH_OFFSET (3)
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
//*****************************************************************************
//
//! hci_command_send
//!
//! @param usOpcode command operation code
//! @param pucBuff pointer to the command's arguments buffer
//! @param ucArgsLength length of the arguments
//!
//! @return none
//!
//! @brief Initiate an HCI command.
//
//*****************************************************************************
extern UINT16 hci_command_send(UINT16 usOpcode,
UINT8 *ucArgs,
UINT8 ucArgsLength);
//*****************************************************************************
//
//! hci_data_send
//!
//! @param usOpcode command operation code
//! @param ucArgs pointer to the command's arguments buffer
//! @param usArgsLength length of the arguments
//! @param ucTail pointer to the data buffer
//! @param usTailLength buffer length
//!
//! @return none
//!
//! @brief Initiate an HCI data write operation
//
//*****************************************************************************
extern INT32 hci_data_send(UINT8 ucOpcode,
UINT8 *ucArgs,
UINT16 usArgsLength,
UINT16 usDataLength,
const UINT8 *ucTail,
UINT16 usTailLength);
//*****************************************************************************
//
//! hci_data_command_send
//!
//! @param usOpcode command operation code
//! @param pucBuff pointer to the data buffer
//! @param ucArgsLength arguments length
//! @param ucDataLength data length
//!
//! @return none
//!
//! @brief Prepare HCI header and initiate an HCI data write operation
//
//*****************************************************************************
extern void hci_data_command_send(UINT16 usOpcode, UINT8 *pucBuff,
UINT8 ucArgsLength, UINT16 ucDataLength);
//*****************************************************************************
//
//! hci_patch_send
//!
//! @param usOpcode command operation code
//! @param pucBuff pointer to the command's arguments buffer
//! @param patch pointer to patch content buffer
//! @param usDataLength data length
//!
//! @return none
//!
//! @brief Prepare HCI header and initiate an HCI patch write operation
//
//*****************************************************************************
extern void hci_patch_send(UINT8 ucOpcode, UINT8 *pucBuff, CHAR *patch, UINT16 usDataLength);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_HCI_H__

40
components/language/micropython/drivers/cc3000/inc/host_driver_version.h Normal file
View File

@@ -0,0 +1,40 @@
/*****************************************************************************
*
* host_driver_version.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_HOST_DRIVER_VERSION_H__
#define __CC3000_HOST_DRIVER_VERSION_H__
#define DRIVER_VERSION_NUMBER 15
#endif // __CC3000_HOST_DRIVER_VERSION_H__

4
components/language/micropython/drivers/cc3000/inc/inet_ntop.h Normal file
View File

@@ -0,0 +1,4 @@
#ifndef __INET_NTOP_H
#define __INET_NTOP_H
char *inet_ntop(int af, const void *addr, char *buf, size_t size);
#endif /* __INET_NTOP_H */

4
components/language/micropython/drivers/cc3000/inc/inet_pton.h Normal file
View File

@@ -0,0 +1,4 @@
#ifndef __INET_PTON_H
#define __INET_PTON_H
int inet_pton(int, const char *, void *);
#endif /* __INET_PTON_H */

343
components/language/micropython/drivers/cc3000/inc/netapp.h Normal file
View File

@@ -0,0 +1,343 @@
/*****************************************************************************
*
* netapp.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_NETAPP_H__
#define __CC3000_NETAPP_H__
#include "data_types.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
//*****************************************************************************
//
//! \addtogroup netapp_api
//! @{
//
//*****************************************************************************
typedef struct _netapp_dhcp_ret_args_t
{
UINT8 aucIP[4];
UINT8 aucSubnetMask[4];
UINT8 aucDefaultGateway[4];
UINT8 aucDHCPServer[4];
UINT8 aucDNSServer[4];
}tNetappDhcpParams;
typedef struct _netapp_ipconfig_ret_args_t
{
UINT8 aucIP[4];
UINT8 aucSubnetMask[4];
UINT8 aucDefaultGateway[4];
UINT8 aucDHCPServer[4];
UINT8 aucDNSServer[4];
UINT8 uaMacAddr[6];
UINT8 uaSSID[32];
}tNetappIpconfigRetArgs;
/*Ping send report parameters*/
typedef struct _netapp_pingreport_args
{
UINT32 packets_sent;
UINT32 packets_received;
UINT32 min_round_time;
UINT32 max_round_time;
UINT32 avg_round_time;
} netapp_pingreport_args_t;
//*****************************************************************************
//
//! netapp_config_mac_adrress
//!
//! @param mac device mac address, 6 bytes. Saved: yes
//!
//! @return return on success 0, otherwise error.
//!
//! @brief Configure device MAC address and store it in NVMEM.
//! The value of the MAC address configured through the API will
//! be stored in CC3000 non volatile memory, thus preserved
//! over resets.
//
//*****************************************************************************
extern INT32 netapp_config_mac_adrress( UINT8 *mac );
//*****************************************************************************
//
//! netapp_dhcp
//!
//! @param aucIP device mac address, 6 bytes. Saved: yes
//! @param aucSubnetMask device mac address, 6 bytes. Saved: yes
//! @param aucDefaultGateway device mac address, 6 bytes. Saved: yes
//! @param aucDNSServer device mac address, 6 bytes. Saved: yes
//!
//! @return return on success 0, otherwise error.
//!
//! @brief netapp_dhcp is used to configure the network interface,
//! static or dynamic (DHCP).\n In order to activate DHCP mode,
//! aucIP, aucSubnetMask, aucDefaultGateway must be 0.
//! The default mode of CC3000 is DHCP mode.
//! Note that the configuration is saved in non volatile memory
//! and thus preserved over resets.
//!
//! @note If the mode is altered a reset of CC3000 device is required
//! in order to apply changes.\nAlso note that asynchronous event
//! of DHCP_EVENT, which is generated when an IP address is
//! allocated either by the DHCP server or due to static
//! allocation is generated only upon a connection to the
//! AP was established.
//!
//*****************************************************************************
extern INT32 netapp_dhcp(UINT32 *aucIP, UINT32 *aucSubnetMask,UINT32 *aucDefaultGateway, UINT32 *aucDNSServer);
//*****************************************************************************
//
//! netapp_timeout_values
//!
//! @param aucDHCP DHCP lease time request, also impact
//! the DHCP renew timeout. Range: [0-0xffffffff] seconds,
//! 0 or 0xffffffff == infinity lease timeout.
//! Resolution:10 seconds. Influence: only after
//! reconnecting to the AP.
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 seconds.
//! The parameter is saved into the CC3000 NVMEM.
//! The default value on CC3000 is 14400 seconds.
//!
//! @param aucARP ARP refresh timeout, if ARP entry is not updated by
//! incoming packet, the ARP entry will be deleted by
//! the end of the timeout.
//! Range: [0-0xffffffff] seconds, 0 == infinity ARP timeout
//! Resolution: 10 seconds. Influence: on runtime.
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 seconds
//! The parameter is saved into the CC3000 NVMEM.
//! The default value on CC3000 is 3600 seconds.
//!
//! @param aucKeepalive Keepalive event sent by the end of keepalive timeout
//! Range: [0-0xffffffff] seconds, 0 == infinity timeout
//! Resolution: 10 seconds.
//! Influence: on runtime.
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 sec
//! The parameter is saved into the CC3000 NVMEM.
//! The default value on CC3000 is 10 seconds.
//!
//! @param aucInactivity Socket inactivity timeout, socket timeout is
//! refreshed by incoming or outgoing packet, by the
//! end of the socket timeout the socket will be closed
//! Range: [0-0xffffffff] sec, 0 == infinity timeout.
//! Resolution: 10 seconds. Influence: on runtime.
//! Minimal bound value: MIN_TIMER_VAL_SECONDS - 10 sec
//! The parameter is saved into the CC3000 NVMEM.
//! The default value on CC3000 is 60 seconds.
//!
//! @return return on success 0, otherwise error.
//!
//! @brief Set new timeout values. Function set new timeout values for:
//! DHCP lease timeout, ARP refresh timeout, keepalive event
//! timeout and socket inactivity timeout
//!
//! @note If a parameter set to non zero value which is less than 10s,
//! it will be set automatically to 10s.
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT32 netapp_timeout_values(UINT32 *aucDHCP, UINT32 *aucARP, UINT32 *aucKeepalive, UINT32 *aucInactivity);
#endif
//*****************************************************************************
//
//! netapp_ping_send
//!
//! @param ip destination IP address
//! @param pingAttempts number of echo requests to send
//! @param pingSize send buffer size which may be up to 1400 bytes
//! @param pingTimeout Time to wait for a response,in milliseconds.
//!
//! @return return on success 0, otherwise error.
//!
//! @brief send ICMP ECHO_REQUEST to network hosts
//!
//! @note If an operation finished successfully asynchronous ping report
//! event will be generated. The report structure is as defined
//! by structure netapp_pingreport_args_t.
//!
//! @warning Calling this function while a previous Ping Requests are in
//! progress will stop the previous ping request.
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT32 netapp_ping_send(UINT32 *ip, UINT32 ulPingAttempts, UINT32 ulPingSize, UINT32 ulPingTimeout);
#endif
//*****************************************************************************
//
//! netapp_ping_stop
//!
//! @param none
//!
//! @return On success, zero is returned. On error, -1 is returned.
//!
//! @brief Stop any ping request.
//!
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT32 netapp_ping_stop();
#endif
//*****************************************************************************
//
//! netapp_ping_report
//!
//! @param none
//!
//! @return none
//!
//! @brief Request for ping status. This API triggers the CC3000 to send
//! asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT.
//! This event will carry the report structure:
//! netapp_pingreport_args_t. This structure is filled in with ping
//! results up till point of triggering API.
//! netapp_pingreport_args_t:\n packets_sent - echo sent,
//! packets_received - echo reply, min_round_time - minimum
//! round time, max_round_time - max round time,
//! avg_round_time - average round time
//!
//! @note When a ping operation is not active, the returned structure
//! fields are 0.
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern void netapp_ping_report();
#endif
//*****************************************************************************
//
//! netapp_ipconfig
//!
//! @param[out] ipconfig This argument is a pointer to a
//! tNetappIpconfigRetArgs structure. This structure is
//! filled in with the network interface configuration.
//! tNetappIpconfigRetArgs:\n aucIP - ip address,
//! aucSubnetMask - mask, aucDefaultGateway - default
//! gateway address, aucDHCPServer - dhcp server address
//! aucDNSServer - dns server address, uaMacAddr - mac
//! address, uaSSID - connected AP ssid
//!
//! @return none
//!
//! @brief Obtain the CC3000 Network interface information.
//! Note that the information is available only after the WLAN
//! connection was established. Calling this function before
//! associated, will cause non-defined values to be returned.
//!
//! @note The function is useful for figuring out the IP Configuration of
//! the device when DHCP is used and for figuring out the SSID of
//! the Wireless network the device is associated with.
//!
//*****************************************************************************
extern void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig );
//*****************************************************************************
//
//! netapp_arp_flush
//!
//! @param none
//!
//! @return none
//!
//! @brief Flushes ARP table
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT32 netapp_arp_flush();
#endif
//*****************************************************************************
//
//! netapp_set_debug_level
//!
//! @param[in] level debug level. Bitwise [0-8],
//! 0(disable)or 1(enable).\n Bitwise map: 0 - Critical
//! message, 1 information message, 2 - core messages, 3 -
//! HCI messages, 4 - Network stack messages, 5 - wlan
//! messages, 6 - wlan driver messages, 7 - epprom messages,
//! 8 - general messages. Default: 0x13f. Saved: no
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Debug messages sent via the UART debug channel, this function
//! enable/disable the debug level
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
INT32 netapp_set_debug_level(UINT32 ulLevel);
#endif
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_NETAPP_H__

248
components/language/micropython/drivers/cc3000/inc/nvmem.h Normal file
View File

@@ -0,0 +1,248 @@
/*****************************************************************************
*
* nvmem.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_NVRAM_H__
#define __CC3000_NVRAM_H__
#include "cc3000_common.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
//*****************************************************************************
//
//! \addtogroup nvmem_api
//! @{
//
//*****************************************************************************
/****************************************************************************
**
** Definitions for File IDs
**
****************************************************************************/
/* NVMEM file ID - system files*/
#define NVMEM_NVS_FILEID (0)
#define NVMEM_NVS_SHADOW_FILEID (1)
#define NVMEM_WLAN_CONFIG_FILEID (2)
#define NVMEM_WLAN_CONFIG_SHADOW_FILEID (3)
#define NVMEM_WLAN_DRIVER_SP_FILEID (4)
#define NVMEM_WLAN_FW_SP_FILEID (5)
#define NVMEM_MAC_FILEID (6)
#define NVMEM_FRONTEND_VARS_FILEID (7)
#define NVMEM_IP_CONFIG_FILEID (8)
#define NVMEM_IP_CONFIG_SHADOW_FILEID (9)
#define NVMEM_BOOTLOADER_SP_FILEID (10)
#define NVMEM_RM_FILEID (11)
/* NVMEM file ID - user files*/
#define NVMEM_AES128_KEY_FILEID (12)
#define NVMEM_SHARED_MEM_FILEID (13)
/* max entry in order to invalid nvmem */
#define NVMEM_MAX_ENTRY (16)
//*****************************************************************************
//
//! nvmem_read
//!
//! @param ulFileId nvmem file id:\n
//! NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID,
//! NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID,
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//! NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID,
//! NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID,
//! NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID,
//! and user files 12-15.
//! @param ulLength number of bytes to read
//! @param ulOffset ulOffset in file from where to read
//! @param buff output buffer pointer
//!
//! @return on success 0, error otherwise.
//!
//! @brief Reads data from the file referred by the ulFileId parameter.
//! Reads data from file ulOffset till length. Err if the file can't
//! be used, is invalid, or if the read is out of bounds.
//!
//*****************************************************************************
extern INT32 nvmem_read(UINT32 file_id, UINT32 length, UINT32 offset, UINT8 *buff);
//*****************************************************************************
//
//! nvmem_write
//!
//! @param ulFileId nvmem file id:\n
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//! NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID,
//! and user files 12-15.
//! @param ulLength number of bytes to write
//! @param ulEntryOffset offset in file to start write operation from
//! @param buff data to write
//!
//! @return on success 0, error otherwise.
//!
//! @brief Write data to nvmem.
//! writes data to file referred by the ulFileId parameter.
//! Writes data to file ulOffset till ulLength.The file id will be
//! marked invalid till the write is done. The file entry doesn't
//! need to be valid - only allocated.
//!
//*****************************************************************************
extern INT32 nvmem_write(UINT32 ulFileId, UINT32 ulLength, UINT32 ulEntryOffset, UINT8 *buff);
//*****************************************************************************
//
//! nvmem_set_mac_address
//!
//! @param mac mac address to be set
//!
//! @return on success 0, error otherwise.
//!
//! @brief Write MAC address to EEPROM.
//! mac address as appears over the air (OUI first)
//!
//*****************************************************************************
extern UINT8 nvmem_set_mac_address(UINT8 *mac);
//*****************************************************************************
//
//! nvmem_get_mac_address
//!
//! @param[out] mac mac address
//!
//! @return on success 0, error otherwise.
//!
//! @brief Read MAC address from EEPROM.
//! mac address as appears over the air (OUI first)
//!
//*****************************************************************************
extern UINT8 nvmem_get_mac_address(UINT8 *mac);
//*****************************************************************************
//
//! nvmem_write_patch
//!
//! @param ulFileId nvmem file id:\n
//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//! @param spLength number of bytes to write
//! @param spData SP data to write
//!
//! @return on success 0, error otherwise.
//!
//! @brief program a patch to a specific file ID.
//! The SP data is assumed to be organized in 2-dimensional.
//! Each line is SP_PORTION_SIZE bytes long. Actual programming is
//! applied in SP_PORTION_SIZE bytes portions.
//!
//*****************************************************************************
extern UINT8 nvmem_write_patch(UINT32 ulFileId, UINT32 spLength, const UINT8 *spData);
//*****************************************************************************
//
//! nvmem_read_sp_version
//!
//! @param[out] patchVer first number indicates package ID and the second
//! number indicates package build number
//!
//! @return on success 0, error otherwise.
//!
//! @brief Read patch version. read package version (WiFi FW patch,
//! driver-supplicant-NS patch, bootloader patch)
//!
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern UINT8 nvmem_read_sp_version(UINT8* patchVer);
#endif
//*****************************************************************************
//
//! nvmem_create_entry
//!
//! @param ulFileId nvmem file Id:\n
//! * NVMEM_AES128_KEY_FILEID: 12
//! * NVMEM_SHARED_MEM_FILEID: 13
//! * and fileIDs 14 and 15
//! @param ulNewLen entry ulLength
//!
//! @return on success 0, error otherwise.
//!
//! @brief Create new file entry and allocate space on the NVMEM.
//! Applies only to user files.
//! Modify the size of file.
//! If the entry is unallocated - allocate it to size
//! ulNewLen (marked invalid).
//! If it is allocated then deallocate it first.
//! To just mark the file as invalid without resizing -
//! set ulNewLen=0.
//!
//*****************************************************************************
extern INT32 nvmem_create_entry(UINT32 file_id, UINT32 newlen);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_NVRAM_H__

11
components/language/micropython/drivers/cc3000/inc/patch_prog.h Normal file
View File

@@ -0,0 +1,11 @@
#ifndef __CC3000_PATCH_PROG_H__
#define __CC3000_PATCH_PROG_H__
extern unsigned short fw_length;
extern const unsigned char fw_patch[];
extern unsigned short drv_length;
extern const unsigned char wlan_drv_patch[];
extern const unsigned char cRMdefaultParams[128];
void patch_prog_start();
#endif //__CC3000_PATCH_PROG_H__

130
components/language/micropython/drivers/cc3000/inc/security.h Normal file
View File

@@ -0,0 +1,130 @@
/*****************************************************************************
*
* security.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_SECURITY__
#define __CC3000_SECURITY__
#include "nvmem.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
#define AES128_KEY_SIZE 16
#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
//*****************************************************************************
//
//! aes_encrypt
//!
//! @param[in] key AES128 key of size 16 bytes
//! @param[in\out] state 16 bytes of plain text and cipher text
//!
//! @return none
//!
//! @brief AES128 encryption:
//! Given AES128 key and 16 bytes plain text, cipher text of 16 bytes
//! is computed. The AES implementation is in mode ECB (Electronic
//! Code Book).
//!
//!
//*****************************************************************************
extern void aes_encrypt(UINT8 *state, UINT8 *key);
//*****************************************************************************
//
//! aes_decrypt
//!
//! @param[in] key AES128 key of size 16 bytes
//! @param[in\out] state 16 bytes of cipher text and plain text
//!
//! @return none
//!
//! @brief AES128 decryption:
//! Given AES128 key and 16 bytes cipher text, plain text of 16 bytes
//! is computed The AES implementation is in mode ECB
//! (Electronic Code Book).
//!
//!
//*****************************************************************************
extern void aes_decrypt(UINT8 *state, UINT8 *key);
//*****************************************************************************
//
//! aes_read_key
//!
//! @param[out] key AES128 key of size 16 bytes
//!
//! @return on success 0, error otherwise.
//!
//! @brief Reads AES128 key from EEPROM
//! Reads the AES128 key from fileID #12 in EEPROM
//! returns an error if the key does not exist.
//!
//!
//*****************************************************************************
extern INT32 aes_read_key(UINT8 *key);
//*****************************************************************************
//
//! aes_write_key
//!
//! @param[out] key AES128 key of size 16 bytes
//!
//! @return on success 0, error otherwise.
//!
//! @brief writes AES128 key from EEPROM
//! Writes the AES128 key to fileID #12 in EEPROM
//!
//!
//*****************************************************************************
extern INT32 aes_write_key(UINT8 *key);
#endif //CC3000_UNENCRYPTED_SMART_CONFIG
#ifdef __cplusplus
}
#endif // __cplusplus
#endif

676
components/language/micropython/drivers/cc3000/inc/socket.h Normal file
View File

@@ -0,0 +1,676 @@
/*****************************************************************************
*
* socket.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_SOCKET_H__
#define __CC3000_SOCKET_H__
#include "cc3000_common.h"
//*****************************************************************************
//
//! \addtogroup socket_api
//! @{
//
//*****************************************************************************
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
#define HOSTNAME_MAX_LENGTH (230) // 230 bytes + header shouldn't exceed 8 bit value
//--------- Address Families --------
#define AF_INET 2
#define AF_INET6 23
//------------ Socket Types ------------
#define SOCK_STREAM 1
#define SOCK_DGRAM 2
#define SOCK_RAW 3 // Raw sockets allow new IPv4 protocols to be implemented in user space. A raw socket receives or sends the raw datagram not including link level headers
#define SOCK_RDM 4
#define SOCK_SEQPACKET 5
//----------- Socket Protocol ----------
#define IPPROTO_IP 0 // dummy for IP
#define IPPROTO_ICMP 1 // control message protocol
#define IPPROTO_IPV4 IPPROTO_IP // IP inside IP
#define IPPROTO_TCP 6 // tcp
#define IPPROTO_UDP 17 // user datagram protocol
#define IPPROTO_IPV6 41 // IPv6 in IPv6
#define IPPROTO_NONE 59 // No next header
#define IPPROTO_RAW 255 // raw IP packet
#define IPPROTO_MAX 256
//----------- Socket retunr codes -----------
#define SOC_ERROR (-1) // error
#define SOC_IN_PROGRESS (-2) // socket in progress
//----------- Socket Options -----------
#define SOL_SOCKET 0xffff // socket level
#define SOCKOPT_RECV_NONBLOCK 0 // recv non block mode, set SOCK_ON or SOCK_OFF (default block mode)
#define SOCKOPT_RECV_TIMEOUT 1 // optname to configure recv and recvfromtimeout
#define SOCKOPT_ACCEPT_NONBLOCK 2 // accept non block mode, set SOCK_ON or SOCK_OFF (default block mode)
#define SOCK_ON 0 // socket non-blocking mode is enabled
#define SOCK_OFF 1 // socket blocking mode is enabled
#define MAX_PACKET_SIZE 1500
#define MAX_LISTEN_QUEUE 4
#define IOCTL_SOCKET_EVENTMASK
#define ENOBUFS 55 // No buffer space available
#define __FD_SETSIZE 32
#define ASIC_ADDR_LEN 8
#define NO_QUERY_RECIVED -3
typedef struct _in_addr_t
{
UINT32 s_addr; // load with inet_aton()
} in_addr;
typedef struct _sockaddr_t
{
UINT16 sa_family;
UINT8 sa_data[14];
} sockaddr;
typedef struct _sockaddr_in_t
{
INT16 sin_family; // e.g. AF_INET
UINT16 sin_port; // e.g. htons(3490)
in_addr sin_addr; // see struct in_addr, below
CHAR sin_zero[8]; // zero this if you want to
} sockaddr_in;
typedef UINT32 socklen_t;
// The fd_set member is required to be an array of INT32s.
typedef INT32 __fd_mask;
// It's easier to assume 8-bit bytes than to get CHAR_BIT.
#define __NFDBITS (8 * sizeof (__fd_mask))
#define __FDELT(d) ((d) / __NFDBITS)
#define __FDMASK(d) ((__fd_mask) 1 << ((d) % __NFDBITS))
// fd_set for select and pselect.
typedef struct
{
__fd_mask fds_bits[__FD_SETSIZE / __NFDBITS];
#define __FDS_BITS(set) ((set)->fds_bits)
} fd_set;
// We don't use `memset' because this would require a prototype and
// the array isn't too big.
#define __FD_ZERO(set) \
do { \
UINT16 __i; \
fd_set *__arr = (set); \
for (__i = 0; __i < sizeof (fd_set) / sizeof (__fd_mask); ++__i) \
__FDS_BITS (__arr)[__i] = 0; \
} while (0)
#define __FD_SET(d, set) (__FDS_BITS (set)[__FDELT (d)] |= __FDMASK (d))
#define __FD_CLR(d, set) (__FDS_BITS (set)[__FDELT (d)] &= ~__FDMASK (d))
#define __FD_ISSET(d, set) (__FDS_BITS (set)[__FDELT (d)] & __FDMASK (d))
// Access macros for 'fd_set'.
#define FD_SET(fd, fdsetp) __FD_SET (fd, fdsetp)
#define FD_CLR(fd, fdsetp) __FD_CLR (fd, fdsetp)
#define FD_ISSET(fd, fdsetp) __FD_ISSET (fd, fdsetp)
#define FD_ZERO(fdsetp) __FD_ZERO (fdsetp)
//Use in case of Big Endian only
#define htonl(A) ((((UINT32)(A) & 0xff000000) >> 24) | \
(((UINT32)(A) & 0x00ff0000) >> 8) | \
(((UINT32)(A) & 0x0000ff00) << 8) | \
(((UINT32)(A) & 0x000000ff) << 24))
#define ntohl htonl
//Use in case of Big Endian only
#define htons(A) ((((UINT32)(A) & 0xff00) >> 8) | \
(((UINT32)(A) & 0x00ff) << 8))
#define ntohs htons
// mDNS port - 5353 mDNS multicast address - 224.0.0.251
#define SET_mDNS_ADD(sockaddr) sockaddr.sa_data[0] = 0x14; \
sockaddr.sa_data[1] = 0xe9; \
sockaddr.sa_data[2] = 0xe0; \
sockaddr.sa_data[3] = 0x0; \
sockaddr.sa_data[4] = 0x0; \
sockaddr.sa_data[5] = 0xfb;
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
//*****************************************************************************
//
//! socket
//!
//! @param domain selects the protocol family which will be used for
//! communication. On this version only AF_INET is supported
//! @param type specifies the communication semantics. On this version
//! only SOCK_STREAM, SOCK_DGRAM, SOCK_RAW are supported
//! @param protocol specifies a particular protocol to be used with the
//! socket IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW are
//! supported.
//!
//! @return On success, socket handle that is used for consequent socket
//! operations. On error, -1 is returned.
//!
//! @brief create an endpoint for communication
//! The socket function creates a socket that is bound to a specific
//! transport service provider. This function is called by the
//! application layer to obtain a socket handle.
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(socket)(INT32 domain, INT32 type, INT32 protocol);
//*****************************************************************************
//
//! closesocket
//!
//! @param sd socket handle.
//!
//! @return On success, zero is returned. On error, -1 is returned.
//!
//! @brief The socket function closes a created socket.
//
//*****************************************************************************
extern INT32 CC3000_EXPORT(closesocket)(INT32 sd);
//*****************************************************************************
//
//! accept
//!
//! @param[in] sd socket descriptor (handle)
//! @param[out] addr the argument addr is a pointer to a sockaddr structure
//! This structure is filled in with the address of the
//! peer socket, as known to the communications layer.
//! determined. The exact format of the address returned
//! addr is by the socket's address sockaddr.
//! On this version only AF_INET is supported.
//! This argument returns in network order.
//! @param[out] addrlen the addrlen argument is a value-result argument:
//! it should initially contain the size of the structure
//! pointed to by addr.
//!
//! @return For socket in blocking mode:
//! On success, socket handle. on failure negative
//! For socket in non-blocking mode:
//! - On connection establishment, socket handle
//! - On connection pending, SOC_IN_PROGRESS (-2)
//! - On failure, SOC_ERROR (-1)
//!
//! @brief accept a connection on a socket:
//! This function is used with connection-based socket types
//! (SOCK_STREAM). It extracts the first connection request on the
//! queue of pending connections, creates a new connected socket, and
//! returns a new file descriptor referring to that socket.
//! The newly created socket is not in the listening state.
//! The original socket sd is unaffected by this call.
//! The argument sd is a socket that has been created with socket(),
//! bound to a local address with bind(), and is listening for
//! connections after a listen(). The argument addr is a pointer
//! to a sockaddr structure. This structure is filled in with the
//! address of the peer socket, as known to the communications layer.
//! The exact format of the address returned addr is determined by the
//! socket's address family. The addrlen argument is a value-result
//! argument: it should initially contain the size of the structure
//! pointed to by addr, on return it will contain the actual
//! length (in bytes) of the address returned.
//!
//! @sa socket ; bind ; listen
//
//*****************************************************************************
extern INT32 CC3000_EXPORT(accept)(INT32 sd, sockaddr *addr, socklen_t *addrlen);
//*****************************************************************************
//
//! bind
//!
//! @param[in] sd socket descriptor (handle)
//! @param[out] addr specifies the destination address. On this version
//! only AF_INET is supported.
//! @param[out] addrlen contains the size of the structure pointed to by addr.
//!
//! @return On success, zero is returned. On error, -1 is returned.
//!
//! @brief assign a name to a socket
//! This function gives the socket the local address addr.
//! addr is addrlen bytes long. Traditionally, this is called when a
//! socket is created with socket, it exists in a name space (address
//! family) but has no name assigned.
//! It is necessary to assign a local address before a SOCK_STREAM
//! socket may receive connections.
//!
//! @sa socket ; accept ; listen
//
//*****************************************************************************
extern INT32 CC3000_EXPORT(bind)(INT32 sd, const sockaddr *addr, INT32 addrlen);
//*****************************************************************************
//
//! listen
//!
//! @param[in] sd socket descriptor (handle)
//! @param[in] backlog specifies the listen queue depth. On this version
//! backlog is not supported.
//! @return On success, zero is returned. On error, -1 is returned.
//!
//! @brief listen for connections on a socket
//! The willingness to accept incoming connections and a queue
//! limit for incoming connections are specified with listen(),
//! and then the connections are accepted with accept.
//! The listen() call applies only to sockets of type SOCK_STREAM
//! The backlog parameter defines the maximum length the queue of
//! pending connections may grow to.
//!
//! @sa socket ; accept ; bind
//!
//! @note On this version, backlog is not supported
//
//*****************************************************************************
extern INT32 CC3000_EXPORT(listen)(INT32 sd, INT32 backlog);
//*****************************************************************************
//
//! gethostbyname
//!
//! @param[in] hostname host name
//! @param[in] usNameLen name length
//! @param[out] out_ip_addr This parameter is filled in with host IP address.
//! In case that host name is not resolved,
//! out_ip_addr is zero.
//! @return On success, positive is returned. On error, negative is returned
//!
//! @brief Get host IP by name. Obtain the IP Address of machine on network,
//! by its name.
//!
//! @note On this version, only blocking mode is supported. Also note that
//! the function requires DNS server to be configured prior to its usage.
//
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT16 CC3000_EXPORT(gethostbyname)(CHAR * hostname, UINT16 usNameLen, UINT32* out_ip_addr);
#endif
//*****************************************************************************
//
//! connect
//!
//! @param[in] sd socket descriptor (handle)
//! @param[in] addr specifies the destination addr. On this version
//! only AF_INET is supported.
//! @param[out] addrlen contains the size of the structure pointed to by addr
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief initiate a connection on a socket
//! Function connects the socket referred to by the socket descriptor
//! sd, to the address specified by addr. The addrlen argument
//! specifies the size of addr. The format of the address in addr is
//! determined by the address space of the socket. If it is of type
//! SOCK_DGRAM, this call specifies the peer with which the socket is
//! to be associated; this address is that to which datagrams are to be
//! sent, and the only address from which datagrams are to be received.
//! If the socket is of type SOCK_STREAM, this call attempts to make a
//! connection to another socket. The other socket is specified by
//! address, which is an address in the communications space of the
//! socket. Note that the function implements only blocking behavior
//! thus the caller will be waiting either for the connection
//! establishment or for the connection establishment failure.
//!
//! @sa socket
//
//*****************************************************************************
extern INT32 CC3000_EXPORT(connect)(INT32 sd, const sockaddr *addr, INT32 addrlen);
//*****************************************************************************
//
//! select
//!
//! @param[in] nfds the highest-numbered file descriptor in any of the
//! three sets, plus 1.
//! @param[out] writesds socket descriptors list for write monitoring
//! @param[out] readsds socket descriptors list for read monitoring
//! @param[out] exceptsds socket descriptors list for exception monitoring
//! @param[in] timeout is an upper bound on the amount of time elapsed
//! before select() returns. Null means infinity
//! timeout. The minimum timeout is 5 milliseconds,
//! less than 5 milliseconds will be set
//! automatically to 5 milliseconds.
//! @return On success, select() returns the number of file descriptors
//! contained in the three returned descriptor sets (that is, the
//! total number of bits that are set in readfds, writefds,
//! exceptfds) which may be zero if the timeout expires before
//! anything interesting happens.
//! On error, -1 is returned.
//! *readsds - return the sockets on which Read request will
//! return without delay with valid data.
//! *writesds - return the sockets on which Write request
//! will return without delay.
//! *exceptsds - return the sockets which closed recently.
//!
//! @brief Monitor socket activity
//! Select allow a program to monitor multiple file descriptors,
//! waiting until one or more of the file descriptors become
//! "ready" for some class of I/O operation
//!
//! @Note If the timeout value set to less than 5ms it will automatically set
//! to 5ms to prevent overload of the system
//!
//! @sa socket
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(select)(INT32 nfds, fd_set *readsds, fd_set *writesds,
fd_set *exceptsds, struct cc3000_timeval *timeout);
//*****************************************************************************
//
//! setsockopt
//!
//! @param[in] sd socket handle
//! @param[in] level defines the protocol level for this option
//! @param[in] optname defines the option name to Interrogate
//! @param[in] optval specifies a value for the option
//! @param[in] optlen specifies the length of the option value
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief set socket options
//! This function manipulate the options associated with a socket.
//! Options may exist at multiple protocol levels; they are always
//! present at the uppermost socket level.
//! When manipulating socket options the level at which the option
//! resides and the name of the option must be specified.
//! To manipulate options at the socket level, level is specified as
//! SOL_SOCKET. To manipulate options at any other level the protocol
//! number of the appropriate protocol controlling the option is
//! supplied. For example, to indicate that an option is to be
//! interpreted by the TCP protocol, level should be set to the
//! protocol number of TCP;
//! The parameters optval and optlen are used to access optval -
//! use for setsockopt(). For getsockopt() they identify a buffer
//! in which the value for the requested option(s) are to
//! be returned. For getsockopt(), optlen is a value-result
//! parameter, initially containing the size of the buffer
//! pointed to by option_value, and modified on return to
//! indicate the actual size of the value returned. If no option
//! value is to be supplied or returned, option_value may be NULL.
//!
//! @Note On this version the following two socket options are enabled:
//! The only protocol level supported in this version
//! is SOL_SOCKET (level).
//! 1. SOCKOPT_RECV_TIMEOUT (optname)
//! SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout
//! in milliseconds.
//! In that case optval should be pointer to UINT32.
//! 2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on
//! or off.
//! In that case optval should be SOCK_ON or SOCK_OFF (optval).
//!
//! @sa getsockopt
//
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT16 CC3000_EXPORT(setsockopt)(INT32 sd, INT32 level, INT32 optname, const void *optval,
socklen_t optlen);
#endif
//*****************************************************************************
//
//! getsockopt
//!
//! @param[in] sd socket handle
//! @param[in] level defines the protocol level for this option
//! @param[in] optname defines the option name to Interrogate
//! @param[out] optval specifies a value for the option
//! @param[out] optlen specifies the length of the option value
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief set socket options
//! This function manipulate the options associated with a socket.
//! Options may exist at multiple protocol levels; they are always
//! present at the uppermost socket level.
//! When manipulating socket options the level at which the option
//! resides and the name of the option must be specified.
//! To manipulate options at the socket level, level is specified as
//! SOL_SOCKET. To manipulate options at any other level the protocol
//! number of the appropriate protocol controlling the option is
//! supplied. For example, to indicate that an option is to be
//! interpreted by the TCP protocol, level should be set to the
//! protocol number of TCP;
//! The parameters optval and optlen are used to access optval -
//! use for setsockopt(). For getsockopt() they identify a buffer
//! in which the value for the requested option(s) are to
//! be returned. For getsockopt(), optlen is a value-result
//! parameter, initially containing the size of the buffer
//! pointed to by option_value, and modified on return to
//! indicate the actual size of the value returned. If no option
//! value is to be supplied or returned, option_value may be NULL.
//!
//! @Note On this version the following two socket options are enabled:
//! The only protocol level supported in this version
//! is SOL_SOCKET (level).
//! 1. SOCKOPT_RECV_TIMEOUT (optname)
//! SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout
//! in milliseconds.
//! In that case optval should be pointer to UINT32.
//! 2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on
//! or off.
//! In that case optval should be SOCK_ON or SOCK_OFF (optval).
//!
//! @sa setsockopt
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(getsockopt)(INT32 sd, INT32 level, INT32 optname, void *optval,
socklen_t *optlen);
//*****************************************************************************
//
//! recv
//!
//! @param[in] sd socket handle
//! @param[out] buf Points to the buffer where the message should be stored
//! @param[in] len Specifies the length in bytes of the buffer pointed to
//! by the buffer argument.
//! @param[in] flags Specifies the type of message reception.
//! On this version, this parameter is not supported.
//!
//! @return Return the number of bytes received, or -1 if an error
//! occurred
//!
//! @brief function receives a message from a connection-mode socket
//!
//! @sa recvfrom
//!
//! @Note On this version, only blocking mode is supported.
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(recv)(INT32 sd, void *buf, INT32 len, INT32 flags);
//*****************************************************************************
//
//! recvfrom
//!
//! @param[in] sd socket handle
//! @param[out] buf Points to the buffer where the message should be stored
//! @param[in] len Specifies the length in bytes of the buffer pointed to
//! by the buffer argument.
//! @param[in] flags Specifies the type of message reception.
//! On this version, this parameter is not supported.
//! @param[in] from pointer to an address structure indicating the source
//! address: sockaddr. On this version only AF_INET is
//! supported.
//! @param[in] fromlen source address structure size
//!
//! @return Return the number of bytes received, or -1 if an error
//! occurred
//!
//! @brief read data from socket
//! function receives a message from a connection-mode or
//! connectionless-mode socket. Note that raw sockets are not
//! supported.
//!
//! @sa recv
//!
//! @Note On this version, only blocking mode is supported.
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(recvfrom)(INT32 sd, void *buf, INT32 len, INT32 flags, sockaddr *from,
socklen_t *fromlen);
//*****************************************************************************
//
//! send
//!
//! @param sd socket handle
//! @param buf Points to a buffer containing the message to be sent
//! @param len message size in bytes
//! @param flags On this version, this parameter is not supported
//!
//! @return Return the number of bytes transmitted, or -1 if an
//! error occurred
//!
//! @brief Write data to TCP socket
//! This function is used to transmit a message to another
//! socket.
//!
//! @Note On this version, only blocking mode is supported.
//!
//! @sa sendto
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(send)(INT32 sd, const void *buf, INT32 len, INT32 flags);
//*****************************************************************************
//
//! sendto
//!
//! @param sd socket handle
//! @param buf Points to a buffer containing the message to be sent
//! @param len message size in bytes
//! @param flags On this version, this parameter is not supported
//! @param to pointer to an address structure indicating the destination
//! address: sockaddr. On this version only AF_INET is
//! supported.
//! @param tolen destination address structure size
//!
//! @return Return the number of bytes transmitted, or -1 if an
//! error occurred
//!
//! @brief Write data to TCP socket
//! This function is used to transmit a message to another
//! socket.
//!
//! @Note On this version, only blocking mode is supported.
//!
//! @sa send
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(sendto)(INT32 sd, const void *buf, INT32 len, INT32 flags,
const sockaddr *to, socklen_t tolen);
//*****************************************************************************
//
//! mdnsAdvertiser
//!
//! @param[in] mdnsEnabled flag to enable/disable the mDNS feature
//! @param[in] deviceServiceName Service name as part of the published
//! canonical domain name
//! @param[in] deviceServiceNameLength Length of the service name - up to 32 chars
//!
//!
//! @return On success, zero is returned, return SOC_ERROR if socket was not
//! opened successfully, or if an error occurred.
//!
//! @brief Set CC3000 in mDNS advertiser mode in order to advertise itself.
//
//*****************************************************************************
extern INT16 CC3000_EXPORT(mdnsAdvertiser)(UINT16 mdnsEnabled, CHAR * deviceServiceName, UINT16 deviceServiceNameLength);
//*****************************************************************************
//
//! getmssvalue
//!
//! @param[in] sd socket descriptor
//!
//! @return On success, returns the MSS value of a TCP connection
//!
//! @brief Returns the MSS value of a TCP connection according to the socket descriptor
//
//*****************************************************************************
extern UINT16 CC3000_EXPORT(getmssvalue) (INT32 sd);
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __SOCKET_H__

518
components/language/micropython/drivers/cc3000/inc/wlan.h Normal file
View File

@@ -0,0 +1,518 @@
/*****************************************************************************
*
* wlan.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __CC3000_WLAN_H__
#define __CC3000_WLAN_H__
#include "cc3000_common.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
#define WLAN_SEC_UNSEC (0)
#define WLAN_SEC_WEP (1)
#define WLAN_SEC_WPA (2)
#define WLAN_SEC_WPA2 (3)
//*****************************************************************************
//
//! \addtogroup wlan_api
//! @{
//
//*****************************************************************************
//*****************************************************************************
//
//! wlan_init
//!
//! @param sWlanCB Asynchronous events callback.
//! 0 no event call back.
//! -call back parameters:
//! 1) event_type: HCI_EVNT_WLAN_UNSOL_CONNECT connect event,
//! HCI_EVNT_WLAN_UNSOL_DISCONNECT disconnect event,
//! HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE config done,
//! HCI_EVNT_WLAN_UNSOL_DHCP dhcp report,
//! HCI_EVNT_WLAN_ASYNC_PING_REPORT ping report OR
//! HCI_EVNT_WLAN_KEEPALIVE keepalive.
//! 2) data: pointer to extra data that received by the event
//! (NULL no data).
//! 3) length: data length.
//! -Events with extra data:
//! HCI_EVNT_WLAN_UNSOL_DHCP: 4 bytes IP, 4 bytes Mask,
//! 4 bytes default gateway, 4 bytes DHCP server and 4 bytes
//! for DNS server.
//! HCI_EVNT_WLAN_ASYNC_PING_REPORT: 4 bytes Packets sent,
//! 4 bytes Packets received, 4 bytes Min round time,
//! 4 bytes Max round time and 4 bytes for Avg round time.
//!
//! @param sFWPatches 0 no patch or pointer to FW patches
//! @param sDriverPatches 0 no patch or pointer to driver patches
//! @param sBootLoaderPatches 0 no patch or pointer to bootloader patches
//! @param sReadWlanInterruptPin init callback. the callback read wlan
//! interrupt status.
//! @param sWlanInterruptEnable init callback. the callback enable wlan
//! interrupt.
//! @param sWlanInterruptDisable init callback. the callback disable wlan
//! interrupt.
//! @param sWriteWlanPin init callback. the callback write value
//! to device pin.
//!
//! @return none
//!
//! @sa wlan_set_event_mask , wlan_start , wlan_stop
//!
//! @brief Initialize wlan driver
//!
//! @warning This function must be called before ANY other wlan driver function
//
//*****************************************************************************
extern void wlan_init( tWlanCB sWlanCB,
tFWPatches sFWPatches,
tDriverPatches sDriverPatches,
tBootLoaderPatches sBootLoaderPatches,
tWlanReadInteruptPin sReadWlanInterruptPin,
tWlanInterruptEnable sWlanInterruptEnable,
tWlanInterruptDisable sWlanInterruptDisable,
tWriteWlanPin sWriteWlanPin);
//*****************************************************************************
//
//! wlan_start
//!
//! @param usPatchesAvailableAtHost - flag to indicate if patches available
//! from host or from EEPROM. Due to the
//! fact the patches are burn to the EEPROM
//! using the patch programmer utility, the
//! patches will be available from the EEPROM
//! and not from the host.
//!
//! @return none
//!
//! @brief Start WLAN device. This function asserts the enable pin of
//! the device (WLAN_EN), starting the HW initialization process.
//! The function blocked until device Initialization is completed.
//! Function also configure patches (FW, driver or bootloader)
//! and calls appropriate device callbacks.
//!
//! @Note Prior calling the function wlan_init shall be called.
//! @Warning This function must be called after wlan_init and before any
//! other wlan API
//! @sa wlan_init , wlan_stop
//!
//
//*****************************************************************************
extern int wlan_start(UINT16 usPatchesAvailableAtHost);
//*****************************************************************************
//
//! wlan_stop
//!
//! @param none
//!
//! @return none
//!
//! @brief Stop WLAN device by putting it into reset state.
//!
//! @sa wlan_start
//
//*****************************************************************************
extern void wlan_stop(void);
//*****************************************************************************
//
//! wlan_connect
//!
//! @param sec_type security options:
//! WLAN_SEC_UNSEC,
//! WLAN_SEC_WEP (ASCII support only),
//! WLAN_SEC_WPA or WLAN_SEC_WPA2
//! @param ssid up to 32 bytes and is ASCII SSID of the AP
//! @param ssid_len length of the SSID
//! @param bssid 6 bytes specified the AP bssid
//! @param key up to 32 bytes specified the AP security key
//! @param key_len key length
//!
//! @return On success, zero is returned. On error, negative is returned.
//! Note that even though a zero is returned on success to trigger
//! connection operation, it does not mean that CCC3000 is already
//! connected. An asynchronous "Connected" event is generated when
//! actual association process finishes and CC3000 is connected to
//! the AP. If DHCP is set, An asynchronous "DHCP" event is
//! generated when DHCP process is finish.
//!
//!
//! @brief Connect to AP
//! @warning Please Note that when connection to AP configured with security
//! type WEP, please confirm that the key is set as ASCII and not
//! as HEX.
//! @sa wlan_disconnect
//
//*****************************************************************************
#ifndef CC3000_TINY_DRIVER
extern INT32 wlan_connect(UINT32 ulSecType, CHAR *ssid, INT32 ssid_len,
UINT8 *bssid, UINT8 *key, INT32 key_len);
#else
extern INT32 wlan_connect(CHAR *ssid, INT32 ssid_len);
#endif
//*****************************************************************************
//
//! wlan_disconnect
//!
//! @return 0 disconnected done, other CC3000 already disconnected
//!
//! @brief Disconnect connection from AP.
//!
//! @sa wlan_connect
//
//*****************************************************************************
extern INT32 wlan_disconnect(void);
//*****************************************************************************
//
//! wlan_add_profile
//!
//! @param ulSecType WLAN_SEC_UNSEC,WLAN_SEC_WEP,WLAN_SEC_WPA,WLAN_SEC_WPA2
//! @param ucSsid ssid SSID up to 32 bytes
//! @param ulSsidLen ssid length
//! @param ucBssid bssid 6 bytes
//! @param ulPriority ulPriority profile priority. Lowest priority:0.
//! @param ulPairwiseCipher_Or_TxKeyLen key length for WEP security
//! @param ulGroupCipher_TxKeyIndex key index
//! @param ulKeyMgmt KEY management
//! @param ucPf_OrKey security key
//! @param ulPassPhraseLen security key length for WPA\WPA2
//!
//! @return On success, index (1-7) of the stored profile is returned.
//! On error, -1 is returned.
//!
//! @brief When auto start is enabled, the device connects to
//! station from the profiles table. Up to 7 profiles are supported.
//! If several profiles configured the device choose the highest
//! priority profile, within each priority group, device will choose
//! profile based on security policy, signal strength, etc
//! parameters. All the profiles are stored in CC3000 NVMEM.
//!
//! @sa wlan_ioctl_del_profile
//
//*****************************************************************************
extern INT32 wlan_add_profile(UINT32 ulSecType, UINT8* ucSsid,
UINT32 ulSsidLen,
UINT8 *ucBssid,
UINT32 ulPriority,
UINT32 ulPairwiseCipher_Or_Key,
UINT32 ulGroupCipher_TxKeyLen,
UINT32 ulKeyMgmt,
UINT8* ucPf_OrKey,
UINT32 ulPassPhraseLen);
//*****************************************************************************
//
//! wlan_ioctl_del_profile
//!
//! @param index number of profile to delete
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Delete WLAN profile
//!
//! @Note In order to delete all stored profile, set index to 255.
//!
//! @sa wlan_add_profile
//
//*****************************************************************************
extern INT32 wlan_ioctl_del_profile(UINT32 ulIndex);
//*****************************************************************************
//
//! wlan_set_event_mask
//!
//! @param mask mask option:
//! HCI_EVNT_WLAN_UNSOL_CONNECT connect event
//! HCI_EVNT_WLAN_UNSOL_DISCONNECT disconnect event
//! HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE smart config done
//! HCI_EVNT_WLAN_UNSOL_INIT init done
//! HCI_EVNT_WLAN_UNSOL_DHCP dhcp event report
//! HCI_EVNT_WLAN_ASYNC_PING_REPORT ping report
//! HCI_EVNT_WLAN_KEEPALIVE keepalive
//! HCI_EVNT_WLAN_TX_COMPLETE - disable information on end of transmission
//! Saved: no.
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Mask event according to bit mask. In case that event is
//! masked (1), the device will not send the masked event to host.
//
//*****************************************************************************
extern INT32 wlan_set_event_mask(UINT32 ulMask);
//*****************************************************************************
//
//! wlan_ioctl_statusget
//!
//! @param none
//!
//! @return WLAN_STATUS_DISCONNECTED, WLAN_STATUS_SCANING,
//! STATUS_CONNECTING or WLAN_STATUS_CONNECTED
//!
//! @brief get wlan status: disconnected, scanning, connecting or connected
//
//*****************************************************************************
extern INT32 wlan_ioctl_statusget(void);
//*****************************************************************************
//
//! wlan_ioctl_set_connection_policy
//!
//! @param should_connect_to_open_ap enable(1), disable(0) connect to any
//! available AP. This parameter corresponds to the configuration of
//! item # 3 in the brief description.
//! @param should_use_fast_connect enable(1), disable(0). if enabled, tries
//! to connect to the last connected AP. This parameter corresponds
//! to the configuration of item # 1 in the brief description.
//! @param auto_start enable(1), disable(0) auto connect
//! after reset and periodically reconnect if needed. This
//! configuration configures option 2 in the above description.
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief When auto is enabled, the device tries to connect according
//! the following policy:
//! 1) If fast connect is enabled and last connection is valid,
//! the device will try to connect to it without the scanning
//! procedure (fast). The last connection will be marked as
//! invalid, due to adding/removing profile.
//! 2) If profile exists, the device will try to connect it
//! (Up to seven profiles).
//! 3) If fast and profiles are not found, and open mode is
//! enabled, the device will try to connect to any AP.
//! * Note that the policy settings are stored in the CC3000 NVMEM.
//!
//! @sa wlan_add_profile , wlan_ioctl_del_profile
//
//*****************************************************************************
extern INT32 wlan_ioctl_set_connection_policy(
UINT32 should_connect_to_open_ap,
UINT32 should_use_fast_connect,
UINT32 ulUseProfiles);
//*****************************************************************************
//
//! wlan_ioctl_get_scan_results
//!
//! @param[in] scan_timeout parameter not supported
//! @param[out] ucResults scan result (_wlan_full_scan_results_args_t)
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Gets entry from scan result table.
//! The scan results are returned one by one, and each entry
//! represents a single AP found in the area. The following is a
//! format of the scan result:
//! - 4 Bytes: number of networks found
//! - 4 Bytes: The status of the scan: 0 - aged results,
//! 1 - results valid, 2 - no results
//! - 42 bytes: Result entry, where the bytes are arranged as follows:
//!
//! - 1 bit isValid - is result valid or not
//! - 7 bits rssi - RSSI value;
//! - 2 bits: securityMode - security mode of the AP:
//! 0 - Open, 1 - WEP, 2 WPA, 3 WPA2
//! - 6 bits: SSID name length
//! - 2 bytes: the time at which the entry has entered into
//! scans result table
//! - 32 bytes: SSID name
//! - 6 bytes: BSSID
//!
//! @Note scan_timeout, is not supported on this version.
//!
//! @sa wlan_ioctl_set_scan_params
//
//*****************************************************************************
extern INT32 wlan_ioctl_get_scan_results(UINT32 ulScanTimeout,
UINT8 *ucResults);
//*****************************************************************************
//
//! wlan_ioctl_set_scan_params
//!
//! @param uiEnable - start/stop application scan:
//! 1 = start scan with default interval value of 10 min.
//! in order to set a different scan interval value apply the value
//! in milliseconds. minimum 1 second. 0=stop). Wlan reset
//! (wlan_stop() wlan_start()) is needed when changing scan interval
//! value. Saved: No
//! @param uiMinDwellTime minimum dwell time value to be used for each
//! channel, in milliseconds. Saved: yes
//! Recommended Value: 100 (Default: 20)
//! @param uiMaxDwellTime maximum dwell time value to be used for each
//! channel, in milliseconds. Saved: yes
//! Recommended Value: 100 (Default: 30)
//! @param uiNumOfProbeRequests max probe request between dwell time.
//! Saved: yes. Recommended Value: 5 (Default:2)
//! @param uiChannelMask bitwise, up to 13 channels (0x1fff).
//! Saved: yes. Default: 0x7ff
//! @param uiRSSIThreshold RSSI threshold. Saved: yes (Default: -80)
//! @param uiSNRThreshold NSR threshold. Saved: yes (Default: 0)
//! @param uiDefaultTxPower probe Tx power. Saved: yes (Default: 205)
//! @param aiIntervalList pointer to array with 16 entries (16 channels)
//! each entry (UINT32) holds timeout between periodic scan
//! (connection scan) - in milliseconds. Saved: yes. Default 2000ms.
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief start and stop scan procedure. Set scan parameters.
//!
//! @Note uiDefaultTxPower, is not supported on this version.
//!
//! @sa wlan_ioctl_get_scan_results
//
//*****************************************************************************
extern INT32 wlan_ioctl_set_scan_params(UINT32 uiEnable, UINT32
uiMinDwellTime,UINT32 uiMaxDwellTime,
UINT32 uiNumOfProbeRequests,
UINT32 uiChannelMask,
INT32 iRSSIThreshold,UINT32 uiSNRThreshold,
UINT32 uiDefaultTxPower,
UINT32 *aiIntervalList);
//*****************************************************************************
//
//! wlan_smart_config_start
//!
//! @param algoEncryptedFlag indicates whether the information is encrypted
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Start to acquire device profile. The device acquire its own
//! profile, if profile message is found. The acquired AP information
//! is stored in CC3000 EEPROM only in case AES128 encryption is used.
//! In case AES128 encryption is not used, a profile is created by
//! CC3000 internally.
//!
//! @Note An asynchronous event - Smart Config Done will be generated as soon
//! as the process finishes successfully.
//!
//! @sa wlan_smart_config_set_prefix , wlan_smart_config_stop
//
//*****************************************************************************
extern INT32 wlan_smart_config_start(UINT32 algoEncryptedFlag);
//*****************************************************************************
//
//! wlan_smart_config_stop
//!
//! @param algoEncryptedFlag indicates whether the information is encrypted
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Stop the acquire profile procedure
//!
//! @sa wlan_smart_config_start , wlan_smart_config_set_prefix
//
//*****************************************************************************
extern INT32 wlan_smart_config_stop(void);
//*****************************************************************************
//
//! wlan_smart_config_set_prefix
//!
//! @param newPrefix 3 bytes identify the SSID prefix for the Smart Config.
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief Configure station ssid prefix. The prefix is used internally
//! in CC3000. It should always be TTT.
//!
//! @Note The prefix is stored in CC3000 NVMEM
//!
//! @sa wlan_smart_config_start , wlan_smart_config_stop
//
//*****************************************************************************
extern INT32 wlan_smart_config_set_prefix(CHAR* cNewPrefix);
//*****************************************************************************
//
//! wlan_smart_config_process
//!
//! @param none
//!
//! @return On success, zero is returned. On error, -1 is returned
//!
//! @brief process the acquired data and store it as a profile. The acquired
//! AP information is stored in CC3000 EEPROM encrypted.
//! The encrypted data is decrypted and stored as a profile.
//! behavior is as defined by connection policy.
//
//*****************************************************************************
extern INT32 wlan_smart_config_process(void);
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __CC3000_WLAN_H__