micropython: add micropython component

components/language/micropython/examples/hwapi/README.md

@@ -0,0 +1,126 @@
+This directory shows the best practices for using MicroPython hardware API
+(`machine` module). `machine` module strives to provide consistent API
+across various boards, with the aim to enable writing portable applications,
+which would work from a board to board, from a system to another systems.
+This is inherently a hard problem, because hardware is different from one
+board type to another, and even from examplar of board to another. For
+example, if your app requires an external LED, one user may connect it
+to one GPIO pin, while another user may find it much more convinient to
+use another pin. This of course applies to relays, buzzers, sensors, etc.
+
+With complications above in mind, it's still possible to write portable
+applications by using "low[est] denominator" subset of hardware API and
+following simple rules outlined below. The applications won't be able
+to rely on advanced hardware capabilities of a particular board and
+will be limited to generic capabilities, but it's still possible to
+write many useful applications in such a way, with the obvious benefit of
+"write once - run everywhere" approach (only configuration for a particular
+board is required).
+
+The key to this approach is splitting your application into (at least)
+2 parts:
+
+* main application logic
+* hardware configuration
+
+The key point is that hardware configuration should be a separate file
+(module in Python terms). A good name would be `hwconfig.py`, and that's
+how we'll call it from now on. Another key point is that main application
+should never instantiate (construct) hardware objects directly. Instead,
+they should be defined in `hwconfig.py`, and main application should
+import and reference hardware objects via this module. The simplest
+application of this idea would look like:
+
+`hwconfig.py`:
+
+    from machine import Pin
+
+    LED = Pin("A3", Pin.OUT)
+
+`app.py`:
+
+    from hwconfig import *
+    import utime
+
+    while True:
+        LED.value(1)
+        utime.sleep_ms(500)
+        LED.value(0)
+        utime.sleep_ms(500)
+
+
+To deploy this application to a particular board, a user will need:
+
+1. Edit `hwconfig.py` to adjust Pin and other hardware peripheral
+   parameters and locations.
+2. Actually deploy `hwconfig.py` and `app.py` to a board (e.g. copy to
+   board's filesystem, or build new firmware with these modules frozen
+   into it).
+
+Note that there's no need to edit the main application code! (Which may
+be complex, while `hwconfig.py` should usually remain short enough, and
+focused solely on hardware configuration).
+
+An obvious improvement to this approach is the following. There're few
+well-known boards which run MicroPython, and most of them include an
+onboard LED. So, to help users of these boards to do configuration
+quickly (that's especially important for novice users, for who may
+be stumped by the need to reach out to a board reference to find LED
+pin assignments), `hwconfig.py` your application ships may include
+commented out sections with working configurations for different
+boards. The step 1 above then will be:
+
+1. Look thru `hwconfig.py` to find a section which either exactly
+   matches your board, or the closest to it. Uncomment, and if any
+   adjustments required, apply them.
+
+It's important to keep in mind that adjustments may be always required,
+and that there may be users whose configuration doesn't match any of
+the available. So, always include a section or instructions for them.
+Consider for example that even on a supported board, user may want to
+blink not an on-board LED, but the one they connected externally.
+MicroPython's Hardware API offers portability not just among "supported"
+boards, but to any board at all, so make sure users can enjoy it.
+
+There's next step of improvement to make. While having one `hwconfig.py`
+with many sections would work for smaller projects with few hardware
+objects, it may become more cumbersome to maintain both on programmer's
+and user's sides for larger projects. Then instead of single
+`hwconfig.py` file, you can provide few "template" ones for well-known
+boards:
+
+* `hwconfig_pyboard.py`
+* `hwconfig_wipy.py`
+* `hwconfig_esp8266.py`
+* etc.
+
+Then step 1 above will be:
+
+1. Look thru available `hwconfig_*.py` files and find one which matches
+   your board the best, then rename to `hwconfig.py` and make adjustments,
+   if any.
+
+Again, please keep in mind that there may be users whose hardware will be
+completely unlike you heard of. Give them some helpful hints too, perhaps
+provide `hwconfig_custom.py` with some instructions.
+
+That's where we stop with improvements to the "separate file for hardware
+configuration" idea, as it is already pretty flexible and viable. An
+application in this directory shows it in practice, using slightly less
+trivial example than just a blinking LED: `soft_pwm.py` implements a
+software PWM (pulse width modulation) to produce an LED fade-in/fade-out
+effect - without any dependence on hardware PWM availability.
+
+Note that improvements to board configuration handling may continue further.
+For example, one may invent a "configuration manager" helper module which will
+try to detect current board (among well-known ones), and load appropriate
+`hwconfig_*.py` - this assumes that a user would lazily deploy them all
+(or that application will be automatically installed, e.g. using MicroPython's
+`upip` package manager). The key point in this case remains the same as
+elaborated above - always assume there can, and will be a custom configuration,
+and it should be well supported. So, any automatic detection should be
+overridable by a user, and instructions how to do so are among the most
+important you may provide for your application.
+
+By following these best practices, you will use MicroPython at its full
+potential, and let users enjoy it too. Good luck!