micropython: add micropython component

components/language/micropython/extmod/webrepl/manifest.py

@@ -0,0 +1 @@
+freeze(".", ("webrepl.py", "webrepl_setup.py", "websocket_helper.py"))

components/language/micropython/extmod/webrepl/webrepl.py

@@ -0,0 +1,86 @@
+# This module should be imported from REPL, not run from command line.
+import socket
+import uos
+import network
+import uwebsocket
+import websocket_helper
+import _webrepl
+
+listen_s = None
+client_s = None
+
+
+def setup_conn(port, accept_handler):
+    global listen_s
+    listen_s = socket.socket()
+    listen_s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+
+    ai = socket.getaddrinfo("0.0.0.0", port)
+    addr = ai[0][4]
+
+    listen_s.bind(addr)
+    listen_s.listen(1)
+    if accept_handler:
+        listen_s.setsockopt(socket.SOL_SOCKET, 20, accept_handler)
+    for i in (network.AP_IF, network.STA_IF):
+        iface = network.WLAN(i)
+        if iface.active():
+            print("WebREPL daemon started on ws://%s:%d" % (iface.ifconfig()[0], port))
+    return listen_s
+
+
+def accept_conn(listen_sock):
+    global client_s
+    cl, remote_addr = listen_sock.accept()
+    prev = uos.dupterm(None)
+    uos.dupterm(prev)
+    if prev:
+        print("\nConcurrent WebREPL connection from", remote_addr, "rejected")
+        cl.close()
+        return
+    print("\nWebREPL connection from:", remote_addr)
+    client_s = cl
+    websocket_helper.server_handshake(cl)
+    ws = uwebsocket.websocket(cl, True)
+    ws = _webrepl._webrepl(ws)
+    cl.setblocking(False)
+    # notify REPL on socket incoming data (ESP32/ESP8266-only)
+    if hasattr(uos, "dupterm_notify"):
+        cl.setsockopt(socket.SOL_SOCKET, 20, uos.dupterm_notify)
+    uos.dupterm(ws)
+
+
+def stop():
+    global listen_s, client_s
+    uos.dupterm(None)
+    if client_s:
+        client_s.close()
+    if listen_s:
+        listen_s.close()
+
+
+def start(port=8266, password=None, accept_handler=accept_conn):
+    stop()
+    webrepl_pass = password
+    if webrepl_pass is None:
+        try:
+            import webrepl_cfg
+
+            webrepl_pass = webrepl_cfg.PASS
+        except:
+            print("WebREPL is not configured, run 'import webrepl_setup'")
+
+    _webrepl.password(webrepl_pass)
+    s = setup_conn(port, accept_handler)
+
+    if accept_handler is None:
+        print("Starting webrepl in foreground mode")
+        accept_conn(s)
+    elif password is None:
+        print("Started webrepl in normal mode")
+    else:
+        print("Started webrepl in manual override mode")
+
+
+def start_foreground(port=8266, password=None):
+    start(port, password, None)

components/language/micropython/extmod/webrepl/webrepl_setup.py

@@ -0,0 +1,108 @@
+import sys
+
+# import uos as os
+import os
+import machine
+
+RC = "./boot.py"
+CONFIG = "./webrepl_cfg.py"
+
+
+def input_choice(prompt, choices):
+    while 1:
+        resp = input(prompt)
+        if resp in choices:
+            return resp
+
+
+def getpass(prompt):
+    return input(prompt)
+
+
+def input_pass():
+    while 1:
+        passwd1 = getpass("New password (4-9 chars): ")
+        if len(passwd1) < 4 or len(passwd1) > 9:
+            print("Invalid password length")
+            continue
+        passwd2 = getpass("Confirm password: ")
+        if passwd1 == passwd2:
+            return passwd1
+        print("Passwords do not match")
+
+
+def exists(fname):
+    try:
+        with open(fname):
+            pass
+        return True
+    except OSError:
+        return False
+
+
+def get_daemon_status():
+    with open(RC) as f:
+        for l in f:
+            if "webrepl" in l:
+                if l.startswith("#"):
+                    return False
+                return True
+        return None
+
+
+def change_daemon(action):
+    LINES = ("import webrepl", "webrepl.start()")
+    with open(RC) as old_f, open(RC + ".tmp", "w") as new_f:
+        found = False
+        for l in old_f:
+            for patt in LINES:
+                if patt in l:
+                    found = True
+                    if action and l.startswith("#"):
+                        l = l[1:]
+                    elif not action and not l.startswith("#"):
+                        l = "#" + l
+            new_f.write(l)
+        if not found:
+            new_f.write("import webrepl\nwebrepl.start()\n")
+    # FatFs rename() is not POSIX compliant, will raise OSError if
+    # dest file exists.
+    os.remove(RC)
+    os.rename(RC + ".tmp", RC)
+
+
+def main():
+    status = get_daemon_status()
+
+    print("WebREPL daemon auto-start status:", "enabled" if status else "disabled")
+    print("\nWould you like to (E)nable or (D)isable it running on boot?")
+    print("(Empty line to quit)")
+    resp = input("> ").upper()
+
+    if resp == "E":
+        if exists(CONFIG):
+            resp2 = input_choice(
+                "Would you like to change WebREPL password? (y/n) ", ("y", "n", "")
+            )
+        else:
+            print("To enable WebREPL, you must set password for it")
+            resp2 = "y"
+
+        if resp2 == "y":
+            passwd = input_pass()
+            with open(CONFIG, "w") as f:
+                f.write("PASS = %r\n" % passwd)
+
+    if resp not in ("D", "E") or (resp == "D" and not status) or (resp == "E" and status):
+        print("No further action required")
+        sys.exit()
+
+    change_daemon(resp == "E")
+
+    print("Changes will be activated after reboot")
+    resp = input_choice("Would you like to reboot now? (y/n) ", ("y", "n", ""))
+    if resp == "y":
+        machine.reset()
+
+
+main()

components/language/micropython/extmod/webrepl/websocket_helper.py

@@ -0,0 +1,85 @@
+try:
+    import usys as sys
+except ImportError:
+    import sys
+
+try:
+    import ubinascii as binascii
+except:
+    import binascii
+try:
+    import uhashlib as hashlib
+except:
+    import hashlib
+
+DEBUG = 0
+
+
+def server_handshake(sock):
+    clr = sock.makefile("rwb", 0)
+    l = clr.readline()
+    # sys.stdout.write(repr(l))
+
+    webkey = None
+
+    while 1:
+        l = clr.readline()
+        if not l:
+            raise OSError("EOF in headers")
+        if l == b"\r\n":
+            break
+        #    sys.stdout.write(l)
+        h, v = [x.strip() for x in l.split(b":", 1)]
+        if DEBUG:
+            print((h, v))
+        if h == b"Sec-WebSocket-Key":
+            webkey = v
+
+    if not webkey:
+        raise OSError("Not a websocket request")
+
+    if DEBUG:
+        print("Sec-WebSocket-Key:", webkey, len(webkey))
+
+    d = hashlib.sha1(webkey)
+    d.update(b"258EAFA5-E914-47DA-95CA-C5AB0DC85B11")
+    respkey = d.digest()
+    respkey = binascii.b2a_base64(respkey)[:-1]
+    if DEBUG:
+        print("respkey:", respkey)
+
+    sock.send(
+        b"""\
+HTTP/1.1 101 Switching Protocols\r
+Upgrade: websocket\r
+Connection: Upgrade\r
+Sec-WebSocket-Accept: """
+    )
+    sock.send(respkey)
+    sock.send("\r\n\r\n")
+
+
+# Very simplified client handshake, works for MicroPython's
+# websocket server implementation, but probably not for other
+# servers.
+def client_handshake(sock):
+    cl = sock.makefile("rwb", 0)
+    cl.write(
+        b"""\
+GET / HTTP/1.1\r
+Host: echo.websocket.org\r
+Connection: Upgrade\r
+Upgrade: websocket\r
+Sec-WebSocket-Key: foo\r
+\r
+"""
+    )
+    l = cl.readline()
+    #    print(l)
+    while 1:
+        l = cl.readline()
+        if l == b"\r\n":
+            break
+
+
+#        sys.stdout.write(l)