micropython: add micropython component
This commit is contained in:
KY-zhang-X
164
components/language/micropython/tests/wipy/uart.py
Normal file
164
components/language/micropython/tests/wipy/uart.py
Normal file
@@ -0,0 +1,164 @@
|
||||
"""
|
||||
UART test for the CC3200 based boards.
|
||||
UART0 and UART1 must be connected together for this test to pass.
|
||||
"""
|
||||
|
||||
from machine import UART
|
||||
from machine import Pin
|
||||
import os
|
||||
import time
|
||||
|
||||
mch = os.uname().machine
|
||||
if "LaunchPad" in mch:
|
||||
uart_id_range = range(0, 2)
|
||||
uart_pins = [
|
||||
[("GP12", "GP13"), ("GP12", "GP13", "GP7", "GP6")],
|
||||
[("GP16", "GP17"), ("GP16", "GP17", "GP7", "GP6")],
|
||||
]
|
||||
elif "WiPy" in mch:
|
||||
uart_id_range = range(0, 2)
|
||||
uart_pins = [
|
||||
[("GP12", "GP13"), ("GP12", "GP13", "GP7", "GP6")],
|
||||
[("GP16", "GP17"), ("GP16", "GP17", "GP7", "GP6")],
|
||||
]
|
||||
else:
|
||||
raise Exception("Board not supported!")
|
||||
|
||||
# just in case we have the repl duplicated on any of the uarts
|
||||
os.dupterm(None)
|
||||
|
||||
for uart_id in uart_id_range:
|
||||
uart = UART(uart_id, 38400)
|
||||
print(uart)
|
||||
uart.init(57600, 8, None, 1, pins=uart_pins[uart_id][0])
|
||||
uart.init(baudrate=9600, stop=2, parity=UART.EVEN, pins=uart_pins[uart_id][1])
|
||||
uart.init(baudrate=115200, parity=UART.ODD, stop=0, pins=uart_pins[uart_id][0])
|
||||
uart = UART(baudrate=1000000)
|
||||
uart.sendbreak()
|
||||
|
||||
uart = UART(baudrate=1000000)
|
||||
uart = UART()
|
||||
print(uart)
|
||||
uart = UART(baudrate=38400, pins=("GP12", "GP13"))
|
||||
print(uart)
|
||||
uart = UART(pins=("GP12", "GP13"))
|
||||
print(uart)
|
||||
uart = UART(pins=(None, "GP17"))
|
||||
print(uart)
|
||||
uart = UART(baudrate=57600, pins=("GP16", "GP17"))
|
||||
print(uart)
|
||||
|
||||
# now it's time for some loopback tests between the uarts
|
||||
uart0 = UART(0, 1000000, pins=uart_pins[0][0])
|
||||
print(uart0)
|
||||
uart1 = UART(1, 1000000, pins=uart_pins[1][0])
|
||||
print(uart1)
|
||||
|
||||
print(uart0.write(b"123456") == 6)
|
||||
print(uart1.read() == b"123456")
|
||||
|
||||
print(uart1.write(b"123") == 3)
|
||||
print(uart0.read(1) == b"1")
|
||||
print(uart0.read(2) == b"23")
|
||||
print(uart0.read() == None)
|
||||
|
||||
uart0.write(b"123")
|
||||
buf = bytearray(3)
|
||||
print(uart1.readinto(buf, 1) == 1)
|
||||
print(buf)
|
||||
print(uart1.readinto(buf) == 2)
|
||||
print(buf)
|
||||
|
||||
# try initializing without the id
|
||||
uart0 = UART(baudrate=1000000, pins=uart_pins[0][0])
|
||||
uart0.write(b"1234567890")
|
||||
time.sleep_ms(2) # because of the fifo interrupt levels
|
||||
print(uart1.any() == 10)
|
||||
print(uart1.readline() == b"1234567890")
|
||||
print(uart1.any() == 0)
|
||||
|
||||
uart0.write(b"1234567890")
|
||||
print(uart1.read() == b"1234567890")
|
||||
|
||||
# tx only mode
|
||||
uart0 = UART(0, 1000000, pins=("GP12", None))
|
||||
print(uart0.write(b"123456") == 6)
|
||||
print(uart1.read() == b"123456")
|
||||
print(uart1.write(b"123") == 3)
|
||||
print(uart0.read() == None)
|
||||
|
||||
# rx only mode
|
||||
uart0 = UART(0, 1000000, pins=(None, "GP13"))
|
||||
print(uart0.write(b"123456") == 6)
|
||||
print(uart1.read() == None)
|
||||
print(uart1.write(b"123") == 3)
|
||||
print(uart0.read() == b"123")
|
||||
|
||||
# leave pins as they were (rx only mode)
|
||||
uart0 = UART(0, 1000000, pins=None)
|
||||
print(uart0.write(b"123456") == 6)
|
||||
print(uart1.read() == None)
|
||||
print(uart1.write(b"123") == 3)
|
||||
print(uart0.read() == b"123")
|
||||
|
||||
# no pin assignment
|
||||
uart0 = UART(0, 1000000, pins=(None, None))
|
||||
print(uart0.write(b"123456789") == 9)
|
||||
print(uart1.read() == None)
|
||||
print(uart1.write(b"123456789") == 9)
|
||||
print(uart0.read() == None)
|
||||
print(Pin.board.GP12)
|
||||
print(Pin.board.GP13)
|
||||
|
||||
# check for memory leaks...
|
||||
for i in range(0, 1000):
|
||||
uart0 = UART(0, 1000000)
|
||||
uart1 = UART(1, 1000000)
|
||||
|
||||
# next ones must raise
|
||||
try:
|
||||
UART(0, 9600, parity=None, pins=("GP12", "GP13", "GP7"))
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
try:
|
||||
UART(0, 9600, parity=UART.ODD, pins=("GP12", "GP7"))
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
uart0 = UART(0, 1000000)
|
||||
uart0.deinit()
|
||||
try:
|
||||
uart0.any()
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
try:
|
||||
uart0.read()
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
try:
|
||||
uart0.write("abc")
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
try:
|
||||
uart0.sendbreak("abc")
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
try:
|
||||
UART(2, 9600)
|
||||
except Exception:
|
||||
print("Exception")
|
||||
|
||||
for uart_id in uart_id_range:
|
||||
uart = UART(uart_id, 1000000)
|
||||
uart.deinit()
|
||||
# test printing an unitialized uart
|
||||
print(uart)
|
||||
# initialize it back and check that it works again
|
||||
uart.init(115200)
|
||||
print(uart)
|
||||
uart.read()
|
||||
Reference in New Issue
Block a user