add basic project for tos_evb_aiot

board/TencentOS_tiny_EVB_AIoT/TOS-CONFIG/tos_config.h

@@ -0,0 +1,57 @@
+#ifndef _TOS_CONFIG_H_
+#define  _TOS_CONFIG_H_
+
+#include "fsl_common.h"
+
+#define TOS_CFG_TASK_PRIO_MAX           10u
+
+#define TOS_CFG_ROUND_ROBIN_EN          0u
+
+#define TOS_CFG_OBJECT_VERIFY_EN           1u
+
+#define TOS_CFG_TASK_DYNAMIC_CREATE_EN  1u
+
+#define TOS_CFG_EVENT_EN                1u
+
+#define TOS_CFG_MMBLK_EN                1u
+
+#define TOS_CFG_MMHEAP_EN               1u
+
+#define TOS_CFG_MMHEAP_DEFAULT_POOL_EN  1u
+
+#define TOS_CFG_MMHEAP_DEFAULT_POOL_SIZE        0x8000
+
+#define TOS_CFG_MUTEX_EN                1u
+
+#define TOS_CFG_MESSAGE_QUEUE_EN        1u
+
+#define TOS_CFG_MAIL_QUEUE_EN           1u
+
+#define TOS_CFG_PRIORITY_MESSAGE_QUEUE_EN	1u
+
+#define TOS_CFG_PRIORITY_MAIL_QUEUE_EN	1u
+
+#define TOS_CFG_TIMER_EN                1u
+
+#define TOS_CFG_PWR_MGR_EN              0u
+
+#define TOS_CFG_TICKLESS_EN             0u
+
+#define TOS_CFG_SEM_EN                  1u
+
+#define TOS_CFG_BARRIER_EN              1u
+
+#define TOS_CFG_TASK_STACK_DRAUGHT_DEPTH_DETACT_EN      1u
+
+#define TOS_CFG_FAULT_BACKTRACE_EN      0u
+
+#define TOS_CFG_IDLE_TASK_STK_SIZE      128u
+
+#define TOS_CFG_CPU_TICK_PER_SECOND     1000u
+
+#define TOS_CFG_CPU_CLOCK               (SystemCoreClock)
+
+#define TOS_CFG_TIMER_AS_PROC           1u
+
+#endif
+

board/TencentOS_tiny_EVB_AIoT/hello_world/KEIL/MIMXRT1062xxxxx_flexspi_nor.scf

@@ -0,0 +1,111 @@
+#!armclang --target=arm-arm-none-eabi -mcpu=cortex-m7 -E -x c
+/*
+** ###################################################################
+**     Processors:          MIMXRT1062CVJ5A
+**                          MIMXRT1062CVL5A
+**                          MIMXRT1062DVJ6A
+**                          MIMXRT1062DVL6A
+**
+**     Compiler:            Keil ARM C/C++ Compiler
+**     Reference manual:    IMXRT1060RM Rev.1, 12/2018 | IMXRT1060SRM Rev.3
+**     Version:             rev. 0.1, 2017-01-10
+**     Build:               b191015
+**
+**     Abstract:
+**         Linker file for the Keil ARM C/C++ Compiler
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2019 NXP
+**     All rights reserved.
+**
+**     SPDX-License-Identifier: BSD-3-Clause
+**
+**     http:                 www.nxp.com
+**     mail:                 support@nxp.com
+**
+** ###################################################################
+*/
+
+#if (defined(__ram_vector_table__))
+  #define __ram_vector_table_size__    0x00000400
+#else
+  #define __ram_vector_table_size__    0x00000000
+#endif
+
+#define m_flash_config_start           0x60000000
+#define m_flash_config_size            0x00001000
+
+#define m_ivt_start                    0x60001000
+#define m_ivt_size                     0x00001000
+
+#define m_interrupts_start             0x60002000
+#define m_interrupts_size              0x00000400
+
+#define m_text_start                   0x60002400
+#define m_text_size                    0x007FDC00
+
+#define m_interrupts_ram_start         0x20000000
+#define m_interrupts_ram_size          __ram_vector_table_size__
+
+#define  m_data_start                  (m_interrupts_ram_start + m_interrupts_ram_size)
+#define  m_data_size                   (0x00020000 - m_interrupts_ram_size)
+
+#define m_data2_start                  0x20200000
+#define m_data2_size                   0x000C0000
+
+/* Sizes */
+#if (defined(__stack_size__))
+  #define Stack_Size                   __stack_size__
+#else
+  #define Stack_Size                   0x0400
+#endif
+
+#if (defined(__heap_size__))
+  #define Heap_Size                    __heap_size__
+#else
+  #define Heap_Size                    0x0400
+#endif
+
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+LR_m_text m_flash_config_start m_text_start+m_text_size-m_flash_config_start {   ; load region size_region
+  RW_m_config_text m_flash_config_start FIXED m_flash_config_size { ; load address = execution address
+    * (.boot_hdr.conf, +FIRST)
+  }
+
+  RW_m_ivt_text m_ivt_start FIXED m_ivt_size { ; load address = execution address
+    * (.boot_hdr.ivt, +FIRST)
+    * (.boot_hdr.boot_data)
+    * (.boot_hdr.dcd_data)
+  }
+#else
+LR_m_text m_interrupts_start m_text_start+m_text_size-m_interrupts_start {   ; load region size_region
+#endif
+  VECTOR_ROM m_interrupts_start FIXED m_interrupts_size { ; load address = execution address
+    * (.isr_vector,+FIRST)
+  }
+  ER_m_text m_text_start FIXED m_text_size { ; load address = execution address
+    * (InRoot$$Sections)
+    .ANY (+RO)
+  }
+#if (defined(__ram_vector_table__))
+  VECTOR_RAM m_interrupts_ram_start EMPTY m_interrupts_ram_size {
+  }
+#else
+  VECTOR_RAM m_interrupts_start EMPTY 0 {
+  }
+#endif
+  RW_m_data m_data_start m_data_size-Stack_Size-Heap_Size { ; RW data
+    .ANY (+RW +ZI)
+    * (RamFunction)
+    * (NonCacheable.init)
+    * (*NonCacheable)
+  }
+  ARM_LIB_HEAP +0 EMPTY Heap_Size {    ; Heap region growing up
+  }
+  ARM_LIB_STACK m_data_start+m_data_size EMPTY -Stack_Size { ; Stack region growing down
+  }
+  RW_m_ncache m_data2_start EMPTY 0 {
+  }
+  RW_m_ncache_unused +0 EMPTY m_data2_size-ImageLength(RW_m_ncache) { ; Empty region added for MPU configuration
+  }
+}

board/TencentOS_tiny_EVB_AIoT/hello_world/KEIL/MIMXRT1062xxxxx_ram.scf

@@ -0,0 +1,77 @@
+#!armclang --target=arm-arm-none-eabi -mcpu=cortex-m7 -E -x c
+/*
+** ###################################################################
+**     Processors:          MIMXRT1062CVJ5A
+**                          MIMXRT1062CVL5A
+**                          MIMXRT1062DVJ6A
+**                          MIMXRT1062DVL6A
+**
+**     Compiler:            Keil ARM C/C++ Compiler
+**     Reference manual:    IMXRT1060RM Rev.1, 12/2018 | IMXRT1060SRM Rev.3
+**     Version:             rev. 0.1, 2017-01-10
+**     Build:               b191015
+**
+**     Abstract:
+**         Linker file for the Keil ARM C/C++ Compiler
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2019 NXP
+**     All rights reserved.
+**
+**     SPDX-License-Identifier: BSD-3-Clause
+**
+**     http:                 www.nxp.com
+**     mail:                 support@nxp.com
+**
+** ###################################################################
+*/
+
+#define m_interrupts_start             0x00000000
+#define m_interrupts_size              0x00000400
+
+#define m_text_start                   0x00000400
+#define m_text_size                    0x0001FC00
+
+#define m_data_start                   0x20000000
+#define m_data_size                    0x00020000
+
+#define m_data2_start                  0x20200000
+#define m_data2_size                   0x000C0000
+
+/* Sizes */
+#if (defined(__stack_size__))
+  #define Stack_Size                   __stack_size__
+#else
+  #define Stack_Size                   0x0400
+#endif
+
+#if (defined(__heap_size__))
+  #define Heap_Size                    __heap_size__
+#else
+  #define Heap_Size                    0x0400
+#endif
+
+LR_m_text m_interrupts_start m_text_start+m_text_size-m_interrupts_start {   ; load region size_region
+  VECTOR_ROM m_interrupts_start FIXED m_interrupts_size { ; load address = execution address
+    * (.isr_vector,+FIRST)
+  }
+  ER_m_text m_text_start FIXED m_text_size { ; load address = execution address
+    * (InRoot$$Sections)
+    .ANY (+RO)
+  }
+  VECTOR_RAM m_interrupts_start EMPTY 0 {
+  }
+  RW_m_data m_data_start m_data_size-Stack_Size-Heap_Size { ; RW data
+    .ANY (+RW +ZI)
+    * (NonCacheable.init)
+    * (*NonCacheable)
+  }
+  ARM_LIB_HEAP +0 EMPTY Heap_Size {    ; Heap region growing up
+  }
+  ARM_LIB_STACK m_data_start+m_data_size EMPTY -Stack_Size { ; Stack region growing down
+  }
+  RW_m_ncache m_data2_start EMPTY 0 {
+  }
+  RW_m_ncache_unused +0 EMPTY m_data2_size-ImageLength(RW_m_ncache) { ; Empty region added for MPU configuration
+  }
+}

board/TencentOS_tiny_EVB_AIoT/hello_world/KEIL/tosevbrt1062_flexspi_nor.ini

@@ -0,0 +1,89 @@
+/*
+ * Copyright 2018-2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+FUNC void _loadDcdcTrim(void)
+{
+    unsigned int dcdc_trim_loaded;
+    unsigned long ocotp_base;
+    unsigned long ocotp_fuse_bank0_base;
+    unsigned long dcdc_base;
+    unsigned long reg;
+    unsigned long trim_value;
+    unsigned int index;
+
+    ocotp_base = 0x401F4000;
+    ocotp_fuse_bank0_base = ocotp_base + 0x400;
+    dcdc_base = 0x40080000;
+    
+    dcdc_trim_loaded = 0;
+
+    reg = _RDWORD(ocotp_fuse_bank0_base + 0x90);
+    if (reg & (1<<10))
+    {
+      // DCDC: REG0->VBG_TRM
+       trim_value = (reg & (0x1F << 11)) >> 11; 
+       reg = (_RDWORD(dcdc_base + 0x4) & ~(0x1F << 24)) | (trim_value << 24);
+       _WDWORD(dcdc_base + 0x4, reg);
+       dcdc_trim_loaded = 1;
+    }
+
+    reg = _RDWORD(ocotp_fuse_bank0_base + 0x80);
+    if (reg & (1<<30))
+    {
+        index = (reg & (3 << 28)) >> 28;
+        if (index < 4)
+        {
+            // DCDC: REG3->TRG 
+            reg = (_RDWORD(dcdc_base + 0xC) & ~(0x1F)) | ((0xF + index));
+            _WDWORD(dcdc_base + 0xC, reg);
+            dcdc_trim_loaded = 1;
+        }
+    }
+
+    if (dcdc_trim_loaded)
+    {
+        // delay about 400us till dcdc is stable.
+        _Sleep_(1);
+    }
+}
+
+FUNC void restoreFlexRAM(void)
+{
+    unsigned int value;
+    unsigned int base;
+
+    base = 0x400AC000;
+
+    value = _RDWORD(base + 0x44);
+    value &= ~(0xFFFFFFFF);
+    value |= 0x55AFFA55;
+    _WDWORD(base + 0x44, value);
+
+    value = _RDWORD(base + 0x40);
+    value |= (1 << 2);
+    _WDWORD(base + 0x40, value);
+}
+
+FUNC void Setup (void) {
+  _loadDcdcTrim();
+  SP = _RDWORD(0x60002000);          // Setup Stack Pointer
+  PC = _RDWORD(0x60002004);          // Setup Program Counter
+  _WDWORD(0xE000ED08, 0x60002000);   // Setup Vector Table Offset Register
+}
+
+FUNC void OnResetExec (void)  {      // executes upon software RESET
+  restoreFlexRAM();
+  Setup();                           // Setup for Running
+}
+
+restoreFlexRAM();
+
+LOAD %L INCREMENTAL                  // Download
+
+Setup();                             // Setup for Running
+
+// g, main

board/TencentOS_tiny_EVB_AIoT/hello_world/KEIL/tosevbrt1062_ram.ini

@@ -0,0 +1,89 @@
+/*
+ * Copyright 2018-2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+FUNC void _loadDcdcTrim(void)
+{
+    unsigned int dcdc_trim_loaded;
+    unsigned long ocotp_base;
+    unsigned long ocotp_fuse_bank0_base;
+    unsigned long dcdc_base;
+    unsigned long reg;
+    unsigned long trim_value;
+    unsigned int index;
+
+    ocotp_base = 0x401F4000;
+    ocotp_fuse_bank0_base = ocotp_base + 0x400;
+    dcdc_base = 0x40080000;
+    
+    dcdc_trim_loaded = 0;
+
+    reg = _RDWORD(ocotp_fuse_bank0_base + 0x90);
+    if (reg & (1<<10))
+    {
+      // DCDC: REG0->VBG_TRM
+       trim_value = (reg & (0x1F << 11)) >> 11; 
+       reg = (_RDWORD(dcdc_base + 0x4) & ~(0x1F << 24)) | (trim_value << 24);
+       _WDWORD(dcdc_base + 0x4, reg);
+       dcdc_trim_loaded = 1;
+    }
+
+    reg = _RDWORD(ocotp_fuse_bank0_base + 0x80);
+    if (reg & (1<<30))
+    {
+        index = (reg & (3 << 28)) >> 28;
+        if (index < 4)
+        {
+            // DCDC: REG3->TRG 
+            reg = (_RDWORD(dcdc_base + 0xC) & ~(0x1F)) | ((0xF + index));
+            _WDWORD(dcdc_base + 0xC, reg);
+            dcdc_trim_loaded = 1;
+        }
+    }
+
+    if (dcdc_trim_loaded)
+    {
+        // delay about 400us till dcdc is stable.
+        _Sleep_(1);
+    }
+}
+
+FUNC void restoreFlexRAM(void)
+{
+    unsigned int value;
+    unsigned int base;
+
+    base = 0x400AC000;
+
+    value = _RDWORD(base + 0x44);
+    value &= ~(0xFFFFFFFF);
+    value |= 0x55AFFA55;
+    _WDWORD(base + 0x44, value);
+
+    value = _RDWORD(base + 0x40);
+    value |= (1 << 2);
+    _WDWORD(base + 0x40, value);
+}
+
+FUNC void Setup (void) {
+  _loadDcdcTrim();
+  SP = _RDWORD(0x00000000);          // Setup Stack Pointer
+  PC = _RDWORD(0x00000004);          // Setup Program Counter
+  _WDWORD(0xE000ED08, 0x00000000);   // Setup Vector Table Offset Register
+}
+
+FUNC void OnResetExec (void)  {      // executes upon software RESET
+  restoreFlexRAM();
+  Setup();                           // Setup for Running
+}
+
+restoreFlexRAM();
+
+LOAD %L INCREMENTAL                  // Download
+
+Setup();                             // Setup for Running
+
+// g, main

board/TencentOS_tiny_EVB_AIoT/hello_world/board/board.c

@@ -0,0 +1,389 @@
+/*
+ * Copyright 2018-2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "fsl_common.h"
+#include "fsl_debug_console.h"
+#include "board.h"
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+#include "fsl_lpi2c.h"
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+
+/* Get debug console frequency. */
+uint32_t BOARD_DebugConsoleSrcFreq(void)
+{
+    uint32_t freq;
+
+    /* To make it simple, we assume default PLL and divider settings, and the only variable
+       from application is use PLL3 source or OSC source */
+    if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */
+    {
+        freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
+    }
+    else
+    {
+        freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
+    }
+
+    return freq;
+}
+
+/* Initialize debug console. */
+void BOARD_InitDebugConsole(void)
+{
+    uint32_t uartClkSrcFreq = BOARD_DebugConsoleSrcFreq();
+
+    DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE, BOARD_DEBUG_UART_BAUDRATE, BOARD_DEBUG_UART_TYPE, uartClkSrcFreq);
+}
+
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz)
+{
+    lpi2c_master_config_t lpi2cConfig = {0};
+
+    /*
+     * lpi2cConfig.debugEnable = false;
+     * lpi2cConfig.ignoreAck = false;
+     * lpi2cConfig.pinConfig = kLPI2C_2PinOpenDrain;
+     * lpi2cConfig.baudRate_Hz = 100000U;
+     * lpi2cConfig.busIdleTimeout_ns = 0;
+     * lpi2cConfig.pinLowTimeout_ns = 0;
+     * lpi2cConfig.sdaGlitchFilterWidth_ns = 0;
+     * lpi2cConfig.sclGlitchFilterWidth_ns = 0;
+     */
+    LPI2C_MasterGetDefaultConfig(&lpi2cConfig);
+    LPI2C_MasterInit(base, &lpi2cConfig, clkSrc_Hz);
+}
+
+status_t BOARD_LPI2C_Send(LPI2C_Type *base,
+                          uint8_t deviceAddress,
+                          uint32_t subAddress,
+                          uint8_t subAddressSize,
+                          uint8_t *txBuff,
+                          uint8_t txBuffSize)
+{
+    lpi2c_master_transfer_t xfer;
+
+    xfer.flags          = kLPI2C_TransferDefaultFlag;
+    xfer.slaveAddress   = deviceAddress;
+    xfer.direction      = kLPI2C_Write;
+    xfer.subaddress     = subAddress;
+    xfer.subaddressSize = subAddressSize;
+    xfer.data           = txBuff;
+    xfer.dataSize       = txBuffSize;
+
+    return LPI2C_MasterTransferBlocking(base, &xfer);
+}
+
+status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
+                             uint8_t deviceAddress,
+                             uint32_t subAddress,
+                             uint8_t subAddressSize,
+                             uint8_t *rxBuff,
+                             uint8_t rxBuffSize)
+{
+    lpi2c_master_transfer_t xfer;
+
+    xfer.flags          = kLPI2C_TransferDefaultFlag;
+    xfer.slaveAddress   = deviceAddress;
+    xfer.direction      = kLPI2C_Read;
+    xfer.subaddress     = subAddress;
+    xfer.subaddressSize = subAddressSize;
+    xfer.data           = rxBuff;
+    xfer.dataSize       = rxBuffSize;
+
+    return LPI2C_MasterTransferBlocking(base, &xfer);
+}
+
+status_t BOARD_LPI2C_SendSCCB(LPI2C_Type *base,
+                              uint8_t deviceAddress,
+                              uint32_t subAddress,
+                              uint8_t subAddressSize,
+                              uint8_t *txBuff,
+                              uint8_t txBuffSize)
+{
+    lpi2c_master_transfer_t xfer;
+
+    xfer.flags          = kLPI2C_TransferDefaultFlag;
+    xfer.slaveAddress   = deviceAddress;
+    xfer.direction      = kLPI2C_Write;
+    xfer.subaddress     = subAddress;
+    xfer.subaddressSize = subAddressSize;
+    xfer.data           = txBuff;
+    xfer.dataSize       = txBuffSize;
+
+    return LPI2C_MasterTransferBlocking(base, &xfer);
+}
+
+status_t BOARD_LPI2C_ReceiveSCCB(LPI2C_Type *base,
+                                 uint8_t deviceAddress,
+                                 uint32_t subAddress,
+                                 uint8_t subAddressSize,
+                                 uint8_t *rxBuff,
+                                 uint8_t rxBuffSize)
+{
+    status_t status;
+    lpi2c_master_transfer_t xfer;
+
+    xfer.flags          = kLPI2C_TransferDefaultFlag;
+    xfer.slaveAddress   = deviceAddress;
+    xfer.direction      = kLPI2C_Write;
+    xfer.subaddress     = subAddress;
+    xfer.subaddressSize = subAddressSize;
+    xfer.data           = NULL;
+    xfer.dataSize       = 0;
+
+    status = LPI2C_MasterTransferBlocking(base, &xfer);
+
+    if (kStatus_Success == status)
+    {
+        xfer.subaddressSize = 0;
+        xfer.direction      = kLPI2C_Read;
+        xfer.data           = rxBuff;
+        xfer.dataSize       = rxBuffSize;
+
+        status = LPI2C_MasterTransferBlocking(base, &xfer);
+    }
+
+    return status;
+}
+
+void BOARD_Accel_I2C_Init(void)
+{
+    BOARD_LPI2C_Init(BOARD_ACCEL_I2C_BASEADDR, BOARD_ACCEL_I2C_CLOCK_FREQ);
+}
+
+status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff)
+{
+    uint8_t data = (uint8_t)txBuff;
+
+    return BOARD_LPI2C_Send(BOARD_ACCEL_I2C_BASEADDR, deviceAddress, subAddress, subaddressSize, &data, 1);
+}
+
+status_t BOARD_Accel_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
+{
+    return BOARD_LPI2C_Receive(BOARD_ACCEL_I2C_BASEADDR, deviceAddress, subAddress, subaddressSize, rxBuff, rxBuffSize);
+}
+
+void BOARD_Codec_I2C_Init(void)
+{
+    BOARD_LPI2C_Init(BOARD_CODEC_I2C_BASEADDR, BOARD_CODEC_I2C_CLOCK_FREQ);
+}
+
+status_t BOARD_Codec_I2C_Send(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize)
+{
+    return BOARD_LPI2C_Send(BOARD_CODEC_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, (uint8_t *)txBuff,
+                            txBuffSize);
+}
+
+status_t BOARD_Codec_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
+{
+    return BOARD_LPI2C_Receive(BOARD_CODEC_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, rxBuff, rxBuffSize);
+}
+
+void BOARD_Camera_I2C_Init(void)
+{
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, BOARD_CAMERA_I2C_CLOCK_SOURCE_SELECT);
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, BOARD_CAMERA_I2C_CLOCK_SOURCE_DIVIDER);
+    BOARD_LPI2C_Init(BOARD_CAMERA_I2C_BASEADDR, BOARD_CAMERA_I2C_CLOCK_FREQ);
+}
+
+status_t BOARD_Camera_I2C_Send(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize)
+{
+    return BOARD_LPI2C_Send(BOARD_CAMERA_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, (uint8_t *)txBuff,
+                            txBuffSize);
+}
+
+status_t BOARD_Camera_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
+{
+    return BOARD_LPI2C_Receive(BOARD_CAMERA_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, rxBuff,
+                               rxBuffSize);
+}
+
+status_t BOARD_Camera_I2C_SendSCCB(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize)
+{
+    return BOARD_LPI2C_SendSCCB(BOARD_CAMERA_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, (uint8_t *)txBuff,
+                                txBuffSize);
+}
+
+status_t BOARD_Camera_I2C_ReceiveSCCB(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize)
+{
+    return BOARD_LPI2C_ReceiveSCCB(BOARD_CAMERA_I2C_BASEADDR, deviceAddress, subAddress, subAddressSize, rxBuff,
+                                   rxBuffSize);
+}
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+
+/* MPU configuration. */
+void BOARD_ConfigMPU(void)
+{
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
+    extern uint32_t Image$$RW_m_ncache$$Base[];
+    /* RW_m_ncache_unused is a auxiliary region which is used to get the whole size of noncache section */
+    extern uint32_t Image$$RW_m_ncache_unused$$Base[];
+    extern uint32_t Image$$RW_m_ncache_unused$$ZI$$Limit[];
+    uint32_t nonCacheStart = (uint32_t)Image$$RW_m_ncache$$Base;
+    uint32_t size          = ((uint32_t)Image$$RW_m_ncache_unused$$Base == nonCacheStart) ?
+                        0 :
+                        ((uint32_t)Image$$RW_m_ncache_unused$$ZI$$Limit - nonCacheStart);
+#elif defined(__MCUXPRESSO)
+    extern uint32_t __base_NCACHE_REGION;
+    extern uint32_t __top_NCACHE_REGION;
+    uint32_t nonCacheStart = (uint32_t)(&__base_NCACHE_REGION);
+    uint32_t size          = (uint32_t)(&__top_NCACHE_REGION) - nonCacheStart;
+#elif defined(__ICCARM__) || defined(__GNUC__)
+    extern uint32_t __NCACHE_REGION_START[];
+    extern uint32_t __NCACHE_REGION_SIZE[];
+    uint32_t nonCacheStart = (uint32_t)__NCACHE_REGION_START;
+    uint32_t size          = (uint32_t)__NCACHE_REGION_SIZE;
+#endif
+    volatile uint32_t i = 0;
+
+    /* Disable I cache and D cache */
+    if (SCB_CCR_IC_Msk == (SCB_CCR_IC_Msk & SCB->CCR))
+    {
+        SCB_DisableICache();
+    }
+    if (SCB_CCR_DC_Msk == (SCB_CCR_DC_Msk & SCB->CCR))
+    {
+        SCB_DisableDCache();
+    }
+
+    /* Disable MPU */
+    ARM_MPU_Disable();
+
+    /* MPU configure:
+     * Use ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable,
+     * SubRegionDisable, Size)
+     * API in mpu_armv7.h.
+     * param DisableExec       Instruction access (XN) disable bit,0=instruction fetches enabled, 1=instruction fetches
+     * disabled.
+     * param AccessPermission  Data access permissions, allows you to configure read/write access for User and
+     * Privileged mode.
+     *      Use MACROS defined in mpu_armv7.h:
+     * ARM_MPU_AP_NONE/ARM_MPU_AP_PRIV/ARM_MPU_AP_URO/ARM_MPU_AP_FULL/ARM_MPU_AP_PRO/ARM_MPU_AP_RO
+     * Combine TypeExtField/IsShareable/IsCacheable/IsBufferable to configure MPU memory access attributes.
+     *  TypeExtField  IsShareable  IsCacheable  IsBufferable   Memory Attribtue    Shareability        Cache
+     *     0             x           0           0             Strongly Ordered    shareable
+     *     0             x           0           1              Device             shareable
+     *     0             0           1           0              Normal             not shareable   Outer and inner write
+     * through no write allocate
+     *     0             0           1           1              Normal             not shareable   Outer and inner write
+     * back no write allocate
+     *     0             1           1           0              Normal             shareable       Outer and inner write
+     * through no write allocate
+     *     0             1           1           1              Normal             shareable       Outer and inner write
+     * back no write allocate
+     *     1             0           0           0              Normal             not shareable   outer and inner
+     * noncache
+     *     1             1           0           0              Normal             shareable       outer and inner
+     * noncache
+     *     1             0           1           1              Normal             not shareable   outer and inner write
+     * back write/read acllocate
+     *     1             1           1           1              Normal             shareable       outer and inner write
+     * back write/read acllocate
+     *     2             x           0           0              Device              not shareable
+     *  Above are normal use settings, if your want to see more details or want to config different inner/outter cache
+     * policy.
+     *  please refer to Table 4-55 /4-56 in arm cortex-M7 generic user guide <dui0646b_cortex_m7_dgug.pdf>
+     * param SubRegionDisable  Sub-region disable field. 0=sub-region is enabled, 1=sub-region is disabled.
+     * param Size              Region size of the region to be configured. use ARM_MPU_REGION_SIZE_xxx MACRO in
+     * mpu_armv7.h.
+     */
+
+    /*
+     * Add default region to deny access to whole address space to workaround speculative prefetch.
+     * Refer to Arm errata 1013783-B for more details.
+     *
+     */
+    /* Region 0 setting: Instruction access disabled, No data access permission. */
+    MPU->RBAR = ARM_MPU_RBAR(0, 0x00000000U);
+    MPU->RASR = ARM_MPU_RASR(1, ARM_MPU_AP_NONE, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_4GB);
+
+    /* Region 1 setting: Memory with Device type, not shareable, non-cacheable. */
+    MPU->RBAR = ARM_MPU_RBAR(1, 0x80000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
+
+    /* Region 2 setting: Memory with Device type, not shareable,  non-cacheable. */
+    MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
+
+#if defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)
+    /* Region 3 setting: Memory with Normal type, not shareable, outer/inner write back. */
+    MPU->RBAR = ARM_MPU_RBAR(3, 0x60000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_RO, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_8MB);
+#endif
+
+    /* Region 4 setting: Memory with Device type, not shareable, non-cacheable. */
+    MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
+
+    /* Region 5 setting: Memory with Normal type, not shareable, outer/inner write back */
+    MPU->RBAR = ARM_MPU_RBAR(5, 0x00000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
+
+    /* Region 6 setting: Memory with Normal type, not shareable, outer/inner write back */
+    MPU->RBAR = ARM_MPU_RBAR(6, 0x20000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
+
+    /* Region 7 setting: Memory with Normal type, not shareable, outer/inner write back */
+    MPU->RBAR = ARM_MPU_RBAR(7, 0x20200000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_512KB);
+
+    /* Region 8 setting: Memory with Normal type, not shareable, outer/inner write back */
+    MPU->RBAR = ARM_MPU_RBAR(8, 0x20280000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_256KB);
+
+    /* Region 9 setting: Memory with Normal type, not shareable, outer/inner write back */
+    MPU->RBAR = ARM_MPU_RBAR(9, 0x80000000U);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_32MB);
+
+    while ((size >> i) > 0x1U)
+    {
+        i++;
+    }
+
+    if (i != 0)
+    {
+        /* The MPU region size should be 2^N, 5<=N<=32, region base should be multiples of size. */
+        assert(!(nonCacheStart % size));
+        assert(size == (uint32_t)(1 << i));
+        assert(i >= 5);
+
+        /* Region 10 setting: Memory with Normal type, not shareable, non-cacheable */
+        MPU->RBAR = ARM_MPU_RBAR(10, nonCacheStart);
+        MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 0, 0, 0, 0, i - 1);
+    }
+
+    /* Region 10 setting: Memory with Device type, not shareable, non-cacheable */
+    MPU->RBAR = ARM_MPU_RBAR(11, 0x40000000);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_4MB);
+
+    /* Region 12 setting: Memory with Device type, not shareable, non-cacheable */
+    MPU->RBAR = ARM_MPU_RBAR(12, 0x42000000);
+    MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1MB);
+
+    /* Enable MPU */
+    ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk);
+
+    /* Enable I cache and D cache */
+    SCB_EnableDCache();
+    SCB_EnableICache();
+}

board/TencentOS_tiny_EVB_AIoT/hello_world/board/board.h

@@ -0,0 +1,220 @@
+/*
+ * Copyright 2018-2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#include "clock_config.h"
+#include "fsl_common.h"
+#include "fsl_gpio.h"
+#include "fsl_clock.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief The board name */
+#define BOARD_NAME "MIMXRT1060-EVK"
+
+/* The UART to use for debug messages. */
+#define BOARD_DEBUG_UART_TYPE     kSerialPort_Uart
+#define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART1
+#define BOARD_DEBUG_UART_INSTANCE 1U
+
+#define BOARD_DEBUG_UART_CLK_FREQ BOARD_DebugConsoleSrcFreq()
+
+#define BOARD_UART_IRQ         LPUART1_IRQn
+#define BOARD_UART_IRQ_HANDLER LPUART1_IRQHandler
+
+#ifndef BOARD_DEBUG_UART_BAUDRATE
+#define BOARD_DEBUG_UART_BAUDRATE (115200U)
+#endif /* BOARD_DEBUG_UART_BAUDRATE */
+
+/*! @brief The USER_LED used for board */
+#define LOGIC_LED_ON  (0U)
+#define LOGIC_LED_OFF (1U)
+#ifndef BOARD_USER_LED_GPIO
+#define BOARD_USER_LED_GPIO GPIO3
+#endif
+#ifndef BOARD_USER_LED_GPIO_PIN
+#define BOARD_USER_LED_GPIO_PIN (2U)
+#endif
+
+#define USER_LED_INIT(output)                                            \
+    GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, output); \
+    BOARD_USER_LED_GPIO->GDIR |= (1U << BOARD_USER_LED_GPIO_PIN) /*!< Enable target USER_LED */
+#define USER_LED_ON() \
+    GPIO_PortClear(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN)                  /*!< Turn off target USER_LED */
+#define USER_LED_OFF() GPIO_PortSet(BOARD_USER_LED_GPIO, 1U << BOARD_USER_LED_GPIO_PIN) /*!<Turn on target USER_LED*/
+#define USER_LED_TOGGLE()                                       \
+    GPIO_PinWrite(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN, \
+                  0x1 ^ GPIO_PinRead(BOARD_USER_LED_GPIO, BOARD_USER_LED_GPIO_PIN)) /*!< Toggle target USER_LED */
+
+/*! @brief Define the port interrupt number for the board switches */
+#ifndef BOARD_USER_BUTTON_GPIO
+#define BOARD_USER_BUTTON_GPIO GPIO5
+#endif
+#ifndef BOARD_USER_BUTTON_GPIO_PIN
+#define BOARD_USER_BUTTON_GPIO_PIN (0U)
+#endif
+#define BOARD_USER_BUTTON_IRQ         GPIO5_Combined_0_15_IRQn
+#define BOARD_USER_BUTTON_IRQ_HANDLER GPIO5_Combined_0_15_IRQHandler
+#define BOARD_USER_BUTTON_NAME        "SW8"
+
+/*! @brief The board flash size */
+#define BOARD_FLASH_SIZE (0x800000U)
+
+/*! @brief The ENET PHY address. */
+#define BOARD_ENET0_PHY_ADDRESS (0x02U) /* Phy address of enet port 0. */
+
+/* USB PHY condfiguration */
+#define BOARD_USB_PHY_D_CAL     (0x0CU)
+#define BOARD_USB_PHY_TXCAL45DP (0x06U)
+#define BOARD_USB_PHY_TXCAL45DM (0x06U)
+
+#define BOARD_ARDUINO_INT_IRQ   (GPIO1_INT3_IRQn)
+#define BOARD_ARDUINO_I2C_IRQ   (LPI2C1_IRQn)
+#define BOARD_ARDUINO_I2C_INDEX (1)
+
+/*! @brief The WIFI-QCA shield pin. */
+#define BOARD_INITGT202SHIELD_PWRON_GPIO      GPIO1               /*!< GPIO device name: GPIO */
+#define BOARD_INITGT202SHIELD_PWRON_PORT      1U                  /*!< PORT device index: 1 */
+#define BOARD_INITGT202SHIELD_PWRON_GPIO_PIN  3U                  /*!< PIO4 pin index: 3 */
+#define BOARD_INITGT202SHIELD_PWRON_PIN_NAME  GPIO1_3             /*!< Pin name */
+#define BOARD_INITGT202SHIELD_PWRON_LABEL     "PWRON"             /*!< Label */
+#define BOARD_INITGT202SHIELD_PWRON_NAME      "PWRON"             /*!< Identifier name */
+#define BOARD_INITGT202SHIELD_PWRON_DIRECTION kGPIO_DigitalOutput /*!< Direction */
+
+#define BOARD_INITGT202SHIELD_IRQ_GPIO      GPIO1              /*!< GPIO device name: GPIO */
+#define BOARD_INITGT202SHIELD_IRQ_PORT      1U                 /*!< PORT device index: 1 */
+#define BOARD_INITGT202SHIELD_IRQ_GPIO_PIN  19U                /*!< PIO1 pin index: 19 */
+#define BOARD_INITGT202SHIELD_IRQ_PIN_NAME  GPIO1_19           /*!< Pin name */
+#define BOARD_INITGT202SHIELD_IRQ_LABEL     "IRQ"              /*!< Label */
+#define BOARD_INITGT202SHIELD_IRQ_NAME      "IRQ"              /*!< Identifier name */
+#define BOARD_INITGT202SHIELD_IRQ_DIRECTION kGPIO_DigitalInput /*!< Direction */
+
+#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO      GPIO1               /*!< GPIO device name: GPIO */
+#define BOARD_INITSILEX2401SHIELD_PWRON_PORT      1U                  /*!< PORT device index: 1 */
+#define BOARD_INITSILEX2401SHIELD_PWRON_GPIO_PIN  9U                  /*!< PIO4 pin index: 9 */
+#define BOARD_INITSILEX2401SHIELD_PWRON_PIN_NAME  GPIO1_9             /*!< Pin name */
+#define BOARD_INITSILEX2401SHIELD_PWRON_LABEL     "PWRON"             /*!< Label */
+#define BOARD_INITSILEX2401SHIELD_PWRON_NAME      "PWRON"             /*!< Identifier name */
+#define BOARD_INITSILEX2401SHIELD_PWRON_DIRECTION kGPIO_DigitalOutput /*!< Direction */
+
+#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO      GPIO1              /*!< GPIO device name: GPIO */
+#define BOARD_INITSILEX2401SHIELD_IRQ_PORT      1U                 /*!< PORT device index: 1 */
+#define BOARD_INITSILEX2401SHIELD_IRQ_GPIO_PIN  11U                /*!< PIO1 pin index: 11 */
+#define BOARD_INITSILEX2401SHIELD_IRQ_PIN_NAME  GPIO1_11           /*!< Pin name */
+#define BOARD_INITSILEX2401SHIELD_IRQ_LABEL     "IRQ"              /*!< Label */
+#define BOARD_INITSILEX2401SHIELD_IRQ_NAME      "IRQ"              /*!< Identifier name */
+#define BOARD_INITSILEX2401SHIELD_IRQ_DIRECTION kGPIO_DigitalInput /*!< Direction */
+
+/* @Brief Board accelerator sensor configuration */
+#define BOARD_ACCEL_I2C_BASEADDR LPI2C1
+/* Select USB1 PLL (480 MHz) as LPI2C's clock source */
+#define BOARD_ACCEL_I2C_CLOCK_SOURCE_SELECT (0U)
+/* Clock divider for LPI2C clock source */
+#define BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER (5U)
+#define BOARD_ACCEL_I2C_CLOCK_FREQ           (CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8 / (BOARD_ACCEL_I2C_CLOCK_SOURCE_DIVIDER + 1U))
+
+#define BOARD_CODEC_I2C_BASEADDR             LPI2C1
+#define BOARD_CODEC_I2C_INSTANCE             1U
+#define BOARD_CODEC_I2C_CLOCK_SOURCE_SELECT  (0U)
+#define BOARD_CODEC_I2C_CLOCK_SOURCE_DIVIDER (5U)
+#define BOARD_CODEC_I2C_CLOCK_FREQ           (10000000U)
+
+/* @Brief Board CAMERA configuration */
+#define BOARD_CAMERA_I2C_BASEADDR             LPI2C1
+#define BOARD_CAMERA_I2C_CLOCK_SOURCE_DIVIDER (5U)
+#define BOARD_CAMERA_I2C_CLOCK_SOURCE_SELECT  (0U) /* Select USB1 PLL (480 MHz) as LPI2C's clock source */
+#define BOARD_CAMERA_I2C_CLOCK_FREQ \
+    (CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8 / (BOARD_CAMERA_I2C_CLOCK_SOURCE_DIVIDER + 1U))
+
+#define BOARD_CAMERA_I2C_SCL_GPIO GPIO1
+#define BOARD_CAMERA_I2C_SCL_PIN  16
+#define BOARD_CAMERA_I2C_SDA_GPIO GPIO1
+#define BOARD_CAMERA_I2C_SDA_PIN  17
+#define BOARD_CAMERA_PWDN_GPIO    GPIO1
+#define BOARD_CAMERA_PWDN_PIN     4
+
+/* @Brief Board Bluetooth HCI UART configuration */
+#define BOARD_BT_UART_BASEADDR    LPUART3
+#define BOARD_BT_UART_INSTANCE    3
+#define BOARD_BT_UART_BAUDRATE    3000000
+#define BOARD_BT_UART_CLK_FREQ    BOARD_DebugConsoleSrcFreq()
+#define BOARD_BT_UART_IRQ         LPUART3_IRQn
+#define BOARD_BT_UART_IRQ_HANDLER LPUART3_IRQHandler
+
+/*! @brief board has sdcard */
+#define BOARD_HAS_SDCARD (1U)
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+uint32_t BOARD_DebugConsoleSrcFreq(void);
+
+void BOARD_InitDebugConsole(void);
+
+void BOARD_ConfigMPU(void);
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz);
+status_t BOARD_LPI2C_Send(LPI2C_Type *base,
+                          uint8_t deviceAddress,
+                          uint32_t subAddress,
+                          uint8_t subaddressSize,
+                          uint8_t *txBuff,
+                          uint8_t txBuffSize);
+status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
+                             uint8_t deviceAddress,
+                             uint32_t subAddress,
+                             uint8_t subaddressSize,
+                             uint8_t *rxBuff,
+                             uint8_t rxBuffSize);
+status_t BOARD_LPI2C_SendSCCB(LPI2C_Type *base,
+                              uint8_t deviceAddress,
+                              uint32_t subAddress,
+                              uint8_t subaddressSize,
+                              uint8_t *txBuff,
+                              uint8_t txBuffSize);
+status_t BOARD_LPI2C_ReceiveSCCB(LPI2C_Type *base,
+                                 uint8_t deviceAddress,
+                                 uint32_t subAddress,
+                                 uint8_t subaddressSize,
+                                 uint8_t *rxBuff,
+                                 uint8_t rxBuffSize);
+void BOARD_Accel_I2C_Init(void);
+status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
+status_t BOARD_Accel_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+void BOARD_Codec_I2C_Init(void);
+status_t BOARD_Codec_I2C_Send(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
+status_t BOARD_Codec_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+void BOARD_Camera_I2C_Init(void);
+status_t BOARD_Camera_I2C_Send(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
+status_t BOARD_Camera_I2C_Receive(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+
+status_t BOARD_Camera_I2C_SendSCCB(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
+status_t BOARD_Camera_I2C_ReceiveSCCB(
+    uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+
+void BOARD_SD_Pin_Config(uint32_t speed, uint32_t strength);
+void BOARD_MMC_Pin_Config(uint32_t speed, uint32_t strength);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+#endif /* _BOARD_H_ */

board/TencentOS_tiny_EVB_AIoT/hello_world/board/clock_config.c

@@ -0,0 +1,503 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v8.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 10.0.0
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+/* System clock frequency. */
+extern uint32_t SystemCoreClock;
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 24 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2'}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4'}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+    /* Disable Usb1 PLL output for USBPHY1. */
+    CCM_ANALOG->PLL_USB1 &= ~CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK;
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* DeInit Usb2 PLL. */
+    CLOCK_DeinitUsb2Pll();
+    /* Bypass Usb2 PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllUsb2, 1);
+    /* Enable Usb2 PLL output. */
+    CCM_ANALOG->PLL_USB2 |= CCM_ANALOG_PLL_USB2_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
+

board/TencentOS_tiny_EVB_AIoT/hello_world/board/clock_config.h

@@ -0,0 +1,121 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              24000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
+

board/TencentOS_tiny_EVB_AIoT/hello_world/board/dcd.c

@@ -0,0 +1,308 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#include "dcd.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.xip_board"
+#endif
+
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".boot_hdr.dcd_data"), used))
+#elif defined(__ICCARM__)
+#pragma location = ".boot_hdr.dcd_data"
+#endif
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: DCDx v3.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 10.0.0
+board: MIMXRT1060-EVK
+output_format: c_array
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* COMMENTS BELOW ARE USED AS SETTINGS FOR DCD DATA */
+const uint8_t dcd_data[] = {
+	/* HEADER */
+	/* Tag */
+	0xD2,
+	/* Image Length */
+	0x04, 0x10,
+	/* Version */
+	0x41,
+
+	/* COMMANDS */
+
+	/* group: 'Imported Commands' */
+	/* #1.1-113, command header bytes for merged 'Write - value' command */
+	0xCC, 0x03, 0x8C, 0x04,
+	/* #1.1, command: write_value, address: CCM_CCGR0, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x68, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.2, command: write_value, address: CCM_CCGR1, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x6C, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.3, command: write_value, address: CCM_CCGR2, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x70, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.4, command: write_value, address: CCM_CCGR3, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x74, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.5, command: write_value, address: CCM_CCGR4, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x78, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.6, command: write_value, address: CCM_CCGR5, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x7C, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.7, command: write_value, address: CCM_CCGR6, value: 0xFFFFFFFF, size: 4 */
+	0x40, 0x0F, 0xC0, 0x80, 0xFF, 0xFF, 0xFF, 0xFF,
+	/* #1.8, command: write_value, address: CCM_ANALOG_PLL_SYS, value: 0x2001, size: 4 */
+	0x40, 0x0D, 0x80, 0x30, 0x00, 0x00, 0x20, 0x01,
+	/* #1.9, command: write_value, address: CCM_ANALOG_PFD_528, value: 0x1D0000, size: 4 */
+	0x40, 0x0D, 0x81, 0x00, 0x00, 0x1D, 0x00, 0x00,
+	/* #1.10, command: write_value, address: CCM_CBCDR, value: 0x10D40, size: 4 */
+	0x40, 0x0F, 0xC0, 0x14, 0x00, 0x01, 0x0D, 0x40,
+	/* #1.11, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_00, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x14, 0x00, 0x00, 0x00, 0x00,
+	/* #1.12, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_01, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x18, 0x00, 0x00, 0x00, 0x00,
+	/* #1.13, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_02, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x1C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.14, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_03, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x20, 0x00, 0x00, 0x00, 0x00,
+	/* #1.15, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_04, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x24, 0x00, 0x00, 0x00, 0x00,
+	/* #1.16, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_05, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x28, 0x00, 0x00, 0x00, 0x00,
+	/* #1.17, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_06, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x2C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.18, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_07, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x30, 0x00, 0x00, 0x00, 0x00,
+	/* #1.19, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_08, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x34, 0x00, 0x00, 0x00, 0x00,
+	/* #1.20, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_09, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x38, 0x00, 0x00, 0x00, 0x00,
+	/* #1.21, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_10, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x3C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.22, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_11, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x40, 0x00, 0x00, 0x00, 0x00,
+	/* #1.23, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_12, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x44, 0x00, 0x00, 0x00, 0x00,
+	/* #1.24, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_13, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x48, 0x00, 0x00, 0x00, 0x00,
+	/* #1.25, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_14, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x4C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.26, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_15, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x50, 0x00, 0x00, 0x00, 0x00,
+	/* #1.27, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_16, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x54, 0x00, 0x00, 0x00, 0x00,
+	/* #1.28, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_17, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x58, 0x00, 0x00, 0x00, 0x00,
+	/* #1.29, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_18, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x5C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.30, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_19, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00,
+	/* #1.31, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_20, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x64, 0x00, 0x00, 0x00, 0x00,
+	/* #1.32, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_21, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x68, 0x00, 0x00, 0x00, 0x00,
+	/* #1.33, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_22, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x6C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.34, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_23, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00,
+	/* #1.35, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_24, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x74, 0x00, 0x00, 0x00, 0x00,
+	/* #1.36, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_25, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x78, 0x00, 0x00, 0x00, 0x00,
+	/* #1.37, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_26, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x7C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.38, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_27, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
+	/* #1.39, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_28, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x84, 0x00, 0x00, 0x00, 0x00,
+	/* #1.40, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_29, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x88, 0x00, 0x00, 0x00, 0x00,
+	/* #1.41, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_30, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x8C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.42, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_31, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x90, 0x00, 0x00, 0x00, 0x00,
+	/* #1.43, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_32, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x94, 0x00, 0x00, 0x00, 0x00,
+	/* #1.44, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_33, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x98, 0x00, 0x00, 0x00, 0x00,
+	/* #1.45, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_34, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0x9C, 0x00, 0x00, 0x00, 0x00,
+	/* #1.46, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_35, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0xA0, 0x00, 0x00, 0x00, 0x00,
+	/* #1.47, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_36, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0xA4, 0x00, 0x00, 0x00, 0x00,
+	/* #1.48, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_37, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0xA8, 0x00, 0x00, 0x00, 0x00,
+	/* #1.49, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_38, value: 0x00, size: 4 */
+	0x40, 0x1F, 0x80, 0xAC, 0x00, 0x00, 0x00, 0x00,
+	/* #1.50, command: write_value, address: IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_39, value: 0x10, size: 4 */
+	0x40, 0x1F, 0x80, 0xB0, 0x00, 0x00, 0x00, 0x10,
+	/* #1.51, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_00, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x04, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.52, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_01, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x08, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.53, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_02, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x0C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.54, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_03, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x10, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.55, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_04, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x14, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.56, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_05, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x18, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.57, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_06, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x1C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.58, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_07, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x20, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.59, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_08, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x24, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.60, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_09, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x28, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.61, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_10, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x2C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.62, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_11, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x30, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.63, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_12, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x34, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.64, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_13, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x38, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.65, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_14, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x3C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.66, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_15, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x40, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.67, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_16, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x44, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.68, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_17, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x48, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.69, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_18, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x4C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.70, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_19, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x50, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.71, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_20, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x54, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.72, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_21, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x58, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.73, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_22, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x5C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.74, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_23, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x60, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.75, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_24, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x64, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.76, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_25, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x68, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.77, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_26, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x6C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.78, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_27, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x70, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.79, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_28, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x74, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.80, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_29, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x78, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.81, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_30, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x7C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.82, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_31, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x80, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.83, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_32, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x84, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.84, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_33, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x88, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.85, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_34, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x8C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.86, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_35, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x90, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.87, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_36, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x94, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.88, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_37, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x98, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.89, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_38, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0x9C, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.90, command: write_value, address: IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_39, value: 0x110F9, size: 4 */
+	0x40, 0x1F, 0x82, 0xA0, 0x00, 0x01, 0x10, 0xF9,
+	/* #1.91, command: write_value, address: SEMC_MCR, value: 0x10000004, size: 4 */
+	0x40, 0x2F, 0x00, 0x00, 0x10, 0x00, 0x00, 0x04,
+	/* #1.92, command: write_value, address: SEMC_BMCR0, value: 0x81, size: 4 */
+	0x40, 0x2F, 0x00, 0x08, 0x00, 0x00, 0x00, 0x81,
+	/* #1.93, command: write_value, address: SEMC_BMCR1, value: 0x81, size: 4 */
+	0x40, 0x2F, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x81,
+	/* #1.94, command: write_value, address: SEMC_BR0, value: 0x8000001B, size: 4 */
+	0x40, 0x2F, 0x00, 0x10, 0x80, 0x00, 0x00, 0x1B,
+	/* #1.95, command: write_value, address: SEMC_BR1, value: 0x8200001B, size: 4 */
+	0x40, 0x2F, 0x00, 0x14, 0x82, 0x00, 0x00, 0x1B,
+	/* #1.96, command: write_value, address: SEMC_BR2, value: 0x8400001B, size: 4 */
+	0x40, 0x2F, 0x00, 0x18, 0x84, 0x00, 0x00, 0x1B,
+	/* #1.97, command: write_value, address: SEMC_BR3, value: 0x8600001B, size: 4 */
+	0x40, 0x2F, 0x00, 0x1C, 0x86, 0x00, 0x00, 0x1B,
+	/* #1.98, command: write_value, address: SEMC_BR4, value: 0x90000021, size: 4 */
+	0x40, 0x2F, 0x00, 0x20, 0x90, 0x00, 0x00, 0x21,
+	/* #1.99, command: write_value, address: SEMC_BR5, value: 0xA0000019, size: 4 */
+	0x40, 0x2F, 0x00, 0x24, 0xA0, 0x00, 0x00, 0x19,
+	/* #1.100, command: write_value, address: SEMC_BR6, value: 0xA8000017, size: 4 */
+	0x40, 0x2F, 0x00, 0x28, 0xA8, 0x00, 0x00, 0x17,
+	/* #1.101, command: write_value, address: SEMC_BR7, value: 0xA900001B, size: 4 */
+	0x40, 0x2F, 0x00, 0x2C, 0xA9, 0x00, 0x00, 0x1B,
+	/* #1.102, command: write_value, address: SEMC_BR8, value: 0x21, size: 4 */
+	0x40, 0x2F, 0x00, 0x30, 0x00, 0x00, 0x00, 0x21,
+	/* #1.103, command: write_value, address: SEMC_IOCR, value: 0x79A8, size: 4 */
+	0x40, 0x2F, 0x00, 0x04, 0x00, 0x00, 0x79, 0xA8,
+	/* #1.104, command: write_value, address: SEMC_SDRAMCR0, value: 0xF31, size: 4 */
+	0x40, 0x2F, 0x00, 0x40, 0x00, 0x00, 0x0F, 0x31,
+	/* #1.105, command: write_value, address: SEMC_SDRAMCR1, value: 0x652922, size: 4 */
+	0x40, 0x2F, 0x00, 0x44, 0x00, 0x65, 0x29, 0x22,
+	/* #1.106, command: write_value, address: SEMC_SDRAMCR2, value: 0x10920, size: 4 */
+	0x40, 0x2F, 0x00, 0x48, 0x00, 0x01, 0x09, 0x20,
+	/* #1.107, command: write_value, address: SEMC_SDRAMCR3, value: 0x50210A08, size: 4 */
+	0x40, 0x2F, 0x00, 0x4C, 0x50, 0x21, 0x0A, 0x08,
+	/* #1.108, command: write_value, address: SEMC_DBICR0, value: 0x21, size: 4 */
+	0x40, 0x2F, 0x00, 0x80, 0x00, 0x00, 0x00, 0x21,
+	/* #1.109, command: write_value, address: SEMC_DBICR1, value: 0x888888, size: 4 */
+	0x40, 0x2F, 0x00, 0x84, 0x00, 0x88, 0x88, 0x88,
+	/* #1.110, command: write_value, address: SEMC_IPCR1, value: 0x02, size: 4 */
+	0x40, 0x2F, 0x00, 0x94, 0x00, 0x00, 0x00, 0x02,
+	/* #1.111, command: write_value, address: SEMC_IPCR2, value: 0x00, size: 4 */
+	0x40, 0x2F, 0x00, 0x98, 0x00, 0x00, 0x00, 0x00,
+	/* #1.112, command: write_value, address: SEMC_IPCR0, value: 0x80000000, size: 4 */
+	0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00,
+	/* #1.113, command: write_value, address: SEMC_IPCMD, value: 0xA55A000F, size: 4 */
+	0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0F,
+	/* #2, command: check_any_bit_set, address: SEMC_INTR, value: 0x01, size: 4 */
+	0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01,
+	/* #3.1-2, command header bytes for merged 'Write - value' command */
+	0xCC, 0x00, 0x14, 0x04,
+	/* #3.1, command: write_value, address: SEMC_IPCR0, value: 0x80000000, size: 4 */
+	0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00,
+	/* #3.2, command: write_value, address: SEMC_IPCMD, value: 0xA55A000C, size: 4 */
+	0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0C,
+	/* #4, command: check_any_bit_set, address: SEMC_INTR, value: 0x01, size: 4 */
+	0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01,
+	/* #5.1-2, command header bytes for merged 'Write - value' command */
+	0xCC, 0x00, 0x14, 0x04,
+	/* #5.1, command: write_value, address: SEMC_IPCR0, value: 0x80000000, size: 4 */
+	0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00,
+	/* #5.2, command: write_value, address: SEMC_IPCMD, value: 0xA55A000C, size: 4 */
+	0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0C,
+	/* #6, command: check_any_bit_set, address: SEMC_INTR, value: 0x01, size: 4 */
+	0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01,
+	/* #7.1-3, command header bytes for merged 'Write - value' command */
+	0xCC, 0x00, 0x1C, 0x04,
+	/* #7.1, command: write_value, address: SEMC_IPTXDAT, value: 0x33, size: 4 */
+	0x40, 0x2F, 0x00, 0xA0, 0x00, 0x00, 0x00, 0x33,
+	/* #7.2, command: write_value, address: SEMC_IPCR0, value: 0x80000000, size: 4 */
+	0x40, 0x2F, 0x00, 0x90, 0x80, 0x00, 0x00, 0x00,
+	/* #7.3, command: write_value, address: SEMC_IPCMD, value: 0xA55A000A, size: 4 */
+	0x40, 0x2F, 0x00, 0x9C, 0xA5, 0x5A, 0x00, 0x0A,
+	/* #8, command: check_any_bit_set, address: SEMC_INTR, value: 0x01, size: 4 */
+	0xCF, 0x00, 0x0C, 0x1C, 0x40, 0x2F, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01,
+	/* #9, command: write_value, address: SEMC_SDRAMCR3, value: 0x50210A09, size: 4 */
+	0xCC, 0x00, 0x0C, 0x04, 0x40, 0x2F, 0x00, 0x4C, 0x50, 0x21, 0x0A, 0x09
+	};
+/* BE CAREFUL MODIFYING THIS SETTINGS - IT IS YAML SETTINGS FOR TOOLS */
+
+#else
+const uint8_t dcd_data[] = {0x00};
+#endif /* XIP_BOOT_HEADER_DCD_ENABLE */
+#endif /* XIP_BOOT_HEADER_ENABLE */

board/TencentOS_tiny_EVB_AIoT/hello_world/board/dcd.h

@@ -0,0 +1,25 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef __DCD__
+#define __DCD__
+
+#include <stdint.h>
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief XIP_BOARD driver version 2.0.0. */
+#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+/*************************************
+ *  DCD Data
+ *************************************/
+#define DCD_TAG_HEADER (0xD2)
+#define DCD_VERSION (0x41)
+#define DCD_TAG_HEADER_SHIFT (24)
+#define DCD_ARRAY_SIZE 1
+
+#endif /* __DCD__ */

board/TencentOS_tiny_EVB_AIoT/hello_world/board/mcu_init.c

@@ -0,0 +1,20 @@
+#include "mcu_init.h"
+
+void board_init(void)
+{
+    /* Init board hardware. */
+    BOARD_ConfigMPU();
+    BOARD_InitPins();
+    BOARD_InitBootClocks();
+    
+    BOARD_InitDebugConsole();
+}
+
+void SysTick_Handler(void)
+{
+    if (tos_knl_is_running()) {
+        tos_knl_irq_enter();
+        tos_tick_handler();
+        tos_knl_irq_leave();
+    }
+}

board/TencentOS_tiny_EVB_AIoT/hello_world/board/mcu_init.h

@@ -0,0 +1,20 @@
+#ifndef __MCU_INIT_H
+#define __MCU_INIT_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "tos_k.h"
+#include "fsl_device_registers.h"
+#include "fsl_debug_console.h"
+#include "pin_mux.h"
+#include "clock_config.h"
+#include "board.h"
+#include "fsl_gpio.h"
+
+void board_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ __MCU_INIT_H */

board/TencentOS_tiny_EVB_AIoT/hello_world/board/pin_mux.c

@@ -0,0 +1,67 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v10.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 10.0.0
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ * 
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ * 
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: M3, peripheral: GPIO3, signal: 'gpio_io, 02', pin_signal: GPIO_SD_B1_02}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); 
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); 
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_GPIO3_IO02, 0U); 
+  IOMUXC_GPR->GPR28 = ((IOMUXC_GPR->GPR28 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR28_GPIO_MUX3_GPIO_SEL_MASK))) 
+      | IOMUXC_GPR_GPR28_GPIO_MUX3_GPIO_SEL(0x00U) 
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U); 
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U); 
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/

board/TencentOS_tiny_EVB_AIoT/hello_world/board/pin_mux.h

@@ -0,0 +1,83 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR28_GPIO_MUX3_GPIO_SEL_MASK 0x04U /*!< GPIO3 and GPIO8 share same IO MUX function, GPIO_MUX3 selects one GPIO function: affected bits mask */
+
+/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_RXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_RXD_SIGNAL                                       RX   /*!< Signal name */
+
+/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_TXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_TXD_SIGNAL                                       TX   /*!< Signal name */
+
+/* GPIO_SD_B1_02 (coord M3), FlexSPI_D1_B */
+/* Routed pin properties */
+#define BOARD_INITPINS_FlexSPI_D1_B_PERIPHERAL                             GPIO3   /*!< Peripheral name */
+#define BOARD_INITPINS_FlexSPI_D1_B_SIGNAL                               gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_FlexSPI_D1_B_CHANNEL                                   2U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_FlexSPI_D1_B_GPIO                                   GPIO3   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_FlexSPI_D1_B_GPIO_PIN                                  2U   /*!< GPIO pin number */
+#define BOARD_INITPINS_FlexSPI_D1_B_GPIO_PIN_MASK                     (1U << 2U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_FlexSPI_D1_B_PORT                                   GPIO3   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_FlexSPI_D1_B_PIN                                       2U   /*!< PORT pin number */
+#define BOARD_INITPINS_FlexSPI_D1_B_PIN_MASK                          (1U << 2U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/

board/TencentOS_tiny_EVB_AIoT/hello_world/board/xip/tosevbrt1062_flexspi_nor_config.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright 2018-2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "tosevbrt1062_flexspi_nor_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.xip_board"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".boot_hdr.conf"), used))
+#elif defined(__ICCARM__)
+#pragma location = ".boot_hdr.conf"
+#endif
+
+const flexspi_nor_config_t qspiflash_config = {
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+            .sflashPadType    = kSerialFlash_4Pads,
+            .serialClkFreq    = kFlexSpiSerialClk_100MHz,
+            .sflashA1Size     = 8u * 1024u * 1024u,
+            .lookupTable =
+                {
+                    // Read LUTs
+                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
+                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
+                },
+        },
+    .pageSize           = 256u,
+    .sectorSize         = 4u * 1024u,
+    .blockSize          = 64u * 1024u,
+    .isUniformBlockSize = false,
+};
+#endif /* XIP_BOOT_HEADER_ENABLE */

board/TencentOS_tiny_EVB_AIoT/hello_world/board/xip/tosevbrt1062_flexspi_nor_config.h

@@ -0,0 +1,268 @@
+/*
+ * Copyright 2018-2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__
+#define __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_common.h"
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief XIP_BOARD driver version 2.0.1. */
+#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
+/*@}*/
+
+/* FLEXSPI memory config block related defintions */
+#define FLEXSPI_CFG_BLK_TAG     (0x42464346UL) // ascii "FCFB" Big Endian
+#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
+#define FLEXSPI_CFG_BLK_SIZE    (512)
+
+/* FLEXSPI Feature related definitions */
+#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
+
+/* Lookup table related defintions */
+#define CMD_INDEX_READ        0
+#define CMD_INDEX_READSTATUS  1
+#define CMD_INDEX_WRITEENABLE 2
+#define CMD_INDEX_WRITE       4
+
+#define CMD_LUT_SEQ_IDX_READ        0
+#define CMD_LUT_SEQ_IDX_READSTATUS  1
+#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
+#define CMD_LUT_SEQ_IDX_WRITE       9
+
+#define CMD_SDR        0x01
+#define CMD_DDR        0x21
+#define RADDR_SDR      0x02
+#define RADDR_DDR      0x22
+#define CADDR_SDR      0x03
+#define CADDR_DDR      0x23
+#define MODE1_SDR      0x04
+#define MODE1_DDR      0x24
+#define MODE2_SDR      0x05
+#define MODE2_DDR      0x25
+#define MODE4_SDR      0x06
+#define MODE4_DDR      0x26
+#define MODE8_SDR      0x07
+#define MODE8_DDR      0x27
+#define WRITE_SDR      0x08
+#define WRITE_DDR      0x28
+#define READ_SDR       0x09
+#define READ_DDR       0x29
+#define LEARN_SDR      0x0A
+#define LEARN_DDR      0x2A
+#define DATSZ_SDR      0x0B
+#define DATSZ_DDR      0x2B
+#define DUMMY_SDR      0x0C
+#define DUMMY_DDR      0x2C
+#define DUMMY_RWDS_SDR 0x0D
+#define DUMMY_RWDS_DDR 0x2D
+#define JMP_ON_CS      0x1F
+#define STOP           0
+
+#define FLEXSPI_1PAD 0
+#define FLEXSPI_2PAD 1
+#define FLEXSPI_4PAD 2
+#define FLEXSPI_8PAD 3
+
+#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                              \
+    (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
+     FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
+
+//!@brief Definitions for FlexSPI Serial Clock Frequency
+typedef enum _FlexSpiSerialClockFreq
+{
+    kFlexSpiSerialClk_30MHz  = 1,
+    kFlexSpiSerialClk_50MHz  = 2,
+    kFlexSpiSerialClk_60MHz  = 3,
+    kFlexSpiSerialClk_75MHz  = 4,
+    kFlexSpiSerialClk_80MHz  = 5,
+    kFlexSpiSerialClk_100MHz = 6,
+    kFlexSpiSerialClk_120MHz = 7,
+    kFlexSpiSerialClk_133MHz = 8,
+    kFlexSpiSerialClk_166MHz = 9,
+} flexspi_serial_clk_freq_t;
+
+//!@brief FlexSPI clock configuration type
+enum
+{
+    kFlexSpiClk_SDR, //!< Clock configure for SDR mode
+    kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
+};
+
+//!@brief FlexSPI Read Sample Clock Source definition
+typedef enum _FlashReadSampleClkSource
+{
+    kFlexSPIReadSampleClk_LoopbackInternally      = 0,
+    kFlexSPIReadSampleClk_LoopbackFromDqsPad      = 1,
+    kFlexSPIReadSampleClk_LoopbackFromSckPad      = 2,
+    kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
+} flexspi_read_sample_clk_t;
+
+//!@brief Misc feature bit definitions
+enum
+{
+    kFlexSpiMiscOffset_DiffClkEnable            = 0, //!< Bit for Differential clock enable
+    kFlexSpiMiscOffset_Ck2Enable                = 1, //!< Bit for CK2 enable
+    kFlexSpiMiscOffset_ParallelEnable           = 2, //!< Bit for Parallel mode enable
+    kFlexSpiMiscOffset_WordAddressableEnable    = 3, //!< Bit for Word Addressable enable
+    kFlexSpiMiscOffset_SafeConfigFreqEnable     = 4, //!< Bit for Safe Configuration Frequency enable
+    kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
+    kFlexSpiMiscOffset_DdrModeEnable            = 6, //!< Bit for DDR clock confiuration indication.
+};
+
+//!@brief Flash Type Definition
+enum
+{
+    kFlexSpiDeviceType_SerialNOR    = 1,    //!< Flash devices are Serial NOR
+    kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
+    kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
+    kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+};
+
+//!@brief Flash Pad Definitions
+enum
+{
+    kSerialFlash_1Pad  = 1,
+    kSerialFlash_2Pads = 2,
+    kSerialFlash_4Pads = 4,
+    kSerialFlash_8Pads = 8,
+};
+
+//!@brief FlexSPI LUT Sequence structure
+typedef struct _lut_sequence
+{
+    uint8_t seqNum; //!< Sequence Number, valid number: 1-16
+    uint8_t seqId;  //!< Sequence Index, valid number: 0-15
+    uint16_t reserved;
+} flexspi_lut_seq_t;
+
+//!@brief Flash Configuration Command Type
+enum
+{
+    kDeviceConfigCmdType_Generic,    //!< Generic command, for example: configure dummy cycles, drive strength, etc
+    kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
+    kDeviceConfigCmdType_Spi2Xpi,    //!< Switch from SPI to DPI/QPI/OPI mode
+    kDeviceConfigCmdType_Xpi2Spi,    //!< Switch from DPI/QPI/OPI to SPI mode
+    kDeviceConfigCmdType_Spi2NoCmd,  //!< Switch to 0-4-4/0-8-8 mode
+    kDeviceConfigCmdType_Reset,      //!< Reset device command
+};
+
+//!@brief FlexSPI Memory Configuration Block
+typedef struct _FlexSPIConfig
+{
+    uint32_t tag;               //!< [0x000-0x003] Tag, fixed value 0x42464346UL
+    uint32_t version;           //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
+    uint32_t reserved0;         //!< [0x008-0x00b] Reserved for future use
+    uint8_t readSampleClkSrc;   //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
+    uint8_t csHoldTime;         //!< [0x00d-0x00d] CS hold time, default value: 3
+    uint8_t csSetupTime;        //!< [0x00e-0x00e] CS setup time, default value: 3
+    uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
+    //! Serial NAND, need to refer to datasheet
+    uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
+    uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
+    //! Generic configuration, etc.
+    uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
+    //! DPI/QPI/OPI switch or reset command
+    flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
+    //! sequence number, [31:16] Reserved
+    uint32_t deviceModeArg;    //!< [0x018-0x01b] Argument/Parameter for device configuration
+    uint8_t configCmdEnable;   //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
+    uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
+    flexspi_lut_seq_t
+        configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
+    uint32_t reserved1;   //!< [0x02c-0x02f] Reserved for future use
+    uint32_t configCmdArgs[3];     //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
+    uint32_t reserved2;            //!< [0x03c-0x03f] Reserved for future use
+    uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
+    //! details
+    uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
+    uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    //! Chapter for more details
+    uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
+    //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
+    uint32_t reserved3[2];           //!< [0x048-0x04f] Reserved for future use
+    uint32_t sflashA1Size;           //!< [0x050-0x053] Size of Flash connected to A1
+    uint32_t sflashA2Size;           //!< [0x054-0x057] Size of Flash connected to A2
+    uint32_t sflashB1Size;           //!< [0x058-0x05b] Size of Flash connected to B1
+    uint32_t sflashB2Size;           //!< [0x05c-0x05f] Size of Flash connected to B2
+    uint32_t csPadSettingOverride;   //!< [0x060-0x063] CS pad setting override value
+    uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
+    uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
+    uint32_t dqsPadSettingOverride;  //!< [0x06c-0x06f] DQS pad setting override value
+    uint32_t timeoutInMs;            //!< [0x070-0x073] Timeout threshold for read status command
+    uint32_t commandInterval;        //!< [0x074-0x077] CS deselect interval between two commands
+    uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
+    uint16_t busyOffset;       //!< [0x07c-0x07d] Busy offset, valid value: 0-31
+    uint16_t busyBitPolarity;  //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
+    //! busy flag is 0 when flash device is busy
+    uint32_t lookupTable[64];           //!< [0x080-0x17f] Lookup table holds Flash command sequences
+    flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
+    uint32_t reserved4[4];              //!< [0x1b0-0x1bf] Reserved for future use
+} flexspi_mem_config_t;
+
+/*  */
+#define NOR_CMD_INDEX_READ        CMD_INDEX_READ        //!< 0
+#define NOR_CMD_INDEX_READSTATUS  CMD_INDEX_READSTATUS  //!< 1
+#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
+#define NOR_CMD_INDEX_ERASESECTOR 3                     //!< 3
+#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE       //!< 4
+#define NOR_CMD_INDEX_CHIPERASE   5                     //!< 5
+#define NOR_CMD_INDEX_DUMMY       6                     //!< 6
+#define NOR_CMD_INDEX_ERASEBLOCK  7                     //!< 7
+
+#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0  READ LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
+    CMD_LUT_SEQ_IDX_READSTATUS //!< 1  Read Status LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
+    2 //!< 2  Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
+    CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3  Write Enable sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
+    4 //!< 4  Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5  Erase Sector sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK  8 //!< 8 Erase Block sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
+    CMD_LUT_SEQ_IDX_WRITE                //!< 9  Program sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
+    14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
+    15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
+
+/*
+ *  Serial NOR configuration block
+ */
+typedef struct _flexspi_nor_config
+{
+    flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
+    uint32_t pageSize;              //!< Page size of Serial NOR
+    uint32_t sectorSize;            //!< Sector size of Serial NOR
+    uint8_t ipcmdSerialClkFreq;     //!< Clock frequency for IP command
+    uint8_t isUniformBlockSize;     //!< Sector/Block size is the same
+    uint8_t reserved0[2];           //!< Reserved for future use
+    uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
+    uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
+    uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint32_t blockSize;             //!< Block size
+    uint32_t reserve2[11];          //!< Reserved for future use
+} flexspi_nor_config_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */

board/TencentOS_tiny_EVB_AIoT/hello_world/main.c

@@ -0,0 +1,28 @@
+#include "mcu_init.h"
+
+#define APPLICATION_TASK_STK_SIZE       4096
+k_task_t application_task;
+uint8_t application_task_stk[APPLICATION_TASK_STK_SIZE];
+
+extern void application_entry(void *arg);
+
+#pragma weak application_entry
+void application_entry(void *arg)
+{
+    while (1) {
+        printf("This is a demo task,please use your task entry!\r\n");
+        tos_task_delay(1000);
+    }
+}
+
+int main(void)
+{
+    board_init();
+    PRINTF("Welcome to TencentOS tiny(%s)\r\n", TOS_VERSION);
+    tos_knl_init(); // TencentOS Tiny kernel initialize
+    tos_task_create(&application_task, "application_task", application_entry, NULL, 4, application_task_stk, APPLICATION_TASK_STK_SIZE, 0);
+    tos_knl_start();
+    
+    while (1);
+}
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/Abstract.txt

@@ -0,0 +1,4 @@
+CMSIS DSP_Lib example arm_class_marks_example for
+  Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
+
+The example is configured for uVision Simulator

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM0/startup_ARMCM0.s

@@ -0,0 +1,159 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    ( 22 * 4)                           ; Interrupts 10 .. 31 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM0/system_ARMCM0.c

@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM3/startup_ARMCM3.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM3/system_ARMCM3.c

@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c

@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c

@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/arm_class_marks_example.ini

@@ -0,0 +1,15 @@
+
+/* This file demonstrates how to Map memory ranges, specify read, write, and execute permissions
+
+   The file can be executed in the following way:
+   1) manually from uVision command window (in debug mode) using command:
+   INCLUIDE arm_class_marks_example.ini
+
+*/
+
+
+// usual initialisation for target setup
+MAP  0x00000000, 0x0003FFFF  EXEC READ      // 256K Flash
+MAP  0x20000000, 0x20007FFF  READ WRITE     //  32K RAM
+
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/arm_class_marks_example.uvoptx

@@ -0,0 +1,852 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>ARMCM0</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM0_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_class_marks_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM0$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>210</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>460</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_class_marks_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_class_marks_example\arm_class_marks_example_f32.c\210</Expression>
+        </Bp>
+      </Breakpoint>
+      <MemoryWindow1>
+        <Mm>
+          <WinNumber>1</WinNumber>
+          <SubType>2</SubType>
+          <ItemText>0x20001190</ItemText>
+          <AccSizeX>0</AccSizeX>
+        </Mm>
+      </MemoryWindow1>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM3</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM3_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_class_marks_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM3$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>210</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1220</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_class_marks_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_class_marks_example\arm_class_marks_example_f32.c\210</Expression>
+        </Bp>
+      </Breakpoint>
+      <MemoryWindow1>
+        <Mm>
+          <WinNumber>1</WinNumber>
+          <SubType>2</SubType>
+          <ItemText>0x20001190</ItemText>
+          <AccSizeX>0</AccSizeX>
+        </Mm>
+      </MemoryWindow1>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM4_FP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM4_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_class_marks_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM4_FP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>210</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1224</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_class_marks_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_class_marks_example\arm_class_marks_example_f32.c\210</Expression>
+        </Bp>
+      </Breakpoint>
+      <MemoryWindow1>
+        <Mm>
+          <WinNumber>1</WinNumber>
+          <SubType>2</SubType>
+          <ItemText>0x20001190</ItemText>
+          <AccSizeX>0</AccSizeX>
+        </Mm>
+      </MemoryWindow1>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM7_SP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM7_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_class_marks_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM7_SP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>210</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1224</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_class_marks_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_class_marks_example\arm_class_marks_example_f32.c\210</Expression>
+        </Bp>
+      </Breakpoint>
+      <MemoryWindow1>
+        <Mm>
+          <WinNumber>1</WinNumber>
+          <SubType>2</SubType>
+          <ItemText>0x20001190</ItemText>
+          <AccSizeX>0</AccSizeX>
+        </Mm>
+      </MemoryWindow1>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Files</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_class_marks_example_f32.c</PathWithFileName>
+      <FilenameWithoutPath>arm_class_marks_example_f32.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Documentation</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_class_marks_example/arm_class_marks_example_f32.c

@@ -0,0 +1,211 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+*
+* $Date:         17. January 2013
+* $Revision:     V1.4.0
+*
+* Project:       CMSIS DSP Library
+* Title:         arm_class_marks_example_f32.c
+*
+* Description:   Example code to calculate Minimum, Maximum
+*                Mean, std and variance of marks obtained in a class
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+/**
+ * @ingroup groupExamples
+ */
+
+/**
+ * @defgroup ClassMarks Class Marks Example
+ *
+ * \par Description:
+ * \par
+ * Demonstrates the use the Maximum, Minimum, Mean, Standard Deviation, Variance
+ * and Matrix functions to calculate statistical values of marks obtained in a class.
+ *
+ * \note This example also demonstrates the usage of static initialization.
+ *
+ * \par Variables Description:
+ * \par
+ * \li \c testMarks_f32 points to the marks scored by 20 students in 4 subjects
+ * \li \c max_marks     Maximum of all marks
+ * \li \c min_marks     Minimum of all marks
+ * \li \c mean          Mean of all marks
+ * \li \c var           Variance of the marks
+ * \li \c std           Standard deviation of the marks
+ * \li \c numStudents   Total number of students in the class
+ *
+ * \par CMSIS DSP Software Library Functions Used:
+ * \par
+ * - arm_mat_init_f32()
+ * - arm_mat_mult_f32()
+ * - arm_max_f32()
+ * - arm_min_f32()
+ * - arm_mean_f32()
+ * - arm_std_f32()
+ * - arm_var_f32()
+ *
+ * <b> Refer  </b>
+ * \link arm_class_marks_example_f32.c \endlink
+ *
+ */
+
+
+/** \example arm_class_marks_example_f32.c
+  */
+#include "arm_math.h"
+
+#define USE_STATIC_INIT
+
+ /* ----------------------------------------------------------------------
+** Global defines
+** ------------------------------------------------------------------- */
+
+#define TEST_LENGTH_SAMPLES   (20*4)
+
+/* ----------------------------------------------------------------------
+** List of Marks scored by 20 students for 4 subjects
+** ------------------------------------------------------------------- */
+const float32_t testMarks_f32[TEST_LENGTH_SAMPLES] =
+{
+  42.000000,  37.000000,  81.000000,  28.000000,
+  83.000000,  72.000000,  36.000000,  38.000000,
+  32.000000,  51.000000,  63.000000,  64.000000,
+  97.000000,  82.000000,  95.000000,  90.000000,
+  66.000000,  51.000000,  54.000000,  42.000000,
+  67.000000,  56.000000,  45.000000,  57.000000,
+  67.000000,  69.000000,  35.000000,  52.000000,
+  29.000000,  81.000000,  58.000000,  47.000000,
+  38.000000,  76.000000, 100.000000,  29.000000,
+  33.000000,  47.000000,  29.000000,  50.000000,
+  34.000000,  41.000000,  61.000000,  46.000000,
+  52.000000,  50.000000,  48.000000,  36.000000,
+  47.000000,  55.000000,  44.000000,  40.000000,
+ 100.000000,  94.000000,  84.000000,  37.000000,
+  32.000000,  71.000000,  47.000000,  77.000000,
+  31.000000,  50.000000,  49.000000,  35.000000,
+  63.000000,  67.000000,  40.000000,  31.000000,
+  29.000000,  68.000000,  61.000000,  38.000000,
+  31.000000,  28.000000,  28.000000,  76.000000,
+  55.000000,  33.000000,  29.000000,  39.000000
+};
+
+
+/* ----------------------------------------------------------------------
+* Number of subjects X 1
+* ------------------------------------------------------------------- */
+const float32_t testUnity_f32[4] =
+{
+  1.000,  1.000,   1.000,  1.000
+};
+
+
+/* ----------------------------------------------------------------------
+** f32 Output buffer
+** ------------------------------------------------------------------- */
+static float32_t testOutput[TEST_LENGTH_SAMPLES];
+
+
+/* ------------------------------------------------------------------
+* Global defines
+*------------------------------------------------------------------- */
+#define   NUMSTUDENTS  20
+#define     NUMSUBJECTS  4
+
+/* ------------------------------------------------------------------
+* Global variables
+*------------------------------------------------------------------- */
+
+ uint32_t    numStudents = 20;
+ uint32_t    numSubjects = 4;
+float32_t    max_marks, min_marks, mean, std, var;
+ uint32_t    student_num;
+
+/* ----------------------------------------------------------------------------------
+* Main f32 test function.  It returns maximum marks secured and student number
+* ------------------------------------------------------------------------------- */
+
+int32_t main()
+{
+
+#ifndef  USE_STATIC_INIT
+
+  arm_matrix_instance_f32 srcA;
+  arm_matrix_instance_f32 srcB;
+  arm_matrix_instance_f32 dstC;
+
+  /* Input and output matrices initializations */
+  arm_mat_init_f32(&srcA, numStudents, numSubjects, (float32_t *)testMarks_f32);
+  arm_mat_init_f32(&srcB, numSubjects, 1, (float32_t *)testUnity_f32);
+  arm_mat_init_f32(&dstC, numStudents, 1, testOutput);
+
+#else
+
+  /* Static Initializations of Input and output matrix sizes and array */
+  arm_matrix_instance_f32 srcA = {NUMSTUDENTS, NUMSUBJECTS, (float32_t *)testMarks_f32};
+  arm_matrix_instance_f32 srcB = {NUMSUBJECTS, 1, (float32_t *)testUnity_f32};
+  arm_matrix_instance_f32 dstC = {NUMSTUDENTS, 1, testOutput};
+
+#endif
+
+
+  /* ----------------------------------------------------------------------
+  *Call the Matrix multiplication process function
+  * ------------------------------------------------------------------- */
+  arm_mat_mult_f32(&srcA, &srcB, &dstC);
+
+  /* ----------------------------------------------------------------------
+  ** Call the Max function to calculate max marks among numStudents
+  ** ------------------------------------------------------------------- */
+  arm_max_f32(testOutput, numStudents, &max_marks, &student_num);
+
+  /* ----------------------------------------------------------------------
+  ** Call the Min function to calculate min marks among numStudents
+  ** ------------------------------------------------------------------- */
+  arm_min_f32(testOutput, numStudents, &min_marks, &student_num);
+
+  /* ----------------------------------------------------------------------
+  ** Call the Mean function to calculate mean
+  ** ------------------------------------------------------------------- */
+  arm_mean_f32(testOutput, numStudents, &mean);
+
+  /* ----------------------------------------------------------------------
+  ** Call the std function to calculate standard deviation
+  ** ------------------------------------------------------------------- */
+  arm_std_f32(testOutput, numStudents, &std);
+
+  /* ----------------------------------------------------------------------
+  ** Call the var function to calculate variance
+  ** ------------------------------------------------------------------- */
+  arm_var_f32(testOutput, numStudents, &var);
+
+  while (1);                             /* main function does not return */
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/Abstract.txt

@@ -0,0 +1,4 @@
+CMSIS DSP_Lib example arm_convolution_example for
+  Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
+
+The example is configured for uVision Simulator.

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM0/startup_ARMCM0.s

@@ -0,0 +1,159 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    ( 22 * 4)                           ; Interrupts 10 .. 31 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM0/system_ARMCM0.c

@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM3/startup_ARMCM3.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM3/system_ARMCM3.c

@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c

@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c

@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/arm_convolution_example.ini

@@ -0,0 +1,15 @@
+
+/* This file demonstrates how to Map memory ranges, specify read, write, and execute permissions
+
+   The file can be executed in the following way:
+   1) manually from uVision command window (in debug mode) using command:
+   INCLUIDE arm_convolution_example.ini
+
+*/
+
+
+// usual initialisation for target setup
+MAP  0x00000000, 0x0003FFFF  EXEC READ      // 256K Flash
+MAP  0x20000000, 0x20007FFF  READ WRITE     //  32K RAM
+
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/arm_convolution_example.uvoptx

@@ -0,0 +1,896 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>ARMCM0</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM0_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_convolution_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM0$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>241</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1722</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\241</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>244</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1726</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\244</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM3</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM3_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_convolution_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM3$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>244</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2464</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\244</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>241</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2460</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\241</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM4_FP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM4_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_convolution_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM4_FP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>244</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2800</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\244</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>241</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2796</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\241</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM7_SP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM7_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_convolution_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM7_SP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>241</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2796</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\241</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>244</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2800</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_convolution_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_convolution_example\arm_convolution_example_f32.c\244</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Files</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\math_helper.c</PathWithFileName>
+      <FilenameWithoutPath>math_helper.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_convolution_example_f32.c</PathWithFileName>
+      <FilenameWithoutPath>arm_convolution_example_f32.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Documentation</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/arm_convolution_example_f32.c

@@ -0,0 +1,247 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+*
+* $Date:         17. January 2013
+* $Revision:     V1.4.0
+*
+* Project:       CMSIS DSP Library
+* Title:         arm_convolution_example_f32.c
+*
+* Description:   Example code demonstrating Convolution of two input signals using fft.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+/**
+ * @ingroup groupExamples
+ */
+
+/**
+ * @defgroup ConvolutionExample Convolution Example
+ *
+ * \par Description:
+ * \par
+ * Demonstrates the convolution theorem with the use of the Complex FFT, Complex-by-Complex
+ * Multiplication, and Support Functions.
+ *
+ * \par Algorithm:
+ * \par
+ * The convolution theorem states that convolution in the time domain corresponds to
+ * multiplication in the frequency domain. Therefore, the Fourier transform of the convoution of
+ * two signals is equal to the product of their individual Fourier transforms.
+ * The Fourier transform of a signal can be evaluated efficiently using the Fast Fourier Transform (FFT).
+ * \par
+ * Two input signals, <code>a[n]</code> and <code>b[n]</code>, with lengths \c n1 and \c n2 respectively,
+ * are zero padded so that their lengths become \c N, which is greater than or equal to <code>(n1+n2-1)</code>
+ * and is a power of 4 as FFT implementation is radix-4.
+ * The convolution of <code>a[n]</code> and <code>b[n]</code> is obtained by taking the FFT of the input
+ * signals, multiplying the Fourier transforms of the two signals, and taking the inverse FFT of
+ * the multiplied result.
+ * \par
+ * This is denoted by the following equations:
+ * <pre> A[k] = FFT(a[n],N)
+ * B[k] = FFT(b[n],N)
+ * conv(a[n], b[n]) = IFFT(A[k] * B[k], N)</pre>
+ * where <code>A[k]</code> and <code>B[k]</code> are the N-point FFTs of the signals <code>a[n]</code>
+ * and <code>b[n]</code> respectively.
+ * The length of the convolved signal is <code>(n1+n2-1)</code>.
+ *
+ * \par Block Diagram:
+ * \par
+ * \image html Convolution.gif
+ *
+ * \par Variables Description:
+ * \par
+ * \li \c testInputA_f32 points to the first input sequence
+ * \li \c srcALen length of the first input sequence
+ * \li \c testInputB_f32 points to the second input sequence
+ * \li \c srcBLen length of the second input sequence
+ * \li \c outLen length of convolution output sequence, <code>(srcALen + srcBLen - 1)</code>
+ * \li \c AxB points to the output array where the product of individual FFTs of inputs is stored.
+ *
+ * \par CMSIS DSP Software Library Functions Used:
+ * \par
+ * - arm_fill_f32()
+ * - arm_copy_f32()
+ * - arm_cfft_radix4_init_f32()
+ * - arm_cfft_radix4_f32()
+ * - arm_cmplx_mult_cmplx_f32()
+ *
+ * <b> Refer  </b>
+ * \link arm_convolution_example_f32.c \endlink
+ *
+ */
+
+
+/** \example arm_convolution_example_f32.c
+  */
+
+#include "arm_math.h"
+#include "math_helper.h"
+
+/* ----------------------------------------------------------------------
+* Defines each of the tests performed
+* ------------------------------------------------------------------- */
+#define MAX_BLOCKSIZE   128
+#define DELTA           (0.000001f)
+#define SNR_THRESHOLD   90
+
+/* ----------------------------------------------------------------------
+* Declare I/O buffers
+* ------------------------------------------------------------------- */
+float32_t Ak[MAX_BLOCKSIZE];        /* Input A */
+float32_t Bk[MAX_BLOCKSIZE];        /* Input B */
+float32_t AxB[MAX_BLOCKSIZE * 2];   /* Output */
+
+/* ----------------------------------------------------------------------
+* Test input data for Floating point Convolution example for 32-blockSize
+* Generated by the MATLAB randn() function
+* ------------------------------------------------------------------- */
+float32_t testInputA_f32[64] =
+{
+  -0.808920,   1.357369,   1.180861,  -0.504544,   1.762637,  -0.703285,
+   1.696966,   0.620571,  -0.151093,  -0.100235,  -0.872382,  -0.403579,
+  -0.860749,  -0.382648,  -1.052338,   0.128113,  -0.646269,   1.093377,
+  -2.209198,   0.471706,   0.408901,   1.266242,   0.598252,   1.176827,
+  -0.203421,   0.213596,  -0.851964,  -0.466958,   0.021841,  -0.698938,
+  -0.604107,   0.461778,  -0.318219,   0.942520,   0.577585,   0.417619,
+   0.614665,   0.563679,  -1.295073,  -0.764437,   0.952194,  -0.859222,
+  -0.618554,  -2.268542,  -1.210592,   1.655853,  -2.627219,  -0.994249,
+  -1.374704,   0.343799,   0.025619,   1.227481,  -0.708031,   0.069355,
+  -1.845228,  -1.570886,   1.010668,  -1.802084,   1.630088,   1.286090,
+  -0.161050,  -0.940794,   0.367961,   0.291907
+
+};
+
+float32_t testInputB_f32[64] =
+{
+   0.933724,   0.046881,   1.316470,   0.438345,   0.332682,   2.094885,
+   0.512081,   0.035546,   0.050894,  -2.320371,   0.168711,  -1.830493,
+  -0.444834,  -1.003242,  -0.531494,  -1.365600,  -0.155420,  -0.757692,
+  -0.431880,  -0.380021,   0.096243,  -0.695835,   0.558850,  -1.648962,
+   0.020369,  -0.363630,   0.887146,   0.845503,  -0.252864,  -0.330397,
+   1.269131,  -1.109295,  -1.027876,   0.135940,   0.116721,  -0.293399,
+  -1.349799,   0.166078,  -0.802201,   0.369367,  -0.964568,  -2.266011,
+   0.465178,   0.651222,  -0.325426,   0.320245,  -0.784178,  -0.579456,
+   0.093374,   0.604778,  -0.048225,   0.376297,  -0.394412,   0.578182,
+  -1.218141,  -1.387326,   0.692462,  -0.631297,   0.153137,  -0.638952,
+  0.635474,   -0.970468,   1.334057,  -0.111370
+};
+
+const float testRefOutput_f32[127] =
+{
+   -0.818943,    1.229484,  -0.533664,    1.016604,   0.341875,  -1.963656,
+    5.171476,    3.478033,   7.616361,    6.648384,   0.479069,   1.792012,
+   -1.295591,   -7.447818,   0.315830,  -10.657445,  -2.483469,  -6.524236,
+   -7.380591,   -3.739005,  -8.388957,    0.184147,  -1.554888,   3.786508,
+   -1.684421,    5.400610,  -1.578126,    7.403361,   8.315999,   2.080267,
+   11.077776,    2.749673,   7.138962,    2.748762,   0.660363,   0.981552,
+    1.442275,    0.552721,  -2.576892,    4.703989,   0.989156,   8.759344,
+   -0.564825,   -3.994680,   0.954710,   -5.014144,   6.592329,   1.599488,
+  -13.979146,   -0.391891,  -4.453369,   -2.311242,  -2.948764,   1.761415,
+   -0.138322,   10.433007,  -2.309103,    4.297153,   8.535523,   3.209462,
+    8.695819,    5.569919,   2.514304,    5.582029,   2.060199,   0.642280,
+    7.024616,    1.686615,  -6.481756,    1.343084,  -3.526451,   1.099073,
+   -2.965764,   -0.173723,  -4.111484,    6.528384,  -6.965658,   1.726291,
+    1.535172,   11.023435,   2.338401,   -4.690188,   1.298210,   3.943885,
+    8.407885,    5.168365,   0.684131,    1.559181,   1.859998,   2.852417,
+    8.574070,   -6.369078,   6.023458,   11.837963,  -6.027632,   4.469678,
+   -6.799093,   -2.674048,   6.250367,   -6.809971,  -3.459360,   9.112410,
+   -2.711621,   -1.336678,   1.564249,   -1.564297,  -1.296760,   8.904013,
+   -3.230109,    6.878013,  -7.819823,    3.369909,  -1.657410,  -2.007358,
+   -4.112825,    1.370685,  -3.420525,   -6.276605,   3.244873,  -3.352638,
+    1.545372,    0.902211,   0.197489,   -1.408732,   0.523390,   0.348440, 0
+};
+
+
+/* ----------------------------------------------------------------------
+* Declare Global variables
+* ------------------------------------------------------------------- */
+uint32_t srcALen = 64;   /* Length of Input A */
+uint32_t srcBLen = 64;   /* Length of Input B */
+uint32_t outLen;         /* Length of convolution output */
+float32_t snr;           /* output SNR */
+
+int32_t main(void)
+{
+  arm_status status;                           /* Status of the example */
+  arm_cfft_radix4_instance_f32 cfft_instance;  /* CFFT Structure instance */
+
+  /* CFFT Structure instance pointer */
+  arm_cfft_radix4_instance_f32 *cfft_instance_ptr =
+      (arm_cfft_radix4_instance_f32*) &cfft_instance;
+
+  /* output length of convolution */
+  outLen = srcALen + srcBLen - 1;
+
+  /* Initialise the fft input buffers with all zeros */
+  arm_fill_f32(0.0,  Ak, MAX_BLOCKSIZE);
+  arm_fill_f32(0.0,  Bk, MAX_BLOCKSIZE);
+
+  /* Copy the input values to the fft input buffers */
+  arm_copy_f32(testInputA_f32,  Ak, MAX_BLOCKSIZE/2);
+  arm_copy_f32(testInputB_f32,  Bk, MAX_BLOCKSIZE/2);
+
+  /* Initialize the CFFT function to compute 64 point fft */
+  status = arm_cfft_radix4_init_f32(cfft_instance_ptr, 64, 0, 1);
+
+  /* Transform input a[n] from time domain to frequency domain A[k] */
+  arm_cfft_radix4_f32(cfft_instance_ptr, Ak);
+  /* Transform input b[n] from time domain to frequency domain B[k] */
+  arm_cfft_radix4_f32(cfft_instance_ptr, Bk);
+
+  /* Complex Multiplication of the two input buffers in frequency domain */
+  arm_cmplx_mult_cmplx_f32(Ak, Bk, AxB, MAX_BLOCKSIZE/2);
+
+  /* Initialize the CIFFT function to compute 64 point ifft */
+  status = arm_cfft_radix4_init_f32(cfft_instance_ptr, 64, 1, 1);
+
+  /* Transform the multiplication output from frequency domain to time domain,
+     that gives the convolved output  */
+  arm_cfft_radix4_f32(cfft_instance_ptr, AxB);
+
+  /* SNR Calculation */
+  snr = arm_snr_f32((float32_t *)testRefOutput_f32, AxB, srcALen + srcBLen - 1);
+
+  /* Compare the SNR with threshold to test whether the
+     computed output is matched with the reference output values. */
+  if ( snr > SNR_THRESHOLD)
+  {
+    status = ARM_MATH_SUCCESS;
+  }
+
+  if ( status != ARM_MATH_SUCCESS)
+  {
+    while (1);
+  }
+
+  while (1);                             /* main function does not return */
+}
+
+ /** \endlink */

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/math_helper.c

@@ -0,0 +1,466 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+*
+* $Date:        17. January 2013
+* $Revision: 	V1.4.0  b
+*
+* Project: 	    CMSIS DSP Library
+*
+* Title:	    math_helper.c
+*
+* Description:	Definition of all helper functions required.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+/* ----------------------------------------------------------------------
+*		Include standard header files
+* -------------------------------------------------------------------- */
+#include<math.h>
+
+/* ----------------------------------------------------------------------
+*		Include project header files
+* -------------------------------------------------------------------- */
+#include "math_helper.h"
+
+/**
+ * @brief  Caluclation of SNR
+ * @param[in]  pRef 	Pointer to the reference buffer
+ * @param[in]  pTest	Pointer to the test buffer
+ * @param[in]  buffSize	total number of samples
+ * @return     SNR
+ * The function Caluclates signal to noise ratio for the reference output
+ * and test output
+ */
+
+float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize)
+{
+  float EnergySignal = 0.0, EnergyError = 0.0;
+  uint32_t i;
+  float SNR;
+  int temp;
+  int *test;
+
+  for (i = 0; i < buffSize; i++)
+    {
+ 	  /* Checking for a NAN value in pRef array */
+	  test =   (int *)(&pRef[i]);
+      temp =  *test;
+
+	  if (temp == 0x7FC00000)
+	  {
+	  		return(0);
+	  }
+
+	  /* Checking for a NAN value in pTest array */
+	  test =   (int *)(&pTest[i]);
+      temp =  *test;
+
+	  if (temp == 0x7FC00000)
+	  {
+	  		return(0);
+	  }
+      EnergySignal += pRef[i] * pRef[i];
+      EnergyError += (pRef[i] - pTest[i]) * (pRef[i] - pTest[i]);
+    }
+
+	/* Checking for a NAN value in EnergyError */
+	test =   (int *)(&EnergyError);
+    temp =  *test;
+
+    if (temp == 0x7FC00000)
+    {
+  		return(0);
+    }
+
+
+  SNR = 10 * log10 (EnergySignal / EnergyError);
+
+  return (SNR);
+
+}
+
+
+/**
+ * @brief  Provide guard bits for Input buffer
+ * @param[in,out]  input_buf   Pointer to input buffer
+ * @param[in]       blockSize  block Size
+ * @param[in]       guard_bits guard bits
+ * @return none
+ * The function Provides the guard bits for the buffer
+ * to avoid overflow
+ */
+
+void arm_provide_guard_bits_q15 (q15_t * input_buf, uint32_t blockSize,
+                            uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < blockSize; i++)
+    {
+      input_buf[i] = input_buf[i] >> guard_bits;
+    }
+}
+
+/**
+ * @brief  Converts float to fixed in q12.20 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to outputbuffer
+ * @param[in]  numSamples  number of samples in the input buffer
+ * @return none
+ * The function converts floating point values to fixed point(q12.20) values
+ */
+
+void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 1048576.0f corresponds to pow(2, 20) */
+      pOut[i] = (q31_t) (pIn[i] * 1048576.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 1.0)
+        {
+          pOut[i] = 0x000FFFFF;
+        }
+    }
+}
+
+/**
+ * @brief  Compare MATLAB Reference Output and ARM Test output
+ * @param[in]  pIn         Pointer to Ref buffer
+ * @param[in]  pOut        Pointer to Test buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return maximum difference
+ */
+
+uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+  int32_t diff, diffCrnt = 0;
+  uint32_t maxDiff = 0;
+
+  for (i = 0; i < numSamples; i++)
+  {
+  	diff = pIn[i] - pOut[i];
+  	diffCrnt = (diff > 0) ? diff : -diff;
+
+	if (diffCrnt > maxDiff)
+	{
+		maxDiff = diffCrnt;
+	}
+  }
+
+  return(maxDiff);
+}
+
+/**
+ * @brief  Compare MATLAB Reference Output and ARM Test output
+ * @param[in]  pIn         Pointer to Ref buffer
+ * @param[in]  pOut        Pointer to Test buffer
+ * @param[in]  numSamples number of samples in the buffer
+ * @return maximum difference
+ */
+
+uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t * pOut, uint32_t numSamples)
+{
+  uint32_t i;
+  int32_t diff, diffCrnt = 0;
+  uint32_t maxDiff = 0;
+
+  for (i = 0; i < numSamples; i++)
+  {
+  	diff = pIn[i] - pOut[i];
+  	diffCrnt = (diff > 0) ? diff : -diff;
+
+	if (diffCrnt > maxDiff)
+	{
+		maxDiff = diffCrnt;
+	}
+  }
+
+  return(maxDiff);
+}
+
+/**
+ * @brief  Provide guard bits for Input buffer
+ * @param[in,out]  input_buf   Pointer to input buffer
+ * @param[in]       blockSize  block Size
+ * @param[in]       guard_bits guard bits
+ * @return none
+ * The function Provides the guard bits for the buffer
+ * to avoid overflow
+ */
+
+void arm_provide_guard_bits_q31 (q31_t * input_buf,
+								 uint32_t blockSize,
+                                 uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < blockSize; i++)
+    {
+      input_buf[i] = input_buf[i] >> guard_bits;
+    }
+}
+
+/**
+ * @brief  Provide guard bits for Input buffer
+ * @param[in,out]  input_buf   Pointer to input buffer
+ * @param[in]       blockSize  block Size
+ * @param[in]       guard_bits guard bits
+ * @return none
+ * The function Provides the guard bits for the buffer
+ * to avoid overflow
+ */
+
+void arm_provide_guard_bits_q7 (q7_t * input_buf,
+								uint32_t blockSize,
+                                uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < blockSize; i++)
+    {
+      input_buf[i] = input_buf[i] >> guard_bits;
+    }
+}
+
+
+
+/**
+ * @brief  Caluclates number of guard bits
+ * @param[in]  num_adds 	number of additions
+ * @return guard bits
+ * The function Caluclates the number of guard bits
+ * depending on the numtaps
+ */
+
+uint32_t arm_calc_guard_bits (uint32_t num_adds)
+{
+  uint32_t i = 1, j = 0;
+
+  if (num_adds == 1)
+    {
+      return (0);
+    }
+
+  while (i < num_adds)
+    {
+      i = i * 2;
+      j++;
+    }
+
+  return (j);
+}
+
+/**
+ * @brief  Apply guard bits to buffer
+ * @param[in,out]  pIn         pointer to input buffer
+ * @param[in]      numSamples  number of samples in the input buffer
+ * @param[in]      guard_bits  guard bits
+ * @return none
+ */
+
+void arm_apply_guard_bits (float32_t *pIn,
+						   uint32_t numSamples,
+						   uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+      pIn[i] = pIn[i] * arm_calc_2pow(guard_bits);
+    }
+}
+
+/**
+ * @brief  Calculates pow(2, numShifts)
+ * @param[in]  numShifts 	number of shifts
+ * @return pow(2, numShifts)
+ */
+uint32_t arm_calc_2pow(uint32_t numShifts)
+{
+
+  uint32_t i, val = 1;
+
+  for (i = 0; i < numShifts; i++)
+    {
+      val = val * 2;
+    }
+
+  return(val);
+}
+
+
+
+/**
+ * @brief  Converts float to fixed q14
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q14 (float *pIn, q15_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 16384.0f corresponds to pow(2, 14) */
+      pOut[i] = (q15_t) (pIn[i] * 16384.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 2.0)
+        {
+          pOut[i] = 0x7FFF;
+        }
+
+    }
+
+}
+
+
+/**
+ * @brief  Converts float to fixed q30 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q30 (float *pIn, q31_t * pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 1073741824.0f corresponds to pow(2, 30) */
+      pOut[i] = (q31_t) (pIn[i] * 1073741824.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 2.0)
+        {
+          pOut[i] = 0x7FFFFFFF;
+        }
+    }
+}
+
+/**
+ * @brief  Converts float to fixed q30 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q29 (float *pIn, q31_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 1073741824.0f corresponds to pow(2, 30) */
+      pOut[i] = (q31_t) (pIn[i] * 536870912.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 4.0)
+        {
+          pOut[i] = 0x7FFFFFFF;
+        }
+    }
+}
+
+
+/**
+ * @brief  Converts float to fixed q28 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q28 (float *pIn, q31_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	/* 268435456.0f corresponds to pow(2, 28) */
+      pOut[i] = (q31_t) (pIn[i] * 268435456.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 8.0)
+        {
+          pOut[i] = 0x7FFFFFFF;
+        }
+    }
+}
+
+/**
+ * @brief  Clip the float values to +/- 1
+ * @param[in,out]  pIn           input buffer
+ * @param[in]      numSamples    number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_clip_f32 (float *pIn, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+      if (pIn[i] > 1.0f)
+	  {
+	    pIn[i] = 1.0;
+	  }
+	  else if ( pIn[i] < -1.0f)
+	  {
+	    pIn[i] = -1.0;
+	  }
+
+    }
+}
+
+
+
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_convolution_example/math_helper.h

@@ -0,0 +1,63 @@
+/* ----------------------------------------------------------------------   
+* Copyright (C) 2010-2013 ARM Limited. All rights reserved.   
+*   
+* $Date:        17. January 2013  
+* $Revision: 	V1.4.0   
+*  
+* Project: 	    CMSIS DSP Library 
+*
+* Title:	    math_helper.h
+* 
+* Description:	Prototypes of all helper functions required.  
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*  
+* Redistribution and use in source and binary forms, with or without 
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the 
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.  
+* -------------------------------------------------------------------- */
+
+
+#include "arm_math.h"
+
+#ifndef MATH_HELPER_H
+#define MATH_HELPER_H
+
+float arm_snr_f32(float *pRef, float *pTest,  uint32_t buffSize);  
+void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
+void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
+void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
+void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
+void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
+void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
+void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
+void arm_clip_f32(float *pIn, uint32_t numSamples);
+uint32_t arm_calc_guard_bits(uint32_t num_adds);
+void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
+uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
+uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
+uint32_t arm_calc_2pow(uint32_t guard_bits);
+#endif
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/Abstract.txt

@@ -0,0 +1,4 @@
+CMSIS DSP_Lib example arm_dotproduct_example for
+  Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
+
+The example is configured for uVision Simulator.

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM0/startup_ARMCM0.s

@@ -0,0 +1,159 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    ( 22 * 4)                           ; Interrupts 10 .. 31 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM0/system_ARMCM0.c

@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM3/startup_ARMCM3.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM3/system_ARMCM3.c

@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c

@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c

@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/arm_dotproduct_example.ini

@@ -0,0 +1,13 @@
+
+/* This file demonstrates how to Map memory ranges, specify read, write, and execute permissions
+
+   The file can be executed in the following way:
+   1) manually from uVision command window (in debug mode) using command:
+   INCLUIDE arm_dotproduct_example.ini
+
+*/
+
+// usual initialisation for target setup
+MAP  0x00000000, 0x0003FFFF  EXEC READ      // 256K Flash
+MAP  0x20000000, 0x20007FFF  READ WRITE     //  32K RAM
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/arm_dotproduct_example.uvoptx

@@ -0,0 +1,884 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>ARMCM0</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM0_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_dotproduct_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM0$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>175</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>444</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\175</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>172</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>440</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\172</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM3</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM3_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_dotproduct_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM3$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>175</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1200</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\175</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>172</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1196</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\172</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM4_FP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM4_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>1</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_dotproduct_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM4_FP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>175</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1216</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\175</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>172</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1212</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\172</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM7_SP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM7_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>1</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_dotproduct_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM7_SP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>175</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1216</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\175</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>172</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1212</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_dotproduct_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_dotproduct_example\arm_dotproduct_example_f32.c\172</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Files</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_dotproduct_example_f32.c</PathWithFileName>
+      <FilenameWithoutPath>arm_dotproduct_example_f32.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Documentation</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_dotproduct_example/arm_dotproduct_example_f32.c

@@ -0,0 +1,178 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+*
+* $Date:         17. January 2013
+* $Revision:     V1.4.0
+*
+* Project:       CMSIS DSP Library
+* Title:         arm_dotproduct_example_f32.c
+*
+* Description:   Example code computing dot product of two vectors.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ * @ingroup groupExamples
+ */
+
+/**
+ * @defgroup DotproductExample Dot Product Example
+ *
+ * \par Description:
+ * \par
+ * Demonstrates the use of the Multiply and Add functions to perform the dot product.
+ * The dot product of two vectors is obtained by multiplying corresponding elements
+ * and summing the products.
+
+ * \par Algorithm:
+ * \par
+ * The two input vectors \c A and \c B with length \c n, are multiplied element-by-element
+ * and then added to obtain dot product.
+ * \par
+ * This is denoted by the following equation:
+ *         <pre>  dotProduct = A[0] * B[0] + A[1] * B[1] + ... + A[n-1] * B[n-1]</pre>
+ *
+ * \par Block Diagram:
+ * \par
+ * \image html dotProduct.gif
+ *
+ * \par Variables Description:
+ * \par
+ * \li \c srcA_buf_f32 points to first input vector
+ * \li \c srcB_buf_f32 points to second input vector
+ * \li \c testOutput   stores dot product of the two input vectors.
+ *
+ * \par CMSIS DSP Software Library Functions Used:
+ * \par
+ * - arm_mult_f32()
+ * - arm_add_f32()
+ *
+ * <b> Refer  </b>
+ * \link arm_dotproduct_example_f32.c \endlink
+ *
+ */
+
+
+/** \example arm_dotproduct_example_f32.c
+  */
+
+#include <math.h>
+#include "arm_math.h"
+
+/* ----------------------------------------------------------------------
+* Defines each of the tests performed
+* ------------------------------------------------------------------- */
+#define MAX_BLOCKSIZE     32
+#define DELTA           (0.000001f)
+
+/* ----------------------------------------------------------------------
+* Test input data for Floating point Dot Product example for 32-blockSize
+* Generated by the MATLAB randn() function
+* ------------------------------------------------------------------- */
+/* ----------------------------------------------------------------------
+** Test input data of srcA for blockSize 32
+** ------------------------------------------------------------------- */
+float32_t srcA_buf_f32[MAX_BLOCKSIZE] =
+{
+  -0.4325648115282207,  -1.6655843782380970,  0.1253323064748307,
+   0.2876764203585489,  -1.1464713506814637,  1.1909154656429988,
+   1.1891642016521031,  -0.0376332765933176,  0.3272923614086541,
+   0.1746391428209245,  -0.1867085776814394,  0.7257905482933027,
+  -0.5883165430141887,   2.1831858181971011, -0.1363958830865957,
+   0.1139313135208096,   1.0667682113591888,  0.0592814605236053,
+  -0.0956484054836690,  -0.8323494636500225,  0.2944108163926404,
+  -1.3361818579378040,   0.7143245518189522,  1.6235620644462707,
+  -0.6917757017022868,   0.8579966728282626,  1.2540014216025324,
+  -1.5937295764474768,  -1.4409644319010200,  0.5711476236581780,
+  -0.3998855777153632,   0.6899973754643451
+};
+
+/* ----------------------------------------------------------------------
+** Test input data of srcB for blockSize 32
+** ------------------------------------------------------------------- */
+float32_t srcB_buf_f32[MAX_BLOCKSIZE] =
+{
+   1.7491401329284098,  0.1325982188803279,   0.3252281811989881,
+  -0.7938091410349637,  0.3149236145048914,  -0.5272704888029532,
+   0.9322666565031119,  1.1646643544607362,  -2.0456694357357357,
+  -0.6443728590041911,  1.7410657940825480,   0.4867684246821860,
+   1.0488288293660140,  1.4885752747099299,   1.2705014969484090,
+  -1.8561241921210170,  2.1343209047321410,   1.4358467535865909,
+  -0.9173023332875400, -1.1060770780029008,   0.8105708062681296,
+   0.6985430696369063, -0.4015827425012831,   1.2687512030669628,
+  -0.7836083053674872,  0.2132664971465569,   0.7878984786088954,
+   0.8966819356782295, -0.1869172943544062,   1.0131816724341454,
+   0.2484350696132857,  0.0596083377937976
+};
+
+/* Reference dot product output */
+float32_t  refDotProdOut = 5.9273644806352142;
+
+/* ----------------------------------------------------------------------
+* Declare Global variables
+* ------------------------------------------------------------------- */
+float32_t multOutput[MAX_BLOCKSIZE];  /* Intermediate output */
+float32_t testOutput;  /* Final ouput */
+
+arm_status status;   /* Status of the example */
+
+int32_t main(void)
+{
+  uint32_t i;       /* Loop counter */
+  float32_t diff;     /* Difference between reference and test outputs */
+
+  /* Multiplication of two input buffers */
+  arm_mult_f32(srcA_buf_f32, srcB_buf_f32, multOutput, MAX_BLOCKSIZE);
+
+  /* Accumulate the multiplication output values to
+     get the dot product of the two inputs */
+  for(i=0; i< MAX_BLOCKSIZE; i++)
+  {
+    arm_add_f32(&testOutput, &multOutput[i], &testOutput, 1);
+  }
+
+  /* absolute value of difference between ref and test */
+  diff = fabsf(refDotProdOut - testOutput);
+
+  /* Comparison of dot product value with reference */
+  if (diff > DELTA)
+  {
+    status = ARM_MATH_TEST_FAILURE;
+  }
+
+  if ( status == ARM_MATH_TEST_FAILURE)
+  {
+    while (1);
+  }
+
+  while (1);                             /* main function does not return */
+}
+
+ /** \endlink */

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/Abstract.txt

@@ -0,0 +1,4 @@
+CMSIS DSP_Lib example arm_fft_bin_example for
+  Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
+
+The example is configured for uVision Simulator.

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM0/startup_ARMCM0.s

@@ -0,0 +1,159 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    ( 22 * 4)                           ; Interrupts 10 .. 31 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM0/system_ARMCM0.c

@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM3/startup_ARMCM3.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM3/system_ARMCM3.c

@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c

@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c

@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/arm_fft_bin_data.c

@@ -0,0 +1,308 @@
+/* ----------------------------------------------------------------------   
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.   
+*   
+* $Date:        17. January 2013  
+* $Revision: 	V1.4.0   
+*   
+* Project: 	    CMSIS DSP Library   
+* Title:	     	arm_fft_bin_data.c
+*   
+* Description:	 Data file used for example code
+*   
+* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
+*  
+* Redistribution and use in source and binary forms, with or without 
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the 
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.  
+ * -------------------------------------------------------------------- */
+
+#include "arm_math.h"
+
+/* ----------------------------------------------------------------------
+Test Input signal contains 10KHz signal + Uniformly distributed white noise
+** ------------------------------------------------------------------- */
+
+float32_t testInput_f32_10khz[2048] = 
+{   
+-0.865129623056441, 	0.000000000000000, 	-2.655020678073846, 	0.000000000000000, 	0.600664612949661, 	0.000000000000000, 	0.080378093886515, 	0.000000000000000, 	
+-2.899160484012034, 	0.000000000000000, 	2.563004262857762, 	0.000000000000000, 	3.078328403304206, 	0.000000000000000, 	0.105906778385130, 	0.000000000000000, 	
+0.048366940168201, 	0.000000000000000, 	-0.145696461188734, 	0.000000000000000, 	-0.023417155362879, 	0.000000000000000, 	2.127729174988954, 	0.000000000000000, 	
+-1.176633086028377, 	0.000000000000000, 	3.690223557991855, 	0.000000000000000, 	-0.622791766173194, 	0.000000000000000, 	0.722837373872203, 	0.000000000000000, 	
+2.739754205367484, 	0.000000000000000, 	-0.062610410524552, 	0.000000000000000, 	-0.891296810967338, 	0.000000000000000, 	-1.845872258871811, 	0.000000000000000, 	
+1.195039415434387, 	0.000000000000000, 	-2.177388969045026, 	0.000000000000000, 	1.078649103637905, 	0.000000000000000, 	2.570976050490193, 	0.000000000000000, 	
+-1.383551403404574, 	0.000000000000000, 	2.392141424058873, 	0.000000000000000, 	2.858002843205065, 	0.000000000000000, 	-3.682433899725536, 	0.000000000000000, 	
+-3.488146646451150, 	0.000000000000000, 	1.323468578888120, 	0.000000000000000, 	-0.099771155430726, 	0.000000000000000, 	1.561168082500454, 	0.000000000000000, 	
+1.025026795103179, 	0.000000000000000, 	0.928841900171200, 	0.000000000000000, 	2.930499509864950, 	0.000000000000000, 	2.013349089766430, 	0.000000000000000, 	
+2.381676148486737, 	0.000000000000000, 	-3.081062307950236, 	0.000000000000000, 	-0.389579115537544, 	0.000000000000000, 	0.181540149166620, 	0.000000000000000, 	
+-2.601953341353208, 	0.000000000000000, 	0.333435137783218, 	0.000000000000000, 	-2.812945856162965, 	0.000000000000000, 	2.649109640172910, 	0.000000000000000, 	
+-1.003963025744654, 	0.000000000000000, 	1.552460768755035, 	0.000000000000000, 	0.088641345335247, 	0.000000000000000, 	-2.519951327113426, 	0.000000000000000, 	
+-4.341348988610527, 	0.000000000000000, 	0.557772429359965, 	0.000000000000000, 	-1.671267412948494, 	0.000000000000000, 	0.733951350960387, 	0.000000000000000, 	
+0.409263788034864, 	0.000000000000000, 	3.566033071952806, 	0.000000000000000, 	1.882565173848352, 	0.000000000000000, 	-1.106017073793287, 	0.000000000000000, 	
+0.154456720778718, 	0.000000000000000, 	-2.513205795512153, 	0.000000000000000, 	0.310978660939421, 	0.000000000000000, 	0.579706500111723, 	0.000000000000000, 	
+0.000086383683251, 	0.000000000000000, 	-1.311866980897721, 	0.000000000000000, 	1.840007477574986, 	0.000000000000000, 	-3.253005768451345, 	0.000000000000000, 	
+1.462584328739432, 	0.000000000000000, 	1.610103610851738, 	0.000000000000000, 	0.761914676858907, 	0.000000000000000, 	0.974541361089834, 	0.000000000000000, 	
+0.686845845885983, 	0.000000000000000, 	1.849153122025191, 	0.000000000000000, 	0.787800410401453, 	0.000000000000000, 	-1.187438909666279, 	0.000000000000000, 	
+-0.754937911044720, 	0.000000000000000, 	0.084373858395232, 	0.000000000000000, 	-2.600269011710521, 	0.000000000000000, 	-0.962982842142644, 	0.000000000000000, 	
+-0.369328108540868, 	0.000000000000000, 	0.810791418361879, 	0.000000000000000, 	3.587016488699641, 	0.000000000000000, 	-0.520776145083723, 	0.000000000000000, 	
+0.640249919627884, 	0.000000000000000, 	1.103122489464969, 	0.000000000000000, 	2.231779881455556, 	0.000000000000000, 	-1.308035392685241, 	0.000000000000000, 	
+0.424070304330106, 	0.000000000000000, 	-0.200383932651189, 	0.000000000000000, 	-2.365526783356541, 	0.000000000000000, 	-0.989114757436628, 	0.000000000000000, 	
+2.770807688959777, 	0.000000000000000, 	-0.444172737462307, 	0.000000000000000, 	0.079760979374078, 	0.000000000000000, 	-0.005199118412183, 	0.000000000000000, 	
+-0.664712668309527, 	0.000000000000000, 	-0.624171857561896, 	0.000000000000000, 	0.537306979007338, 	0.000000000000000, 	-2.575955675497642, 	0.000000000000000, 	
+1.562363235756780, 	0.000000000000000, 	1.814069369848895, 	0.000000000000000, 	-1.293428583392509, 	0.000000000000000, 	-1.026188449495686, 	0.000000000000000, 	
+-2.981771815588717, 	0.000000000000000, 	-4.223468103075124, 	0.000000000000000, 	2.672674782004045, 	0.000000000000000, 	-0.856096801117735, 	0.000000000000000, 	
+0.048517345512563, 	0.000000000000000, 	-0.026860721136222, 	0.000000000000000, 	0.392932277758187, 	0.000000000000000, 	-1.331740855093099, 	0.000000000000000, 	
+-1.894292129477081, 	0.000000000000000, 	-1.425006468460681, 	0.000000000000000, 	-2.721772427617057, 	0.000000000000000, 	-1.616831100216806, 	0.000000000000000, 	
+3.551177651488947, 	0.000000000000000, 	-0.069685667896087, 	0.000000000000000, 	-3.134634907409102, 	0.000000000000000, 	-0.263627598944639, 	0.000000000000000, 	
+-1.650469945991350, 	0.000000000000000, 	-2.203580339374399, 	0.000000000000000, 	-0.872203246123242, 	0.000000000000000, 	1.230782812607287, 	0.000000000000000, 	
+0.257288860093291, 	0.000000000000000, 	1.989083106173137, 	0.000000000000000, 	-1.985638729453261, 	0.000000000000000, 	-1.416185105842892, 	0.000000000000000, 	
+-1.131097688325772, 	0.000000000000000, 	-2.245130805416057, 	0.000000000000000, 	-1.938873996219074, 	0.000000000000000, 	2.043608361562645, 	0.000000000000000, 	
+-0.583727989880841, 	0.000000000000000, 	-1.785266378212929, 	0.000000000000000, 	1.961457586224753, 	0.000000000000000, 	1.139400099963223, 	0.000000000000000, 	
+-1.979519343363991, 	0.000000000000000, 	2.003023322818429, 	0.000000000000000, 	0.229004069076829, 	0.000000000000000, 	3.452808862193135, 	0.000000000000000, 	
+2.882273808365857, 	0.000000000000000, 	-1.549450501844438, 	0.000000000000000, 	-3.283872089931876, 	0.000000000000000, 	-0.327025884099064, 	0.000000000000000, 	
+-0.054979977136430, 	0.000000000000000, 	-1.192280531479012, 	0.000000000000000, 	0.645539328365578, 	0.000000000000000, 	2.300832863404618, 	0.000000000000000, 	
+-1.092951789535240, 	0.000000000000000, 	-1.017368249363773, 	0.000000000000000, 	-0.142673056169787, 	0.000000000000000, 	0.831073544881250, 	0.000000000000000, 	
+-2.314612531587064, 	0.000000000000000, 	-2.221456299106321, 	0.000000000000000, 	0.460261143885226, 	0.000000000000000, 	0.050585301888595, 	0.000000000000000, 	
+0.364373329183988, 	0.000000000000000, 	-1.685956552069538, 	0.000000000000000, 	0.050664512351055, 	0.000000000000000, 	-0.193355783902718, 	0.000000000000000, 	
+-0.158660446046828, 	0.000000000000000, 	2.394156453841953, 	0.000000000000000, 	-1.562965718554525, 	0.000000000000000, 	-2.199750600869900, 	0.000000000000000, 	
+1.544984022381773, 	0.000000000000000, 	-1.988307216807315, 	0.000000000000000, 	-0.628240722541046, 	0.000000000000000, 	-1.436235771505429, 	0.000000000000000, 	
+1.677013691147313, 	0.000000000000000, 	1.600741781678228, 	0.000000000000000, 	-0.757380959134706, 	0.000000000000000, 	-4.784797439515566, 	0.000000000000000, 	
+0.265121462834569, 	0.000000000000000, 	3.862029485934378, 	0.000000000000000, 	2.386823577249430, 	0.000000000000000, 	-3.655779745436893, 	0.000000000000000, 	
+-0.763541621368016, 	0.000000000000000, 	-1.182140388432962, 	0.000000000000000, 	-1.349106114858063, 	0.000000000000000, 	-2.287533624396759, 	0.000000000000000, 	
+-0.028603745188423, 	0.000000000000000, 	-1.353580755934427, 	0.000000000000000, 	0.461602380352937, 	0.000000000000000, 	-0.059599055078928, 	0.000000000000000, 	
+-0.929946734342228, 	0.000000000000000, 	0.065773089295561, 	0.000000000000000, 	1.106565863102982, 	0.000000000000000, 	4.719295086373593, 	0.000000000000000, 	
+-2.108377703544395, 	0.000000000000000, 	-2.226393620240159, 	0.000000000000000, 	1.375668397437521, 	0.000000000000000, 	-0.960772428525443, 	0.000000000000000, 	
+-2.156313465390571, 	0.000000000000000, 	1.126060012375311, 	0.000000000000000, 	2.756485137030720, 	0.000000000000000, 	0.739639690862600, 	0.000000000000000, 	
+3.914769510295006, 	0.000000000000000, 	1.685232785586675, 	0.000000000000000, 	4.079058040970612, 	0.000000000000000, 	-1.174598301660513, 	0.000000000000000, 	
+-2.885776587275580, 	0.000000000000000, 	-0.241073635188767, 	0.000000000000000, 	3.080489872502403, 	0.000000000000000, 	-2.051244183999421, 	0.000000000000000, 	
+0.664330486845139, 	0.000000000000000, 	-1.697798999370016, 	0.000000000000000, 	1.452369423649782, 	0.000000000000000, 	-1.523532831019280, 	0.000000000000000, 	
+0.171981186587481, 	0.000000000000000, 	-4.685274721583927, 	0.000000000000000, 	-1.336175835319380, 	0.000000000000000, 	1.419070770428945, 	0.000000000000000, 	
+-0.035791601713475, 	0.000000000000000, 	2.291937971632081, 	0.000000000000000, 	-1.962559313450293, 	0.000000000000000, 	-4.831595589339301, 	0.000000000000000, 	
+-1.857055284000925, 	0.000000000000000, 	2.606271522635512, 	0.000000000000000, 	-0.576447978738030, 	0.000000000000000, 	0.082299166967720, 	0.000000000000000, 	
+1.888399453494614, 	0.000000000000000, 	-3.564705298046079, 	0.000000000000000, 	-0.939357831083889, 	0.000000000000000, 	-1.903578203697778, 	0.000000000000000, 	
+-2.642492215447250, 	0.000000000000000, 	-0.182990405251017, 	0.000000000000000, 	3.742026478011174, 	0.000000000000000, 	0.104295803798333, 	0.000000000000000, 	
+1.848678195370347, 	0.000000000000000, 	-1.887384346896369, 	0.000000000000000, 	0.365048973046045, 	0.000000000000000, 	-0.889638010354219, 	0.000000000000000, 	
+1.173877118428863, 	0.000000000000000, 	-1.178562827540109, 	0.000000000000000, 	0.610271645685184, 	0.000000000000000, 	1.831284815697871, 	0.000000000000000, 	
+0.449575390102283, 	0.000000000000000, 	1.597171905253443, 	0.000000000000000, 	3.918574971904773, 	0.000000000000000, 	0.868104027970404, 	0.000000000000000, 	
+0.582643134746494, 	0.000000000000000, 	2.321256382353331, 	0.000000000000000, 	-0.238118642223180, 	0.000000000000000, 	-2.890287868054370, 	0.000000000000000, 	
+0.970995414625622, 	0.000000000000000, 	0.666137930891283, 	0.000000000000000, 	-0.202435718709502, 	0.000000000000000, 	2.057930200518194, 	0.000000000000000, 	
+3.120583443719949, 	0.000000000000000, 	-0.863945271701041, 	0.000000000000000, 	0.906848893874630, 	0.000000000000000, 	-1.434124930222570, 	0.000000000000000, 	
+0.754659384848783, 	0.000000000000000, 	-5.224154442713778, 	0.000000000000000, 	2.330229744098967, 	0.000000000000000, 	1.113946320164698, 	0.000000000000000, 	
+0.523324920322840, 	0.000000000000000, 	1.750740911548348, 	0.000000000000000, 	-0.899333972913577, 	0.000000000000000, 	0.228705845203506, 	0.000000000000000, 	
+-1.934782624767648, 	0.000000000000000, 	-3.508386237231303, 	0.000000000000000, 	-2.107108523073510, 	0.000000000000000, 	0.380587645474815, 	0.000000000000000, 	
+-0.476200877183279, 	0.000000000000000, 	-2.172086712642198, 	0.000000000000000, 	1.795372535780299, 	0.000000000000000, 	-2.100318983391055, 	0.000000000000000, 	
+-0.022571122461405, 	0.000000000000000, 	0.674514020010955, 	0.000000000000000, 	-0.148872569390857, 	0.000000000000000, 	0.298175890592737, 	0.000000000000000, 	
+-1.134244492493590, 	0.000000000000000, 	-3.146848422289455, 	0.000000000000000, 	-1.357950199087602, 	0.000000000000000, 	0.667362732020878, 	0.000000000000000, 	
+-3.119397998316724, 	0.000000000000000, 	-1.189341126297637, 	0.000000000000000, 	-1.532744386856668, 	0.000000000000000, 	-1.672972484202534, 	0.000000000000000, 	
+-2.042283373871558, 	0.000000000000000, 	-1.479481547595924, 	0.000000000000000, 	-0.002668662875396, 	0.000000000000000, 	0.262737760129546, 	0.000000000000000, 	
+2.734456080621830, 	0.000000000000000, 	-0.671945925075102, 	0.000000000000000, 	-3.735078262179111, 	0.000000000000000, 	-0.161705013319883, 	0.000000000000000, 	
+0.748963512361001, 	0.000000000000000, 	1.128046374367600, 	0.000000000000000, 	0.649651335592966, 	0.000000000000000, 	1.880020215025867, 	0.000000000000000, 	
+-1.095632293842306, 	0.000000000000000, 	1.197764876160487, 	0.000000000000000, 	0.323646656252985, 	0.000000000000000, 	-1.655502751114502, 	0.000000000000000, 	
+3.666399062961496, 	0.000000000000000, 	-0.334060899735197, 	0.000000000000000, 	-2.119056978738397, 	0.000000000000000, 	3.721375117275012, 	0.000000000000000, 	
+0.044874186872307, 	0.000000000000000, 	-2.733053897593234, 	0.000000000000000, 	1.590700278891042, 	0.000000000000000, 	3.215711772781902, 	0.000000000000000, 	
+-1.792085012843801, 	0.000000000000000, 	-0.405797188885475, 	0.000000000000000, 	-0.628080020080892, 	0.000000000000000, 	-1.831815840843960, 	0.000000000000000, 	
+2.973656862522834, 	0.000000000000000, 	-0.212032655138417, 	0.000000000000000, 	0.372437389437234, 	0.000000000000000, 	-1.614030579023492, 	0.000000000000000, 	
+-0.704900996358698, 	0.000000000000000, 	1.123700273452105, 	0.000000000000000, 	-0.136371848130819, 	0.000000000000000, 	3.020284357635585, 	0.000000000000000, 	
+-0.550211350877649, 	0.000000000000000, 	5.101256236381711, 	0.000000000000000, 	3.367051512192333, 	0.000000000000000, 	-4.385131946669234, 	0.000000000000000, 	
+-3.967303337694391, 	0.000000000000000, 	-0.965894936640022, 	0.000000000000000, 	0.328366945264681, 	0.000000000000000, 	0.199041562924914, 	0.000000000000000, 	
+1.067681999025495, 	0.000000000000000, 	-1.939516091697170, 	0.000000000000000, 	-1.092980954328824, 	0.000000000000000, 	0.273786079368066, 	0.000000000000000, 	
+-0.040928322190265, 	0.000000000000000, 	-0.118368078577437, 	0.000000000000000, 	1.766589628899997, 	0.000000000000000, 	1.738321311635393, 	0.000000000000000, 	
+-2.895012794321649, 	0.000000000000000, 	1.213521771395142, 	0.000000000000000, 	0.922971726633985, 	0.000000000000000, 	1.091516563636489, 	0.000000000000000, 	
+3.226378465469620, 	0.000000000000000, 	1.149169778666974, 	0.000000000000000, 	-1.695986327709386, 	0.000000000000000, 	-0.974803077355813, 	0.000000000000000, 	
+-4.898035507513607, 	0.000000000000000, 	1.622719302889447, 	0.000000000000000, 	0.583891313586579, 	0.000000000000000, 	-1.677182424094957, 	0.000000000000000, 	
+-1.915633132814685, 	0.000000000000000, 	-1.980150370851616, 	0.000000000000000, 	0.604538269404190, 	0.000000000000000, 	0.939862406149365, 	0.000000000000000, 	
+-1.266939874246416, 	0.000000000000000, 	-1.494771249200063, 	0.000000000000000, 	0.278042784093988, 	0.000000000000000, 	0.326627416008916, 	0.000000000000000, 	
+-1.914530157643303, 	0.000000000000000, 	1.908947721862196, 	0.000000000000000, 	0.531819285694044, 	0.000000000000000, 	3.056856632319658, 	0.000000000000000, 	
+-0.389241827774643, 	0.000000000000000, 	-2.418606606780420, 	0.000000000000000, 	0.915299238878703, 	0.000000000000000, 	-0.098774174295283, 	0.000000000000000, 	
+-0.906199428444304, 	0.000000000000000, 	0.316716451217743, 	0.000000000000000, 	-4.367700643578311, 	0.000000000000000, 	1.491687997515293, 	0.000000000000000, 	
+-1.962381126288365, 	0.000000000000000, 	-0.700829196527045, 	0.000000000000000, 	3.028958963615630, 	0.000000000000000, 	-2.313461067462598, 	0.000000000000000, 	
+-1.431933239886712, 	0.000000000000000, 	-0.831153039725342, 	0.000000000000000, 	3.939495598250743, 	0.000000000000000, 	0.342974753984771, 	0.000000000000000, 	
+-2.768330763002974, 	0.000000000000000, 	-2.744010370019008, 	0.000000000000000, 	3.821352685212561, 	0.000000000000000, 	4.551065271455856, 	0.000000000000000, 	
+3.270136437041298, 	0.000000000000000, 	-3.188028411950982, 	0.000000000000000, 	-0.777075012417436, 	0.000000000000000, 	0.097110650265216, 	0.000000000000000, 	
+1.221216137608812, 	0.000000000000000, 	-1.325824244541822, 	0.000000000000000, 	-2.655296734084113, 	0.000000000000000, 	-1.074792144885704, 	0.000000000000000, 	
+2.770401584439407, 	0.000000000000000, 	5.240270645610543, 	0.000000000000000, 	0.108576672208892, 	0.000000000000000, 	-1.209394350650142, 	0.000000000000000, 	
+1.403344353838785, 	0.000000000000000, 	-0.299032904177277, 	0.000000000000000, 	4.074959450638227, 	0.000000000000000, 	1.718727473952107, 	0.000000000000000, 	
+-3.061349227080806, 	0.000000000000000, 	-1.158596888541269, 	0.000000000000000, 	3.381858904662625, 	0.000000000000000, 	0.957339964054052, 	0.000000000000000, 	
+0.179900074904899, 	0.000000000000000, 	-3.909641902506081, 	0.000000000000000, 	0.805717289408649, 	0.000000000000000, 	2.047413793928261, 	0.000000000000000, 	
+-1.273580225826614, 	0.000000000000000, 	-2.681359186869971, 	0.000000000000000, 	-0.721241345822093, 	0.000000000000000, 	-1.613090681569475, 	0.000000000000000, 	
+0.463138804815955, 	0.000000000000000, 	0.377223507800954, 	0.000000000000000, 	2.046550684968141, 	0.000000000000000, 	0.178508732797712, 	0.000000000000000, 	
+-0.477815330358845, 	0.000000000000000, 	3.763355908332053, 	0.000000000000000, 	1.300430303035163, 	0.000000000000000, 	-0.214625793857725, 	0.000000000000000, 	
+1.343267891864081, 	0.000000000000000, 	-0.340007682433245, 	0.000000000000000, 	2.062703194680005, 	0.000000000000000, 	0.042032160234235, 	0.000000000000000, 	
+0.643732569732250, 	0.000000000000000, 	-1.913502543857589, 	0.000000000000000, 	3.771340762937158, 	0.000000000000000, 	1.050024807363386, 	0.000000000000000, 	
+-4.440489488592649, 	0.000000000000000, 	0.444904302066643, 	0.000000000000000, 	2.898702265650048, 	0.000000000000000, 	1.953232980548558, 	0.000000000000000, 	
+2.761564952735079, 	0.000000000000000, 	1.963537633260397, 	0.000000000000000, 	-2.168858472916215, 	0.000000000000000, 	-4.116235357699841, 	0.000000000000000, 	
+4.183678271896528, 	0.000000000000000, 	0.600422284944681, 	0.000000000000000, 	-0.659352647255126, 	0.000000000000000, 	-0.993127338218109, 	0.000000000000000, 	
+-2.463571314945747, 	0.000000000000000, 	0.937720951545881, 	0.000000000000000, 	-3.098957308429730, 	0.000000000000000, 	-2.354719140045463, 	0.000000000000000, 	
+-0.417285119323949, 	0.000000000000000, 	2.187974075975947, 	0.000000000000000, 	1.101468905172585, 	0.000000000000000, 	-3.185800678152109, 	0.000000000000000, 	
+2.357534709345083, 	0.000000000000000, 	0.246645606729407, 	0.000000000000000, 	4.440905650784504, 	0.000000000000000, 	-2.236807716637866, 	0.000000000000000, 	
+-2.171481518317550, 	0.000000000000000, 	-2.029571795072690, 	0.000000000000000, 	0.135599790431348, 	0.000000000000000, 	-1.277965265520191, 	0.000000000000000, 	
+-1.927976233157507, 	0.000000000000000, 	-5.434492783745394, 	0.000000000000000, 	-2.026375829312657, 	0.000000000000000, 	1.009666016819321, 	0.000000000000000, 	
+0.238549782367247, 	0.000000000000000, 	-0.516403923971309, 	0.000000000000000, 	-0.933977817429352, 	0.000000000000000, 	0.155803015935614, 	0.000000000000000, 	
+-0.396194809997929, 	0.000000000000000, 	-0.915178100253214, 	0.000000000000000, 	0.666329367985015, 	0.000000000000000, 	-1.517991149945785, 	0.000000000000000, 	
+0.458266744144822, 	0.000000000000000, 	-1.242845974381418, 	0.000000000000000, 	0.057914823556477, 	0.000000000000000, 	0.994101307476875, 	0.000000000000000, 	
+-2.387209849199325, 	0.000000000000000, 	0.459297048883826, 	0.000000000000000, 	0.227711405683905, 	0.000000000000000, 	0.030255073506117, 	0.000000000000000, 	
+-1.323361608181337, 	0.000000000000000, 	-4.650244457426706, 	0.000000000000000, 	0.062908579526021, 	0.000000000000000, 	3.462831028244432, 	0.000000000000000, 	
+1.303608183314856, 	0.000000000000000, 	-1.430415193881612, 	0.000000000000000, 	-1.672886118942142, 	0.000000000000000, 	0.992890699210099, 	0.000000000000000, 	
+-0.160814531784247, 	0.000000000000000, 	-1.238132939350430, 	0.000000000000000, 	-0.589223271459376, 	0.000000000000000, 	2.326363810561534, 	0.000000000000000, 	
+-4.433789496230785, 	0.000000000000000, 	1.664686987538929, 	0.000000000000000, 	-2.366128834617921, 	0.000000000000000, 	1.212421570743837, 	0.000000000000000, 	
+-4.847914267690055, 	0.000000000000000, 	0.228485221404712, 	0.000000000000000, 	0.466139765470957, 	0.000000000000000, 	-1.344202776943546, 	0.000000000000000, 	
+-1.012053673330574, 	0.000000000000000, 	-2.844980626424742, 	0.000000000000000, 	-1.552703722026340, 	0.000000000000000, 	-1.448830983885038, 	0.000000000000000, 	
+0.127010756753980, 	0.000000000000000, 	-1.667188263752299, 	0.000000000000000, 	3.424818052085100, 	0.000000000000000, 	0.956291135453840, 	0.000000000000000, 	
+-3.725533331754662, 	0.000000000000000, 	-1.584534272368832, 	0.000000000000000, 	-1.654148210472472, 	0.000000000000000, 	0.701610500675698, 	0.000000000000000, 	
+0.164954538683927, 	0.000000000000000, 	-0.739260064712987, 	0.000000000000000, 	-2.167324026090101, 	0.000000000000000, 	-0.310240491909496, 	0.000000000000000, 	
+-2.281790349106906, 	0.000000000000000, 	1.719655331305361, 	0.000000000000000, 	-2.997005923606441, 	0.000000000000000, 	-1.999301431556852, 	0.000000000000000, 	
+-0.292229010068828, 	0.000000000000000, 	1.172317994855851, 	0.000000000000000, 	0.196734885241533, 	0.000000000000000, 	2.981365193477068, 	0.000000000000000, 	
+2.637726016926352, 	0.000000000000000, 	1.434045125217982, 	0.000000000000000, 	0.883627180451827, 	0.000000000000000, 	-1.434040761445747, 	0.000000000000000, 	
+-1.528891971086553, 	0.000000000000000, 	-3.306913135367542, 	0.000000000000000, 	-0.399059265470646, 	0.000000000000000, 	-0.265674394285178, 	0.000000000000000, 	
+3.502591252855384, 	0.000000000000000, 	0.830301156604454, 	0.000000000000000, 	-0.220021317046083, 	0.000000000000000, 	-0.090553770476646, 	0.000000000000000, 	
+0.771863477047951, 	0.000000000000000, 	1.351209629105760, 	0.000000000000000, 	3.773699756201963, 	0.000000000000000, 	0.472600118752329, 	0.000000000000000, 	
+2.332825668012222, 	0.000000000000000, 	1.853747950314528, 	0.000000000000000, 	0.759515251766178, 	0.000000000000000, 	1.327112776215496, 	0.000000000000000, 	
+2.518730296237868, 	0.000000000000000, 	0.764450208786353, 	0.000000000000000, 	-0.278275349491296, 	0.000000000000000, 	-0.041559465082020, 	0.000000000000000, 	
+1.387166083167787, 	0.000000000000000, 	2.612996769598122, 	0.000000000000000, 	-0.385404831721799, 	0.000000000000000, 	2.005630016170309, 	0.000000000000000, 	
+-0.950500047307998, 	0.000000000000000, 	-1.166884021392492, 	0.000000000000000, 	1.432973552928162, 	0.000000000000000, 	2.540370505384567, 	0.000000000000000, 	
+-1.140505295054501, 	0.000000000000000, 	-3.673358835201185, 	0.000000000000000, 	-0.450691288038056, 	0.000000000000000, 	1.601024294408014, 	0.000000000000000, 	
+0.773213556014045, 	0.000000000000000, 	2.973873693246168, 	0.000000000000000, 	-1.361548406382279, 	0.000000000000000, 	1.409136332424815, 	0.000000000000000, 	
+-0.963382518314713, 	0.000000000000000, 	-2.031268227368161, 	0.000000000000000, 	0.983309972085586, 	0.000000000000000, 	-3.461412488471631, 	0.000000000000000, 	
+-2.601124929406039, 	0.000000000000000, 	-0.533896239766343, 	0.000000000000000, 	-2.627129008866350, 	0.000000000000000, 	0.622111169161305, 	0.000000000000000, 	
+-1.160926365580422, 	0.000000000000000, 	-2.406196188132628, 	0.000000000000000, 	-1.076870362758737, 	0.000000000000000, 	-1.791866820937175, 	0.000000000000000, 	
+-0.749453071522325, 	0.000000000000000, 	-5.324156615990973, 	0.000000000000000, 	-1.038698022238289, 	0.000000000000000, 	-2.106629944730630, 	0.000000000000000, 	
+0.659295598564773, 	0.000000000000000, 	0.520940881580988, 	0.000000000000000, 	-0.055649203928700, 	0.000000000000000, 	0.292096765423137, 	0.000000000000000, 	
+-4.663743901790872, 	0.000000000000000, 	-0.125066503391666, 	0.000000000000000, 	-2.452620252445380, 	0.000000000000000, 	-0.712128227397468, 	0.000000000000000, 	
+-0.048938037970968, 	0.000000000000000, 	-1.821520226003361, 	0.000000000000000, 	0.810106421304257, 	0.000000000000000, 	-0.196636623956257, 	0.000000000000000, 	
+-0.701769836763804, 	0.000000000000000, 	2.460345045649201, 	0.000000000000000, 	3.506597671641116, 	0.000000000000000, 	-2.711322611972225, 	0.000000000000000, 	
+-0.658079876600542, 	0.000000000000000, 	-2.040082099646173, 	0.000000000000000, 	2.201668355395807, 	0.000000000000000, 	1.181507395879711, 	0.000000000000000, 	
+-1.640739552179682, 	0.000000000000000, 	-1.613393726467190, 	0.000000000000000, 	-1.156741241731352, 	0.000000000000000, 	2.527773464519963, 	0.000000000000000, 	
+-0.497040638009502, 	0.000000000000000, 	-0.975817112895589, 	0.000000000000000, 	-2.866830755546166, 	0.000000000000000, 	1.120214498507878, 	0.000000000000000, 	
+5.986771654661698, 	0.000000000000000, 	0.398219252656757, 	0.000000000000000, 	-3.545606013198135, 	0.000000000000000, 	0.312398099396191, 	0.000000000000000, 	
+-2.265327979531788, 	0.000000000000000, 	0.792121001107366, 	0.000000000000000, 	-3.736145137670100, 	0.000000000000000, 	0.762228883650802, 	0.000000000000000, 	
+2.283545661214646, 	0.000000000000000, 	3.780020629583529, 	0.000000000000000, 	3.117260228608810, 	0.000000000000000, 	-2.011159255609613, 	0.000000000000000, 	
+0.279107700476072, 	0.000000000000000, 	2.003369134246936, 	0.000000000000000, 	-1.448171234480257, 	0.000000000000000, 	0.584697150310140, 	0.000000000000000, 	
+0.919508663636197, 	0.000000000000000, 	-3.071349141675388, 	0.000000000000000, 	-1.555923649263667, 	0.000000000000000, 	2.232497079438850, 	0.000000000000000, 	
+-0.012662139119883, 	0.000000000000000, 	0.372825540734715, 	0.000000000000000, 	2.378543590847629, 	0.000000000000000, 	1.459053407813062, 	0.000000000000000, 	
+-0.967913907390927, 	0.000000000000000, 	1.322825200678212, 	0.000000000000000, 	-1.033775820061824, 	0.000000000000000, 	-1.813629552693142, 	0.000000000000000, 	
+4.794348161661486, 	0.000000000000000, 	0.655279811518676, 	0.000000000000000, 	-2.224590138589720, 	0.000000000000000, 	0.595329481295766, 	0.000000000000000, 	
+3.364055988866225, 	0.000000000000000, 	1.863416422998127, 	0.000000000000000, 	1.930305751828105, 	0.000000000000000, 	-0.284467053432545, 	0.000000000000000, 	
+-0.923374905878938, 	0.000000000000000, 	1.922988234041399, 	0.000000000000000, 	0.310482143432719, 	0.000000000000000, 	0.332122302397134, 	0.000000000000000, 	
+-1.659487472408966, 	0.000000000000000, 	-1.865943507877961, 	0.000000000000000, 	-0.186775297569864, 	0.000000000000000, 	-1.700543850628361, 	0.000000000000000, 	
+0.497157959366735, 	0.000000000000000, 	-0.471244843957418, 	0.000000000000000, 	-0.432013753969948, 	0.000000000000000, 	-4.000189880113231, 	0.000000000000000, 	
+-0.415335170016467, 	0.000000000000000, 	0.317311950972859, 	0.000000000000000, 	0.038393428927595, 	0.000000000000000, 	0.177219909465206, 	0.000000000000000, 	
+0.531650958095143, 	0.000000000000000, 	-2.711644985175806, 	0.000000000000000, 	0.328744077805156, 	0.000000000000000, 	-0.938417707547928, 	0.000000000000000, 	
+0.970379584897379, 	0.000000000000000, 	1.873649473917137, 	0.000000000000000, 	0.177938226987023, 	0.000000000000000, 	0.155609346302393, 	0.000000000000000, 	
+-1.276504241867208, 	0.000000000000000, 	-0.463725075928807, 	0.000000000000000, 	-0.064748250389500, 	0.000000000000000, 	-1.725568534062385, 	0.000000000000000, 	
+-0.139066584804067, 	0.000000000000000, 	1.975514554117767, 	0.000000000000000, 	-0.807063199499478, 	0.000000000000000, 	-0.326926659682788, 	0.000000000000000, 	
+1.445727032487938, 	0.000000000000000, 	-0.597151107739100, 	0.000000000000000, 	2.732557531709386, 	0.000000000000000, 	-2.907130934109188, 	0.000000000000000, 	
+-1.461264832679981, 	0.000000000000000, 	-1.708588604968163, 	0.000000000000000, 	3.652851925431363, 	0.000000000000000, 	0.682050868282879, 	0.000000000000000, 	
+-0.281312579963294, 	0.000000000000000, 	0.554966483307825, 	0.000000000000000, 	-0.981341739340932, 	0.000000000000000, 	1.279543331141603, 	0.000000000000000, 	
+0.036589747826856, 	0.000000000000000, 	2.312073745896073, 	0.000000000000000, 	1.754682200732425, 	0.000000000000000, 	-0.957515875428627, 	0.000000000000000, 	
+-0.833596942819695, 	0.000000000000000, 	0.437054368791033, 	0.000000000000000, 	-0.898819399360279, 	0.000000000000000, 	-0.296050580896839, 	0.000000000000000, 	
+-0.785144257649601, 	0.000000000000000, 	-2.541503089003311, 	0.000000000000000, 	2.225075846758761, 	0.000000000000000, 	-1.587290487902002, 	0.000000000000000, 	
+-1.421404172056462, 	0.000000000000000, 	-3.015149802293631, 	0.000000000000000, 	1.780874288867949, 	0.000000000000000, 	-0.865812740882613, 	0.000000000000000, 	
+-2.845327531197112, 	0.000000000000000, 	1.445225867774367, 	0.000000000000000, 	2.183733236584647, 	0.000000000000000, 	1.163371072749080, 	0.000000000000000, 	
+0.883547693520409, 	0.000000000000000, 	-1.224093106684675, 	0.000000000000000, 	-1.854501116331044, 	0.000000000000000, 	1.783082089255796, 	0.000000000000000, 	
+2.301508706196191, 	0.000000000000000, 	-0.539901944139077, 	0.000000000000000, 	1.962315832319967, 	0.000000000000000, 	-0.060709041870503, 	0.000000000000000, 	
+-1.353139923300238, 	0.000000000000000, 	-1.482887537805234, 	0.000000000000000, 	1.273732601967176, 	0.000000000000000, 	-3.456609915556321, 	0.000000000000000, 	
+-3.752320586540873, 	0.000000000000000, 	3.536356614978951, 	0.000000000000000, 	0.206035952043233, 	0.000000000000000, 	5.933966913773842, 	0.000000000000000, 	
+-0.486633898075490, 	0.000000000000000, 	-0.329595089863342, 	0.000000000000000, 	1.496414153905337, 	0.000000000000000, 	0.137868749388880, 	0.000000000000000, 	
+-0.437192030996792, 	0.000000000000000, 	2.682750615210656, 	0.000000000000000, 	-2.440234892848570, 	0.000000000000000, 	1.433910252426186, 	0.000000000000000, 	
+-0.415051506104074, 	0.000000000000000, 	1.982003013708649, 	0.000000000000000, 	1.345796609972435, 	0.000000000000000, 	-2.335949513404370, 	0.000000000000000, 	
+1.065988867433025, 	0.000000000000000, 	2.741844905000464, 	0.000000000000000, 	-1.754047930934362, 	0.000000000000000, 	0.229252730015575, 	0.000000000000000, 	
+-0.679791016408669, 	0.000000000000000, 	-2.274097820043743, 	0.000000000000000, 	0.149802252231876, 	0.000000000000000, 	-0.139697151364830, 	0.000000000000000, 	
+-2.773367420505435, 	0.000000000000000, 	-4.403400246165611, 	0.000000000000000, 	-1.468974515184135, 	0.000000000000000, 	0.664990623095844, 	0.000000000000000, 	
+-3.446979775557143, 	0.000000000000000, 	1.850006428987618, 	0.000000000000000, 	-1.550866747921936, 	0.000000000000000, 	-3.632874882935257, 	0.000000000000000, 	
+0.828039662992464, 	0.000000000000000, 	2.794055182632816, 	0.000000000000000, 	-0.593995716682633, 	0.000000000000000, 	0.142788156054200, 	0.000000000000000, 	
+0.552461945119668, 	0.000000000000000, 	0.842127129738758, 	0.000000000000000, 	1.414335509600077, 	0.000000000000000, 	-0.311559241382430, 	0.000000000000000, 	
+1.510590844695250, 	0.000000000000000, 	1.692217183824300, 	0.000000000000000, 	0.613760285711957, 	0.000000000000000, 	0.065233463207770, 	0.000000000000000, 	
+-2.571912893711505, 	0.000000000000000, 	-1.707001531141341, 	0.000000000000000, 	0.673884968382041, 	0.000000000000000, 	0.889863883420103, 	0.000000000000000, 	
+-2.395635435233346, 	0.000000000000000, 	1.129247296359819, 	0.000000000000000, 	0.569074704779735, 	0.000000000000000, 	6.139436017480722, 	0.000000000000000, 	
+0.822158309259017, 	0.000000000000000, 	-3.289872016222589, 	0.000000000000000, 	0.417612988384414, 	0.000000000000000, 	1.493982103868165, 	0.000000000000000, 	
+-0.415353391377005, 	0.000000000000000, 	0.288670764933155, 	0.000000000000000, 	-1.895650228872272, 	0.000000000000000, 	-0.139631694475020, 	0.000000000000000, 	
+1.445103299005436, 	0.000000000000000, 	2.877182243683429, 	0.000000000000000, 	1.192428490172580, 	0.000000000000000, 	-5.964591921763842, 	0.000000000000000, 	
+0.570859795882959, 	0.000000000000000, 	2.328333316356666, 	0.000000000000000, 	0.333755014930026, 	0.000000000000000, 	1.221901577771909, 	0.000000000000000, 	
+0.943358697415568, 	0.000000000000000, 	2.793063983613067, 	0.000000000000000, 	3.163005066073616, 	0.000000000000000, 	2.098300664513867, 	0.000000000000000, 	
+-3.915313164333447, 	0.000000000000000, 	-2.475766769064539, 	0.000000000000000, 	1.720472044894277, 	0.000000000000000, 	-1.273591949275665, 	0.000000000000000, 	
+-1.213451272938616, 	0.000000000000000, 	0.697439404325690, 	0.000000000000000, 	-0.309902287574293, 	0.000000000000000, 	2.622575852162781, 	0.000000000000000, 	
+-2.075881936219060, 	0.000000000000000, 	0.777847545691770, 	0.000000000000000, 	-3.967947986440650, 	0.000000000000000, 	-3.066503371806472, 	0.000000000000000, 	
+1.193780625937845, 	0.000000000000000, 	0.214246579281311, 	0.000000000000000, 	-2.610681491162162, 	0.000000000000000, 	-1.261224183972745, 	0.000000000000000, 	
+-1.165071748544285, 	0.000000000000000, 	-1.116548474834374, 	0.000000000000000, 	0.847202164846982, 	0.000000000000000, 	-3.474301529532390, 	0.000000000000000, 	
+0.020799541946476, 	0.000000000000000, 	-3.868995473288166, 	0.000000000000000, 	1.757979409638067, 	0.000000000000000, 	0.868115130183109, 	0.000000000000000, 	
+0.910167436737958, 	0.000000000000000, 	-1.878855115563720, 	0.000000000000000, 	1.710357104174161, 	0.000000000000000, 	-1.468933980990902, 	0.000000000000000, 	
+1.799544171601169, 	0.000000000000000, 	-4.922332880027887, 	0.000000000000000, 	0.219424548939720, 	0.000000000000000, 	-0.971671113451924, 	0.000000000000000, 	
+-0.940533475616266, 	0.000000000000000, 	0.122510114412152, 	0.000000000000000, 	-1.373686254916911, 	0.000000000000000, 	1.760348103896323, 	0.000000000000000, 	
+0.391745067829643, 	0.000000000000000, 	2.521958505327354, 	0.000000000000000, 	-1.300693516405092, 	0.000000000000000, 	-0.538251788309178, 	0.000000000000000, 	
+0.797184135810173, 	0.000000000000000, 	2.908800548982588, 	0.000000000000000, 	1.590902251655215, 	0.000000000000000, 	-1.070323714487264, 	0.000000000000000, 	
+-3.349764443340999, 	0.000000000000000, 	-1.190563529731447, 	0.000000000000000, 	1.363369471291963, 	0.000000000000000, 	-1.814270299924576, 	0.000000000000000, 	
+-0.023381588315711, 	0.000000000000000, 	1.719182048679569, 	0.000000000000000, 	0.839917213252626, 	0.000000000000000, 	1.006099633839122, 	0.000000000000000, 	
+0.812462674381527, 	0.000000000000000, 	1.755814336346739, 	0.000000000000000, 	2.546848681206319, 	0.000000000000000, 	-1.555300208869455, 	0.000000000000000, 	
+1.017053811631167, 	0.000000000000000, 	0.996591039170903, 	0.000000000000000, 	-1.228047247924881, 	0.000000000000000, 	4.809462271463009, 	0.000000000000000, 	
+2.318113116151685, 	0.000000000000000, 	-1.206932520679733, 	0.000000000000000, 	1.273757685623312, 	0.000000000000000, 	0.724335352481802, 	0.000000000000000, 	
+1.519876652073198, 	0.000000000000000, 	-2.749670314714158, 	0.000000000000000, 	3.424042481847581, 	0.000000000000000, 	-3.714668360421517, 	0.000000000000000, 	
+1.612834197004014, 	0.000000000000000, 	-2.038234723985566, 	0.000000000000000, 	1.470938786562152, 	0.000000000000000, 	2.111634918450302, 	0.000000000000000, 	
+1.030376670151787, 	0.000000000000000, 	-0.420877189003829, 	0.000000000000000, 	-1.502024800532894, 	0.000000000000000, 	0.452310749163804, 	0.000000000000000, 	
+-1.606059382300987, 	0.000000000000000, 	-4.006159967834147, 	0.000000000000000, 	-2.152801208196508, 	0.000000000000000, 	1.671674089372579, 	0.000000000000000, 	
+1.714536333564101, 	0.000000000000000, 	-1.011518543005344, 	0.000000000000000, 	-0.576410282180584, 	0.000000000000000, 	0.733689809480836, 	0.000000000000000, 	
+1.004245602717974, 	0.000000000000000, 	1.010090391888449, 	0.000000000000000, 	3.811459513385621, 	0.000000000000000, 	-5.230621089271954, 	0.000000000000000, 	
+0.678044861034399, 	0.000000000000000, 	1.255935859598107, 	0.000000000000000, 	1.674521701615288, 	0.000000000000000, 	-1.656695216761705, 	0.000000000000000, 	
+1.169286028869693, 	0.000000000000000, 	0.524915416191998, 	0.000000000000000, 	2.397642885039520, 	0.000000000000000, 	2.108711400616072, 	0.000000000000000, 	
+2.037618211018084, 	0.000000000000000, 	-0.623664553406925, 	0.000000000000000, 	2.984106170984409, 	0.000000000000000, 	1.132182737400932, 	0.000000000000000, 	
+-2.859274340352130, 	0.000000000000000, 	-0.975550071398723, 	0.000000000000000, 	-1.359935119997407, 	0.000000000000000, 	-2.963308211050121, 	0.000000000000000, 	
+-0.228726662781163, 	0.000000000000000, 	-1.411110379682043, 	0.000000000000000, 	0.741553355734225, 	0.000000000000000, 	0.497554254758309, 	0.000000000000000, 	
+2.371907950598855, 	0.000000000000000, 	1.063465168988748, 	0.000000000000000, 	-0.641082692081488, 	0.000000000000000, 	-0.855439878540726, 	0.000000000000000, 	
+0.578321738578726, 	0.000000000000000, 	3.005809768796194, 	0.000000000000000, 	1.961458699064065, 	0.000000000000000, 	-3.206261663772745, 	0.000000000000000, 	
+-0.364431989095434, 	0.000000000000000, 	-0.263182496622273, 	0.000000000000000, 	1.843464680631139, 	0.000000000000000, 	-0.419107530229249, 	0.000000000000000, 	
+1.662335873298487, 	0.000000000000000, 	-0.853687563304005, 	0.000000000000000, 	-2.584133404357169, 	0.000000000000000, 	3.466839568922895, 	0.000000000000000, 	
+0.881671345091973, 	0.000000000000000, 	0.454620014206908, 	0.000000000000000, 	-1.737245187402739, 	0.000000000000000, 	2.162713238369243, 	0.000000000000000, 	
+-3.868539002714486, 	0.000000000000000, 	2.014114855933826, 	0.000000000000000, 	-0.703233831811006, 	0.000000000000000, 	-3.410319935997574, 	0.000000000000000, 	
+-1.851235811006584, 	0.000000000000000, 	0.909783907894036, 	0.000000000000000, 	0.091884002136728, 	0.000000000000000, 	-2.688294201131650, 	0.000000000000000, 	
+-0.906134178460955, 	0.000000000000000, 	3.475054609035133, 	0.000000000000000, 	-0.573927964170323, 	0.000000000000000, 	-0.429542937515399, 	0.000000000000000, 	
+0.991348618739939, 	0.000000000000000, 	1.974804904926325, 	0.000000000000000, 	0.975783450796698, 	0.000000000000000, 	-3.057119549071503, 	0.000000000000000, 	
+-3.899429237481194, 	0.000000000000000, 	0.362439009175350, 	0.000000000000000, 	-1.124461670265618, 	0.000000000000000, 	1.806000360163583, 	0.000000000000000, 	
+-2.768333362600288, 	0.000000000000000, 	0.244387897900379, 	0.000000000000000, 	0.908767296720926, 	0.000000000000000, 	1.254669374391882, 	0.000000000000000, 	
+-1.420441929463686, 	0.000000000000000, 	-0.875658895966293, 	0.000000000000000, 	0.183824603376167, 	0.000000000000000, 	-3.361653917011686, 	0.000000000000000, 	
+-0.796615630227952, 	0.000000000000000, 	-1.660226542658673, 	0.000000000000000, 	1.654439358307226, 	0.000000000000000, 	2.782812946709771, 	0.000000000000000, 	
+1.418064412811531, 	0.000000000000000, 	-0.819645647243761, 	0.000000000000000, 	0.807724772592699, 	0.000000000000000, 	-0.941967976379298, 	0.000000000000000, 	
+-2.312768306047469, 	0.000000000000000, 	0.872426936477443, 	0.000000000000000, 	0.919528961530845, 	0.000000000000000, 	-2.084904575264847, 	0.000000000000000, 	
+-1.972464868459322, 	0.000000000000000, 	-1.050687203338466, 	0.000000000000000, 	1.659579707007902, 	0.000000000000000, 	-1.820640014705855, 	0.000000000000000, 	
+-1.195078061671045, 	0.000000000000000, 	-1.639773173762048, 	0.000000000000000, 	1.616744338157063, 	0.000000000000000, 	4.019216096811563, 	0.000000000000000, 	
+3.461021102549681, 	0.000000000000000, 	1.642352734361484, 	0.000000000000000, 	-0.046354693720813, 	0.000000000000000, 	-0.041936252359677, 	0.000000000000000, 	
+-2.393307519480551, 	0.000000000000000, 	-0.341471634615121, 	0.000000000000000, 	-0.392073595257017, 	0.000000000000000, 	-0.219299018372730, 	0.000000000000000, 	
+-2.016391579662071, 	0.000000000000000, 	-0.653096251969787, 	0.000000000000000, 	1.466353155666821, 	0.000000000000000, 	-2.872058864320412, 	0.000000000000000, 	
+-2.157180779503830, 	0.000000000000000, 	0.723257479841560, 	0.000000000000000, 	3.769951308104384, 	0.000000000000000, 	-1.923392042420024, 	0.000000000000000, 	
+0.644899359942840, 	0.000000000000000, 	-2.090226891621437, 	0.000000000000000, 	-0.277043982890403, 	0.000000000000000, 	-0.528271428321112, 	0.000000000000000, 	
+2.518120645960652, 	0.000000000000000, 	1.040820431111488, 	0.000000000000000, 	-4.560583754742486, 	0.000000000000000, 	-0.226899614918836, 	0.000000000000000, 	
+1.713331231108959, 	0.000000000000000, 	-3.293941019163642, 	0.000000000000000, 	-1.113331444648290, 	0.000000000000000, 	-1.032308423149906, 	0.000000000000000, 	
+1.593774272982443, 	0.000000000000000, 	-1.246840475090529, 	0.000000000000000, 	-0.190344684920137, 	0.000000000000000, 	-1.719386356896355, 	0.000000000000000, 	
+-2.827721754659679, 	0.000000000000000, 	-0.092438285279020, 	0.000000000000000, 	-0.565844430675246, 	0.000000000000000, 	-1.077916121691716, 	0.000000000000000, 	
+-1.208665809504693, 	0.000000000000000, 	-2.996014266381254, 	0.000000000000000, 	2.888573323402423, 	0.000000000000000, 	2.829507048720695, 	0.000000000000000, 	
+-0.859177034120755, 	0.000000000000000, 	-1.969302377743254, 	0.000000000000000, 	0.777437674525362, 	0.000000000000000, 	-0.124910190157646, 	0.000000000000000, 	
+0.129875493115290, 	0.000000000000000, 	-4.192139262163992, 	0.000000000000000, 	3.023496047962126, 	0.000000000000000, 	1.149775163736637, 	0.000000000000000, 	
+2.038151304801731, 	0.000000000000000, 	3.016122489841263, 	0.000000000000000, 	-4.829481812137012, 	0.000000000000000, 	-1.668436615909279, 	0.000000000000000, 	
+0.958586784636918, 	0.000000000000000, 	1.550652410058678, 	0.000000000000000, 	-1.456305257976716, 	0.000000000000000, 	-0.079588392344731, 	0.000000000000000, 	
+-2.453213599392345, 	0.000000000000000, 	0.296795909127105, 	0.000000000000000, 	-0.253426616607643, 	0.000000000000000, 	1.418937160028195, 	0.000000000000000, 	
+-1.672949529066915, 	0.000000000000000, 	-1.620990298572947, 	0.000000000000000, 	-1.085103073196045, 	0.000000000000000, 	0.738606361195386, 	0.000000000000000, 	
+-2.097831202853255, 	0.000000000000000, 	2.711952282071310, 	0.000000000000000, 	1.498539238246888, 	0.000000000000000, 	1.317457282535915, 	0.000000000000000, 	
+-0.302765938349717, 	0.000000000000000, 	-0.044623707947201, 	0.000000000000000, 	2.337405215062395, 	0.000000000000000, 	-3.980689173859100, 	0.000000000000000, 	
+
+
+};
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/arm_fft_bin_example.ini

@@ -0,0 +1,13 @@
+
+/* This file demonstrates how to Map memory ranges, specify read, write, and execute permissions
+
+   The file can be executed in the following way:
+   1) manually from uVision command window (in debug mode) using command:
+   INCLUIDE arm_fft_bin_example.ini
+
+*/
+
+// usual initialisation for target setup
+MAP  0x00000000, 0x0003FFFF  EXEC READ      // 256K Flash
+MAP  0x20000000, 0x20007FFF  READ WRITE     //  32K RAM
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/arm_fft_bin_example.uvoptx

@@ -0,0 +1,896 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>ARMCM0</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM0_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fft_bin_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM0$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>155</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>476</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\155</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>152</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>472</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\152</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM3</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM3_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fft_bin_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM3$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>155</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1438</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\155</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>152</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1434</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\152</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM4_FP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM4_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fft_bin_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM4_FP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>155</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1442</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\155</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>152</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1438</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\152</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM7_SP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM7_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>1</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fft_bin_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM7_SP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>155</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1442</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\155</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>152</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1438</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fft_bin_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fft_bin_example\arm_fft_bin_example_f32.c\152</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Files</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_fft_bin_data.c</PathWithFileName>
+      <FilenameWithoutPath>arm_fft_bin_data.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_fft_bin_example_f32.c</PathWithFileName>
+      <FilenameWithoutPath>arm_fft_bin_example_f32.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Documentation</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/arm_fft_bin_example_f32.c

@@ -0,0 +1,158 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+*
+* $Date:         17. January 2013
+* $Revision:     V1.4.0
+*
+* Project:       CMSIS DSP Library
+* Title:	     arm_fft_bin_example_f32.c
+*
+* Description:   Example code demonstrating calculation of Max energy bin of
+*                frequency domain of input signal.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ * @ingroup groupExamples
+ */
+
+/**
+ * @defgroup FrequencyBin Frequency Bin Example
+ *
+ * \par Description
+ * \par
+ * Demonstrates the calculation of the maximum energy bin in the frequency
+ * domain of the input signal with the use of Complex FFT, Complex
+ * Magnitude, and Maximum functions.
+ *
+ * \par Algorithm:
+ * \par
+ * The input test signal contains a 10 kHz signal with uniformly distributed white noise.
+ * Calculating the FFT of the input signal will give us the maximum energy of the
+ * bin corresponding to the input frequency of 10 kHz.
+ *
+ * \par Block Diagram:
+ * \image html FFTBin.gif "Block Diagram"
+ * \par
+ * The figure below shows the time domain signal of 10 kHz signal with
+ * uniformly distributed white noise, and the next figure shows the input
+ * in the frequency domain. The bin with maximum energy corresponds to 10 kHz signal.
+ * \par
+ * \image html FFTBinInput.gif "Input signal in Time domain"
+ * \image html FFTBinOutput.gif "Input signal in Frequency domain"
+ *
+ * \par Variables Description:
+ * \par
+ * \li \c testInput_f32_10khz points to the input data
+ * \li \c testOutput points to the output data
+ * \li \c fftSize length of FFT
+ * \li \c ifftFlag flag for the selection of CFFT/CIFFT
+ * \li \c doBitReverse Flag for selection of normal order or bit reversed order
+ * \li \c refIndex reference index value at which maximum energy of bin ocuurs
+ * \li \c testIndex calculated index value at which maximum energy of bin ocuurs
+ *
+ * \par CMSIS DSP Software Library Functions Used:
+ * \par
+ * - arm_cfft_f32()
+ * - arm_cmplx_mag_f32()
+ * - arm_max_f32()
+ *
+ * <b> Refer  </b>
+ * \link arm_fft_bin_example_f32.c \endlink
+ *
+ */
+
+
+/** \example arm_fft_bin_example_f32.c
+  */
+
+
+#include "arm_math.h"
+#include "arm_const_structs.h"
+
+#define TEST_LENGTH_SAMPLES 2048
+
+/* -------------------------------------------------------------------
+* External Input and Output buffer Declarations for FFT Bin Example
+* ------------------------------------------------------------------- */
+extern float32_t testInput_f32_10khz[TEST_LENGTH_SAMPLES];
+static float32_t testOutput[TEST_LENGTH_SAMPLES/2];
+
+/* ------------------------------------------------------------------
+* Global variables for FFT Bin Example
+* ------------------------------------------------------------------- */
+uint32_t fftSize = 1024;
+uint32_t ifftFlag = 0;
+uint32_t doBitReverse = 1;
+
+/* Reference index at which max energy of bin ocuurs */
+uint32_t refIndex = 213, testIndex = 0;
+
+/* ----------------------------------------------------------------------
+* Max magnitude FFT Bin test
+* ------------------------------------------------------------------- */
+
+int32_t main(void)
+{
+
+  arm_status status;
+  float32_t maxValue;
+
+  status = ARM_MATH_SUCCESS;
+
+  /* Process the data through the CFFT/CIFFT module */
+  arm_cfft_f32(&arm_cfft_sR_f32_len1024, testInput_f32_10khz, ifftFlag, doBitReverse);
+
+  /* Process the data through the Complex Magnitude Module for
+  calculating the magnitude at each bin */
+  arm_cmplx_mag_f32(testInput_f32_10khz, testOutput, fftSize);
+
+  /* Calculates maxValue and returns corresponding BIN value */
+  arm_max_f32(testOutput, fftSize, &maxValue, &testIndex);
+
+  if (testIndex !=  refIndex)
+  {
+    status = ARM_MATH_TEST_FAILURE;
+  }
+
+  /* ----------------------------------------------------------------------
+  ** Loop here if the signals fail the PASS check.
+  ** This denotes a test failure
+  ** ------------------------------------------------------------------- */
+
+  if ( status != ARM_MATH_SUCCESS)
+  {
+    while (1);
+  }
+
+  while (1);                             /* main function does not return */
+}
+
+ /** \endlink */

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/Abstract.txt

@@ -0,0 +1,4 @@
+CMSIS DSP_Lib example arm_fir_example for
+  Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
+
+The example is configured for uVision Simulator.

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM0/startup_ARMCM0.s

@@ -0,0 +1,159 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    ( 22 * 4)                           ; Interrupts 10 .. 31 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM0/system_ARMCM0.c

@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM3/startup_ARMCM3.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM3/system_ARMCM3.c

@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c

@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c

@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/arm_fir_data.c

@@ -0,0 +1,134 @@
+/* ----------------------------------------------------------------------   
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.   
+*   
+* $Date:        17. January 2013  
+* $Revision: 	V1.4.0   
+*   
+* Project: 	    CMSIS DSP Library   
+* Title:	     	arm_fir_data.c
+*   
+* Description:	 Data file used for example code
+*   
+* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
+*  
+* Redistribution and use in source and binary forms, with or without 
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the 
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.  
+ * -------------------------------------------------------------------- */
+
+#include "arm_math.h"
+
+/* ----------------------------------------------------------------------
+** Test input signal contains 1000Hz + 15000 Hz
+** ------------------------------------------------------------------- */
+
+float32_t testInput_f32_1kHz_15kHz[320] =
+{
++0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
+-0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f, 
+-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f, 
++0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
++0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f, 
+-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f, 
++0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
++0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f, 
+-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f, 
+-0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
+-0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f, 
+-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f, 
++0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
++0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f, 
+-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f, 
+-0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
++0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f, 
+-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f, 
+-0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f, 
++0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f, 
++0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f, 
++0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f, 
+};
+
+float32_t refOutput[320] = 
+{
++0.0000000000f, -0.0010797829f, -0.0007681386f, -0.0001982932f, +0.0000644313f, +0.0020854271f, +0.0036891871f, +0.0015855941f, 
+-0.0026280805f, -0.0075907658f, -0.0119390538f, -0.0086665968f, +0.0088981202f, +0.0430539279f, +0.0974468742f, +0.1740405600f, 
++0.2681416601f, +0.3747720089f, +0.4893362230f, +0.6024154672f, +0.7058740791f, +0.7968348987f, +0.8715901940f, +0.9277881093f, 
++0.9682182661f, +0.9934674267f, +1.0012052245f, +0.9925859371f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f, 
++0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, -0.0000000000f, -0.1309866321f, 
+-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f, 
+-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f, 
+-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f, 
++0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f, 
++0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f, 
++0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, -0.0000000000f, -0.1309866321f, 
+-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f, 
+-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f, 
+-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f, 
++0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f, 
++0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f, 
++0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, -0.0000000000f, -0.1309866321f, 
+-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f, 
+-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f, 
+-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f, 
++0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f, 
++0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f, 
++0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, +0.0000000000f, -0.1309866321f, 
+-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f, 
+-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f, 
+-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f, 
++0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f, 
++0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f, 
++0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, +0.0000000000f, -0.1309866321f, 
+-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f, 
+-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f, 
+-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, -0.0000000000f, +0.1309866321f, 
++0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f, 
++0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f, 
++0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, +0.0000000000f, -0.1309866321f, 
+-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f, 
+-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f, 
+-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f, 
++0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f, 
++0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f 
+};
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/arm_fir_example.ini

@@ -0,0 +1,13 @@
+
+/* This file demonstrates how to Map memory ranges, specify read, write, and execute permissions
+
+   The file can be executed in the following way:
+   1) manually from uVision command window (in debug mode) using command:
+   INCLUIDE arm_fir_lpf_example.ini
+
+*/
+
+// usual initialisation for target setup
+MAP  0x00000000, 0x0003FFFF  EXEC READ      // 256K Flash
+MAP  0x20000000, 0x20007FFF  READ WRITE     //  32K RAM
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/arm_fir_example.uvoptx

@@ -0,0 +1,908 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>ARMCM0</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM0_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fir_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM0$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>230</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1640</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\230</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>227</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>1636</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\227</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM3</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM3_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fir_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0NEW_DEVICE -FS00 -FL040000 -FP0($$Device:ARMCM3$Device\ARM\Flash\NEW_DEVICE.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>230</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2478</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\230</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>227</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2474</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\227</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM4_FP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM4_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>0</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fir_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM4_FP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>230</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2810</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\230</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>227</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2806</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\227</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Target>
+    <TargetName>ARMCM7_SP</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\ARMCM7_debug\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>0</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>7</CpuCode>
+      <DebugOpt>
+        <uSim>1</uSim>
+        <uTrg>0</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>1</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile>.\arm_fir_example.ini</sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\UL2CM3.DLL</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>PWSTATINFO</Key>
+          <Name>200,50,700</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0NEW_DEVICE -FL080000 -FS00 -FP0($$Device:ARMCM7_SP$Device\ARM\Flash\NEW_DEVICE.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGDARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name>-T0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>230</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2810</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\230</Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>227</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>2806</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>.\arm_fir_example_f32.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\arm_fir_example\arm_fir_example_f32.c\227</Expression>
+        </Bp>
+      </Breakpoint>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Files</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\math_helper.c</PathWithFileName>
+      <FilenameWithoutPath>math_helper.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_fir_data.c</PathWithFileName>
+      <FilenameWithoutPath>arm_fir_data.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\arm_fir_example_f32.c</PathWithFileName>
+      <FilenameWithoutPath>arm_fir_example_f32.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Documentation</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/arm_fir_example_f32.c

@@ -0,0 +1,233 @@
+/* ----------------------------------------------------------------------
+ * Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+ *
+* $Date:         17. January 2013
+* $Revision:     V1.4.0
+*
+* Project:       CMSIS DSP Library
+ * Title:        arm_fir_example_f32.c
+ *
+ * Description:  Example code demonstrating how an FIR filter can be used
+ *               as a low pass filter.
+ *
+ * Target Processor: Cortex-M4/Cortex-M3
+ *
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ * @ingroup groupExamples
+ */
+
+/**
+ * @defgroup FIRLPF FIR Lowpass Filter Example
+ *
+ * \par Description:
+ * \par
+ * Removes high frequency signal components from the input using an FIR lowpass filter.
+ * The example demonstrates how to configure an FIR filter and then pass data through
+ * it in a block-by-block fashion.
+ * \image html FIRLPF_signalflow.gif
+ *
+ * \par Algorithm:
+ * \par
+ * The input signal is a sum of two sine waves:  1 kHz and 15 kHz.
+ * This is processed by an FIR lowpass filter with cutoff frequency 6 kHz.
+ * The lowpass filter eliminates the 15 kHz signal leaving only the 1 kHz sine wave at the output.
+ * \par
+ * The lowpass filter was designed using MATLAB with a sample rate of 48 kHz and
+ * a length of 29 points.
+ * The MATLAB code to generate the filter coefficients is shown below:
+ * <pre>
+ *     h = fir1(28, 6/24);
+ * </pre>
+ * The first argument is the "order" of the filter and is always one less than the desired length.
+ * The second argument is the normalized cutoff frequency.  This is in the range 0 (DC) to 1.0 (Nyquist).
+ * A 6 kHz cutoff with a Nyquist frequency of 24 kHz lies at a normalized frequency of 6/24 = 0.25.
+ * The CMSIS FIR filter function requires the coefficients to be in time reversed order.
+ * <pre>
+ *     fliplr(h)
+ * </pre>
+ * The resulting filter coefficients and are shown below.
+ * Note that the filter is symmetric (a property of linear phase FIR filters)
+ * and the point of symmetry is sample 14.  Thus the filter will have a delay of
+ * 14 samples for all frequencies.
+ * \par
+ * \image html FIRLPF_coeffs.gif
+ * \par
+ * The frequency response of the filter is shown next.
+ * The passband gain of the filter is 1.0 and it reaches 0.5 at the cutoff frequency 6 kHz.
+ * \par
+ * \image html FIRLPF_response.gif
+ * \par
+ * The input signal is shown below.
+ * The left hand side shows the signal in the time domain while the right hand side is a frequency domain representation.
+ * The two sine wave components can be clearly seen.
+ * \par
+ * \image html FIRLPF_input.gif
+ * \par
+ * The output of the filter is shown below.  The 15 kHz component has been eliminated.
+ * \par
+ * \image html FIRLPF_output.gif
+ *
+ * \par Variables Description:
+ * \par
+ * \li \c testInput_f32_1kHz_15kHz points to the input data
+ * \li \c refOutput points to the reference output data
+ * \li \c testOutput points to the test output data
+ * \li \c firStateF32 points to state buffer
+ * \li \c firCoeffs32 points to coefficient buffer
+ * \li \c blockSize number of samples processed at a time
+ * \li \c numBlocks number of frames
+ *
+ * \par CMSIS DSP Software Library Functions Used:
+ * \par
+ * - arm_fir_init_f32()
+ * - arm_fir_f32()
+ *
+ * <b> Refer  </b>
+ * \link arm_fir_example_f32.c \endlink
+ *
+ */
+
+
+/** \example arm_fir_example_f32.c
+ */
+
+/* ----------------------------------------------------------------------
+** Include Files
+** ------------------------------------------------------------------- */
+
+#include "arm_math.h"
+#include "math_helper.h"
+
+/* ----------------------------------------------------------------------
+** Macro Defines
+** ------------------------------------------------------------------- */
+
+#define TEST_LENGTH_SAMPLES  320
+#define SNR_THRESHOLD_F32    140.0f
+#define BLOCK_SIZE            32
+#define NUM_TAPS              29
+
+/* -------------------------------------------------------------------
+ * The input signal and reference output (computed with MATLAB)
+ * are defined externally in arm_fir_lpf_data.c.
+ * ------------------------------------------------------------------- */
+
+extern float32_t testInput_f32_1kHz_15kHz[TEST_LENGTH_SAMPLES];
+extern float32_t refOutput[TEST_LENGTH_SAMPLES];
+
+/* -------------------------------------------------------------------
+ * Declare Test output buffer
+ * ------------------------------------------------------------------- */
+
+static float32_t testOutput[TEST_LENGTH_SAMPLES];
+
+/* -------------------------------------------------------------------
+ * Declare State buffer of size (numTaps + blockSize - 1)
+ * ------------------------------------------------------------------- */
+
+static float32_t firStateF32[BLOCK_SIZE + NUM_TAPS - 1];
+
+/* ----------------------------------------------------------------------
+** FIR Coefficients buffer generated using fir1() MATLAB function.
+** fir1(28, 6/24)
+** ------------------------------------------------------------------- */
+
+const float32_t firCoeffs32[NUM_TAPS] = {
+  -0.0018225230f, -0.0015879294f, +0.0000000000f, +0.0036977508f, +0.0080754303f, +0.0085302217f, -0.0000000000f, -0.0173976984f,
+  -0.0341458607f, -0.0333591565f, +0.0000000000f, +0.0676308395f, +0.1522061835f, +0.2229246956f, +0.2504960933f, +0.2229246956f,
+  +0.1522061835f, +0.0676308395f, +0.0000000000f, -0.0333591565f, -0.0341458607f, -0.0173976984f, -0.0000000000f, +0.0085302217f,
+  +0.0080754303f, +0.0036977508f, +0.0000000000f, -0.0015879294f, -0.0018225230f
+};
+
+/* ------------------------------------------------------------------
+ * Global variables for FIR LPF Example
+ * ------------------------------------------------------------------- */
+
+uint32_t blockSize = BLOCK_SIZE;
+uint32_t numBlocks = TEST_LENGTH_SAMPLES/BLOCK_SIZE;
+
+float32_t  snr;
+
+/* ----------------------------------------------------------------------
+ * FIR LPF Example
+ * ------------------------------------------------------------------- */
+
+int32_t main(void)
+{
+  uint32_t i;
+  arm_fir_instance_f32 S;
+  arm_status status;
+  float32_t  *inputF32, *outputF32;
+
+  /* Initialize input and output buffer pointers */
+  inputF32 = &testInput_f32_1kHz_15kHz[0];
+  outputF32 = &testOutput[0];
+
+  /* Call FIR init function to initialize the instance structure. */
+  arm_fir_init_f32(&S, NUM_TAPS, (float32_t *)&firCoeffs32[0], &firStateF32[0], blockSize);
+
+  /* ----------------------------------------------------------------------
+  ** Call the FIR process function for every blockSize samples
+  ** ------------------------------------------------------------------- */
+
+  for(i=0; i < numBlocks; i++)
+  {
+    arm_fir_f32(&S, inputF32 + (i * blockSize), outputF32 + (i * blockSize), blockSize);
+  }
+
+  /* ----------------------------------------------------------------------
+  ** Compare the generated output against the reference output computed
+  ** in MATLAB.
+  ** ------------------------------------------------------------------- */
+
+  snr = arm_snr_f32(&refOutput[0], &testOutput[0], TEST_LENGTH_SAMPLES);
+
+  if (snr < SNR_THRESHOLD_F32)
+  {
+    status = ARM_MATH_TEST_FAILURE;
+  }
+  else
+  {
+    status = ARM_MATH_SUCCESS;
+  }
+
+  /* ----------------------------------------------------------------------
+  ** Loop here if the signal does not match the reference output.
+  ** ------------------------------------------------------------------- */
+
+  if ( status != ARM_MATH_SUCCESS)
+  {
+    while (1);
+  }
+
+  while (1);                             /* main function does not return */
+}
+
+/** \endlink */

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/math_helper.c

@@ -0,0 +1,466 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+*
+* $Date:        17. January 2013
+* $Revision: 	V1.4.0  b
+*
+* Project: 	    CMSIS DSP Library
+*
+* Title:	    math_helper.c
+*
+* Description:	Definition of all helper functions required.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+/* ----------------------------------------------------------------------
+*		Include standard header files
+* -------------------------------------------------------------------- */
+#include<math.h>
+
+/* ----------------------------------------------------------------------
+*		Include project header files
+* -------------------------------------------------------------------- */
+#include "math_helper.h"
+
+/**
+ * @brief  Caluclation of SNR
+ * @param[in]  pRef 	Pointer to the reference buffer
+ * @param[in]  pTest	Pointer to the test buffer
+ * @param[in]  buffSize	total number of samples
+ * @return     SNR
+ * The function Caluclates signal to noise ratio for the reference output
+ * and test output
+ */
+
+float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize)
+{
+  float EnergySignal = 0.0, EnergyError = 0.0;
+  uint32_t i;
+  float SNR;
+  int temp;
+  int *test;
+
+  for (i = 0; i < buffSize; i++)
+    {
+ 	  /* Checking for a NAN value in pRef array */
+	  test =   (int *)(&pRef[i]);
+      temp =  *test;
+
+	  if (temp == 0x7FC00000)
+	  {
+	  		return(0);
+	  }
+
+	  /* Checking for a NAN value in pTest array */
+	  test =   (int *)(&pTest[i]);
+      temp =  *test;
+
+	  if (temp == 0x7FC00000)
+	  {
+	  		return(0);
+	  }
+      EnergySignal += pRef[i] * pRef[i];
+      EnergyError += (pRef[i] - pTest[i]) * (pRef[i] - pTest[i]);
+    }
+
+	/* Checking for a NAN value in EnergyError */
+	test =   (int *)(&EnergyError);
+    temp =  *test;
+
+    if (temp == 0x7FC00000)
+    {
+  		return(0);
+    }
+
+
+  SNR = 10 * log10 (EnergySignal / EnergyError);
+
+  return (SNR);
+
+}
+
+
+/**
+ * @brief  Provide guard bits for Input buffer
+ * @param[in,out]  input_buf   Pointer to input buffer
+ * @param[in]       blockSize  block Size
+ * @param[in]       guard_bits guard bits
+ * @return none
+ * The function Provides the guard bits for the buffer
+ * to avoid overflow
+ */
+
+void arm_provide_guard_bits_q15 (q15_t * input_buf, uint32_t blockSize,
+                            uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < blockSize; i++)
+    {
+      input_buf[i] = input_buf[i] >> guard_bits;
+    }
+}
+
+/**
+ * @brief  Converts float to fixed in q12.20 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to outputbuffer
+ * @param[in]  numSamples  number of samples in the input buffer
+ * @return none
+ * The function converts floating point values to fixed point(q12.20) values
+ */
+
+void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 1048576.0f corresponds to pow(2, 20) */
+      pOut[i] = (q31_t) (pIn[i] * 1048576.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 1.0)
+        {
+          pOut[i] = 0x000FFFFF;
+        }
+    }
+}
+
+/**
+ * @brief  Compare MATLAB Reference Output and ARM Test output
+ * @param[in]  pIn         Pointer to Ref buffer
+ * @param[in]  pOut        Pointer to Test buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return maximum difference
+ */
+
+uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+  int32_t diff, diffCrnt = 0;
+  uint32_t maxDiff = 0;
+
+  for (i = 0; i < numSamples; i++)
+  {
+  	diff = pIn[i] - pOut[i];
+  	diffCrnt = (diff > 0) ? diff : -diff;
+
+	if (diffCrnt > maxDiff)
+	{
+		maxDiff = diffCrnt;
+	}
+  }
+
+  return(maxDiff);
+}
+
+/**
+ * @brief  Compare MATLAB Reference Output and ARM Test output
+ * @param[in]  pIn         Pointer to Ref buffer
+ * @param[in]  pOut        Pointer to Test buffer
+ * @param[in]  numSamples number of samples in the buffer
+ * @return maximum difference
+ */
+
+uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t * pOut, uint32_t numSamples)
+{
+  uint32_t i;
+  int32_t diff, diffCrnt = 0;
+  uint32_t maxDiff = 0;
+
+  for (i = 0; i < numSamples; i++)
+  {
+  	diff = pIn[i] - pOut[i];
+  	diffCrnt = (diff > 0) ? diff : -diff;
+
+	if (diffCrnt > maxDiff)
+	{
+		maxDiff = diffCrnt;
+	}
+  }
+
+  return(maxDiff);
+}
+
+/**
+ * @brief  Provide guard bits for Input buffer
+ * @param[in,out]  input_buf   Pointer to input buffer
+ * @param[in]       blockSize  block Size
+ * @param[in]       guard_bits guard bits
+ * @return none
+ * The function Provides the guard bits for the buffer
+ * to avoid overflow
+ */
+
+void arm_provide_guard_bits_q31 (q31_t * input_buf,
+								 uint32_t blockSize,
+                                 uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < blockSize; i++)
+    {
+      input_buf[i] = input_buf[i] >> guard_bits;
+    }
+}
+
+/**
+ * @brief  Provide guard bits for Input buffer
+ * @param[in,out]  input_buf   Pointer to input buffer
+ * @param[in]       blockSize  block Size
+ * @param[in]       guard_bits guard bits
+ * @return none
+ * The function Provides the guard bits for the buffer
+ * to avoid overflow
+ */
+
+void arm_provide_guard_bits_q7 (q7_t * input_buf,
+								uint32_t blockSize,
+                                uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < blockSize; i++)
+    {
+      input_buf[i] = input_buf[i] >> guard_bits;
+    }
+}
+
+
+
+/**
+ * @brief  Caluclates number of guard bits
+ * @param[in]  num_adds 	number of additions
+ * @return guard bits
+ * The function Caluclates the number of guard bits
+ * depending on the numtaps
+ */
+
+uint32_t arm_calc_guard_bits (uint32_t num_adds)
+{
+  uint32_t i = 1, j = 0;
+
+  if (num_adds == 1)
+    {
+      return (0);
+    }
+
+  while (i < num_adds)
+    {
+      i = i * 2;
+      j++;
+    }
+
+  return (j);
+}
+
+/**
+ * @brief  Apply guard bits to buffer
+ * @param[in,out]  pIn         pointer to input buffer
+ * @param[in]      numSamples  number of samples in the input buffer
+ * @param[in]      guard_bits  guard bits
+ * @return none
+ */
+
+void arm_apply_guard_bits (float32_t *pIn,
+						   uint32_t numSamples,
+						   uint32_t guard_bits)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+      pIn[i] = pIn[i] * arm_calc_2pow(guard_bits);
+    }
+}
+
+/**
+ * @brief  Calculates pow(2, numShifts)
+ * @param[in]  numShifts 	number of shifts
+ * @return pow(2, numShifts)
+ */
+uint32_t arm_calc_2pow(uint32_t numShifts)
+{
+
+  uint32_t i, val = 1;
+
+  for (i = 0; i < numShifts; i++)
+    {
+      val = val * 2;
+    }
+
+  return(val);
+}
+
+
+
+/**
+ * @brief  Converts float to fixed q14
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q14 (float *pIn, q15_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 16384.0f corresponds to pow(2, 14) */
+      pOut[i] = (q15_t) (pIn[i] * 16384.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 2.0)
+        {
+          pOut[i] = 0x7FFF;
+        }
+
+    }
+
+}
+
+
+/**
+ * @brief  Converts float to fixed q30 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q30 (float *pIn, q31_t * pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 1073741824.0f corresponds to pow(2, 30) */
+      pOut[i] = (q31_t) (pIn[i] * 1073741824.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 2.0)
+        {
+          pOut[i] = 0x7FFFFFFF;
+        }
+    }
+}
+
+/**
+ * @brief  Converts float to fixed q30 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q29 (float *pIn, q31_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	  /* 1073741824.0f corresponds to pow(2, 30) */
+      pOut[i] = (q31_t) (pIn[i] * 536870912.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 4.0)
+        {
+          pOut[i] = 0x7FFFFFFF;
+        }
+    }
+}
+
+
+/**
+ * @brief  Converts float to fixed q28 format
+ * @param[in]  pIn         pointer to input buffer
+ * @param[out] pOut        pointer to output buffer
+ * @param[in]  numSamples  number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_float_to_q28 (float *pIn, q31_t *pOut, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+	/* 268435456.0f corresponds to pow(2, 28) */
+      pOut[i] = (q31_t) (pIn[i] * 268435456.0f);
+
+      pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
+
+      if (pIn[i] == (float) 8.0)
+        {
+          pOut[i] = 0x7FFFFFFF;
+        }
+    }
+}
+
+/**
+ * @brief  Clip the float values to +/- 1
+ * @param[in,out]  pIn           input buffer
+ * @param[in]      numSamples    number of samples in the buffer
+ * @return none
+ * The function converts floating point values to fixed point values
+ */
+
+void arm_clip_f32 (float *pIn, uint32_t numSamples)
+{
+  uint32_t i;
+
+  for (i = 0; i < numSamples; i++)
+    {
+      if (pIn[i] > 1.0f)
+	  {
+	    pIn[i] = 1.0;
+	  }
+	  else if ( pIn[i] < -1.0f)
+	  {
+	    pIn[i] = -1.0;
+	  }
+
+    }
+}
+
+
+
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_fir_example/math_helper.h

@@ -0,0 +1,63 @@
+/* ----------------------------------------------------------------------   
+* Copyright (C) 2010-2013 ARM Limited. All rights reserved.   
+*   
+* $Date:        17. January 2013  
+* $Revision: 	V1.4.0   
+*  
+* Project: 	    CMSIS DSP Library 
+*
+* Title:	    math_helper.h
+* 
+* Description:	Prototypes of all helper functions required.  
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*  
+* Redistribution and use in source and binary forms, with or without 
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the 
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.  
+* -------------------------------------------------------------------- */
+
+
+#include "arm_math.h"
+
+#ifndef MATH_HELPER_H
+#define MATH_HELPER_H
+
+float arm_snr_f32(float *pRef, float *pTest,  uint32_t buffSize);  
+void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
+void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
+void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
+void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
+void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
+void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
+void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
+void arm_clip_f32(float *pIn, uint32_t numSamples);
+uint32_t arm_calc_guard_bits(uint32_t num_adds);
+void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
+uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
+uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
+uint32_t arm_calc_2pow(uint32_t guard_bits);
+#endif
+

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/Abstract.txt

@@ -0,0 +1,4 @@
+CMSIS DSP_Lib example arm_graphic_equalizer_example for
+  Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
+
+The example is configured for uVision Simulator.

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM0/startup_ARMCM0.s

@@ -0,0 +1,159 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM0.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM0 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    ( 22 * 4)                           ; Interrupts 10 .. 31 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM0/system_ARMCM0.c

@@ -0,0 +1,56 @@
+/**************************************************************************//**
+ * @file     system_ARMCM0.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM0 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM0.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM3/startup_ARMCM3.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM3.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM3 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM3/system_ARMCM3.c

@@ -0,0 +1,68 @@
+/**************************************************************************//**
+ * @file     system_ARMCM3.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM3 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ARMCM3.h"
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM4.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM4 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c

@@ -0,0 +1,83 @@
+/**************************************************************************//**
+ * @file     system_ARMCM4.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM4 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM4)
+  #include "ARMCM4.h"
+#elif defined (ARMCM4_FP)
+  #include "ARMCM4_FP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s

@@ -0,0 +1,163 @@
+;/**************************************************************************//**
+; * @file     startup_ARMCM7.s
+; * @brief    CMSIS Core Device Startup File for
+; *           ARMCM7 Device
+; * @version  V5.3.1
+; * @date     09. July 2018
+; ******************************************************************************/
+;/*
+; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+; *
+; * SPDX-License-Identifier: Apache-2.0
+; *
+; * Licensed under the Apache License, Version 2.0 (the License); you may
+; * not use this file except in compliance with the License.
+; * You may obtain a copy of the License at
+; *
+; * www.apache.org/licenses/LICENSE-2.0
+; *
+; * Unless required by applicable law or agreed to in writing, software
+; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+; * See the License for the specific language governing permissions and
+; * limitations under the License.
+; */
+
+;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+
+
+;<h> Stack Configuration
+;  <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Stack_Size      EQU      0x00000400
+
+                AREA     STACK, NOINIT, READWRITE, ALIGN=3
+__stack_limit
+Stack_Mem       SPACE    Stack_Size
+__initial_sp
+
+
+;<h> Heap Configuration
+;  <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+;</h>
+
+Heap_Size       EQU      0x00000C00
+
+                IF       Heap_Size != 0                      ; Heap is provided
+                AREA     HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE    Heap_Size
+__heap_limit
+                ENDIF
+
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+
+                AREA     RESET, DATA, READONLY
+                EXPORT   __Vectors
+                EXPORT   __Vectors_End
+                EXPORT   __Vectors_Size
+
+__Vectors       DCD      __initial_sp                        ;     Top of Stack
+                DCD      Reset_Handler                       ;     Reset Handler
+                DCD      NMI_Handler                         ; -14 NMI Handler
+                DCD      HardFault_Handler                   ; -13 Hard Fault Handler
+                DCD      MemManage_Handler                   ; -12 MPU Fault Handler
+                DCD      BusFault_Handler                    ; -11 Bus Fault Handler
+                DCD      UsageFault_Handler                  ; -10 Usage Fault Handler
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      0                                   ;     Reserved
+                DCD      SVC_Handler                         ;  -5 SVCall Handler
+                DCD      DebugMon_Handler                    ;  -4 Debug Monitor Handler
+                DCD      0                                   ;     Reserved
+                DCD      PendSV_Handler                      ;  -2 PendSV Handler
+                DCD      SysTick_Handler                     ;  -1 SysTick Handler
+
+                ; Interrupts
+                DCD      Interrupt0_Handler                  ;   0 Interrupt 0
+                DCD      Interrupt1_Handler                  ;   1 Interrupt 1
+                DCD      Interrupt2_Handler                  ;   2 Interrupt 2
+                DCD      Interrupt3_Handler                  ;   3 Interrupt 3
+                DCD      Interrupt4_Handler                  ;   4 Interrupt 4
+                DCD      Interrupt5_Handler                  ;   5 Interrupt 5
+                DCD      Interrupt6_Handler                  ;   6 Interrupt 6
+                DCD      Interrupt7_Handler                  ;   7 Interrupt 7
+                DCD      Interrupt8_Handler                  ;   8 Interrupt 8
+                DCD      Interrupt9_Handler                  ;   9 Interrupt 9
+
+                SPACE    (214 * 4)                           ; Interrupts 10 .. 224 are left out
+__Vectors_End
+__Vectors_Size  EQU      __Vectors_End - __Vectors
+
+
+                AREA     |.text|, CODE, READONLY
+
+; Reset Handler
+
+Reset_Handler   PROC
+                EXPORT   Reset_Handler             [WEAK]
+                IMPORT   SystemInit
+                IMPORT   __main
+
+                LDR      R0, =SystemInit
+                BLX      R0
+                LDR      R0, =__main
+                BX       R0
+                ENDP
+
+
+; Macro to define default exception/interrupt handlers.
+; Default handler are weak symbols with an endless loop.
+; They can be overwritten by real handlers.
+                MACRO
+                Set_Default_Handler  $Handler_Name
+$Handler_Name   PROC
+                EXPORT   $Handler_Name             [WEAK]
+                B        .
+                ENDP
+                MEND
+
+
+; Default exception/interrupt handler
+
+                Set_Default_Handler  NMI_Handler
+                Set_Default_Handler  HardFault_Handler
+                Set_Default_Handler  MemManage_Handler
+                Set_Default_Handler  BusFault_Handler
+                Set_Default_Handler  UsageFault_Handler
+                Set_Default_Handler  SVC_Handler
+                Set_Default_Handler  DebugMon_Handler
+                Set_Default_Handler  PendSV_Handler
+                Set_Default_Handler  SysTick_Handler
+
+                Set_Default_Handler  Interrupt0_Handler
+                Set_Default_Handler  Interrupt1_Handler
+                Set_Default_Handler  Interrupt2_Handler
+                Set_Default_Handler  Interrupt3_Handler
+                Set_Default_Handler  Interrupt4_Handler
+                Set_Default_Handler  Interrupt5_Handler
+                Set_Default_Handler  Interrupt6_Handler
+                Set_Default_Handler  Interrupt7_Handler
+                Set_Default_Handler  Interrupt8_Handler
+                Set_Default_Handler  Interrupt9_Handler
+
+                ALIGN
+
+
+; User setup Stack & Heap
+
+                EXPORT   __stack_limit
+                EXPORT   __initial_sp
+                IF       Heap_Size != 0                      ; Heap is provided
+                EXPORT   __heap_base
+                EXPORT   __heap_limit
+                ENDIF
+
+                END

platform/vendor_bsp/nxp/MIMXRT1062/CMSIS/DSP/Examples/ARM/arm_graphic_equalizer_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c

@@ -0,0 +1,85 @@
+/**************************************************************************//**
+ * @file     system_ARMCM7.c
+ * @brief    CMSIS Device System Source File for
+ *           ARMCM7 Device
+ * @version  V5.3.1
+ * @date     09. July 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined (ARMCM7)
+  #include "ARMCM7.h"
+#elif defined (ARMCM7_SP)
+  #include "ARMCM7_SP.h"
+#elif defined (ARMCM7_DP)
+  #include "ARMCM7_DP.h"
+#else
+  #error device not specified!
+#endif
+
+/*----------------------------------------------------------------------------
+  Define clocks
+ *----------------------------------------------------------------------------*/
+#define  XTAL            (50000000UL)     /* Oscillator frequency */
+
+#define  SYSTEM_CLOCK    (XTAL / 2U)
+
+
+/*----------------------------------------------------------------------------
+  Externals
+ *----------------------------------------------------------------------------*/
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  extern uint32_t __Vectors;
+#endif
+
+/*----------------------------------------------------------------------------
+  System Core Clock Variable
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = SYSTEM_CLOCK;  /* System Core Clock Frequency */
+
+
+/*----------------------------------------------------------------------------
+  System Core Clock update function
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void)
+{
+  SystemCoreClock = SYSTEM_CLOCK;
+}
+
+/*----------------------------------------------------------------------------
+  System initialization function
+ *----------------------------------------------------------------------------*/
+void SystemInit (void)
+{
+
+#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
+  SCB->VTOR = (uint32_t) &__Vectors;
+#endif
+
+#if defined (__FPU_USED) && (__FPU_USED == 1U)
+  SCB->CPACR |= ((3U << 10U*2U) |           /* enable CP10 Full Access */
+                 (3U << 11U*2U)  );         /* enable CP11 Full Access */
+#endif
+
+#ifdef UNALIGNED_SUPPORT_DISABLE
+  SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
+#endif
+
+  SystemCoreClock = SYSTEM_CLOCK;
+}