PowLu/TencentOS-tiny
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add lora lowpower at command support

Browse Source 
add lora lowpower at command support
This commit is contained in:
supowang
2019-12-18 13:01:35 +08:00
parent d0f61b43a5
commit e1c19fd194
8 changed files with 86 additions and 104 deletions
Download Patch File Download Diff File Expand all files Collapse all files

66
board/TencentOS_tiny_EVB_LX/BSP/Src/usart.c
View File

@@ -27,39 +27,69 @@ void usart0_init(int baud)
usart_enable(USART0);
}
void usart1_init(int baud)
{
/* enable GPIO clock */
rcu_periph_clock_enable(RCU_GPIOA);
void uart3_init(int baud)
/* enable USART1 clock */
rcu_periph_clock_enable(RCU_USART1);
/* connect port to USART0_Tx */
gpio_init(USART1_GPIO_PORT, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, USART1_GPIO_TX_PIN);
/* connect port to USART0_Rx */
gpio_init(USART1_GPIO_PORT, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, USART1_GPIO_RX_PIN);
/* USART1 configure */
usart_deinit(USART1);
usart_baudrate_set(USART1, baud);
usart_word_length_set(USART1, USART_WL_8BIT);
usart_stop_bit_set(USART1, USART_STB_1BIT);
usart_parity_config(USART1, USART_PM_NONE);
usart_hardware_flow_rts_config(USART1, USART_RTS_DISABLE);
usart_hardware_flow_cts_config(USART1, USART_CTS_DISABLE);
usart_receive_config(USART1, USART_RECEIVE_ENABLE);
usart_transmit_config(USART1, USART_TRANSMIT_ENABLE);
usart_enable(USART1);
}
void usart2_init(int baud)
{
/* enable GPIO clock */
rcu_periph_clock_enable(RCU_GPIOC);
/* enable USART0 clock */
rcu_periph_clock_enable(RCU_UART3);
/* enable USART2 clock */
rcu_periph_clock_enable(RCU_USART2);
/* connect port to USART0_Tx */
gpio_init(USART3_GPIO_PORT, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, USART3_GPIO_TX_PIN);
gpio_init(USART2_GPIO_PORT, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, USART2_GPIO_TX_PIN);
/* connect port to USART0_Rx */
gpio_init(USART3_GPIO_PORT, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, USART3_GPIO_RX_PIN);
gpio_init(USART2_GPIO_PORT, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, USART2_GPIO_RX_PIN);
/* USART0 configure */
usart_deinit(UART3);
usart_baudrate_set(UART3, baud);
usart_word_length_set(UART3, USART_WL_8BIT);
usart_stop_bit_set(UART3, USART_STB_1BIT);
usart_parity_config(UART3, USART_PM_NONE);
usart_hardware_flow_rts_config(UART3, USART_RTS_DISABLE);
usart_hardware_flow_cts_config(UART3, USART_CTS_DISABLE);
usart_receive_config(UART3, USART_RECEIVE_ENABLE);
usart_transmit_config(UART3, USART_TRANSMIT_ENABLE);
usart_enable(UART3);
gpio_pin_remap_config(GPIO_USART2_FULL_REMAP,ENABLE);
/* USART1 configure */
usart_deinit(USART2);
usart_baudrate_set(USART2, baud);
usart_word_length_set(USART2, USART_WL_8BIT);
usart_stop_bit_set(USART2, USART_STB_1BIT);
usart_parity_config(USART2, USART_PM_NONE);
usart_hardware_flow_rts_config(USART2, USART_RTS_DISABLE);
usart_hardware_flow_cts_config(USART2, USART_CTS_DISABLE);
usart_receive_config(USART2, USART_RECEIVE_ENABLE);
usart_transmit_config(USART2, USART_TRANSMIT_ENABLE);
usart_enable(USART2);
}
int _put_char(int ch)
{
usart_data_transmit(UART3, (uint8_t) ch );
while ( usart_flag_get(UART3, USART_FLAG_TBE)== RESET){
usart_data_transmit(USART0, (uint8_t) ch );
while ( usart_flag_get(USART0, USART_FLAG_TBE)== RESET){
}
return ch;