first commit for opensource

2019-09-16 13:19:50 +08:00
parent 08ab013b8e
commit edb2879617
6303 changed files with 5472815 additions and 23 deletions
--- a/board/STM32F103_SIM800A/Src/mcu_init.c
+++ b/board/STM32F103_SIM800A/Src/mcu_init.c
@@ -0,0 +1,161 @@
+#include "mcu_init.h"
+
+int fputc(int ch, FILE *f)
+{
+  if (ch == '\n') {
+    HAL_UART_Transmit(&huart1, (void *)"\r", 1,30000);
+  }
+  HAL_UART_Transmit(&huart1, (uint8_t *)&ch, 1, 0xFFFF);
+  return ch;
+}
+
+int _write(int fd, char *ptr, int len)
+{
+    (void)HAL_UART_Transmit(&huart1, (uint8_t *)ptr, len, 0xFFFF);
+    return len;
+}
+
+int fgetc(FILE *f)
+{
+  /* Place your implementation of fgetc here */
+  /* e.g. readwrite a character to the USART2 and Loop until the end of transmission */
+  uint8_t ch = 0;
+  HAL_UART_Receive(&huart1, &ch, 1,30000);
+  return ch;
+}
+
+
+/*
+*  mqtt connect to tencent cloud with sim800a demo
+*/
+void sim800a_power_on(void)
+{
+    HAL_GPIO_WritePin(GPRS_PWR_GPIO_Port, GPRS_PWR_Pin, GPIO_PIN_RESET);
+    HAL_Delay(2000);
+    HAL_GPIO_WritePin(GPRS_PWR_GPIO_Port, GPRS_PWR_Pin, GPIO_PIN_SET);
+    HAL_GPIO_WritePin(GPRS_P_EN_GPIO_Port, GPRS_P_EN_Pin, GPIO_PIN_SET);
+    HAL_Delay(5000);
+}
+
+/**
+  * @brief bsp hardware init
+  * @retval None
+  */
+void board_init(void)
+{
+    HAL_Init();
+    SystemClock_Config();
+    MX_GPIO_Init();
+    MX_USART1_UART_Init();
+    //MX_USART2_UART_Init();
+    MX_USART3_UART_Init();
+    hal_spi_flash_config();
+    MX_USB_PCD_Init();
+    MX_ADC1_Init();
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+
+    RCC_OscInitTypeDef RCC_OscInitStruct;
+    RCC_ClkInitTypeDef RCC_ClkInitStruct;
+    RCC_PeriphCLKInitTypeDef PeriphClkInit;
+
+    /**Initializes the CPU, AHB and APB busses clocks 
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+    RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+    RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+    _Error_Handler(__FILE__, __LINE__);
+    }
+
+    /**Initializes the CPU, AHB and APB busses clocks 
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+    {
+    _Error_Handler(__FILE__, __LINE__);
+    }
+
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
+    PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
+    PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+    _Error_Handler(__FILE__, __LINE__);
+    }
+
+    /**Configure the Systick interrupt time 
+    */
+    HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+
+    /**Configure the Systick 
+    */
+    HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
+
+    /* SysTick_IRQn interrupt configuration */
+    HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @param  file: The file name as string.
+  * @param  line: The line in file as a number.
+  * @retval None
+  */
+void _Error_Handler(char *file, int line)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  while(1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/