Merge pull request #201 from chimeh/feature/qmk

Makefile-base build system for TencentOS-tiny
This commit is contained in:
Supowang
2020-07-16 17:11:35 +08:00
committed by GitHub
78 changed files with 6225 additions and 8 deletions

48
arch/Makefile Normal file
View File

@@ -0,0 +1,48 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
ifneq (help,$(findstring help,$(MAKECMDGOALS)))
ifeq (, $(strip ${BP}))
$(error when compile arch/, must specify BP obviously , see `make help`)
endif
include ${QTOP}/qmk/board-pack/bp.${BP}
ifeq (,$(strip ${ARCH_LSRCS}))
$(error when compile arch/, must specify ARCH_LSRCS on your bp.${BP} , see `make help`)
endif
endif
# arch src should be specify by bp
LSRCS := $(subst $(QTOP)/arch/,, ${ARCH_LSRCS})
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,50 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
export QTOP
####################################################################
export BP=Linux_Posix
TREE_LIB_ENABLE=1
lib=
subdirs =
all::
make -C ${QTOP}/arch BP=${BP}
make -C ${QTOP}/kernel BP=${BP}
make -C ${QTOP}/osal BP=${BP}
make -C ${QTOP}/net BP=${BP}
make -C ${QTOP}/devices BP=${BP}
exec =
LD_A_FILES += $(LIBDIR)/libarch.a
LD_A_FILES += $(LIBDIR)/libkernel.a
LD_A_FILES += $(LIBDIR)/libhello_world.a
LD_A_FILES += $(LIBDIR)/libcmsis_os.a
LDFLAGS += -lpthread
include ${QTOP}/qmk/generic/Make.exec

View File

@@ -0,0 +1,236 @@
/**
******************************************************************************
* @file lwipopts.h
* @author MCD Application Team
* @version V1.1.0
* @date 31-July-2013
* @brief lwIP Options Configuration.
* This file is based on Utilities\lwip_v1.4.1\src\include\lwip\opt.h
* and contains the lwIP configuration for the STM32F4x7 demonstration.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__
/**
* SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
* critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#define SYS_LIGHTWEIGHT_PROT 1
/**
* NO_SYS==1: Provides VERY minimal functionality. Otherwise,
* use lwIP facilities.
*/
#define NO_SYS 0
/**
* NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
* Mainly for compatibility to old versions.
*/
#define NO_SYS_NO_TIMERS 0
/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
byte alignment -> define MEM_ALIGNMENT to 2. */
#define MEM_ALIGNMENT 4
/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
#define MEM_SIZE (5 * 1024)
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
sends a lot of data out of ROM (or other static memory), this
should be set high. */
#define MEMP_NUM_PBUF 25
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
per active UDP "connection". */
#define MEMP_NUM_UDP_PCB 4
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
connections. */
#define MEMP_NUM_TCP_PCB 6
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 6
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
segments. */
#define MEMP_NUM_TCP_SEG 150
/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
timeouts. */
#define MEMP_NUM_SYS_TIMEOUT 6
/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE 25
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS + 40 + PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN)
/* ---------- TCP options ---------- */
#define LWIP_TCP 1
#define TCP_TTL 255
/* Controls if TCP should queue segments that arrive out of
order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ 0
/* TCP Maximum segment size. */
#define TCP_MSS (1500 - 40) /* TCP_MSS = (Ethernet MTU - IP header size - TCP header size) */
/* TCP sender buffer space (bytes). */
#define TCP_SND_BUF (7 * TCP_MSS)
/* TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */
#define TCP_SND_QUEUELEN (8 * TCP_SND_BUF / TCP_MSS)
/* TCP receive window. */
#define TCP_WND (9 * TCP_MSS)
/* ---------- ICMP options ---------- */
#define LWIP_ICMP 1
/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
interfaces. DHCP is not implemented in lwIP 0.5.1, however, so
turning this on does currently not work. */
#define LWIP_DHCP 1
/* ---------- UDP options ---------- */
#define LWIP_UDP 1
#define UDP_TTL 255
/* ---------- Statistics options ---------- */
#define LWIP_STATS 0
#define LWIP_PROVIDE_ERRNO 1
/* ---------- link callback options ---------- */
/* LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
* whenever the link changes (i.e., link down)
*/
#define LWIP_NETIF_LINK_CALLBACK 0
/*
--------------------------------------
---------- Checksum options ----------
--------------------------------------
*/
/*
The STM32F4x7 allows computing and verifying the IP, UDP, TCP and ICMP checksums by hardware:
- To use this feature let the following define uncommented.
- To disable it and process by CPU comment the the checksum.
*/
#define CHECKSUM_BY_HARDWARE
//#undef CHECKSUM_BY_HARDWARE
#ifdef CHECKSUM_BY_HARDWARE
/* CHECKSUM_GEN_IP==0: Generate checksums by hardware for outgoing IP packets.*/
#define CHECKSUM_GEN_IP 0
/* CHECKSUM_GEN_UDP==0: Generate checksums by hardware for outgoing UDP packets.*/
#define CHECKSUM_GEN_UDP 0
/* CHECKSUM_GEN_TCP==0: Generate checksums by hardware for outgoing TCP packets.*/
#define CHECKSUM_GEN_TCP 0
/* CHECKSUM_CHECK_IP==0: Check checksums by hardware for incoming IP packets.*/
#define CHECKSUM_CHECK_IP 0
/* CHECKSUM_CHECK_UDP==0: Check checksums by hardware for incoming UDP packets.*/
#define CHECKSUM_CHECK_UDP 0
/* CHECKSUM_CHECK_TCP==0: Check checksums by hardware for incoming TCP packets.*/
#define CHECKSUM_CHECK_TCP 0
/* CHECKSUM_CHECK_ICMP==0: Check checksums by hardware for incoming ICMP packets.*/
#define CHECKSUM_GEN_ICMP 0
#else
/* CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.*/
#define CHECKSUM_GEN_IP 1
/* CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.*/
#define CHECKSUM_GEN_UDP 1
/* CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.*/
#define CHECKSUM_GEN_TCP 1
/* CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.*/
#define CHECKSUM_CHECK_IP 1
/* CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.*/
#define CHECKSUM_CHECK_UDP 1
/* CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.*/
#define CHECKSUM_CHECK_TCP 1
/* CHECKSUM_CHECK_ICMP==1: Check checksums by hardware for incoming ICMP packets.*/
#define CHECKSUM_GEN_ICMP 1
#endif
#define LWIP_TCPIP_CORE_LOCKING 1
/*
----------------------------------------------
---------- Sequential layer options ----------
----------------------------------------------
*/
/**
* LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
*/
#define LWIP_NETCONN 1
/*
------------------------------------
---------- Socket options ----------
------------------------------------
*/
/**
* LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
*/
#define LWIP_SOCKET 1
/*
---------------------------------
---------- OS options ----------
---------------------------------
*/
#define DEFAULT_UDP_RECVMBOX_SIZE 10
#define DEFAULT_TCP_RECVMBOX_SIZE 10
#define DEFAULT_ACCEPTMBOX_SIZE 10
#define DEFAULT_THREAD_STACKSIZE 1024 * 2
#define TCPIP_THREAD_NAME "lwip"
#define TCPIP_THREAD_STACKSIZE 1024
#define TCPIP_MBOX_SIZE 10
#define TCPIP_THREAD_PRIO 1
#define LWIP_DNS_API_DECLARE_STRUCTS 1
#define LWIP_DNS 1
/** DNS server IP address */
#ifndef DNS_SERVER_ADDRESS
#define DNS_SERVER_ADDRESS(ipaddr) (ip4_addr_set_u32(ipaddr, ipaddr_addr("208.67.222.222"))) /* resolver1.opendns.com */
#endif
/*
----------------------------------------
---------- Lwip Debug options ----------
----------------------------------------
*/
#define LWIP_DEBUG 0
#define ethernet_with_mac 1
#endif /* __LWIPOPTS_H__ */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@@ -2,12 +2,13 @@
#define _TOS_CONFIG_H_ #define _TOS_CONFIG_H_
#include "stddef.h" #include "stddef.h"
#include "stdint.h"
#define TOS_CFG_TASK_PRIO_MAX 10u // 配置TencentOS tiny默认支持的最大优先级数量 #define TOS_CFG_TASK_PRIO_MAX 10u // 配置TencentOS tiny默认支持的最大优先级数量
#define TOS_CFG_ROUND_ROBIN_EN 1u // 配置TencentOS tiny的内核是否开启时间片轮转 #define TOS_CFG_ROUND_ROBIN_EN 1u // 配置TencentOS tiny的内核是否开启时间片轮转
#define TOS_CFG_OBJECT_VERIFY 0u // 配置TencentOS tiny是否校验指针合法 #define TOS_CFG_OBJECT_VERIFY_EN 1u // 配置TencentOS tiny是否校验指针合法
#define TOS_CFG_EVENT_EN 1u // TencentOS tiny 事件模块功能宏 #define TOS_CFG_EVENT_EN 1u // TencentOS tiny 事件模块功能宏
@@ -19,8 +20,12 @@
#define TOS_CFG_MUTEX_EN 1u // 配置TencentOS tiny是否开启互斥锁模块 #define TOS_CFG_MUTEX_EN 1u // 配置TencentOS tiny是否开启互斥锁模块
#define TOS_CFG_QUEUE_EN 1u // 配置TencentOS tiny是否开启队列模块 #define TOS_CFG_MESSAGE_QUEUE_EN 1u
#define TOS_CFG_MAIL_QUEUE_EN 1u
#define TOS_CFG_PRIORITY_MESSAGE_QUEUE_EN 1u
#define TOS_CFG_PRIORITY_MAIL_QUEUE_EN 1u
#define TOS_CFG_TIMER_EN 1u // 配置TencentOS tiny是否开启软件定时器模块 #define TOS_CFG_TIMER_EN 1u // 配置TencentOS tiny是否开启软件定时器模块
#define TOS_CFG_SEM_EN 1u // 配置TencentOS tiny是否开启信号量模块 #define TOS_CFG_SEM_EN 1u // 配置TencentOS tiny是否开启信号量模块
@@ -43,4 +48,4 @@
#define TOS_CFG_TIMER_AS_PROC 1u // 配置是否将TIMER配置成函数模式 #define TOS_CFG_TIMER_AS_PROC 1u // 配置是否将TIMER配置成函数模式
#endif #endif

View File

@@ -0,0 +1,58 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
export QTOP
####################################################################
export BP=Linux_Posix
TREE_LIB_ENABLE=1
lib=
subdirs =
CFGFLAGS += -I$(CUR_DIR)/inc
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
CFGFLAGS += -I$(QTOP)/components/connectivity/Eclipse-Paho-MQTT/wrapper/include
CFGFLAGS += -I$(QTOP)/components/connectivity/Eclipse-Paho-MQTT/3rdparty/include
all::
make -C ${QTOP}/arch BP=Linux_Posix
make -C ${QTOP}/kernel
make -C ${QTOP}/osal
make -C ${QTOP}/net
make -C ${QTOP}/devices
make -C ${QTOP}/components/connectivity/Eclipse-Paho-MQTT
exec =
LD_A_FILES += $(LIBDIR)/libarch.a
LD_A_FILES += $(LIBDIR)/libkernel.a
LD_A_FILES += $(LIBDIR)/libhello_world.a
LD_A_FILES += $(LIBDIR)/libcmsis_os.a
LD_A_FILES += $(LIBDIR)/libEclipse-Paho-MQTT.a
LD_A_FILES += $(LIBDIR)/libsal_module_wrapper.a
LDFLAGS += -lpthread
include ${QTOP}/qmk/generic/Make.exec

View File

@@ -11,7 +11,7 @@
#define MQTT_SUBSCRIBE_TOPIC "$product/$dev/$sub" #define MQTT_SUBSCRIBE_TOPIC "$product/$dev/$sub"
#define MQTT_PUBLISH_TOPIC "$product/$dev/$pub" #define MQTT_PUBLISH_TOPIC "$product/$dev/$pub"
#error please replace yourself server configuration //#error please replace yourself server configuration
/** /**
* 1. run python tool * 1. run python tool
* ``` * ```

View File

@@ -43,7 +43,7 @@
extern QSPI_HandleTypeDef hqspi; extern QSPI_HandleTypeDef hqspi;
/* This function is called by inner-HAL lib */ /* This function is called by inner-HAL lib */
static void HAL_QSPI_MspInit(QSPI_HandleTypeDef* qspiHandle) void HAL_QSPI_MspInit(QSPI_HandleTypeDef* qspiHandle)
{ {
GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitTypeDef GPIO_InitStruct;
@@ -75,7 +75,7 @@ static void HAL_QSPI_MspInit(QSPI_HandleTypeDef* qspiHandle)
} }
/* This function is called by inner-HAL lib */ /* This function is called by inner-HAL lib */
static void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* qspiHandle) void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* qspiHandle)
{ {
if(qspiHandle->Instance==QUADSPI) if(qspiHandle->Instance==QUADSPI)

View File

@@ -0,0 +1,47 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
ifneq (help,$(findstring help,$(MAKECMDGOALS)))
ifeq (, $(strip ${BP}))
$(error when compile arch/, must specify BP and BSP_LSRCS obviously , see `make help`)
endif
include ${QTOP}/qmk/board-pack/bp.${BP}
ifeq (,$(strip ${BSP_LSRCS}))
$(error when compile arch/, must specify BP and BSP_LSRCS obviously , see `make help`)
endif
endif
# arch src should be specify by bp
LSRCS := $(sort $(subst $(QTOP)/$(LOCALDIR)/,, ${BSP_LSRCS}))
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -16,6 +16,7 @@
* *
****************************************************************************** ******************************************************************************
*/ */
#if TOS_CFG_EVENT_DRIVEN_EN > 0u
/* USER CODE END Header */ /* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/ /* Includes ------------------------------------------------------------------*/
@@ -301,3 +302,5 @@ void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
} }
/* USER CODE END 1 */ /* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
#endif

View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
export BP=TencentOS_tiny_EVB_MX_Plus
include ${QTOP}/qmk/generic/Make.tpl
include ${QTOP}/qmk/generic/Make.subdirs

View File

@@ -0,0 +1,70 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
export QTOP
####################################################################
export BP=TencentOS_tiny_EVB_MX_Plus
TREE_LIB_ENABLE=1
lib=
subdirs =
LSRCS += $(QTOP)/examples/farm_ai_demo/farm_ai_demo.c
LSRCS += $(wildcard *.s)
all::
make -C ${QTOP}/arch BP=${BP}
make -C ${QTOP}/board/TencentOS_tiny_EVB_MX_Plus/BSP BP=${BP}
make -C ${QTOP}/components/connectivity/Eclipse-Paho-MQTT BP=${BP}
make -C ${QTOP}/components/utils/JSON BP=${BP}
make -C ${QTOP}/devices BP=${BP}
make -C ${QTOP}/kernel BP=${BP}
make -C ${QTOP}/net/at BP=${BP}
make -C ${QTOP}/net/sal_module_wrapper BP=${BP}
make -C ${QTOP}/net/socket_wrapper BP=${BP}
make -C ${QTOP}/net/tencent_firmware_module_wrapper BP=${BP}
make -C ${QTOP}/osal BP=${BP}
make -C ${QTOP}/platform BP=${BP}
#exec =
LD_A_FILES += $(LIBDIR)/libarch.a
LD_A_FILES += $(LIBDIR)/libkernel.a
#LD_A_FILES += $(LIBDIR)/lib$(notdir $(CUR_DIR)).a
LD_A_FILES += $(LIBDIR)/libcmsis_os.a
LD_A_FILES += $(LIBDIR)/libhal.a
LD_A_FILES += $(LIBDIR)/libvendor_bsp.a
LD_A_FILES += $(LIBDIR)/libJSON.a
LD_A_FILES += $(LIBDIR)/libBSP.a
LD_A_FILES += $(LIBDIR)/libEclipse-Paho-MQTT.a
LD_A_FILES += $(LIBDIR)/libesp8266_tencent_firmware.a
LD_A_FILES += $(LIBDIR)/libesp8266.a
LD_A_FILES += $(LIBDIR)/libat.a
LD_A_FILES += $(LIBDIR)/libtencent_firmware_module_wrapper.a
LD_A_FILES += $(LIBDIR)/libsal_module_wrapper.a
LD_A_FILES += $(LIBDIR)/libsocket_wrapper.a
LD_A_LISTS += -lc -lm -lnosys
LD_L_LISTS += -specs=nosys.specs -T$(CUR_DIR)/STM32L431RCTx_FLASH.ld -Wl,-Map=$(LIBDIR)/$(notdir $(CUR_DIR)).map,--cref -Wl,--gc-sections
include ${QTOP}/qmk/generic/Make.exec

View File

@@ -0,0 +1,203 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
** Author : Auto-generated by Ac6 System Workbench
**
** Abstract : Linker script for STM32L431RCTx series
** 256Kbytes FLASH and 64Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed “as is,” without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of Ac6 nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20010000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(8);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(8);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(8);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(8);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(8);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(8);
} >FLASH
.ARM.extab :
{
. = ALIGN(8);
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(8);
} >FLASH
.ARM : {
. = ALIGN(8);
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
. = ALIGN(8);
} >FLASH
.preinit_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(8);
} >FLASH
.init_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(8);
} >FLASH
.fini_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
. = ALIGN(8);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(8);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(8);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@@ -0,0 +1,474 @@
/**
******************************************************************************
* @file startup_stm32l431xx.s
* @author MCD Application Team
* @brief STM32L431xx devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* Atollic update: set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex-M4. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_PVM_IRQHandler
.word TAMP_STAMP_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word 0
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SDMMC1_IRQHandler
.word 0
.word SPI3_IRQHandler
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word 0
.word COMP_IRQHandler
.word LPTIM1_IRQHandler
.word LPTIM2_IRQHandler
.word 0
.word DMA2_Channel6_IRQHandler
.word DMA2_Channel7_IRQHandler
.word LPUART1_IRQHandler
.word QUADSPI_IRQHandler
.word I2C3_EV_IRQHandler
.word I2C3_ER_IRQHandler
.word SAI1_IRQHandler
.word 0
.word SWPMI1_IRQHandler
.word TSC_IRQHandler
.word 0
.word 0
.word RNG_IRQHandler
.word FPU_IRQHandler
.word CRS_IRQHandler
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_PVM_IRQHandler
.thumb_set PVD_PVM_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak COMP_IRQHandler
.thumb_set COMP_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak DMA2_Channel6_IRQHandler
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
.weak DMA2_Channel7_IRQHandler
.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak QUADSPI_IRQHandler
.thumb_set QUADSPI_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@@ -0,0 +1,60 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
export QTOP
####################################################################
export BP=TencentOS_tiny_EVB_MX_Plus
TREE_LIB_ENABLE=1
lib=
subdirs =
LSRCS += $(QTOP)/examples/hello_world/hello_world.c
LSRCS += $(wildcard *.s)
all::
make -C ${QTOP}/arch BP=${BP}
make -C ${QTOP}/board/TencentOS_tiny_EVB_MX_Plus/BSP BP=${BP}
make -C ${QTOP}/components/connectivity/Eclipse-Paho-MQTT BP=${BP}
make -C ${QTOP}/devices BP=${BP}
make -C ${QTOP}/kernel BP=${BP}
make -C ${QTOP}/net/at BP=${BP}
make -C ${QTOP}/net/sal_module_wrapper BP=${BP}
make -C ${QTOP}/net/socket_wrapper BP=${BP}
make -C ${QTOP}/net/tencent_firmware_module_wrapper BP=${BP}
make -C ${QTOP}/osal BP=${BP}
make -C ${QTOP}/platform BP=${BP}
#exec =
LD_A_FILES += $(LIBDIR)/libarch.a
LD_A_FILES += $(LIBDIR)/libkernel.a
#LD_A_FILES += $(LIBDIR)/lib$(notdir $(CUR_DIR)).a
LD_A_FILES += $(LIBDIR)/libcmsis_os.a
LD_A_FILES += $(LIBDIR)/libvendor_bsp.a
LD_A_FILES += $(LIBDIR)/libBSP.a
LD_A_LISTS += -lc -lm -lnosys
LD_L_LISTS += -specs=nosys.specs -T$(CUR_DIR)/STM32L431RCTx_FLASH.ld -Wl,-Map=$(LIBDIR)/$(notdir $(CUR_DIR)).map,--cref -Wl,--gc-sections
include ${QTOP}/qmk/generic/Make.exec

View File

@@ -0,0 +1,203 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
** Author : Auto-generated by Ac6 System Workbench
**
** Abstract : Linker script for STM32L431RCTx series
** 256Kbytes FLASH and 64Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed “as is,” without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of Ac6 nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20010000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(8);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(8);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(8);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(8);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(8);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(8);
} >FLASH
.ARM.extab :
{
. = ALIGN(8);
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(8);
} >FLASH
.ARM : {
. = ALIGN(8);
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
. = ALIGN(8);
} >FLASH
.preinit_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(8);
} >FLASH
.init_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(8);
} >FLASH
.fini_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
. = ALIGN(8);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(8);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(8);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@@ -0,0 +1,474 @@
/**
******************************************************************************
* @file startup_stm32l431xx.s
* @author MCD Application Team
* @brief STM32L431xx devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* Atollic update: set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex-M4. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_PVM_IRQHandler
.word TAMP_STAMP_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word 0
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SDMMC1_IRQHandler
.word 0
.word SPI3_IRQHandler
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word 0
.word COMP_IRQHandler
.word LPTIM1_IRQHandler
.word LPTIM2_IRQHandler
.word 0
.word DMA2_Channel6_IRQHandler
.word DMA2_Channel7_IRQHandler
.word LPUART1_IRQHandler
.word QUADSPI_IRQHandler
.word I2C3_EV_IRQHandler
.word I2C3_ER_IRQHandler
.word SAI1_IRQHandler
.word 0
.word SWPMI1_IRQHandler
.word TSC_IRQHandler
.word 0
.word 0
.word RNG_IRQHandler
.word FPU_IRQHandler
.word CRS_IRQHandler
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_PVM_IRQHandler
.thumb_set PVD_PVM_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak COMP_IRQHandler
.thumb_set COMP_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak DMA2_Channel6_IRQHandler
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
.weak DMA2_Channel7_IRQHandler
.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak QUADSPI_IRQHandler
.thumb_set QUADSPI_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@@ -0,0 +1,68 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
export QTOP
####################################################################
export BP=TencentOS_tiny_EVB_MX_Plus
TREE_LIB_ENABLE=1
lib=
subdirs =
LSRCS += $(QTOP)/examples/tencent_os_mqtt/mqtt_example.c
LSRCS += $(wildcard *.s)
all::
make -C ${QTOP}/arch BP=${BP}
make -C ${QTOP}/board/TencentOS_tiny_EVB_MX_Plus/BSP BP=${BP}
make -C ${QTOP}/components/connectivity/Eclipse-Paho-MQTT BP=${BP}
make -C ${QTOP}/devices BP=${BP}
make -C ${QTOP}/kernel BP=${BP}
make -C ${QTOP}/net/at BP=${BP}
make -C ${QTOP}/net/sal_module_wrapper BP=${BP}
make -C ${QTOP}/net/socket_wrapper BP=${BP}
make -C ${QTOP}/net/tencent_firmware_module_wrapper BP=${BP}
make -C ${QTOP}/osal BP=${BP}
make -C ${QTOP}/platform BP=${BP}
#exec =
LD_A_FILES += $(LIBDIR)/libarch.a
LD_A_FILES += $(LIBDIR)/libkernel.a
LD_A_FILES += $(LIBDIR)/lib$(notdir $(CUR_DIR)).a
LD_A_FILES += $(LIBDIR)/libcmsis_os.a
LD_A_FILES += $(LIBDIR)/libvendor_bsp.a
LD_A_FILES += $(LIBDIR)/libhal.a
LD_A_FILES += $(LIBDIR)/libBSP.a
LD_A_FILES += $(LIBDIR)/libEclipse-Paho-MQTT.a
LD_A_FILES += $(LIBDIR)/libesp8266_tencent_firmware.a
LD_A_FILES += $(LIBDIR)/libesp8266.a
LD_A_FILES += $(LIBDIR)/libat.a
LD_A_FILES += $(LIBDIR)/libtencent_firmware_module_wrapper.a
LD_A_FILES += $(LIBDIR)/libsal_module_wrapper.a
LD_A_FILES += $(LIBDIR)/libsocket_wrapper.a
LD_A_LISTS += -lc -lm -lnosys
LD_L_LISTS += -specs=nosys.specs -T$(CUR_DIR)/STM32L431RCTx_FLASH.ld -Wl,-Map=$(LIBDIR)/$(notdir $(CUR_DIR)).map,--cref -Wl,--gc-sections
include ${QTOP}/qmk/generic/Make.exec

View File

@@ -0,0 +1,203 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
** Author : Auto-generated by Ac6 System Workbench
**
** Abstract : Linker script for STM32L431RCTx series
** 256Kbytes FLASH and 64Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed “as is,” without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of Ac6 nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20010000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(8);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(8);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(8);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(8);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(8);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(8);
} >FLASH
.ARM.extab :
{
. = ALIGN(8);
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(8);
} >FLASH
.ARM : {
. = ALIGN(8);
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
. = ALIGN(8);
} >FLASH
.preinit_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(8);
} >FLASH
.init_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(8);
} >FLASH
.fini_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
. = ALIGN(8);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(8);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(8);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@@ -0,0 +1,474 @@
/**
******************************************************************************
* @file startup_stm32l431xx.s
* @author MCD Application Team
* @brief STM32L431xx devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* Atollic update: set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex-M4. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_PVM_IRQHandler
.word TAMP_STAMP_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word 0
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SDMMC1_IRQHandler
.word 0
.word SPI3_IRQHandler
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word 0
.word COMP_IRQHandler
.word LPTIM1_IRQHandler
.word LPTIM2_IRQHandler
.word 0
.word DMA2_Channel6_IRQHandler
.word DMA2_Channel7_IRQHandler
.word LPUART1_IRQHandler
.word QUADSPI_IRQHandler
.word I2C3_EV_IRQHandler
.word I2C3_ER_IRQHandler
.word SAI1_IRQHandler
.word 0
.word SWPMI1_IRQHandler
.word TSC_IRQHandler
.word 0
.word 0
.word RNG_IRQHandler
.word FPU_IRQHandler
.word CRS_IRQHandler
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_PVM_IRQHandler
.thumb_set PVD_PVM_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak COMP_IRQHandler
.thumb_set COMP_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak DMA2_Channel6_IRQHandler
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
.weak DMA2_Channel7_IRQHandler
.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak QUADSPI_IRQHandler
.thumb_set QUADSPI_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@@ -0,0 +1,68 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
export QTOP
####################################################################
export BP=TencentOS_tiny_EVB_MX_Plus
TREE_LIB_ENABLE=1
lib=
subdirs =
LSRCS += $(QTOP)/examples/udp_through_module/udp_through_module.c
LSRCS += $(wildcard *.s)
all::
make -C ${QTOP}/arch BP=${BP}
make -C ${QTOP}/board/TencentOS_tiny_EVB_MX_Plus/BSP BP=${BP}
make -C ${QTOP}/components/connectivity/Eclipse-Paho-MQTT BP=${BP}
make -C ${QTOP}/devices BP=${BP}
make -C ${QTOP}/kernel BP=${BP}
make -C ${QTOP}/net/at BP=${BP}
make -C ${QTOP}/net/sal_module_wrapper BP=${BP}
make -C ${QTOP}/net/socket_wrapper BP=${BP}
make -C ${QTOP}/net/tencent_firmware_module_wrapper BP=${BP}
make -C ${QTOP}/osal BP=${BP}
make -C ${QTOP}/platform BP=${BP}
#exec =
LD_A_FILES += $(LIBDIR)/libarch.a
LD_A_FILES += $(LIBDIR)/libkernel.a
LD_A_FILES += $(LIBDIR)/lib$(notdir $(CUR_DIR)).a
LD_A_FILES += $(LIBDIR)/libcmsis_os.a
LD_A_FILES += $(LIBDIR)/libvendor_bsp.a
LD_A_FILES += $(LIBDIR)/libhal.a
LD_A_FILES += $(LIBDIR)/libBSP.a
LD_A_FILES += $(LIBDIR)/libEclipse-Paho-MQTT.a
LD_A_FILES += $(LIBDIR)/libesp8266_tencent_firmware.a
LD_A_FILES += $(LIBDIR)/libesp8266.a
LD_A_FILES += $(LIBDIR)/libat.a
LD_A_FILES += $(LIBDIR)/libtencent_firmware_module_wrapper.a
LD_A_FILES += $(LIBDIR)/libsal_module_wrapper.a
LD_A_FILES += $(LIBDIR)/libsocket_wrapper.a
LD_A_LISTS += -lc -lm -lnosys
LD_L_LISTS += -specs=nosys.specs -T$(CUR_DIR)/STM32L431RCTx_FLASH.ld -Wl,-Map=$(LIBDIR)/$(notdir $(CUR_DIR)).map,--cref -Wl,--gc-sections
include ${QTOP}/qmk/generic/Make.exec

View File

@@ -0,0 +1,203 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
** Author : Auto-generated by Ac6 System Workbench
**
** Abstract : Linker script for STM32L431RCTx series
** 256Kbytes FLASH and 64Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed “as is,” without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of Ac6 nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20010000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(8);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(8);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(8);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(8);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(8);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(8);
} >FLASH
.ARM.extab :
{
. = ALIGN(8);
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(8);
} >FLASH
.ARM : {
. = ALIGN(8);
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
. = ALIGN(8);
} >FLASH
.preinit_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(8);
} >FLASH
.init_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(8);
} >FLASH
.fini_array :
{
. = ALIGN(8);
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
. = ALIGN(8);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(8);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(8);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@@ -0,0 +1,474 @@
/**
******************************************************************************
* @file startup_stm32l431xx.s
* @author MCD Application Team
* @brief STM32L431xx devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure the clock system
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* Atollic update: set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex-M4. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler
.word PVD_PVM_IRQHandler
.word TAMP_STAMP_IRQHandler
.word RTC_WKUP_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_IRQHandler
.word CAN1_TX_IRQHandler
.word CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_TIM15_IRQHandler
.word TIM1_UP_TIM16_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word 0
.word 0
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTC_Alarm_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SDMMC1_IRQHandler
.word 0
.word SPI3_IRQHandler
.word 0
.word 0
.word TIM6_DAC_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_IRQHandler
.word DMA2_Channel5_IRQHandler
.word 0
.word 0
.word 0
.word COMP_IRQHandler
.word LPTIM1_IRQHandler
.word LPTIM2_IRQHandler
.word 0
.word DMA2_Channel6_IRQHandler
.word DMA2_Channel7_IRQHandler
.word LPUART1_IRQHandler
.word QUADSPI_IRQHandler
.word I2C3_EV_IRQHandler
.word I2C3_ER_IRQHandler
.word SAI1_IRQHandler
.word 0
.word SWPMI1_IRQHandler
.word TSC_IRQHandler
.word 0
.word 0
.word RNG_IRQHandler
.word FPU_IRQHandler
.word CRS_IRQHandler
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_PVM_IRQHandler
.thumb_set PVD_PVM_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM15_IRQHandler
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
.weak TIM1_UP_TIM16_IRQHandler
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_IRQHandler
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
.weak DMA2_Channel5_IRQHandler
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
.weak COMP_IRQHandler
.thumb_set COMP_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak LPTIM2_IRQHandler
.thumb_set LPTIM2_IRQHandler,Default_Handler
.weak DMA2_Channel6_IRQHandler
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
.weak DMA2_Channel7_IRQHandler
.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
.weak LPUART1_IRQHandler
.thumb_set LPUART1_IRQHandler,Default_Handler
.weak QUADSPI_IRQHandler
.thumb_set QUADSPI_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak SWPMI1_IRQHandler
.thumb_set SWPMI1_IRQHandler,Default_Handler
.weak TSC_IRQHandler
.thumb_set TSC_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak CRS_IRQHandler
.thumb_set CRS_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@@ -247,4 +247,4 @@ clean:
####################################### #######################################
-include $(wildcard $(BUILD_DIR)/*.d) -include $(wildcard $(BUILD_DIR)/*.d)
# *** EOF *** # *** EOF ***

33
components/Makefile Normal file
View File

@@ -0,0 +1,33 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,50 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -std=c99
CFGFLAGS += -I$(CUR_DIR)/3rdparty/NimBLE_1_2_0/nimble/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/NimBLE_1_2_0/nimble/controller/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/NimBLE_1_2_0/nimble/drivers/native/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/NimBLE_1_2_0/nimble/controller/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/NimBLE_1_2_0/ext/tinycrypt/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/NimBLE_1_2_0/porting/nimble/include
CFGFLAGS += -I$(CUR_DIR)/porting/TencentOS_tiny/include
CFGFLAGS += -I$(CUR_DIR)/porting/TencentOS_tiny/include/nrf52832
LSRCS_DIRS += 3rdparty/NimBLE_1_2_0/ext
LSRCS_DIRS += 3rdparty/NimBLE_1_2_0/nimble
LSRCS_EXCLUDE_FILES = $(wildcard 3rdparty/NimBLE_1_2_0/nimble/controller/test/src/*.c)
LSRCS_EXCLUDE_FILES += $(wildcard 3rdparty/NimBLE_1_2_0/nimble/drivers/nrf52/*)
LSRCS_EXCLUDE_FILES += $(wildcard 3rdparty/NimBLE_1_2_0/nimble/drivers/nrf51/*)
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,42 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(realpath $(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=1
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/3rdparty/include
CFGFLAGS += -I$(CUR_DIR)/wrapper/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
LSRCS_DIR += 3rdparty/src
LSRCS_DIR += wrapper/src
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,42 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -std=c99
CFGFLAGS += -I$(CUR_DIR)/porting/TencentOS_Tiny
CFGFLAGS += -I$(CUR_DIR)/3rdparty/freemodbus-v1.6/modbus/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/freemodbus-v1.6/modbus/rtu
CFGFLAGS += -I$(CUR_DIR)/3rdparty/freemodbus-v1.6/modbus/ascii
LSRCS_DIRS += 3rdparty/freemodbus-v1.6/modbus
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,42 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
#CFGFLAGS += -std=c99
#LSRCS_DIRS += 3rdparty/NimBLE_1_2_0/ext
#LSRCS_DIRS += 3rdparty/NimBLE_1_2_0/nimble
#LSRCS_EXCLUDE_FILES = $(wildcard 3rdparty/NimBLE_1_2_0/nimble/controller/test/src/*.c)
#LSRCS_EXCLUDE_FILES += $(wildcard 3rdparty/NimBLE_1_2_0/nimble/drivers/nrf52/*)
#LSRCS_EXCLUDE_FILES += $(wildcard 3rdparty/NimBLE_1_2_0/nimble/drivers/nrf51/*)
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,39 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
SUBDIRS_FIND=$(patsubst ./%,%,$(shell find . -type d))
CFGFLAGS += -std=c99
CFGFLAGS += -DSALOF_USING_TENCENTOS
CFGFLAGS += $(addprefix -I$(CUR_DIR)/, $(SUBDIRS_FIND))
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -1,4 +1,4 @@
include $(SCRIPT_DIR)/internal_make_funcs.mk -include $(SCRIPT_DIR)/internal_make_funcs.mk
SETTING_VARS := \ SETTING_VARS := \
BUILD_TYPE \ BUILD_TYPE \

View File

@@ -0,0 +1,50 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(realpath $(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=1
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/3rdparty/include
CFGFLAGS += -I$(CUR_DIR)/3rdparty/include/exports
CFGFLAGS += -I$(CUR_DIR)/3rdparty/platform/at_device/esp8266
CFGFLAGS += -I$(CUR_DIR)/3rdparty/sdk_src/internal_inc
CFGFLAGS += -I$(CUR_DIR)/3rdparty/external_libs/mbedtls/include
#CFGFLAGS += -Werror
CFGFLAGS += -Wall -Wno-error=sign-compare -Wno-error=format -Os -pthread -DFORCE_SSL_VERIFY
#包含需要排除plaform/os的.c源码文件, 故自定义LSRC
LSRCS_EXCLUDE := $(sort $(shell find 3rdparty/platform/os -name "*.c" -o -name "*.cpp" -o -name "*.s" -o -name "*.cc" -o -name "*.C"))
LSRCS_EXCLUDE += $(sort $(shell find 3rdparty/samples -name "*.c" -o -name "*.cpp" -o -name "*.s" -o -name "*.cc" -o -name "*.C"))
#SCRIPT_DIR=$(CUR_DIR)/3rdparty/tools/build_scripts/
#include $(CUR_DIR)/3rdparty/make.settings
#include $(CUR_DIR)/3rdparty/tools/build_scripts/parse_make_settings.mk
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/components/fs/vfs/include
CFGFLAGS += -I$(CUR_DIR)/common/include
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,35 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/base64/include
include ${QTOP}/qmk/generic/Make.tpl

37
components/fs/Makefile Normal file
View File

@@ -0,0 +1,37 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/components/fs/fatfs/wrapper/include
CFGFLAGS += -I$(QTOP)/components/fs/vfs/include
CFGFLAGS += -I$(QTOP)/components/fs/kv/include
include ${QTOP}/qmk/generic/Make.tpl

35
components/gui/Makefile Normal file
View File

@@ -0,0 +1,35 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/LittlevGL/3rdparty
include ${QTOP}/qmk/generic/Make.tpl

47
components/ota/Makefile Normal file
View File

@@ -0,0 +1,47 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/common/lzma/wrapper
CFGFLAGS += -I$(CUR_DIR)/common/lzma/3rdparty
CFGFLAGS += -I$(CUR_DIR)/common/flash
CFGFLAGS += -I$(CUR_DIR)/common/partition
CFGFLAGS += -I$(CUR_DIR)/common/crc
CFGFLAGS += -I$(CUR_DIR)/common/image
CFGFLAGS += -I$(CUR_DIR)/common/env
CFGFLAGS += -I$(CUR_DIR)/common/info
CFGFLAGS += -I$(CUR_DIR)/common/diff
CFGFLAGS += -I$(CUR_DIR)/recovery/include
CFGFLAGS += -I$(CUR_DIR)/download/include
CFGFLAGS += -I$(QTOP)/components/fs/kv/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/mbedtls/3rdparty/include
CFGFLAGS += -I$(CUR_DIR)/mbedtls/3rdparty/include/mbedtls
CFGFLAGS += -I$(CUR_DIR)/mbedtls/wrapper/include
include ${QTOP}/qmk/generic/Make.tpl

33
components/shell/Makefile Normal file
View File

@@ -0,0 +1,33 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,35 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/include
include ${QTOP}/qmk/generic/Make.tpl

33
components/utils/Makefile Normal file
View File

@@ -0,0 +1,33 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

32
devices/Makefile Normal file
View File

@@ -0,0 +1,32 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

36
devices/air724/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

36
devices/bc26/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

36
devices/ec20/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

36
devices/esp8266/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,38 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
CFGFLAGS += -I$(QTOP)/net/tencent_firmware_module_wrapper
CFGFLAGS += -std=c99
include ${QTOP}/qmk/generic/Make.tpl

36
devices/m26/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

37
devices/m5310a/Makefile Normal file
View File

@@ -0,0 +1,37 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
CFGFLAGS += -std=c99
include ${QTOP}/qmk/generic/Make.tpl

36
devices/m6312/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

34
devices/nrf24l01/Makefile Normal file
View File

@@ -0,0 +1,34 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

36
devices/sim800a/Makefile Normal file
View File

@@ -0,0 +1,36 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,333 @@
# QmkQuick Makefile
## 1. 介绍
### Qmk 是什么
qmk 是TecentOS的一个Makefile编译框架。
### Qmk 的特点
- 使用简单任意目录均可make支持帮助`make help`
- 支持Makefile调试任何 目录`make BP= dm`打印Makefile 的所有变量值。
- 支持编译调试, `make V=1``Make V=2`
- 支持宏扩展调试。`make E=1`
- 目录分离。源码,编译产物目录分离。
- 入门简单,新源码目录 Makefile 拷贝即可使用;
- 多架构支持。支持多种 MCU ARCH、多种CC工具链
- 模板化。多种场景的Makefile拷贝即用;
- 配置化。board-pack提供mcu/arch/bsp等编译时参数、目录的配置
- 耦合低。跟源码目录结构的耦合低;
- 子目录单独make支持。支持子目录编译.a静态库
## TencentOS的make编译
### TencentOS的整体make
```shell
# 进入board目录支持qmk的board
cd board/TencentOS_tiny_EVB_MX_Plus/GCC-QMK
# 本目录编译
make
# 查看帮助
make help
```
TencentOS的整体编译过程是
- 先编译静态库
3.`board/`下的顶级Makefile开始该Makefile 确定了BP 。
3. Makefile 通过 `make -C BP=`访问各个目录BP用于选择`qmk/board-pack`下的一个`bp.xxx`作为编译参数集合。
3. `make -C BP=` 进入 `arch/` `kernel/` `platform/vendor_bsp`等需要的目录。
3. make进入各个目录根据`BP`,生成对应的`.a`静态库,如访问 `arch/`, 生成`libarch.a`具备编译哪些arch/下的源码文件由`board-pack`确定。
3. make递归访问其他源码目录目录的`节点Makefile`通过BP渲染`include Make.tpl`模板生成。
3. 依据目录的`节点Makefile`,生成`libxxx.a`
3. 各个源码目录节点,依次生成`.a`静态库文件,均位于 `build/`目录下 。
- 再链接
3. make 回到 `board/`的顶级Makefile。
3. 需要链接生成`elf`的目录通过`include Make.exec`
3. 编译本目录及其子目录下所有源文件,生成`.o`文件。
3. 根据 `LD_A_FILES``LD_L_LISTS`进行链接。
3. 整体链接完成,生成文件位于`build/`目录下。
### TecentOS的子目录make
```shell
# 进入某包含Makefile的目录
cd kernel/
# 本目录编译使用Linux_Posix作为Board-Pack
make BP=Linux_Posix
# 本目录编译使用TencentOS_tiny_EVB_MX_Plus作为Board-Pack
make BP=TencentOS_tiny_EVB_MX_Plus
# 查看帮助
make help
```
单目录的编译过程是:
3. make访问本目录读取本目录Makefile根据命令行`make BP=xxx`的BP选择`mk/board-pack`
3. 根据BP选择的构建参数。
3. 使用ar进行打包.a 文件放在`build/`目录。
3. 构建完成。
## Qmk 的概念
### generic-Makefile(mk/generic)
`qmk/generic/Make.tpl` 属于这类。
又称全局通用型Makefile模板。位于 `mk/generic)`
要求对所有board、所有gcc-toolchain、cpu、arch、bsp适用。
所以一般只包含通用的规则。
### boardpack-Makefile(mk/board-pack)
`board-pack/bp.TencentOS_tiny_EVB_MX_Plus` 属于这类。
又称板级Makefile模板。是一个硬件产品工程开发过程中在编译时的参数抽象文件。
位于mk/board-pack 的 bp.${BP}属于board配置型Makefile需要确定工具链mcuarch、board、bsp等方面的编译时参数集合。
嵌入式应用开发工程师主要修改这部分Makefile。
### srctree-Makefile
`kernel/Makefile` `arch/Makefile` 都属于这类。
又称节点Makefile位于各个源码目录的 Makefile。多个board都适用的Makefile属于源码节点配置型Makefile。
不能包含archboard级别的编译参数。
### link-Makefile
`board/TencentOS_tiny_EVB_MX_Plus/GCC-QMK/app_tencent_os_mqtt/Makefile` 属于这类。
## Qmk 的使用
### 当前目录所有.c编译成一个.a库
`这类Makefile编写参考 osal/posix/Makefile`
复制粘贴 以下 Makefile 内容到源码目录 Makefile。
无需修改。
>
>3. 注意`TREE_LIB_ENABLE=0`,cc和ar时只搜索当前目录源码不包含子目录
>
>3. 注意`lib=`,表示链接后的库名使用目录名;
>3. 有特别的CFLAG请根据情况配置 `CFGFLAGS`
>3. 注意板级的编译参数请配置到pack-Makefile否则会导致其他pack编译报错.
```Makefile
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/include
include ${QTOP}/qmk/generic/Make.tpl
```
### 某目录及其子目录的所有.c编译成一个.a库
`这类Makefile编写参考 kernel/Makefile`
复制粘贴 以下 Makefile 内容到源码目录 Makefile。
无需修改。
有特别的CFLAG请根据情况配置 `CFGFLAGS`
>
>3. 注意`TREE_LIB_ENABLE=1`,cc和ar时会递归搜索源码包含当前目录及其子目录。
>
>3. 注意`lib=`,表示链接后的库名使用目录名;
>3. 注意板级的编译参数请配置到pack-Makefile否则会导致其他pack编译报错.
>
```Makefile
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=1
lib=
subdirs=
CFGFLAGS += -I${QTOP}/kernel/core/include
CFGFLAGS += -I${QTOP}/kernel/evtdrv/include
CFGFLAGS += -I${QTOP}/kernel/hal/include
CFGFLAGS += -I${QTOP}/kernel/pm/include
include ${QTOP}/qmk/generic/Make.tpl
```
### 当前目录进入所有子目录、进入指定目录编译
`这类Makefile编写参考 platform/Makefile`
复制粘贴 以下 Makefile 内容到源码目录 Makefile。
无需修改。
有特别的CFLAG请根据情况配置 `CFGFLAGS`
>注意` subdirs=`为空,默认会进入所有子目录。
> 如果需要指定子目录请给`subdirs`赋值。
>
```Makefile
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl
```
### 新增一个 board-pack支持新的board
参考 `mk/board-pack/`下的各个文件。
参考 `qmk/board-pack/bp.TencentOS_tiny_EVB_MX_Plus`
board-pack 是对 board 在编译时的一个抽象。
一个board 确定了 MCU、 arch、工具链把这些编译时参数写成一个bp.xxx。
新整一个board-pack的步骤
- qmk/board-pack/目录下新建一个bp.xxx.
- 在bp.xxx定义以下变量
注意 CFGFLAGS 需要包括 cpu、arch、board 等类型的FLAG。
赋值建议用`+=`,不允许用 `:=`。注意 可以引用`QTOP``BLDROOT`变量,不建议引用其他`qmk/generic/`模板的变量。
| Makefile变量名 | 变量赋值举例 | 变量说明 |
| :-------- | ------ | :--------------------- |
| CROSS_COMPILE | CROSS_COMPILE =arm-none-eabi- | 工具链前缀 |
| CC | CC = $(CROSS_COMPILE)gcc | 工具链 |
| CXX | CXX = $(CROSS_COMPILE)g++ | 工具链 |
| LD | LD = $(CROSS_COMPILE)ld | 工具链 |
| ARFLAGS | ARFLAGS = -rc | 工具链 |
| STRIP | STRIP = $(CROSS_COMPILE)strip| 工具链 |
| CFGFLAGS | 参考`bp.TencentOS_tiny_EVB_MX_Plus` | 对CFLAGS、CXXFLAGS 进行增加 |
| ARCH_LSRCS | 参考`bp.TencentOS_tiny_EVB_MX_Plus` | board-pack对应的arch/源码,`make -C arch/时需要编译的源码绝对路径或相对于QTOP的相对路径 |
| BSP_LSRCS | 参考`bp.TencentOS_tiny_EVB_MX_Plus` | board-pack对应的board/bsp源码 |
| PLATFORM_VENDOR_BSP_LSRCS | 参考`bp.TencentOS_tiny_EVB_MX_Plus` | board-pack对应的vendor_bsp 源码,`make -C platform/vendor_bsp时需要编译的源码 |
| PLATFORM_VENDOR_BSP_LSRCS | 参考`bp.TencentOS_tiny_EVB_MX_Plus` | board-pack对应的vendor_bsp 源码,`make -C platform/vendor_bsp时需要编译的源码 |
| PLATFORM_HAL_LSRCS | 参考`bp.TencentOS_tiny_EVB_MX_Plus` | board-pack对应的 hal 源码,`make -C platform/hal时 |
## Qmk 的模板的内置变量
| 变量名 |赋值| 变量值说明 | 值举例 |
| :-------- |:------|:------ |:------- |
|AR |bp中赋值| 工具链 | "arm-none-eabi-ar"|
|ARCH_LSRCS|bp中赋值| 进入arch/需要编译的源码绝对路径或相对于QTOP的源码路径 | "/root/democode/TencentOS-tiny/arch/arm/arm-v7m/cortex-m4/gcc/port_c.c /root/democode/TencentOS-tiny/arch/arm/arm-v7m/cortex-m4/gcc/port_s.S /root/democode/TencentOS-tiny/arch/arm/arm-v7m/common/tos_fault.c /root/democode/TencentOS-tiny/arch/arm/arm-v7m/common/tos_cpu.c /root/democode/TencentOS-tiny/arch/arm/arm-v7m/cortex-m4/gcc/port_c.c /root/democode/TencentOS-tiny/arch/arm/arm-v7m/cortex-m4/gcc/port_s.S /root/democode/TencentOS-tiny/arch/arm/arm-v7m/common/tos_fault.c /root/democode/TencentOS-tiny/arch/arm/arm-v7m/common/tos_cpu.c "|
|ARFLAGS |bp中赋值 | 工具链参数|ar 参数,含义见`ar --help`| "-rc"|
|BLDDIR |禁止赋值|标识.o等编译产物所在的目录跟源码LOCALDIR有关| "/root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos/arch"|
|BLDROOT |禁止赋值 | 标识编译产物位置目录。| "/root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos"|
|BLD_SUFFIX|禁止赋值 |编译产物位置目录的后缀名 | | ".tos"|
|BOBJS |禁止赋值 | 所有OBJ集合绝对路径 | "/root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos/arch/arm/arm-v7m/cortex-m4/gcc/port_c.o /root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos/arch/arm/arm-v7m/cortex-m4/gcc/port_s.o /root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos/arch/arm/arm-v7m/common/tos_fault.o /root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos/arch/arm/arm-v7m/common/tos_cpu.o"|
|CC | bp中赋值 |"arm-none-eabi-gcc"|
|CROSS_COMPILE | 工具链 | "arm-none-eabi-"|
|CURDIR |禁止赋值|标识当前Makefile 所在的目录 | "/root/democode/TencentOS-tiny/arch"|
|CUR_DIR |禁止赋值|标识当前Makefile 所在的目录 | "/root/democode/TencentOS-tiny/arch"|
|CUR_MK_NODE_DIR |禁止赋值|标识当前Makefile 所在的目录 | "/root/democode/TencentOS-tiny/arch"|
|CXX |bp中赋值| "arm-none-eabi-g++"|
|LD |bp中赋值| "arm-none-eabi-ld"|
|LDFLAGS |bp中赋值 | " "|
|LOBJS |禁止赋值|OBJ文件集合相对路径相对于当前Makefile目录 | "arm/arm-v7m/cortex-m4/gcc/port_c.o arm/arm-v7m/cortex-m4/gcc/port_s.o arm/arm-v7m/common/tos_fault.o arm/arm-v7m/common/tos_cpu.o"|
|LOCALDIR |禁止赋值|源码目录位置相对路径相对于QTOP | "arch"|
|LSRCS |禁止在bp中赋值可以在src-Makefile赋值|编译源代码文件集合相对路径相对于当前Makefile目录或者绝对路径 | "arm/arm-v7m/cortex-m4/gcc/port_c.c arm/arm-v7m/cortex-m4/gcc/port_s.S arm/arm-v7m/common/tos_fault.c arm/arm-v7m/common/tos_cpu.c "|
|QTOP |禁止赋值|源码一级目录| "/root/democode/TencentOS-tiny"|
|RANLIB |bp中赋值 | "arm-none-eabi-ranlib"|
|STRIP |bp中赋值| "arm-none-eabi-strip"|
|TREE_LIB_ENABLE |src-Makefile赋值非0 表示编译所有子目录源码| LSRCS是否把子目录源码 | "0"|
|lib |不建议赋值|`.a`库名变量,默认目录名| "libarch"|
|targetlib |禁止赋值| "/root/democode/TencentOS-tiny/build/TencentOS_tiny_EVB_MX_Plus.arm-none-eabi-gcc.tos/libarch.a"|
## qmk的 make 命令行参数
```cookie
make help
```
### make V=1 E=1
```cookie
# verbose打印编译时的命令
make V=1
# 调试头文件包含,宏扩展时很有用,会在生成`.o`文件的同时生成`.i`预处理文件
make E=1
```
```cookie
# verbose打印链接时的库搜索过程
make V=2
make V=3
```
## 调试Makefile
```cookie
#进入含Makefile的目录
make BP=TencentOS_tiny_EVB_MX_Plus dm
```
## Qmk 后续

38
kernel/Makefile Normal file
View File

@@ -0,0 +1,38 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=1
lib=
subdirs=
CFGFLAGS += -I${QTOP}/kernel/core/include
CFGFLAGS += -I${QTOP}/kernel/evtdrv/include
CFGFLAGS += -I${QTOP}/kernel/hal/include
CFGFLAGS += -I${QTOP}/kernel/pm/include
include ${QTOP}/qmk/generic/Make.tpl

35
net/Makefile Normal file
View File

@@ -0,0 +1,35 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=n
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl
include ${QTOP}/qmk/generic/Make.subdirs

34
net/at/Makefile Normal file
View File

@@ -0,0 +1,34 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=1
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,34 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

38
net/lwip/Makefile Normal file
View File

@@ -0,0 +1,38 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=y
lib=
subdirs=
CFGFLAGS += -I${CUR_DIR}/3rdparty/src/include
CFGFLAGS += -I${CUR_DIR}/port/include
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,34 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,35 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I${QTOP}/net/sal_module_wrapper
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,34 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

31
osal/Makefile Normal file
View File

@@ -0,0 +1,31 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs = cmsis_os
include ${QTOP}/qmk/generic/Make.tpl

34
osal/cmsis_os/Makefile Normal file
View File

@@ -0,0 +1,34 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

35
osal/posix/Makefile Normal file
View File

@@ -0,0 +1,35 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
CFGFLAGS += -I$(CUR_DIR)/include
include ${QTOP}/qmk/generic/Make.tpl

32
platform/Makefile Normal file
View File

@@ -0,0 +1,32 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
include ${QTOP}/qmk/generic/Make.tpl

47
platform/hal/Makefile Normal file
View File

@@ -0,0 +1,47 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
ifneq (help,$(findstring help,$(MAKECMDGOALS)))
ifeq (, $(strip ${BP}))
$(error when compile arch/, must specify BP obviously , see `make help`)
endif
include ${QTOP}/qmk/board-pack/bp.${BP}
ifeq (,$(strip ${PLATFORM_HAL_LSRCS}))
$(error when compile arch/, must specify PLATFORM_HAL_LSRCS on your bp.${BP} , see `make help`)
endif
endif
# arch src should be specify by bp
LSRCS := $(subst $(QTOP)/$(LOCALDIR)/,, ${PLATFORM_HAL_LSRCS})
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,47 @@
###################################################################
#automatic detection QTOP and LOCALDIR
CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
echo $$QTOP;\
else\
cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
dir=`cd ../;pwd`; \
if [ "$$dir" = "/" ] ; then \
echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
exit 1; \
fi ; \
cd $$dir; \
done ; \
pwd; \
fi)
QTOP ?= $(realpath ${TRYQTOP})
ifeq ($(QTOP),)
$(error Please run this in a tree)
endif
LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
####################################################################
TREE_LIB_ENABLE=0
lib=
subdirs=
ifneq (help,$(findstring help,$(MAKECMDGOALS)))
ifeq (, $(strip ${BP}))
$(error when compile arch/, must specify BP obviously, see `make help`)
endif
include ${QTOP}/qmk/board-pack/bp.${BP}
ifeq (,$(strip ${PLATFORM_VENDOR_BSP_LSRCS}))
$(error when compile arch/, must specify PLATFORM_VENDOR_BSP_LSRCS on your bp.${BP}, see `make help`)
endif
endif
# arch src should be specify by bp
LSRCS := $(subst $(QTOP)/$(LOCALDIR)/,, ${PLATFORM_VENDOR_BSP_LSRCS})
include ${QTOP}/qmk/generic/Make.tpl

View File

@@ -0,0 +1,80 @@
# toolchain
uname := $(shell uname -s)
ifeq ($(filter-out Linux Darwin,$(uname)),)
ifeq ($(shell uname -m),x86_64)
CROSS_COMPILE =
CC = $(CROSS_COMPILE)gcc
CXX = $(CROSS_COMPILE)g++
LD = $(CROSS_COMPILE)ld
AR = $(CROSS_COMPILE)ar
ARFLAGS = -rc
STRIP = $(CROSS_COMPILE)strip
RANLIB = $(CROSS_COMPILE)ranlib
else
CROSS_COMPILE =
CC = $(CROSS_COMPILE)gcc -m32
CXX = $(CROSS_COMPILE)g++ -m32
LD = $(CROSS_COMPILE)ld -melf_i386
AR = $(CROSS_COMPILE)ar
ARFLAGS = -rc
STRIP = $(CROSS_COMPILE)strip
RANLIB = $(CROSS_COMPILE)ranlib
endif
endif
# arch
CFGFLAGS += -I${QTOP}/arch/linux/common/include/
CFGFLAGS += -I${QTOP}/arch/linux/posix/gcc
ARCH_LSRCS += $(wildcard ${QTOP}/arch/linux/posix/gcc/*.c)
ARCH_LSRCS += $(wildcard ${QTOP}/arch/linux/common/*.c)
CFGFLAGS += -O0 -Wall -g2 -ggdb
CFGFLAGS += -I${QTOP}/board/Linux_Posix/hello_world/inc
CFGFLAGS += -I${QTOP}/osal/cmsis_os
CFGFLAGS += -I${QTOP}/kernel/core/include
CFGFLAGS += -I${QTOP}/kernel/evtdrv/include
CFGFLAGS += -I${QTOP}/kernel/hal/include
CFGFLAGS += -I${QTOP}/kernel/pm/include
# kernel
CFGFLAGS += -I${QTOP}/kernel/core/include
CFGFLAGS += -I${QTOP}/kernel/evtdrv/include
CFGFLAGS += -I${QTOP}/kernel/hal/include
CFGFLAGS += -I${QTOP}/kernel/pm/include
# CMSIS
CFGFLAGS += -I${QTOP}/osal/cmsis_os
#net
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
# components
CFGFLAGS += -I$(QTOP)/components/connectivity/Modbus/3rdparty/freemodbus-v1.6/modbus/include
CFGFLAGS += -I$(QTOP)/components/shell/include
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/mqttclient
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/mqtt
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/common
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/platform/TencentOS-tiny
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/network
CFGFLAGS += -I$(QTOP)/components/fs/kv/include
CFGFLAGS += -I$(QTOP)/components/ota/common/flash
CFGFLAGS += -I$(QTOP)/components/connectivity/Eclipse-Paho-MQTT/wrapper/include
CFGFLAGS += -I$(QTOP)/components/utils/JSON/include
# devices
# examples
CFGFLAGS += -I$(QTOP)/examples/event_driven_at_module/at_evtdrv/include

View File

@@ -0,0 +1,107 @@
CROSS_COMPILE =arm-none-eabi-
CC = $(CROSS_COMPILE)gcc
CXX = $(CROSS_COMPILE)g++
LD = $(CROSS_COMPILE)ld
AR = $(CROSS_COMPILE)ar
ARFLAGS = -rc
STRIP = $(CROSS_COMPILE)strip
RANLIB = $(CROSS_COMPILE)ranlib
# debug
CFGFLAGS += -g -gdwarf-2
# cpu
###################################
# cpu/fpu/float-abi
CFGFLAGS += -mcpu=cortex-m4
CFGFLAGS += -mfpu=fpv4-sp-d16
CFGFLAGS += -mfloat-abi=hard -mthumb
# Device
CFGFLAGS += -DUSE_HAL_DRIVER -DSTM32L431xx
CFGFLAGS += -Wall -fdata-sections -ffunction-sections
# arch
CFGFLAGS += -I$(QTOP)/arch/arm/arm-v7m/common/include
CFGFLAGS += -I$(QTOP)/arch/arm/arm-v7m/cortex-m4/gcc
ARCH_LSRCS += $(wildcard ${QTOP}/arch/arm/arm-v7m/cortex-m4/gcc/*.c)
ARCH_LSRCS += $(wildcard ${QTOP}/arch/arm/arm-v7m/cortex-m4/gcc/*.s)
ARCH_LSRCS += $(wildcard ${QTOP}/arch/arm/arm-v7m/cortex-m4/gcc/*.S)
ARCH_LSRCS += $(wildcard ${QTOP}/arch/arm/arm-v7m/common/*.c)
ARCH_LSRCS += $(wildcard ${QTOP}/arch/arm/arm-v7m/common/*.s)
ARCH_LSRCS += $(wildcard ${QTOP}/arch/arm/arm-v7m/common/*.S)
# Board TOS
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/TOS-CONFIG
# CMSIS
CFGFLAGS += -I${QTOP}/osal/cmsis_os
#board BSP
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Inc
CFGFLAGS += -I$(QTOP)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Inc
CFGFLAGS += -I$(QTOP)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Inc/Legacy
CFGFLAGS += -I$(QTOP)/platform/vendor_bsp/st/CMSIS/Device/ST/STM32L4xx/Include
CFGFLAGS += -I$(QTOP)/platform/vendor_bsp/st/CMSIS/Include
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware/DHT11
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware/BH1750
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware/OLED
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware/PM25
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware/Modbus_Port
CFGFLAGS += -I$(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware/E53_IA1
BSP_LSRCS += $(shell find $(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Src -name "*.c" -o -name "*.s")
BSP_LSRCS += $(shell find $(QTOP)/board/TencentOS_tiny_EVB_MX_Plus/BSP/Hardware -name "*.c" -o -name "*.s")
#platform/vendor_bsp
PLATFORM_VENDOR_BSP_LSRCS += $(shell find $(QTOP)/platform/vendor_bsp/st/STM32L4xx_HAL_Driver/Src -name "*.c" -o -name "*.s")
PLATFORM_HAL_LSRCS += $(shell find $(QTOP)/platform/hal/st/stm32l4xx -name "*.c" -o -name "*.s")
# kernel
CFGFLAGS += -I${QTOP}/kernel/core/include
CFGFLAGS += -I${QTOP}/kernel/evtdrv/include
CFGFLAGS += -I${QTOP}/kernel/hal/include
CFGFLAGS += -I${QTOP}/kernel/pm/include
# CMSIS
CFGFLAGS += -I${QTOP}/osal/cmsis_os
#net
CFGFLAGS += -I$(QTOP)/net/at/include
CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
# components
CFGFLAGS += -I$(QTOP)/components/connectivity/Modbus/3rdparty/freemodbus-v1.6/modbus/include
CFGFLAGS += -I$(QTOP)/components/shell/include
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/mqttclient
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/mqtt
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/common
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/platform/TencentOS-tiny
CFGFLAGS += -I$(QTOP)/components/connectivity/mqttclient/network
CFGFLAGS += -I$(QTOP)/components/fs/kv/include
CFGFLAGS += -I$(QTOP)/components/ota/common/flash
CFGFLAGS += -I$(QTOP)/components/connectivity/Eclipse-Paho-MQTT/wrapper/include
CFGFLAGS += -I$(QTOP)/components/utils/JSON/include
# devices
CFGFLAGS += -I$(QTOP)/devices/esp8266
# examples
CFGFLAGS += -I$(QTOP)/examples/event_driven_at_module/at_evtdrv/include

50
qmk/generic/Make.debug Normal file
View File

@@ -0,0 +1,50 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
# Makefile template
# aim for debug makefile
########################################################################
ifeq ($(MAKELEVEL),0)
# Standard definitions for true and false. true is any non-empty
# string, false is an empty string. These are intended for use with
# $(if).
true := T
false :=
# ----------------------------------------------------------------------------
# Function: not
# Arguments: 1: A boolean value
# Returns: Returns the opposite of the arg. (true -> false, false -> true)
# ----------------------------------------------------------------------------
not = $(if $1,$(false),$(true))
# ----------------------------------------------------------------------------
# Function: seq
# Arguments: 1: A string to compare against...
# 2: ...this string
# Returns: Returns $(true) if the two strings are identical
# ----------------------------------------------------------------------------
seq = $(if $(filter-out xx,x$(subst $1,,$2)$(subst $2,,$1)x),$(false),$(true))
ifeq (dm,$(findstring dm,$(MAKECMDGOALS)))
$(info ###################All pre-defined and user-defined variable's Key:)
$(info $(shell echo -e '\e[1;33m $(sort $(.VARIABLES)) \e[m'))
$(info ###################All user-defined Variables:)
$(foreach v, $(sort $(.VARIABLES)),$(if $(call seq,$(origin ${v}),file), $(eval VV:=$(value ${v})) $(info $(shell echo -e '\e[1;33m ${v} \e[m = "$(VV)"' ))))
dm:
@true
endif
PHONY: dm
endif

46
qmk/generic/Make.depend Normal file
View File

@@ -0,0 +1,46 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
# Makefile template
########################################################################
ifeq (,$(findstring clean,$(MAKECMDGOALS)))
ifneq (help,$(findstring help,$(MAKECMDGOALS)))
all::
@true
#
# Attempt to build the depend files. If it fails, the depend file is
# removed so that it is not included in later builds.
#
#${BLDDIR}/%.P : %.c ${BLDDIR}/.tree
# @$(ECHO) "[$(BP)] DEP ${LOCALDIR}/$<"
#${BLDDIR}/%.P : %.cc ${BLDDIR}/.tree
# @$(ECHO) "[$(BP)] DEP ${LOCALDIR}/$<"
#
# If there are C or C++ files in this directory, include the
# depend files for them.
#
ifeq ($(findstring _COMPILER,$(MAKECMDGOALS))$(findstring variable,$(MAKECMDGOALS)),)
ifneq ($(strip ${LSRCS}),)
ifneq (,$(findstring .o,$(MAKECMDGOALS)))
-include $(addprefix ${BLDDIR}/,$(MAKECMDGOALS:.o=.P)) $(addprefix ${BLDDIR}/,$(MAKECMDGOALS:.o=.sig))
else
-include $(addprefix ${BLDDIR}/,$(addsuffix .P,$(basename $(LSRCS))))
-include $(addprefix ${BLDDIR}/,$(addsuffix .sig,$(basename $(LSRCS))))
endif
endif
endif
endif # help
endif # !CLEANING
clean_d::
ifeq (@,$(Q))
@$(ECHO) "[$(BP)] CLEAN DEPS ${LOCALDIR}"
endif
$Q$(RM) $(BOBJS:.o=.P)
clean:: clean_d

67
qmk/generic/Make.exec Normal file
View File

@@ -0,0 +1,67 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
########################################################################
# Make rules/targets for handling user application
.SECONDARY:: ${LD_O_FILES}
include $(QTOP)/qmk/generic/Make.tpl
ifeq (,$(strip $(exec)))
exec = $(shell basename $(shell dirname $(realpath $(firstword $(MAKEFILE_LIST)))))
endif
OUTDIR = ${BLDDIR}/out
targetexec = ${OUTDIR}/${exec}.elf
all:: ${OUTDIR}/.tree ${targetexec}
$(info $(wildcard $(BLDROOT)/%.a) )
ifeq (,$(LD_O_FILES))
LD_O_FILES = $(sort $(BOBJS))
endif
ifeq (2,$(V))
LD_INFO_OPTS := -Wl,--warn-common -Wl,--verbose
endif
ifeq (3,$(V))
LD_INFO_OPTS := -Wl,--warn-common -Wl,-Map,${OUTDIR}/${exec}.map -Wl,--verbose
endif
_LD_START_GROUP := -Wl,--start-group
_LD_END_GROUP := -Wl,--end-group
ifeq (,$(strip ${OBJCOPY}))
OBJCOPY=$(subst strip,objcopy,$(STRIP))
endif
$(targetexec): $(OUTDIR)/.tree ${LD_O_FILES}
@/bin/rm -f $@ # Prevent core dump if currently running
@$(ECHO) "[$(BP)] LINK $@" # This is needed for error parsing
$(Q)/bin/ls $(BLDROOT)
$(Q)$(CC) \
$(patsubst -I%,,${CFLAGS} ${EXTRA_CFLAGS} ${LDFLAGS}) \
-o $@ -L${BLDROOT} \
$(_LD_START_GROUP) $(LD_O_FILES) $(LD_A_FILES) $(_LD_END_GROUP) $(LD_L_LISTS) $(LD_INFO_OPTS)
$(Q)$(STRIP) --strip-debug $@ -o $(OUTDIR)/$(basename $(notdir $@)).strip
$(Q)$(OBJCOPY) -O binary -S $@ $(OUTDIR)/$(basename $(notdir $@)).bin
$(Q)$(OBJCOPY) -O ihex $@ $(OUTDIR)/$(basename $(notdir $@)).hex
$(CP) $(OUTDIR)/$(basename $(notdir $@)).* $(BLDROOT)/
@$(ECHO) -e "[$(BP)] INFO [$(BP)] INFO \e[1;32mLINK OK,OK,OK!!!\e[m"
@$(ECHO) -e "\e[1;32m$$(/bin/ls $(BLDROOT)/$(basename $(notdir $@)).*)\e[m"
install:: all
clean::
$(Q)$(RM) ${BOBJS}
$(Q)$(RM) $(filter %.a ,$(LD_A_FILES))
$(Q)$(RM) $(OUTDIR)/$(basename $(notdir ${targetexec})).*
$(Q)$(RM) $(BLDROOT)/$(basename $(notdir ${targetexec})).*
distclean:: clean
.PHONY: $(targetexec)

52
qmk/generic/Make.lib Normal file
View File

@@ -0,0 +1,52 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
# Makefile template
########################################################################
.SECONDARY:: ${BOBJS}
ifndef lib
lib = lib$(shell basename ${LOCALDIR})
endif
targetlib = ${BLDROOT}/${lib}.a
${BLDROOT}/%.a: ${BOBJS}
ifeq (@,$(Q))
@$(ECHO) "[$(BP)] ARLIB $(subst $(QTOP)/,,$@)"
endif
$Q$(RM) $@
$Q$(AR) ${ARFLAGS} $@ $(sort ${BOBJS})
# if objs is not empty, let make .a
ifneq (,$(strip ${BOBJS}))
all:: ${BLDDIR}/.tree ${targetlib}
$(targetlib): ${BOBJS}
ifneq (,${BOBJS})
ifeq (@,$(Q))
@$(ECHOE) "[$(BP)] ARLIB \e[1;32m$(subst $(QTOP)/,,$@) \e[m"
endif
$Q$(RM) $@
$Q$(AR) ${ARFLAGS} $@ $(sort ${BOBJS})
endif
install:: all
clean::
ifeq (@,$(Q))
$Q$(ECHO) "[$(BP)] ClEAN OBJS ${LOCALDIR}"
endif
$Q$(RM) ${BOBJS}
ifdef EEEE
$Q$(RM) ${BOBJS:.o=.i}
endif
$Q$(RM) ${targetlib}
distclean:: clean
endif

39
qmk/generic/Make.subdirs Normal file
View File

@@ -0,0 +1,39 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
# Makefile template
########################################################################
.PHONY: ${subdirs}
# only not treelib will do recursive subdir make
ifneq (,$(filter n no NO 0,$(TREE_LIB_ENABLE))) # no
# only have subdir, will do recursive subdir make
ifeq (,$(strip $(subdirs)))
subdirs = $(sort $(dir $(wildcard */Makefile)))
endif
ifneq (,$(strip ${subdirs}))
# target
all:: ${subdirs}
@true
${subdirs}::
ifeq (@,$(Q))
@$(ECHO) "[$(BP)] SUBDIR $(LOCALDIR)/$@ "
endif
$Q$(MAKE) -C $@ BP=${BP}
# target
clean clean_d install::
ifeq (@,$(Q))
@$(ECHO) "[$(BP)] $@ $(LOCALDIR)"
endif
@(for name in $(subdirs); do $(MAKE) -C $$name $@; done)
endif
endif

63
qmk/generic/Make.tools Normal file
View File

@@ -0,0 +1,63 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
# Makefile template
########################################################################
SYSOK = 0
ifneq "$(SYSNAME)" ""
SYSOK = 1 # already set from environment
endif
# unix or unix-type type hosts
ifeq "$(SYSOK)" "0"
SYSNAME := $(shell uname -s)
ifeq "$(SYSNAME)" "Linux"
SYSOK = 1
SED = /bin/sed
COMPRESS = /usr/bin/compress
GZIP = /usr/bin/gzip
TEST = /usr/bin/test
PERL = $(shell which perl)
LN = /bin/ln
TOUCH = /bin/touch
endif
ifeq "$(SYSNAME)" "Darwin"
SYSOK = 1
SED = /usr/bin/sed
COMPRESS = /usr/bin/compress
GZIP = /usr/bin/gzip
LZMA = LZMA_NOT_DEFINED
TEST = /bin/test
PERL = $(shell which perl)
LN = /bin/ln
TOUCH = /usr/bin/touch
endif
ifeq (MSYS_NT,$(findstring MSYS_NT,$(SYSNAME)))
SYSOK = 1
SED = /usr/bin/sed
COMPRESS = /usr/bin/compress
GZIP = /usr/bin/gzip
LZMA = LZMA_NOT_DEFINED
TEST = /bin/test
PERL = $(shell which perl)
LN = /bin/ln
TOUCH = /usr/bin/touch
endif
endif
#
# Platform Independent
#
RM = /bin/rm -rf
CP = /bin/cp
MKDIR = /bin/mkdir -p
MAKEDEP = /bin/echo
ECHO = /bin/echo -e
ECHOE = /bin/echo -e

289
qmk/generic/Make.tpl Normal file
View File

@@ -0,0 +1,289 @@
# QMK for TencentOS
# @author Jimmin.huang jimmin@163.com
# Makefile template
########################################################################
export QTOP
ALOWED_MAKE_VERSIONS :=3.82
ifeq ($(MAKELEVEL),0)
ifeq ($(filter $(ALOWED_MAKE_VERSIONS),$(MAKE_VERSION)),)
#$(info Make $(MAKE_VERSION) not be tested, use one of $(ALOWED_MAKE_VERSIONS))
$(info QMK for TOS)
endif
endif
ifeq ($(MAKELEVEL),0)
ifeq (help,$(findstring help,$(MAKECMDGOALS)))
NO_QMK_DEPS=1
endif
endif
# the top Makefile node that include this file
CUR_MK_NODE_DIR = $(shell dirname $(realpath $(firstword $(MAKEFILE_LIST))))
########################################################################
#
# Set a default BP if one is not set.
SUPPORT-BP := $(sort $(subst $(QTOP)/qmk/board-pack/bp.,, $(wildcard $(QTOP)/qmk/board-pack/bp.*)))
ifndef BP
uname := $(shell uname -s)
ifeq ($(filter-out Linux Darwin,$(uname)),)
BP=Linux_Posix
endif
ifndef BP
BP=native
$(info Can't determine BP, `make help` see usage )
endif
$(info assume default BP=${BP} )
endif
BP := ${BP}
export BP
#
# By default, turn off the "changing directory" message.
#
MAKEFLAGS += --no-print-directory
#
# Use gmake by default
#
include ${QTOP}/qmk/generic/Make.tools
include ${QTOP}/qmk/board-pack/bp.${BP}
########################################################################
INCFLAGS = -I${QTOP}/arch/header -I${CUR_MK_NODE_DIR} -I${CUR_MK_NODE_DIR}/include -I${CUR_MK_NODE_DIR}/inc
INCFLAGS += -DBP=\"$(BP)\" -DFILE_NAME=\"$(subst $(dir $<),,$<)\"
CFGFLAGS += ${INCFLAGS}
# STD_{C|CXX}FLAGS - Standard flags used by ALL compilations
# CFGFLAGS - Configuration flags used by ALL compilations
CFLAGS += ${STD_CFLAGS} ${CFGFLAGS} $(ADD_CFLAGS) $(GLOBAL_CFLAGS)
CXXFLAGS += ${STD_CXXFLAGS} ${CFGFLAGS} $(ADD_CFLAGS) $(GLOBAL_CFLAGS)
LDFLAGS += ${STD_LDFLAGS} ${CFGLDFLAGS} $(ADD_LDFLAGS) $(GLOBAL_LDFLAGS)
V ?= 0
# use to control printing of compilation lines
ifeq (0,$(V))
#no VERBOSE
Q:=@
else
# VERBOSE
Q:=
endif
#
# Default location to place binaries and make depend files for building
# purposes.
#
ifndef QTOPBUILD
QTOPBUILD :=build
endif
ifeq (,$(BLD_SUFFIX))
BLD_SUFFIX := .tos
endif
BLDROOT = ${QTOP}/${QTOPBUILD}/$(if ${BLDCONFIG},${BLDCONFIG}/)${BP}.$(notdir $(firstword $(CC)))${BLD_SUFFIX}
ifdef LOCALDIR
BLDDIR = ${BLDROOT}/${LOCALDIR}
else
BLDDIR = ${BLDROOT}
endif
LIBDIR = ${BLDROOT}
#
# In each directory, build a list of local sources, objects, and headers
#
ifeq (,$(strip ${LSRCS})) # LSRCS
ifeq (,$(filter n no NO 0,$(TREE_LIB_ENABLE))) # TREE_LIB_ENABLE yes
ifeq (,$(strip ${LSRCS_DIRS})) # LSRCS_DIRS
LSRCS_ALL = $(patsubst ./%,%, $(sort $(shell find . -name "*.c" -o -name "*.cpp" -o -name "*.s" -o -name "*.S" -o -name "*.cc")))
else
LSRCS_ALL = $(patsubst ./%,%, $(sort $(shell find ${LSRCS_DIRS} -name "*.c" -o -name "*.cpp" -o -name "*.s" -o -name "*.S" -o -name "*.cc")))
endif # LSRCS_DIRS
else # TREE_LIB_ENABLE
LSRCS_ALL = $(patsubst ./%,%,$(sort $(wildcard *.c *.cpp *.s *.S *.cc *.C))) # only include src in this dir.
endif # TREE_LIB_ENABLE
endif # LSRCS
ifneq (,$(strip ${LSRCS_EXCLUDE_FILES}))
$(info "ignore LSRCS_EXCLUDE_FILES source files: ${LSRCS_EXCLUDE_FILES}")
endif
ifndef LSRCS
LSRCS = $(filter-out $(patsubst ./%,%,${LSRCS_EXCLUDE_FILES}),${LSRCS_ALL})
else
$(info [$(BP)] INFO LSRCS defined by user, use `make V=1` verbose print )
ifneq (0,$(V))
$(info LSRCS=$(LSRCS)")
endif
endif
LOBJS = $(patsubst $(QTOP)/%,%,$(addsuffix .o, $(basename ${LSRCS})))
BOBJS = $(addprefix ${BLDDIR}/,${LOBJS})
#
# Rule to create object file (build) directory
#
.PHONY: all install clean
.PRECIOUS: ${BLDDIR}/.tree $(EXECDIR)
%/.tree:
@$(ECHO) "[$(BP)] MKDIR $(dir $@)"
$Q($(MKDIR) $(dir $@); $(TOUCH) $@)
# Rule allowing build through CPP only, creates .i file from .c file.
%.i: %.c
@$Q$(ECHO) "[$(BP)] EEEE ${LOCALDIR}/$<"
$Q$(CC) -E ${CFLAGS} $< | $(SED) -e '/^ *$$/d' -e p -e d > $@
# Rule allowing build through source only, creates .s file from .c file.
%.s: %.c
$Q$(CC) -S ${CFLAGS} $<
NO_QMK_DEPS = 1
# allow disabling of dependency file generation
# enable partial recompilation through use of included
# dependency makefiles
#
ifdef NO_QMK_DEPS
zDEPS_OPT = -MMD -MP -MF'$(@:%.o=%.d)' -Wa,-a,-ad,-alms='$(@:%.o=%.lst)'
endif # ifndef NO_QMK_DEPS
# No dependency files, faster compile times
# no partial compile support
zDEPS_SED =
zDEPS_CPY =
zDEPS_CMD = /bin/true
define zdo
$(eval C := $1)
$Q$C
endef
#
# Default Build rules for .c --> .o, leaving the binary in BLDDIR/X.o,
# even if file not built from directory of source.
#
${BLDDIR}/%.o: $(QTOP)/%.c
$Q$(MKDIR) $(dir $@)
$Q$(RM) -f $@
ifdef E
@$Q$(ECHO) '[$(BP)] EEEE ${LOCALDIR}/$<'
$Q$(CC) -E ${CFLAGS} $(EXTRA_CFLAGS) $< | $(SED) -e '/^ *$$/d' -e p -e d > $(@:.o=.i)
endif
ifdef S
@$Q$(ECHO) "[$(BP)] SSSS ${LOCALDIR}/$<"
$Q$(CC) -S ${CFLAGS} $<
endif
@$Q$(ECHO) "[$(BP)] CCCC $<"
$Q$(call zdo,$$(CC) $$(zDEPS_OPT) $$(CFLAGS) $$(EXTRA_CFLAGS) -o $$@ -c $$(realpath $$<)) && ($(zDEPS_CMD))
${BLDDIR}/%.o: %.c
$Q$(MKDIR) $(dir $@)
$Q$(RM) -f $@
ifdef E
@$Q$(ECHO) "[$(BP)] EEEE ${LOCALDIR}/$<"
$Q$(CC) -E ${CFLAGS} $(EXTRA_CFLAGS) $< | $(SED) -e '/^ *$$/d' -e p -e d > $(@:.o=.i)
endif
@$Q$(ECHO) "[$(BP)] CCCC ${LOCALDIR}/$<"
$Q$(call zdo,$$(CC) $$(zDEPS_OPT) $$(CFLAGS) $$(EXTRA_CFLAGS) -o $$@ -c $$(realpath $$<)) && ($(zDEPS_CMD))
${BLDDIR}/%.o: %.s
$Q$(MKDIR) $(dir $@)
$Q$(ECHO) "[$(BP)] ASAS ${LOCALDIR}/$<"
# $Q$(MKDIR) $(BLDDIR)/
# $Q$(MKDIR) $(dir $@)
$Q$(RM) -f $@
$Q$(CC) ${CFLAGS} ${EXTRA_CFLAGS} -o $@ -c $(realpath $<)
${BLDDIR}/%.o: %.S
$Q$(MKDIR) $(dir $@)
$Q$(ECHO) "[$(BP)] ASAS ${LOCALDIR}/$<"
$Q$(RM) -f $@
$Q$(CC) ${CFLAGS} ${EXTRA_CFLAGS} -o $@ -c $(realpath $<)
${BLDDIR}/%.o: %.cpp
$Q$(MKDIR) $(dir $@)
ifeq (@,$(Q))
@$(ECHO) "[$(BP)] CCCC ${LOCALDIR}/$<"
endif
$Q$(CXX) ${CXXFLAGS} -o $@ -c $(realpath $<)
${BLDDIR}/%.o: %.cc
$Q$(MKDIR) $(dir $@)
ifeq (@,$(Q))
@$(ECHO) "[$(BP)] CCCC ${LOCALDIR}/$<"
endif
$Q$(CXX) ${CXXFLAGS} -o $@ -c $(realpath $<)
#
# Cause "make foo.o" in any subdirectory to put the object in the build
# directory instead of the local directory.
#
%.o: ${BLDDIR}/%.o
@
#
# Targets for build
#
ifeq ($(MAKELEVEL),0)
ifeq (help,$(findstring help,$(MAKECMDGOALS)))
.PHONY: help
help:
$Q$(ECHO) "Usage:"
$Q$(ECHO) -e "\t make help"
$Q$(ECHO) -e "make for specified board-pack"
$Q$(foreach v, $(SUPPORT-BP), $(call zdo, $$(ECHO) -e "\t make BP=$$(v)") )
$Q$(ECHO) -e "\t BP dir are: $(QTOP)/qmk/board-pack/"
$Q$(ECHO) -e "Clean build"
$Q$(ECHO) -e "\t make clean all"
$Q$(ECHO) -e "Debug build, verbose print, generate preprocess .i for .c"
$Q$(ECHO) -e "\t make V=1 "
$Q$(ECHO) -e "\t make E=1 "
$Q$(ECHO) -e "Debug Makefile"
$Q$(ECHO) -e "\t make dm"
endif
endif
include ${QTOP}/qmk/generic/Make.lib
include ${QTOP}/qmk/generic/Make.subdirs
include ${QTOP}/qmk/generic/Make.depend
include ${QTOP}/qmk/generic/Make.debug