add kv fs component

1. a true wear-leveling kv fs for norflash, especially optimize for some onchip norflash with "write once on one single write unit" like stm32l4, a true "no earse before write" flash algorithm.
2. an "as less as possible" gc strategy, do best to save norflash's life.
3. full "power down protection" support
4. see "examples" of kv, project in "TencentOS_tiny_EVB_MX_Plus", with onchip flash and qspiflash sample.
This commit is contained in:
daishengdong
2019-12-19 16:08:42 +08:00
parent e1c19fd194
commit febcf10911
23 changed files with 8674 additions and 10 deletions

View File

@@ -0,0 +1,97 @@
// File: STM32L43x_44x_45x_46x.dbgconf
// Version: 1.0.0
// Note: refer to STM32L43xxx STM32L44xxx STM32L45xxx STM32L46xxx Reference manual (RM0394)
// refer to STM32L431xx, STM32L432xx, STM32L433xx, STM32L442xx, STM32L443xx, STM32L451xx, STM32L452xx, STM32L462xx datasheets
// <<< Use Configuration Wizard in Context Menu >>>
// <h> Debug MCU configuration register (DBGMCU_CR)
// <o0.2> DBG_STANDBY
// <i> Debug Standby mode
// <i> 0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
// <i> 1: (FCLK=On, HCLK=On) The digital part is not unpowered and FCLK and HCLK are provided by the internal RC oscillator which remains active
// <o0.1> DBG_STOP
// <i> Debug Stop mode
// <i> 0: (FCLK=Off, HCLK=Off) In STOP mode, the clock controller disables all clocks (including HCLK and FCLK).
// <i> 1: (FCLK=On, HCLK=On) When entering STOP mode, FCLK and HCLK are provided by the internal RC oscillator which remains active in STOP mode.
// <o0.0> DBG_SLEEP
// <i> Debug Sleep mode
// <i> 0: (FCLK=On, HCLK=Off) In Sleep mode, FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled.
// <i> 1: (FCLK=On, HCLK=On) When entering Sleep mode, HCLK is fed by the same clock that is provided to FCLK (system clock as previously configured by the software).
// </h>
DbgMCU_CR = 0x00000007;
// <h> Debug MCU APB1 freeze register1 (DBGMCU_APB1FZR1)
// <o0.31> DBG_LPTIM1_STOP
// <i> LPTIM1 counter stopped when core is halted
// <i> 0: The counter clock of LPTIM1 is fed even if the core is halted
// <i> 1: The counter clock of LPTIM1 is stopped when the core is halted
// <o0.25> DBG_CAN_STOP
// <i> bxCAN1 stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The bxCAN1 receive registers are frozen
// <o0.23> DBG_I2C3_STOP
// <i> I2C3 SMBUS timeout counter stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The I2C3 SMBus timeout is frozen
// <o0.22> DBG_I2C2_STOP
// <i> I2C2 SMBUS timeout counter stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The I2C2 SMBus timeout is frozen
// <o0.21> DBG_I2C1_STOP
// <i> I2C1 SMBUS timeout counter stopped when core is halted
// <i> 0: Same behavior as in normal mode
// <i> 1: The I2C1 SMBus timeout is frozen
// <o0.12> DBG_IWDG_STOP
// <i> Independent watchdog counter stopped when core is halted
// <i> 0: The independent watchdog counter clock continues even if the core is halted
// <i> 1: The independent watchdog counter clock is stopped when the core is halted
// <o0.11> DBG_WWDG_STOP
// <i> Window watchdog counter stopped when core is halted
// <i> 0: The window watchdog counter clock continues even if the core is halted
// <i> 1: The window watchdog counter clock is stopped when the core is halted
// <o0.10> DBG_RTC_STOP
// <i> RTC counter stopped when core is halted
// <i> 0: The clock of the RTC counter is fed even if the core is halted
// <i> 1: The clock of the RTC counter is stopped when the core is halted
// <o0.5> DBG_TIM7_STOP
// <i> TIM7 counter stopped when core is halted
// <i> 0: The counter clock of TIM7 is fed even if the core is halted
// <i> 1: The counter clock of TIM7 is stopped when the core is halted
// <o0.4> DBG_TIM6_STOP
// <i> TIM6 counter stopped when core is halted
// <i> 0: The counter clock of TIM6 is fed even if the core is halted
// <i> 1: The counter clock of TIM6 is stopped when the core is halted
// <o0.0> DBG_TIM2_STOP
// <i> TIM2 counter stopped when core is halted
// <i> 0: The counter clock of TIM2 is fed even if the core is halted
// <i> 1: The counter clock of TIM2 is stopped when the core is halted
// </h>
DbgMCU_APB1_Fz1 = 0x00000000;
// <h> Debug MCU APB1 freeze register 2 (DBGMCU_APB1FZR2)
// <o0.5> DBG_LPTIM2_STOP
// <i> LPTIM2 counter stopped when core is halted
// <i> 0: The counter clock of LPTIM2 is fed even if the core is halted
// <i> 1: The counter clock of LPTIM2 is stopped when the core is halted
// </h>
DbgMCU_APB1_Fz2 = 0x00000000;
// <h> Debug MCU APB2 freeze register (DBGMCU_APB2FZR)
// <o0.17> DBG_TIM16_STOP
// <i> TIM16 counter stopped when core is halted
// <i> 0: The clock of the TIM16 counter is fed even if the core is halted
// <i> 1: The clock of the TIM16 counter is stopped when the core is halted
// <o0.16> DBG_TIM15_STOP
// <i> TIM15 counter stopped when core is halted
// <i> 0: The clock of the TIM15 counter is fed even if the core is halted
// <i> 1: The clock of the TIM15 counter is stopped when the core is halted
// <o0.11> DBG_TIM1_STOP
// <i> TIM1 counter stopped when core is halted
// <i> 0: The clock of the TIM1 counter is fed even if the core is halted
// <i> 1: The clock of the TIM1 counter is stopped when the core is halted
// </h>
DbgMCU_APB2_Fz = 0x00000000;
// </h>
// <<< end of configuration section >>>

View File

@@ -0,0 +1,9 @@
<?xml version="1.0" encoding="utf-8"?>
<component_viewer schemaVersion="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="Component_Viewer.xsd">
<component name="EventRecorderStub" version="1.0.0"/> <!--name and version of the component-->
<events>
</events>
</component_viewer>

View File

@@ -0,0 +1,20 @@
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'TencentOS_tiny'
* Target: 'TencentOS_tiny'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "stm32l4xx.h"
#endif /* RTE_COMPONENTS_H */

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,827 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
<SchemaVersion>2.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>TencentOS_tiny</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
<uAC6>0</uAC6>
<TargetOption>
<TargetCommonOption>
<Device>STM32L431RCTx</Device>
<Vendor>STMicroelectronics</Vendor>
<PackID>Keil.STM32L4xx_DFP.2.0.0</PackID>
<PackURL>http://www.keil.com/pack</PackURL>
<Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x803FFFF) CLOCK(8000000) FPU2 CPUTYPE("Cortex-M4")</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
<FlashDriverDll></FlashDriverDll>
<DeviceId></DeviceId>
<RegisterFile></RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>$$Device:STM32L431RCTx$CMSIS\SVD\STM32L4x1.svd</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
<ButtonStop>0</ButtonStop>
<NotGenerated>0</NotGenerated>
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\obj\</OutputDirectory>
<OutputName>TencentOS_tiny</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>1</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>0</BrowseInformation>
<ListingPath>.\list\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
<CreateBatchFile>0</CreateBatchFile>
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
<nStopU2X>0</nStopU2X>
</BeforeCompile>
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopB1X>0</nStopB1X>
<nStopB2X>0</nStopB2X>
</BeforeMake>
<AfterMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopA1X>0</nStopA1X>
<nStopA2X>0</nStopA2X>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>0</ComprImg>
</CommonProperty>
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments>-REMAP -MPU</SimDllArguments>
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments>-MPU</TargetDllArguments>
<TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
</DllOption>
<DebugOption>
<OPTHX>
<HexSelection>1</HexSelection>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
<Oh166RecLen>16</Oh166RecLen>
</OPTHX>
</DebugOption>
<Utilities>
<Flash1>
<UseTargetDll>1</UseTargetDll>
<UseExternalTool>0</UseExternalTool>
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
<Capability>1</Capability>
<DriverSelection>4107</DriverSelection>
</Flash1>
<bUseTDR>1</bUseTDR>
<Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
<Flash3></Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
<ArmAdsMisc>
<GenerateListings>0</GenerateListings>
<asHll>1</asHll>
<asAsm>1</asAsm>
<asMacX>1</asMacX>
<asSyms>1</asSyms>
<asFals>1</asFals>
<asDbgD>1</asDbgD>
<asForm>1</asForm>
<ldLst>0</ldLst>
<ldmm>1</ldmm>
<ldXref>1</ldXref>
<BigEnd>0</BigEnd>
<AdsALst>1</AdsALst>
<AdsACrf>1</AdsACrf>
<AdsANop>0</AdsANop>
<AdsANot>0</AdsANot>
<AdsLLst>1</AdsLLst>
<AdsLmap>1</AdsLmap>
<AdsLcgr>1</AdsLcgr>
<AdsLsym>1</AdsLsym>
<AdsLszi>1</AdsLszi>
<AdsLtoi>1</AdsLtoi>
<AdsLsun>1</AdsLsun>
<AdsLven>1</AdsLven>
<AdsLsxf>1</AdsLsxf>
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M4"</AdsCpuType>
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
<hadIROM>1</hadIROM>
<hadIRAM>1</hadIRAM>
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>2</RvdsVP>
<RvdsMve>0</RvdsMve>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>1</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<nSecure>0</nSecure>
<RoSelD>3</RoSelD>
<RwSelD>3</RwSelD>
<CodeSel>0</CodeSel>
<OptFeed>0</OptFeed>
<NoZi1>0</NoZi1>
<NoZi2>0</NoZi2>
<NoZi3>0</NoZi3>
<NoZi4>0</NoZi4>
<NoZi5>0</NoZi5>
<Ro1Chk>0</Ro1Chk>
<Ro2Chk>0</Ro2Chk>
<Ro3Chk>0</Ro3Chk>
<Ir1Chk>1</Ir1Chk>
<Ir2Chk>0</Ir2Chk>
<Ra1Chk>0</Ra1Chk>
<Ra2Chk>0</Ra2Chk>
<Ra3Chk>0</Ra3Chk>
<Im1Chk>1</Im1Chk>
<Im2Chk>0</Im2Chk>
<OnChipMemories>
<Ocm1>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm1>
<Ocm2>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm2>
<Ocm3>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm3>
<Ocm4>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm4>
<Ocm5>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm5>
<Ocm6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm6>
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x10000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x8000000</StartAddress>
<Size>0x40000</Size>
</IROM>
<XRAM>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</XRAM>
<OCR_RVCT1>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT1>
<OCR_RVCT2>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT2>
<OCR_RVCT3>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT3>
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x8000000</StartAddress>
<Size>0x40000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT5>
<OCR_RVCT6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT6>
<OCR_RVCT7>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT7>
<OCR_RVCT8>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT8>
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x10000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>1</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>1</OneElfS>
<Strict>0</Strict>
<EnumInt>0</EnumInt>
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>2</wLevel>
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO>
<v6Lang>1</v6Lang>
<v6LangP>1</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
<v6WtE>0</v6WtE>
<v6Rtti>0</v6Rtti>
<VariousControls>
<MiscControls></MiscControls>
<Define>USE_HAL_DRIVER,STM32L431xx,WITH_TOS_NET_ADAPTER,USE_ESP8266</Define>
<Undefine></Undefine>
<IncludePath>..\..\BSP\Inc;..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Inc;..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Legacy;..\..\..\..\platform\vendor_bsp\st\CMSIS\Device\ST\STM32L4xx\Include;..\..\..\..\platform\vendor_bsp\st\CMSIS\Include;..\..\..\..\kernel\core\include;..\..\TOS-CONFIG;..\..\..\..\platform\arch\arm\cortex-m4\keil;..\..\..\..\kernel\pm\include;..\..\..\..\osal\cmsis_os;..\..\..\..\arch\arm\arm-v7m\common\include;..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc;..\..\BSP\Hardware\DHT11;..\..\BSP\Hardware\OLED;..\..\BSP\Hardware\BH1750;..\..\..\..\components\fs\kv\include</IncludePath>
</VariousControls>
</Cads>
<Aads>
<interw>1</interw>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<thumb>0</thumb>
<SplitLS>0</SplitLS>
<SwStkChk>0</SwStkChk>
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<uClangAs>0</uClangAs>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
<umfTarg>1</umfTarg>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<noStLib>0</noStLib>
<RepFail>1</RepFail>
<useFile>0</useFile>
<TextAddressRange>0x08000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange>
<pXoBase></pXoBase>
<ScatterFile></ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
<Groups>
<Group>
<GroupName>Application/MDK-ARM</GroupName>
<Files>
<File>
<FileName>startup_stm32l431xx.s</FileName>
<FileType>2</FileType>
<FilePath>startup_stm32l431xx.s</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Application/User</GroupName>
<Files>
<File>
<FileName>gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\gpio.c</FilePath>
</File>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\main.c</FilePath>
</File>
<File>
<FileName>mcu_init.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\mcu_init.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\stm32l4xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_it.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\stm32l4xx_it.c</FilePath>
</File>
<File>
<FileName>usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\usart.c</FilePath>
</File>
<File>
<FileName>adc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\adc.c</FilePath>
</File>
<File>
<FileName>dac.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\dac.c</FilePath>
</File>
<File>
<FileName>i2c.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\i2c.c</FilePath>
</File>
<File>
<FileName>spi.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\spi.c</FilePath>
</File>
<File>
<FileName>quadspi.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\quadspi.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>examples</GroupName>
<Files>
<File>
<FileName>kv_sample.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\examples\kv\kv_sample.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers/STM32L4xx_HAL_Driver</GroupName>
<Files>
<File>
<FileName>stm32l4xx_hal_tim.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_tim_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_tim_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_uart.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_uart_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_i2c.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_i2c_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_rcc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_rcc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_flash.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_flash_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_flash_ramfunc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_dma.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_dma_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_pwr.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_pwr_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_cortex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_adc_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_adc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_adc.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_dac.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dac.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_dac_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dac_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_spi.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_spi_ex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_spi_ex.c</FilePath>
</File>
<File>
<FileName>stm32l4xx_hal_qspi.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\platform\vendor_bsp\st\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_qspi.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers/CMSIS</GroupName>
<Files>
<File>
<FileName>system_stm32l4xx.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Src\system_stm32l4xx.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Hardware</GroupName>
<Files>
<File>
<FileName>onchip_flash.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Hardware\ONCHIP_FLASH\onchip_flash.c</FilePath>
</File>
<File>
<FileName>hal_qspi_flash.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Hardware\QSPI_FLASH\hal_qspi_flash.c</FilePath>
</File>
<File>
<FileName>DHT11_BUS.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Hardware\DHT11\DHT11_BUS.c</FilePath>
</File>
<File>
<FileName>oled.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Hardware\OLED\oled.c</FilePath>
</File>
<File>
<FileName>qspi_flash_kv.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\BSP\Hardware\QSPI_FLASH\qspi_flash_kv.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>kernel</GroupName>
<Files>
<File>
<FileName>tos_binary_heap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_binary_heap.c</FilePath>
</File>
<File>
<FileName>tos_char_fifo.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_char_fifo.c</FilePath>
</File>
<File>
<FileName>tos_completion.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_completion.c</FilePath>
</File>
<File>
<FileName>tos_countdownlatch.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_countdownlatch.c</FilePath>
</File>
<File>
<FileName>tos_event.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_event.c</FilePath>
</File>
<File>
<FileName>tos_global.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_global.c</FilePath>
</File>
<File>
<FileName>tos_mail_queue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_mail_queue.c</FilePath>
</File>
<File>
<FileName>tos_message_queue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_message_queue.c</FilePath>
</File>
<File>
<FileName>tos_mmblk.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_mmblk.c</FilePath>
</File>
<File>
<FileName>tos_mmheap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_mmheap.c</FilePath>
</File>
<File>
<FileName>tos_mutex.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_mutex.c</FilePath>
</File>
<File>
<FileName>tos_pend.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_pend.c</FilePath>
</File>
<File>
<FileName>tos_priority_mail_queue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_priority_mail_queue.c</FilePath>
</File>
<File>
<FileName>tos_priority_message_queue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_priority_message_queue.c</FilePath>
</File>
<File>
<FileName>tos_priority_queue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_priority_queue.c</FilePath>
</File>
<File>
<FileName>tos_ring_queue.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_ring_queue.c</FilePath>
</File>
<File>
<FileName>tos_robin.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_robin.c</FilePath>
</File>
<File>
<FileName>tos_sched.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_sched.c</FilePath>
</File>
<File>
<FileName>tos_sem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_sem.c</FilePath>
</File>
<File>
<FileName>tos_sys.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_sys.c</FilePath>
</File>
<File>
<FileName>tos_task.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_task.c</FilePath>
</File>
<File>
<FileName>tos_tick.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_tick.c</FilePath>
</File>
<File>
<FileName>tos_time.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_time.c</FilePath>
</File>
<File>
<FileName>tos_timer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\kernel\core\tos_timer.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>cpu</GroupName>
<Files>
<File>
<FileName>port_s.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_s.S</FilePath>
</File>
<File>
<FileName>tos_cpu.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c</FilePath>
</File>
<File>
<FileName>port_c.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_c.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>cmsis</GroupName>
<Files>
<File>
<FileName>cmsis_os.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\osal\cmsis_os\cmsis_os.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>config</GroupName>
<Files>
<File>
<FileName>tos_config.h</FileName>
<FileType>5</FileType>
<FilePath>..\..\TOS-CONFIG\tos_config.h</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>kv</GroupName>
<Files>
<File>
<FileName>tos_kv.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\components\fs\kv\tos_kv.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>::CMSIS</GroupName>
</Group>
</Groups>
</Target>
</Targets>
<RTE>
<apis/>
<components>
<component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
<package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
<targetInfos>
<targetInfo name="TencentOS_tiny"/>
</targetInfos>
</component>
</components>
<files/>
</RTE>
</Project>

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,16 @@
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08000000 0x00040000 { ; load region size_region
ER_IROM1 0x08000000 0x00040000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
.ANY (+XO)
}
RW_IRAM1 0x20000000 0x00010000 { ; RW data
.ANY (+RW +ZI)
}
}

View File

@@ -0,0 +1,404 @@
;********************** COPYRIGHT(c) 2017 STMicroelectronics ******************
;* File Name : startup_stm32l431xx.s
;* Author : MCD Application Team
;* Description : STM32L431xx Ultra Low Power devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the Cortex-M4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;*
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*
;*******************************************************************************
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x100
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x100
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_PVM_IRQHandler ; PVD/PVM1/PVM2/PVM3/PVM4 through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_IRQHandler ; ADC1
DCD CAN1_TX_IRQHandler ; CAN1 TX
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; External Line[15:10]
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SDMMC1_IRQHandler ; SDMMC1
DCD 0 ; Reserved
DCD SPI3_IRQHandler ; SPI3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD COMP_IRQHandler ; COMP Interrupt
DCD LPTIM1_IRQHandler ; LP TIM1 interrupt
DCD LPTIM2_IRQHandler ; LP TIM2 interrupt
DCD 0 ; Reserved
DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6
DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7
DCD LPUART1_IRQHandler ; LP UART1 interrupt
DCD QUADSPI_IRQHandler ; Quad SPI global interrupt
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD SAI1_IRQHandler ; Serial Audio Interface 1 global interrupt
DCD 0 ; Reserved
DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt
DCD TSC_IRQHandler ; Touch Sense Controller global interrupt
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD RNG_IRQHandler ; RNG global interrupt
DCD FPU_IRQHandler ; FPU
DCD CRS_IRQHandler ; CRS interrupt
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_PVM_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SCE_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT SDMMC1_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT TIM6_DAC_IRQHandler [WEAK]
EXPORT TIM7_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_IRQHandler [WEAK]
EXPORT DMA2_Channel5_IRQHandler [WEAK]
EXPORT COMP_IRQHandler [WEAK]
EXPORT LPTIM1_IRQHandler [WEAK]
EXPORT LPTIM2_IRQHandler [WEAK]
EXPORT DMA2_Channel6_IRQHandler [WEAK]
EXPORT DMA2_Channel7_IRQHandler [WEAK]
EXPORT LPUART1_IRQHandler [WEAK]
EXPORT QUADSPI_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT SAI1_IRQHandler [WEAK]
EXPORT SWPMI1_IRQHandler [WEAK]
EXPORT TSC_IRQHandler [WEAK]
EXPORT RNG_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT CRS_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_PVM_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SCE_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM15_IRQHandler
TIM1_UP_TIM16_IRQHandler
TIM1_TRG_COM_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
SDMMC1_IRQHandler
SPI3_IRQHandler
TIM6_DAC_IRQHandler
TIM7_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_IRQHandler
DMA2_Channel5_IRQHandler
COMP_IRQHandler
LPTIM1_IRQHandler
LPTIM2_IRQHandler
DMA2_Channel6_IRQHandler
DMA2_Channel7_IRQHandler
LPUART1_IRQHandler
QUADSPI_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
SAI1_IRQHandler
SWPMI1_IRQHandler
TSC_IRQHandler
RNG_IRQHandler
FPU_IRQHandler
CRS_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****