/************************************************************** Copyright © zuozhongkai Co., Ltd. 1998-2019. All rights reserved. 文件名 : fsl_common.h 作者 : 左忠凯修改NXP官方SDK 版本 : V1.0 描述 : NXP官方SDK的通用关宏定义文档 其他 : NXP官方SDK的通用宏定义文档，默认基于IAR的， 由左忠凯移植到Liux下。 论坛 : www.openedv.com 日志 : 初版V1.0 2019/1/4 左忠凯移植 **************************************************************/ #ifndef _FSL_COMMON_H_ #define _FSL_COMMON_H_ #include "cc.h" /* cc.h为自行添加的文件 */ /*! * @addtogroup ksdk_common * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @brief Construct a status code value from a group and code number. */ #define MAKE_STATUS(group, code) ((((group)*100) + (code))) /*! @brief Construct the version number for drivers. */ #define MAKE_VERSION(major, minor, bugfix) (((major) << 16) | ((minor) << 8) | (bugfix)) /* Debug console type definition. */ #define DEBUG_CONSOLE_DEVICE_TYPE_NONE 0U /*!< No debug console. */ #define DEBUG_CONSOLE_DEVICE_TYPE_UART 1U /*!< Debug console base on UART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_LPUART 2U /*!< Debug console base on LPUART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_LPSCI 3U /*!< Debug console base on LPSCI. */ #define DEBUG_CONSOLE_DEVICE_TYPE_USBCDC 4U /*!< Debug console base on USBCDC. */ #define DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM 5U /*!< Debug console base on USBCDC. */ #define DEBUG_CONSOLE_DEVICE_TYPE_IUART 6U /*!< Debug console base on i.MX UART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_VUSART 7U /*!< Debug console base on LPC_USART. */ /*! @brief Status group numbers. */ enum _status_groups { kStatusGroup_Generic = 0, /*!< Group number for generic status codes. */ kStatusGroup_FLASH = 1, /*!< Group number for FLASH status codes. */ kStatusGroup_LPSPI = 4, /*!< Group number for LPSPI status codes. */ kStatusGroup_FLEXIO_SPI = 5, /*!< Group number for FLEXIO SPI status codes. */ kStatusGroup_DSPI = 6, /*!< Group number for DSPI status codes. */ kStatusGroup_FLEXIO_UART = 7, /*!< Group number for FLEXIO UART status codes. */ kStatusGroup_FLEXIO_I2C = 8, /*!< Group number for FLEXIO I2C status codes. */ kStatusGroup_LPI2C = 9, /*!< Group number for LPI2C status codes. */ kStatusGroup_UART = 10, /*!< Group number for UART status codes. */ kStatusGroup_I2C = 11, /*!< Group number for UART status codes. */ kStatusGroup_LPSCI = 12, /*!< Group number for LPSCI status codes. */ kStatusGroup_LPUART = 13, /*!< Group number for LPUART status codes. */ kStatusGroup_SPI = 14, /*!< Group number for SPI status code.*/ kStatusGroup_XRDC = 15, /*!< Group number for XRDC status code.*/ kStatusGroup_SEMA42 = 16, /*!< Group number for SEMA42 status code.*/ kStatusGroup_SDHC = 17, /*!< Group number for SDHC status code */ kStatusGroup_SDMMC = 18, /*!< Group number for SDMMC status code */ kStatusGroup_SAI = 19, /*!< Group number for SAI status code */ kStatusGroup_MCG = 20, /*!< Group number for MCG status codes. */ kStatusGroup_SCG = 21, /*!< Group number for SCG status codes. */ kStatusGroup_SDSPI = 22, /*!< Group number for SDSPI status codes. */ kStatusGroup_FLEXIO_I2S = 23, /*!< Group number for FLEXIO I2S status codes */ kStatusGroup_FLEXIO_MCULCD = 24, /*!< Group number for FLEXIO LCD status codes */ kStatusGroup_FLASHIAP = 25, /*!< Group number for FLASHIAP status codes */ kStatusGroup_FLEXCOMM_I2C = 26, /*!< Group number for FLEXCOMM I2C status codes */ kStatusGroup_I2S = 27, /*!< Group number for I2S status codes */ kStatusGroup_IUART = 28, /*!< Group number for IUART status codes */ kStatusGroup_CSI = 29, /*!< Group number for CSI status codes */ kStatusGroup_SDRAMC = 35, /*!< Group number for SDRAMC status codes. */ kStatusGroup_POWER = 39, /*!< Group number for POWER status codes. */ kStatusGroup_ENET = 40, /*!< Group number for ENET status codes. */ kStatusGroup_PHY = 41, /*!< Group number for PHY status codes. */ kStatusGroup_TRGMUX = 42, /*!< Group number for TRGMUX status codes. */ kStatusGroup_SMARTCARD = 43, /*!< Group number for SMARTCARD status codes. */ kStatusGroup_LMEM = 44, /*!< Group number for LMEM status codes. */ kStatusGroup_QSPI = 45, /*!< Group number for QSPI status codes. */ kStatusGroup_DMA = 50, /*!< Group number for DMA status codes. */ kStatusGroup_EDMA = 51, /*!< Group number for EDMA status codes. */ kStatusGroup_DMAMGR = 52, /*!< Group number for DMAMGR status codes. */ kStatusGroup_FLEXCAN = 53, /*!< Group number for FlexCAN status codes. */ kStatusGroup_LTC = 54, /*!< Group number for LTC status codes. */ kStatusGroup_FLEXIO_CAMERA = 55, /*!< Group number for FLEXIO CAMERA status codes. */ kStatusGroup_LPC_SPI = 56, /*!< Group number for LPC_SPI status codes. */ kStatusGroup_LPC_USART = 57, /*!< Group number for LPC_USART status codes. */ kStatusGroup_DMIC = 58, /*!< Group number for DMIC status codes. */ kStatusGroup_SDIF = 59, /*!< Group number for SDIF status codes.*/ kStatusGroup_SPIFI = 60, /*!< Group number for SPIFI status codes. */ kStatusGroup_OTP = 61, /*!< Group number for OTP status codes. */ kStatusGroup_MCAN = 62, /*!< Group number for MCAN status codes. */ kStatusGroup_CAAM = 63, /*!< Group number for CAAM status codes. */ kStatusGroup_ECSPI = 64, /*!< Group number for ECSPI status codes. */ kStatusGroup_USDHC = 65, /*!< Group number for USDHC status codes.*/ kStatusGroup_LPC_I2C = 66, /*!< Group number for LPC_I2C status codes.*/ kStatusGroup_ESAI = 69, /*!< Group number for ESAI status codes. */ kStatusGroup_FLEXSPI = 70, /*!< Group number for FLEXSPI status codes. */ kStatusGroup_MMDC = 71, /*!< Group number for MMDC status codes. */ kStatusGroup_MICFIL = 72, /*!< Group number for MIC status codes. */ kStatusGroup_SDMA = 73, /*!< Group number for SDMA status codes. */ kStatusGroup_NOTIFIER = 98, /*!< Group number for NOTIFIER status codes. */ kStatusGroup_DebugConsole = 99, /*!< Group number for debug console status codes. */ kStatusGroup_ApplicationRangeStart = 100, /*!< Starting number for application groups. */ }; /*! @brief Generic status return codes. */ enum _generic_status { kStatus_Success = MAKE_STATUS(kStatusGroup_Generic, 0), kStatus_Fail = MAKE_STATUS(kStatusGroup_Generic, 1), kStatus_ReadOnly = MAKE_STATUS(kStatusGroup_Generic, 2), kStatus_OutOfRange = MAKE_STATUS(kStatusGroup_Generic, 3), kStatus_InvalidArgument = MAKE_STATUS(kStatusGroup_Generic, 4), kStatus_Timeout = MAKE_STATUS(kStatusGroup_Generic, 5), kStatus_NoTransferInProgress = MAKE_STATUS(kStatusGroup_Generic, 6), }; /*! @brief Type used for all status and error return values. */ typedef int32_t status_t; #endif /* _FSL_COMMON_H_ */