375 lines
10 KiB
C
375 lines
10 KiB
C
/**
|
|
******************************************************************************
|
|
* File Name : USART.c
|
|
* Description : This file provides code for the configuration
|
|
* of the USART instances.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "usart.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
uint8_t data2;
|
|
uint8_t data3;
|
|
uint8_t data4;
|
|
uint8_t datal1;
|
|
/* USER CODE END 0 */
|
|
|
|
UART_HandleTypeDef huart1;
|
|
UART_HandleTypeDef huart2;
|
|
UART_HandleTypeDef huart3;
|
|
UART_HandleTypeDef huart4;
|
|
UART_HandleTypeDef hlpuart1;
|
|
|
|
/* USART1 init function */
|
|
|
|
void MX_USART1_UART_Init(void)
|
|
{
|
|
|
|
huart1.Instance = USART1;
|
|
huart1.Init.BaudRate = 115200;
|
|
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart1.Init.StopBits = UART_STOPBITS_1;
|
|
huart1.Init.Parity = UART_PARITY_NONE;
|
|
huart1.Init.Mode = UART_MODE_TX_RX;
|
|
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
|
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
if (HAL_UART_Init(&huart1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
}
|
|
/* USART2 init function */
|
|
|
|
void MX_USART2_UART_Init(void)
|
|
{
|
|
|
|
huart2.Instance = USART2;
|
|
huart2.Init.BaudRate = 57600;
|
|
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart2.Init.StopBits = UART_STOPBITS_1;
|
|
huart2.Init.Parity = UART_PARITY_NONE;
|
|
huart2.Init.Mode = UART_MODE_TX_RX;
|
|
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
|
huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
if (HAL_UART_Init(&huart2) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
HAL_UART_Receive_IT(&huart2, &data2, 1);
|
|
|
|
}
|
|
/* USART3 init function */
|
|
|
|
void MX_USART3_UART_Init(void)
|
|
{
|
|
|
|
huart3.Instance = USART3;
|
|
huart3.Init.BaudRate = 9600;
|
|
huart3.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart3.Init.StopBits = UART_STOPBITS_1;
|
|
huart3.Init.Parity = UART_PARITY_NONE;
|
|
huart3.Init.Mode = UART_MODE_TX_RX;
|
|
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
|
huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
if (HAL_UART_Init(&huart3) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
HAL_UART_Receive_IT(&huart3, &data3, 1);
|
|
}
|
|
|
|
/* UART4 init function */
|
|
void MX_UART4_Init(void)
|
|
{
|
|
|
|
huart4.Instance = UART4;
|
|
huart4.Init.BaudRate = 115200;
|
|
huart4.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart4.Init.StopBits = UART_STOPBITS_1;
|
|
huart4.Init.Parity = UART_PARITY_NONE;
|
|
huart4.Init.Mode = UART_MODE_TX_RX;
|
|
huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart4.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
huart4.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
|
huart4.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
if (HAL_UART_Init(&huart4) != HAL_OK)
|
|
{
|
|
_Error_Handler(__FILE__, __LINE__);
|
|
}
|
|
HAL_UART_Receive_IT(&huart4, &data4, 1);
|
|
}
|
|
|
|
/* LPUART1 init function */
|
|
void MX_LPUART1_UART_Init(void)
|
|
{
|
|
|
|
hlpuart1.Instance = LPUART1;
|
|
hlpuart1.Init.BaudRate = 209700;
|
|
hlpuart1.Init.WordLength = UART_WORDLENGTH_7B;
|
|
hlpuart1.Init.StopBits = UART_STOPBITS_1;
|
|
hlpuart1.Init.Parity = UART_PARITY_NONE;
|
|
hlpuart1.Init.Mode = UART_MODE_TX_RX;
|
|
hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
|
hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
|
if (HAL_UART_Init(&hlpuart1) != HAL_OK)
|
|
{
|
|
_Error_Handler(__FILE__, __LINE__);
|
|
}
|
|
HAL_UART_Receive_IT(&hlpuart1, &datal1, 1);
|
|
}
|
|
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(huart->Instance==LPUART1)
|
|
{
|
|
/* USER CODE BEGIN LPUART1_MspInit 0 */
|
|
|
|
/* USER CODE END LPUART1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_LPUART1_CLK_ENABLE();
|
|
|
|
/**LPUART1 GPIO Configuration
|
|
PB10 ------> LPUART1_RX
|
|
PB11 ------> LPUART1_TX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN LPUART1_MspInit 1 */
|
|
|
|
/* USER CODE END LPUART1_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==UART4)
|
|
{
|
|
/* USER CODE BEGIN UART4_MspInit 0 */
|
|
|
|
/* USER CODE END UART4_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_UART4_CLK_ENABLE();
|
|
|
|
/**UART4 GPIO Configuration
|
|
PA0 ------> UART4_TX
|
|
PA1 ------> UART4_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN UART4_MspInit 1 */
|
|
|
|
/* USER CODE END UART4_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
|
|
|
/* USER CODE END USART1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
|
|
/**USART1 GPIO Configuration
|
|
PB6 ------> USART1_TX
|
|
PB7 ------> USART1_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
|
|
|
/* USER CODE END USART1_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
|
|
/* USER CODE END USART2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART2_CLK_ENABLE();
|
|
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USART2 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
|
|
/* USER CODE END USART2_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PC4 ------> USART3_TX
|
|
PC5 ------> USART3_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/* USART3 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
|
|
/* USER CODE END USART3_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
{
|
|
|
|
if(huart->Instance==LPUART1)
|
|
{
|
|
/* USER CODE BEGIN LPUART1_MspDeInit 0 */
|
|
|
|
/* USER CODE END LPUART1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_LPUART1_CLK_DISABLE();
|
|
|
|
/**LPUART1 GPIO Configuration
|
|
PB10 ------> LPUART1_RX
|
|
PB11 ------> LPUART1_TX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
|
|
|
|
/* USER CODE BEGIN LPUART1_MspDeInit 1 */
|
|
|
|
/* USER CODE END LPUART1_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==UART4)
|
|
{
|
|
/* USER CODE BEGIN UART4_MspDeInit 0 */
|
|
|
|
/* USER CODE END UART4_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_UART4_CLK_DISABLE();
|
|
|
|
/**UART4 GPIO Configuration
|
|
PA0 ------> UART4_TX
|
|
PA1 ------> UART4_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1);
|
|
|
|
/* USER CODE BEGIN UART4_MspDeInit 1 */
|
|
|
|
/* USER CODE END UART4_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
|
|
/**USART1 GPIO Configuration
|
|
PB6 ------> USART1_TX
|
|
PB7 ------> USART1_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
|
|
|
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART2_CLK_DISABLE();
|
|
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
|
|
|
/* USART2 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PC4 ------> USART3_TX
|
|
PC5 ------> USART3_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5);
|
|
|
|
/* USART3 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|