串口工具 - kermit

安装

linux

  wget http://www.kermitproject.org/ftp/kermit/test/tar/x.zip
  unzip x.zip -d c-kermit && cd c-kermit
  make linux
  make DESTDIR=$HOME/.usr/kermit BINDIR=$DESTDIR MANDIR=$DESTDIR install

然后导出环境变量

  KERMIT=$HOME/.usr/kermit
  export PATH=${KERMIT}:${PATH}

使用

配置串口

  sudo stty -F /dev/ttyUSB0 ispeed 115200 ospeed 115200 cs8

打开 ~/.kermrc, 配置 kermit 启动参数

  set line /dev/ttyUSB0
  set speed 115200
  set carrier-watch off
  connect

执行 sudo -E env "PATH=$PATH" kermit 启动串口工具, 出现如下输出表示连接成功

  Connecting to /dev/ttyUSB0, speed 115200
   Escape character: Ctrl-\ (ASCII 28, FS): enabled
  Type the escape character followed by C to get back,
  or followed by ? to see other options.
  ----------------------------------------------------

如果想回到 kermit, 按下 Ctrl-, 再按下 C 即可, 如果想再连接到串口, 输入 c 即可.

1.1 KiB Raw Blame History

串口工具 - kermit

1.1 KiB

Raw Blame History