157 lines
6.3 KiB
C
157 lines
6.3 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
#include "clock_config.h"
|
|
#include "fsl_gpio.h"
|
|
#include "fsl_debug_console.h"
|
|
#include "fsl_common.h"
|
|
#include "fsl_device_registers.h"
|
|
#include "pin_mux.h"
|
|
#include "Board_LED.h"
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/* The board name */
|
|
#define BOARD_NAME "FRDM-KL25Z"
|
|
|
|
/* The LPSCI to use for debug messages. */
|
|
#define BOARD_DEBUG_UART_TYPE DEBUG_CONSOLE_DEVICE_TYPE_LPSCI
|
|
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) UART0
|
|
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_PllFllSelClk
|
|
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetPllFllSelClkFreq()
|
|
#define BOARD_UART_IRQ UART0_IRQn
|
|
#define BOARD_UART_IRQ_HANDLER UART0_IRQHandler
|
|
|
|
#ifndef BOARD_DEBUG_UART_BAUDRATE
|
|
#define BOARD_DEBUG_UART_BAUDRATE 115200
|
|
#endif /* BOARD_DEBUG_UART_BAUDRATE */
|
|
|
|
/* Define the port interrupt number for the board switches */
|
|
#define BOARD_SW1_GPIO GPIOA
|
|
#define BOARD_SW1_PORT PORTA
|
|
#define BOARD_SW1_GPIO_PIN 20U
|
|
#define BOARD_SW1_IRQ PORTA_IRQn
|
|
#define BOARD_SW1_IRQ_HANDLER PORTA_IRQHandler
|
|
#define BOARD_SW1_NAME "SW1"
|
|
|
|
/* Switch simulated by wire */
|
|
#define BOARD_SW2_GPIO GPIOA
|
|
#define BOARD_SW2_PORT PORTA
|
|
#define BOARD_SW2_GPIO_PIN 17U
|
|
#define BOARD_SW2_IRQ PORTA_IRQn
|
|
#define BOARD_SW2_IRQ_HANDLER PORTA_IRQHandler
|
|
#define BOARD_SW2_NAME "SW2"
|
|
|
|
/*! @brief Indexes of the TSI channels for on board electrodes */
|
|
#define BOARD_TSI_ELECTRODE_1 9U
|
|
#define BOARD_TSI_ELECTRODE_2 10U
|
|
|
|
/* Board led color mapping */
|
|
#define LOGIC_LED_ON 0U
|
|
#define LOGIC_LED_OFF 1U
|
|
#define BOARD_LED_RED_GPIO GPIOB
|
|
#define BOARD_LED_RED_GPIO_PORT PORTB
|
|
#define BOARD_LED_RED_GPIO_PIN 18U
|
|
#define BOARD_LED_GREEN_GPIO GPIOB
|
|
#define BOARD_LED_GREEN_GPIO_PORT PORTB
|
|
#define BOARD_LED_GREEN_GPIO_PIN 19U
|
|
#define BOARD_LED_BLUE_GPIO GPIOD
|
|
#define BOARD_LED_BLUE_GPIO_PORT PORTD
|
|
#define BOARD_LED_BLUE_GPIO_PIN 1U
|
|
|
|
#define LED_RED_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, output); \
|
|
BOARD_LED_RED_GPIO->PDDR |= (1U << BOARD_LED_RED_GPIO_PIN) /*!< Enable target LED_RED */
|
|
#define LED_RED_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED */
|
|
#define LED_RED_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED_RED */
|
|
#define LED_RED_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */
|
|
|
|
#define LED_GREEN_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
|
|
BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
|
|
#define LED_GREEN_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
|
|
#define LED_GREEN_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
|
|
#define LED_GREEN_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */
|
|
|
|
#define LED_BLUE_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PIN, output); \
|
|
BOARD_LED_BLUE_GPIO->PDDR |= (1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Enable target LED_BLUE */
|
|
#define LED_BLUE_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE */
|
|
#define LED_BLUE_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE */
|
|
#define LED_BLUE_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
|
|
|
|
#define BOARD_ACCEL_I2C_BASEADDR I2C0
|
|
|
|
/* ERPC SPI configuration */
|
|
#define ERPC_BOARD_SPI_BASEADDR SPI0
|
|
#define ERPC_BOARD_SPI_BAUDRATE 500000U
|
|
#define ERPC_BOARD_SPI_CLKSRC SPI0_CLK_SRC
|
|
#define ERPC_BOARD_SPI_CLK_FREQ CLOCK_GetFreq(SPI0_CLK_SRC)
|
|
#define ERPC_BOARD_SPI_INT_GPIO GPIOD
|
|
#define ERPC_BOARD_SPI_INT_PORT PORTD
|
|
#define ERPC_BOARD_SPI_INT_PIN 0U
|
|
#define ERPC_BOARD_SPI_INT_PIN_IRQ PORTD_IRQn
|
|
#define ERPC_BOARD_SPI_INT_PIN_IRQ_HANDLER PORTD_IRQHandler
|
|
|
|
/* DAC base address */
|
|
#define BOARD_DAC_BASEADDR DAC0
|
|
|
|
/* Board accelerometer driver */
|
|
#define BOARD_ACCEL_MMA
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif /* __cplusplus */
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
void BOARD_InitDebugConsole(void);
|
|
void board_init(void);
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif /* __cplusplus */
|
|
|
|
#endif /* _BOARD_H_ */
|