fix all board compile for v3.0

2021-08-11 16:30:15 +08:00
parent 1f694e2156
commit 8253a953bd
615 changed files with 96466 additions and 80894 deletions
--- a/board/TencentOS_Tiny_EVB_STM32WL/BSP/Src/usart.c
+++ b/board/TencentOS_Tiny_EVB_STM32WL/BSP/Src/usart.c
@@ -0,0 +1,138 @@
+/**
+  ******************************************************************************
+  * @file    usart.c
+  * @author  MCD Application Team
+  * @brief   configuration of the USART instances
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "usart.h"
+
+#include "stdio.h"
+/* External variables --------------------------------------------------------*/
+/* Private typedef -----------------------------------------------------------*/
+
+uint8_t msg;
+
+UART_HandleTypeDef huart1;
+UART_HandleTypeDef huart2;
+
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Functions Definition ------------------------------------------------------*/
+
+void MX_USART1_UART_Init(void)
+{
+  huart1.Instance        = USART1;
+  huart1.Init.BaudRate   = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits   = UART_STOPBITS_1;
+  huart1.Init.Parity     = UART_PARITY_NONE;
+  huart1.Init.Mode       = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+
+  if(HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+void MX_USART2_UART_Init(void)
+{
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = 9600;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+  huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+  huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+
+  if (HAL_UART_Init(&huart2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+   HAL_UART_Receive_IT(&huart2, &msg, 1);
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
+{
+	GPIO_InitTypeDef GPIO_InitStruct = {0};
+	RCC_PeriphCLKInitTypeDef  PeriphClkInit = {0};
+    
+    if(uartHandle->Instance==USART2)
+    {
+        /* USER CODE BEGIN USART2_MspInit 0 */
+
+        /* USER CODE END USART2_MspInit 0 */
+        /* USART2 clock enable */
+        __HAL_RCC_USART2_CLK_ENABLE();
+
+        __HAL_RCC_GPIOA_CLK_ENABLE();
+        /**USART2 GPIO Configuration
+        PA2     ------> USART2_TX
+        PA3     ------> USART2_RX
+        */
+        GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        /* USART2 interrupt Init */
+        HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
+        HAL_NVIC_EnableIRQ(USART2_IRQn);
+        /* USER CODE BEGIN USART2_MspInit 1 */
+
+        /* USER CODE END USART2_MspInit 1 */
+    }
+    else if(uartHandle->Instance==USART1)
+    {
+        /* Enable GPIO TX/RX clock */
+        USARTx_TX_GPIO_CLK_ENABLE();
+        USARTx_RX_GPIO_CLK_ENABLE();
+
+        USARTx_CLK_ENABLE();
+
+        GPIO_InitStruct.Pin = USARTx_TX_Pin;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_PULLUP;
+        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+        GPIO_InitStruct.Alternate = USARTx_TX_AF;
+        HAL_GPIO_Init(USARTx_TX_GPIO_Port, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = USARTx_RX_Pin;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+        GPIO_InitStruct.Alternate = USARTx_RX_AF;
+        HAL_GPIO_Init(USARTx_RX_GPIO_Port, &GPIO_InitStruct);
+        
+        /* USART1 interrupt Init */
+        HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);
+        HAL_NVIC_EnableIRQ(USART1_IRQn);        
+        
+    }
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/