NUCLEO_STM32F401RE

Signed-off-by: squallbest <squall@live0415.com>
2019-10-12 14:58:40 +08:00
parent 575a62b72b
commit b4c4b81f9f
14 changed files with 3866 additions and 0 deletions
--- a/board/NUCLEO_STM32F401RE/BSP/Inc/stm32f4xx_hal_conf.h
+++ b/board/NUCLEO_STM32F401RE/BSP/Inc/stm32f4xx_hal_conf.h
@@ -0,0 +1,439 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+
+  /* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_CAN_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_DCMI_MODULE_ENABLED   */
+/* #define HAL_DMA2D_MODULE_ENABLED   */
+/* #define HAL_ETH_MODULE_ENABLED   */
+/* #define HAL_NAND_MODULE_ENABLED   */
+/* #define HAL_NOR_MODULE_ENABLED   */
+/* #define HAL_PCCARD_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED   */
+/* #define HAL_SDRAM_MODULE_ENABLED   */
+/* #define HAL_HASH_MODULE_ENABLED   */
+/* #define HAL_I2C_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_LTDC_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SAI_MODULE_ENABLED   */
+/* #define HAL_SD_MODULE_ENABLED   */
+/* #define HAL_MMC_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_DSI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED   */
+/* #define HAL_DFSDM_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+/* #define HAL_EXTI_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE		      ((uint32_t)3300U) /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */            
+#define  USE_RTOS                     0U     
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/ 
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+  
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */      
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */    
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Inc/stm32f4xx_it.h
+++ b/board/NUCLEO_STM32F401RE/BSP/Inc/stm32f4xx_it.h
@@ -0,0 +1,69 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Inc/usart.h
+++ b/board/NUCLEO_STM32F401RE/BSP/Inc/usart.h
@@ -0,0 +1,58 @@
+/**
+  ******************************************************************************
+  * File Name          : USART.h
+  * Description        : This file provides code for the configuration
+  *                      of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __usart_H
+#define __usart_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern UART_HandleTypeDef huart2;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_USART2_UART_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ usart_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Src/gpio.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/gpio.c
@@ -0,0 +1,65 @@
+/**
+  ******************************************************************************
+  * File Name          : gpio.c
+  * Description        : This file provides code for the configuration
+  *                      of all used GPIO pins.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO                                                             */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as 
+        * Analog 
+        * Input 
+        * Output
+        * EVENT_OUT
+        * EXTI
+*/
+void MX_GPIO_Init(void)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = LED_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Src/main.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/main.c
@@ -0,0 +1,23 @@
+#include "mcu_init.h"
+#include "cmsis_os.h"
+
+#define APPLICATION_TASK_STK_SIZE       1024
+extern void application_entry(void *arg);
+osThreadDef(application_entry, osPriorityNormal, 1, APPLICATION_TASK_STK_SIZE);
+
+__weak void application_entry(void *arg)
+{
+    while (1) {
+        printf("This is a demo task,please use your task entry!\r\n");
+        tos_task_delay(1000);
+    }
+}
+
+int main(void)
+{
+    board_init();
+    printf("Welcome to TencentOS tiny\r\n");
+    osKernelInitialize();
+    osThreadCreate(osThread(application_entry), NULL);
+    osKernelStart();
+}
--- a/board/NUCLEO_STM32F401RE/BSP/Src/mcu_init.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/mcu_init.c
@@ -0,0 +1,115 @@
+#include "mcu_init.h"
+
+int fputc(int ch, FILE *f)
+{
+  if (ch == '\n') {
+    HAL_UART_Transmit(&huart2, (void *)"\r", 1,30000);
+  }
+  HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, 0xFFFF);
+  return ch;
+}
+
+int _write(int fd, char *ptr, int len)
+{
+    (void)HAL_UART_Transmit(&huart2, (uint8_t *)ptr, len, 0xFFFF);
+    return len;
+}
+
+int fgetc(FILE *f)
+{
+  /* Place your implementation of fgetc here */
+  /* e.g. readwrite a character to the USART2 and Loop until the end of transmission */
+  uint8_t ch = 0;
+  //uint32_t recv_size;
+  HAL_UART_Receive(&huart2, &ch, 1,30000);
+  return ch;
+}
+
+
+void board_init(void)
+{
+
+  HAL_Init();
+  SystemClock_Config();
+  MX_GPIO_Init();
+  MX_USART2_UART_Init();
+
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage 
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLM = 8;
+  RCC_OscInitStruct.PLL.PLLN = 84;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 4;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Src/stm32f4xx_hal_msp.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/stm32f4xx_hal_msp.c
@@ -0,0 +1,84 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32f4xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization 
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Src/stm32f4xx_it.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/stm32f4xx_it.c
@@ -0,0 +1,210 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f4xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+#include "tos.h"
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+__weak void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+	if(tos_knl_is_running())
+  {
+      tos_knl_irq_enter();
+      tos_tick_handler();             
+      tos_knl_irq_leave();
+  }
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f4xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Src/system_stm32f4xx.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/system_stm32f4xx.c
@@ -0,0 +1,761 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+          STM32F412Zx || STM32F412Vx */
+ 
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x24003010;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+  
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x00000073;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+  (void)(tmp); 
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else  
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else    
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */ 
+  (void)(tmp); 
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/BSP/Src/usart.c
+++ b/board/NUCLEO_STM32F401RE/BSP/Src/usart.c
@@ -0,0 +1,106 @@
+/**
+  ******************************************************************************
+  * File Name          : USART.c
+  * Description        : This file provides code for the configuration
+  *                      of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usart.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+UART_HandleTypeDef huart2;
+
+/* USART2 init function */
+
+void MX_USART2_UART_Init(void)
+{
+
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = 115200;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(uartHandle->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspInit 0 */
+
+  /* USER CODE END USART2_MspInit 0 */
+    /* USART2 clock enable */
+    __HAL_RCC_USART2_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART2 GPIO Configuration    
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART2_MspInit 1 */
+
+  /* USER CODE END USART2_MspInit 1 */
+  }
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
+{
+
+  if(uartHandle->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+  /* USER CODE END USART2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART2_CLK_DISABLE();
+  
+    /**USART2 GPIO Configuration    
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX 
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
+
+  /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+  /* USER CODE END USART2_MspDeInit 1 */
+  }
+} 
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/board/NUCLEO_STM32F401RE/KEIL/hello_world/NUCLEO_STM32F401RE.uvoptx
+++ b/board/NUCLEO_STM32F401RE/KEIL/hello_world/NUCLEO_STM32F401RE.uvoptx
@@ -0,0 +1,828 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>NUCLEO_STM32F401RE</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>84000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath></ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>1</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGTARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name></Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGUARM</Key>
+          <Name>(105=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512 -FS08000000 -FL080000 -FP0($$Device:STM32F401RETx$CMSIS\Flash\STM32F4xx_512.FLM))</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U-O142 -O2254 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F401RETx$CMSIS\Flash\STM32F4xx_512.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>1</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Application/MDK-ARM</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>startup_stm32f401xe.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f401xe.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Application/User</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\gpio.c</PathWithFileName>
+      <FilenameWithoutPath>gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\main.c</PathWithFileName>
+      <FilenameWithoutPath>main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\stm32f4xx_hal_msp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_msp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>5</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\stm32f4xx_it.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_it.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>6</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\usart.c</PathWithFileName>
+      <FilenameWithoutPath>usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>7</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\mcu_init.c</PathWithFileName>
+      <FilenameWithoutPath>mcu_init.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Drivers/STM32F4xx_HAL_Driver</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>8</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>9</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_dma.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>10</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_dma_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>11</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_exti.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>12</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_flash.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>13</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_flash_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>14</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_flash_ramfunc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>15</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>16</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_pwr.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>17</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_pwr_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>18</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rcc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>19</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rcc_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>20</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_tim.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>21</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_tim_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>22</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_uart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>23</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cortex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Drivers/CMSIS</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>24</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\BSP\Src\system_stm32f4xx.c</PathWithFileName>
+      <FilenameWithoutPath>system_stm32f4xx.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>tos/arch</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>25</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c</PathWithFileName>
+      <FilenameWithoutPath>tos_cpu.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>26</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_c.c</PathWithFileName>
+      <FilenameWithoutPath>port_c.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>27</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_s.S</PathWithFileName>
+      <FilenameWithoutPath>port_s.S</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>tos/kernel</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>28</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_event.c</PathWithFileName>
+      <FilenameWithoutPath>tos_event.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>29</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_fifo.c</PathWithFileName>
+      <FilenameWithoutPath>tos_fifo.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>30</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_global.c</PathWithFileName>
+      <FilenameWithoutPath>tos_global.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>31</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_mmblk.c</PathWithFileName>
+      <FilenameWithoutPath>tos_mmblk.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>32</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_mmheap.c</PathWithFileName>
+      <FilenameWithoutPath>tos_mmheap.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>33</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_msg.c</PathWithFileName>
+      <FilenameWithoutPath>tos_msg.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>34</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_mutex.c</PathWithFileName>
+      <FilenameWithoutPath>tos_mutex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>35</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_pend.c</PathWithFileName>
+      <FilenameWithoutPath>tos_pend.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>36</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_queue.c</PathWithFileName>
+      <FilenameWithoutPath>tos_queue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>37</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_robin.c</PathWithFileName>
+      <FilenameWithoutPath>tos_robin.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>38</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_sched.c</PathWithFileName>
+      <FilenameWithoutPath>tos_sched.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>39</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_sem.c</PathWithFileName>
+      <FilenameWithoutPath>tos_sem.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>40</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_sys.c</PathWithFileName>
+      <FilenameWithoutPath>tos_sys.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>41</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_task.c</PathWithFileName>
+      <FilenameWithoutPath>tos_task.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>42</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_tick.c</PathWithFileName>
+      <FilenameWithoutPath>tos_tick.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>43</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_time.c</PathWithFileName>
+      <FilenameWithoutPath>tos_time.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>44</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\kernel\core\tos_timer.c</PathWithFileName>
+      <FilenameWithoutPath>tos_timer.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>tos/cmsis_os</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>45</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\osal\cmsis_os\cmsis_os.c</PathWithFileName>
+      <FilenameWithoutPath>cmsis_os.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>examples</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>46</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\..\examples\hello_world\hello_world.c</PathWithFileName>
+      <FilenameWithoutPath>hello_world.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>
--- a/board/NUCLEO_STM32F401RE/KEIL/hello_world/NUCLEO_STM32F401RE.uvprojx
+++ b/board/NUCLEO_STM32F401RE/KEIL/hello_world/NUCLEO_STM32F401RE.uvprojx
@@ -0,0 +1,672 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>NUCLEO_STM32F401RE</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F401RETx</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000-0x20017FFF) IROM(0x8000000-0x807FFFF) CLOCK(25000000) FPU2 CPUTYPE("Cortex-M4")</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId></DeviceId>
+          <RegisterFile></RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F401RETx$CMSIS\SVD\STM32F401xE.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>NUCLEO_STM32F401RE\</OutputDirectory>
+          <OutputName>NUCLEO_STM32F401RE</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath></ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>0</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4107</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x18000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x18000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>USE_HAL_DRIVER,STM32F401xE,USE_HAL_DRIVER,STM32F401xE</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\..\BSP\Inc;..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Inc;..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Inc\Legacy;..\..\..\..\platform\vendor_bsp\st\CMSIS\Device\ST\STM32F4xx\Include;..\..\..\..\platform\vendor_bsp\st\CMSIS\Include;..\..\..\..\arch\arm\arm-v7m\common\include;..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc;..\..\..\..\kernel\core\include;..\..\..\..\kernel\pm\include;..\..\..\..\osal\cmsis_os;..\..\TOS_CONFIG</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Application/MDK-ARM</GroupName>
+          <Files>
+            <File>
+              <FileName>startup_stm32f401xe.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>startup_stm32f401xe.s</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Application/User</GroupName>
+          <Files>
+            <File>
+              <FileName>gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\main.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\stm32f4xx_hal_msp.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_it.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\stm32f4xx_it.c</FilePath>
+            </File>
+            <File>
+              <FileName>usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>mcu_init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\mcu_init.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers/STM32F4xx_HAL_Driver</GroupName>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_dma_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_exti.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_flash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_flash_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_flash_ramfunc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_tim_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cortex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\platform\vendor_bsp\st\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers/CMSIS</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f4xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\BSP\Src\system_stm32f4xx.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>tos/arch</GroupName>
+          <Files>
+            <File>
+              <FileName>tos_cpu.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\arch\arm\arm-v7m\common\tos_cpu.c</FilePath>
+            </File>
+            <File>
+              <FileName>port_c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_c.c</FilePath>
+            </File>
+            <File>
+              <FileName>port_s.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\arch\arm\arm-v7m\cortex-m4\armcc\port_s.S</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>tos/kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>tos_event.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_event.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_fifo.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_fifo.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_global.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_global.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_mmblk.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_mmblk.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_mmheap.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_mmheap.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_msg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_msg.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_mutex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_mutex.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_pend.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_pend.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_queue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_queue.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_robin.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_robin.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_sched.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_sched.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_sem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_sem.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_sys.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_sys.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_task.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_task.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_tick.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_tick.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_time.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_time.c</FilePath>
+            </File>
+            <File>
+              <FileName>tos_timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\kernel\core\tos_timer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>tos/cmsis_os</GroupName>
+          <Files>
+            <File>
+              <FileName>cmsis_os.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\osal\cmsis_os\cmsis_os.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>examples</GroupName>
+          <Files>
+            <File>
+              <FileName>hello_world.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\examples\hello_world\hello_world.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>::CMSIS</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
+        <targetInfos>
+          <targetInfo name="NUCLEO_STM32F401RE"/>
+        </targetInfos>
+      </component>
+    </components>
+    <files/>
+  </RTE>
+
+</Project>
--- a/board/NUCLEO_STM32F401RE/KEIL/hello_world/startup_stm32f401xe.s
+++ b/board/NUCLEO_STM32F401RE/KEIL/hello_world/startup_stm32f401xe.s
@@ -0,0 +1,390 @@
+;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
+;* File Name          : startup_stm32f401xe.s
+;* Author             : MCD Application Team
+;* Description        : STM32F401xe devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM4 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size		EQU     0x400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size      EQU     0x200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+                DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+                DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+                DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+                DCD     FLASH_IRQHandler                  ; FLASH                                           
+                DCD     RCC_IRQHandler                    ; RCC                                             
+                DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+                DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+                DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+                DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+                DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+                DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+                DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+                DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+                DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+                DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+                DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+                DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+                DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+                DCD     0                                 ; Reserved                                                
+                DCD     0                                 ; Reserved                                               
+                DCD     0                                 ; Reserved                                             
+                DCD     0                                 ; Reserved                                               
+                DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+                DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+                DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+                DCD     TIM2_IRQHandler                   ; TIM2                                            
+                DCD     TIM3_IRQHandler                   ; TIM3                                            
+                DCD     TIM4_IRQHandler                   ; TIM4                                            
+                DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+                DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+                DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+                DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+                DCD     SPI1_IRQHandler                   ; SPI1                                            
+                DCD     SPI2_IRQHandler                   ; SPI2                                            
+                DCD     USART1_IRQHandler                 ; USART1                                          
+                DCD     USART2_IRQHandler                 ; USART2                                          
+                DCD     0                                 ; Reserved                                          
+                DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+                DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+                DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+                DCD     0                                 ; Reserved                  
+                DCD     0                                 ; Reserved                 
+                DCD     0                                 ; Reserved
+                DCD     0                                 ; Reserved                                   
+                DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+                DCD     0                                 ; Reserved                                             
+                DCD     SDIO_IRQHandler                   ; SDIO                                            
+                DCD     TIM5_IRQHandler                   ; TIM5                                            
+                DCD     SPI3_IRQHandler                   ; SPI3                                            
+                DCD     0                                 ; Reserved                                           
+                DCD     0                                 ; Reserved                                           
+                DCD     0                                 ; Reserved                   
+                DCD     0                                 ; Reserved                   
+                DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+                DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+                DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+                DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+                DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4
+                DCD     0                                 ; Reserved  
+                DCD     0                                 ; Reserved  
+                DCD     0                                 ; Reserved                                              
+                DCD     0                                 ; Reserved                                               
+                DCD     0                                 ; Reserved                                               
+                DCD     0                                 ; Reserved                                               
+                DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+                DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+                DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+                DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+                DCD     USART6_IRQHandler                 ; USART6                                           
+                DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+                DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+                DCD     0                                 ; Reserved                     
+                DCD     0                                 ; Reserved                       
+                DCD     0                                 ; Reserved                         
+                DCD     0                                 ; Reserved                                    
+                DCD     0                                 ; Reserved  
+                DCD     0                                 ; Reserved				                              
+                DCD     0                                 ; Reserved
+                DCD     FPU_IRQHandler                    ; FPU
+                DCD     0                                 ; Reserved
+		DCD     0                                 ; Reserved
+		DCD     SPI4_IRQHandler                   ; SPI4
+                                         
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                   [WEAK]                                        
+                EXPORT  PVD_IRQHandler                    [WEAK]                      
+                EXPORT  TAMP_STAMP_IRQHandler             [WEAK]         
+                EXPORT  RTC_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  FLASH_IRQHandler                  [WEAK]                                         
+                EXPORT  RCC_IRQHandler                    [WEAK]                                            
+                EXPORT  EXTI0_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI1_IRQHandler                  [WEAK]                                             
+                EXPORT  EXTI2_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI3_IRQHandler                  [WEAK]                                           
+                EXPORT  EXTI4_IRQHandler                  [WEAK]                                            
+                EXPORT  DMA1_Stream0_IRQHandler           [WEAK]                                
+                EXPORT  DMA1_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream2_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream3_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream4_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  ADC_IRQHandler                    [WEAK]                                                                        
+                EXPORT  EXTI9_5_IRQHandler                [WEAK]                                    
+                EXPORT  TIM1_BRK_TIM9_IRQHandler          [WEAK]                  
+                EXPORT  TIM1_UP_TIM10_IRQHandler          [WEAK]                
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler     [WEAK] 
+                EXPORT  TIM1_CC_IRQHandler                [WEAK]                                   
+                EXPORT  TIM2_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM3_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM4_IRQHandler                   [WEAK]                                            
+                EXPORT  I2C1_EV_IRQHandler                [WEAK]                                             
+                EXPORT  I2C1_ER_IRQHandler                [WEAK]                                             
+                EXPORT  I2C2_EV_IRQHandler                [WEAK]                                            
+                EXPORT  I2C2_ER_IRQHandler                [WEAK]                                               
+                EXPORT  SPI1_IRQHandler                   [WEAK]                                           
+                EXPORT  SPI2_IRQHandler                   [WEAK]                                            
+                EXPORT  USART1_IRQHandler                 [WEAK]                                          
+                EXPORT  USART2_IRQHandler                 [WEAK]                                                                                  
+                EXPORT  EXTI15_10_IRQHandler              [WEAK]                                  
+                EXPORT  RTC_Alarm_IRQHandler              [WEAK]                  
+                EXPORT  OTG_FS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  DMA1_Stream7_IRQHandler           [WEAK]                                                                                     
+                EXPORT  SDIO_IRQHandler                   [WEAK]                                             
+                EXPORT  TIM5_IRQHandler                   [WEAK]                                             
+                EXPORT  SPI3_IRQHandler                   [WEAK]                                                               
+                EXPORT  DMA2_Stream0_IRQHandler           [WEAK]                                  
+                EXPORT  DMA2_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream2_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream3_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream4_IRQHandler           [WEAK]                                                                                                     
+                EXPORT  OTG_FS_IRQHandler                 [WEAK]                                       
+                EXPORT  DMA2_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream7_IRQHandler           [WEAK]                                   
+                EXPORT  USART6_IRQHandler                 [WEAK]                                           
+                EXPORT  I2C3_EV_IRQHandler                [WEAK]                                              
+                EXPORT  I2C3_ER_IRQHandler                [WEAK]                                              
+                EXPORT  FPU_IRQHandler                    [WEAK]
+				EXPORT  SPI4_IRQHandler                   [WEAK]
+                
+WWDG_IRQHandler                                                       
+PVD_IRQHandler                                      
+TAMP_STAMP_IRQHandler                  
+RTC_WKUP_IRQHandler                                
+FLASH_IRQHandler                                                       
+RCC_IRQHandler                                                            
+EXTI0_IRQHandler                                                          
+EXTI1_IRQHandler                                                           
+EXTI2_IRQHandler                                                          
+EXTI3_IRQHandler                                                         
+EXTI4_IRQHandler                                                          
+DMA1_Stream0_IRQHandler                                       
+DMA1_Stream1_IRQHandler                                          
+DMA1_Stream2_IRQHandler                                          
+DMA1_Stream3_IRQHandler                                          
+DMA1_Stream4_IRQHandler                                          
+DMA1_Stream5_IRQHandler                                          
+DMA1_Stream6_IRQHandler                                          
+ADC_IRQHandler                                                                                                    
+EXTI9_5_IRQHandler                                                
+TIM1_BRK_TIM9_IRQHandler                        
+TIM1_UP_TIM10_IRQHandler                      
+TIM1_TRG_COM_TIM11_IRQHandler  
+TIM1_CC_IRQHandler                                               
+TIM2_IRQHandler                                                           
+TIM3_IRQHandler                                                           
+TIM4_IRQHandler                                                           
+I2C1_EV_IRQHandler                                                         
+I2C1_ER_IRQHandler                                                         
+I2C2_EV_IRQHandler                                                        
+I2C2_ER_IRQHandler                                                           
+SPI1_IRQHandler                                                          
+SPI2_IRQHandler                                                           
+USART1_IRQHandler                                                       
+USART2_IRQHandler                                                                                                           
+EXTI15_10_IRQHandler                                            
+RTC_Alarm_IRQHandler                            
+OTG_FS_WKUP_IRQHandler                                                                           
+DMA1_Stream7_IRQHandler                                                                                                             
+SDIO_IRQHandler                                                            
+TIM5_IRQHandler                                                            
+SPI3_IRQHandler                                                                                     
+DMA2_Stream0_IRQHandler                                         
+DMA2_Stream1_IRQHandler                                          
+DMA2_Stream2_IRQHandler                                           
+DMA2_Stream3_IRQHandler                                           
+DMA2_Stream4_IRQHandler                                                                                                                                  
+OTG_FS_IRQHandler                                                    
+DMA2_Stream5_IRQHandler                                          
+DMA2_Stream6_IRQHandler                                          
+DMA2_Stream7_IRQHandler                                          
+USART6_IRQHandler                                                        
+I2C3_EV_IRQHandler                                                          
+I2C3_ER_IRQHandler                                                          
+FPU_IRQHandler
+SPI4_IRQHandler
+           
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
--- a/board/NUCLEO_STM32F401RE/TOS_CONFIG/tos_config.h
+++ b/board/NUCLEO_STM32F401RE/TOS_CONFIG/tos_config.h
@@ -0,0 +1,46 @@
+   #ifndef TOS_CONFIG_H
+   #define  TOS_CONFIG_H
+
+   #include "stm32f4xx.h"				                   // ???????,??????????
+
+   #define TOS_CFG_TASK_PRIO_MAX           10u			// ??TencentOS tiny????????????
+
+   #define TOS_CFG_ROUND_ROBIN_EN          1u				// ??TencentOS tiny????????????
+
+   #define TOS_CFG_OBJECT_VERIFY           0u			// ??TencentOS tiny????????
+
+   #define TOS_CFG_EVENT_EN                1u				// TencentOS tiny ???????
+
+   #define TOS_CFG_MMBLK_EN                1u   		//??TencentOS tiny???????????
+
+   #define TOS_CFG_MMHEAP_EN               1u		// ??TencentOS tiny??????????
+
+   #define TOS_CFG_MMHEAP_POOL_SIZE        0x100	// ??TencentOS tiny???????
+
+   #define TOS_CFG_MUTEX_EN                1u		// ??TencentOS tiny?????????
+
+   #define TOS_CFG_QUEUE_EN                1u		// ??TencentOS tiny????????
+
+   #define TOS_CFG_TIMER_EN                1u		// ??TencentOS tiny???????????
+
+   #define TOS_CFG_SEM_EN                  1u		// ??TencentOS tiny?????????
+   
+   #define TOS_CFG_TICKLESS_EN             0u   // ??Tickless ???????
+   
+   #if (TOS_CFG_QUEUE_EN > 0u)
+   #define TOS_CFG_MSG_EN     1u
+   #else
+   #define TOS_CFG_MSG_EN     0u
+   #endif
+
+   #define TOS_CFG_MSG_POOL_SIZE           10u		// ??TencentOS tiny??????
+
+   #define TOS_CFG_IDLE_TASK_STK_SIZE      128u		// ??TencentOS tiny???????
+
+   #define TOS_CFG_CPU_TICK_PER_SECOND     1000u	// ??TencentOS tiny?tick??
+
+   #define TOS_CFG_CPU_CLOCK     (SystemCoreClock)	// ??TencentOS tiny CPU??
+
+   #define TOS_CFG_TIMER_AS_PROC           1u		// ?????TIMER???????
+
+   #endif