you can use at framework to send/recv data in socket API
example: see examples\tcp_through_module_based_at_socket
project: see board\TencentOS_tiny_EVB_MX_Plus\KEIL\tcp_through_module_based_at_socket
1. in tos_at.h, added int fuzzy_matching; field into at_echo_st struct, if this field is set to K_TRUE, then if echo message contains the string in "echo_expect" field.
2. added __API__ int tos_at_echo_fuzzy_matching_create(at_echo_t *echo, char *buffer, size_t buffer_size, char *echo_expect_contains) api to tos_at.c, which will create an at_echo_t with fuzzy_matching = K_TRUE;
3. added RHF76_ATCMD_SET_DELAY and rhf76_set_delay to RHF76.h to allow set/query RX delay config
4. added RHF76_ATCMD_SET_DATA_RATE and rhf76_set_data_rate to RHF76.h to allow set/query date rate config
5. added rhf76_at_cmd_exe for DEBUG purpose, so that user can execute any AT+ commands they want
6. added code in lora_demo.c to demonstrate package segmentation.
1. implemented HAL_StatusTypeDef HAL_FLASH_ReadWord(uint32_t Address, uint32_t* Data); and HAL_StatusTypeDef HAL_FLASH_ReadHalfWord(uint32_t Address, uint16_t* Data); which allows user to read the internal FLASH (with out read protection)
2. implemeted device_config struct to store device configurations, e.g. magnetometer fullscale, report period, etc.
3. added demonstration code of using flash reading apis in lora_demo.c, in which the configuration sent from the cloud is stored into the internal Data EEPROM bank1, and each time when the device is booted, the configurations would be loaded from the Data EEPROM and used to initialize the application.
1. added AT+ command "AT+MSGHEX" and change previous RHF76_ATCMD_FMT_SEND_MSGHEX to RHF76_ATCMD_FMT_SEND_CMSGHEX
2. implement send_unconfirmed with a non-breaking approach: added int (*send_unconfirmed)(const void *buf, size_t len); event handle in lora_module_st; added int tos_lora_module_send_unconfirmed(const void *buf, size_t len); in lora_module_wrapper.c; and implement static int rhf76_send_unconfirmed(const void *buf, size_t len) in RHF76.c
3. added { "+MSGHEX: PORT:", rhf76_incoming_data_process } in event array rhf76_at_event so that the device is able to process the downlink data when it is configurated to send unconfirmed message.
4. added AT+ command "AT+REPT", and implement the static int rhf76_set_repeat(uint8_t num) to enable user to set repeat times (1-15) while using "unconfirmed message"
5. updated the instructions of implemeting up-link parser and downlink parser on the server in the file "..\board\NUCLEO_STM32L073RZ\BSP\Src\lora_demo.c"
1. modified code in recv_callback, which allows user to set the fullscale magnetometer and report period
2. modified the sample javascript code for uplink and downlink data parser on the cloud
