first commit

README.md

@@ -0,0 +1 @@
+STM32F1x系列工程模板、模块模板、外设模板

module_Template/ADXL345/ADXL345.c

@@ -0,0 +1,148 @@
+/*
+ADXL345三轴倾斜度模块
+*/
+#include "main.h"
+
+/**
+  * @brief  ADXL345初始化
+  * @param  None
+  * @retval None
+  */
+uint8_t ADXL345_init(void)
+{
+	if(ADXL345_read_reg(DEVICE_ID) == 0xE5)
+	{
+		ADXL345_write_reg(0X31,0X0B); // 低电平中断输出,13位全分辨率,输出数据右对齐,16g量程 
+		ADXL345_write_reg(0x2C,0x0E); // 数据输出速度为100Hz
+		ADXL345_write_reg(0x2D,0x08); // 链接使能,测量模式,省电特性
+		ADXL345_write_reg(0X2E,0x80); // 不使用中断		 
+	 	ADXL345_write_reg(0X1E,0x00);
+		ADXL345_write_reg(0X1F,0x00);
+		ADXL345_write_reg(0X20,0x05);
+		return 0;
+	}
+	return 1;
+}
+/**
+  * @brief  ADXL345写寄存器
+  * @param  None
+  * @retval None
+  */
+uint8_t ADXL345_write_reg(u8 addr,u8 val) 
+{
+	IIC_start();  				 
+	IIC_send_byte(slaveaddress); // 发送写器件指令	 
+	if(IIC_wait_ack())
+	{
+		return 1;
+	}    
+  IIC_send_byte(addr); // 发送寄存器地址
+	if(IIC_wait_ack())
+	{
+		return 2;
+	} 	 										  		   
+	IIC_send_byte(val); // 发送值					   
+	if(IIC_wait_ack())
+	{
+		return 3;
+	}   		    	   
+  IIC_stop(); // 产生一个停止条件 	   
+	return 0;
+}
+/**
+  * @brief  ADXL345读寄存器
+  * @param  None
+  * @retval None
+  */
+u8 ADXL345_read_reg(u8 addr)
+{
+	u8 temp=0;		 
+	IIC_start();  				 
+	IIC_send_byte(slaveaddress); // 发送写器件指令	 
+	if(IIC_wait_ack())
+	{
+		return 1;
+	}   
+  IIC_send_byte(addr); // 发送寄存器地址
+	if(IIC_wait_ack())
+	{
+		return 2;
+	}  										  		   
+	IIC_start(); // 重新启动
+	IIC_send_byte(regaddress); // 发送读器件指令	 
+	if(IIC_wait_ack())
+	{
+		return 3;
+	} 	   
+  temp=IIC_read_byte(0); // 读取一个字节,不继续再读,发送NAK
+  IIC_stop(); // 产生一个停止条件 	    
+	return temp;
+}
+/**
+  * @brief  ADXL345读取数据
+  * @param  None
+  * @retval None
+  */
+void ADXL345_read_data(short *x,short *y,short *z)
+{
+	u8 buf[6];
+	u8 i;
+	IIC_start();  				 
+	IIC_send_byte(slaveaddress); // 发送写器件指令	 
+	IIC_wait_ack();	   
+  IIC_send_byte(0x32); // 发送寄存器地址(数据缓存的起始地址为0X32)
+	IIC_wait_ack(); 	 										  		   
+ 
+ 	IIC_start(); // 重新启动
+	IIC_send_byte(regaddress); // 发送读器件指令
+	IIC_wait_ack();
+	for(i=0;i<6;i++)
+	{
+		if(i==5)buf[i]=IIC_read_byte(0); // 读取一个字节,不继续再读,发送NACK  
+		else buf[i]=IIC_read_byte(1);	// 读取一个字节,继续读,发送ACK 
+ 	}	        	   
+  IIC_stop();	// 产生一个停止条件
+	*x=(short)(((u16)buf[1]<<8)+buf[0]); // 合成数据    
+	*y=(short)(((u16)buf[3]<<8)+buf[2]); 	    
+	*z=(short)(((u16)buf[5]<<8)+buf[4]); 
+}
+/**
+  * @brief  ADXL345连读读取几次取平均值
+  * @param  None
+  * @retval None
+  */
+void ADXL345_read_average(short *x,short *y,short *z,u8 times)
+{
+	u8 i;
+	short tx,ty,tz;
+	*x=0;
+	*y=0;
+	*z=0;
+	if(times)//读取次数不为0
+	{
+		for(i=0;i<times;i++)//连续读取times次
+		{
+			ADXL345_read_data(&tx,&ty,&tz);
+			*x+=tx;
+			*y+=ty;
+			*z+=tz;
+			DELAYClass.DelayMs(5);
+		}
+		*x/=times;
+		*y/=times;
+		*z/=times;
+	}
+}
+/**
+  * @brief  ADXL345计算角度
+  * @param  None
+  * @retval None
+  */
+void get_angle(float *x_angle,float *y_angle,float *z_angle)
+{
+	short ax,ay,az;
+	ADXL345_read_average(&ax,&ay,&az,10);
+	*x_angle=atan(ax/sqrt((az*az+ay*ay)))*180/3.14;
+	*y_angle=atan(ay/sqrt((ax*ax+az*az)))*180/3.14;
+	*z_angle=atan(sqrt((ax*ax+ay*ay)/az))*180/3.14;
+}

module_Template/ADXL345/ADXL345.h

@@ -0,0 +1,121 @@
+#ifndef __ADXL345_H
+#define __ADXL345_H
+#include "main.h"
+
+#define X_AXLE 0   //x轴
+#define Y_AXLE 1   //y轴
+#define Z_AXLE 2   //z轴
+
+#define	slaveaddress   0xA6	  //定义器件在IIC总线中的从地址,根据ALT  ADDRESS地址引脚不同修改
+//                              ALT  ADDRESS引脚接地时地址为0xA6，接电源时地址为0x3A
+
+#define THRESH_TAP     0X1D	  //敲击中断阈值(用于正常敲击检测)
+//                              16g模式中,62.5mg/Bit
+
+#define OFSX           0X1E   //X轴偏移寄存器  15.6mg/Bit  0xff = 4g
+#define OFSY           0X1F   //X轴偏移寄存器  15.6mg/Bit  0xff = 4g
+#define OFSZ           0X20   //X轴偏移寄存器  15.6mg/Bit  0xff = 4g
+#define DUR            0x21   //敲击阈值时间   625uS/Bit
+#define LATENT         0X22   //敲击事件到时间窗口的延迟时间,在此期间
+//                              可检测第二次敲击时间  1.25mg/Bit
+#define WINDOW         0X23   //敲击窗口,延迟时间满后的时间量,在此期间
+//                              能开始进行第二次有效敲击  1.25mg/Bit
+#define THRESH_ACT     0X24   //检测活动的阈值,活动事件的幅度与该寄存器
+//                              的值进行比较  62.5mg/Bit
+#define	THRESH_INACT   0X25   //检测静止的阈值,静止事件的幅度与该寄存器
+//                              的值进行比较  62.5mg/Bit
+#define TIME_INACT     0X26   //加速度时间量小于该寄存器的值表示静止 1S/Bit
+
+#define ACT_INACT_CTL  0X27 
+//Bit  7,3  ACT交流/直流[INACT交流/直流]:0选择直流耦合;1使能交流耦合 直流时将
+//                                       当前加速度值直接与THRESH_ACT和THRESH_INACT
+//                                       进行比较,确定检测到的是活动还是静止
+//     6,2  ACT_X使能[INACT_X使能]:设置为1,使能X轴参与检测活动或静止;活动检测时,
+//                                 所有轴为逻辑"或",有任意轴超过阈值时,活动功能触发
+//                                 禁止检测时,所有轴为逻辑"与",只有当所有轴低于阈值
+//                                 时,静止功能触发
+//     5,1  ACT_Y使能[INACT_Y使能]:与X轴类似 
+//     4,0  ACT_Z使能[INACT_Z使能]:与X轴类似
+#define THRESH_FF      0X28   //阈值,用于自由落体检测,所有轴加速度与该寄存器值比较
+//                              ,以确定是否发生自由落体 62.5mg/Bit,建议300mg与600mg之间
+#define TIME_FF        0X29   //维持THRESH_FF阈值的最小时间,以生成自由落体中断 5mS/Bit
+
+#define TAP_AXES       0X2A   
+// Bit  7:4  0
+//       3   抑制  两次敲击之间出现大于THRESH_TAP值得加速度,设置抑制会抑制双击检测
+//       2   TAP_X使能  设置为1时,使能X轴进行敲击检测,0时排除该轴的敲击检测
+//       1   TAP_Y使能  设置为1时,使能Y轴进行敲击检测,0时排除该轴的敲击检测
+//       0   TAP_Z使能  设置为1时,使能Z轴进行敲击检测,0时排除该轴的敲击检测
+#define ACT_TAP_STATUS 0X2B   /*只读寄存器*/
+// Bit  7   0
+//     6,2  ACT_X来源,TAP_X来源:表示涉及敲击或活动事件的第一轴,设置为1时,对应事件参与
+//                              设置为0时,对应未参与.不会自动清零,新数据覆盖,中断清零前
+//                              应读取该寄存器
+//     5,1	ACT_Y来源,TAP_Y来源:与X相似
+//     4,0	ACT_Z来源,TAP_Z来源:与X相似
+//      3   休眠设置为1时,器件进入休眠状态
+#define BW_RATE        0X2C  
+// Bit  7:5   0
+//       4	 LOW_POWER 低功耗位,0选择正常模式,1进入低功耗模式
+//      3:0  速率位
+#define POWER_CTL      0X2D
+// Bit  7,6   0
+//       5    链接   设置1时,延迟活动开始,直到检测到静止.检测到活动后,禁止检测开始,活动
+//                   检测停止,设置时动态链接活动和静止交替检测;设置0时静止与活动同时检测
+//       4    AUTO_SLEEP  设置1时自动休眠,检测出静止后,进行休眠模式,活动使能后被唤醒
+//       3    测量   0待机 1测量模式
+//       2	  休眠   0普通 1休眠
+//      1,0	  唤醒(休眠模式下的读取频率) "00":8HZ  "01":4HZ  "10":2HZ  "11":1HZ
+#define INT_ENABLE     0X2E  //中断使能配置
+// Bit  7  DATA_READY
+//      6  SINGLE_TAP
+//      5  DOUBLE_TAP
+//      4  Activity
+//      3  Inactivity
+//      2  FREE_FALL   自由落体中断
+//      1  Watermark
+//      0  Overrun
+#define INT_MAP        0X2F   //中断映射 自读寄存器
+//位与INT_ENABLE对应,,设置为0,该中断映射到INT1引脚;设置为1,该中断映射到INT2引脚
+#define INT_SOURCE     0X30   //中断来源
+//位与INT_ENABLE对应,1表示该功能触发
+#define DATA_FORMAT    0X31
+// Bit   7  SELF_TEST  设置1,自测力应用至传感器,造成输出数据转换;0时禁用自测力
+//       6  SPI        1设置为3线SPI模式,0时设置4线SPI模式
+//       5  INT_INVERT 0时中断高电平有效,1时低电平有效
+//       4	0
+//       3  FULL_RES   1时设置全分辨率模式,输出以4mg/Bit增加;0时为10位模式
+//       2  Justify    1为左对齐模式;8为右对齐模式,并带有符号扩展
+//      1:0 范围位     "00"±2g  "01"±4g  "10"±8g  "11"±16g
+#define DATAX0         0X32
+#define DATAX1         0X33  //与DATAX0组成x轴输出数据(二进制补码),DATAX1为高位,4mg/Bit
+#define DATAY0         0X34
+#define DATAY1         0X35  //与DATAY0组成Y轴输出数据(二进制补码),DATAY1为高位,4mg/Bit
+#define DATAZ0         0X36
+#define DATAZ1         0X37  //与DATAZ0组成Z轴输出数据(二进制补码),DATAZ1为高位,4mg/Bit
+#define FIFO_CTL       0X38
+// Bit  7,6  FIFO_MODE  "00" 旁路模式
+//						"01" FIFO模式 可收集最多32个值,然后停止收集数据
+//						"10" 流模式   FIFO保存最后32个数据值,FIFO满时,新数据覆盖最早数据(先进先出)
+//						"11" 触发器   通过触发位触发,FIFO在触发事件前保存最后的数据样本,然后
+//									  继续收集数据直到填满;填满后,不再收集新数据
+//		 5   触发位     0链接触发器模式下的触发事件至INT1,1链接至INT2
+//		 4:0 样本		功能取决于FIFO模式:FIFO模式时,指定触发水印中断需要的FIFO条目数
+//                                         流模式时,指定触发水印中断需要的FIFO条目数
+//                                         触发器模式:指定触发事件之前在FIFO缓冲区要保留的FIFO样本数
+//                      样本位设置为0时,不管哪种FIFO模式,立即在INT_SOURCE寄存器设置水印状态位
+#define FIFO_STATUS    0X39	  /*只读寄存器*/
+// Bit   7   FIFO_TRIG  FIFO_TRIG为1时表示有触发事件发生 
+//       6   0
+//      5:0	 条目位 报告FIFO存储的数据值的数量
+
+//#define slaveaddress 0XA6//write
+#define regaddress 0XA7//read
+#define DEVICE_ID 0X00
+uint8_t ADXL345_init(void);
+u8 ADXL345_read_reg(u8 addr);
+uint8_t ADXL345_write_reg(u8 addr,u8 val);
+void ADXL345_read_data(short *x,short *y,short *z);
+void ADXL345_read_average(short *x,short *y,short *z,u8 times);
+void get_angle(float *x_angle,float *y_angle,float *z_angle);
+#endif

module_Template/ADXL345/IIC.c

@@ -0,0 +1,205 @@
+#include "main.h"
+
+
+#define IIC_SDA_PORT		GPIOA
+#define IIC_SDA_CLK			(RCC_APB2Periph_GPIOA)
+#define IIC_SDA_PIN			GPIO_Pin_5
+#define IIC_SCL_PORT		GPIOA
+#define IIC_SCL_CLK			(RCC_APB2Periph_GPIOA)
+#define IIC_SCL_PIN			GPIO_Pin_6
+
+#define IIC_SCL_OUT_1		IIC_SCL_PORT->BSRR = (uint32_t)IIC_SCL_PIN // 置1
+#define IIC_SCL_OUT_0		IIC_SCL_PORT->BRR = (uint32_t)IIC_SCL_PIN
+#define IIC_SDA_OUT_1		IIC_SDA_PORT->BSRR = (uint32_t)IIC_SDA_PIN // 置1
+#define IIC_SDA_OUT_0		IIC_SDA_PORT->BRR = (uint32_t)IIC_SDA_PIN
+#define IIC_SDA_IN()		((IIC_SDA_PORT->IDR & IIC_SDA_PIN) != 0)
+
+/**
+  * @brief  IIC延时
+  * @param  None
+  * @retval None
+  */
+static void IIC_Delay(void)
+{
+	uint8_t i;
+	/*　
+	 	下面的时间是通过逻辑分析仪测试得到的。
+    工作条件：CPU主频72MHz ，MDK编译环境，1级优化
+  
+		循环次数为10时，SCL频率 = 205KHz 
+		循环次数为7时，SCL频率 = 347KHz， SCL高电平时间1.5us，SCL低电平时间2.87us 
+	 	循环次数为5时，SCL频率 = 421KHz， SCL高电平时间1.25us，SCL低电平时间2.375us 
+	*/
+	for (i = 0; i < 10; i++);
+}
+/**
+  * @brief  SDA输出方向配置
+  * @param  None
+  * @retval None
+  */
+void Set_IIC_SDA_OUT(void)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;	
+	RCC_APB2PeriphClockCmd(IIC_SDA_CLK, ENABLE);
+	GPIO_InitStructure.GPIO_Pin=IIC_SDA_PIN;
+	GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;
+	GPIO_InitStructure.GPIO_Mode=GPIO_Mode_Out_OD;
+	GPIO_Init(IIC_SDA_PORT,&GPIO_InitStructure); 						
+}
+/**
+  * @brief  SDA输入方向配置
+  * @param  None
+  * @retval None
+  */
+void Set_IIC_SDA_IN(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;	
+	RCC_APB2PeriphClockCmd(IIC_SDA_CLK, ENABLE);
+	GPIO_InitStructure.GPIO_Pin=IIC_SDA_PIN;
+	GPIO_InitStructure.GPIO_Mode=GPIO_Mode_IPU;
+	GPIO_Init(IIC_SDA_PORT,&GPIO_InitStructure);
+}
+/**
+  * @brief  模拟IIC初始化
+  * @param  None
+  * @retval None
+  */
+void IIC_init()
+{
+	GPIO_InitTypeDef  GPIO_InitStructure;
+	RCC_APB2PeriphClockCmd(IIC_SDA_CLK | IIC_SCL_CLK, ENABLE);
+	GPIO_InitStructure.GPIO_Pin = IIC_SDA_PIN;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; 		
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;	
+	GPIO_Init(IIC_SDA_PORT, &GPIO_InitStructure);	
+	GPIO_InitStructure.GPIO_Pin = IIC_SCL_PIN;
+	GPIO_Init(IIC_SCL_PORT, &GPIO_InitStructure);	
+	IIC_stop();
+}
+/**
+  * @brief  模拟IIC起始信号
+  * @param  None
+  * @retval None
+  */
+void IIC_start()
+{
+	Set_IIC_SDA_OUT();
+	IIC_SCL_OUT_1;
+	IIC_SDA_OUT_1;
+	IIC_Delay();
+	IIC_SDA_OUT_0;
+	IIC_Delay();
+	IIC_SCL_OUT_0;
+	IIC_Delay();
+}
+/**
+  * @brief  模拟IIC停止信号
+  * @param  None
+  * @retval None
+  */
+void IIC_stop()
+{
+	Set_IIC_SDA_OUT();
+	IIC_SCL_OUT_1;
+	IIC_SDA_OUT_0;
+	IIC_Delay();
+	IIC_SDA_OUT_1;
+}
+/**
+  * @brief  模拟IIC主机应答
+  * @param  None
+  * @retval None
+  */
+void IIC_ack()
+{
+	Set_IIC_SDA_OUT();
+  IIC_SDA_OUT_0;
+	IIC_Delay();
+	IIC_SCL_OUT_1;
+	IIC_Delay();
+	IIC_SCL_OUT_0;
+	IIC_Delay();	
+	IIC_SDA_OUT_1;
+}
+/**
+  * @brief  模拟IIC主机不应答
+  * @param  None
+  * @retval None
+  */
+void IIC_noack()
+{
+	Set_IIC_SDA_OUT();
+  IIC_SDA_OUT_1;
+	IIC_Delay();
+	IIC_SCL_OUT_1;
+	IIC_Delay();
+	IIC_SCL_OUT_0;
+	IIC_Delay();
+}
+/**
+  * @brief  模拟IIC等待从机应答
+  * @param  None
+	* @retval 1: 接收应答失败 0: 接收应答成功
+  */
+uint8_t IIC_wait_ack()
+{
+	uint8_t rec = 0;
+	Set_IIC_SDA_OUT();
+	IIC_SDA_OUT_1;
+	IIC_Delay();
+	Set_IIC_SDA_IN();
+	IIC_SCL_OUT_1;
+	IIC_Delay();
+	rec = IIC_SDA_IN();
+	IIC_SCL_OUT_0;
+	IIC_Delay();
+	
+	return rec;
+}
+/**
+	* @brief  模拟IIC发送一个字节
+  * @param  None
+  * @retval None
+  */
+void IIC_send_byte(uint8_t txd)
+{
+	uint8_t i=0;
+	Set_IIC_SDA_OUT();
+	for(i=0;i<8;i++)
+	{
+		if(txd&0x80) IIC_SDA_OUT_1;
+		else IIC_SDA_OUT_0;
+		IIC_Delay();
+		IIC_SCL_OUT_1;
+		IIC_Delay(); // 发送数据
+		IIC_SCL_OUT_0;
+		if(i == 7) IIC_SDA_OUT_1; // 最后一位数据发送完要释放SDA总线
+		txd <<= 1;
+		IIC_Delay();
+	}
+}
+/**
+	* @brief  模拟IIC读取一个字节
+	* @param  ack: 0,读完不产生应答 1,读完产生应答
+  * @retval 返回读取到的字节
+  */
+uint8_t IIC_read_byte(uint8_t ack)
+{
+	uint8_t i,receive=0;
+	Set_IIC_SDA_IN();
+	for(i=0;i<8;i++)
+	{
+		receive <<= 1;
+		IIC_SCL_OUT_1;
+		IIC_Delay();
+		if(IIC_SDA_IN()) receive++; // 连续读取八位
+		IIC_SCL_OUT_0;
+		IIC_Delay();	
+	}
+  if(!ack) IIC_noack();
+	else IIC_ack();
+
+	return receive; // 返回读取到的字节
+}
+
+	

module_Template/ADXL345/IIC.h

@@ -0,0 +1,16 @@
+#ifndef __IIC_H
+#define __IIC_H
+
+#include "main.h"
+
+void Set_IIC_SDA_OUT(void);
+void Set_IIC_SDA_IN(void);
+void IIC_init(void);
+void IIC_start(void);
+void IIC_stop(void);
+void IIC_ack(void);
+void IIC_noack(void);
+uint8_t IIC_wait_ack(void);
+void IIC_send_byte(uint8_t txd);
+uint8_t IIC_read_byte(uint8_t ack);
+#endif

module_Template/ADXL345/README.txt

@@ -0,0 +1 @@
+ADXL345数字三轴倾斜度模块

module_Template/ASR_CI1122/ASR_usart.c

@@ -0,0 +1,212 @@
+#include "main.h"
+
+static void USART_Config(void);
+static void Usart_SendByte(char ch);
+static void Usart_SendString(char *str);
+static void VoiceRecData_handle(void);
+static void voiceUsartString(char* str, char head, char value1, char value2);
+
+ASRUsartClassStruct ASRUsartClass = {
+	.Init = USART_Config,
+	.SendByte = Usart_SendByte,
+	.SendString = Usart_SendString,
+	.ASR_Handle = VoiceRecData_handle
+};
+
+char voiceUsartStringData[6];
+static uint8_t voiceUsartRecData = 0;
+
+#if 0
+#define  ASR_USARTx                   USART1
+#define  ASR_USART_CLK                RCC_APB2Periph_USART1
+#define  ASR_USART_APBxClkCmd         RCC_APB2PeriphClockCmd
+#define  ASR_USART_BAUDRATE           115200
+
+#define  ASR_USART_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  ASR_USART_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+    
+#define  ASR_USART_TX_GPIO_PORT       GPIOA   
+#define  ASR_USART_TX_GPIO_PIN        GPIO_Pin_9
+#define  ASR_USART_RX_GPIO_PORT       GPIOA
+#define  ASR_USART_RX_GPIO_PIN        GPIO_Pin_10
+
+#define  ASR_USART_IRQ                USART1_IRQn
+#define  ASR_USART_IRQHandler         USART1_IRQHandler
+
+#else
+#define  ASR_USARTx                   USART2
+#define  ASR_USART_CLK                RCC_APB1Periph_USART2
+#define  ASR_USART_APBxClkCmd         RCC_APB1PeriphClockCmd
+#define  ASR_USART_BAUDRATE           115200
+                                        
+#define  ASR_USART_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  ASR_USART_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+                                        
+#define  ASR_USART_TX_GPIO_PORT       GPIOA   
+#define  ASR_USART_TX_GPIO_PIN        GPIO_Pin_2
+#define  ASR_USART_RX_GPIO_PORT       GPIOA
+#define  ASR_USART_RX_GPIO_PIN        GPIO_Pin_3
+                                        
+#define  ASR_USART_IRQ                USART2_IRQn
+#define  ASR_USART_IRQHandler         USART2_IRQHandler
+#endif
+
+/**
+ * @brief  串口初始化
+ * @param  None
+ * @retval None
+ * @note   None
+ */
+static void USART_Config(void)
+{
+	NVIC_InitTypeDef NVIC_InitStructure;
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+
+	ASR_USART_GPIO_APBxClkCmd(ASR_USART_GPIO_CLK, ENABLE);
+	
+	ASR_USART_APBxClkCmd(ASR_USART_CLK, ENABLE);
+
+	GPIO_InitStructure.GPIO_Pin = ASR_USART_TX_GPIO_PIN;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(ASR_USART_TX_GPIO_PORT, &GPIO_InitStructure);
+
+	GPIO_InitStructure.GPIO_Pin = ASR_USART_RX_GPIO_PIN;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(ASR_USART_RX_GPIO_PORT, &GPIO_InitStructure);
+	
+	USART_InitStructure.USART_BaudRate = ASR_USART_BAUDRATE;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No ;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+	USART_Init(ASR_USARTx, &USART_InitStructure);	
+
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	NVIC_InitStructure.NVIC_IRQChannel = ASR_USART_IRQ;  
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; 
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; 
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+	
+	USART_Cmd(ASR_USARTx, ENABLE);
+	
+	USART_ITConfig(ASR_USARTx, USART_IT_RXNE, ENABLE);   
+}
+/**
+ * @brief  ASR串口中断
+ * @param  None
+ * @retval None
+ */ 
+void ASR_USART_IRQHandler(void)
+{      
+	if(USART_GetITStatus(ASR_USARTx, USART_IT_RXNE) != RESET)
+	{
+		voiceUsartRecData = USART_ReceiveData(ASR_USARTx);
+#ifdef DEBUG_printf
+		printf("ASR ID : %d\n", voiceUsartRecData);
+#endif
+	}  				 											 
+}
+/**
+  * @brief  语音数据处理
+  * @param  None
+  * @retval None
+  * @note   接收语音模块传回的数据，进行指定操作
+	*/
+static void VoiceRecData_handle(void)
+{
+	if(voiceUsartRecData != 0)
+	{
+		switch(voiceUsartRecData)
+		{
+			case 0x5: // 打开窗帘
+				if(!AllFlag.window_CurrentSW_flag) AllFlag.window_SW_flag = 1;
+				break;
+			case 0x6: // 关闭窗帘
+				if(AllFlag.window_CurrentSW_flag) AllFlag.window_SW_flag = 2;
+				break;
+			case 0x7: // 打开灯光
+				AllFlag.LED_SW_flag = 1;
+				break;
+			case 0x8: // 关闭灯光
+				AllFlag.LED_SW_flag = 0;
+				break;
+			case 0x9: // 打开风扇
+				AllFlag.AutoCtrl_openTime = 0;
+				AllFlag.AutoCtrl_flag = 1;
+				GPIOClass.Set(FAN);
+				break;
+			case 0xA: // 关闭风扇
+				AllFlag.AutoCtrl_openTime = 0;
+				AllFlag.AutoCtrl_flag = 1;
+				GPIOClass.Reset(FAN);
+				break;
+			case 0xB: // 打开加湿器
+				AllFlag.AutoCtrl_openTime = 0;
+				AllFlag.AutoCtrl_flag = 1;
+				GPIOClass.Set(RELAY);
+				break;
+			case 0xC: // 关闭加湿器
+				AllFlag.AutoCtrl_openTime = 0;
+				AllFlag.AutoCtrl_flag = 1;
+				GPIOClass.Reset(RELAY);
+				break;
+			case 0xD: // 当前温度
+				voiceUsartString(voiceUsartStringData, 'A', DHT11Data.temp_int, DHT11Data.humi_int);
+				Usart_SendString(voiceUsartStringData);
+			case 0xE: // 当前湿度
+				voiceUsartString(voiceUsartStringData, 'A', DHT11Data.temp_int, DHT11Data.humi_int);
+				Usart_SendString(voiceUsartStringData);
+				break;
+		}
+		voiceUsartRecData = 0;
+	}
+}
+/**
+  * @brief  语音串口协议 拼接字符串
+	* @param  *str:字符串地址
+	* @param  head:帧头
+	* @param  value1:数据值
+	* @param  value2:数据值
+  * @retval None
+  * @note   None
+*/
+static void voiceUsartString(char* str, char head, char value1, char value2)
+{
+	str[0] = head;
+	str[1] = value1/10 + '0';
+	str[2] = value1%10 + '0';
+	str[3] = value2/10 + '0';
+	str[4] = value2%10 + '0';
+	str[5] = '\0';
+}
+/**
+ * @brief  阻塞发送一个字节
+ * @param  None
+ * @retval None
+ */
+static void Usart_SendByte(char ch)
+{
+	USART_SendData(ASR_USARTx,ch);
+		
+	while(USART_GetFlagStatus(ASR_USARTx, USART_FLAG_TXE) == RESET);	
+}
+/**
+ * @brief  阻塞发送字符串
+ * @param  None
+ * @retval None
+ */
+static void Usart_SendString(char *str)
+{
+	unsigned int k=0;
+  do 
+  {
+		Usart_SendByte(*(str + k) );
+		k++;
+  }while(*(str + k)!='\0');
+  
+  while(USART_GetFlagStatus(ASR_USARTx,USART_FLAG_TC)==RESET);
+}

module_Template/ASR_CI1122/ASR_usart.h

@@ -0,0 +1,14 @@
+#ifndef __ASR_USART_AS_H
+#define	__ASR_USART_AS_H
+
+#include "main.h"
+
+typedef struct {
+	void (* Init)(void);
+	void (* SendByte)(char ch);
+	void (* SendString)(char *str);
+	void (* ASR_Handle)(void);
+}ASRUsartClassStruct;
+
+extern ASRUsartClassStruct ASRUsartClass;
+#endif

module_Template/ASR_CI1122/语音串口协议.txt

@@ -0,0 +1,8 @@
+采用一帧5Byte的协议 均使用字符串
+Byte0：'A' (帧头代表该帧的含义)
+Byte1：'1' 
+Byte2：'2' 
+Byte3：'3' 
+Byte4：'4' 
+A1234 = A含义代表的变量的值为1234
+后4个字节可根据需要一个填入0-9999的数据，或者多个数据组合发送

module_Template/BY9301/BY9301.c

@@ -0,0 +1,159 @@
+/*
+BY9301语音播报模块
+*/
+#include "main.h"
+
+void BY9301_USART_Init(uint32_t baudRate);
+static void BY9301_SendString(uint8_t *str);
+static void BY9301_Say(uint8_t NOx);
+static uint8_t BY9301_Busy(void);
+
+BY9301ClassStruct BY9301Class = {
+	.Init = BY9301_USART_Init,
+	.Send = BY9301_SendString,
+	.Say = BY9301_Say,
+	.Busy = BY9301_Busy
+};
+
+// VOICE USART define
+#if	0
+#define  BY9301_USARTx_PORT               USART1
+#define  BY9301_USARTx_CLK                RCC_APB2Periph_USART1
+#define  BY9301_USARTx_APBxClkCmd         RCC_APB2PeriphClockCmd
+#define  BY9301_USARTx_PORT_CLK           (RCC_APB2Periph_GPIOA)
+#define  BY9301_USARTx_PORT_APBxClkCmd    RCC_APB2PeriphClockCmd
+#define  BY9301_USARTx_TX_PORT            GPIOA
+#define  BY9301_USARTx_TX_PIN             GPIO_Pin_9
+#define  BY9301_USARTx_RX_PORT            GPIOA
+#define  BY9301_USARTx_RX_PIN             GPIO_Pin_10
+#define  BY9301_USARTx_IRQ                USART1_IRQn
+#define  BY9301_USARTx_IRQHandler         USART1_IRQHandler
+#else
+#define  BY9301_USARTx_PORT               USART2
+#define  BY9301_USARTx_CLK                RCC_APB1Periph_USART2
+#define  BY9301_USARTx_APBxClkCmd         RCC_APB1PeriphClockCmd
+#define  BY9301_USARTx_PORT_CLK           (RCC_APB2Periph_GPIOA)
+#define  BY9301_USARTx_PORT_APBxClkCmd    RCC_APB2PeriphClockCmd
+#define  BY9301_USARTx_TX_PORT            GPIOA
+#define  BY9301_USARTx_TX_PIN             GPIO_Pin_2
+#define  BY9301_USARTx_RX_PORT            GPIOA
+#define  BY9301_USARTx_RX_PIN             GPIO_Pin_3
+#define  BY9301_USARTx_IRQ                USART2_IRQn
+#define  BY9301_USARTx_IRQHandler         USART2_IRQHandler
+#endif
+#define BUSY_GPIO_PORT    								GPIOA			              /* GPIO端口 */
+#define BUSY_GPIO_CLK 	    							RCC_APB2Periph_GPIOA		/* GPIO端口时钟 */
+#define BUSY_GPIO_PIN											GPIO_Pin_4			        /* 连接到SCL时钟线的GPIO */
+
+// BY9301TTS播报串口协议
+uint8_t BY9301Data[][8] = {
+{0x7e,0x04,0x31,0x1e,0x2b,0xef,'\n'}, // 设置音量30最大
+{0x7e,0x05,0x41,0x00,0x01,0x45,0xef,'\n'}, // 0001
+{0x7e,0x05,0x41,0x00,0x02,0x46,0xef,'\n'}, // 0002
+{0x7e,0x05,0x41,0x00,0x03,0x47,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x04,0x40,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x05,0x41,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x06,0x42,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x07,0x43,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x08,0x4c,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x09,0x4d,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x0a,0x4e,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x0b,0x4f,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x0c,0x48,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x0d,0x49,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x0e,0x4a,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x0f,0x4b,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x10,0x54,0xef,'\n'},
+{0x7e,0x05,0x41,0x00,0x11,0x55,0xef,'\n'}, // 0017
+};
+
+void BY9301_USARTx_IRQHandler(void)
+{
+	if(USART_GetITStatus(BY9301_USARTx_PORT, USART_IT_RXNE) != RESET) {
+		USART_ClearITPendingBit(BY9301_USARTx_PORT, USART_IT_RXNE);
+	}
+}
+/**
+  * @brief  语音串口USART初始化
+	* @param  baudRate: 波特率
+  * @retval None
+  */
+static void BY9301_USART_Init(uint32_t baudRate)
+{		
+	NVIC_InitTypeDef NVIC_InitStructure;
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+	/* GPIO时钟配置 */
+	BY9301_USARTx_PORT_APBxClkCmd(BY9301_USARTx_PORT_CLK, ENABLE);
+	/* 串口时钟配置 */
+	BY9301_USARTx_APBxClkCmd(BY9301_USARTx_CLK, ENABLE);
+	/* USART Tx--复用推挽输出 */
+	GPIO_InitStructure.GPIO_Pin = BY9301_USARTx_TX_PIN;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(BY9301_USARTx_TX_PORT, &GPIO_InitStructure);
+	/* USART Rx--浮空输入 */
+	GPIO_InitStructure.GPIO_Pin = BY9301_USARTx_RX_PIN;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(BY9301_USARTx_RX_PORT, &GPIO_InitStructure);
+	// BUSY输入
+	RCC_APB2PeriphClockCmd(BUSY_GPIO_CLK, ENABLE);
+	GPIO_InitStructure.GPIO_Pin = BUSY_GPIO_PIN;
+	GPIO_Init(BUSY_GPIO_PORT, &GPIO_InitStructure);
+	/* 串口参数配置 */
+	USART_InitStructure.USART_BaudRate = baudRate; // 波特率
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b; // 数据位
+	USART_InitStructure.USART_StopBits = USART_StopBits_1; // 停止位
+	USART_InitStructure.USART_Parity = USART_Parity_No; // 校验位
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; // 硬件流控
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; // 工作模式 收发一起
+	USART_Init(BY9301_USARTx_PORT, &USART_InitStructure);	// 串口初始化
+	/* 串口使能 */
+	USART_Cmd(BY9301_USARTx_PORT, ENABLE);
+	/* 串口中断使能 */
+	USART_ITConfig(BY9301_USARTx_PORT, USART_IT_RXNE, ENABLE);
+	/* NVIC优先级分组 */
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	/* NVIC参数配置*/
+	NVIC_InitStructure.NVIC_IRQChannel = BY9301_USARTx_IRQ;  // 中断源 有特定的命名
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3;  // 主优先级
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;  // 子优先级
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;  // 使能NVIC
+	NVIC_Init(&NVIC_InitStructure); // NVIC初始化
+}
+/**
+	* @brief  语音串口发送 具体协议参见手册 最后一个字节以\0结尾
+	* @param  str: 要发送的内容
+  * @retval None
+  */
+static void BY9301_SendString(uint8_t *str)
+{
+	unsigned int k=0;
+  do 
+  {
+      USART_SendData(BY9301_USARTx_PORT, *(str + k) );
+			/* 等待发送数据寄存器为空 */
+			while (USART_GetFlagStatus(BY9301_USARTx_PORT, USART_FLAG_TXE) == RESET){}
+      k++;
+  }while(*(str + k)!= '\n');
+  /* 等待发送完成 */
+  while(USART_GetFlagStatus(BY9301_USARTx_PORT, USART_FLAG_TC) == RESET){}
+}
+/**
+	* @brief  指定序号播报
+	* @param  NOx: mp3文件序号
+  * @retval None
+  */
+static void BY9301_Say(uint8_t NOx)
+{
+	BY9301_SendString(BY9301Data[NOx]);
+}
+/**
+	* @brief  Busy引脚状态
+	* @param  None
+  * @retval 返回Busy引脚电平状态
+  */
+static uint8_t BY9301_Busy(void)
+{
+	return GPIO_ReadInputDataBit(BUSY_GPIO_PORT, BUSY_GPIO_PIN);
+}

module_Template/BY9301/BY9301.h

@@ -0,0 +1,15 @@
+#ifndef __BY9301_AS_H
+#define	__BY9301_AS_H
+
+#include "main.h"
+
+typedef struct {
+	void (* Init)(uint32_t baudRate);
+	void (* Send)(uint8_t *str);
+	void (* Say)(uint8_t NOx);
+	uint8_t (* Busy)(void);
+} BY9301ClassStruct;
+
+extern BY9301ClassStruct BY9301Class;
+
+#endif

module_Template/DHT11/DHT11.c

@@ -0,0 +1,190 @@
+#include "main.h"
+//#include "delay.h"
+
+static void DHT11_GPIO_Init(void);
+static void DHT11_Mode_IPU(void);
+static void DHT11_Mode_Out_PP(void);
+static void DHT11_Reset(void);
+static uint8_t DHT11_Check(void);
+static uint8_t DHT11_Readbit(void);
+static uint8_t DHT11_ReadByte(void);
+static uint8_t DHT11_Read_TempAndHumidity(DHT11_Data_TypeDef *DHT11_Data);
+
+DHT11ClassStruct DHT11Class = {
+	.Init = DHT11_GPIO_Init,
+	.Read = DHT11_Read_TempAndHumidity
+};
+
+// 使用此变量接收DHT11数据
+DHT11_Data_TypeDef DHT11Data;
+
+#define	DHT11_Dout_GPIO_CLK     	RCC_APB2Periph_GPIOA
+#define	DHT11_Dout_GPIO_PORT     	GPIOA
+#define	DHT11_Dout_GPIO_PIN      	GPIO_Pin_15
+
+#define	DHT11_Dout_0	          	GPIO_ResetBits(DHT11_Dout_GPIO_PORT, DHT11_Dout_GPIO_PIN) 
+#define	DHT11_Dout_1	         		GPIO_SetBits(DHT11_Dout_GPIO_PORT, DHT11_Dout_GPIO_PIN) 
+#define	DHT11_Dout_IN()	     			GPIO_ReadInputDataBit(DHT11_Dout_GPIO_PORT, DHT11_Dout_GPIO_PIN)
+
+/**
+  * @brief  DHT11初始化
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DHT11_GPIO_Init(void)
+{		
+    GPIO_InitTypeDef GPIO_InitStructure; 
+
+    RCC_APB2PeriphClockCmd(DHT11_Dout_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE);	
+														   
+    GPIO_InitStructure.GPIO_Pin = DHT11_Dout_GPIO_PIN;	
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;   
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; 
+    GPIO_Init(DHT11_Dout_GPIO_PORT, &GPIO_InitStructure );
+
+		DHT11_Dout_1;
+}
+/**
+	* @brief  修改引脚为浮空输入
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DHT11_Mode_IPU(void)
+{
+    GPIO_InitTypeDef GPIO_InitStructure;
+	
+    GPIO_InitStructure.GPIO_Pin = DHT11_Dout_GPIO_PIN;
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; 
+    GPIO_Init(DHT11_Dout_GPIO_PORT, &GPIO_InitStructure);
+}
+/**
+	* @brief  修改引脚为推挽输出
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DHT11_Mode_Out_PP(void)
+{
+    GPIO_InitTypeDef GPIO_InitStructure;
+														   
+    GPIO_InitStructure.GPIO_Pin = DHT11_Dout_GPIO_PIN;	
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;   
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+    GPIO_Init(DHT11_Dout_GPIO_PORT, &GPIO_InitStructure);	 	 
+}
+/**
+	* @brief  DHT11复位
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DHT11_Reset(void)
+{
+	DHT11_Mode_Out_PP();
+	DHT11_Dout_0;
+	DELAYClass.DelayMs(20);
+	DHT11_Dout_1;
+	DELAYClass.DelayUs(30);
+}
+/**
+  * @brief  检测DHT11状态
+  * @param  None
+  * @retval 0: 在线,1: 未检测到设备
+	* @note   None
+*/
+static uint8_t DHT11_Check(void)
+{
+  uint8_t timeout = 0;
+	DHT11_Mode_IPU();
+  while (DHT11_Dout_IN() && timeout < 100)
+  {
+      timeout++;
+      DELAYClass.DelayUs(1);
+  }
+  if(timeout >= 100)
+  {
+      return 1;
+  }
+  timeout = 0;
+  while (!DHT11_Dout_IN() && timeout < 100)
+  {
+      timeout++;
+      DELAYClass.DelayUs(1);
+  };
+  if(timeout >= 100)
+  {
+      return 1;
+  }
+  return 0;
+}
+/**
+  * @brief  DHT11读取1bit
+  * @param  None
+  * @retval 返回读取的bit
+  * @note   None
+*/
+static uint8_t DHT11_Readbit(void)
+{
+	uint8_t timeout = 0;
+	while (DHT11_Dout_IN() && timeout < 100)
+  {
+    timeout++;
+    DELAYClass.DelayUs(1);
+  }
+	timeout = 0;
+	while (!DHT11_Dout_IN() && timeout < 100)
+  {
+    timeout++;
+    DELAYClass.DelayUs(1);
+  }
+	DELAYClass.DelayUs(40);
+	if(DHT11_Dout_IN())
+		return 1;
+  return 0;
+}
+/**
+  * @brief  DHT11读取1Byte
+  * @param  None
+  * @retval None
+  * @note   返回读取的Byte
+*/
+static uint8_t DHT11_ReadByte(void)
+{
+  uint8_t dat = 0;
+  for (uint8_t i = 1; i <= 8; i++)
+  {
+    dat <<= 1;
+		dat |= DHT11_Readbit();
+  }
+  return dat;
+}
+
+/**
+  * @brief  DHT11读取40bit 全部数据
+  * @param  None
+  * @retval None
+  * @note   8bit 湿度整数 + 8bit 湿度小数 + 8bit 温度整数 + 8bit 温度小数 + 8bit 校验和
+*/
+static uint8_t DHT11_Read_TempAndHumidity(DHT11_Data_TypeDef *DHT11_Data)
+{  
+	DHT11_Reset();
+  if(DHT11_Check() == 0)
+	{
+		DHT11_Data->humi_int = DHT11_ReadByte();
+		DHT11_Data->humi_deci = DHT11_ReadByte();
+		DHT11_Data->temp_int = DHT11_ReadByte();
+		DHT11_Data->temp_deci = DHT11_ReadByte();
+		DHT11_Data->check_sum = DHT11_ReadByte();
+#ifdef DEBUG_printf
+	printf("tem:%d  hum:%d\n", DHT11_Data->temp_int, DHT11_Data->humi_int);
+#endif
+		if(DHT11_Data->check_sum == DHT11_Data->humi_int + DHT11_Data->humi_deci + DHT11_Data->temp_int + DHT11_Data->temp_deci)
+		return 0;
+  }else{
+    return 1;
+  }
+	return 1;
+}
+

module_Template/DHT11/DHT11.h

@@ -0,0 +1,25 @@
+#ifndef __DHT11_AS_H
+#define __DHT11_AS_H
+
+#include "main.h"
+//#include <stdio.h>
+
+typedef struct
+{
+	uint8_t  humi_int;		//湿度的整数部分
+	uint8_t  humi_deci;	 	//湿度的小数部分
+	uint8_t  temp_int;	 	//温度的整数部分
+	uint8_t  temp_deci;	 	//温度的小数部分
+	uint8_t  check_sum;	 	//校验和                 
+} DHT11_Data_TypeDef;
+
+extern DHT11_Data_TypeDef DHT11Data;
+
+typedef struct {
+	void (* Init)(void);
+	uint8_t (* Read)(DHT11_Data_TypeDef *DHT11_Data);
+} DHT11ClassStruct;
+
+extern DHT11ClassStruct DHT11Class;
+
+#endif

module_Template/DHT11/README.txt

@@ -0,0 +1 @@
+单总线读取DHT11,40bit数据

module_Template/DS1302/DS1302.c

@@ -0,0 +1,190 @@
+#include "ds1302.h"
+
+static void DS1302_WriteByte(uint8_t addr,uint8_t data);
+static uint8_t DS1302_ReadByte(uint8_t addr);
+
+static void DS1302_Init(void);
+static void DS1302_SetTime(uint8_t *writeTime);
+static void DS1302_GetTime(DS1302TimeStruct *timeData);
+
+DS1302ClassStruct DS1302Class = {
+	.Init = DS1302_Init,
+	.SetTime = DS1302_SetTime,
+	.GetTime = DS1302_GetTime
+};
+
+/*
+初始时间定义{0x20,0x21,0x11,0x13,0x10,0x10,0x00,0x06};
+初始时间2021年11月13号10点10分00秒 星期六
+*/
+uint8_t time_buf[8] = {0x20};//初始时间
+uint8_t readtime[8] = {0x20};//当前时间
+
+//DS1302引脚定义,可根据实际情况自行修改端口定义
+#define DS1302_CLK_PORT					GPIOA
+#define DS1302_CLK_CLK					RCC_APB2Periph_GPIOA
+#define DS1302_CLK_PIN					GPIO_Pin_4
+
+#define DS1302_DAT_PORT					GPIOA
+#define DS1302_DAT_CLK					RCC_APB2Periph_GPIOA
+#define DS1302_DAT_PIN					GPIO_Pin_5
+
+#define DS1302_RST_PORT					GPIOA
+#define DS1302_RST_CLK					RCC_APB2Periph_GPIOA
+#define DS1302_RST_PIN					GPIO_Pin_6
+
+// Pin0-7设置CRL寄存器 Pin8-15设置CRH寄存器 配置输入输出模式
+#define DS1302_DAT_OutPut_Mode()	{DS1302_DAT_PORT->CRL &= 0xFF0FFFFF;DS1302_DAT_PORT->CRL |= 0x00300000;}
+#define DS1302_DAT_InPut_Mode()		{DS1302_DAT_PORT->CRL &= 0xFF0FFFFF;DS1302_DAT_PORT->CRL |= 0x00400000;}
+
+//DS1302引脚输出输入
+#define DS1302_DAT_IN()  		GPIO_ReadInputDataBit(DS1302_DAT_PORT, DS1302_DAT_PIN)
+#define DS1302_CLK_0 				DS1302_CLK_PORT->BSRR = (uint32_t)DS1302_CLK_PIN<<16 // 置0
+#define DS1302_CLK_1      	DS1302_CLK_PORT->BSRR = (uint32_t)DS1302_CLK_PIN // 置1
+#define DS1302_DAT_0 				DS1302_DAT_PORT->BSRR = (uint32_t)DS1302_DAT_PIN<<16 // 置0
+#define DS1302_DAT_1				DS1302_DAT_PORT->BSRR = (uint32_t)DS1302_DAT_PIN // 置1
+#define DS1302_RST_0 				DS1302_RST_PORT->BSRR = (uint32_t)DS1302_RST_PIN<<16 // 置0
+#define DS1302_RST_1 				DS1302_RST_PORT->BSRR = (uint32_t)DS1302_RST_PIN // 置1
+
+//DS1302地址定义
+#define DS1302_SEC_ADDR           0x80		//秒数据地址
+#define DS1302_MIN_ADDR           0x82		//分数据地址
+#define DS1302_HOUR_ADDR          0x84		//时数据地址
+#define DS1302_DAY_ADDR           0x86		//日数据地址
+#define DS1302_MONTH_ADDR         0x88		//月数据地址
+#define DS1302_WEEK_ADDR          0x8a		//星期数据地址
+#define DS1302_YEAR_ADDR          0x8c		//年数据地址
+#define DS1302_CONTROL_ADDR       0x8e		//控制数据地址
+#define DS1302_CHARGER_ADDR       0x90 		//充电功能地址			 
+#define DS1302_CLKBURST_ADDR      0xbe
+
+//向DS1302写入一字节数据
+static void DS1302_WriteByte(uint8_t addr,uint8_t data) 
+{
+	uint8_t i;
+	DS1302_RST_0; //禁止数据传输 ！！！这条很重要
+	DS1302_CLK_0; //确保写数据前SCLK为低电平
+	DS1302_RST_1;	//启动DS1302总线	
+	DS1302_DAT_OutPut_Mode();
+	addr=addr&0xFE;  //最低位置零，寄存器0位为0时写，为1时读
+	for(i=0;i<8;i++) //写入目标地址：addr
+	{
+		if (addr&0x01) DS1302_DAT_1;
+		else DS1302_DAT_0;
+		DS1302_CLK_1; //时钟上升沿写入数据
+		DS1302_CLK_0;
+		addr=addr>>1;
+	}	
+	for (i=0;i<8;i++) //写入数据：data
+	{
+		if(data&0x01) DS1302_DAT_1;
+		else DS1302_DAT_0;
+		DS1302_CLK_1;    //时钟上升沿写入数据
+		DS1302_CLK_0;
+		data = data >> 1;
+	}
+	DS1302_CLK_1;    // 将时钟电平置于高电平状态 ，处于已知状态
+	DS1302_RST_0;	//停止DS1302总线
+}
+ 
+//从DS1302读出一字节数据
+static uint8_t DS1302_ReadByte(uint8_t addr) 
+{
+	uint8_t i,temp;	
+	DS1302_RST_0; //这条很重要
+	DS1302_CLK_0; //先将SCLK置低电平,确保写数居前SCLK被拉低
+	DS1302_RST_1; //启动DS1302总线
+	DS1302_DAT_OutPut_Mode();
+	//写入目标地址：addr
+	addr=addr|0x01; //最低位置高，寄存器0位为0时写，为1时读
+	for(i=0;i<8;i++) 
+	{
+		if (addr&0x01) DS1302_DAT_1;
+		else DS1302_DAT_0;
+		DS1302_CLK_1; //写数据
+		DS1302_CLK_0;
+		addr = addr >> 1;
+	}	
+	//从DS1302读出数据：temp
+	DS1302_DAT_InPut_Mode();
+	for(i=0;i<8;i++)
+	{
+		temp=temp>>1;
+		if (DS1302_DAT_IN()) temp|=0x80;
+		else temp&=0x7F;
+		DS1302_CLK_1;
+		DS1302_CLK_0;
+	}	
+	DS1302_CLK_1;  //将时钟电平置于已知状态
+	DS1302_RST_0;	//停止DS1302总线
+	return temp;
+}
+/**
+  * @brief  DS1302引脚初始化
+  * @param  None
+  * @retval None
+  * @note   None
+  */
+static void DS1302_Init(void) 
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+	RCC_APB2PeriphClockCmd(DS1302_CLK_CLK | DS1302_DAT_CLK | DS1302_RST_CLK, ENABLE);
+	
+	GPIO_InitStructure.GPIO_Pin=DS1302_CLK_PIN;
+	GPIO_InitStructure.GPIO_Mode=GPIO_Mode_Out_PP;
+	GPIO_InitStructure.GPIO_Speed=GPIO_Speed_50MHz;
+	GPIO_Init(DS1302_CLK_PORT,&GPIO_InitStructure);
+	GPIO_InitStructure.GPIO_Pin=DS1302_RST_PIN;
+	GPIO_Init(DS1302_RST_PORT,&GPIO_InitStructure);
+	GPIO_InitStructure.GPIO_Pin=DS1302_DAT_PIN;
+	GPIO_Init(DS1302_DAT_PORT,&GPIO_InitStructure);
+}
+/**
+  * @brief  写入DS1302时间数据，初始化计时初值
+  * @param  None
+  * @retval None
+  * @note   None
+  */
+static void DS1302_SetTime(uint8_t *writeTime) 
+{
+	DS1302_WriteByte(DS1302_CONTROL_ADDR,0x00);       //关闭写入
+	DS1302_WriteByte(DS1302_SEC_ADDR,0x80);           //暂停时钟 
+	//DS1302_WriteByte(DS1302_CHARGER_ADDR,0xa9);     //涓流充电 
+	DS1302_WriteByte(DS1302_YEAR_ADDR,writeTime[1]);   //年 
+	DS1302_WriteByte(DS1302_MONTH_ADDR,writeTime[2]);  //月 
+	DS1302_WriteByte(DS1302_DAY_ADDR,writeTime[3]);    //日 
+	DS1302_WriteByte(DS1302_HOUR_ADDR,writeTime[4]);   //时 
+	DS1302_WriteByte(DS1302_MIN_ADDR,writeTime[5]);    //分
+	DS1302_WriteByte(DS1302_SEC_ADDR,writeTime[6]);    //秒
+	DS1302_WriteByte(DS1302_WEEK_ADDR,writeTime[7]);	  //周 
+	DS1302_WriteByte(DS1302_CHARGER_ADDR,0xA5);//打开充电功能 选择2K电阻充电方式
+	DS1302_WriteByte(DS1302_CONTROL_ADDR,0x80);//打开写入 
+}
+/**
+  * @brief  获取DS1302时间数据
+  * @param  None
+  * @retval None
+  * @note   None
+  */
+static void DS1302_GetTime(DS1302TimeStruct *timeData)
+{ 
+	uint8_t readtime[8] = {0x20};//当前时间
+  readtime[1]=DS1302_ReadByte(DS1302_YEAR_ADDR);          //年 
+	readtime[2]=DS1302_ReadByte(DS1302_MONTH_ADDR);         //月 
+	readtime[3]=DS1302_ReadByte(DS1302_DAY_ADDR);           //日 
+	readtime[4]=DS1302_ReadByte(DS1302_HOUR_ADDR);          //时 
+	readtime[5]=DS1302_ReadByte(DS1302_MIN_ADDR);           //分 
+	readtime[6]=(DS1302_ReadByte(DS1302_SEC_ADDR))&0x7f;    //秒，屏蔽秒的第7位，避免超出59
+	readtime[7]=DS1302_ReadByte(DS1302_WEEK_ADDR);          //周 	
+	timeData->year=(readtime[0]>>4)*1000+(readtime[0]&0x0F)*100+(readtime[1]>>4)*10+(readtime[1]&0x0F); //计算年份
+	timeData->month=(readtime[2]>>4)*10+(readtime[2]&0x0F);  //计算月份
+	timeData->day=(readtime[3]>>4)*10+(readtime[3]&0x0F);    //计算日期
+	timeData->hour=(readtime[4]>>4)*10+(readtime[4]&0x0F);   //计算小时
+	timeData->minute=(readtime[5]>>4)*10+(readtime[5]&0x0F); //计算分钟
+	timeData->second=(readtime[6]>>4)*10+(readtime[6]&0x0F); //计算秒钟
+	timeData->week=(readtime[7]&0x0F);                       //计算星期		
+#ifdef DEBUG_printf
+	//printf("read: %d年%d月%d日 %d时%d分%d秒\n", timeData->year, timeData->month, timeData->day, timeData->hour, timeData->minute, timeData->second);	
+#endif
+}
+

module_Template/DS1302/DS1302.h

@@ -0,0 +1,28 @@
+#ifndef __DS1302_H
+#define __DS1302_H
+
+#include "main.h"
+
+// ʱ¼ä½á¹¹Ìå
+typedef struct {
+	uint16_t year;
+	uint8_t  month;
+	uint8_t  day;
+	uint8_t  hour;
+	uint8_t  minute;
+	uint8_t  second;
+	uint8_t  week;
+} DS1302TimeStruct;
+
+typedef struct {
+	void (* Init)(void);
+	void (* SetTime)(uint8_t *writeTime);
+	void (* GetTime)(DS1302TimeStruct *timeData);
+} DS1302ClassStruct;
+
+extern DS1302ClassStruct DS1302Class;
+
+
+ 
+#endif
+

module_Template/DS1302/README.txt

@@ -0,0 +1 @@
+DS1302时钟芯片

module_Template/DS18B20/DS18B20.c

@@ -0,0 +1,380 @@
+/* include ---------------------------------------------------------*/
+#include "main.h"
+
+
+/* private define -------------------------------------------------*/
+#define	DS18B20_DQ_SCK_APBxClock_FUN			RCC_APB2PeriphClockCmd
+#define	DS18B20_DQ_GPIO_CLK						RCC_APB2Periph_GPIOA
+
+#define	DS18B20_DQ_GPIO_PORT					GPIOA
+#define	DS18B20_DQ_GPIO_PIN						GPIO_Pin_7
+
+#define	DS18B20_DQ_0							GPIO_ResetBits(DS18B20_DQ_GPIO_PORT,DS18B20_DQ_GPIO_PIN )
+#define	DS18B20_DQ_1							GPIO_SetBits(DS18B20_DQ_GPIO_PORT,DS18B20_DQ_GPIO_PIN )
+#define	DS18B20_DQ_IN()							GPIO_ReadInputDataBit( DS18B20_DQ_GPIO_PORT,DS18B20_DQ_GPIO_PIN)
+
+/* private variables ----------------------------------------------*/
+
+
+/* private function prototypes ------------------------------------*/
+static void DS18B20_Mode_IPU(void);
+static void DS18B20_Mode_Out_PP(void);
+static void DS18B20_Rst(void);
+static uint8_t DS18B20_Presence(void);
+static uint8_t DS18B20_ReadBit(void);
+static uint8_t DS18B20_ReadByte(void);
+static void DS18B20_WriteByte(uint8_t dat);
+static void DS18B20_SkipRom(void);
+static void DS18B20_MatchRom(void);
+
+static uint8_t Init(void);
+static void ReadId(uint8_t * ds18b20_id);
+static float GetTemp_SkipRom(void);
+static float GetTemp_MatchRom( uint8_t * ds18b20_id );
+
+/* public variables -----------------------------------------------*/
+DS18B20_t  DS18B20 = 
+{
+	Init,
+	ReadId,
+	GetTemp_SkipRom,
+	GetTemp_MatchRom
+};
+
+/**
+  * @brief  初始化
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static uint8_t Init(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+
+	DS18B20_DQ_SCK_APBxClock_FUN ( DS18B20_DQ_GPIO_CLK, ENABLE);
+														   
+  	GPIO_InitStructure.GPIO_Pin = DS18B20_DQ_GPIO_PIN;
+  	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+  	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+
+  	GPIO_Init ( DS18B20_DQ_GPIO_PORT , &GPIO_InitStructure );
+
+	DS18B20_DQ_1;
+	
+	DS18B20_Rst();
+	
+	return DS18B20_Presence ();
+}
+/**
+  * @brief  使DS18B20-DATA引脚变为输入模式
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DS18B20_Mode_IPU(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+
+	GPIO_InitStructure.GPIO_Pin = DS18B20_DQ_GPIO_PIN;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;	
+
+	GPIO_Init(DS18B20_DQ_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+  * @brief  使DS18B20-DATA引脚变为输出模式
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DS18B20_Mode_Out_PP(void)
+{
+ 	GPIO_InitTypeDef GPIO_InitStructure;
+															   
+  	GPIO_InitStructure.GPIO_Pin = DS18B20_DQ_GPIO_PIN;	
+  	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;     
+  	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+
+  	GPIO_Init(DS18B20_DQ_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+  * @brief  主机给从机发送复位脉冲
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DS18B20_Rst(void)
+{
+	/* 主机设置为推挽输出 */
+	DS18B20_Mode_Out_PP();
+	
+	DS18B20_DQ_0;
+	/* 主机至少产生480us的低电平复位信号 */
+	DelayClass.DelayUs(750);
+	
+	/* 主机在产生复位信号后，需将总线拉高 */
+	DS18B20_DQ_1;
+	
+	/*从机接收到主机的复位信号后，会在15~60us后给主机发一个存在脉冲*/
+	DelayClass.DelayUs(15);
+}
+/**
+  * @brief  检测从机给主机返回的存在脉冲
+  * @param  None
+  * @retval 0 成功 1 失败
+  * @note   None
+*/
+static uint8_t DS18B20_Presence(void)
+{
+	uint8_t pulse_time = 0;
+	
+	/* 主机设置为上拉输入 */
+	DS18B20_Mode_IPU();
+	
+	/* 等待存在脉冲的到来，存在脉冲为一个60~240us的低电平信号 
+	 * 如果存在脉冲没有来则做超时处理，从机接收到主机的复位信号后，会在15~60us后给主机发一个存在脉冲
+	 */
+	while( DS18B20_DQ_IN() && pulse_time<100 )
+	{
+		pulse_time++;
+		DelayClass.DelayUs(1);
+	}	
+	/* 经过100us后，存在脉冲都还没有到来*/
+	if( pulse_time >=100 )
+		return 1;
+	else
+		pulse_time = 0;
+	
+	/* 存在脉冲到来，且存在的时间不能超过240us */
+	while( !DS18B20_DQ_IN() && pulse_time<240 )
+	{
+		pulse_time++;
+		DelayClass.DelayUs(1);
+	}	
+	if( pulse_time >=240 )
+		return 1;
+	else
+		return 0;
+}
+
+/**
+  * @brief  从DS18B20读取一个bit
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static uint8_t DS18B20_ReadBit(void)
+{
+	uint8_t dat;
+	
+	/* 读0和读1的时间至少要大于60us */	
+	DS18B20_Mode_Out_PP();
+	/* 读时间的起始：必须由主机产生 >1us <15us 的低电平信号 */
+	DS18B20_DQ_0;
+	DelayClass.DelayUs(10);
+	/* 设置成输入，释放总线，由外部上拉电阻将总线拉高 */
+	DS18B20_Mode_IPU();
+	if( DS18B20_DQ_IN() == SET )
+	{
+		dat = 1;
+	}
+	else
+	{
+		dat = 0;
+	}
+	/* 这个延时参数请参考时序图 */
+	DelayClass.DelayUs(45);
+	
+	return dat;
+}
+
+/**
+  * @brief  从DS18B20读一个字节，低位先行
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static uint8_t DS18B20_ReadByte(void)
+{
+	uint8_t i, j, dat = 0;	
+	
+	for(i=0; i<8; i++) 
+	{
+		j = DS18B20_ReadBit();		
+		dat = (dat) | (j<<i);
+	}
+	
+	return dat;
+}
+/**
+  * @brief  写一个字节到DS18B20，低位先行
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DS18B20_WriteByte(uint8_t dat)
+{
+	uint8_t i, testb;
+	DS18B20_Mode_Out_PP();
+	
+	for( i=0; i<8; i++ )
+	{
+		testb = dat&0x01;
+		dat = dat>>1;		
+		/* 写0和写1的时间至少要大于60us */
+		if (testb)
+		{
+			DS18B20_DQ_0;
+			/* 1us < 这个延时 < 15us */
+			DelayClass.DelayUs(8);
+			
+			DS18B20_DQ_1;
+			DelayClass.DelayUs(58);
+			
+		}		
+		else
+		{
+			DS18B20_DQ_0;
+			/* 60us < Tx 0 < 120us */
+			DelayClass.DelayUs(70);
+			
+			DS18B20_DQ_1;			
+			/* 1us < Trec(恢复时间) < 无穷大*/
+			DelayClass.DelayUs(2);
+		}
+	}
+}
+
+/**
+  * @brief  跳过匹配 DS18B20 ROM
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DS18B20_SkipRom(void)
+{
+	DS18B20_Rst();	   
+	
+	DS18B20_Presence();	 
+	
+	DS18B20_WriteByte(0XCC);/* 跳过 ROM */
+	
+}
+
+/**
+  * @brief  执行匹配 DS18B20 ROM
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static void DS18B20_MatchRom(void)
+{
+	DS18B20_Rst();	   
+	
+	DS18B20_Presence();	 
+	
+	DS18B20_WriteByte(0X55);		/* 匹配 ROM */
+	
+}
+/**
+  * @brief  在跳过匹配 ROM 情况下获取 DS18B20 温度值 
+  * @param  None
+  * @retval None
+  * @note   None
+*/
+static float GetTemp_SkipRom(void)
+{
+	uint8_t tpmsb, tplsb;
+	short s_tem;
+	float f_tem;
+	
+	DS18B20_SkipRom ();
+	DS18B20_WriteByte(0X44);				/* 开始转换 */
+	
+	DS18B20_SkipRom ();
+	DS18B20_WriteByte(0XBE);				/* 读温度值 */
+	
+	tplsb = DS18B20_ReadByte();		 
+	tpmsb = DS18B20_ReadByte(); 
+	
+	s_tem = tpmsb<<8;
+	s_tem = s_tem | tplsb;
+	
+	if( s_tem < 0 )		/* 负温度 */
+	{
+		f_tem = (~s_tem+1) * 0.0625;
+	}	
+	else
+	{
+		f_tem = s_tem * 0.0625;
+	}
+	return f_tem;
+}
+
+/**
+  * @brief  在匹配 ROM 情况下获取 DS18B20 ID
+  * @param  ds18b20_id 用于存放 DS18B20 序列号的数组的首地址
+  * @retval None 
+  * @note   None
+*/
+static void ReadId(uint8_t * ds18b20_id)
+{
+	uint8_t uc;
+	
+	DS18B20_WriteByte(0x33);       //读取序列号
+
+	for ( uc = 0; uc < 8; uc ++ )
+	{
+		ds18b20_id [ uc ] = DS18B20_ReadByte();
+	}
+}
+
+/**
+  * @brief  在匹配 ROM 情况下获取 DS18B20 温度值
+  * @param  ds18b20_id 存放 DS18B20 序列号的数组的首地址
+  * @retval None
+  * @note   None
+*/
+static float GetTemp_MatchRom( uint8_t * ds18b20_id )
+{
+	uint8_t tpmsb, tplsb, i;
+	short s_tem;
+	float f_tem;
+	
+	DS18B20_MatchRom ();            //匹配ROM
+	
+	for(i=0;i<8;i++)
+	{
+		DS18B20_WriteByte ( ds18b20_id [i]);	
+	}
+	
+	DS18B20_WriteByte(0X44);				/* 开始转换 */
+
+	DS18B20_MatchRom ();            //匹配ROM
+	
+	for(i=0;i<8;i++)
+	{
+		DS18B20_WriteByte (ds18b20_id [i]);	
+	}
+	
+	DS18B20_WriteByte(0XBE);				/* 读温度值 */
+	
+	tplsb = DS18B20_ReadByte();		 
+	tpmsb = DS18B20_ReadByte(); 
+	
+	
+	s_tem = tpmsb<<8;
+	s_tem = s_tem | tplsb;
+	
+	if( s_tem < 0 )		/* 负温度 */
+	{
+		f_tem = (~s_tem+1) * 0.0625;	
+	}
+	else
+	{
+		f_tem = s_tem * 0.0625;
+	}
+	return f_tem; 	
+
+}

module_Template/DS18B20/DS18B20.h

@@ -0,0 +1,23 @@
+#ifndef __Ds18b20_H_
+#define __Ds18b20_H_
+
+#include "main.h"
+
+typedef struct
+{
+	uint8_t (*Init)(void);
+	void (*ReadID)(uint8_t*);
+	float (*GetTemp_SkipRom)(void);
+	float (*GetTemp_MatchRom)(uint8_t*);
+}DS18B20_t;
+
+
+/* extern variables ------------------------------------------------*/
+extern DS18B20_t  DS18B20;
+
+/* extern function prototypes --------------------------------------*/
+
+
+
+#endif
+

module_Template/DS18B20/README.txt

@@ -0,0 +1 @@
+DS18B20温度传感器

module_Template/MG90S/MG90S.c

@@ -0,0 +1,58 @@
+#include "main.h"
+
+static void TIM3_Init(u16 arr,u16 psc);
+static void setMG90S_close(void);
+static void setMG90S_open(void);
+
+MG90SClassStruct MG90SClass = {
+	TIM3_Init,
+	setMG90S_open,
+	setMG90S_close
+};
+
+// PWM初始化
+static void TIM3_Init(u16 arr,u16 psc)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;
+	TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
+	TIM_OCInitTypeDef  TIM_OCInitStructure;
+
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE); //时钟使能
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE);  //使能GPIO外设时钟使能
+	
+	//设置该引脚为复用输出功能,输出TIM3 CH1的PWM脉冲波形
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6; //TIM3_CH1
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;  //复用推挽输出
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(GPIOA, &GPIO_InitStructure);
+	
+	//定时器TIM3初始化
+	TIM_TimeBaseStructure.TIM_Period = arr; //设置在下一个更新事件装入活动的自动重装载寄存器周期的值	
+	TIM_TimeBaseStructure.TIM_Prescaler =psc; //设置用来作为TIMx时钟频率除数的预分频值
+	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; //设置时钟分割:TDTS = Tck_tim
+	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  //TIM向上计数模式
+	TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure); //根据指定的参数初始化TIMx的时间基数单位
+ 
+	TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM2; //选择定时器模式:TIM脉冲宽度调制模式2
+  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; //比较输出使能
+  TIM_OCInitStructure.TIM_Pulse = 0; //设置待装入捕获比较寄存器的脉冲值
+  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High; //输出极性:TIM输出比较极性高
+  TIM_OC1Init(TIM3, &TIM_OCInitStructure);  //根据TIM_OCInitStruct中指定的参数初始化外设TIMx
+	
+  TIM_OC1PreloadConfig(TIM3, TIM_OCPreload_Enable);  	//CH1预装载使能    
+  TIM_ARRPreloadConfig(TIM3, ENABLE); //使能TIMx在ARR上的预装载寄存器
+  TIM_Cmd(TIM3, ENABLE);  //使能TIMx
+	TIM_CtrlPWMOutputs(TIM3,ENABLE);  //MOE 主输出使能				 
+}
+// 关闭
+static void setMG90S_close(void)
+{
+	TIM_SetCompare1(TIM3, 970);
+	AllFlag.MG90S_ONOFF_flag = 0;
+}
+// 开启
+static void setMG90S_open(void)
+{
+	TIM_SetCompare1(TIM3, 900);
+	AllFlag.MG90S_ONOFF_flag = 1;
+}

module_Template/MG90S/MG90S.h

@@ -0,0 +1,14 @@
+#ifndef __MG90S_H
+#define __MG90S_H
+
+#include "main.h"
+
+typedef struct {
+	void (* Init)(u16 arr,u16 psc);
+	void (* Open)(void);
+	void (* Close)(void);
+} MG90SClassStruct;
+
+extern MG90SClassStruct MG90SClass;
+
+#endif

module_Template/MultiButton/BUTTON.c

@@ -0,0 +1,103 @@
+#include "main.h"
+#include "MultiButton.h"
+
+static void KEY_GPIO_Config(void);
+static uint8_t read_key1_pin(void);
+static uint8_t read_key2_pin(void);
+static void key1_shortPress_handle(void *btn);
+static void key2_shortPress_handle(void *btn);
+static void key1_longPress_handle(void *btn);
+static void key2_longPress_handle(void *btn);
+	
+static void KEY_Init(void);
+static void KEY_Scan(void);
+
+KEYClassStruct KEYClass = {
+	.Init = KEY_Init,
+	.Scan = KEY_Scan,
+	.Read_key1 = read_key1_pin,
+	.Read_key2 = read_key2_pin
+};
+
+// 按键结构体
+struct Button key1;
+struct Button key2;
+
+#define KEY1_PORT_CLK		(RCC_APB2Periph_GPIOB)
+#define KEY1_PORT				GPIOB
+#define KEY1_PIN				GPIO_Pin_6
+#define KEY2_PORT_CLK		(RCC_APB2Periph_GPIOB)
+#define KEY2_PORT				GPIOB
+#define KEY2_PIN				GPIO_Pin_7
+
+static void KEY_GPIO_Config(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+  /*开启按键GPIO口的时钟*/
+  RCC_APB2PeriphClockCmd(KEY1_PORT_CLK | KEY2_PORT_CLK,ENABLE);
+  /*初始化GPIO*/
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
+  GPIO_InitStructure.GPIO_Pin = KEY1_PIN;
+  GPIO_Init(KEY1_PORT,&GPIO_InitStructure);
+	GPIO_InitStructure.GPIO_Pin = KEY2_PIN;
+  GPIO_Init(KEY2_PORT,&GPIO_InitStructure);
+}
+
+static uint8_t read_key1_pin(void)
+{
+	return GPIO_ReadInputDataBit(KEY1_PORT, KEY1_PIN);
+}
+static uint8_t read_key2_pin(void)
+{
+	return GPIO_ReadInputDataBit(KEY2_PORT, KEY2_PIN);
+}
+// key1短按切换页面
+static void key1_shortPress_handle(void *btn)
+{
+
+	#ifdef DEBUG_printf
+		printf("key1 short press\n");
+	#endif
+}
+// key2短按切换选项																																																																																																																																																																																																																																									·················
+static void key2_shortPress_handle(void *btn)
+{
+	#ifdef DEBUG_printf
+		printf("key2 short press\n");
+	#endif
+}
+// key1长按
+static void key1_longPress_handle(void *btn)
+{
+
+	#ifdef DEBUG_printf
+		printf("key1 long press\n");
+	#endif
+}
+// key2长按
+static void key2_longPress_handle(void *btn)
+{
+
+	#ifdef DEBUG_printf
+		printf("key2 long press\n");
+	#endif
+}
+
+static void KEY_Init(void)
+{
+	KEY_GPIO_Config();
+	button_init(&key1, read_key1_pin, 0);
+	button_init(&key2, read_key2_pin, 0);
+	button_attach(&key1, SINGLE_CLICK, key1_shortPress_handle);
+	button_attach(&key2, SINGLE_CLICK, key2_shortPress_handle);
+	button_attach(&key1, LONG_PRESS_START, key1_longPress_handle);
+	button_attach(&key2, LONG_PRESS_START, key2_longPress_handle);
+	button_start(&key1);
+	button_start(&key2);
+}
+
+static void KEY_Scan(void)
+{
+	button_ticks();
+}
+

module_Template/MultiButton/BUTTON.h

@@ -0,0 +1,15 @@
+#ifndef __BUTTON_AS_H
+#define __BUTTON_AS_H	 
+
+#include "main.h" 	   
+
+typedef struct {
+	void (* Init)(void);
+	void (* Scan)(void);
+	uint8_t (* Read_key1)(void);
+	uint8_t (* Read_key2)(void);
+} KEYClassStruct;
+
+extern KEYClassStruct KEYClass;
+
+#endif

module_Template/MultiButton/MultiButton.c

@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2016 Zibin Zheng <znbin@qq.com>
+ * All rights reserved
+ */
+
+#include "MultiButton.h"
+
+#define EVENT_CB(ev)   if(handle->cb[ev])handle->cb[ev]((Button*)handle)
+
+//button handle list head.
+static struct Button* head_handle = NULL;
+
+/**
+  * @brief  Initializes the button struct handle.
+  * @param  handle: the button handle strcut.
+  * @param  pin_level: read the HAL GPIO of the connet button level.
+  * @param  active_level: pressed GPIO level.
+  * @retval None
+  */
+void button_init(struct Button* handle, uint8_t(*pin_level)(), uint8_t active_level)
+{
+	memset(handle, 0, sizeof(struct Button));
+	handle->event = (uint8_t)NONE_PRESS;
+	handle->hal_button_Level = pin_level;
+	handle->button_level = handle->hal_button_Level();
+	handle->active_level = active_level;
+}
+
+/**
+  * @brief  Attach the button event callback function.
+  * @param  handle: the button handle strcut.
+  * @param  event: trigger event type.
+  * @param  cb: callback function.
+  * @retval None
+  */
+void button_attach(struct Button* handle, PressEvent event, BtnCallback cb)
+{
+	handle->cb[event] = cb;
+}
+
+/**
+  * @brief  Inquire the button event happen.
+  * @param  handle: the button handle strcut.
+  * @retval button event.
+  */
+PressEvent get_button_event(struct Button* handle)
+{
+	return (PressEvent)(handle->event);
+}
+
+/**
+  * @brief  Button driver core function, driver state machine.
+  * @param  handle: the button handle strcut.
+  * @retval None
+  */
+void button_handler(struct Button* handle)
+{
+	uint8_t read_gpio_level = handle->hal_button_Level();
+
+	//ticks counter working..
+	if((handle->state) > 0) handle->ticks++;
+
+	/*------------button debounce handle---------------*/
+	if(read_gpio_level != handle->button_level) { //not equal to prev one
+		//continue read 3 times same new level change
+		if(++(handle->debounce_cnt) >= DEBOUNCE_TICKS) {
+			handle->button_level = read_gpio_level;
+			handle->debounce_cnt = 0;
+		}
+	} else { //leved not change ,counter reset.
+		handle->debounce_cnt = 0;
+	}
+
+	/*-----------------State machine-------------------*/
+	switch (handle->state) {
+	case 0:
+		if(handle->button_level == handle->active_level) {	//start press down
+			handle->event = (uint8_t)PRESS_DOWN;
+			EVENT_CB(PRESS_DOWN);
+			handle->ticks = 0;
+			handle->repeat = 1;
+			handle->state = 1;
+		} else {
+			handle->event = (uint8_t)NONE_PRESS;
+		}
+		break;
+
+	case 1:
+		if(handle->button_level != handle->active_level) { //released press up
+			handle->event = (uint8_t)PRESS_UP;
+			EVENT_CB(PRESS_UP);
+			handle->ticks = 0;
+			handle->state = 2;
+
+		} else if(handle->ticks > LONG_TICKS) {
+			handle->event = (uint8_t)LONG_PRESS_START;
+			EVENT_CB(LONG_PRESS_START);
+			handle->state = 5;
+		}
+		break;
+
+	case 2:
+		if(handle->button_level == handle->active_level) { //press down again
+			handle->event = (uint8_t)PRESS_DOWN;
+			EVENT_CB(PRESS_DOWN);
+			handle->repeat++;
+			EVENT_CB(PRESS_REPEAT); // repeat hit
+			handle->ticks = 0;
+			handle->state = 3;
+		} else if(handle->ticks > SHORT_TICKS) { //released timeout
+			if(handle->repeat == 1) {
+				handle->event = (uint8_t)SINGLE_CLICK;
+				EVENT_CB(SINGLE_CLICK);
+			} else if(handle->repeat == 2) {
+				handle->event = (uint8_t)DOUBLE_CLICK;
+				EVENT_CB(DOUBLE_CLICK); // repeat hit
+			}
+			handle->state = 0;
+		}
+		break;
+
+	case 3:
+		if(handle->button_level != handle->active_level) { //released press up
+			handle->event = (uint8_t)PRESS_UP;
+			EVENT_CB(PRESS_UP);
+			if(handle->ticks < SHORT_TICKS) {
+				handle->ticks = 0;
+				handle->state = 2; //repeat press
+			} else {
+				handle->state = 0;
+			}
+		}else if(handle->ticks > SHORT_TICKS){ // long press up
+			handle->state = 0;
+		}
+		break;
+
+	case 5:
+		if(handle->button_level == handle->active_level) {
+			//continue hold trigger
+			handle->event = (uint8_t)LONG_PRESS_HOLD;
+			EVENT_CB(LONG_PRESS_HOLD);
+
+		} else { //releasd
+			handle->event = (uint8_t)PRESS_UP;
+			EVENT_CB(PRESS_UP);
+			handle->state = 0; //reset
+		}
+		break;
+	}
+}
+
+/**
+  * @brief  Start the button work, add the handle into work list.
+  * @param  handle: target handle strcut.
+  * @retval 0: succeed. -1: already exist.
+  */
+int button_start(struct Button* handle)
+{
+	struct Button* target = head_handle;
+	while(target) {
+		if(target == handle) return -1;	//already exist.
+		target = target->next;
+	}
+	handle->next = head_handle;
+	head_handle = handle;
+	return 0;
+}
+
+/**
+  * @brief  Stop the button work, remove the handle off work list.
+  * @param  handle: target handle strcut.
+  * @retval None
+  */
+void button_stop(struct Button* handle)
+{
+	struct Button** curr;
+	for(curr = &head_handle; *curr; ) {
+		struct Button* entry = *curr;
+		if (entry == handle) {
+			*curr = entry->next;
+//			free(entry);
+			return;//glacier add 2021-8-18
+		} else
+			curr = &entry->next;
+	}
+}
+
+/**
+  * @brief  background ticks, timer repeat invoking interval 5ms.
+  * @param  None.
+  * @retval None
+  */
+void button_ticks()
+{
+	struct Button* target;
+	for(target=head_handle; target; target=target->next) {
+		button_handler(target);
+	}
+}
+

module_Template/MultiButton/MultiButton.h

@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2016 Zibin Zheng <znbin@qq.com>
+ * All rights reserved
+ */
+
+#ifndef _MULTI_BUTTON_H_
+#define _MULTI_BUTTON_H_
+
+#include "stdint.h"
+#include "string.h"
+
+//According to your need to modify the constants.
+#define TICKS_INTERVAL    5	//ms
+#define DEBOUNCE_TICKS    3	//MAX 8
+#define SHORT_TICKS       (300 /TICKS_INTERVAL)
+#define LONG_TICKS        (1000 /TICKS_INTERVAL)
+
+
+typedef void (*BtnCallback)(void*);
+
+typedef enum {
+	PRESS_DOWN = 0,
+	PRESS_UP,
+	PRESS_REPEAT,
+	SINGLE_CLICK,
+	DOUBLE_CLICK,
+	LONG_PRESS_START,
+	LONG_PRESS_HOLD,
+	number_of_event,
+	NONE_PRESS
+}PressEvent;
+
+typedef struct Button {
+	uint16_t ticks;
+	uint8_t  repeat : 4;
+	uint8_t  event : 4;
+	uint8_t  state : 3;
+	uint8_t  debounce_cnt : 3;
+	uint8_t  active_level : 1;
+	uint8_t  button_level : 1;
+	uint8_t  (*hal_button_Level)(void);
+	BtnCallback  cb[number_of_event];
+	struct Button* next;
+}Button;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void button_init(struct Button* handle, uint8_t(*pin_level)(), uint8_t active_level);
+void button_attach(struct Button* handle, PressEvent event, BtnCallback cb);
+PressEvent get_button_event(struct Button* handle);
+int  button_start(struct Button* handle);
+void button_stop(struct Button* handle);
+void button_ticks(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

module_Template/MultiButton/MultiButtonTips.md

@@ -0,0 +1,120 @@
+# MultiButton
+
+## 简介
+MultiButton 是一个小巧简单易用的事件驱动型按键驱动模块，可无限量扩展按键，按键事件的回调异步处理方式可以简化你的程序结构，去除冗余的按键处理硬编码，让你的按键业务逻辑更清晰。
+
+## 使用方法
+1.先申请一个按键结构
+
+```c
+struct Button button1;
+```
+2.初始化按键对象，绑定按键的GPIO电平读取接口**read_button_pin()** ，后一个参数设置有效触发电平
+
+```c
+button_init(&button1, read_button_pin, 0);
+```
+3.注册按键事件
+
+```c
+button_attach(&button1, SINGLE_CLICK, Callback_SINGLE_CLICK_Handler);
+button_attach(&button1, DOUBLE_CLICK, Callback_DOUBLE_Click_Handler);
+...
+```
+4.启动按键
+
+```c
+button_start(&button1);
+```
+5.设置一个5ms间隔的定时器循环调用后台处理函数
+
+```c
+while(1) {
+    ...
+    if(timer_ticks == 5) {
+        timer_ticks = 0;
+
+        button_ticks();
+    }
+}
+```
+
+## 特性
+
+MultiButton 使用C语言实现，基于面向对象方式设计思路，每个按键对象单独用一份数据结构管理：
+
+```c
+struct Button {
+	uint16_t ticks;
+	uint8_t  repeat: 4;
+	uint8_t  event : 4;
+	uint8_t  state : 3;
+	uint8_t  debounce_cnt : 3;
+	uint8_t  active_level : 1;
+	uint8_t  button_level : 1;
+	uint8_t  (*hal_button_Level)(void);
+	BtnCallback  cb[number_of_event];
+	struct Button* next;
+};
+```
+这样每个按键使用单向链表相连，依次进入 button_handler(struct Button* handle) 状态机处理，所以每个按键的状态彼此独立。
+
+
+## 按键事件
+
+事件 | 说明
+---|---
+PRESS_DOWN | 按键按下，每次按下都触发
+PRESS_UP | 按键弹起，每次松开都触发
+PRESS_REPEAT | 重复按下触发，变量repeat计数连击次数
+SINGLE_CLICK | 单击按键事件
+DOUBLE_CLICK | 双击按键事件
+LONG_PRESS_START | 达到长按时间阈值时触发一次
+LONG_PRESS_HOLD | 长按期间一直触发
+
+
+## Examples
+
+```c
+#include "button.h"
+
+struct Button btn1;
+
+uint8_t read_button1_GPIO()
+{
+	return HAL_GPIO_ReadPin(B1_GPIO_Port, B1_Pin);
+}
+void BTN1_PRESS_DOWN_Handler(void* btn)
+{
+	//do something...
+}
+
+void BTN1_PRESS_UP_Handler(void* btn)
+{
+	//do something...
+}
+
+...
+
+int main()
+{
+	button_init(&btn1, read_button1_GPIO, 0);
+	button_attach(&btn1, PRESS_DOWN,       BTN1_PRESS_DOWN_Handler);
+	button_attach(&btn1, PRESS_UP,         BTN1_PRESS_UP_Handler);
+	button_attach(&btn1, PRESS_REPEAT,     BTN1_PRESS_REPEAT_Handler);
+	button_attach(&btn1, SINGLE_CLICK,     BTN1_SINGLE_Click_Handler);
+	button_attach(&btn1, DOUBLE_CLICK,     BTN1_DOUBLE_Click_Handler);
+	button_attach(&btn1, LONG_PRESS_START, BTN1_LONG_PRESS_START_Handler);
+	button_attach(&btn2, LONG_PRESS_HOLD,  BTN1_LONG_PRESS_HOLD_Handler);
+	button_start(&btn1);
+
+	//make the timer invoking the button_ticks() interval 5ms.
+	//This function is implemented by yourself.
+	__timer_start(button_ticks, 0, 5);
+
+	while(1)
+	{}
+}
+```
+
+

module_Template/OLED0.96/OLED.c

@@ -0,0 +1,349 @@
+#include "main.h"
+//#include <stdlib.h>
+#include "OLEDFont.h"  	 
+//#include "delay.h"
+//OLED的显存
+//存放格式如下.
+//[0]0 1 2 3 ... 127	
+//[1]0 1 2 3 ... 127	
+//[2]0 1 2 3 ... 127	
+//[3]0 1 2 3 ... 127	
+//[4]0 1 2 3 ... 127	
+//[5]0 1 2 3 ... 127	
+//[6]0 1 2 3 ... 127	
+//[7]0 1 2 3 ... 127 			   
+/**********************************************
+//IIC Start
+**********************************************/
+void IIC_Start(void)
+{
+	OLED_SCLK_Set();
+	OLED_SDIN_Set();
+	OLED_SDIN_Clr();
+	OLED_SCLK_Clr();
+}
+/**********************************************
+//IIC Stop
+**********************************************/
+void IIC_Stop(void)
+{
+	OLED_SCLK_Set();
+//	OLED_SCLK_Clr();
+	OLED_SDIN_Clr();
+	OLED_SDIN_Set();
+}
+
+void IIC_Wait_Ack(void)
+{
+	/*
+	GPIOB->CRH &= 0XFFF0FFFF;	//设置PB12为上拉输入模式
+	GPIOB->CRH |= 0x00080000;
+	OLED_SDA = 1;
+	delay_us(1);
+	OLED_SCL = 1;
+	delay_us(50000);
+	while(1)
+	{
+		if(!OLED_SDA)				//判断是否接收到OLED 应答信号
+		{
+			//GPIOB->CRH &= 0XFFF0FFFF;	//设置PB12为通用推免输出模式
+			//GPIOB->CRH |= 0x00030000;
+			return;
+		}
+	}
+*/
+	OLED_SCLK_Set() ;
+	OLED_SCLK_Clr();
+}
+/**********************************************
+// IIC Write byte
+**********************************************/
+void Write_IIC_Byte(unsigned char IIC_Byte)
+{
+	unsigned char i;
+	unsigned char m,da;
+	da=IIC_Byte;
+	OLED_SCLK_Clr();
+	for(i=0;i<8;i++)		
+	{
+		m=da;
+		//	OLED_SCLK_Clr();
+		m=m&0x80;
+		if(m==0x80) OLED_SDIN_Set();
+		else OLED_SDIN_Clr();
+		da=da<<1;
+		OLED_SCLK_Set();
+		OLED_SCLK_Clr();
+	}
+}
+/**********************************************
+// IIC Write Command
+**********************************************/
+void Write_IIC_Command(unsigned char IIC_Command)
+{
+	IIC_Start();
+  Write_IIC_Byte(0x78); //Slave address,SA0=0
+	IIC_Wait_Ack();	
+  Write_IIC_Byte(0x00); //write command
+	IIC_Wait_Ack();	
+  Write_IIC_Byte(IIC_Command); 
+	IIC_Wait_Ack();	
+  IIC_Stop();
+}
+/**********************************************
+// IIC Write Data
+**********************************************/
+void Write_IIC_Data(unsigned char IIC_Data)
+{
+	IIC_Start();
+  Write_IIC_Byte(0x78); //D/C#=0; R/W#=0
+	IIC_Wait_Ack();	
+  Write_IIC_Byte(0x40); //write data
+	IIC_Wait_Ack();	
+  Write_IIC_Byte(IIC_Data);
+	IIC_Wait_Ack();	
+  IIC_Stop();
+}
+void OLED_WR_Byte(unsigned dat,unsigned cmd)
+{
+	if(cmd) {
+		Write_IIC_Data(dat);
+  } else {
+		Write_IIC_Command(dat);
+	}
+}
+/********************************************
+// fill_Picture
+********************************************/
+void fill_picture(unsigned char fill_Data)
+{
+	unsigned char m,n;
+	for(m=0;m<8;m++)
+	{
+		OLED_WR_Byte(0xb0+m,0);		//page0-page1
+		OLED_WR_Byte(0x00,0);		//low column start address
+		OLED_WR_Byte(0x10,0);		//high column start address
+		for(n=0;n<128;n++) {
+			OLED_WR_Byte(fill_Data,1);
+		}
+	}
+}
+//坐标设置
+void OLED_Set_Pos(unsigned char x, unsigned char y) 
+{ 	
+	OLED_WR_Byte(0xb0+y,OLED_CMD);
+	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
+	OLED_WR_Byte((x&0x0f),OLED_CMD); 
+}   	  
+//开启OLED显示    
+void OLED_Display_On(void)
+{
+	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
+	OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ON
+	OLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
+}
+//关闭OLED显示     
+void OLED_Display_Off(void)
+{
+	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
+	OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFF
+	OLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
+}		   			 
+//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!	  
+void OLED_Clear(void)  
+{  
+	u8 i,n;		    
+	for(i=0;i<8;i++)  
+	{  
+		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
+		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
+		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
+		for(n=0;n<128;n++) OLED_WR_Byte(0,OLED_DATA); 
+	} //更新显示
+}
+void OLED_On(void)  
+{  
+	u8 i,n;		    
+	for(i=0;i<8;i++)  
+	{  
+		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
+		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
+		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
+		for(n=0;n<128;n++) OLED_WR_Byte(1,OLED_DATA); 
+	} //更新显示
+}
+//在指定位置显示一个字符,包括部分字符
+//x:0~127
+//y:0~63
+//mode:0,反白显示;1,正常显示				 
+//size:选择字体 16/12 
+void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
+{      	
+	unsigned char c=0,i=0;	
+		c=chr-' ';//得到偏移后的值			
+		if(x>Max_Column-1){x=0;y=y+2;}
+		if(Char_Size ==16) {
+			OLED_Set_Pos(x,y);	
+			for(i=0;i<8;i++)
+			OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
+			OLED_Set_Pos(x,y+1);
+			for(i=0;i<8;i++)
+			OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
+		} else {	
+			OLED_Set_Pos(x,y);
+			for(i=0;i<6;i++)
+			OLED_WR_Byte(F6x8[c][i],OLED_DATA);
+		}
+}
+//m^n函数
+u32 oled_pow(u8 m,u8 n)
+{
+	u32 result=1;	 
+	while(n--)result*=m;    
+	return result;
+}				  
+//显示2个数字
+//x,y :起点坐标	 
+//len :数字的位数
+//size:字体大小
+//mode:模式	0,填充模式;1,叠加模式
+//num:数值(0~4294967295);	 		  
+void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2)
+{         	
+	u8 t,temp;
+	u8 enshow=0;						   
+	for(t=0;t<len;t++) {
+		temp=(num/oled_pow(10,len-t-1))%10;
+		if(enshow==0&&t<(len-1)) {
+			if(temp==0) {
+				OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
+				continue;
+			} else { 
+				enshow=1; 
+			}  
+		}
+	 	OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2); 
+	}
+} 
+//显示一个字符号串
+void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 Char_Size)
+{
+	unsigned char j=0;
+	while(chr[j]!='\0') {		
+		OLED_ShowChar(x,y,chr[j],Char_Size);
+		x+=8;
+		if(x>120){
+			x=0;
+			y+=2;
+		}
+		j++;
+	}
+}
+//显示汉字
+void OLED_ShowCHinese(u8 x,u8 y,u8 no)
+{      			    
+	u8 t,adder=0;
+	OLED_Set_Pos(x,y);	
+  for(t=0;t<16;t++) {
+		OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);
+		adder+=1;
+  }	
+	OLED_Set_Pos(x,y+1);	
+  for(t=0;t<16;t++) {	
+		OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);
+		adder+=1;
+	}					
+}
+/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
+void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
+{ 	
+	unsigned int j=0;
+	unsigned char x,y;
+  
+  if(y1%8==0) y=y1/8;      
+  else y=y1/8+1;
+	for(y=y0;y<y1;y++) {
+		OLED_Set_Pos(x0,y);
+    for(x=x0;x<x1;x++) {      
+			OLED_WR_Byte(BMP[j++],OLED_DATA);	    	
+	  }
+	}
+} 
+//初始化SSD1306					    
+void OLED_Init(void)
+{ 	
+ 	GPIO_InitTypeDef  GPIO_InitStructure;
+
+	OLED_SCLK_PORT_APBxClkCmd(OLED_SCLK_PORT_CLK, ENABLE);
+	OLED_SDIN_PORT_APBxClkCmd(OLED_SDIN_PORT_CLK, ENABLE);
+
+	GPIO_InitStructure.GPIO_Pin = OLED_SCLK_PIN;	 
+ 	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ 	GPIO_Init(OLED_SCLK_PORT, &GPIO_InitStructure);
+	GPIO_InitStructure.GPIO_Pin = OLED_SDIN_PIN;
+	GPIO_Init(OLED_SDIN_PORT, &GPIO_InitStructure);
+
+ 	GPIO_SetBits(OLED_SCLK_PORT,OLED_SCLK_PIN);	
+	GPIO_SetBits(OLED_SDIN_PORT,OLED_SDIN_PIN);	
+
+	DELAYClass.DelayMs(800);
+	OLED_WR_Byte(0xAE,OLED_CMD);//--display off
+	OLED_WR_Byte(0x00,OLED_CMD);//---set low column address
+	OLED_WR_Byte(0x10,OLED_CMD);//---set high column address
+	OLED_WR_Byte(0x40,OLED_CMD);//--set start line address  
+	OLED_WR_Byte(0xB0,OLED_CMD);//--set page address
+	OLED_WR_Byte(0x81,OLED_CMD); // contract control
+	OLED_WR_Byte(0xFF,OLED_CMD);//--128   
+	OLED_WR_Byte(0xA1,OLED_CMD);//set segment remap 
+	OLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverse
+	OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)
+	OLED_WR_Byte(0x3F,OLED_CMD);//--1/32 duty
+	OLED_WR_Byte(0xC8,OLED_CMD);//Com scan direction
+	OLED_WR_Byte(0xD3,OLED_CMD);//-set display offset
+	OLED_WR_Byte(0x00,OLED_CMD);//
+	OLED_WR_Byte(0xD5,OLED_CMD);//set osc division
+	OLED_WR_Byte(0x80,OLED_CMD);//
+	OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode off
+	OLED_WR_Byte(0x05,OLED_CMD);//
+	OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge Period
+	OLED_WR_Byte(0xF1,OLED_CMD);//
+	OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartion
+	OLED_WR_Byte(0x12,OLED_CMD);//
+	OLED_WR_Byte(0xDB,OLED_CMD);//set Vcomh
+	OLED_WR_Byte(0x30,OLED_CMD);//
+	OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enable
+	OLED_WR_Byte(0x14,OLED_CMD);//
+	OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel
+	DELAYClass.DelayMs(10);
+	OLED_Clear();
+}  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

module_Template/OLED0.96/OLED.h

@@ -0,0 +1,58 @@
+#ifndef __OLED_H
+#define __OLED_H			  
+
+#include "main.h"   	
+
+#define OLED_MODE 0
+#define SIZE 8
+#define XLevelL		0x00
+#define XLevelH		0x10
+#define Max_Column	128
+#define Max_Row		64
+#define	Brightness	0xFF 
+#define X_WIDTH 	128
+#define Y_WIDTH 	64	    	
+
+//-----------------OLED IIC端口定义----------------  	
+#define  OLED_SCLK_PORT_CLK           (RCC_APB2Periph_GPIOB)
+#define  OLED_SCLK_PORT_APBxClkCmd    RCC_APB2PeriphClockCmd
+#define  OLED_SDIN_PORT_CLK           (RCC_APB2Periph_GPIOB)
+#define  OLED_SDIN_PORT_APBxClkCmd    RCC_APB2PeriphClockCmd
+#define  OLED_SCLK_PORT               GPIOB
+#define  OLED_SCLK_PIN                GPIO_Pin_1
+#define  OLED_SDIN_PORT               GPIOB
+#define  OLED_SDIN_PIN                GPIO_Pin_0
+
+#define OLED_SCLK_Clr() GPIO_ResetBits(OLED_SCLK_PORT, OLED_SCLK_PIN)//SCL
+#define OLED_SCLK_Set() GPIO_SetBits(OLED_SCLK_PORT,OLED_SCLK_PIN)
+
+#define OLED_SDIN_Clr() GPIO_ResetBits(OLED_SDIN_PORT,OLED_SDIN_PIN)//SDA
+#define OLED_SDIN_Set() GPIO_SetBits(OLED_SDIN_PORT,OLED_SDIN_PIN)
+
+#define OLED_CMD  0	//写命令
+#define OLED_DATA 1	//写数据
+
+//OLED控制用函数
+void OLED_WR_Byte(unsigned dat,unsigned cmd);  
+void OLED_Display_On(void);
+void OLED_Display_Off(void);	   							   		    
+void OLED_Init(void);
+void OLED_Clear(void);
+void OLED_DrawPoint(u8 x,u8 y,u8 t);
+void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot);
+void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);
+void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size);
+void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size);	 
+void OLED_Set_Pos(unsigned char x, unsigned char y);
+void OLED_ShowCHinese(u8 x,u8 y,u8 no);
+void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
+void fill_picture(unsigned char fill_Data);
+void IIC_Start(void);
+void IIC_Stop(void);
+void Write_IIC_Command(unsigned char IIC_Command);
+void Write_IIC_Data(unsigned char IIC_Data);
+void Write_IIC_Byte(unsigned char IIC_Byte);
+void IIC_Wait_Ack(void);
+
+#endif  
+	 

module_Template/OLED0.96/OLEDFont.h

@@ -0,0 +1,219 @@
+#ifndef __OLEDFONT_H
+#define __OLEDFONT_H 	   
+//常用ASCII表
+//偏移量32
+//ASCII字符集
+//偏移量32
+//大小:12*6
+/************************************6*8的点阵************************************/
+const unsigned char F6x8[][6] =		
+{
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
+0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
+0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
+0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
+0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
+0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
+0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
+0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
+0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
+0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
+0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
+0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
+0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
+0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
+0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
+0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
+0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
+0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
+0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
+0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
+0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
+0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
+0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
+0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
+0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
+0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
+0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
+0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
+0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
+0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
+0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
+0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
+0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
+0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
+0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
+0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
+0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
+0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
+0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
+0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
+0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
+0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
+0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
+0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
+0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
+0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
+0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
+0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
+0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
+0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
+0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
+0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
+0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
+0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
+0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
+0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
+0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
+0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
+0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
+0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
+0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
+0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
+0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
+0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
+0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
+0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
+0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
+0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
+0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
+0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
+0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
+0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
+0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
+0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
+0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
+0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
+0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
+0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
+0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
+0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
+0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
+0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
+0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
+0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
+0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
+0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
+0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
+0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
+0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
+0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
+};
+/****************************************8*16的点阵************************************/
+const unsigned char F8X16[]=	  
+{
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
+  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
+  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
+  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
+  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
+  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
+  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
+  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
+  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
+  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
+  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
+  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
+  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
+  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
+  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
+  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
+  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
+  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
+  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
+  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
+  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
+  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
+  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
+  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
+  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
+  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
+  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
+  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
+  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
+  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
+  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
+  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
+  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
+  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
+  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
+  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
+  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
+  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
+  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
+  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
+  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
+  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
+  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
+  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
+  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
+  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
+  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
+  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
+  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
+  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
+  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
+  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
+  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
+  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
+  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
+  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
+  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
+  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
+  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
+  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
+  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
+  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
+  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
+  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
+  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
+  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
+  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
+  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
+  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
+  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
+  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
+  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
+  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
+  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
+  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
+  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
+  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
+  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
+  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
+  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
+  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
+  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
+  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
+  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
+  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
+  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
+  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
+  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
+  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
+  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
+  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
+  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
+};
+const char Hzk[][32]={
+
+/*--0  文字:  智  --*/
+/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
+{0x10,0x94,0x53,0x32,0x1E,0x32,0x52,0x10,0x00,0x7E,0x42,0x42,0x42,0x7E,0x00,0x00},
+{0x00,0x00,0x00,0xFF,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,0x00},
+
+/*--1  文字:  能  --*/
+/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
+{0x08,0xCC,0x4A,0x49,0x48,0x4A,0xCC,0x18,0x00,0x7F,0x88,0x88,0x84,0x82,0xE0,0x00},
+{0x00,0xFF,0x12,0x12,0x52,0x92,0x7F,0x00,0x00,0x7E,0x88,0x88,0x84,0x82,0xE0,0x00},
+
+};                                       
+                                
+#endif                                                                          
+
+

module_Template/SIM900A/GSM_config.c

@@ -0,0 +1,159 @@
+#include "main.h"
+//// C lib
+//#include <stdarg.h>	 	 
+//#include <stdio.h> 	 
+//#include <string.h>	 
+
+
+#if 0
+#define  GSM_USARTx                   USART1
+#define  GSM_USART_CLK                RCC_APB2Periph_USART1
+#define  GSM_USART_APBxClkCmd         RCC_APB2PeriphClockCmd
+#define  GSM_USART_BAUDRATE           115200
+
+#define  GSM_USART_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  GSM_USART_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+    
+#define  GSM_USART_TX_GPIO_PORT       GPIOA   
+#define  GSM_USART_TX_GPIO_PIN        GPIO_Pin_9
+#define  GSM_USART_RX_GPIO_PORT       GPIOA
+#define  GSM_USART_RX_GPIO_PIN        GPIO_Pin_10
+
+#define  GSM_USART_IRQ                USART1_IRQn
+#define  GSM_USART_IRQHandler         USART1_IRQHandler
+
+#else
+#define  GSM_USARTx                   USART2
+#define  GSM_USART_CLK                RCC_APB1Periph_USART2
+#define  GSM_USART_APBxClkCmd         RCC_APB1PeriphClockCmd
+#define  GSM_USART_BAUDRATE           9600
+                                        
+#define  GSM_USART_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  GSM_USART_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+                                        
+#define  GSM_USART_TX_GPIO_PORT       GPIOA   
+#define  GSM_USART_TX_GPIO_PIN        GPIO_Pin_2
+#define  GSM_USART_RX_GPIO_PORT       GPIOA
+#define  GSM_USART_RX_GPIO_PIN        GPIO_Pin_3
+                                        
+#define  GSM_USART_IRQ                USART2_IRQn
+#define  GSM_USART_IRQHandler         USART2_IRQHandler
+#endif
+
+//	
+char GSM_USART_RX_BUF[GSM_USART_MAX_RECV_LEN]; 				
+char GSM_USART_TX_BUF[GSM_USART_MAX_SEND_LEN]; 				
+
+// [14:0]: 接收字节数 [15]: 接收完成标志
+volatile uint16_t GSM_USART_RX_STA = 0;   	
+
+// GSM串口中断处理
+void GSM_USART_IRQHandler(void)
+{
+	uint8_t res;	      
+	if(USART_GetITStatus(GSM_USARTx, USART_IT_RXNE) != RESET)
+	{	 
+		res = USART_ReceiveData(GSM_USARTx);
+		if((GSM_USART_RX_STA&(1<<15))==0)
+		{ 
+			if(GSM_USART_RX_STA<GSM_USART_MAX_RECV_LEN)
+			{
+				TIM_SetCounter(TIM3,0);
+				if(GSM_USART_RX_STA==0) 
+				{
+					TIM_Cmd(TIM3,ENABLE);
+				}
+				GSM_USART_RX_BUF[GSM_USART_RX_STA++]=res;	
+			}else 
+			{
+				GSM_USART_RX_STA|=1<<15;
+			} 
+		}
+		USART_ClearITPendingBit(GSM_USARTx, USART_IT_RXNE);
+	}  				 											 
+}   
+// TIM3中断处理
+void TIM3_IRQHandler(void)
+{ 	
+	if (TIM_GetITStatus(TIM3, TIM_IT_Update) != RESET)
+	{	 			   
+		GSM_USART_RX_STA|=1<<15;
+		TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
+		TIM_Cmd(TIM3, DISABLE); 
+	}	    
+}
+/**
+  * @brief  GSM 10ms定时器初始化
+	* @param  None
+  * @retval None
+  * @note   用于检测GSM串口接收状态
+*/
+void GSM_TIM3_Init(void)
+{	
+	NVIC_InitTypeDef NVIC_InitStructure;
+	TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
+
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
+	
+	TIM_DeInit(TIM3);
+	TIM_TimeBaseStructure.TIM_Period = 1000-1; 
+	TIM_TimeBaseStructure.TIM_Prescaler = 7200-1; 
+	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; 
+	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; 
+	TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
+
+	TIM_ITConfig(TIM3,TIM_IT_Update,ENABLE);
+	TIM_Cmd(TIM3,DISABLE);
+
+	NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+}
+/**
+  * @brief  GSM 串口初始化
+	* @param  bound: 波特率
+  * @retval None
+  * @note   None
+*/
+void GSM_USART_Init(uint32_t bound)
+{  
+	NVIC_InitTypeDef NVIC_InitStructure;
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+
+	GSM_USART_GPIO_APBxClkCmd(GSM_USART_GPIO_CLK, ENABLE);
+	GSM_USART_APBxClkCmd(GSM_USART_CLK,ENABLE);
+
+ 	USART_DeInit(GSM_USARTx); 
+	//USART_TX
+  GPIO_InitStructure.GPIO_Pin = GSM_USART_TX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+  GPIO_Init(GSM_USART_TX_GPIO_PORT, &GPIO_InitStructure);
+  //USART_RX
+  GPIO_InitStructure.GPIO_Pin = GSM_USART_RX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+  GPIO_Init(GSM_USART_RX_GPIO_PORT, &GPIO_InitStructure);
+	
+	USART_InitStructure.USART_BaudRate = bound;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;	
+	USART_Init(GSM_USARTx, &USART_InitStructure);
+	
+	USART_Cmd(GSM_USARTx, ENABLE);
+  USART_ITConfig(GSM_USARTx, USART_IT_RXNE, ENABLE);
+	
+	NVIC_InitStructure.NVIC_IRQChannel = GSM_USART_IRQ;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);	//
+	
+	GSM_USART_RX_STA=0;
+}
+

module_Template/SIM900A/GSM_config.h

@@ -0,0 +1,26 @@
+#ifndef __GSM_CONFIG_H
+#define __GSM_CONFIG_H	 
+
+#include "main.h" 	   
+
+<<<<<<< HEAD
+#define GSM_USART_MAX_RECV_LEN		64		//	接收缓存大小
+#define GSM_USART_MAX_SEND_LEN		64		//  发送缓存大小
+=======
+#define GSM_USART_MAX_RECV_LEN		128		//	接收缓存大小
+#define GSM_USART_MAX_SEND_LEN		32		//  发送缓存大小
+>>>>>>> updata
+#define GSM_USART_RX_EN 					1			//  接收使能标志
+
+#define  GSM_USARTx                   USART2
+
+extern char  GSM_USART_RX_BUF[GSM_USART_MAX_RECV_LEN]; 
+extern char  GSM_USART_TX_BUF[GSM_USART_MAX_SEND_LEN];
+extern volatile uint16_t GSM_USART_RX_STA; // 接收数据状态
+
+void GSM_USART_IRQHandler(void);
+void TIM3_IRQHandler(void);
+void GSM_TIM3_Init(void);
+void GSM_USART_Init(uint32_t bound);
+
+#endif

module_Template/SIM900A/GSM_func.c

@@ -0,0 +1,299 @@
+#include "main.h"
+//// C lib
+//#include <stdlib.h>
+//#include <string.h>
+//#include <stdio.h>
+//// system
+//#include "delay.h"
+//// GSM
+//#include "GSM_config.h"
+
+
+static char* GSM_check_cmd(char *str);
+<<<<<<< HEAD
+static char GSM_send_cmd(char *cmd,char *ack,uint16_t waittime);
+static char GSM_consta_check(void);
+static void GSM_get_wanip(char* ipbuf);
+static void GSM_sendData(char* fmt,...);
+
+// GSM信息  联网的GSM名称和密码
+const char* GSM_phoneNum="18782876903";
+const char* GSM_message="help me";
+=======
+static void GSM_sendData(char* fmt,...);
+
+// GSM信息
+const char* GSM_phoneNum = "19198022169";
+const char* GSM_head = "send:";
+>>>>>>> updata
+
+/**
+	* @brief  向GSM串口发送数据
+	* @param  fmt: 类似printf的数据格式
+  * @retval None
+  * @note   None
+*/
+void GSM_sendData(char* fmt,...)  
+{  
+	uint16_t i,j; 
+	va_list ap; 
+	va_start(ap,fmt);
+	vsprintf((char*)GSM_USART_TX_BUF,fmt,ap);
+	va_end(ap);
+	i = strlen((const char*)GSM_USART_TX_BUF);		
+	for(j=0; j<i; j++)						
+	{
+	  while(USART_GetFlagStatus(GSM_USARTx,USART_FLAG_TC)==RESET); 
+		USART_SendData(GSM_USARTx,GSM_USART_TX_BUF[j]); 
+	} 
+}
+/**
+<<<<<<< HEAD
+	* @brief  清零缓存区并清零接收标志
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void GSM_clear(void)
+{
+	memset(GSM_USART_RX_BUF, 0, GSM_USART_MAX_RECV_LEN);
+	GSM_USART_RX_STA = 0;
+}
+/**
+=======
+>>>>>>> updata
+	* @brief  检测应答
+	* @param  str: 期待的应答结果
+  * @retval 0: 没有接收到期待应答
+	* @retval !0: 其他值代表期待应答结果的位置
+	* @note   None
+*/
+static char* GSM_check_cmd(char *str)
+{
+	char *strx=0;
+	// 接收到一次数据了
+	if(GSM_USART_RX_STA&0X8000)		
+	{ 
+		// 添加结束符
+		GSM_USART_RX_BUF[GSM_USART_RX_STA&0X7FFF]=0;
+		// 检索字符串
+		strx=strstr(GSM_USART_RX_BUF,str);
+		#ifdef DEBUG_printf
+		printf("rec data: %s\n",GSM_USART_RX_BUF);
+		#endif
+	} 
+	return strx;
+}
+/**
+	* @brief  向GSM发送命令
+	* @param  cmd: 发送的命令字符串
+	* @param	ack: 期待的应答结果,如果为空,则表示不需要等待应答
+	* @param	waittime: 等待时间(单位:10ms)
+	* @retval 0: 发送成功(得到了期待的应答结果), 
+	* @retval	1: 发送失败
+	* @note   None
+*/
+<<<<<<< HEAD
+static char GSM_send_cmd(char *cmd,char *ack,uint16_t waittime)
+=======
+char GSM_send_cmd(char *cmd,char *ack,uint16_t waittime)
+>>>>>>> updata
+{
+	char res=0; 
+	GSM_USART_RX_STA=0;
+	//发送命令
+	GSM_sendData("%s",cmd);	
+	if(ack&&waittime)		//需要等待应答
+	{
+		while(--waittime)	//等待倒计时
+		{
+			DELAYClass.DelayMs(10);
+			if(GSM_USART_RX_STA&0X8000)//接收到期待的应答结果
+			{
+<<<<<<< HEAD
+				if(*GSM_check_cmd(ack))
+=======
+				if(GSM_check_cmd(ack) != ((void *)0))
+>>>>>>> updata
+				{
+					break; // 得到有效数据 
+				}
+					GSM_USART_RX_STA=0;
+			} 
+		}
+		if(waittime==0)res=1; 
+	}
+	return res;
+} 
+/**
+<<<<<<< HEAD
+	* @brief  发送短信
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void GSM_sendMessage(void)
+=======
+  * @brief  string转换int
+	* @param  *str:字符串地址
+  * @retval 返回int型
+  * @note   None
+*/
+int stringToInt(char *str)
+{
+	char *p = str;
+	int nNUM = 0;
+	
+	while (*p >= '0' && *p <= '9')
+	{
+		nNUM = nNUM * 10 + (*p - '0');
+		p++;
+	}
+	return nNUM;
+}
+/**
+	* @brief  发送短信
+	* @param  None
+  * @retval None
+*/
+void GSM_sendMessage(char *message)
+>>>>>>> updata
+{
+	char p[40];
+
+	#ifdef DEBUG_printf
+<<<<<<< HEAD
+	printf("1. AT+CPIN?\n");
+	#endif
+	while(GSM_send_cmd("AT+CPIN?\r\n","OK",100));		// 查询卡状态
+	#ifdef DEBUG_printf
+=======
+	printf("0. AT+CPIN?\n");
+	#endif
+	while(GSM_send_cmd("AT+CPIN?\r\n","OK",100));		// 查询卡状态
+	#ifdef DEBUG_printf
+	printf("1. AT+CMGF=1\n");
+	#endif
+	while(GSM_send_cmd("AT+CMGF=1\r\n","OK",100));		// 设置TXT模式
+	#ifdef DEBUG_printf
+>>>>>>> updata
+	printf("2. AT+CMGS=\n");
+	#endif
+	sprintf((char*)p,"AT+CMGS=\"%s\"\r\n",GSM_phoneNum); // 设置目标手机号
+	while(GSM_send_cmd(p,">",100));  
+	DELAYClass.DelayMs(50);
+	#ifdef DEBUG_printf
+<<<<<<< HEAD
+	printf("3. %s\n",GSM_message);
+	#endif
+	sprintf((char*)p,"%s\r\n",GSM_message); // 设置发送内容
+=======
+	printf("3. %s\n",message);
+	#endif
+	sprintf((char*)p,"%s\r\n",message); // 设置发送内容
+>>>>>>> updata
+	GSM_send_cmd(p,">",100);  
+	DELAYClass.DelayMs(50);
+	#ifdef DEBUG_printf
+	printf("4. %x\n", 0x1A);
+	#endif
+	USART_SendData(USART2, 0x1A); // 确认发送
+}
+<<<<<<< HEAD
+
+=======
+/**
+	* @brief  等待接收短信
+	* @param  None
+  * @retval 0：无短信，!0：接收到的短信的存放地址
+*/
+uint8_t GSM_waitMessage(void)
+{
+	// 接收到一次数据了
+	if(GSM_USART_RX_STA&0X8000)		
+	{ 
+		GSM_USART_RX_BUF[GSM_USART_RX_STA&0X7FFF]=0; // 添加结束符
+#ifdef DEBUG_printf
+		printf("(waitMes)%s\n", GSM_USART_RX_BUF);
+#endif		
+		char *strx = 0;
+		// 检索字符串  含有"SM",则代表接收到短信
+		strx=strstr(GSM_USART_RX_BUF,"\"SM\",");
+		// 返回不为空则检索到指定字符串
+		if(strx != ((void *)0))
+		{
+#ifdef DEBUG_printf
+			printf("message rec success, addr : %d\n", stringToInt(strx+5));
+#endif
+			uint8_t addrNum = stringToInt(strx+5); // 将地址号保存
+			GSM_USART_RX_STA = 0; // 清除接收标记
+			return addrNum;
+		}
+		GSM_USART_RX_STA = 0;
+	} 
+	return 0;
+}
+/**
+	* @brief  查看短信
+	* @param  None
+  * @retval 返回帧头后的一个字节数据
+*/
+char GSM_readMessage(uint8_t addrNum)
+{
+	char pp[40];
+	uint8_t i = 0;
+	sprintf((char*)pp,"AT+CMGR=%d\r\n",addrNum); // 查看该地址下的短信
+	GSM_USART_RX_STA = 0;
+	// 等待2s
+	for(i = 0; i <= 200; i++) 
+	{
+		if(i % 50 == 0) // 每0.5s重发一次
+		{
+#ifdef DEBUG_printf
+			printf("i = %d\n", i);
+#endif
+			GSM_sendData("%s", pp);
+		}
+		DELAYClass.DelayMs(10);
+		if(GSM_USART_RX_STA&0X8000)		
+		{ 
+			// 添加结束符
+			GSM_USART_RX_BUF[GSM_USART_RX_STA&0X7FFF]=0;
+#ifdef DEBUG_printf
+			printf("(readMes)%s\n", GSM_USART_RX_BUF);
+#endif
+			char *strx = 0;
+			// 检索字符串  含有"send:",则代表查看短信成功
+			strx=strstr(GSM_USART_RX_BUF,GSM_head);
+			// 返回不为空则检索到指定字符串
+			if(strx != ((void *)0))
+			{
+#ifdef DEBUG_printf
+				printf("message read success, cmd : %c\n", strx[5]);
+#endif
+				char cmd = 0;
+				cmd = strx[5]; // 此处可根据需求修改 当前是返回的send:后的一个字节
+				GSM_USART_RX_STA = 0; // 清除接收标记
+				DELAYClass.DelayMs(10);
+				sprintf((char*)pp,"AT+CMGD=%d\r\n",addrNum); // 删除该地址下的短信
+				GSM_sendData("%s", pp);
+				return cmd;
+			}
+			GSM_USART_RX_STA = 0;
+		}
+	}
+	GSM_USART_RX_STA = 0;
+	return 0;
+}
+>>>>>>> updata
+/**
+  * @brief  GSM初始化
+  * @param  None
+  * @retval None
+  * @note   None
+	*/
+void GSM_Init(void)
+{
+	GSM_USART_Init(9600);
+	GSM_TIM3_Init();
+}

module_Template/SIM900A/GSM_func.h

@@ -0,0 +1,21 @@
+#ifndef __WIFI_FUNC_H
+#define __WIFI_FUNC_H
+
+#include "main.h"
+
+<<<<<<< HEAD
+void GSM_clear(void);
+void GSM_sendMessage(void);
+=======
+
+char GSM_send_cmd(char *cmd,char *ack,uint16_t waittime);
+int stringToInt(char *str);
+void GSM_sendMessage(char *message);
+uint8_t GSM_waitMessage(void);
+char GSM_readMessage(uint8_t addrNum);
+>>>>>>> updata
+void GSM_Init(void);
+#endif
+
+
+

module_Template/SIM900A/README.txt

@@ -0,0 +1,9 @@
+<<<<<<< HEAD
+SIM900A短信模块 仅实现发短信  移动卡效果较好
+=======
+SIM900A短信模块 实现收发短信  移动卡效果较好
+
+判断串口接收，接受到了之后查找是否有["SM",]。有则代表接收到短信，且该，后面含有存短信的地址号x。
+之后分离出地址号x，用[AT+CMGR=x]读取，读取之后查找短信头[send]（自己定义的短信头）分离出短信内容（send:1）。
+然后删除该短信[AT+CMGD=x]。
+>>>>>>> updata

module_Template/USART&TIM/README.txt

@@ -0,0 +1 @@
+串口配合定时器，实现接收不定长数据

module_Template/USART&TIM/USART_TIM.c

@@ -0,0 +1,174 @@
+#include "main.h"	 
+
+#if 1
+#define  USART_TIMx                   USART1
+#define  USART_TIM_CLK                RCC_APB2Periph_USART1
+#define  USART_TIM_APBxClkCmd         RCC_APB2PeriphClockCmd
+#define  USART_TIM_BAUDRATE           9600
+
+#define  USART_TIM_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  USART_TIM_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+    
+#define  USART_TIM_TX_GPIO_PORT       GPIOA   
+#define  USART_TIM_TX_GPIO_PIN        GPIO_Pin_9
+#define  USART_TIM_RX_GPIO_PORT       GPIOA
+#define  USART_TIM_RX_GPIO_PIN        GPIO_Pin_10
+
+#define  USART_TIM_IRQ                USART1_IRQn
+#define  USART_TIM_IRQHandler         USART1_IRQHandler
+#else
+#define  USART_TIMx                   USART2
+#define  USART_TIM_CLK                RCC_APB1Periph_USART2
+#define  USART_TIM_APBxClkCmd         RCC_APB1PeriphClockCmd
+#define  USART_TIM_BAUDRATE           115200
+                                        
+#define  USART_TIM_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  USART_TIM_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+                                        
+#define  USART_TIM_TX_GPIO_PORT       GPIOA   
+#define  USART_TIM_TX_GPIO_PIN        GPIO_Pin_2
+#define  USART_TIM_RX_GPIO_PORT       GPIOA
+#define  USART_TIM_RX_GPIO_PIN        GPIO_Pin_3
+                                        
+#define  USART_TIM_IRQ                USART2_IRQn
+#define  USART_TIM_IRQHandler         USART2_IRQHandler
+#endif
+
+// 串口接收和发送缓存区
+char USART_TIM_RX_BUF[USART_TIM_MAX_RECV_LEN]; 				
+char USART_TIM_TX_BUF[USART_TIM_MAX_SEND_LEN]; 				
+
+// [14:0]: 接收字节数 [15]: 接收完成标志
+volatile uint16_t USART_TIM_RX_STA = 0;   	
+
+// WIFI串口中断处理
+void USART_TIM_IRQHandler(void)
+{
+	uint8_t res;	      
+	if(USART_GetITStatus(USART_TIMx, USART_IT_RXNE) != RESET)
+	{	 
+		res =USART_ReceiveData(USART_TIMx);		 
+		if((USART_TIM_RX_STA&(1<<15))==0)
+		{ 
+			if(USART_TIM_RX_STA<USART_TIM_MAX_RECV_LEN)
+			{
+				TIM_SetCounter(TIM3,0);
+				if(USART_TIM_RX_STA==0) 
+				{
+					TIM_Cmd(TIM3,ENABLE);
+				}
+				USART_TIM_RX_BUF[USART_TIM_RX_STA++]=res;	
+			}else 
+			{
+				USART_TIM_RX_STA|=1<<15;
+			} 
+		}
+	}  				 											 
+}   
+/* 在别处复现 接收到数据的处理函数
+void USART_Rec_Handle(void)
+{
+	// 接收到一次数据了
+	if(USART_TIM_RX_STA&0X8000)		
+	{ 
+		// 添加结束符
+		USART_TIM_RX_BUF[USART_TIM_RX_STA&0X7FFF]=0;
+#ifdef DEBUG_printf
+		printf("%s\n",USART_TIM_RX_BUF);
+#endif
+		// user handle
+		
+		// 清空缓存区
+		memset(USART_TIM_RX_BUF, 0, USART_TIM_MAX_RECV_LEN);
+		// 清除接收标志
+		USART_TIM_RX_STA = 0;
+	} 
+}
+*/
+// TIM3中断处理
+void TIM3_IRQHandler(void)
+{ 	
+	if(TIM_GetITStatus(TIM3, TIM_IT_Update) != RESET)
+	{	 			   
+		USART_TIM_RX_STA|=1<<15;
+		TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
+		TIM_Cmd(TIM3, DISABLE); 
+	}	    
+}
+/**
+  * @brief  10ms定时器初始化
+	* @param  None
+  * @retval None
+  * @note   用于检测串口接收状态
+*/
+void USART_TIM_TIM_Init(void)
+{	
+	NVIC_InitTypeDef NVIC_InitStructure;
+	TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
+
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
+	
+	TIM_DeInit(TIM3);
+	TIM_TimeBaseStructure.TIM_Period = 1000-1; 
+	TIM_TimeBaseStructure.TIM_Prescaler = 7200-1; 
+	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; 
+	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; 
+	TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
+
+	TIM_ITConfig(TIM3,TIM_IT_Update,ENABLE);
+	TIM_Cmd(TIM3,DISABLE);
+
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+}
+/**
+  * @brief  串口初始化
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void USART_TIM_USART_Init(void)
+{  
+	NVIC_InitTypeDef NVIC_InitStructure;
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+
+	USART_TIM_GPIO_APBxClkCmd(USART_TIM_GPIO_CLK, ENABLE);
+	USART_TIM_APBxClkCmd(USART_TIM_CLK,ENABLE);
+
+ 	USART_DeInit(USART_TIMx); 
+	//USART_TX
+  GPIO_InitStructure.GPIO_Pin = USART_TIM_TX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+  GPIO_Init(USART_TIM_TX_GPIO_PORT, &GPIO_InitStructure);
+  //USART_RX
+  GPIO_InitStructure.GPIO_Pin = USART_TIM_RX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+  GPIO_Init(USART_TIM_RX_GPIO_PORT, &GPIO_InitStructure);
+	
+	USART_InitStructure.USART_BaudRate = USART_TIM_BAUDRATE;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;	
+	USART_Init(USART_TIMx, &USART_InitStructure);
+	
+	USART_Cmd(USART_TIMx, ENABLE);
+  USART_ITConfig(USART_TIMx, USART_IT_RXNE, ENABLE);
+
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	NVIC_InitStructure.NVIC_IRQChannel = USART_TIM_IRQ;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+	
+	USART_TIM_RX_STA=0;
+}
+

module_Template/USART&TIM/USART_TIM.h

@@ -0,0 +1,19 @@
+#ifndef __USART_TIM_AS_H
+#define __USART_TIM_AS_H	 
+
+#include "main.h" 	   
+
+#define USART_TIM_MAX_RECV_LEN		128		//	接收缓存大小
+#define USART_TIM_MAX_SEND_LEN		64		//  发送缓存大小
+#define USART_TIM_RX_EN 					1			//  接收使能标志
+
+#define  USART_TIMx                   USART1
+
+extern char  USART_TIM_RX_BUF[USART_TIM_MAX_RECV_LEN]; 
+extern char  USART_TIM_TX_BUF[USART_TIM_MAX_SEND_LEN];
+extern volatile uint16_t USART_TIM_RX_STA; // 接收数据状态
+
+void USART_TIM_TIM_Init(void);
+void USART_TIM_USART_Init(void);
+
+#endif

module_Template/WIFIGetAPI/AllHeaderFileName.txt

@@ -0,0 +1,20 @@
+// ST lib
+#include "stm32f10x.h"
+// C lib
+#include <string.h>
+#include <stdio.h>
+#include <math.h>
+#include <stdlib.h>
+#include <float.h>
+#include <limits.h>
+#include <ctype.h>
+#include <stdarg.h>	 	
+#include <stddef.h>
+// system
+#include "delay.h"
+// wifi
+#include "cJSON.h"
+#include "myMalloc.h"
+#include "WIFI_config.h"
+#include "WIFI_func.h"
+#include "WIFI_handle.h"

module_Template/WIFIGetAPI/README.txt

@@ -0,0 +1 @@
+ESP8266获取网络API的cJson数据

module_Template/WIFIGetAPI/WIFI_config.c

@@ -0,0 +1,158 @@
+#include "main.h"
+//// C lib
+//#include <stdarg.h>	 	 
+//#include <stdio.h> 	 
+//#include <string.h>	 
+
+
+#if 1
+#define  WIFI_USARTx                   USART1
+#define  WIFI_USART_CLK                RCC_APB2Periph_USART1
+#define  WIFI_USART_APBxClkCmd         RCC_APB2PeriphClockCmd
+#define  WIFI_USART_BAUDRATE           115200
+
+#define  WIFI_USART_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  WIFI_USART_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+    
+#define  WIFI_USART_TX_GPIO_PORT       GPIOA   
+#define  WIFI_USART_TX_GPIO_PIN        GPIO_Pin_9
+#define  WIFI_USART_RX_GPIO_PORT       GPIOA
+#define  WIFI_USART_RX_GPIO_PIN        GPIO_Pin_10
+
+#define  WIFI_USART_IRQ                USART1_IRQn
+#define  WIFI_USART_IRQHandler         USART1_IRQHandler
+
+#else
+#define  WIFI_USARTx                   USART2
+#define  WIFI_USART_CLK                RCC_APB1Periph_USART2
+#define  WIFI_USART_APBxClkCmd         RCC_APB1PeriphClockCmd
+#define  WIFI_USART_BAUDRATE           115200
+                                        
+#define  WIFI_USART_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  WIFI_USART_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+                                        
+#define  WIFI_USART_TX_GPIO_PORT       GPIOA   
+#define  WIFI_USART_TX_GPIO_PIN        GPIO_Pin_2
+#define  WIFI_USART_RX_GPIO_PORT       GPIOA
+#define  WIFI_USART_RX_GPIO_PIN        GPIO_Pin_3
+                                        
+#define  WIFI_USART_IRQ                USART2_IRQn
+#define  WIFI_USART_IRQHandler         USART2_IRQHandler
+#endif
+
+//	
+char WIFI_USART_RX_BUF[WIFI_USART_MAX_RECV_LEN]; 				
+char WIFI_USART_TX_BUF[WIFI_USART_MAX_SEND_LEN]; 				
+
+// [14:0]: 接收字节数 [15]: 接收完成标志
+volatile uint16_t WIFI_USART_RX_STA = 0;   	
+
+// WIFI串口中断处理
+void WIFI_USART_IRQHandler(void)
+{
+	uint8_t res;	      
+	if(USART_GetITStatus(WIFI_USARTx, USART_IT_RXNE) != RESET)
+	{	 
+		res =USART_ReceiveData(WIFI_USARTx);		 
+		if((WIFI_USART_RX_STA&(1<<15))==0)
+		{ 
+			if(WIFI_USART_RX_STA<WIFI_USART_MAX_RECV_LEN)
+			{
+				TIM_SetCounter(TIM3,0);
+				if(WIFI_USART_RX_STA==0) 
+				{
+					TIM_Cmd(TIM3,ENABLE);
+				}
+				WIFI_USART_RX_BUF[WIFI_USART_RX_STA++]=res;	
+			}else 
+			{
+				WIFI_USART_RX_STA|=1<<15;
+			} 
+		}
+	}  				 											 
+}   
+// TIM3中断处理
+void TIM3_IRQHandler(void)
+{ 	
+	if (TIM_GetITStatus(TIM3, TIM_IT_Update) != RESET)
+	{	 			   
+		WIFI_USART_RX_STA|=1<<15;
+		TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
+		TIM_Cmd(TIM3, DISABLE); 
+	}	    
+}
+/**
+  * @brief  WIFI 10ms定时器初始化
+	* @param  None
+  * @retval None
+  * @note   用于检测WIFI串口接收状态
+*/
+void WIFI_TIM3_Init(void)
+{	
+	NVIC_InitTypeDef NVIC_InitStructure;
+	TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
+
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
+	
+	TIM_DeInit(TIM3);
+	TIM_TimeBaseStructure.TIM_Period = 1000-1; 
+	TIM_TimeBaseStructure.TIM_Prescaler = 7200-1; 
+	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; 
+	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; 
+	TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
+
+	TIM_ITConfig(TIM3,TIM_IT_Update,ENABLE);
+	TIM_Cmd(TIM3,DISABLE);
+
+	NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+}
+/**
+  * @brief  WIFI 串口初始化
+	* @param  bound: 波特率
+  * @retval None
+  * @note   None
+*/
+void WIFI_USART_Init(uint32_t bound)
+{  
+	NVIC_InitTypeDef NVIC_InitStructure;
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+
+	WIFI_USART_GPIO_APBxClkCmd(WIFI_USART_GPIO_CLK, ENABLE);
+	WIFI_USART_APBxClkCmd(WIFI_USART_CLK,ENABLE);
+
+ 	USART_DeInit(WIFI_USARTx); 
+	//USART_TX
+  GPIO_InitStructure.GPIO_Pin = WIFI_USART_TX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+  GPIO_Init(WIFI_USART_TX_GPIO_PORT, &GPIO_InitStructure);
+  //USART_RX
+  GPIO_InitStructure.GPIO_Pin = WIFI_USART_RX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+  GPIO_Init(WIFI_USART_RX_GPIO_PORT, &GPIO_InitStructure);
+	
+	USART_InitStructure.USART_BaudRate = bound;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;	
+	USART_Init(WIFI_USARTx, &USART_InitStructure);
+	
+	USART_Cmd(WIFI_USARTx, ENABLE);
+  USART_ITConfig(WIFI_USARTx, USART_IT_RXNE, ENABLE);
+	
+	NVIC_InitStructure.NVIC_IRQChannel = WIFI_USART_IRQ;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);	//
+	
+	WIFI_USART_RX_STA=0;
+}
+

module_Template/WIFIGetAPI/WIFI_config.h

@@ -0,0 +1,19 @@
+#ifndef __WIFI_CONFIG_H
+#define __WIFI_CONFIG_H	 
+
+#include "main.h" 	   
+
+#define WIFI_USART_MAX_RECV_LEN		512		//	接收缓存大小
+#define WIFI_USART_MAX_SEND_LEN		128		//  发送缓存大小
+#define WIFI_USART_RX_EN 					1			//  接收使能标志
+
+#define  WIFI_USARTx                   USART1
+
+extern char  WIFI_USART_RX_BUF[WIFI_USART_MAX_RECV_LEN]; 
+extern char  WIFI_USART_TX_BUF[WIFI_USART_MAX_SEND_LEN];
+extern volatile uint16_t WIFI_USART_RX_STA; // 接收数据状态
+
+void WIFI_TIM3_Init(void);
+void WIFI_USART_Init(uint32_t bound);
+
+#endif

module_Template/WIFIGetAPI/WIFI_func.c

@@ -0,0 +1,336 @@
+#include "main.h"
+//// C lib
+//#include <stdlib.h>
+//#include <string.h>
+//#include <stdio.h>
+//// system
+//#include "delay.h"
+//// wifi
+//#include "WIFI_config.h"
+//#include "cJSON.h"
+
+
+static char* ESP8266_check_cmd(char *str);
+static char ESP8266_send_cmd(char *cmd,char *ack,uint16_t waittime);
+static char ESP8266_consta_check(void);
+static void ESP8266_get_wanip(char* ipbuf);
+static void WIFI_sendData(char* fmt,...);
+
+// WIFI信息  联网的WIFI名称和密码
+const char* WIFI_id="MNIAS";
+const char* WIFI_password="0123456789";
+
+/**
+	* @brief  向WIFI串口发送数据
+	* @param  fmt: 类似printf的数据格式
+  * @retval None
+  * @note   None
+*/
+void WIFI_sendData(char* fmt,...)  
+{  
+	uint16_t i,j; 
+	va_list ap; 
+	va_start(ap,fmt);
+	vsprintf((char*)WIFI_USART_TX_BUF,fmt,ap);
+	va_end(ap);
+	i = strlen((const char*)WIFI_USART_TX_BUF);		
+	for(j=0; j<i; j++)						
+	{
+	  while(USART_GetFlagStatus(WIFI_USARTx,USART_FLAG_TC)==RESET); 
+		USART_SendData(WIFI_USARTx,WIFI_USART_TX_BUF[j]); 
+	} 
+}
+/**
+	* @brief  清零缓存区并清零接收标志
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void ESP8266_clear(void)
+{
+	memset(WIFI_USART_RX_BUF, 0, WIFI_USART_MAX_RECV_LEN);
+	WIFI_USART_RX_STA = 0;
+}
+/**
+	* @brief  检测应答
+	* @param  str: 期待的应答结果
+  * @retval 0: 没有接收到期待应答
+	* @retval !0: 其他值代表期待应答结果的位置
+	* @note   None
+*/
+static char* ESP8266_check_cmd(char *str)
+{
+	char *strx=0;
+	// 接收到一次数据了
+	if(WIFI_USART_RX_STA&0X8000)		
+	{ 
+		// 添加结束符
+		WIFI_USART_RX_BUF[WIFI_USART_RX_STA&0X7FFF]=0;
+		// 检索字符串
+		strx=strstr(WIFI_USART_RX_BUF,str);
+	} 
+	return strx;
+}
+/**
+	* @brief  向WIFI发送命令
+	* @param  cmd: 发送的命令字符串
+	* @param	ack: 期待的应答结果,如果为空,则表示不需要等待应答
+	* @param	waittime: 等待时间(单位:10ms)
+	* @retval 0: 发送成功(得到了期待的应答结果), 
+	* @retval	1: 发送失败
+	* @note   None
+*/
+static char ESP8266_send_cmd(char *cmd,char *ack,uint16_t waittime)
+{
+	char res=0; 
+	WIFI_USART_RX_STA=0;
+	//发送命令
+	WIFI_sendData("%s",cmd);	
+	if(ack&&waittime)		//需要等待应答
+	{
+		while(--waittime)	//等待倒计时
+		{
+			DelayClass.DelayMs(10);
+			if(WIFI_USART_RX_STA&0X8000)//接收到期待的应答结果
+			{
+				if(*ESP8266_check_cmd(ack))
+				{
+					break; // 得到有效数据 
+				}
+					WIFI_USART_RX_STA=0;
+			} 
+		}
+		if(waittime==0)res=1; 
+	}
+	return res;
+} 
+/**
+	* @brief  退出透传
+	* @param  None
+	* @retval 0: 退出成功
+	* @retval 1: 退出失败
+  * @note   无后缀发送"+++"退出透传
+*/
+void ESP8266_quit_trans(void)   
+{
+	while(ESP8266_send_cmd("AT+CIPMODE=0\r\n","OK",100))
+	{
+		while((WIFI_USARTx->SR&0X40)==0);	// 等待发送空
+		WIFI_USARTx->DR='+';      
+		DelayClass.DelayMs(12);	// 大于串口组帧时间(10ms)
+		while((WIFI_USARTx->SR&0X40)==0);
+		WIFI_USARTx->DR='+';      
+		DelayClass.DelayMs(12);
+		while((WIFI_USARTx->SR&0X40)==0);
+		WIFI_USARTx->DR='+';  	
+		DelayClass.DelayMs(100);	// 等待100ms
+		ESP8266_send_cmd("AT+CIPCLOSE\r\n","OK",50);
+	}
+}
+/**
+	* @brief  获取WIFI连接状态
+	* @param  None
+	* @retval 0: 未连接
+	* @retval 1: 连接成功
+  * @note   None
+*/
+static char ESP8266_consta_check(void)
+{
+	char *p;
+	char res;
+	ESP8266_quit_trans(); // 退出透传 
+	//发送AT+CIPSTATUS指令,查询连接状态
+	ESP8266_send_cmd("AT+CIPSTATUS",":",50);	
+	p=ESP8266_check_cmd("+CIPSTATUS:"); 
+	res=*p;
+	return res;
+}
+/**
+	* @brief  获取Client ip地址
+	* @param  ipbuf: ip地址输出缓存区
+  * @retval None
+  * @note   None
+*/
+static void ESP8266_get_wanip(char* ipbuf)
+{
+	char *p,*p1;
+	//获取WAN IP地址失败
+	if(ESP8266_send_cmd("AT+CIFSR","OK",50))
+	{
+		ipbuf[0]=0;
+		return;
+	}		
+	p=ESP8266_check_cmd("\"");
+	p1=(char*)strstr((const char*)(p+1),"\"");
+	*p1=0;
+	sprintf((char*)ipbuf,"%s",p+1);	
+}
+/**
+	* @brief  删除指定字符并重组
+	* @param  str[]: 要修改的字符串
+	* @param  target: 要删除的字符
+  * @retval None
+  * @note   None
+*/
+void Delete_char(char str[],char target)
+{
+	int i,j;
+	for(i=0, j=0; i < strlen(str); i++)
+	{
+		if(str[i] != target)
+		{
+			str[j++] = str[i];
+		}
+		// printf("J:%c I:%c\n", str[j-1], str[i]);
+	}
+	str[j] = '\0';
+}
+/**
+	* @brief  WIFI复位引脚配置
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void WIFI_RESET_GPIO_Congfig(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(GPIOA, &GPIO_InitStructure);
+	GPIO_SetBits(GPIOA, GPIO_Pin_1);
+	DelayClass.DelayMs(100);
+	GPIO_ResetBits(GPIOA, GPIO_Pin_1);
+	DelayClass.DelayMs(500);
+	GPIO_SetBits(GPIOA, GPIO_Pin_1);
+	DelayClass.DelayMs(1000);
+}
+/**
+	* @brief  连接WIFI
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void Connect_wifi(void)
+{
+	char p[40];
+
+	#ifdef DEBUG_printf
+	printf("1. AT\n");
+	#endif
+	while(ESP8266_send_cmd("AT+CWMODE=1\r\n","OK",100));		//设置WIFI STA模式
+	#ifdef DEBUG_printf
+	printf("2. AT+CWMODE=1\n");
+	#endif
+	while(ESP8266_send_cmd("AT+CIPMUX=0\r\n","OK",100));   //0：单连接，1：多连接
+	#ifdef DEBUG_printf
+	printf("3. AT+CIPMUX=0\n");
+	#endif
+	sprintf((char*)p,"AT+CWJAP=\"%s\",\"%s\"\r\n",WIFI_id,WIFI_password);//设置无线参数:ssid,密码
+	while(ESP8266_send_cmd(p,"GOT IP",200));  //连接目标路由器,并且获得IP
+	#ifdef DEBUG_printf
+	printf("4. WIFI CONNECT\n");
+	#endif
+}
+/**
+	* @brief  获取实时天气
+	* @param  None
+  * @retval None
+  * @note   心知天气API格式
+*/
+void Connect_wea_port(void)
+{
+	char p[40];
+	char res;
+	ESP8266_send_cmd("AT+CIPCLOSE\r\n","OK",50);
+	sprintf((char*)p,"AT+CIPSTART=\"TCP\",\"116.62.81.138\",80\r\n");
+	res = ESP8266_send_cmd(p,"CONNECT",200);
+	if(res) 
+	{
+		#ifdef DEBUG_printf
+		printf("conncet weather failed\n");
+		#endif
+	} 
+	else 
+	{
+		#ifdef DEBUG_printf
+		printf("connect weather successed\n");
+		#endif
+	}
+	ESP8266_send_cmd("AT+CIPMODE=1\r\n","OK",100);
+	res = ESP8266_send_cmd("AT+CIPSEND\r\n","OK",100);
+	if(res)
+	{	
+		#ifdef DEBUG_printf
+		printf("weather data error\n");
+		#endif
+	}
+	else
+	{
+		#ifdef DEBUG_printf
+		printf("weather data start\n");
+		#endif
+	}
+	ESP8266_clear();   //清空
+	WIFI_sendData("GET https://api.seniverse.com/v3/weather/now.json?key=SKrmB3PfnSu2lVCR6&location=zhengzhou&language=zh-Hans&unit=c\r\n");
+	DelayClass.DelayMs(500);
+	if(WIFI_USART_RX_STA&0X8000)		//此时再次接到一次数据，为天气的数据
+	{ 
+		WIFI_USART_RX_BUF[WIFI_USART_RX_STA&0X7FFF]=0;//添加结束符
+		#ifdef DEBUG_printf
+		printf("%s\n",WIFI_USART_RX_BUF);
+		#endif
+	}
+}
+/**
+	* @brief  获取实时时间
+	* @param  None
+  * @retval None
+  * @note   NowAPI格式
+*/
+void Connect_time_port(void)
+{
+	char pp[40];
+	char res;
+	ESP8266_send_cmd("AT+CIPCLOSE\r\n","OK",50);
+	sprintf((char*)pp,"AT+CIPSTART=\"TCP\",\"103.205.5.134\",88\r\n");
+	res = ESP8266_send_cmd(pp,"CONNECT\r\n",200);
+	if(res) 
+	{
+		#ifdef DEBUG_printf
+		printf("conncet time failed\n");
+		#endif
+	} 
+	else 
+	{
+		#ifdef DEBUG_printf
+		printf("connect time successed\n");
+		#endif
+	}
+	ESP8266_send_cmd("AT+CIPMODE=1\r\n","OK",100);
+	res = ESP8266_send_cmd("AT+CIPSEND\r\n","OK",100);
+	if(res)
+	{	
+		#ifdef DEBUG_printf
+		printf("time data error\n");
+		#endif
+	}
+	else
+	{
+		#ifdef DEBUG_printf
+		printf("time data start\n");
+		#endif
+	}
+	ESP8266_clear();   //清空
+	WIFI_sendData("GET http://api.k780.com:88/?app=life.time&appkey=64669&sign=f6114926ae7705fce3e2eabc4779495b&format=json\r\n");
+	DelayClass.DelayMs(500);
+	if(WIFI_USART_RX_STA&0X8000)		//此时再次接到一次数据，为json的数据
+	{ 
+		WIFI_USART_RX_BUF[WIFI_USART_RX_STA&0X7FFF]=0;//添加结束符
+		#ifdef DEBUG_printf
+		printf("%s\n",WIFI_USART_RX_BUF);
+		#endif
+	}
+}
+

module_Template/WIFIGetAPI/WIFI_func.h

@@ -0,0 +1,17 @@
+#ifndef __WIFI_FUNC_H
+#define __WIFI_FUNC_H
+
+#include "main.h"
+
+void ESP8266_clear(void);
+void ESP8266_quit_trans(void); 
+void Delete_char(char str[],char target);
+void WIFI_RESET_GPIO_Congfig(void);
+void Connect_wifi(void);
+void Connect_wea_port(void);
+void Connect_time_port(void);
+
+#endif
+
+
+

module_Template/WIFIGetAPI/WIFI_handle.c

@@ -0,0 +1,276 @@
+#include "main.h"
+//#include "WIFI_config.h"
+//#include "WIFI_func.h"
+//#include "cJSON.h"
+
+static uint8_t weatherCJSON_handle(char s[], WIFIWeatherStruct *WIFIWeather1);
+static uint8_t timeCJSONToString(char s[], uint8_t *timeBuff1, uint8_t hexOrDec1);
+static void timeJsonTotimeInt(char *str1, uint8_t *timeBuff2, uint8_t hexOrDec2);
+static int stringToInt(char *str);
+
+
+/**
+  * @brief  WIFI初始化
+  * @param  None
+  * @retval None
+  * @note   None
+	*/
+void WIFI_Init(void)
+{
+	mem_init();
+	WIFI_USART_Init(115200);
+	WIFI_TIM3_Init();
+}
+/**
+  * @brief  WIFI联网
+  * @param  None
+  * @retval None
+  * @note   None
+	*/
+void WIFI_Connect(void)
+{
+	WIFI_RESET_GPIO_Congfig();
+	ESP8266_clear();
+	ESP8266_quit_trans(); // 关闭透传与TCP模式
+	Connect_wifi();
+}
+/**
+  * @brief  WIFI联网获取实时时间数据
+	* @param  timeBuff: 时间存放地址
+	* @param  hexOrDec: 转化为十六进制表示还是十进制表示 输入16或10
+	* @retval 0: 解析成功
+  * @note   None
+	*/
+uint8_t WIFI_RealTime_handle(uint8_t *timeBuff, uint8_t hexOrDec)
+{
+	uint8_t result = 1;
+	Connect_time_port();
+	result = timeCJSONToString(WIFI_USART_RX_BUF, timeBuff, hexOrDec);
+	ESP8266_quit_trans(); // 必须放在解析数据之后
+	return result;
+}
+/**
+  * @brief  WIFI联网获取实时天气数据
+  * @param  None
+  * @retval None
+  * @note   None
+	*/
+uint8_t WIFI_realWeather_handle(WIFIWeatherStruct *WIFIWeather1)
+{
+	uint8_t result = 1;
+	Connect_wea_port();
+	result = weatherCJSON_handle(WIFI_USART_RX_BUF, WIFIWeather1);
+	ESP8266_quit_trans(); // 必须放在解析数据之后
+	return result;
+}
+/**
+  * @brief  WIFI天气CJSON数据处理
+  * @param  None
+  * @retval None
+  * @note   将CJSON数据转换为可用数据格式
+	*/
+static uint8_t weatherCJSON_handle(char s[], WIFIWeatherStruct *WIFIWeather2)
+{
+	uint8_t result = 1;
+	char t[] ="[";
+	char r[] ="]";
+	cJSON *res,*location, *tq ,*qw, *name, *now;
+	cJSON *cjson;
+	Delete_char(s,t[0]);
+	Delete_char(s,r[0]);
+	cjson = cJSON_Parse(s);
+	if(cjson)
+	{
+		res = cJSON_GetObjectItem(cjson, "results");
+		location = cJSON_GetObjectItem(res, "location");
+		name = cJSON_GetObjectItem(location, "name");
+		now = cJSON_GetObjectItem(res, "now");
+		tq = cJSON_GetObjectItem(now, "code");
+		qw = cJSON_GetObjectItem(now, "temperature");
+		WIFIWeather2->weatherCode = stringToInt(tq->valuestring);
+		WIFIWeather2->weatherTemp[0] = *(qw->valuestring);
+		WIFIWeather2->weatherTemp[1] = *((qw->valuestring) + 1);
+		WIFIWeather2->weatherTemp[2] = '\0';
+		if(WIFIWeather2->weatherTemp[0] < '0') WIFIWeather2->tempNum = 0;
+		else WIFIWeather2->tempNum = stringToInt(qw->valuestring);
+		result = 0;
+#ifdef DEBUG_printf
+	printf("cityName is %s\n",name->valuestring);
+	printf("tianqi is %s\n",tq->valuestring);
+	printf("tem is %s\n",qw->valuestring);
+#endif
+	}
+	cJSON_Delete(cjson);
+	myfree(s);
+	return result;
+}
+/**
+  * @brief  时间json转string
+	* @param  s[]:json数据
+	* @param  timeBuff1: 时间存放地址
+	* @param  hexOrDec1: 转化为十六进制表示还是十进制表示 输入16或10
+	* @retval 0: 解析成功
+  * @note   None
+*/
+static uint8_t timeCJSONToString(char s[], uint8_t *timeBuff1, uint8_t hexOrDec1)
+{
+	uint8_t result = 1;
+	cJSON *res, *time, *week;
+	cJSON *cjson;
+	cjson = cJSON_Parse(s);
+	if(cjson)
+	{
+		res = cJSON_GetObjectItem(cjson, "result");
+		time = cJSON_GetObjectItem(res, "datetime_1");
+		week = cJSON_GetObjectItem(res, "week_1");
+		if(stringToInt(week->valuestring) == 0) {
+			WIFITimeData[7] = 0x07;
+		} else {
+			WIFITimeData[7] = stringToInt(week->valuestring);
+		}
+		// 解析为int方便初始化DS1302
+		timeJsonTotimeInt(time->valuestring, timeBuff1, hexOrDec1);
+		result = 0;
+#ifdef DEBUG_printf
+		printf("WIFI time: datetime is %s; week is %s\n", time->valuestring, week->valuestring);
+#endif
+	}
+	cJSON_Delete(cjson);
+	myfree(s);
+	return result;
+}
+
+/**
+  * @brief  解析json数据中的time
+	* @param  str1:字符串地址
+	* @param  timeBuff2: 时间存放地址
+	* @param  hexOrDec2: 转化为十六进制表示还是十进制表示 输入16或10
+  * @retval None
+  * @note   None
+*/
+static void timeJsonTotimeInt(char *str1, uint8_t *timeBuff2, uint8_t hexOrDec2)
+{
+	char *str = str1;
+	char temp[5];
+	char i = 0,j = 0;
+	int timeTemp = 0;
+	memset(temp, 0, sizeof(temp)/sizeof(temp[0]));
+	for(j = 0; j < 6; j ++) {
+		while(*str != '-' && *str != ' ' && *str != ':') {
+			if(*str == '\0') break;
+			temp[i] = *str;
+			i++;
+			str++;
+		}
+		timeTemp = stringToInt(temp);
+		switch(j) {
+			case 0:
+				timeBuff2[0] = timeTemp/100/10*hexOrDec2 + timeTemp/100%10;
+				timeBuff2[1] = timeTemp%100/10*hexOrDec2 + timeTemp%100%10;
+				break;
+			case 1:
+				timeBuff2[2] = timeTemp/10*hexOrDec2 + timeTemp%10;
+				break;
+			case 2:
+				timeBuff2[3] = timeTemp/10*hexOrDec2 + timeTemp%10;
+				break;
+			case 3:
+				timeBuff2[4] = timeTemp/10*hexOrDec2 + timeTemp%10;
+				break;
+			case 4:
+				timeBuff2[5] = timeTemp/10*hexOrDec2 + timeTemp%10;
+				break;
+			case 5:
+				timeBuff2[6] = timeTemp/10*hexOrDec2 + timeTemp%10 + 2; // 加2s补时
+				break;
+		}
+		memset(temp, 0, sizeof(temp)/sizeof(temp[0]));
+		i = 0;
+		str++;
+	}
+#ifdef DEBUG_printf
+	if(hexOrDec2 == 16)
+	{
+		printf("timeBuff: %x%x-%x-%x %x:%x:%x %x\n", timeBuff2[0], timeBuff2[1], timeBuff2[2], timeBuff2[3], timeBuff2[4], timeBuff2[5], timeBuff2[6], timeBuff2[7]);
+	}
+	else if(hexOrDec2 == 10)
+	{
+		printf("timeBuff: %d%d-%d-%d %d:%d:%d %d\n", timeBuff2[0], timeBuff2[1], timeBuff2[2], timeBuff2[3], timeBuff2[4], timeBuff2[5], timeBuff2[6], timeBuff2[7]);
+	}
+	#endif
+}
+/**
+  * @brief  string转换int
+	* @param  *str:字符串地址
+  * @retval 返回int型
+  * @note   None
+*/
+static int stringToInt(char *str)
+{
+	char *p = str;
+	int nNUM = 0;
+	
+	while (*p != '\0')
+	{
+		nNUM = nNUM * 10 + (*p - '0');
+		p++;
+	}
+	return nNUM;
+}
+/**
+  * @brief  根据天气代码显示天气情况
+	* @param  temp:天气代码
+  * @retval None
+  * @note   None
+*/
+void tianqiDisplay(uint8_t weatherCode)
+{
+	uint8_t x1 = 48;
+	uint8_t x2 = 64;
+	uint8_t y = 4;
+	if(weatherCode <= 3) {
+		OLED_ShowChinese(x1,y,27); // 晴
+		OLED_ShowString(x2,y,"  ",16);
+	} else if(weatherCode <= 8) {
+		OLED_ShowChinese(x1,y,28); // 多云
+		OLED_ShowChinese(x2,y,29);
+	} else if(weatherCode == 9) {
+		OLED_ShowChinese(x1,y,30); // 阴
+		OLED_ShowString(x2,y,"  ",16);
+	} else if(weatherCode == 10) {
+		OLED_ShowChinese(x1,y,36); // 阵雨
+		OLED_ShowChinese(x2,y,31);
+	} else if(weatherCode <= 12) {
+		OLED_ShowChinese(x1,y,35); // 雷雨
+		OLED_ShowChinese(x2,y,31);
+	} else if(weatherCode == 13) {
+		OLED_ShowChinese(x1,y,34); // 小雨
+		OLED_ShowChinese(x2,y,31);
+	} else if(weatherCode == 14) {
+		OLED_ShowChinese(x1,y,33); // 中雨
+		OLED_ShowChinese(x2,y,31);
+	} else if(weatherCode <= 19) {
+		OLED_ShowChinese(x1,y,32); // 大雨
+		OLED_ShowChinese(x2,y,31);
+	} else if(weatherCode <= 21) {
+		OLED_ShowChinese(x1,y,36); // 阵雪
+		OLED_ShowChinese(x2,y,39);
+	} else if(weatherCode == 22) {
+		OLED_ShowChinese(x1,y,34); // 小雪
+		OLED_ShowChinese(x2,y,39);
+	} else if(weatherCode == 23) {
+		OLED_ShowChinese(x1,y,33); // 中雪
+		OLED_ShowChinese(x2,y,39);
+	} else if(weatherCode <= 25) {
+		OLED_ShowChinese(x1,y,32); // 大雪
+		OLED_ShowChinese(x2,y,39);
+	} else if(weatherCode == 30) {
+		OLED_ShowChinese(x1,y,37); // 雾
+		OLED_ShowString(x2,y,"  ",16);
+	} else if(weatherCode == 31) {
+		OLED_ShowChinese(x1,y,38); // 霾
+		OLED_ShowString(x2,y,"  ",16);
+	} else {
+		OLED_ShowString(x1,y,"N/A ",16); // N/A
+	}
+}

module_Template/WIFIGetAPI/WIFI_handle.h

@@ -0,0 +1,31 @@
+#ifndef _WIFI_HANDLE_H
+#define _WIFI_HANDLE_H
+
+#include "main.h"	
+
+//// ʱ¼ä½á¹¹Ìå
+//typedef struct {
+//	uint16_t year;
+//	uint8_t  month;
+//	uint8_t  day;
+//	uint8_t  hour;
+//	uint8_t  minute;
+//	uint8_t  second;
+//	uint8_t  week;
+//} WIFITimeStruct;
+
+// ÌìÆø½á¹¹Ìå
+typedef struct {
+	uint8_t weatherCode;
+	char weatherTemp[3];
+	uint8_t tempNum;
+}WIFIWeatherStruct;
+
+
+void WIFI_Init(void);
+void WIFI_Connect(void);
+uint8_t WIFI_RealTime_handle(uint8_t *timeBuff, uint8_t hexOrDec);
+uint8_t WIFI_realWeather_handle(WIFIWeatherStruct *WIFIWeather1);
+void tianqiDisplay(uint8_t weatherCode);
+
+#endif

module_Template/WIFIGetAPI/cJSON.c

@@ -0,0 +1,280 @@
+/* cJSON */
+/* JSON parser in C. */
+#include "main.h"
+//#include <string.h>
+//#include <stdio.h>
+//#include <math.h>
+//#include <stdlib.h>
+//#include <float.h>
+//#include <limits.h>
+//#include <ctype.h>
+//#include <stddef.h>
+//#include "cJSON.h"
+//#include "myMalloc.h"
+
+static const char *ep;
+
+static int cJSON_strcasecmp(const char *s1,const char *s2)
+{
+	if (!s1) return (s1==s2)?0:1;if (!s2) return 1;
+	for(; tolower(*s1) == tolower(*s2); ++s1, ++s2)	if(*s1 == 0)	return 0;
+	return tolower(*(const unsigned char *)s1) - tolower(*(const unsigned char *)s2);
+}
+// Óû§µÄÄÚ´æ¹ÜÀíº¯Êý
+static void *(*cJSON_malloc)(size_t sz) = mymalloc;
+static void (*cJSON_free)(void *ptr) = myfree;
+
+/* Internal constructor. */
+static cJSON *cJSON_New_Item(void)
+{
+	cJSON* node = (cJSON*)cJSON_malloc(sizeof(cJSON));
+	if (node) memset(node,0,sizeof(cJSON));
+	return node;
+}
+
+/* Delete a cJSON structure. */
+void cJSON_Delete(cJSON *c)
+{
+	cJSON *next;
+	while (c)
+	{
+		next=c->next;
+		if (!(c->type&cJSON_IsReference) && c->child) cJSON_Delete(c->child);
+		if (!(c->type&cJSON_IsReference) && c->valuestring) cJSON_free(c->valuestring);
+		if (c->string) cJSON_free(c->string);
+		cJSON_free(c);
+		c=next;
+	}
+}
+
+/* Parse the input text to generate a number, and populate the result into item. */
+static const char *parse_number(cJSON *item,const char *num)
+{
+	double n=0,sign=1,scale=0;int subscale=0,signsubscale=1;
+
+	if (*num=='-') sign=-1,num++;	/* Has sign? */
+	if (*num=='0') num++;			/* is zero */
+	if (*num>='1' && *num<='9')	do	n=(n*10.0)+(*num++ -'0');	while (*num>='0' && *num<='9');	/* Number? */
+	if (*num=='.' && num[1]>='0' && num[1]<='9') {num++;		do	n=(n*10.0)+(*num++ -'0'),scale--; while (*num>='0' && *num<='9');}	/* Fractional part? */
+	if (*num=='e' || *num=='E')		/* Exponent? */
+	{	num++;if (*num=='+') num++;	else if (*num=='-') signsubscale=-1,num++;		/* With sign? */
+		while (*num>='0' && *num<='9') subscale=(subscale*10)+(*num++ - '0');	/* Number? */
+	}
+
+	n=sign*n*pow(10.0,(scale+subscale*signsubscale));	/* number = +/- number.fraction * 10^+/- exponent */
+	
+	item->valuedouble=n;
+	item->valueint=(int)n;
+	item->type=cJSON_Number;
+	return num;
+}
+
+/* Render the number nicely from the given item into a string. */
+static char *print_number(cJSON *item)
+{
+	char *str;
+	double d=item->valuedouble;
+	if (fabs(((double)item->valueint)-d)<=DBL_EPSILON && d<=INT_MAX && d>=INT_MIN)
+	{
+		str=(char*)cJSON_malloc(21);	/* 2^64+1 can be represented in 21 chars. */
+		if (str) sprintf(str,"%d",item->valueint);
+	}
+	else
+	{
+		str=(char*)cJSON_malloc(64);	/* This is a nice tradeoff. */
+		if (str)
+		{
+			if (fabs(floor(d)-d)<=DBL_EPSILON && fabs(d)<1.0e60)sprintf(str,"%.0f",d);
+			else if (fabs(d)<1.0e-6 || fabs(d)>1.0e9)			sprintf(str,"%e",d);
+			else												sprintf(str,"%f",d);
+		}
+	}
+	return str;
+}
+
+static unsigned parse_hex4(const char *str)
+{
+	unsigned h=0;
+	if (*str>='0' && *str<='9') h+=(*str)-'0'; else if (*str>='A' && *str<='F') h+=10+(*str)-'A'; else if (*str>='a' && *str<='f') h+=10+(*str)-'a'; else return 0;
+	h=h<<4;str++;
+	if (*str>='0' && *str<='9') h+=(*str)-'0'; else if (*str>='A' && *str<='F') h+=10+(*str)-'A'; else if (*str>='a' && *str<='f') h+=10+(*str)-'a'; else return 0;
+	h=h<<4;str++;
+	if (*str>='0' && *str<='9') h+=(*str)-'0'; else if (*str>='A' && *str<='F') h+=10+(*str)-'A'; else if (*str>='a' && *str<='f') h+=10+(*str)-'a'; else return 0;
+	h=h<<4;str++;
+	if (*str>='0' && *str<='9') h+=(*str)-'0'; else if (*str>='A' && *str<='F') h+=10+(*str)-'A'; else if (*str>='a' && *str<='f') h+=10+(*str)-'a'; else return 0;
+	return h;
+}
+
+/* Parse the input text into an unescaped cstring, and populate item. */
+static const unsigned char firstByteMark[7] = { 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC };
+static const char *parse_string(cJSON *item,const char *str)
+{
+	const char *ptr=str+1;char *ptr2;char *out;int len=0;unsigned uc,uc2;
+	if (*str!='\"') {ep=str;return 0;}	/* not a string! */
+	
+	while (*ptr!='\"' && *ptr && ++len) if (*ptr++ == '\\') ptr++;	/* Skip escaped quotes. */
+	
+	out=(char*)cJSON_malloc(len+1);	/* This is how long we need for the string, roughly. */
+	if (!out) return 0;
+	
+	ptr=str+1;ptr2=out;
+	while (*ptr!='\"' && *ptr)
+	{
+		if (*ptr!='\\') *ptr2++=*ptr++;
+		else
+		{
+			ptr++;
+			switch (*ptr)
+			{
+				case 'b': *ptr2++='\b';	break;
+				case 'f': *ptr2++='\f';	break;
+				case 'n': *ptr2++='\n';	break;
+				case 'r': *ptr2++='\r';	break;
+				case 't': *ptr2++='\t';	break;
+				case 'u':	 /* transcode utf16 to utf8. */
+					uc=parse_hex4(ptr+1);ptr+=4;	/* get the unicode char. */
+
+					if ((uc>=0xDC00 && uc<=0xDFFF) || uc==0)	break;	/* check for invalid.	*/
+
+					if (uc>=0xD800 && uc<=0xDBFF)	/* UTF16 surrogate pairs.	*/
+					{
+						if (ptr[1]!='\\' || ptr[2]!='u')	break;	/* missing second-half of surrogate.	*/
+						uc2=parse_hex4(ptr+3);ptr+=6;
+						if (uc2<0xDC00 || uc2>0xDFFF)		break;	/* invalid second-half of surrogate.	*/
+						uc=0x10000 + (((uc&0x3FF)<<10) | (uc2&0x3FF));
+					}
+
+					len=4;if (uc<0x80) len=1;else if (uc<0x800) len=2;else if (uc<0x10000) len=3; ptr2+=len;
+					
+					switch (len) {
+						case 4: *--ptr2 =((uc | 0x80) & 0xBF); uc >>= 6;
+						case 3: *--ptr2 =((uc | 0x80) & 0xBF); uc >>= 6;
+						case 2: *--ptr2 =((uc | 0x80) & 0xBF); uc >>= 6;
+						case 1: *--ptr2 =(uc | firstByteMark[len]);
+					}
+					ptr2+=len;
+					break;
+				default:  *ptr2++=*ptr; break;
+			}
+			ptr++;
+		}
+	}
+	*ptr2=0;
+	if (*ptr=='\"') ptr++;
+	item->valuestring=out;
+	item->type=cJSON_String;
+	return ptr;
+}
+
+///* Predeclare these prototypes. */
+static const char *parse_value(cJSON *item,const char *value);
+//static char *print_value(cJSON *item,int depth,int fmt);
+static const char *parse_array(cJSON *item,const char *value);
+//static char *print_array(cJSON *item,int depth,int fmt);
+static const char *parse_object(cJSON *item,const char *value);
+//static char *print_object(cJSON *item,int depth,int fmt);
+
+/* Utility to jump whitespace and cr/lf */
+static const char *skip(const char *in) {while (in && *in && (unsigned char)*in<=32) in++; return in;}
+
+/* Parse an object - create a new root, and populate. */
+cJSON *cJSON_ParseWithOpts(const char *value,const char **return_parse_end,int require_null_terminated)
+{
+	const char *end=0;
+	cJSON *c=cJSON_New_Item();
+	ep=0;
+	if (!c) return 0;       /* memory fail */
+
+	end=parse_value(c,skip(value));
+	if (!end)	{cJSON_Delete(c);return 0;}	/* parse failure. ep is set. */
+
+	/* if we require null-terminated JSON without appended garbage, skip and then check for a null terminator */
+	if (require_null_terminated) {end=skip(end);if (*end) {cJSON_Delete(c);ep=end;return 0;}}
+	if (return_parse_end) *return_parse_end=end;
+	return c;
+}
+/* Default options for cJSON_Parse */
+cJSON *cJSON_Parse(const char *value) {return cJSON_ParseWithOpts(value,0,0);}
+
+/* Parser core - when encountering text, process appropriately. */
+static const char *parse_value(cJSON *item,const char *value)
+{
+	if (!value)						return 0;	/* Fail on null. */
+	if (!strncmp(value,"null",4))	{ item->type=cJSON_NULL;  return value+4; }
+	if (!strncmp(value,"false",5))	{ item->type=cJSON_False; return value+5; }
+	if (!strncmp(value,"true",4))	{ item->type=cJSON_True; item->valueint=1;	return value+4; }
+	if (*value=='\"')				{ return parse_string(item,value); }
+	if (*value=='-' || (*value>='0' && *value<='9'))	{ return parse_number(item,value); }
+	if (*value=='[')				{ return parse_array(item,value); }
+	if (*value=='{')				{ return parse_object(item,value); }
+
+	ep=value;return 0;	/* failure. */
+}
+
+/* Build an array from input text. */
+static const char *parse_array(cJSON *item,const char *value)
+{
+	cJSON *child;
+	if (*value!='[')	{ep=value;return 0;}	/* not an array! */
+
+	item->type=cJSON_Array;
+	value=skip(value+1);
+	if (*value==']') return value+1;	/* empty array. */
+
+	item->child=child=cJSON_New_Item();
+	if (!item->child) return 0;		 /* memory fail */
+	value=skip(parse_value(child,skip(value)));	/* skip any spacing, get the value. */
+	if (!value) return 0;
+
+	while (*value==',')
+	{
+		cJSON *new_item;
+		if (!(new_item=cJSON_New_Item())) return 0; 	/* memory fail */
+		child->next=new_item;new_item->prev=child;child=new_item;
+		value=skip(parse_value(child,skip(value+1)));
+		if (!value) return 0;	/* memory fail */
+	}
+
+	if (*value==']') return value+1;	/* end of array */
+	ep=value;return 0;	/* malformed. */
+}
+
+/* Build an object from the text. */
+static const char *parse_object(cJSON *item,const char *value)
+{
+	cJSON *child;
+	if (*value!='{')	{ep=value;return 0;}	/* not an object! */
+	
+	item->type=cJSON_Object;
+	value=skip(value+1);
+	if (*value=='}') return value+1;	/* empty array. */
+	
+	item->child=child=cJSON_New_Item();
+	if (!item->child) return 0;
+	value=skip(parse_string(child,skip(value)));
+	if (!value) return 0;
+	child->string=child->valuestring;child->valuestring=0;
+	if (*value!=':') {ep=value;return 0;}	/* fail! */
+	value=skip(parse_value(child,skip(value+1)));	/* skip any spacing, get the value. */
+	if (!value) return 0;
+	
+	while (*value==',')
+	{
+		cJSON *new_item;
+		if (!(new_item=cJSON_New_Item()))	return 0; /* memory fail */
+		child->next=new_item;new_item->prev=child;child=new_item;
+		value=skip(parse_string(child,skip(value+1)));
+		if (!value) return 0;
+		child->string=child->valuestring;child->valuestring=0;
+		if (*value!=':') {ep=value;return 0;}	/* fail! */
+		value=skip(parse_value(child,skip(value+1)));	/* skip any spacing, get the value. */
+		if (!value) return 0;
+	}
+	
+	if (*value=='}') return value+1;	/* end of array */
+	ep=value;return 0;	/* malformed. */
+}
+
+cJSON *cJSON_GetObjectItem(cJSON *object,const char *string)	{cJSON *c=object->child; while (c && cJSON_strcasecmp(c->string,string)) c=c->next; return c;}
+
+

module_Template/WIFIGetAPI/cJSON.h

@@ -0,0 +1,50 @@
+#ifndef cJSON__h
+#define cJSON__h
+
+#include "main.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* cJSON Types: */
+#define cJSON_False 0
+#define cJSON_True 1
+#define cJSON_NULL 2
+#define cJSON_Number 3
+#define cJSON_String 4
+#define cJSON_Array 5
+#define cJSON_Object 6
+#define cJSON_IsReference 256
+
+/* The cJSON structure: */
+typedef struct cJSON {
+	struct cJSON *next,*prev;	/* next/prev allow you to walk array/object chains. Alternatively, use GetArraySize/GetArrayItem/GetObjectItem */
+	struct cJSON *child;		/* An array or object item will have a child pointer pointing to a chain of the items in the array/object. */
+
+	int type;					/* The type of the item, as above. */
+	char *valuestring;			/* The item's string, if type==cJSON_String */
+	int valueint;				/* The item's number, if type==cJSON_Number */
+	double valuedouble;			/* The item's number, if type==cJSON_Number */
+
+	char *string;				/* The item's name string, if this item is the child of, or is in the list of subitems of an object. */
+} cJSON;
+
+/* Supply a block of JSON, and this returns a cJSON object you can interrogate. Call cJSON_Delete when finished. */
+extern cJSON *cJSON_Parse(const char *value);
+/* Delete a cJSON entity and all subentities. */
+extern void   cJSON_Delete(cJSON *c);
+
+/* Get item "string" from object. Case insensitive. */
+extern cJSON *cJSON_GetObjectItem(cJSON *object,const char *string);
+
+/* ParseWithOpts allows you to require (and check) that the JSON is null terminated, and to retrieve the pointer to the final byte parsed. */
+extern cJSON *cJSON_ParseWithOpts(const char *value,const char **return_parse_end,int require_null_terminated);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

module_Template/WIFIGetAPI/myMalloc.c

@@ -0,0 +1,169 @@
+#include "main.h"
+
+static void mymemcpy(void *des,void *src,uint32_t n);
+static void mymemset(void *s,uint8_t c,uint32_t count);
+static uint8_t mem_perused(void);
+
+#ifndef NULL
+#define NULL 0
+#endif
+#define MEM_BLOCK_SIZE			  32  	  					          	//内存块大小为32字节
+#define MEM_MAX_SIZE			    2048  						        		//最大管理内存 2K
+#define MEM_ALLOC_TABLE_SIZE	MEM_MAX_SIZE/MEM_BLOCK_SIZE 	//内存表大小
+
+//内存池(4字节对齐)
+__align(4) uint8_t membase[MEM_MAX_SIZE];							//内部SRAM内存池
+//内存管理表
+uint16_t memmapbase[MEM_ALLOC_TABLE_SIZE];						//内部SRAM内存池MAP
+//内存管理参数	   
+const uint32_t memtblsize = MEM_ALLOC_TABLE_SIZE;			//内存表大小
+const uint32_t memblksize = MEM_BLOCK_SIZE;						//内存分块大小
+const uint32_t memsize    = MEM_MAX_SIZE;							//内存总大小
+
+//内存管理控制器
+struct _m_mallco_dev mallco_dev=
+{
+	mem_init,				//内存初始化
+	mem_perused,	  //内存使用率
+	membase,		    //内存池
+	memmapbase,     //内存管理状态表
+	0,  					  //内存管理未就绪
+};
+
+//复制内存
+//*des:目的地址
+//*src:源地址
+//n:需要复制的内存长度(字节为单位)
+static void mymemcpy(void *des,void *src,uint32_t n)  
+{  
+  uint8_t *xdes=des;
+	uint8_t *xsrc=src; 
+  while(n--)*xdes++=*xsrc++;  
+}  
+
+//设置内存
+//*s:内存首地址
+//c :要设置的值
+//count:需要设置的内存大小(字节为单位)
+static void mymemset(void *s,uint8_t c,uint32_t count)  
+{  
+    uint8_t *xs = s;  
+    while(count--)*xs++=c;  
+}	
+ 
+//获取内存使用率
+//memx:所属内存块
+//返回值:使用率(0~100)
+static uint8_t mem_perused(void)  
+{  
+    uint32_t used=0;  
+    uint32_t i;  
+    for(i=0;i<memtblsize;i++)  
+    {  
+        if(mallco_dev.memmap[i])used++; 
+    } 
+    return (used*100)/(memtblsize);  
+}  
+
+//内存分配(内部调用)
+//memx:所属内存块
+//size:要分配的内存大小(字节)
+//返回值:0XFFFFFFFF,代表错误;其他,内存偏移地址 
+static uint32_t mem_malloc(uint32_t size)  
+{  
+    signed long offset=0;  
+    uint16_t nmemb;	//需要的内存块数  
+	uint16_t cmemb=0;//连续空内存块数
+    uint32_t i;  
+    if(!mallco_dev.memrdy)mallco_dev.init();//未初始化,先执行初始化 
+    if(size==0)return 0XFFFFFFFF;//不需要分配
+
+    nmemb=size/memblksize;  	//获取需要分配的连续内存块数
+    if(size%memblksize)nmemb++;  
+    for(offset=memtblsize-1;offset>=0;offset--)//搜索整个内存控制区  
+    {     
+		if(!mallco_dev.memmap[offset])cmemb++;//连续空内存块数增加
+		else cmemb=0;								//连续内存块清零
+		if(cmemb==nmemb)							//找到了连续nmemb个空内存块
+		{
+            for(i=0;i<nmemb;i++)  					//标注内存块非空 
+            {  
+                mallco_dev.memmap[offset+i]=nmemb;  
+            }  
+            return (offset*memblksize);//返回偏移地址  
+		}
+    }  
+    return 0XFFFFFFFF;//未找到符合分配条件的内存块  
+}  
+
+//释放内存(内部调用) 
+//memx:所属内存块
+//offset:内存地址偏移
+//返回值:0,释放成功;1,释放失败;  
+static uint8_t mem_free(uint32_t offset)  
+{  
+    int i;  
+    if(!mallco_dev.memrdy)//未初始化,先执行初始化
+	{
+		mallco_dev.init();    
+        return 1;//未初始化  
+    }  
+    if(offset<memsize)//偏移在内存池内. 
+    {  
+        int index=offset/memblksize;			//偏移所在内存块号码  
+        int nmemb=mallco_dev.memmap[index];	//内存块数量
+        for(i=0;i<nmemb;i++)  						//内存块清零
+        {  
+            mallco_dev.memmap[index+i]=0;  
+        }  
+        return 0;  
+    }else return 2;//偏移超区了.  
+}  
+//内存管理初始化  
+//memx:所属内存块
+void mem_init(void)  
+{  
+  mymemset(mallco_dev.memmap, 0,memtblsize*2);//内存状态表数据清零  
+	mymemset(mallco_dev.membase, 0,memsize);	//内存池所有数据清零  
+	mallco_dev.memrdy=1;								//内存管理初始化OK  
+}
+//释放内存(外部调用) 
+//memx:所属内存块
+//ptr:内存首地址 
+void myfree(void *ptr)  
+{  
+	uint32_t offset;  
+    if(ptr==NULL)return;//地址为0.  
+ 	offset=(uint32_t)ptr-(uint32_t)mallco_dev.membase;  
+    mem_free(offset);//释放内存     
+}
+
+//分配内存(外部调用)
+//memx:所属内存块
+//size:内存大小(字节)
+//返回值:分配到的内存首地址.
+void *mymalloc(uint32_t size)  
+{  
+    uint32_t offset;  									      
+	offset=mem_malloc(size);  	   				   
+    if(offset==0XFFFFFFFF)return NULL;  
+    else return (void*)((uint32_t)mallco_dev.membase+offset);  
+}  
+
+//重新分配内存(外部调用)
+//memx:所属内存块
+//*ptr:旧内存首地址
+//size:要分配的内存大小(字节)
+//返回值:新分配到的内存首地址.
+void *myrealloc(void *ptr,uint32_t size)  
+{  
+    uint32_t offset;  
+    offset=mem_malloc(size);  
+    if(offset==0XFFFFFFFF)return NULL;     
+    else  
+    {  									   
+	    mymemcpy((void*)((uint32_t)mallco_dev.membase+offset),ptr,size);	//拷贝旧内存内容到新内存   
+        myfree(ptr);  											  		//释放旧内存
+        return (void*)((uint32_t)mallco_dev.membase+offset);  				//返回新内存首地址
+    }  
+}  

module_Template/WIFIGetAPI/myMalloc.h

@@ -0,0 +1,23 @@
+#ifndef __MYMALLOC_H
+#define __MYMALLOC_H
+
+#include "main.h"
+ 
+//内存管理控制器
+struct _m_mallco_dev
+{
+	void (*init)(void);					//初始化
+	uint8_t   (*perused)(void);		  	    	//内存使用率
+	uint8_t 	  *membase;					//内存池
+	uint16_t   *memmap; 					//内存管理状态表
+	uint8_t     memrdy; 						//内存管理是否就绪
+};
+extern struct _m_mallco_dev mallco_dev;	 //在mallco.c里面定义
+
+void mem_init(void);
+void myfree(void *ptr);
+void *mymalloc(uint32_t size);
+void *myrealloc(void *ptr,uint32_t size);
+#endif
+
+

module_Template/智能健康检测模块/Health.c

@@ -0,0 +1,256 @@
+/*
+智能健康检测模块
+*/
+#include "main.h"	 
+
+static void Health_Rec_Handle(HealthDataStruct *HealthData1);
+static void Health_TIM_Init(void);
+static void Health_USART_Init(void);
+static void Health_Init(void);
+static void Health_Open(void);
+static void Health_Close(void);
+
+HealthClassStruct HealthClass = {
+	.Init = Health_Init,
+	.GetHealthData = Health_Rec_Handle,
+	.Open = Health_Open,
+	.Close = Health_Close
+};
+
+#define Health_MAX_RECV_LEN		128		//	接收缓存大小
+#define Health_MAX_SEND_LEN		1		//  发送缓存大小
+#define Health_RX_EN 					1			//  接收使能标志
+
+// 串口接收和发送缓存区
+unsigned char Health_RX_BUF[Health_MAX_RECV_LEN]; 				
+char Health_TX_BUF[Health_MAX_SEND_LEN]; 				
+// [14:0]: 接收字节数 [15]: 接收完成标志
+volatile uint16_t Health_RX_STA = 0; 
+
+#if 1
+#define  Healthx                   USART1
+#define  Health_CLK                RCC_APB2Periph_USART1
+#define  Health_APBxClkCmd         RCC_APB2PeriphClockCmd
+#define  Health_BAUDRATE           38400
+
+#define  Health_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  Health_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+    
+#define  Health_TX_GPIO_PORT       GPIOA   
+#define  Health_TX_GPIO_PIN        GPIO_Pin_9
+#define  Health_RX_GPIO_PORT       GPIOA
+#define  Health_RX_GPIO_PIN        GPIO_Pin_10
+
+#define  Health_IRQ                USART1_IRQn
+#define  Health_IRQHandler         USART1_IRQHandler
+#else
+#define  Healthx                   USART2
+#define  Health_CLK                RCC_APB1Periph_USART2
+#define  Health_APBxClkCmd         RCC_APB1PeriphClockCmd
+#define  Health_BAUDRATE           115200
+                                        
+#define  Health_GPIO_CLK           (RCC_APB2Periph_GPIOA)
+#define  Health_GPIO_APBxClkCmd    RCC_APB2PeriphClockCmd
+                                        
+#define  Health_TX_GPIO_PORT       GPIOA   
+#define  Health_TX_GPIO_PIN        GPIO_Pin_2
+#define  Health_RX_GPIO_PORT       GPIOA
+#define  Health_RX_GPIO_PIN        GPIO_Pin_3
+                                        
+#define  Health_IRQ                USART2_IRQn
+#define  Health_IRQHandler         USART2_IRQHandler
+#endif  	
+
+/**
+  * @brief  串口中断
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void Health_IRQHandler(void)
+{
+	uint8_t res;	      
+	if(USART_GetITStatus(Healthx, USART_IT_RXNE) != RESET)
+	{	 
+		res =USART_ReceiveData(Healthx);		 
+		if((Health_RX_STA&(1<<15))==0)
+		{ 
+			if(Health_RX_STA<Health_MAX_RECV_LEN)
+			{
+				TIM_SetCounter(TIM3,0);
+				if(Health_RX_STA==0) 
+				{
+					TIM_Cmd(TIM3,ENABLE);
+				}
+				Health_RX_BUF[Health_RX_STA++]=res;	
+			}else 
+			{
+				Health_RX_STA|=1<<15;
+			} 
+		}
+	}  				 											 
+}   
+/**
+  * @brief  TIM3中断
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+void TIM3_IRQHandler(void)
+{ 	
+	if(TIM_GetITStatus(TIM3, TIM_IT_Update) != RESET)
+	{	 			   
+		Health_RX_STA|=1<<15;
+		TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
+		TIM_Cmd(TIM3, DISABLE); 
+	}	    
+}
+/**
+  * @brief  健康检测模块数据处理
+	* @param  None
+  * @retval None
+  * @note   把串口接收到的数据分类存放
+*/
+static void Health_Rec_Handle(HealthDataStruct *HealthData1)
+{
+	// 接收到一次数据了
+	if(Health_RX_STA&0X8000)		
+	{ 
+		// 添加结束符
+		Health_RX_BUF[Health_RX_STA&0X7FFF]=0;
+#ifdef DEBUG_printf
+		//printf("%s\n",Health_RX_BUF);
+#endif
+		// 数据头为0xff且第76字节不为空
+		if((Health_RX_BUF[0] == 0xFF) && (Health_RX_BUF[75]) != 0)
+		{
+			HealthData1->head = Health_RX_BUF[0];
+			uint8_t i = 0;
+			for(i = 0; i <= 64; i++)
+			{
+				HealthData1->heartRateWaveform[i] = Health_RX_BUF[i+1];
+			}
+			HealthData1->heartRate = Health_RX_BUF[65];
+			HealthData1->spo = Health_RX_BUF[66];
+			HealthData1->bk = Health_RX_BUF[67];
+			for(i = 0; i <= 8; i++)
+			{
+				HealthData1->rsv[i] = Health_RX_BUF[i+68];
+			}
+#ifdef DEBUG_printf
+			printf("gaoya: %d diya: %d\n",HealthData1->rsv[3], HealthData1->rsv[4]);
+#endif
+		}
+		// 清空缓存区
+		memset(Health_RX_BUF, 0, Health_MAX_RECV_LEN);
+		// 清除接收标志
+		Health_RX_STA = 0;
+	} 
+}
+/**
+  * @brief  开启检测
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+static void Health_Open(void)
+{
+	USART_SendData(Healthx, 0x8A);
+}
+/**
+  * @brief  关闭检测
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+static void Health_Close(void)
+{
+	USART_SendData(Healthx, 0x88);
+}
+/**
+  * @brief  10ms定时器初始化
+	* @param  None
+  * @retval None
+  * @note   用于检测串口接收状态
+*/
+static void Health_TIM_Init(void)
+{	
+	NVIC_InitTypeDef NVIC_InitStructure;
+	TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
+
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
+	
+	TIM_DeInit(TIM3);
+	TIM_TimeBaseStructure.TIM_Period = 1000-1; 
+	TIM_TimeBaseStructure.TIM_Prescaler = 7200-1; 
+	TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; 
+	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; 
+	TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
+
+	TIM_ITConfig(TIM3,TIM_IT_Update,ENABLE);
+	TIM_Cmd(TIM3,DISABLE);
+
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+}
+/**
+  * @brief  串口初始化
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+static void Health_USART_Init(void)
+{  
+	NVIC_InitTypeDef NVIC_InitStructure;
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+
+	Health_GPIO_APBxClkCmd(Health_GPIO_CLK, ENABLE);
+	Health_APBxClkCmd(Health_CLK,ENABLE);
+
+ 	USART_DeInit(Healthx); 
+	//USART_TX
+  GPIO_InitStructure.GPIO_Pin = Health_TX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+  GPIO_Init(Health_TX_GPIO_PORT, &GPIO_InitStructure);
+  //USART_RX
+  GPIO_InitStructure.GPIO_Pin = Health_RX_GPIO_PIN;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+  GPIO_Init(Health_RX_GPIO_PORT, &GPIO_InitStructure);
+	
+	USART_InitStructure.USART_BaudRate = Health_BAUDRATE;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;	
+	USART_Init(Healthx, &USART_InitStructure);
+	
+	USART_Cmd(Healthx, ENABLE);
+  USART_ITConfig(Healthx, USART_IT_RXNE, ENABLE);
+
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	NVIC_InitStructure.NVIC_IRQChannel = Health_IRQ;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+	
+	Health_RX_STA=0;
+}
+/**
+  * @brief  健康检测模块初始化
+	* @param  None
+  * @retval None
+  * @note   None
+*/
+static void Health_Init(void)
+{
+	Health_USART_Init();
+	Health_TIM_Init();
+}

module_Template/智能健康检测模块/Health.h

@@ -0,0 +1,27 @@
+#ifndef __HEALTH_AS_H
+#define __HEALTH_AS_H
+
+#include "main.h" 	   
+
+typedef struct {
+	uint8_t head; // 数据头
+	int8_t heartRateWaveform[64]; // 心率波形数据
+	uint8_t heartRate; // 心率
+	uint8_t spo; // 血氧
+	uint8_t bk; // 微循环
+	uint8_t rsv[8]; // 保留数据 rsv[3]收缩压 rsv[4]舒张压
+}HealthDataStruct;
+
+typedef struct {
+	void (* Init)(void);
+	void (* GetHealthData)(HealthDataStruct* HealthData1);
+	void (* Open)(void);
+	void (* Close)(void);
+}HealthClassStruct;
+
+extern HealthClassStruct HealthClass;
+
+void Health_TIM_Init(void);
+void Health_USART_Init(void);
+
+#endif

project_Template/Drive/MultiButton.c

@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2016 Zibin Zheng <znbin@qq.com>
+ * All rights reserved
+ */
+
+#include "MultiButton.h"
+
+#define EVENT_CB(ev)   if(handle->cb[ev])handle->cb[ev]((Button*)handle)
+
+//button handle list head.
+static struct Button* head_handle = NULL;
+
+/**
+  * @brief  Initializes the button struct handle.
+  * @param  handle: the button handle strcut.
+  * @param  pin_level: read the HAL GPIO of the connet button level.
+  * @param  active_level: pressed GPIO level.
+  * @retval None
+  */
+void button_init(struct Button* handle, uint8_t(*pin_level)(), uint8_t active_level)
+{
+	memset(handle, 0, sizeof(struct Button));
+	handle->event = (uint8_t)NONE_PRESS;
+	handle->hal_button_Level = pin_level;
+	handle->button_level = handle->hal_button_Level();
+	handle->active_level = active_level;
+}
+
+/**
+  * @brief  Attach the button event callback function.
+  * @param  handle: the button handle strcut.
+  * @param  event: trigger event type.
+  * @param  cb: callback function.
+  * @retval None
+  */
+void button_attach(struct Button* handle, PressEvent event, BtnCallback cb)
+{
+	handle->cb[event] = cb;
+}
+
+/**
+  * @brief  Inquire the button event happen.
+  * @param  handle: the button handle strcut.
+  * @retval button event.
+  */
+PressEvent get_button_event(struct Button* handle)
+{
+	return (PressEvent)(handle->event);
+}
+
+/**
+  * @brief  Button driver core function, driver state machine.
+  * @param  handle: the button handle strcut.
+  * @retval None
+  */
+void button_handler(struct Button* handle)
+{
+	uint8_t read_gpio_level = handle->hal_button_Level();
+
+	//ticks counter working..
+	if((handle->state) > 0) handle->ticks++;
+
+	/*------------button debounce handle---------------*/
+	if(read_gpio_level != handle->button_level) { //not equal to prev one
+		//continue read 3 times same new level change
+		if(++(handle->debounce_cnt) >= DEBOUNCE_TICKS) {
+			handle->button_level = read_gpio_level;
+			handle->debounce_cnt = 0;
+		}
+	} else { //leved not change ,counter reset.
+		handle->debounce_cnt = 0;
+	}
+
+	/*-----------------State machine-------------------*/
+	switch (handle->state) {
+	case 0:
+		if(handle->button_level == handle->active_level) {	//start press down
+			handle->event = (uint8_t)PRESS_DOWN;
+			EVENT_CB(PRESS_DOWN);
+			handle->ticks = 0;
+			handle->repeat = 1;
+			handle->state = 1;
+		} else {
+			handle->event = (uint8_t)NONE_PRESS;
+		}
+		break;
+
+	case 1:
+		if(handle->button_level != handle->active_level) { //released press up
+			handle->event = (uint8_t)PRESS_UP;
+			EVENT_CB(PRESS_UP);
+			handle->ticks = 0;
+			handle->state = 2;
+
+		} else if(handle->ticks > LONG_TICKS) {
+			handle->event = (uint8_t)LONG_PRESS_START;
+			EVENT_CB(LONG_PRESS_START);
+			handle->state = 5;
+		}
+		break;
+
+	case 2:
+		if(handle->button_level == handle->active_level) { //press down again
+			handle->event = (uint8_t)PRESS_DOWN;
+			EVENT_CB(PRESS_DOWN);
+			handle->repeat++;
+			EVENT_CB(PRESS_REPEAT); // repeat hit
+			handle->ticks = 0;
+			handle->state = 3;
+		} else if(handle->ticks > SHORT_TICKS) { //released timeout
+			if(handle->repeat == 1) {
+				handle->event = (uint8_t)SINGLE_CLICK;
+				EVENT_CB(SINGLE_CLICK);
+			} else if(handle->repeat == 2) {
+				handle->event = (uint8_t)DOUBLE_CLICK;
+				EVENT_CB(DOUBLE_CLICK); // repeat hit
+			}
+			handle->state = 0;
+		}
+		break;
+
+	case 3:
+		if(handle->button_level != handle->active_level) { //released press up
+			handle->event = (uint8_t)PRESS_UP;
+			EVENT_CB(PRESS_UP);
+			if(handle->ticks < SHORT_TICKS) {
+				handle->ticks = 0;
+				handle->state = 2; //repeat press
+			} else {
+				handle->state = 0;
+			}
+		}else if(handle->ticks > SHORT_TICKS){ // long press up
+			handle->state = 0;
+		}
+		break;
+
+	case 5:
+		if(handle->button_level == handle->active_level) {
+			//continue hold trigger
+			handle->event = (uint8_t)LONG_PRESS_HOLD;
+			EVENT_CB(LONG_PRESS_HOLD);
+
+		} else { //releasd
+			handle->event = (uint8_t)PRESS_UP;
+			EVENT_CB(PRESS_UP);
+			handle->state = 0; //reset
+		}
+		break;
+	}
+}
+
+/**
+  * @brief  Start the button work, add the handle into work list.
+  * @param  handle: target handle strcut.
+  * @retval 0: succeed. -1: already exist.
+  */
+int button_start(struct Button* handle)
+{
+	struct Button* target = head_handle;
+	while(target) {
+		if(target == handle) return -1;	//already exist.
+		target = target->next;
+	}
+	handle->next = head_handle;
+	head_handle = handle;
+	return 0;
+}
+
+/**
+  * @brief  Stop the button work, remove the handle off work list.
+  * @param  handle: target handle strcut.
+  * @retval None
+  */
+void button_stop(struct Button* handle)
+{
+	struct Button** curr;
+	for(curr = &head_handle; *curr; ) {
+		struct Button* entry = *curr;
+		if (entry == handle) {
+			*curr = entry->next;
+//			free(entry);
+			return;//glacier add 2021-8-18
+		} else
+			curr = &entry->next;
+	}
+}
+
+/**
+  * @brief  background ticks, timer repeat invoking interval 5ms.
+  * @param  None.
+  * @retval None
+  */
+void button_ticks()
+{
+	struct Button* target;
+	for(target=head_handle; target; target=target->next) {
+		button_handler(target);
+	}
+}
+

project_Template/Drive/MultiButton.h

@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2016 Zibin Zheng <znbin@qq.com>
+ * All rights reserved
+ */
+
+#ifndef _MULTI_BUTTON_H_
+#define _MULTI_BUTTON_H_
+
+#include "stdint.h"
+#include "string.h"
+
+//According to your need to modify the constants.
+#define TICKS_INTERVAL    10	//ms
+#define DEBOUNCE_TICKS    3	//MAX 8
+#define SHORT_TICKS       (300 /TICKS_INTERVAL)
+#define LONG_TICKS        (1000 /TICKS_INTERVAL)
+
+
+typedef void (*BtnCallback)(void*);
+
+typedef enum {
+	PRESS_DOWN = 0,
+	PRESS_UP,
+	PRESS_REPEAT,
+	SINGLE_CLICK,
+	DOUBLE_CLICK,
+	LONG_PRESS_START,
+	LONG_PRESS_HOLD,
+	number_of_event,
+	NONE_PRESS
+}PressEvent;
+
+typedef struct Button {
+	uint16_t ticks;
+	uint8_t  repeat : 4;
+	uint8_t  event : 4;
+	uint8_t  state : 3;
+	uint8_t  debounce_cnt : 3;
+	uint8_t  active_level : 1;
+	uint8_t  button_level : 1;
+	uint8_t  (*hal_button_Level)(void);
+	BtnCallback  cb[number_of_event];
+	struct Button* next;
+}Button;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void button_init(struct Button* handle, uint8_t(*pin_level)(), uint8_t active_level);
+void button_attach(struct Button* handle, PressEvent event, BtnCallback cb);
+PressEvent get_button_event(struct Button* handle);
+int  button_start(struct Button* handle);
+void button_stop(struct Button* handle);
+void button_ticks(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

project_Template/Libraries/CMSIS/core_cm3.c

@@ -0,0 +1,784 @@
+/**************************************************************************//**
+ * @file     core_cm3.c
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Source File
+ * @version  V1.30
+ * @date     30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M 
+ * processor based microcontrollers.  This file can be freely distributed 
+ * within development tools that are supporting such ARM based processors. 
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#include <stdint.h>
+
+/* define compiler specific symbols */
+#if defined ( __CC_ARM   )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+
+#elif defined ( __ICCARM__ )
+  #define __ASM           __asm                                       /*!< asm keyword for IAR Compiler          */
+  #define __INLINE        inline                                      /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined   (  __GNUC__  )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+
+#elif defined   (  __TASKING__  )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+
+#endif
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+
+#if defined ( __CC_ARM   ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+__ASM uint32_t __get_PSP(void)
+{
+  mrs r0, psp
+  bx lr
+}
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+__ASM void __set_PSP(uint32_t topOfProcStack)
+{
+  msr psp, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+__ASM uint32_t __get_MSP(void)
+{
+  mrs r0, msp
+  bx lr
+}
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+__ASM void __set_MSP(uint32_t mainStackPointer)
+{
+  msr msp, r0
+  bx lr
+}
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param   value  value to reverse
+ * @return         reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+__ASM uint32_t __REV16(uint16_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+
+/**
+ * @brief  Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param   value  value to reverse
+ * @return         reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+__ASM int32_t __REVSH(int16_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief  Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+__ASM void __CLREX(void)
+{
+  clrex
+}
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+__ASM uint32_t  __get_BASEPRI(void)
+{
+  mrs r0, basepri
+  bx lr
+}
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+__ASM void __set_BASEPRI(uint32_t basePri)
+{
+  msr basepri, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+__ASM uint32_t __get_PRIMASK(void)
+{
+  mrs r0, primask
+  bx lr
+}
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param  priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+__ASM void __set_PRIMASK(uint32_t priMask)
+{
+  msr primask, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+__ASM uint32_t  __get_FAULTMASK(void)
+{
+  mrs r0, faultmask
+  bx lr
+}
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask  faultMask value
+ *
+ * Set the fault mask register
+ */
+__ASM void __set_FAULTMASK(uint32_t faultMask)
+{
+  msr faultmask, r0
+  bx lr
+}
+
+/**
+ * @brief  Return the Control Register value
+ * 
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+__ASM uint32_t __get_CONTROL(void)
+{
+  mrs r0, control
+  bx lr
+}
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+__ASM void __set_CONTROL(uint32_t control)
+{
+  msr control, r0
+  bx lr
+}
+
+#endif /* __ARMCC_VERSION  */ 
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#pragma diag_suppress=Pe940
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void)
+{
+  __ASM("mrs r0, psp");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM("msr psp, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void)
+{
+  __ASM("mrs r0, msp");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM("msr msp, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+  __ASM("rev16 r0, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  Reverse bit order of value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+  __ASM("rbit r0, r0");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  LDR Exclusive (8 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+  __ASM("ldrexb r0, [r0]");
+  __ASM("bx lr"); 
+}
+
+/**
+ * @brief  LDR Exclusive (16 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+  __ASM("ldrexh r0, [r0]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  LDR Exclusive (32 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+  __ASM("ldrex r0, [r0]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  STR Exclusive (8 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+  __ASM("strexb r0, r0, [r1]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  STR Exclusive (16 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+  __ASM("strexh r0, r0, [r1]");
+  __ASM("bx lr");
+}
+
+/**
+ * @brief  STR Exclusive (32 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+  __ASM("strex r0, r0, [r1]");
+  __ASM("bx lr");
+}
+
+#pragma diag_default=Pe940
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void) __attribute__( ( naked ) );
+uint32_t __get_PSP(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, psp\n\t" 
+                  "MOV r0, %0 \n\t"
+                  "BX  lr     \n\t"  : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
+void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0\n\t"
+                  "BX  lr     \n\t" : : "r" (topOfProcStack) );
+}
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void) __attribute__( ( naked ) );
+uint32_t __get_MSP(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, msp\n\t" 
+                  "MOV r0, %0 \n\t"
+                  "BX  lr     \n\t"  : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
+void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0\n\t"
+                  "BX  lr     \n\t" : : "r" (topOfMainStack) );
+}
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+uint32_t __get_BASEPRI(void)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+void __set_BASEPRI(uint32_t value)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (value) );
+}
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+uint32_t __get_PRIMASK(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param  priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
+}
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask  faultMask value
+ *
+ * Set the fault mask register
+ */
+void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
+}
+
+/**
+ * @brief  Return the Control Register value
+* 
+*  @return Control value
+ *
+ * Return the content of the control register
+ */
+uint32_t __get_CONTROL(void)
+{
+  uint32_t result=0;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) );
+}
+
+
+/**
+ * @brief  Reverse byte order in integer value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in integer value
+ */
+uint32_t __REV(uint32_t value)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+/**
+ * @brief  Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+int32_t __REVSH(int16_t value)
+{
+  uint32_t result=0;
+  
+  __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+/**
+ * @brief  Reverse bit order of value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result=0;
+  
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+   return(result);
+}
+
+/**
+ * @brief  LDR Exclusive (8 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+    uint8_t result=0;
+  
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
+   return(result);
+}
+
+/**
+ * @brief  LDR Exclusive (16 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+    uint16_t result=0;
+  
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
+   return(result);
+}
+
+/**
+ * @brief  LDR Exclusive (32 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+    uint32_t result=0;
+  
+   __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
+   return(result);
+}
+
+/**
+ * @brief  STR Exclusive (8 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+   uint32_t result=0;
+  
+   __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+   return(result);
+}
+
+/**
+ * @brief  STR Exclusive (16 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+   uint32_t result=0;
+  
+   __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+   return(result);
+}
+
+/**
+ * @brief  STR Exclusive (32 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+   uint32_t result=0;
+  
+   __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+   return(result);
+}
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif

project_Template/Libraries/CMSIS/core_cm3.h

@@ -0,0 +1,1818 @@
+/**************************************************************************//**
+ * @file     core_cm3.h
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version  V1.30
+ * @date     30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M 
+ * processor based microcontrollers.  This file can be freely distributed 
+ * within development tools that are supporting such ARM based processors. 
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __CM3_CORE_H__
+#define __CM3_CORE_H__
+
+/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
+ *
+ * List of Lint messages which will be suppressed and not shown:
+ *   - Error 10: \n
+ *     register uint32_t __regBasePri         __asm("basepri"); \n
+ *     Error 10: Expecting ';'
+ * .
+ *   - Error 530: \n
+ *     return(__regBasePri); \n
+ *     Warning 530: Symbol '__regBasePri' (line 264) not initialized
+ * . 
+ *   - Error 550: \n
+ *     __regBasePri = (basePri & 0x1ff); \n
+ *     Warning 550: Symbol '__regBasePri' (line 271) not accessed
+ * .
+ *   - Error 754: \n
+ *     uint32_t RESERVED0[24]; \n
+ *     Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced
+ * .
+ *   - Error 750: \n
+ *     #define __CM3_CORE_H__ \n
+ *     Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced
+ * .
+ *   - Error 528: \n
+ *     static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
+ *     Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced
+ * .
+ *   - Error 751: \n
+ *     } InterruptType_Type; \n
+ *     Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced
+ * .
+ * Note:  To re-enable a Message, insert a space before 'lint' *
+ *
+ */
+
+/*lint -save */
+/*lint -e10  */
+/*lint -e530 */
+/*lint -e550 */
+/*lint -e754 */
+/*lint -e750 */
+/*lint -e528 */
+/*lint -e751 */
+
+
+/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
+  This file defines all structures and symbols for CMSIS core:
+    - CMSIS version number
+    - Cortex-M core registers and bitfields
+    - Cortex-M core peripheral base address
+  @{
+ */
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+#define __CM3_CMSIS_VERSION_MAIN  (0x01)                                                       /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB   (0x30)                                                       /*!< [15:0]  CMSIS HAL sub version  */
+#define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number       */
+
+#define __CORTEX_M                (0x03)                                                       /*!< Cortex core                    */
+
+#include <stdint.h>                           /* Include standard types */
+
+#if defined (__ICCARM__)
+  #include <intrinsics.h>                     /* IAR Intrinsics   */
+#endif
+
+
+#ifndef __NVIC_PRIO_BITS
+  #define __NVIC_PRIO_BITS    4               /*!< standard definition for NVIC Priority Bits */
+#endif
+
+
+
+
+/**
+ * IO definitions
+ *
+ * define access restrictions to peripheral registers
+ */
+
+#ifdef __cplusplus
+  #define     __I     volatile                /*!< defines 'read only' permissions      */
+#else
+  #define     __I     volatile const          /*!< defines 'read only' permissions      */
+#endif
+#define     __O     volatile                  /*!< defines 'write only' permissions     */
+#define     __IO    volatile                  /*!< defines 'read / write' permissions   */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+ ******************************************************************************/
+/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
+ @{
+*/
+
+
+/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
+  memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
+  @{
+ */
+typedef struct
+{
+  __IO uint32_t ISER[8];                      /*!< Offset: 0x000  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[24];                                   
+  __IO uint32_t ICER[8];                      /*!< Offset: 0x080  Interrupt Clear Enable Register         */
+       uint32_t RSERVED1[24];                                    
+  __IO uint32_t ISPR[8];                      /*!< Offset: 0x100  Interrupt Set Pending Register          */
+       uint32_t RESERVED2[24];                                   
+  __IO uint32_t ICPR[8];                      /*!< Offset: 0x180  Interrupt Clear Pending Register        */
+       uint32_t RESERVED3[24];                                   
+  __IO uint32_t IABR[8];                      /*!< Offset: 0x200  Interrupt Active bit Register           */
+       uint32_t RESERVED4[56];                                   
+  __IO uint8_t  IP[240];                      /*!< Offset: 0x300  Interrupt Priority Register (8Bit wide) */
+       uint32_t RESERVED5[644];                                  
+  __O  uint32_t STIR;                         /*!< Offset: 0xE00  Software Trigger Interrupt Register     */
+}  NVIC_Type;                                               
+/*@}*/ /* end of group CMSIS_CM3_NVIC */
+
+
+/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
+  memory mapped structure for System Control Block (SCB)
+  @{
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                        /*!< Offset: 0x00  CPU ID Base Register                                  */
+  __IO uint32_t ICSR;                         /*!< Offset: 0x04  Interrupt Control State Register                      */
+  __IO uint32_t VTOR;                         /*!< Offset: 0x08  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                        /*!< Offset: 0x0C  Application Interrupt / Reset Control Register        */
+  __IO uint32_t SCR;                          /*!< Offset: 0x10  System Control Register                               */
+  __IO uint32_t CCR;                          /*!< Offset: 0x14  Configuration Control Register                        */
+  __IO uint8_t  SHP[12];                      /*!< Offset: 0x18  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IO uint32_t SHCSR;                        /*!< Offset: 0x24  System Handler Control and State Register             */
+  __IO uint32_t CFSR;                         /*!< Offset: 0x28  Configurable Fault Status Register                    */
+  __IO uint32_t HFSR;                         /*!< Offset: 0x2C  Hard Fault Status Register                            */
+  __IO uint32_t DFSR;                         /*!< Offset: 0x30  Debug Fault Status Register                           */
+  __IO uint32_t MMFAR;                        /*!< Offset: 0x34  Mem Manage Address Register                           */
+  __IO uint32_t BFAR;                         /*!< Offset: 0x38  Bus Fault Address Register                            */
+  __IO uint32_t AFSR;                         /*!< Offset: 0x3C  Auxiliary Fault Status Register                       */
+  __I  uint32_t PFR[2];                       /*!< Offset: 0x40  Processor Feature Register                            */
+  __I  uint32_t DFR;                          /*!< Offset: 0x48  Debug Feature Register                                */
+  __I  uint32_t ADR;                          /*!< Offset: 0x4C  Auxiliary Feature Register                            */
+  __I  uint32_t MMFR[4];                      /*!< Offset: 0x50  Memory Model Feature Register                         */
+  __I  uint32_t ISAR[5];                      /*!< Offset: 0x60  ISA Feature Register                                  */
+} SCB_Type;                                                
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFul << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFul << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFul << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFul << SCB_CPUID_REVISION_Pos)              /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1ul << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1ul << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1ul << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1ul << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1ul << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1ul << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1ul << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFul << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11                                             /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1ul << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFul << SCB_ICSR_VECTACTIVE_Pos)           /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos               29                                             /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk               (0x1FFul << SCB_VTOR_TBLBASE_Pos)              /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFul << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1ul << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8                                             /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7ul << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1ul << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0                                             /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1ul << SCB_AIRCR_VECTRESET_Pos)               /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1ul << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1ul << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1ul << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1ul << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8                                             /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1ul << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4                                             /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1ul << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1ul << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1                                             /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1ul << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0                                             /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1ul << SCB_CCR_NONBASETHRDENA_Pos)            /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18                                             /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1ul << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17                                             /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1ul << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16                                             /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1ul << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1ul << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14                                             /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13                                             /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12                                             /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1ul << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11                                             /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1ul << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10                                             /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1ul << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8                                             /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1ul << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7                                             /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1ul << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+                                     
+#define SCB_SHCSR_USGFAULTACT_Pos           3                                             /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1ul << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1                                             /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1ul << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0                                             /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1ul << SCB_SHCSR_MEMFAULTACT_Pos)             /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16                                             /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8                                             /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFul << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0                                             /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFul << SCB_CFSR_MEMFAULTSR_Pos)            /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31                                             /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1ul << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30                                             /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1ul << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1                                             /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1ul << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4                                             /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1ul << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3                                             /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1ul << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2                                             /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1ul << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1                                             /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1ul << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0                                             /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1ul << SCB_DFSR_HALTED_Pos)                   /*!< SCB DFSR: HALTED Mask */
+/*@}*/ /* end of group CMSIS_CM3_SCB */
+
+
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+  memory mapped structure for SysTick
+  @{
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                         /*!< Offset: 0x00  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                         /*!< Offset: 0x04  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                          /*!< Offset: 0x08  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                        /*!< Offset: 0x0C  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1ul << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1ul << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1ul << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1ul << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1ul << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1ul << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */
+
+
+/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
+  memory mapped structure for Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+typedef struct
+{
+  __O  union  
+  {
+    __O  uint8_t    u8;                       /*!< Offset:       ITM Stimulus Port 8-bit                   */
+    __O  uint16_t   u16;                      /*!< Offset:       ITM Stimulus Port 16-bit                  */
+    __O  uint32_t   u32;                      /*!< Offset:       ITM Stimulus Port 32-bit                  */
+  }  PORT [32];                               /*!< Offset: 0x00  ITM Stimulus Port Registers               */
+       uint32_t RESERVED0[864];                                 
+  __IO uint32_t TER;                          /*!< Offset:       ITM Trace Enable Register                 */
+       uint32_t RESERVED1[15];                                  
+  __IO uint32_t TPR;                          /*!< Offset:       ITM Trace Privilege Register              */
+       uint32_t RESERVED2[15];                                  
+  __IO uint32_t TCR;                          /*!< Offset:       ITM Trace Control Register                */
+       uint32_t RESERVED3[29];                                  
+  __IO uint32_t IWR;                          /*!< Offset:       ITM Integration Write Register            */
+  __IO uint32_t IRR;                          /*!< Offset:       ITM Integration Read Register             */
+  __IO uint32_t IMCR;                         /*!< Offset:       ITM Integration Mode Control Register     */
+       uint32_t RESERVED4[43];                                  
+  __IO uint32_t LAR;                          /*!< Offset:       ITM Lock Access Register                  */
+  __IO uint32_t LSR;                          /*!< Offset:       ITM Lock Status Register                  */
+       uint32_t RESERVED5[6];                                   
+  __I  uint32_t PID4;                         /*!< Offset:       ITM Peripheral Identification Register #4 */
+  __I  uint32_t PID5;                         /*!< Offset:       ITM Peripheral Identification Register #5 */
+  __I  uint32_t PID6;                         /*!< Offset:       ITM Peripheral Identification Register #6 */
+  __I  uint32_t PID7;                         /*!< Offset:       ITM Peripheral Identification Register #7 */
+  __I  uint32_t PID0;                         /*!< Offset:       ITM Peripheral Identification Register #0 */
+  __I  uint32_t PID1;                         /*!< Offset:       ITM Peripheral Identification Register #1 */
+  __I  uint32_t PID2;                         /*!< Offset:       ITM Peripheral Identification Register #2 */
+  __I  uint32_t PID3;                         /*!< Offset:       ITM Peripheral Identification Register #3 */
+  __I  uint32_t CID0;                         /*!< Offset:       ITM Component  Identification Register #0 */
+  __I  uint32_t CID1;                         /*!< Offset:       ITM Component  Identification Register #1 */
+  __I  uint32_t CID2;                         /*!< Offset:       ITM Component  Identification Register #2 */
+  __I  uint32_t CID3;                         /*!< Offset:       ITM Component  Identification Register #3 */
+} ITM_Type;                                                
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0                                             /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFul << ITM_TPR_PRIVMASK_Pos)                /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23                                             /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1ul << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_ATBID_Pos                  16                                             /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_ATBID_Msk                  (0x7Ful << ITM_TCR_ATBID_Pos)                  /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8                                             /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3ul << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4                                             /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1ul << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3                                             /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1ul << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2                                             /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1ul << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1                                             /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1ul << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0                                             /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1ul << ITM_TCR_ITMENA_Pos)                    /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0                                             /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1ul << ITM_IWR_ATVALIDM_Pos)                  /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0                                             /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1ul << ITM_IRR_ATREADYM_Pos)                  /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0                                             /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1ul << ITM_IMCR_INTEGRATION_Pos)              /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2                                             /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1ul << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1                                             /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1ul << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0                                             /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1ul << ITM_LSR_Present_Pos)                   /*!< ITM LSR: Present Mask */
+/*@}*/ /* end of group CMSIS_CM3_ITM */
+
+
+/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
+  memory mapped structure for Interrupt Type
+  @{
+ */
+typedef struct
+{
+       uint32_t RESERVED0;
+  __I  uint32_t ICTR;                         /*!< Offset: 0x04  Interrupt Control Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+  __IO uint32_t ACTLR;                        /*!< Offset: 0x08  Auxiliary Control Register      */
+#else
+       uint32_t RESERVED1;
+#endif
+} InterruptType_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define InterruptType_ICTR_INTLINESNUM_Pos  0                                             /*!< InterruptType ICTR: INTLINESNUM Position */
+#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define InterruptType_ACTLR_DISFOLD_Pos     2                                             /*!< InterruptType ACTLR: DISFOLD Position */
+#define InterruptType_ACTLR_DISFOLD_Msk    (1ul << InterruptType_ACTLR_DISFOLD_Pos)       /*!< InterruptType ACTLR: DISFOLD Mask */
+
+#define InterruptType_ACTLR_DISDEFWBUF_Pos  1                                             /*!< InterruptType ACTLR: DISDEFWBUF Position */
+#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos)    /*!< InterruptType ACTLR: DISDEFWBUF Mask */
+
+#define InterruptType_ACTLR_DISMCYCINT_Pos  0                                             /*!< InterruptType ACTLR: DISMCYCINT Position */
+#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos)    /*!< InterruptType ACTLR: DISMCYCINT Mask */
+/*@}*/ /* end of group CMSIS_CM3_InterruptType */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
+  memory mapped structure for Memory Protection Unit (MPU)
+  @{
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                         /*!< Offset: 0x00  MPU Type Register                              */
+  __IO uint32_t CTRL;                         /*!< Offset: 0x04  MPU Control Register                           */
+  __IO uint32_t RNR;                          /*!< Offset: 0x08  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                         /*!< Offset: 0x0C  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                         /*!< Offset: 0x10  MPU Region Attribute and Size Register         */
+  __IO uint32_t RBAR_A1;                      /*!< Offset: 0x14  MPU Alias 1 Region Base Address Register       */
+  __IO uint32_t RASR_A1;                      /*!< Offset: 0x18  MPU Alias 1 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A2;                      /*!< Offset: 0x1C  MPU Alias 2 Region Base Address Register       */
+  __IO uint32_t RASR_A2;                      /*!< Offset: 0x20  MPU Alias 2 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A3;                      /*!< Offset: 0x24  MPU Alias 3 Region Base Address Register       */
+  __IO uint32_t RASR_A3;                      /*!< Offset: 0x28  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;                                                
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFul << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFul << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1ul << MPU_TYPE_SEPARATE_Pos)                 /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1ul << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1ul << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1ul << MPU_CTRL_ENABLE_Pos)                   /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFul << MPU_RNR_REGION_Pos)                 /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   5                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFul << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1ul << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFul << MPU_RBAR_REGION_Pos)                 /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: XN Position */
+#define MPU_RASR_XN_Msk                    (1ul << MPU_RASR_XN_Pos)                       /*!< MPU RASR: XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: AP Position */
+#define MPU_RASR_AP_Msk                    (7ul << MPU_RASR_AP_Pos)                       /*!< MPU RASR: AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: TEX Position */
+#define MPU_RASR_TEX_Msk                   (7ul << MPU_RASR_TEX_Pos)                      /*!< MPU RASR: TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: Shareable bit Position */
+#define MPU_RASR_S_Msk                     (1ul << MPU_RASR_S_Pos)                        /*!< MPU RASR: Shareable bit Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: Cacheable bit Position */
+#define MPU_RASR_C_Msk                     (1ul << MPU_RASR_C_Pos)                        /*!< MPU RASR: Cacheable bit Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: Bufferable bit Position */
+#define MPU_RASR_B_Msk                     (1ul << MPU_RASR_B_Pos)                        /*!< MPU RASR: Bufferable bit Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFul << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1Ful << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENA_Pos                     0                                            /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENA_Msk                    (0x1Ful << MPU_RASR_ENA_Pos)                  /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@}*/ /* end of group CMSIS_CM3_MPU */
+#endif
+
+
+/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
+  memory mapped structure for Core Debug Register
+  @{
+ */
+typedef struct
+{
+  __IO uint32_t DHCSR;                        /*!< Offset: 0x00  Debug Halting Control and Status Register    */
+  __O  uint32_t DCRSR;                        /*!< Offset: 0x04  Debug Core Register Selector Register        */
+  __IO uint32_t DCRDR;                        /*!< Offset: 0x08  Debug Core Register Data Register            */
+  __IO uint32_t DEMCR;                        /*!< Offset: 0x0C  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16                                             /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25                                             /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24                                             /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19                                             /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18                                             /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1ul << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17                                             /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1ul << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16                                             /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1ul << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5                                             /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3                                             /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2                                             /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1ul << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1                                             /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1ul << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0                                             /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos)         /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos         16                                             /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1ul << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0                                             /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos)         /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos         24                                             /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1ul << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19                                             /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1ul << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18                                             /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1ul << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17                                             /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1ul << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16                                             /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1ul << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10                                             /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9                                             /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1ul << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8                                             /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7                                             /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1ul << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6                                             /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5                                             /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4                                             /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1ul << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0                                             /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos)      /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
+
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE            (0xE000E000)                              /*!< System Control Space Base Address */
+#define ITM_BASE            (0xE0000000)                              /*!< ITM Base Address                  */
+#define CoreDebug_BASE      (0xE000EDF0)                              /*!< Core Debug Base Address           */
+#define SysTick_BASE        (SCS_BASE +  0x0010)                      /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100)                      /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00)                      /*!< System Control Block Base Address */
+
+#define InterruptType       ((InterruptType_Type *) SCS_BASE)         /*!< Interrupt Type Register           */
+#define SCB                 ((SCB_Type *)           SCB_BASE)         /*!< SCB configuration struct          */
+#define SysTick             ((SysTick_Type *)       SysTick_BASE)     /*!< SysTick configuration struct      */
+#define NVIC                ((NVIC_Type *)          NVIC_BASE)        /*!< NVIC configuration struct         */
+#define ITM                 ((ITM_Type *)           ITM_BASE)         /*!< ITM configuration struct          */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct   */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90)                      /*!< Memory Protection Unit            */
+  #define MPU               ((MPU_Type*)            MPU_BASE)         /*!< Memory Protection Unit            */
+#endif
+
+/*@}*/ /* end of group CMSIS_CM3_core_register */
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+ ******************************************************************************/
+
+#if defined ( __CC_ARM   )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+
+#elif defined ( __ICCARM__ )
+  #define __ASM           __asm                                       /*!< asm keyword for IAR Compiler          */
+  #define __INLINE        inline                                      /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined   (  __GNUC__  )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+
+#elif defined   (  __TASKING__  )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+
+#endif
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+
+#if defined ( __CC_ARM   ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#define __enable_fault_irq                __enable_fiq
+#define __disable_fault_irq               __disable_fiq
+
+#define __NOP                             __nop
+#define __WFI                             __wfi
+#define __WFE                             __wfe
+#define __SEV                             __sev
+#define __ISB()                           __isb(0)
+#define __DSB()                           __dsb(0)
+#define __DMB()                           __dmb(0)
+#define __REV                             __rev
+#define __RBIT                            __rbit
+#define __LDREXB(ptr)                     ((unsigned char ) __ldrex(ptr))
+#define __LDREXH(ptr)                     ((unsigned short) __ldrex(ptr))
+#define __LDREXW(ptr)                     ((unsigned int  ) __ldrex(ptr))
+#define __STREXB(value, ptr)              __strex(value, ptr)
+#define __STREXH(value, ptr)              __strex(value, ptr)
+#define __STREXW(value, ptr)              __strex(value, ptr)
+
+
+/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
+/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
+/* intrinsic void __enable_irq();     */
+/* intrinsic void __disable_irq();    */
+
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param   value  value to reverse
+ * @return         reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief  Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param   value  value to reverse
+ * @return         reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief  Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+extern void __CLREX(void);
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param   priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief  Return the Control Register value
+ * 
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+#else  /* (__ARMCC_VERSION >= 400000)  */
+
+/**
+ * @brief  Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+#define __CLREX                           __clrex
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+static __INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+static __INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xff);
+}
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+static __INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param  priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+static __INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+static __INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask  faultMask value
+ *
+ * Set the fault mask register
+ */
+static __INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & 1);
+}
+
+/**
+ * @brief  Return the Control Register value
+ * 
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+static __INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+static __INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+#endif /* __ARMCC_VERSION  */ 
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#define __enable_irq                              __enable_interrupt        /*!< global Interrupt enable */
+#define __disable_irq                             __disable_interrupt       /*!< global Interrupt disable */
+
+static __INLINE void __enable_fault_irq()         { __ASM ("cpsie f"); }
+static __INLINE void __disable_fault_irq()        { __ASM ("cpsid f"); }
+
+#define __NOP                                     __no_operation            /*!< no operation intrinsic in IAR Compiler */ 
+static __INLINE  void __WFI()                     { __ASM ("wfi"); }
+static __INLINE  void __WFE()                     { __ASM ("wfe"); }
+static __INLINE  void __SEV()                     { __ASM ("sev"); }
+static __INLINE  void __CLREX()                   { __ASM ("clrex"); }
+
+/* intrinsic void __ISB(void)                                     */
+/* intrinsic void __DSB(void)                                     */
+/* intrinsic void __DMB(void)                                     */
+/* intrinsic void __set_PRIMASK();                                */
+/* intrinsic void __get_PRIMASK();                                */
+/* intrinsic void __set_FAULTMASK();                              */
+/* intrinsic void __get_FAULTMASK();                              */
+/* intrinsic uint32_t __REV(uint32_t value);                      */
+/* intrinsic uint32_t __REVSH(uint32_t value);                    */
+/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
+/* intrinsic unsigned long __LDREX(unsigned long *);              */
+
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief  Reverse bit order of value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief  LDR Exclusive (8 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief  LDR Exclusive (16 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief  LDR Exclusive (32 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief  STR Exclusive (8 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief  STR Exclusive (16 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief  STR Exclusive (32 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+static __INLINE void __enable_irq()               { __ASM volatile ("cpsie i"); }
+static __INLINE void __disable_irq()              { __ASM volatile ("cpsid i"); }
+
+static __INLINE void __enable_fault_irq()         { __ASM volatile ("cpsie f"); }
+static __INLINE void __disable_fault_irq()        { __ASM volatile ("cpsid f"); }
+
+static __INLINE void __NOP()                      { __ASM volatile ("nop"); }
+static __INLINE void __WFI()                      { __ASM volatile ("wfi"); }
+static __INLINE void __WFE()                      { __ASM volatile ("wfe"); }
+static __INLINE void __SEV()                      { __ASM volatile ("sev"); }
+static __INLINE void __ISB()                      { __ASM volatile ("isb"); }
+static __INLINE void __DSB()                      { __ASM volatile ("dsb"); }
+static __INLINE void __DMB()                      { __ASM volatile ("dmb"); }
+static __INLINE void __CLREX()                    { __ASM volatile ("clrex"); }
+
+
+/**
+ * @brief  Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief  Set the Process Stack Pointer
+ *
+ * @param  topOfProcStack  Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP 
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief  Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief  Set the Main Stack Pointer
+ *
+ * @param  topOfMainStack  Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP 
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief  Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief  Set the Base Priority value
+ *
+ * @param  basePri  BasePriority
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief  Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+extern uint32_t  __get_PRIMASK(void);
+
+/**
+ * @brief  Set the Priority Mask value
+ *
+ * @param  priMask  PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief  Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief  Set the Fault Mask value
+ *
+ * @param  faultMask  faultMask value
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief  Return the Control Register value
+* 
+*  @return Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief  Set the Control Register value
+ *
+ * @param  control  Control value
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+/**
+ * @brief  Reverse byte order in integer value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in integer value
+ */
+extern uint32_t __REV(uint32_t value);
+
+/**
+ * @brief  Reverse byte order in unsigned short value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief  Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+/**
+ * @brief  Reverse bit order of value
+ *
+ * @param  value  value to reverse
+ * @return        reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief  LDR Exclusive (8 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief  LDR Exclusive (16 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief  LDR Exclusive (32 bit)
+ *
+ * @param  *addr  address pointer
+ * @return        value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief  STR Exclusive (8 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief  STR Exclusive (16 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief  STR Exclusive (32 bit)
+ *
+ * @param  value  value to store
+ * @param  *addr  address pointer
+ * @return        successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+
+/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
+  Core  Function Interface containing:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Reset Functions
+*/
+/*@{*/
+
+/* ##########################   NVIC functions  #################################### */
+
+/**
+ * @brief  Set the Priority Grouping in NVIC Interrupt Controller
+ *
+ * @param  PriorityGroup is priority grouping field
+ *
+ * Set the priority grouping field using the required unlock sequence.
+ * The parameter priority_grouping is assigned to the field 
+ * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ */
+static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & 0x07);                         /* only values 0..7 are used          */
+  
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk);             /* clear bits to change               */
+  reg_value  =  (reg_value                       |
+                (0x5FA << SCB_AIRCR_VECTKEY_Pos) | 
+                (PriorityGroupTmp << 8));                                     /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+/**
+ * @brief  Get the Priority Grouping from NVIC Interrupt Controller
+ *
+ * @return priority grouping field 
+ *
+ * Get the priority grouping from NVIC Interrupt Controller.
+ * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
+ */
+static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+  return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos);   /* read priority grouping field */
+}
+
+/**
+ * @brief  Enable Interrupt in NVIC Interrupt Controller
+ *
+ * @param  IRQn   The positive number of the external interrupt to enable
+ *
+ * Enable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+/**
+ * @brief  Disable the interrupt line for external interrupt specified
+ * 
+ * @param  IRQn   The positive number of the external interrupt to disable
+ * 
+ * Disable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+/**
+ * @brief  Read the interrupt pending bit for a device specific interrupt source
+ * 
+ * @param  IRQn    The number of the device specifc interrupt
+ * @return         1 = interrupt pending, 0 = interrupt not pending
+ *
+ * Read the pending register in NVIC and return 1 if its status is pending, 
+ * otherwise it returns 0
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+/**
+ * @brief  Set the pending bit for an external interrupt
+ * 
+ * @param  IRQn    The number of the interrupt for set pending
+ *
+ * Set the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+/**
+ * @brief  Clear the pending bit for an external interrupt
+ *
+ * @param  IRQn    The number of the interrupt for clear pending
+ *
+ * Clear the pending bit for the specified interrupt. 
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+/**
+ * @brief  Read the active bit for an external interrupt
+ *
+ * @param  IRQn    The number of the interrupt for read active bit
+ * @return         1 = interrupt active, 0 = interrupt not active
+ *
+ * Read the active register in NVIC and returns 1 if its status is active, 
+ * otherwise it returns 0.
+ */
+static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+  return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+/**
+ * @brief  Set the priority for an interrupt
+ *
+ * @param  IRQn      The number of the interrupt for set priority
+ * @param  priority  The priority to set
+ *
+ * Set the priority for the specified interrupt. The interrupt 
+ * number can be positive to specify an external (device specific) 
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if(IRQn < 0) {
+    SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
+  else {
+    NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff);    }        /* set Priority for device specific Interrupts  */
+}
+
+/**
+ * @brief  Read the priority for an interrupt
+ *
+ * @param  IRQn      The number of the interrupt for get priority
+ * @return           The priority for the interrupt
+ *
+ * Read the priority for the specified interrupt. The interrupt 
+ * number can be positive to specify an external (device specific) 
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * The returned priority value is automatically aligned to the implemented
+ * priority bits of the microcontroller.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if(IRQn < 0) {
+    return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for Cortex-M3 system interrupts */
+  else {
+    return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)]           >> (8 - __NVIC_PRIO_BITS)));  } /* get priority for device specific interrupts  */
+}
+
+
+/**
+ * @brief  Encode the priority for an interrupt
+ *
+ * @param  PriorityGroup    The used priority group
+ * @param  PreemptPriority  The preemptive priority value (starting from 0)
+ * @param  SubPriority      The sub priority value (starting from 0)
+ * @return                  The encoded priority for the interrupt
+ *
+ * Encode the priority for an interrupt with the given priority group,
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The returned priority value can be used for NVIC_SetPriority(...) function
+ */
+static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & 0x07);          /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+  SubPriorityBits     = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+ 
+  return (
+           ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+           ((SubPriority     & ((1 << (SubPriorityBits    )) - 1)))
+         );
+}
+
+
+/**
+ * @brief  Decode the priority of an interrupt
+ *
+ * @param  Priority           The priority for the interrupt
+ * @param  PriorityGroup      The used priority group
+ * @param  pPreemptPriority   The preemptive priority value (starting from 0)
+ * @param  pSubPriority       The sub priority value (starting from 0)
+ *
+ * Decode an interrupt priority value with the given priority group to 
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The priority value can be retrieved with NVIC_GetPriority(...) function
+ */
+static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & 0x07);          /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+  SubPriorityBits     = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+  
+  *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+  *pSubPriority     = (Priority                   ) & ((1 << (SubPriorityBits    )) - 1);
+}
+
+
+
+/* ##################################    SysTick function  ############################################ */
+
+#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
+
+/**
+ * @brief  Initialize and start the SysTick counter and its interrupt.
+ *
+ * @param   ticks   number of ticks between two interrupts
+ * @return  1 = failed, 0 = successful
+ *
+ * Initialise the system tick timer and its interrupt and start the
+ * system tick timer / counter in free running mode to generate 
+ * periodical interrupts.
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{ 
+  if (ticks > SysTick_LOAD_RELOAD_Msk)  return (1);            /* Reload value impossible */
+                                                               
+  SysTick->LOAD  = (ticks & SysTick_LOAD_RELOAD_Msk) - 1;      /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1);  /* set Priority for Cortex-M0 System Interrupts */
+  SysTick->VAL   = 0;                                          /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk | 
+                   SysTick_CTRL_TICKINT_Msk   | 
+                   SysTick_CTRL_ENABLE_Msk;                    /* Enable SysTick IRQ and SysTick Timer */
+  return (0);                                                  /* Function successful */
+}
+
+#endif
+
+
+
+
+/* ##################################    Reset function  ############################################ */
+
+/**
+ * @brief  Initiate a system reset request.
+ *
+ * Initiate a system reset request to reset the MCU
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+  SCB->AIRCR  = ((0x5FA << SCB_AIRCR_VECTKEY_Pos)      | 
+                 (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | 
+                 SCB_AIRCR_SYSRESETREQ_Msk);                   /* Keep priority group unchanged */
+  __DSB();                                                     /* Ensure completion of memory access */              
+  while(1);                                                    /* wait until reset */
+}
+
+/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+
+/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
+  Core Debug Interface containing:
+  - Core Debug Receive / Transmit Functions
+  - Core Debug Defines
+  - Core Debug Variables
+*/
+/*@{*/
+
+extern volatile int ITM_RxBuffer;                    /*!< variable to receive characters                             */
+#define             ITM_RXBUFFER_EMPTY    0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
+
+
+/**
+ * @brief  Outputs a character via the ITM channel 0
+ *
+ * @param  ch   character to output
+ * @return      character to output
+ *
+ * The function outputs a character via the ITM channel 0. 
+ * The function returns when no debugger is connected that has booked the output.  
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted. 
+ */
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk)  &&      /* Trace enabled */
+      (ITM->TCR & ITM_TCR_ITMENA_Msk)                  &&      /* ITM enabled */
+      (ITM->TER & (1ul << 0)        )                    )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0].u32 == 0);
+    ITM->PORT[0].u8 = (uint8_t) ch;
+  }  
+  return (ch);
+}
+
+
+/**
+ * @brief  Inputs a character via variable ITM_RxBuffer
+ *
+ * @return      received character, -1 = no character received
+ *
+ * The function inputs a character via variable ITM_RxBuffer. 
+ * The function returns when no debugger is connected that has booked the output.  
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted. 
+ */
+static __INLINE int ITM_ReceiveChar (void) {
+  int ch = -1;                               /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+  
+  return (ch); 
+}
+
+
+/**
+ * @brief  Check if a character via variable ITM_RxBuffer is available
+ *
+ * @return      1 = character available, 0 = no character available
+ *
+ * The function checks  variable ITM_RxBuffer whether a character is available or not. 
+ * The function returns '1' if a character is available and '0' if no character is available. 
+ */
+static __INLINE int ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+
+/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+/*@}*/ /* end of group CMSIS_CM3_core_definitions */
+
+#endif /* __CM3_CORE_H__ */
+
+/*lint -restore */

project_Template/Libraries/CMSIS/startup/startup_stm32f10x_hd.s

@@ -0,0 +1,359 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_hd.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.1
+;* Date               : 08-September-2021
+;* Description        : STM32F10x High Density Devices vector table for MDK-ARM 
+;*                      toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system and also configure the external 
+;*                        SRAM mounted on STM3210E-EVAL board to be used as data 
+;*                        memory (optional, to be enabled by user)
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+;*
+;* Copyright (c) 2011 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+                                                  
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1 & ADC2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+                DCD     TIM8_BRK_IRQHandler        ; TIM8 Break
+                DCD     TIM8_UP_IRQHandler         ; TIM8 Update
+                DCD     TIM8_TRG_COM_IRQHandler    ; TIM8 Trigger and Commutation
+                DCD     TIM8_CC_IRQHandler         ; TIM8 Capture Compare
+                DCD     ADC3_IRQHandler            ; ADC3
+                DCD     FSMC_IRQHandler            ; FSMC
+                DCD     SDIO_IRQHandler            ; SDIO
+                DCD     TIM5_IRQHandler            ; TIM5
+                DCD     SPI3_IRQHandler            ; SPI3
+                DCD     UART4_IRQHandler           ; UART4
+                DCD     UART5_IRQHandler           ; UART5
+                DCD     TIM6_IRQHandler            ; TIM6
+                DCD     TIM7_IRQHandler            ; TIM7
+                DCD     DMA2_Channel1_IRQHandler   ; DMA2 Channel1
+                DCD     DMA2_Channel2_IRQHandler   ; DMA2 Channel2
+                DCD     DMA2_Channel3_IRQHandler   ; DMA2 Channel3
+                DCD     DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+                
+; Reset handler
+Reset_Handler   PROC
+                EXPORT  Reset_Handler             [WEAK]
+                IMPORT  __main
+                IMPORT  SystemInit
+                LDR     R0, =SystemInit
+                BLX     R0               
+                LDR     R0, =__main
+                BX      R0
+                ENDP
+                
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+                EXPORT  TIM8_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM8_UP_IRQHandler         [WEAK]
+                EXPORT  TIM8_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM8_CC_IRQHandler         [WEAK]
+                EXPORT  ADC3_IRQHandler            [WEAK]
+                EXPORT  FSMC_IRQHandler            [WEAK]
+                EXPORT  SDIO_IRQHandler            [WEAK]
+                EXPORT  TIM5_IRQHandler            [WEAK]
+                EXPORT  SPI3_IRQHandler            [WEAK]
+                EXPORT  UART4_IRQHandler           [WEAK]
+                EXPORT  UART5_IRQHandler           [WEAK]
+                EXPORT  TIM6_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler            [WEAK]
+                EXPORT  DMA2_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA2_Channel4_5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_IRQHandler
+TIM8_UP_IRQHandler
+TIM8_TRG_COM_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+

project_Template/Libraries/CMSIS/startup/startup_stm32f10x_ld.s

@@ -0,0 +1,298 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_ld.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.1
+;* Date               : 08-September-2021
+;* Description        : STM32F10x Low Density Devices vector table for MDK-ARM 
+;*                      toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+;*
+;* Copyright (c) 2011 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1_2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     0                          ; Reserved
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     0                          ; Reserved
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     0                          ; Reserved
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+

project_Template/Libraries/CMSIS/startup/startup_stm32f10x_md.s

@@ -0,0 +1,308 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name          : startup_stm32f10x_md.s
+;* Author             : MCD Application Team
+;* Version            : V3.5.1
+;* Date               : 08-September-2021
+;* Description        : STM32F10x Medium Density Devices vector table for MDK-ARM 
+;*                      toolchain.  
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Configure the clock system
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM3 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+;*
+;* Copyright (c) 2011 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
+;
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler            ; Window Watchdog
+                DCD     PVD_IRQHandler             ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler          ; Tamper
+                DCD     RTC_IRQHandler             ; RTC
+                DCD     FLASH_IRQHandler           ; Flash
+                DCD     RCC_IRQHandler             ; RCC
+                DCD     EXTI0_IRQHandler           ; EXTI Line 0
+                DCD     EXTI1_IRQHandler           ; EXTI Line 1
+                DCD     EXTI2_IRQHandler           ; EXTI Line 2
+                DCD     EXTI3_IRQHandler           ; EXTI Line 3
+                DCD     EXTI4_IRQHandler           ; EXTI Line 4
+                DCD     DMA1_Channel1_IRQHandler   ; DMA1 Channel 1
+                DCD     DMA1_Channel2_IRQHandler   ; DMA1 Channel 2
+                DCD     DMA1_Channel3_IRQHandler   ; DMA1 Channel 3
+                DCD     DMA1_Channel4_IRQHandler   ; DMA1 Channel 4
+                DCD     DMA1_Channel5_IRQHandler   ; DMA1 Channel 5
+                DCD     DMA1_Channel6_IRQHandler   ; DMA1 Channel 6
+                DCD     DMA1_Channel7_IRQHandler   ; DMA1 Channel 7
+                DCD     ADC1_2_IRQHandler          ; ADC1_2
+                DCD     USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
+                DCD     USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
+                DCD     CAN1_RX1_IRQHandler        ; CAN1 RX1
+                DCD     CAN1_SCE_IRQHandler        ; CAN1 SCE
+                DCD     EXTI9_5_IRQHandler         ; EXTI Line 9..5
+                DCD     TIM1_BRK_IRQHandler        ; TIM1 Break
+                DCD     TIM1_UP_IRQHandler         ; TIM1 Update
+                DCD     TIM1_TRG_COM_IRQHandler    ; TIM1 Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler         ; TIM1 Capture Compare
+                DCD     TIM2_IRQHandler            ; TIM2
+                DCD     TIM3_IRQHandler            ; TIM3
+                DCD     TIM4_IRQHandler            ; TIM4
+                DCD     I2C1_EV_IRQHandler         ; I2C1 Event
+                DCD     I2C1_ER_IRQHandler         ; I2C1 Error
+                DCD     I2C2_EV_IRQHandler         ; I2C2 Event
+                DCD     I2C2_ER_IRQHandler         ; I2C2 Error
+                DCD     SPI1_IRQHandler            ; SPI1
+                DCD     SPI2_IRQHandler            ; SPI2
+                DCD     USART1_IRQHandler          ; USART1
+                DCD     USART2_IRQHandler          ; USART2
+                DCD     USART3_IRQHandler          ; USART3
+                DCD     EXTI15_10_IRQHandler       ; EXTI Line 15..10
+                DCD     RTCAlarm_IRQHandler        ; RTC Alarm through EXTI Line
+                DCD     USBWakeUp_IRQHandler       ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+     IMPORT  __main
+     IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler            [WEAK]
+                EXPORT  PVD_IRQHandler             [WEAK]
+                EXPORT  TAMPER_IRQHandler          [WEAK]
+                EXPORT  RTC_IRQHandler             [WEAK]
+                EXPORT  FLASH_IRQHandler           [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_IRQHandler           [WEAK]
+                EXPORT  EXTI1_IRQHandler           [WEAK]
+                EXPORT  EXTI2_IRQHandler           [WEAK]
+                EXPORT  EXTI3_IRQHandler           [WEAK]
+                EXPORT  EXTI4_IRQHandler           [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel2_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel3_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel4_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel5_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel6_IRQHandler   [WEAK]
+                EXPORT  DMA1_Channel7_IRQHandler   [WEAK]
+                EXPORT  ADC1_2_IRQHandler          [WEAK]
+                EXPORT  USB_HP_CAN1_TX_IRQHandler  [WEAK]
+                EXPORT  USB_LP_CAN1_RX0_IRQHandler [WEAK]
+                EXPORT  CAN1_RX1_IRQHandler        [WEAK]
+                EXPORT  CAN1_SCE_IRQHandler        [WEAK]
+                EXPORT  EXTI9_5_IRQHandler         [WEAK]
+                EXPORT  TIM1_BRK_IRQHandler        [WEAK]
+                EXPORT  TIM1_UP_IRQHandler         [WEAK]
+                EXPORT  TIM1_TRG_COM_IRQHandler    [WEAK]
+                EXPORT  TIM1_CC_IRQHandler         [WEAK]
+                EXPORT  TIM2_IRQHandler            [WEAK]
+                EXPORT  TIM3_IRQHandler            [WEAK]
+                EXPORT  TIM4_IRQHandler            [WEAK]
+                EXPORT  I2C1_EV_IRQHandler         [WEAK]
+                EXPORT  I2C1_ER_IRQHandler         [WEAK]
+                EXPORT  I2C2_EV_IRQHandler         [WEAK]
+                EXPORT  I2C2_ER_IRQHandler         [WEAK]
+                EXPORT  SPI1_IRQHandler            [WEAK]
+                EXPORT  SPI2_IRQHandler            [WEAK]
+                EXPORT  USART1_IRQHandler          [WEAK]
+                EXPORT  USART2_IRQHandler          [WEAK]
+                EXPORT  USART3_IRQHandler          [WEAK]
+                EXPORT  EXTI15_10_IRQHandler       [WEAK]
+                EXPORT  RTCAlarm_IRQHandler        [WEAK]
+                EXPORT  USBWakeUp_IRQHandler       [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB           
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+

project_Template/Libraries/CMSIS/stm32f10x.h

@@ -0,0 +1,8380 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x.h
+  * @author  MCD Application Team
+  * @version V3.5.1
+  * @date    08-September-2021
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer Header File. 
+  *          This file contains all the peripheral register's definitions, bits 
+  *          definitions and memory mapping for STM32F10x Connectivity line, 
+  *          High density, High density value line, Medium density, 
+  *          Medium density Value line, Low density, Low density Value line 
+  *          and XL-density devices.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_STDPERIPH_DRIVER"
+  *              - To change few application-specific parameters such as the HSE 
+  *                crystal frequency
+  *           - Data structures and the address mapping for all peripherals
+  *           - Peripheral's registers declarations and bits definition
+  *           - Macros to access peripheral’s registers hardware
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2011 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x
+  * @{
+  */
+    
+#ifndef __STM32F10x_H
+#define __STM32F10x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+  
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) 
+  /* #define STM32F10X_LD */     /*!< STM32F10X_LD: STM32 Low density devices */
+  /* #define STM32F10X_LD_VL */  /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */
+  /* #define STM32F10X_MD */     /*!< STM32F10X_MD: STM32 Medium density devices */
+  /* #define STM32F10X_MD_VL */  /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */
+  /* #define STM32F10X_HD */     /*!< STM32F10X_HD: STM32 High density devices */
+  /* #define STM32F10X_HD_VL */  /*!< STM32F10X_HD_VL: STM32 High density value line devices */
+  /* #define STM32F10X_XL */     /*!< STM32F10X_XL: STM32 XL-density devices */
+  /* #define STM32F10X_CL */     /*!< STM32F10X_CL: STM32 Connectivity line devices */
+#endif
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+   where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density value line devices are STM32F100xx microcontrollers where the Flash
+   memory density ranges between 16 and 32 Kbytes.
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+   where the Flash memory density ranges between 64 and 128 Kbytes.
+ - Medium-density value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 64 and 128 Kbytes.   
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 256 and 512 Kbytes.   
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+  */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
+ #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"
+#endif
+
+#if !defined  (USE_STDPERIPH_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_STDPERIPH_DRIVER*/
+#endif /* USE_STDPERIPH_DRIVER */
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+   used in your application 
+   
+   Tip: To avoid modifying this file each time you need to use different HSE, you
+        can define the HSE value in your toolchain compiler preprocessor.
+  */           
+#if !defined  HSE_VALUE
+ #ifdef STM32F10X_CL   
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+ #else 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+ #endif /* STM32F10X_CL */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 
+   Timeout value 
+   */
+#if !defined  (HSE_STARTUP_TIMEOUT) 
+  #define HSE_STARTUP_TIMEOUT    ((uint16_t)0x0500)   /*!< Time out for HSE start up */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+#if !defined  (HSI_VALUE)   
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief STM32F10x Standard Peripheral Library version number V3.6.4
+   */
+#define __STM32F10X_STDPERIPH_VERSION_MAIN   (0x03) /*!< [31:24] main version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB1   (0x06) /*!< [23:16] sub1 version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB2   (0x04) /*!< [15:8]  sub2 version */
+#define __STM32F10X_STDPERIPH_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32F10X_STDPERIPH_VERSION        ((__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\
+                                             |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\
+                                             |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\
+                                             |(__STM32F10X_STDPERIPH_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Configuration_section_for_CMSIS
+  * @{
+  */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals 
+ */
+#ifdef STM32F10X_XL
+ #define __MPU_PRESENT             1      /*!< STM32 XL-density devices provide an MPU      */
+#else
+ #define __MPU_PRESENT             0      /*!< Other STM32 devices does not provide an MPU  */
+#endif /* STM32F10X_XL */
+#define __CM3_REV                 0x0200  /*!< Core Revision r2p0                           */
+#define __NVIC_PRIO_BITS          4       /*!< STM32 uses 4 Bits for the Priority Levels    */
+#define __Vendor_SysTickConfig    0       /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @brief STM32F10x Interrupt Number Definition, according to the selected device 
+ *        in @ref Library_configuration_section 
+ */
+typedef enum IRQn
+{
+/******  Cortex-M3 Processor Exceptions Numbers ***************************************************/
+  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                             */
+  MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M3 Memory Management Interrupt              */
+  BusFault_IRQn               = -11,    /*!< 5 Cortex-M3 Bus Fault Interrupt                      */
+  UsageFault_IRQn             = -10,    /*!< 6 Cortex-M3 Usage Fault Interrupt                    */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M3 SV Call Interrupt                       */
+  DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M3 Debug Monitor Interrupt                 */
+  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M3 Pend SV Interrupt                       */
+  SysTick_IRQn                = -1,     /*!< 15 Cortex-M3 System Tick Interrupt                   */
+
+/******  STM32 specific Interrupt Numbers *********************************************************/
+  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                            */
+  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt            */
+  TAMPER_IRQn                 = 2,      /*!< Tamper Interrupt                                     */
+  RTC_IRQn                    = 3,      /*!< RTC global Interrupt                                 */
+  FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                               */
+  RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                 */
+  EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                 */
+  EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                 */
+  EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                 */
+  EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                 */
+  EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                 */
+  DMA1_Channel1_IRQn          = 11,     /*!< DMA1 Channel 1 global Interrupt                      */
+  DMA1_Channel2_IRQn          = 12,     /*!< DMA1 Channel 2 global Interrupt                      */
+  DMA1_Channel3_IRQn          = 13,     /*!< DMA1 Channel 3 global Interrupt                      */
+  DMA1_Channel4_IRQn          = 14,     /*!< DMA1 Channel 4 global Interrupt                      */
+  DMA1_Channel5_IRQn          = 15,     /*!< DMA1 Channel 5 global Interrupt                      */
+  DMA1_Channel6_IRQn          = 16,     /*!< DMA1 Channel 6 global Interrupt                      */
+  DMA1_Channel7_IRQn          = 17,     /*!< DMA1 Channel 7 global Interrupt                      */
+
+#ifdef STM32F10X_LD
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42      /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+#endif /* STM32F10X_LD */  
+
+#ifdef STM32F10X_LD_VL
+  ADC1_IRQn                   = 18,     /*!< ADC1 global Interrupt                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM15_IRQn         = 24,     /*!< TIM1 Break and TIM15 Interrupts                      */
+  TIM1_UP_TIM16_IRQn          = 25,     /*!< TIM1 Update and TIM16 Interrupts                     */
+  TIM1_TRG_COM_TIM17_IRQn     = 26,     /*!< TIM1 Trigger and Commutation and TIM17 Interrupt     */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  CEC_IRQn                    = 42,     /*!< HDMI-CEC Interrupt                                   */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 and DAC underrun Interrupt                      */
+  TIM7_IRQn                   = 55      /*!< TIM7 Interrupt                                       */
+#endif /* STM32F10X_LD_VL */
+
+#ifdef STM32F10X_MD
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42      /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+#endif /* STM32F10X_MD */  
+
+#ifdef STM32F10X_MD_VL
+  ADC1_IRQn                   = 18,     /*!< ADC1 global Interrupt                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM15_IRQn         = 24,     /*!< TIM1 Break and TIM15 Interrupts                      */
+  TIM1_UP_TIM16_IRQn          = 25,     /*!< TIM1 Update and TIM16 Interrupts                     */
+  TIM1_TRG_COM_TIM17_IRQn     = 26,     /*!< TIM1 Trigger and Commutation and TIM17 Interrupt     */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  CEC_IRQn                    = 42,     /*!< HDMI-CEC Interrupt                                   */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 and DAC underrun Interrupt                      */
+  TIM7_IRQn                   = 55      /*!< TIM7 Interrupt                                       */
+#endif /* STM32F10X_MD_VL */
+
+#ifdef STM32F10X_HD
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42,     /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+  TIM8_BRK_IRQn               = 43,     /*!< TIM8 Break Interrupt                                 */
+  TIM8_UP_IRQn                = 44,     /*!< TIM8 Update Interrupt                                */
+  TIM8_TRG_COM_IRQn           = 45,     /*!< TIM8 Trigger and Commutation Interrupt               */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                       */
+  ADC3_IRQn                   = 47,     /*!< ADC3 global Interrupt                                */
+  FSMC_IRQn                   = 48,     /*!< FSMC global Interrupt                                */
+  SDIO_IRQn                   = 49,     /*!< SDIO global Interrupt                                */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_IRQn                   = 54,     /*!< TIM6 global Interrupt                                */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global Interrupt                                */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_5_IRQn        = 59      /*!< DMA2 Channel 4 and Channel 5 global Interrupt        */
+#endif /* STM32F10X_HD */  
+
+#ifdef STM32F10X_HD_VL
+  ADC1_IRQn                   = 18,     /*!< ADC1 global Interrupt                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM15_IRQn         = 24,     /*!< TIM1 Break and TIM15 Interrupts                      */
+  TIM1_UP_TIM16_IRQn          = 25,     /*!< TIM1 Update and TIM16 Interrupts                     */
+  TIM1_TRG_COM_TIM17_IRQn     = 26,     /*!< TIM1 Trigger and Commutation and TIM17 Interrupt     */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  CEC_IRQn                    = 42,     /*!< HDMI-CEC Interrupt                                   */
+  TIM12_IRQn                  = 43,     /*!< TIM12 global Interrupt                               */
+  TIM13_IRQn                  = 44,     /*!< TIM13 global Interrupt                               */
+  TIM14_IRQn                  = 45,     /*!< TIM14 global Interrupt                               */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 and DAC underrun Interrupt                      */
+  TIM7_IRQn                   = 55,     /*!< TIM7 Interrupt                                       */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_5_IRQn        = 59,     /*!< DMA2 Channel 4 and Channel 5 global Interrupt        */
+  DMA2_Channel5_IRQn          = 60      /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is 
+                                             mapped at position 60 only if the MISC_REMAP bit in 
+                                             the AFIO_MAPR2 register is set)                      */
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_XL
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM9_IRQn          = 24,     /*!< TIM1 Break Interrupt and TIM9 global Interrupt       */
+  TIM1_UP_TIM10_IRQn          = 25,     /*!< TIM1 Update Interrupt and TIM10 global Interrupt     */
+  TIM1_TRG_COM_TIM11_IRQn     = 26,     /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42,     /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+  TIM8_BRK_TIM12_IRQn         = 43,     /*!< TIM8 Break Interrupt and TIM12 global Interrupt      */
+  TIM8_UP_TIM13_IRQn          = 44,     /*!< TIM8 Update Interrupt and TIM13 global Interrupt     */
+  TIM8_TRG_COM_TIM14_IRQn     = 45,     /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                       */
+  ADC3_IRQn                   = 47,     /*!< ADC3 global Interrupt                                */
+  FSMC_IRQn                   = 48,     /*!< FSMC global Interrupt                                */
+  SDIO_IRQn                   = 49,     /*!< SDIO global Interrupt                                */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_IRQn                   = 54,     /*!< TIM6 global Interrupt                                */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global Interrupt                                */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_5_IRQn        = 59      /*!< DMA2 Channel 4 and Channel 5 global Interrupt        */
+#endif /* STM32F10X_XL */  
+
+#ifdef STM32F10X_CL
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  CAN1_TX_IRQn                = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  CAN1_RX0_IRQn               = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  OTG_FS_WKUP_IRQn            = 42,     /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_IRQn                   = 54,     /*!< TIM6 global Interrupt                                */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global Interrupt                                */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_IRQn          = 59,     /*!< DMA2 Channel 4 global Interrupt                      */
+  DMA2_Channel5_IRQn          = 60,     /*!< DMA2 Channel 5 global Interrupt                      */
+  ETH_IRQn                    = 61,     /*!< Ethernet global Interrupt                            */
+  ETH_WKUP_IRQn               = 62,     /*!< Ethernet Wakeup through EXTI line Interrupt          */
+  CAN2_TX_IRQn                = 63,     /*!< CAN2 TX Interrupt                                    */
+  CAN2_RX0_IRQn               = 64,     /*!< CAN2 RX0 Interrupt                                   */
+  CAN2_RX1_IRQn               = 65,     /*!< CAN2 RX1 Interrupt                                   */
+  CAN2_SCE_IRQn               = 66,     /*!< CAN2 SCE Interrupt                                   */
+  OTG_FS_IRQn                 = 67      /*!< USB OTG FS global Interrupt                          */
+#endif /* STM32F10X_CL */
+} IRQn_Type;
+
+/**
+  * @}
+  */
+
+#include "core_cm3.h"
+#include "system_stm32f10x.h"
+#include <stdint.h>
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+
+/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
+typedef int32_t  s32;
+typedef int16_t s16;
+typedef int8_t  s8;
+
+typedef const int32_t sc32;  /*!< Read Only */
+typedef const int16_t sc16;  /*!< Read Only */
+typedef const int8_t sc8;   /*!< Read Only */
+
+typedef __IO int32_t  vs32;
+typedef __IO int16_t  vs16;
+typedef __IO int8_t   vs8;
+
+typedef __I int32_t vsc32;  /*!< Read Only */
+typedef __I int16_t vsc16;  /*!< Read Only */
+typedef __I int8_t vsc8;   /*!< Read Only */
+
+typedef uint32_t  u32;
+typedef uint16_t u16;
+typedef uint8_t  u8;
+
+typedef const uint32_t uc32;  /*!< Read Only */
+typedef const uint16_t uc16;  /*!< Read Only */
+typedef const uint8_t uc8;   /*!< Read Only */
+
+typedef __IO uint32_t  vu32;
+typedef __IO uint16_t vu16;
+typedef __IO uint8_t  vu8;
+
+typedef __I uint32_t vuc32;  /*!< Read Only */
+typedef __I uint16_t vuc16;  /*!< Read Only */
+typedef __I uint8_t vuc8;   /*!< Read Only */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */
+#define HSEStartUp_TimeOut   HSE_STARTUP_TIMEOUT
+#define HSE_Value            HSE_VALUE
+#define HSI_Value            HSI_VALUE
+/**
+  * @}
+  */
+
+/** @addtogroup Peripheral_registers_structures
+  * @{
+  */   
+
+/** 
+  * @brief Analog to Digital Converter  
+  */
+
+typedef struct
+{
+  __IO uint32_t SR;
+  __IO uint32_t CR1;
+  __IO uint32_t CR2;
+  __IO uint32_t SMPR1;
+  __IO uint32_t SMPR2;
+  __IO uint32_t JOFR1;
+  __IO uint32_t JOFR2;
+  __IO uint32_t JOFR3;
+  __IO uint32_t JOFR4;
+  __IO uint32_t HTR;
+  __IO uint32_t LTR;
+  __IO uint32_t SQR1;
+  __IO uint32_t SQR2;
+  __IO uint32_t SQR3;
+  __IO uint32_t JSQR;
+  __IO uint32_t JDR1;
+  __IO uint32_t JDR2;
+  __IO uint32_t JDR3;
+  __IO uint32_t JDR4;
+  __IO uint32_t DR;
+} ADC_TypeDef;
+
+/** 
+  * @brief Backup Registers  
+  */
+
+typedef struct
+{
+  uint32_t  RESERVED0;
+  __IO uint16_t DR1;
+  uint16_t  RESERVED1;
+  __IO uint16_t DR2;
+  uint16_t  RESERVED2;
+  __IO uint16_t DR3;
+  uint16_t  RESERVED3;
+  __IO uint16_t DR4;
+  uint16_t  RESERVED4;
+  __IO uint16_t DR5;
+  uint16_t  RESERVED5;
+  __IO uint16_t DR6;
+  uint16_t  RESERVED6;
+  __IO uint16_t DR7;
+  uint16_t  RESERVED7;
+  __IO uint16_t DR8;
+  uint16_t  RESERVED8;
+  __IO uint16_t DR9;
+  uint16_t  RESERVED9;
+  __IO uint16_t DR10;
+  uint16_t  RESERVED10; 
+  __IO uint16_t RTCCR;
+  uint16_t  RESERVED11;
+  __IO uint16_t CR;
+  uint16_t  RESERVED12;
+  __IO uint16_t CSR;
+  uint16_t  RESERVED13[5];
+  __IO uint16_t DR11;
+  uint16_t  RESERVED14;
+  __IO uint16_t DR12;
+  uint16_t  RESERVED15;
+  __IO uint16_t DR13;
+  uint16_t  RESERVED16;
+  __IO uint16_t DR14;
+  uint16_t  RESERVED17;
+  __IO uint16_t DR15;
+  uint16_t  RESERVED18;
+  __IO uint16_t DR16;
+  uint16_t  RESERVED19;
+  __IO uint16_t DR17;
+  uint16_t  RESERVED20;
+  __IO uint16_t DR18;
+  uint16_t  RESERVED21;
+  __IO uint16_t DR19;
+  uint16_t  RESERVED22;
+  __IO uint16_t DR20;
+  uint16_t  RESERVED23;
+  __IO uint16_t DR21;
+  uint16_t  RESERVED24;
+  __IO uint16_t DR22;
+  uint16_t  RESERVED25;
+  __IO uint16_t DR23;
+  uint16_t  RESERVED26;
+  __IO uint16_t DR24;
+  uint16_t  RESERVED27;
+  __IO uint16_t DR25;
+  uint16_t  RESERVED28;
+  __IO uint16_t DR26;
+  uint16_t  RESERVED29;
+  __IO uint16_t DR27;
+  uint16_t  RESERVED30;
+  __IO uint16_t DR28;
+  uint16_t  RESERVED31;
+  __IO uint16_t DR29;
+  uint16_t  RESERVED32;
+  __IO uint16_t DR30;
+  uint16_t  RESERVED33; 
+  __IO uint16_t DR31;
+  uint16_t  RESERVED34;
+  __IO uint16_t DR32;
+  uint16_t  RESERVED35;
+  __IO uint16_t DR33;
+  uint16_t  RESERVED36;
+  __IO uint16_t DR34;
+  uint16_t  RESERVED37;
+  __IO uint16_t DR35;
+  uint16_t  RESERVED38;
+  __IO uint16_t DR36;
+  uint16_t  RESERVED39;
+  __IO uint16_t DR37;
+  uint16_t  RESERVED40;
+  __IO uint16_t DR38;
+  uint16_t  RESERVED41;
+  __IO uint16_t DR39;
+  uint16_t  RESERVED42;
+  __IO uint16_t DR40;
+  uint16_t  RESERVED43;
+  __IO uint16_t DR41;
+  uint16_t  RESERVED44;
+  __IO uint16_t DR42;
+  uint16_t  RESERVED45;    
+} BKP_TypeDef;
+  
+/** 
+  * @brief Controller Area Network TxMailBox 
+  */
+
+typedef struct
+{
+  __IO uint32_t TIR;
+  __IO uint32_t TDTR;
+  __IO uint32_t TDLR;
+  __IO uint32_t TDHR;
+} CAN_TxMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FIFOMailBox 
+  */
+  
+typedef struct
+{
+  __IO uint32_t RIR;
+  __IO uint32_t RDTR;
+  __IO uint32_t RDLR;
+  __IO uint32_t RDHR;
+} CAN_FIFOMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FilterRegister 
+  */
+  
+typedef struct
+{
+  __IO uint32_t FR1;
+  __IO uint32_t FR2;
+} CAN_FilterRegister_TypeDef;
+
+/** 
+  * @brief Controller Area Network 
+  */
+  
+typedef struct
+{
+  __IO uint32_t MCR;
+  __IO uint32_t MSR;
+  __IO uint32_t TSR;
+  __IO uint32_t RF0R;
+  __IO uint32_t RF1R;
+  __IO uint32_t IER;
+  __IO uint32_t ESR;
+  __IO uint32_t BTR;
+  uint32_t  RESERVED0[88];
+  CAN_TxMailBox_TypeDef sTxMailBox[3];
+  CAN_FIFOMailBox_TypeDef sFIFOMailBox[2];
+  uint32_t  RESERVED1[12];
+  __IO uint32_t FMR;
+  __IO uint32_t FM1R;
+  uint32_t  RESERVED2;
+  __IO uint32_t FS1R;
+  uint32_t  RESERVED3;
+  __IO uint32_t FFA1R;
+  uint32_t  RESERVED4;
+  __IO uint32_t FA1R;
+  uint32_t  RESERVED5[8];
+#ifndef STM32F10X_CL
+  CAN_FilterRegister_TypeDef sFilterRegister[14];
+#else
+  CAN_FilterRegister_TypeDef sFilterRegister[28];
+#endif /* STM32F10X_CL */  
+} CAN_TypeDef;
+
+/** 
+  * @brief Consumer Electronics Control (CEC)
+  */
+typedef struct
+{
+  __IO uint32_t CFGR;
+  __IO uint32_t OAR;
+  __IO uint32_t PRES;
+  __IO uint32_t ESR;
+  __IO uint32_t CSR;
+  __IO uint32_t TXD;
+  __IO uint32_t RXD;  
+} CEC_TypeDef;
+
+/** 
+  * @brief CRC calculation unit 
+  */
+
+typedef struct
+{
+  __IO uint32_t DR;
+  __IO uint8_t  IDR;
+  uint8_t   RESERVED0;
+  uint16_t  RESERVED1;
+  __IO uint32_t CR;
+} CRC_TypeDef;
+
+/** 
+  * @brief Digital to Analog Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t SWTRIGR;
+  __IO uint32_t DHR12R1;
+  __IO uint32_t DHR12L1;
+  __IO uint32_t DHR8R1;
+  __IO uint32_t DHR12R2;
+  __IO uint32_t DHR12L2;
+  __IO uint32_t DHR8R2;
+  __IO uint32_t DHR12RD;
+  __IO uint32_t DHR12LD;
+  __IO uint32_t DHR8RD;
+  __IO uint32_t DOR1;
+  __IO uint32_t DOR2;
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+  __IO uint32_t SR;
+#endif
+} DAC_TypeDef;
+
+/** 
+  * @brief Debug MCU
+  */
+
+typedef struct
+{
+  __IO uint32_t IDCODE;
+  __IO uint32_t CR;	
+}DBGMCU_TypeDef;
+
+/** 
+  * @brief DMA Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CCR;
+  __IO uint32_t CNDTR;
+  __IO uint32_t CPAR;
+  __IO uint32_t CMAR;
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t ISR;
+  __IO uint32_t IFCR;
+} DMA_TypeDef;
+
+/** 
+  * @brief Ethernet MAC
+  */
+
+typedef struct
+{
+  __IO uint32_t MACCR;
+  __IO uint32_t MACFFR;
+  __IO uint32_t MACHTHR;
+  __IO uint32_t MACHTLR;
+  __IO uint32_t MACMIIAR;
+  __IO uint32_t MACMIIDR;
+  __IO uint32_t MACFCR;
+  __IO uint32_t MACVLANTR;             /*    8 */
+       uint32_t RESERVED0[2];
+  __IO uint32_t MACRWUFFR;             /*   11 */
+  __IO uint32_t MACPMTCSR;
+       uint32_t RESERVED1[2];
+  __IO uint32_t MACSR;                 /*   15 */
+  __IO uint32_t MACIMR;
+  __IO uint32_t MACA0HR;
+  __IO uint32_t MACA0LR;
+  __IO uint32_t MACA1HR;
+  __IO uint32_t MACA1LR;
+  __IO uint32_t MACA2HR;
+  __IO uint32_t MACA2LR;
+  __IO uint32_t MACA3HR;
+  __IO uint32_t MACA3LR;               /*   24 */
+       uint32_t RESERVED2[40];
+  __IO uint32_t MMCCR;                 /*   65 */
+  __IO uint32_t MMCRIR;
+  __IO uint32_t MMCTIR;
+  __IO uint32_t MMCRIMR;
+  __IO uint32_t MMCTIMR;               /*   69 */
+       uint32_t RESERVED3[14];
+  __IO uint32_t MMCTGFSCCR;            /*   84 */
+  __IO uint32_t MMCTGFMSCCR;
+       uint32_t RESERVED4[5];
+  __IO uint32_t MMCTGFCR;
+       uint32_t RESERVED5[10];
+  __IO uint32_t MMCRFCECR;
+  __IO uint32_t MMCRFAECR;
+       uint32_t RESERVED6[10];
+  __IO uint32_t MMCRGUFCR;
+       uint32_t RESERVED7[334];
+  __IO uint32_t PTPTSCR;
+  __IO uint32_t PTPSSIR;
+  __IO uint32_t PTPTSHR;
+  __IO uint32_t PTPTSLR;
+  __IO uint32_t PTPTSHUR;
+  __IO uint32_t PTPTSLUR;
+  __IO uint32_t PTPTSAR;
+  __IO uint32_t PTPTTHR;
+  __IO uint32_t PTPTTLR;
+       uint32_t RESERVED8[567];
+  __IO uint32_t DMABMR;
+  __IO uint32_t DMATPDR;
+  __IO uint32_t DMARPDR;
+  __IO uint32_t DMARDLAR;
+  __IO uint32_t DMATDLAR;
+  __IO uint32_t DMASR;
+  __IO uint32_t DMAOMR;
+  __IO uint32_t DMAIER;
+  __IO uint32_t DMAMFBOCR;
+       uint32_t RESERVED9[9];
+  __IO uint32_t DMACHTDR;
+  __IO uint32_t DMACHRDR;
+  __IO uint32_t DMACHTBAR;
+  __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/** 
+  * @brief External Interrupt/Event Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t IMR;
+  __IO uint32_t EMR;
+  __IO uint32_t RTSR;
+  __IO uint32_t FTSR;
+  __IO uint32_t SWIER;
+  __IO uint32_t PR;
+} EXTI_TypeDef;
+
+/** 
+  * @brief FLASH Registers
+  */
+
+typedef struct
+{
+  __IO uint32_t ACR;
+  __IO uint32_t KEYR;
+  __IO uint32_t OPTKEYR;
+  __IO uint32_t SR;
+  __IO uint32_t CR;
+  __IO uint32_t AR;
+  __IO uint32_t RESERVED;
+  __IO uint32_t OBR;
+  __IO uint32_t WRPR;
+#ifdef STM32F10X_XL
+  uint32_t RESERVED1[8]; 
+  __IO uint32_t KEYR2;
+  uint32_t RESERVED2;   
+  __IO uint32_t SR2;
+  __IO uint32_t CR2;
+  __IO uint32_t AR2; 
+#endif /* STM32F10X_XL */  
+} FLASH_TypeDef;
+
+/** 
+  * @brief Option Bytes Registers
+  */
+  
+typedef struct
+{
+  __IO uint16_t RDP;
+  __IO uint16_t USER;
+  __IO uint16_t Data0;
+  __IO uint16_t Data1;
+  __IO uint16_t WRP0;
+  __IO uint16_t WRP1;
+  __IO uint16_t WRP2;
+  __IO uint16_t WRP3;
+} OB_TypeDef;
+
+/** 
+  * @brief Flexible Static Memory Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t BTCR[8];   
+} FSMC_Bank1_TypeDef; 
+
+/** 
+  * @brief Flexible Static Memory Controller Bank1E
+  */
+  
+typedef struct
+{
+  __IO uint32_t BWTR[7];
+} FSMC_Bank1E_TypeDef;
+
+/** 
+  * @brief Flexible Static Memory Controller Bank2
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR2;
+  __IO uint32_t SR2;
+  __IO uint32_t PMEM2;
+  __IO uint32_t PATT2;
+  uint32_t  RESERVED0;   
+  __IO uint32_t ECCR2; 
+} FSMC_Bank2_TypeDef;  
+
+/** 
+  * @brief Flexible Static Memory Controller Bank3
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR3;
+  __IO uint32_t SR3;
+  __IO uint32_t PMEM3;
+  __IO uint32_t PATT3;
+  uint32_t  RESERVED0;   
+  __IO uint32_t ECCR3; 
+} FSMC_Bank3_TypeDef; 
+
+/** 
+  * @brief Flexible Static Memory Controller Bank4
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR4;
+  __IO uint32_t SR4;
+  __IO uint32_t PMEM4;
+  __IO uint32_t PATT4;
+  __IO uint32_t PIO4; 
+} FSMC_Bank4_TypeDef; 
+
+/** 
+  * @brief General Purpose I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t CRL;
+  __IO uint32_t CRH;
+  __IO uint32_t IDR;
+  __IO uint32_t ODR;
+  __IO uint32_t BSRR;
+  __IO uint32_t BRR;
+  __IO uint32_t LCKR;
+} GPIO_TypeDef;
+
+/** 
+  * @brief Alternate Function I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t EVCR;
+  __IO uint32_t MAPR;
+  __IO uint32_t EXTICR[4];
+  uint32_t RESERVED0;
+  __IO uint32_t MAPR2;  
+} AFIO_TypeDef;
+/** 
+  * @brief Inter Integrated Circuit Interface
+  */
+
+typedef struct
+{
+  __IO uint16_t CR1;
+  uint16_t  RESERVED0;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED1;
+  __IO uint16_t OAR1;
+  uint16_t  RESERVED2;
+  __IO uint16_t OAR2;
+  uint16_t  RESERVED3;
+  __IO uint16_t DR;
+  uint16_t  RESERVED4;
+  __IO uint16_t SR1;
+  uint16_t  RESERVED5;
+  __IO uint16_t SR2;
+  uint16_t  RESERVED6;
+  __IO uint16_t CCR;
+  uint16_t  RESERVED7;
+  __IO uint16_t TRISE;
+  uint16_t  RESERVED8;
+} I2C_TypeDef;
+
+/** 
+  * @brief Independent WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t KR;
+  __IO uint32_t PR;
+  __IO uint32_t RLR;
+  __IO uint32_t SR;
+} IWDG_TypeDef;
+
+/** 
+  * @brief Power Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t CSR;
+} PWR_TypeDef;
+
+/** 
+  * @brief Reset and Clock Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t CFGR;
+  __IO uint32_t CIR;
+  __IO uint32_t APB2RSTR;
+  __IO uint32_t APB1RSTR;
+  __IO uint32_t AHBENR;
+  __IO uint32_t APB2ENR;
+  __IO uint32_t APB1ENR;
+  __IO uint32_t BDCR;
+  __IO uint32_t CSR;
+
+#ifdef STM32F10X_CL  
+  __IO uint32_t AHBRSTR;
+  __IO uint32_t CFGR2;
+#endif /* STM32F10X_CL */ 
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)   
+  uint32_t RESERVED0;
+  __IO uint32_t CFGR2;
+#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ 
+} RCC_TypeDef;
+
+/** 
+  * @brief Real-Time Clock
+  */
+
+typedef struct
+{
+  __IO uint16_t CRH;
+  uint16_t  RESERVED0;
+  __IO uint16_t CRL;
+  uint16_t  RESERVED1;
+  __IO uint16_t PRLH;
+  uint16_t  RESERVED2;
+  __IO uint16_t PRLL;
+  uint16_t  RESERVED3;
+  __IO uint16_t DIVH;
+  uint16_t  RESERVED4;
+  __IO uint16_t DIVL;
+  uint16_t  RESERVED5;
+  __IO uint16_t CNTH;
+  uint16_t  RESERVED6;
+  __IO uint16_t CNTL;
+  uint16_t  RESERVED7;
+  __IO uint16_t ALRH;
+  uint16_t  RESERVED8;
+  __IO uint16_t ALRL;
+  uint16_t  RESERVED9;
+} RTC_TypeDef;
+
+/** 
+  * @brief SD host Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t POWER;
+  __IO uint32_t CLKCR;
+  __IO uint32_t ARG;
+  __IO uint32_t CMD;
+  __I uint32_t RESPCMD;
+  __I uint32_t RESP1;
+  __I uint32_t RESP2;
+  __I uint32_t RESP3;
+  __I uint32_t RESP4;
+  __IO uint32_t DTIMER;
+  __IO uint32_t DLEN;
+  __IO uint32_t DCTRL;
+  __I uint32_t DCOUNT;
+  __I uint32_t STA;
+  __IO uint32_t ICR;
+  __IO uint32_t MASK;
+  uint32_t  RESERVED0[2];
+  __I uint32_t FIFOCNT;
+  uint32_t  RESERVED1[13];
+  __IO uint32_t FIFO;
+} SDIO_TypeDef;
+
+/** 
+  * @brief Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint16_t CR1;
+  uint16_t  RESERVED0;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED1;
+  __IO uint16_t SR;
+  uint16_t  RESERVED2;
+  __IO uint16_t DR;
+  uint16_t  RESERVED3;
+  __IO uint16_t CRCPR;
+  uint16_t  RESERVED4;
+  __IO uint16_t RXCRCR;
+  uint16_t  RESERVED5;
+  __IO uint16_t TXCRCR;
+  uint16_t  RESERVED6;
+  __IO uint16_t I2SCFGR;
+  uint16_t  RESERVED7;
+  __IO uint16_t I2SPR;
+  uint16_t  RESERVED8;  
+} SPI_TypeDef;
+
+/** 
+  * @brief TIM
+  */
+
+typedef struct
+{
+  __IO uint16_t CR1;
+  uint16_t  RESERVED0;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED1;
+  __IO uint16_t SMCR;
+  uint16_t  RESERVED2;
+  __IO uint16_t DIER;
+  uint16_t  RESERVED3;
+  __IO uint16_t SR;
+  uint16_t  RESERVED4;
+  __IO uint16_t EGR;
+  uint16_t  RESERVED5;
+  __IO uint16_t CCMR1;
+  uint16_t  RESERVED6;
+  __IO uint16_t CCMR2;
+  uint16_t  RESERVED7;
+  __IO uint16_t CCER;
+  uint16_t  RESERVED8;
+  __IO uint16_t CNT;
+  uint16_t  RESERVED9;
+  __IO uint16_t PSC;
+  uint16_t  RESERVED10;
+  __IO uint16_t ARR;
+  uint16_t  RESERVED11;
+  __IO uint16_t RCR;
+  uint16_t  RESERVED12;
+  __IO uint16_t CCR1;
+  uint16_t  RESERVED13;
+  __IO uint16_t CCR2;
+  uint16_t  RESERVED14;
+  __IO uint16_t CCR3;
+  uint16_t  RESERVED15;
+  __IO uint16_t CCR4;
+  uint16_t  RESERVED16;
+  __IO uint16_t BDTR;
+  uint16_t  RESERVED17;
+  __IO uint16_t DCR;
+  uint16_t  RESERVED18;
+  __IO uint16_t DMAR;
+  uint16_t  RESERVED19;
+} TIM_TypeDef;
+
+/** 
+  * @brief Universal Synchronous Asynchronous Receiver Transmitter
+  */
+ 
+typedef struct
+{
+  __IO uint16_t SR;
+  uint16_t  RESERVED0;
+  __IO uint16_t DR;
+  uint16_t  RESERVED1;
+  __IO uint16_t BRR;
+  uint16_t  RESERVED2;
+  __IO uint16_t CR1;
+  uint16_t  RESERVED3;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED4;
+  __IO uint16_t CR3;
+  uint16_t  RESERVED5;
+  __IO uint16_t GTPR;
+  uint16_t  RESERVED6;
+} USART_TypeDef;
+
+/** 
+  * @brief Window WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t CFR;
+  __IO uint32_t SR;
+} WWDG_TypeDef;
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Peripheral_memory_map
+  * @{
+  */
+
+
+#define FLASH_BASE            ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE             ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE           ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+#define SRAM_BB_BASE          ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
+#define PERIPH_BB_BASE        ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+#define FSMC_R_BASE           ((uint32_t)0xA0000000) /*!< FSMC registers base address */
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE       PERIPH_BASE
+#define APB2PERIPH_BASE       (PERIPH_BASE + 0x10000)
+#define AHBPERIPH_BASE        (PERIPH_BASE + 0x20000)
+
+#define TIM2_BASE             (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE             (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE             (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE             (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE             (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE             (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE            (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE            (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE            (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE              (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE             (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE             (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE             (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE             (APB1PERIPH_BASE + 0x3C00)
+#define USART2_BASE           (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE           (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE            (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE            (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE             (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE             (APB1PERIPH_BASE + 0x5800)
+#define CAN1_BASE             (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE             (APB1PERIPH_BASE + 0x6800)
+#define BKP_BASE              (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE              (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE              (APB1PERIPH_BASE + 0x7400)
+#define CEC_BASE              (APB1PERIPH_BASE + 0x7800)
+
+#define AFIO_BASE             (APB2PERIPH_BASE + 0x0000)
+#define EXTI_BASE             (APB2PERIPH_BASE + 0x0400)
+#define GPIOA_BASE            (APB2PERIPH_BASE + 0x0800)
+#define GPIOB_BASE            (APB2PERIPH_BASE + 0x0C00)
+#define GPIOC_BASE            (APB2PERIPH_BASE + 0x1000)
+#define GPIOD_BASE            (APB2PERIPH_BASE + 0x1400)
+#define GPIOE_BASE            (APB2PERIPH_BASE + 0x1800)
+#define GPIOF_BASE            (APB2PERIPH_BASE + 0x1C00)
+#define GPIOG_BASE            (APB2PERIPH_BASE + 0x2000)
+#define ADC1_BASE             (APB2PERIPH_BASE + 0x2400)
+#define ADC2_BASE             (APB2PERIPH_BASE + 0x2800)
+#define TIM1_BASE             (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE             (APB2PERIPH_BASE + 0x3000)
+#define TIM8_BASE             (APB2PERIPH_BASE + 0x3400)
+#define USART1_BASE           (APB2PERIPH_BASE + 0x3800)
+#define ADC3_BASE             (APB2PERIPH_BASE + 0x3C00)
+#define TIM15_BASE            (APB2PERIPH_BASE + 0x4000)
+#define TIM16_BASE            (APB2PERIPH_BASE + 0x4400)
+#define TIM17_BASE            (APB2PERIPH_BASE + 0x4800)
+#define TIM9_BASE             (APB2PERIPH_BASE + 0x4C00)
+#define TIM10_BASE            (APB2PERIPH_BASE + 0x5000)
+#define TIM11_BASE            (APB2PERIPH_BASE + 0x5400)
+
+#define SDIO_BASE             (PERIPH_BASE + 0x18000)
+
+#define DMA1_BASE             (AHBPERIPH_BASE + 0x0000)
+#define DMA1_Channel1_BASE    (AHBPERIPH_BASE + 0x0008)
+#define DMA1_Channel2_BASE    (AHBPERIPH_BASE + 0x001C)
+#define DMA1_Channel3_BASE    (AHBPERIPH_BASE + 0x0030)
+#define DMA1_Channel4_BASE    (AHBPERIPH_BASE + 0x0044)
+#define DMA1_Channel5_BASE    (AHBPERIPH_BASE + 0x0058)
+#define DMA1_Channel6_BASE    (AHBPERIPH_BASE + 0x006C)
+#define DMA1_Channel7_BASE    (AHBPERIPH_BASE + 0x0080)
+#define DMA2_BASE             (AHBPERIPH_BASE + 0x0400)
+#define DMA2_Channel1_BASE    (AHBPERIPH_BASE + 0x0408)
+#define DMA2_Channel2_BASE    (AHBPERIPH_BASE + 0x041C)
+#define DMA2_Channel3_BASE    (AHBPERIPH_BASE + 0x0430)
+#define DMA2_Channel4_BASE    (AHBPERIPH_BASE + 0x0444)
+#define DMA2_Channel5_BASE    (AHBPERIPH_BASE + 0x0458)
+#define RCC_BASE              (AHBPERIPH_BASE + 0x1000)
+#define CRC_BASE              (AHBPERIPH_BASE + 0x3000)
+
+#define FLASH_R_BASE          (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */
+#define OB_BASE               ((uint32_t)0x1FFFF800)    /*!< Flash Option Bytes base address */
+
+#define ETH_BASE              (AHBPERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE          (ETH_BASE)
+#define ETH_MMC_BASE          (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE          (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE          (ETH_BASE + 0x1000)
+
+#define FSMC_Bank1_R_BASE     (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */
+#define FSMC_Bank1E_R_BASE    (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */
+#define FSMC_Bank2_R_BASE     (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */
+#define FSMC_Bank3_R_BASE     (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */
+#define FSMC_Bank4_R_BASE     (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */
+
+#define DBGMCU_BASE          ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Peripheral_declaration
+  * @{
+  */  
+
+#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3                ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4                ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5                ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7                ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12               ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13               ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14               ((TIM_TypeDef *) TIM14_BASE)
+#define RTC                 ((RTC_TypeDef *) RTC_BASE)
+#define WWDG                ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG                ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2                ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3                ((SPI_TypeDef *) SPI3_BASE)
+#define USART2              ((USART_TypeDef *) USART2_BASE)
+#define USART3              ((USART_TypeDef *) USART3_BASE)
+#define UART4               ((USART_TypeDef *) UART4_BASE)
+#define UART5               ((USART_TypeDef *) UART5_BASE)
+#define I2C1                ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2                ((I2C_TypeDef *) I2C2_BASE)
+#define CAN1                ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2                ((CAN_TypeDef *) CAN2_BASE)
+#define BKP                 ((BKP_TypeDef *) BKP_BASE)
+#define PWR                 ((PWR_TypeDef *) PWR_BASE)
+#define DAC                 ((DAC_TypeDef *) DAC_BASE)
+#define CEC                 ((CEC_TypeDef *) CEC_BASE)
+#define AFIO                ((AFIO_TypeDef *) AFIO_BASE)
+#define EXTI                ((EXTI_TypeDef *) EXTI_BASE)
+#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB               ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC               ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD               ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE               ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF               ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG               ((GPIO_TypeDef *) GPIOG_BASE)
+#define ADC1                ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2                ((ADC_TypeDef *) ADC2_BASE)
+#define TIM1                ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1                ((SPI_TypeDef *) SPI1_BASE)
+#define TIM8                ((TIM_TypeDef *) TIM8_BASE)
+#define USART1              ((USART_TypeDef *) USART1_BASE)
+#define ADC3                ((ADC_TypeDef *) ADC3_BASE)
+#define TIM15               ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16               ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17               ((TIM_TypeDef *) TIM17_BASE)
+#define TIM9                ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10               ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11               ((TIM_TypeDef *) TIM11_BASE)
+#define SDIO                ((SDIO_TypeDef *) SDIO_BASE)
+#define DMA1                ((DMA_TypeDef *) DMA1_BASE)
+#define DMA2                ((DMA_TypeDef *) DMA2_BASE)
+#define DMA1_Channel1       ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2       ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3       ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4       ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5       ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6       ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7       ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2_Channel1       ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2       ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3       ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4       ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5       ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define RCC                 ((RCC_TypeDef *) RCC_BASE)
+#define CRC                 ((CRC_TypeDef *) CRC_BASE)
+#define FLASH               ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB                  ((OB_TypeDef *) OB_BASE) 
+#define ETH                 ((ETH_TypeDef *) ETH_BASE)
+#define FSMC_Bank1          ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E         ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2          ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE)
+#define FSMC_Bank3          ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE)
+#define FSMC_Bank4          ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+#define DBGMCU              ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_constants
+  * @{
+  */
+  
+  /** @addtogroup Peripheral_Registers_Bits_Definition
+  * @{
+  */
+    
+/******************************************************************************/
+/*                         Peripheral Registers_Bits_Definition               */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                          CRC calculation unit                              */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for CRC_DR register  *********************/
+#define  CRC_DR_DR                           ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/*******************  Bit definition for CRC_IDR register  ********************/
+#define  CRC_IDR_IDR                         ((uint8_t)0xFF)        /*!< General-purpose 8-bit data register bits */
+
+
+/********************  Bit definition for CRC_CR register  ********************/
+#define  CRC_CR_RESET                        ((uint8_t)0x01)        /*!< RESET bit */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Power Control                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for PWR_CR register  ********************/
+#define  PWR_CR_LPDS                         ((uint16_t)0x0001)     /*!< Low-Power Deepsleep */
+#define  PWR_CR_PDDS                         ((uint16_t)0x0002)     /*!< Power Down Deepsleep */
+#define  PWR_CR_CWUF                         ((uint16_t)0x0004)     /*!< Clear Wakeup Flag */
+#define  PWR_CR_CSBF                         ((uint16_t)0x0008)     /*!< Clear Standby Flag */
+#define  PWR_CR_PVDE                         ((uint16_t)0x0010)     /*!< Power Voltage Detector Enable */
+
+#define  PWR_CR_PLS                          ((uint16_t)0x00E0)     /*!< PLS[2:0] bits (PVD Level Selection) */
+#define  PWR_CR_PLS_0                        ((uint16_t)0x0020)     /*!< Bit 0 */
+#define  PWR_CR_PLS_1                        ((uint16_t)0x0040)     /*!< Bit 1 */
+#define  PWR_CR_PLS_2                        ((uint16_t)0x0080)     /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define  PWR_CR_PLS_2V2                      ((uint16_t)0x0000)     /*!< PVD level 2.2V */
+#define  PWR_CR_PLS_2V3                      ((uint16_t)0x0020)     /*!< PVD level 2.3V */
+#define  PWR_CR_PLS_2V4                      ((uint16_t)0x0040)     /*!< PVD level 2.4V */
+#define  PWR_CR_PLS_2V5                      ((uint16_t)0x0060)     /*!< PVD level 2.5V */
+#define  PWR_CR_PLS_2V6                      ((uint16_t)0x0080)     /*!< PVD level 2.6V */
+#define  PWR_CR_PLS_2V7                      ((uint16_t)0x00A0)     /*!< PVD level 2.7V */
+#define  PWR_CR_PLS_2V8                      ((uint16_t)0x00C0)     /*!< PVD level 2.8V */
+#define  PWR_CR_PLS_2V9                      ((uint16_t)0x00E0)     /*!< PVD level 2.9V */
+
+#define  PWR_CR_DBP                          ((uint16_t)0x0100)     /*!< Disable Backup Domain write protection */
+
+
+/*******************  Bit definition for PWR_CSR register  ********************/
+#define  PWR_CSR_WUF                         ((uint16_t)0x0001)     /*!< Wakeup Flag */
+#define  PWR_CSR_SBF                         ((uint16_t)0x0002)     /*!< Standby Flag */
+#define  PWR_CSR_PVDO                        ((uint16_t)0x0004)     /*!< PVD Output */
+#define  PWR_CSR_EWUP                        ((uint16_t)0x0100)     /*!< Enable WKUP pin */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Backup registers                                */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for BKP_DR1 register  ********************/
+#define  BKP_DR1_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR2 register  ********************/
+#define  BKP_DR2_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR3 register  ********************/
+#define  BKP_DR3_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR4 register  ********************/
+#define  BKP_DR4_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR5 register  ********************/
+#define  BKP_DR5_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR6 register  ********************/
+#define  BKP_DR6_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR7 register  ********************/
+#define  BKP_DR7_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR8 register  ********************/
+#define  BKP_DR8_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR9 register  ********************/
+#define  BKP_DR9_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR10 register  *******************/
+#define  BKP_DR10_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR11 register  *******************/
+#define  BKP_DR11_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR12 register  *******************/
+#define  BKP_DR12_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR13 register  *******************/
+#define  BKP_DR13_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR14 register  *******************/
+#define  BKP_DR14_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR15 register  *******************/
+#define  BKP_DR15_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR16 register  *******************/
+#define  BKP_DR16_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR17 register  *******************/
+#define  BKP_DR17_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/******************  Bit definition for BKP_DR18 register  ********************/
+#define  BKP_DR18_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR19 register  *******************/
+#define  BKP_DR19_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR20 register  *******************/
+#define  BKP_DR20_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR21 register  *******************/
+#define  BKP_DR21_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR22 register  *******************/
+#define  BKP_DR22_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR23 register  *******************/
+#define  BKP_DR23_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR24 register  *******************/
+#define  BKP_DR24_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR25 register  *******************/
+#define  BKP_DR25_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR26 register  *******************/
+#define  BKP_DR26_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR27 register  *******************/
+#define  BKP_DR27_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR28 register  *******************/
+#define  BKP_DR28_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR29 register  *******************/
+#define  BKP_DR29_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR30 register  *******************/
+#define  BKP_DR30_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR31 register  *******************/
+#define  BKP_DR31_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR32 register  *******************/
+#define  BKP_DR32_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR33 register  *******************/
+#define  BKP_DR33_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR34 register  *******************/
+#define  BKP_DR34_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR35 register  *******************/
+#define  BKP_DR35_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR36 register  *******************/
+#define  BKP_DR36_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR37 register  *******************/
+#define  BKP_DR37_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR38 register  *******************/
+#define  BKP_DR38_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR39 register  *******************/
+#define  BKP_DR39_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR40 register  *******************/
+#define  BKP_DR40_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR41 register  *******************/
+#define  BKP_DR41_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR42 register  *******************/
+#define  BKP_DR42_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/******************  Bit definition for BKP_RTCCR register  *******************/
+#define  BKP_RTCCR_CAL                       ((uint16_t)0x007F)     /*!< Calibration value */
+#define  BKP_RTCCR_CCO                       ((uint16_t)0x0080)     /*!< Calibration Clock Output */
+#define  BKP_RTCCR_ASOE                      ((uint16_t)0x0100)     /*!< Alarm or Second Output Enable */
+#define  BKP_RTCCR_ASOS                      ((uint16_t)0x0200)     /*!< Alarm or Second Output Selection */
+
+/********************  Bit definition for BKP_CR register  ********************/
+#define  BKP_CR_TPE                          ((uint8_t)0x01)        /*!< TAMPER pin enable */
+#define  BKP_CR_TPAL                         ((uint8_t)0x02)        /*!< TAMPER pin active level */
+
+/*******************  Bit definition for BKP_CSR register  ********************/
+#define  BKP_CSR_CTE                         ((uint16_t)0x0001)     /*!< Clear Tamper event */
+#define  BKP_CSR_CTI                         ((uint16_t)0x0002)     /*!< Clear Tamper Interrupt */
+#define  BKP_CSR_TPIE                        ((uint16_t)0x0004)     /*!< TAMPER Pin interrupt enable */
+#define  BKP_CSR_TEF                         ((uint16_t)0x0100)     /*!< Tamper Event Flag */
+#define  BKP_CSR_TIF                         ((uint16_t)0x0200)     /*!< Tamper Interrupt Flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Reset and Clock Control                            */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for RCC_CR register  ********************/
+#define  RCC_CR_HSION                        ((uint32_t)0x00000001)        /*!< Internal High Speed clock enable */
+#define  RCC_CR_HSIRDY                       ((uint32_t)0x00000002)        /*!< Internal High Speed clock ready flag */
+#define  RCC_CR_HSITRIM                      ((uint32_t)0x000000F8)        /*!< Internal High Speed clock trimming */
+#define  RCC_CR_HSICAL                       ((uint32_t)0x0000FF00)        /*!< Internal High Speed clock Calibration */
+#define  RCC_CR_HSEON                        ((uint32_t)0x00010000)        /*!< External High Speed clock enable */
+#define  RCC_CR_HSERDY                       ((uint32_t)0x00020000)        /*!< External High Speed clock ready flag */
+#define  RCC_CR_HSEBYP                       ((uint32_t)0x00040000)        /*!< External High Speed clock Bypass */
+#define  RCC_CR_CSSON                        ((uint32_t)0x00080000)        /*!< Clock Security System enable */
+#define  RCC_CR_PLLON                        ((uint32_t)0x01000000)        /*!< PLL enable */
+#define  RCC_CR_PLLRDY                       ((uint32_t)0x02000000)        /*!< PLL clock ready flag */
+
+#ifdef STM32F10X_CL
+ #define  RCC_CR_PLL2ON                       ((uint32_t)0x04000000)        /*!< PLL2 enable */
+ #define  RCC_CR_PLL2RDY                      ((uint32_t)0x08000000)        /*!< PLL2 clock ready flag */
+ #define  RCC_CR_PLL3ON                       ((uint32_t)0x10000000)        /*!< PLL3 enable */
+ #define  RCC_CR_PLL3RDY                      ((uint32_t)0x20000000)        /*!< PLL3 clock ready flag */
+#endif /* STM32F10X_CL */
+
+/*******************  Bit definition for RCC_CFGR register  *******************/
+/*!< SW configuration */
+#define  RCC_CFGR_SW                         ((uint32_t)0x00000003)        /*!< SW[1:0] bits (System clock Switch) */
+#define  RCC_CFGR_SW_0                       ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  RCC_CFGR_SW_1                       ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SW_HSI                     ((uint32_t)0x00000000)        /*!< HSI selected as system clock */
+#define  RCC_CFGR_SW_HSE                     ((uint32_t)0x00000001)        /*!< HSE selected as system clock */
+#define  RCC_CFGR_SW_PLL                     ((uint32_t)0x00000002)        /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define  RCC_CFGR_SWS                        ((uint32_t)0x0000000C)        /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define  RCC_CFGR_SWS_0                      ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  RCC_CFGR_SWS_1                      ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SWS_HSI                    ((uint32_t)0x00000000)        /*!< HSI oscillator used as system clock */
+#define  RCC_CFGR_SWS_HSE                    ((uint32_t)0x00000004)        /*!< HSE oscillator used as system clock */
+#define  RCC_CFGR_SWS_PLL                    ((uint32_t)0x00000008)        /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define  RCC_CFGR_HPRE                       ((uint32_t)0x000000F0)        /*!< HPRE[3:0] bits (AHB prescaler) */
+#define  RCC_CFGR_HPRE_0                     ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  RCC_CFGR_HPRE_1                     ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  RCC_CFGR_HPRE_2                     ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  RCC_CFGR_HPRE_3                     ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  RCC_CFGR_HPRE_DIV1                  ((uint32_t)0x00000000)        /*!< SYSCLK not divided */
+#define  RCC_CFGR_HPRE_DIV2                  ((uint32_t)0x00000080)        /*!< SYSCLK divided by 2 */
+#define  RCC_CFGR_HPRE_DIV4                  ((uint32_t)0x00000090)        /*!< SYSCLK divided by 4 */
+#define  RCC_CFGR_HPRE_DIV8                  ((uint32_t)0x000000A0)        /*!< SYSCLK divided by 8 */
+#define  RCC_CFGR_HPRE_DIV16                 ((uint32_t)0x000000B0)        /*!< SYSCLK divided by 16 */
+#define  RCC_CFGR_HPRE_DIV64                 ((uint32_t)0x000000C0)        /*!< SYSCLK divided by 64 */
+#define  RCC_CFGR_HPRE_DIV128                ((uint32_t)0x000000D0)        /*!< SYSCLK divided by 128 */
+#define  RCC_CFGR_HPRE_DIV256                ((uint32_t)0x000000E0)        /*!< SYSCLK divided by 256 */
+#define  RCC_CFGR_HPRE_DIV512                ((uint32_t)0x000000F0)        /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define  RCC_CFGR_PPRE1                      ((uint32_t)0x00000700)        /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define  RCC_CFGR_PPRE1_0                    ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE1_1                    ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE1_2                    ((uint32_t)0x00000400)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE1_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE1_DIV2                 ((uint32_t)0x00000400)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE1_DIV4                 ((uint32_t)0x00000500)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE1_DIV8                 ((uint32_t)0x00000600)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE1_DIV16                ((uint32_t)0x00000700)        /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define  RCC_CFGR_PPRE2                      ((uint32_t)0x00003800)        /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define  RCC_CFGR_PPRE2_0                    ((uint32_t)0x00000800)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE2_1                    ((uint32_t)0x00001000)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE2_2                    ((uint32_t)0x00002000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE2_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE2_DIV2                 ((uint32_t)0x00002000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE2_DIV4                 ((uint32_t)0x00002800)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE2_DIV8                 ((uint32_t)0x00003000)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE2_DIV16                ((uint32_t)0x00003800)        /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define  RCC_CFGR_ADCPRE                     ((uint32_t)0x0000C000)        /*!< ADCPRE[1:0] bits (ADC prescaler) */
+#define  RCC_CFGR_ADCPRE_0                   ((uint32_t)0x00004000)        /*!< Bit 0 */
+#define  RCC_CFGR_ADCPRE_1                   ((uint32_t)0x00008000)        /*!< Bit 1 */
+
+#define  RCC_CFGR_ADCPRE_DIV2                ((uint32_t)0x00000000)        /*!< PCLK2 divided by 2 */
+#define  RCC_CFGR_ADCPRE_DIV4                ((uint32_t)0x00004000)        /*!< PCLK2 divided by 4 */
+#define  RCC_CFGR_ADCPRE_DIV6                ((uint32_t)0x00008000)        /*!< PCLK2 divided by 6 */
+#define  RCC_CFGR_ADCPRE_DIV8                ((uint32_t)0x0000C000)        /*!< PCLK2 divided by 8 */
+
+#define  RCC_CFGR_PLLSRC                     ((uint32_t)0x00010000)        /*!< PLL entry clock source */
+
+#define  RCC_CFGR_PLLXTPRE                   ((uint32_t)0x00020000)        /*!< HSE divider for PLL entry */
+
+/*!< PLLMUL configuration */
+#define  RCC_CFGR_PLLMULL                    ((uint32_t)0x003C0000)        /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define  RCC_CFGR_PLLMULL_0                  ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  RCC_CFGR_PLLMULL_1                  ((uint32_t)0x00080000)        /*!< Bit 1 */
+#define  RCC_CFGR_PLLMULL_2                  ((uint32_t)0x00100000)        /*!< Bit 2 */
+#define  RCC_CFGR_PLLMULL_3                  ((uint32_t)0x00200000)        /*!< Bit 3 */
+
+#ifdef STM32F10X_CL
+ #define  RCC_CFGR_PLLSRC_HSI_Div2           ((uint32_t)0x00000000)        /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define  RCC_CFGR_PLLSRC_PREDIV1            ((uint32_t)0x00010000)        /*!< PREDIV1 clock selected as PLL entry clock source */
+
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1          ((uint32_t)0x00000000)        /*!< PREDIV1 clock not divided for PLL entry */
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1_Div2     ((uint32_t)0x00020000)        /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+ #define  RCC_CFGR_PLLMULL4                  ((uint32_t)0x00080000)        /*!< PLL input clock * 4 */
+ #define  RCC_CFGR_PLLMULL5                  ((uint32_t)0x000C0000)        /*!< PLL input clock * 5 */
+ #define  RCC_CFGR_PLLMULL6                  ((uint32_t)0x00100000)        /*!< PLL input clock * 6 */
+ #define  RCC_CFGR_PLLMULL7                  ((uint32_t)0x00140000)        /*!< PLL input clock * 7 */
+ #define  RCC_CFGR_PLLMULL8                  ((uint32_t)0x00180000)        /*!< PLL input clock * 8 */
+ #define  RCC_CFGR_PLLMULL9                  ((uint32_t)0x001C0000)        /*!< PLL input clock * 9 */
+ #define  RCC_CFGR_PLLMULL6_5                ((uint32_t)0x00340000)        /*!< PLL input clock * 6.5 */
+ 
+ #define  RCC_CFGR_OTGFSPRE                  ((uint32_t)0x00400000)        /*!< USB OTG FS prescaler */
+ 
+/*!< MCO configuration */
+ #define  RCC_CFGR_MCO                       ((uint32_t)0x0F000000)        /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+ #define  RCC_CFGR_MCO_0                     ((uint32_t)0x01000000)        /*!< Bit 0 */
+ #define  RCC_CFGR_MCO_1                     ((uint32_t)0x02000000)        /*!< Bit 1 */
+ #define  RCC_CFGR_MCO_2                     ((uint32_t)0x04000000)        /*!< Bit 2 */
+ #define  RCC_CFGR_MCO_3                     ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+ #define  RCC_CFGR_MCO_NOCLOCK               ((uint32_t)0x00000000)        /*!< No clock */
+ #define  RCC_CFGR_MCO_SYSCLK                ((uint32_t)0x04000000)        /*!< System clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSI                   ((uint32_t)0x05000000)        /*!< HSI clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSE                   ((uint32_t)0x06000000)        /*!< HSE clock selected as MCO source */
+ #define  RCC_CFGR_MCO_PLLCLK_Div2           ((uint32_t)0x07000000)        /*!< PLL clock divided by 2 selected as MCO source */
+ #define  RCC_CFGR_MCO_PLL2CLK               ((uint32_t)0x08000000)        /*!< PLL2 clock selected as MCO source*/
+ #define  RCC_CFGR_MCO_PLL3CLK_Div2          ((uint32_t)0x09000000)        /*!< PLL3 clock divided by 2 selected as MCO source*/
+ #define  RCC_CFGR_MCO_Ext_HSE               ((uint32_t)0x0A000000)        /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */
+ #define  RCC_CFGR_MCO_PLL3CLK               ((uint32_t)0x0B000000)        /*!< PLL3 clock selected as MCO source */
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ #define  RCC_CFGR_PLLSRC_HSI_Div2           ((uint32_t)0x00000000)        /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define  RCC_CFGR_PLLSRC_PREDIV1            ((uint32_t)0x00010000)        /*!< PREDIV1 clock selected as PLL entry clock source */
+
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1          ((uint32_t)0x00000000)        /*!< PREDIV1 clock not divided for PLL entry */
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1_Div2     ((uint32_t)0x00020000)        /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+ #define  RCC_CFGR_PLLMULL2                  ((uint32_t)0x00000000)        /*!< PLL input clock*2 */
+ #define  RCC_CFGR_PLLMULL3                  ((uint32_t)0x00040000)        /*!< PLL input clock*3 */
+ #define  RCC_CFGR_PLLMULL4                  ((uint32_t)0x00080000)        /*!< PLL input clock*4 */
+ #define  RCC_CFGR_PLLMULL5                  ((uint32_t)0x000C0000)        /*!< PLL input clock*5 */
+ #define  RCC_CFGR_PLLMULL6                  ((uint32_t)0x00100000)        /*!< PLL input clock*6 */
+ #define  RCC_CFGR_PLLMULL7                  ((uint32_t)0x00140000)        /*!< PLL input clock*7 */
+ #define  RCC_CFGR_PLLMULL8                  ((uint32_t)0x00180000)        /*!< PLL input clock*8 */
+ #define  RCC_CFGR_PLLMULL9                  ((uint32_t)0x001C0000)        /*!< PLL input clock*9 */
+ #define  RCC_CFGR_PLLMULL10                 ((uint32_t)0x00200000)        /*!< PLL input clock10 */
+ #define  RCC_CFGR_PLLMULL11                 ((uint32_t)0x00240000)        /*!< PLL input clock*11 */
+ #define  RCC_CFGR_PLLMULL12                 ((uint32_t)0x00280000)        /*!< PLL input clock*12 */
+ #define  RCC_CFGR_PLLMULL13                 ((uint32_t)0x002C0000)        /*!< PLL input clock*13 */
+ #define  RCC_CFGR_PLLMULL14                 ((uint32_t)0x00300000)        /*!< PLL input clock*14 */
+ #define  RCC_CFGR_PLLMULL15                 ((uint32_t)0x00340000)        /*!< PLL input clock*15 */
+ #define  RCC_CFGR_PLLMULL16                 ((uint32_t)0x00380000)        /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+ #define  RCC_CFGR_MCO                       ((uint32_t)0x07000000)        /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+ #define  RCC_CFGR_MCO_0                     ((uint32_t)0x01000000)        /*!< Bit 0 */
+ #define  RCC_CFGR_MCO_1                     ((uint32_t)0x02000000)        /*!< Bit 1 */
+ #define  RCC_CFGR_MCO_2                     ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+ #define  RCC_CFGR_MCO_NOCLOCK               ((uint32_t)0x00000000)        /*!< No clock */
+ #define  RCC_CFGR_MCO_SYSCLK                ((uint32_t)0x04000000)        /*!< System clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSI                   ((uint32_t)0x05000000)        /*!< HSI clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSE                   ((uint32_t)0x06000000)        /*!< HSE clock selected as MCO source  */
+ #define  RCC_CFGR_MCO_PLL                   ((uint32_t)0x07000000)        /*!< PLL clock divided by 2 selected as MCO source */
+#else
+ #define  RCC_CFGR_PLLSRC_HSI_Div2           ((uint32_t)0x00000000)        /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define  RCC_CFGR_PLLSRC_HSE                ((uint32_t)0x00010000)        /*!< HSE clock selected as PLL entry clock source */
+
+ #define  RCC_CFGR_PLLXTPRE_HSE              ((uint32_t)0x00000000)        /*!< HSE clock not divided for PLL entry */
+ #define  RCC_CFGR_PLLXTPRE_HSE_Div2         ((uint32_t)0x00020000)        /*!< HSE clock divided by 2 for PLL entry */
+
+ #define  RCC_CFGR_PLLMULL2                  ((uint32_t)0x00000000)        /*!< PLL input clock*2 */
+ #define  RCC_CFGR_PLLMULL3                  ((uint32_t)0x00040000)        /*!< PLL input clock*3 */
+ #define  RCC_CFGR_PLLMULL4                  ((uint32_t)0x00080000)        /*!< PLL input clock*4 */
+ #define  RCC_CFGR_PLLMULL5                  ((uint32_t)0x000C0000)        /*!< PLL input clock*5 */
+ #define  RCC_CFGR_PLLMULL6                  ((uint32_t)0x00100000)        /*!< PLL input clock*6 */
+ #define  RCC_CFGR_PLLMULL7                  ((uint32_t)0x00140000)        /*!< PLL input clock*7 */
+ #define  RCC_CFGR_PLLMULL8                  ((uint32_t)0x00180000)        /*!< PLL input clock*8 */
+ #define  RCC_CFGR_PLLMULL9                  ((uint32_t)0x001C0000)        /*!< PLL input clock*9 */
+ #define  RCC_CFGR_PLLMULL10                 ((uint32_t)0x00200000)        /*!< PLL input clock10 */
+ #define  RCC_CFGR_PLLMULL11                 ((uint32_t)0x00240000)        /*!< PLL input clock*11 */
+ #define  RCC_CFGR_PLLMULL12                 ((uint32_t)0x00280000)        /*!< PLL input clock*12 */
+ #define  RCC_CFGR_PLLMULL13                 ((uint32_t)0x002C0000)        /*!< PLL input clock*13 */
+ #define  RCC_CFGR_PLLMULL14                 ((uint32_t)0x00300000)        /*!< PLL input clock*14 */
+ #define  RCC_CFGR_PLLMULL15                 ((uint32_t)0x00340000)        /*!< PLL input clock*15 */
+ #define  RCC_CFGR_PLLMULL16                 ((uint32_t)0x00380000)        /*!< PLL input clock*16 */
+ #define  RCC_CFGR_USBPRE                    ((uint32_t)0x00400000)        /*!< USB Device prescaler */
+
+/*!< MCO configuration */
+ #define  RCC_CFGR_MCO                       ((uint32_t)0x07000000)        /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+ #define  RCC_CFGR_MCO_0                     ((uint32_t)0x01000000)        /*!< Bit 0 */
+ #define  RCC_CFGR_MCO_1                     ((uint32_t)0x02000000)        /*!< Bit 1 */
+ #define  RCC_CFGR_MCO_2                     ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+ #define  RCC_CFGR_MCO_NOCLOCK               ((uint32_t)0x00000000)        /*!< No clock */
+ #define  RCC_CFGR_MCO_SYSCLK                ((uint32_t)0x04000000)        /*!< System clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSI                   ((uint32_t)0x05000000)        /*!< HSI clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSE                   ((uint32_t)0x06000000)        /*!< HSE clock selected as MCO source  */
+ #define  RCC_CFGR_MCO_PLL                   ((uint32_t)0x07000000)        /*!< PLL clock divided by 2 selected as MCO source */
+#endif /* STM32F10X_CL */
+
+/*!<******************  Bit definition for RCC_CIR register  ********************/
+#define  RCC_CIR_LSIRDYF                     ((uint32_t)0x00000001)        /*!< LSI Ready Interrupt flag */
+#define  RCC_CIR_LSERDYF                     ((uint32_t)0x00000002)        /*!< LSE Ready Interrupt flag */
+#define  RCC_CIR_HSIRDYF                     ((uint32_t)0x00000004)        /*!< HSI Ready Interrupt flag */
+#define  RCC_CIR_HSERDYF                     ((uint32_t)0x00000008)        /*!< HSE Ready Interrupt flag */
+#define  RCC_CIR_PLLRDYF                     ((uint32_t)0x00000010)        /*!< PLL Ready Interrupt flag */
+#define  RCC_CIR_CSSF                        ((uint32_t)0x00000080)        /*!< Clock Security System Interrupt flag */
+#define  RCC_CIR_LSIRDYIE                    ((uint32_t)0x00000100)        /*!< LSI Ready Interrupt Enable */
+#define  RCC_CIR_LSERDYIE                    ((uint32_t)0x00000200)        /*!< LSE Ready Interrupt Enable */
+#define  RCC_CIR_HSIRDYIE                    ((uint32_t)0x00000400)        /*!< HSI Ready Interrupt Enable */
+#define  RCC_CIR_HSERDYIE                    ((uint32_t)0x00000800)        /*!< HSE Ready Interrupt Enable */
+#define  RCC_CIR_PLLRDYIE                    ((uint32_t)0x00001000)        /*!< PLL Ready Interrupt Enable */
+#define  RCC_CIR_LSIRDYC                     ((uint32_t)0x00010000)        /*!< LSI Ready Interrupt Clear */
+#define  RCC_CIR_LSERDYC                     ((uint32_t)0x00020000)        /*!< LSE Ready Interrupt Clear */
+#define  RCC_CIR_HSIRDYC                     ((uint32_t)0x00040000)        /*!< HSI Ready Interrupt Clear */
+#define  RCC_CIR_HSERDYC                     ((uint32_t)0x00080000)        /*!< HSE Ready Interrupt Clear */
+#define  RCC_CIR_PLLRDYC                     ((uint32_t)0x00100000)        /*!< PLL Ready Interrupt Clear */
+#define  RCC_CIR_CSSC                        ((uint32_t)0x00800000)        /*!< Clock Security System Interrupt Clear */
+
+#ifdef STM32F10X_CL
+ #define  RCC_CIR_PLL2RDYF                    ((uint32_t)0x00000020)        /*!< PLL2 Ready Interrupt flag */
+ #define  RCC_CIR_PLL3RDYF                    ((uint32_t)0x00000040)        /*!< PLL3 Ready Interrupt flag */
+ #define  RCC_CIR_PLL2RDYIE                   ((uint32_t)0x00002000)        /*!< PLL2 Ready Interrupt Enable */
+ #define  RCC_CIR_PLL3RDYIE                   ((uint32_t)0x00004000)        /*!< PLL3 Ready Interrupt Enable */
+ #define  RCC_CIR_PLL2RDYC                    ((uint32_t)0x00200000)        /*!< PLL2 Ready Interrupt Clear */
+ #define  RCC_CIR_PLL3RDYC                    ((uint32_t)0x00400000)        /*!< PLL3 Ready Interrupt Clear */
+#endif /* STM32F10X_CL */
+
+/*****************  Bit definition for RCC_APB2RSTR register  *****************/
+#define  RCC_APB2RSTR_AFIORST                ((uint32_t)0x00000001)        /*!< Alternate Function I/O reset */
+#define  RCC_APB2RSTR_IOPARST                ((uint32_t)0x00000004)        /*!< I/O port A reset */
+#define  RCC_APB2RSTR_IOPBRST                ((uint32_t)0x00000008)        /*!< I/O port B reset */
+#define  RCC_APB2RSTR_IOPCRST                ((uint32_t)0x00000010)        /*!< I/O port C reset */
+#define  RCC_APB2RSTR_IOPDRST                ((uint32_t)0x00000020)        /*!< I/O port D reset */
+#define  RCC_APB2RSTR_ADC1RST                ((uint32_t)0x00000200)        /*!< ADC 1 interface reset */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB2RSTR_ADC2RST                ((uint32_t)0x00000400)        /*!< ADC 2 interface reset */
+#endif
+
+#define  RCC_APB2RSTR_TIM1RST                ((uint32_t)0x00000800)        /*!< TIM1 Timer reset */
+#define  RCC_APB2RSTR_SPI1RST                ((uint32_t)0x00001000)        /*!< SPI 1 reset */
+#define  RCC_APB2RSTR_USART1RST              ((uint32_t)0x00004000)        /*!< USART1 reset */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+#define  RCC_APB2RSTR_TIM15RST               ((uint32_t)0x00010000)        /*!< TIM15 Timer reset */
+#define  RCC_APB2RSTR_TIM16RST               ((uint32_t)0x00020000)        /*!< TIM16 Timer reset */
+#define  RCC_APB2RSTR_TIM17RST               ((uint32_t)0x00040000)        /*!< TIM17 Timer reset */
+#endif
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB2RSTR_IOPERST               ((uint32_t)0x00000040)        /*!< I/O port E reset */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define  RCC_APB2RSTR_IOPFRST               ((uint32_t)0x00000080)        /*!< I/O port F reset */
+ #define  RCC_APB2RSTR_IOPGRST               ((uint32_t)0x00000100)        /*!< I/O port G reset */
+ #define  RCC_APB2RSTR_TIM8RST               ((uint32_t)0x00002000)        /*!< TIM8 Timer reset */
+ #define  RCC_APB2RSTR_ADC3RST               ((uint32_t)0x00008000)        /*!< ADC3 interface reset */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define  RCC_APB2RSTR_IOPFRST               ((uint32_t)0x00000080)        /*!< I/O port F reset */
+ #define  RCC_APB2RSTR_IOPGRST               ((uint32_t)0x00000100)        /*!< I/O port G reset */
+#endif
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB2RSTR_TIM9RST               ((uint32_t)0x00080000)         /*!< TIM9 Timer reset */
+ #define  RCC_APB2RSTR_TIM10RST              ((uint32_t)0x00100000)         /*!< TIM10 Timer reset */
+ #define  RCC_APB2RSTR_TIM11RST              ((uint32_t)0x00200000)         /*!< TIM11 Timer reset */
+#endif /* STM32F10X_XL */
+
+/*****************  Bit definition for RCC_APB1RSTR register  *****************/
+#define  RCC_APB1RSTR_TIM2RST                ((uint32_t)0x00000001)        /*!< Timer 2 reset */
+#define  RCC_APB1RSTR_TIM3RST                ((uint32_t)0x00000002)        /*!< Timer 3 reset */
+#define  RCC_APB1RSTR_WWDGRST                ((uint32_t)0x00000800)        /*!< Window Watchdog reset */
+#define  RCC_APB1RSTR_USART2RST              ((uint32_t)0x00020000)        /*!< USART 2 reset */
+#define  RCC_APB1RSTR_I2C1RST                ((uint32_t)0x00200000)        /*!< I2C 1 reset */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB1RSTR_CAN1RST                ((uint32_t)0x02000000)        /*!< CAN1 reset */
+#endif
+
+#define  RCC_APB1RSTR_BKPRST                 ((uint32_t)0x08000000)        /*!< Backup interface reset */
+#define  RCC_APB1RSTR_PWRRST                 ((uint32_t)0x10000000)        /*!< Power interface reset */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB1RSTR_TIM4RST               ((uint32_t)0x00000004)        /*!< Timer 4 reset */
+ #define  RCC_APB1RSTR_SPI2RST               ((uint32_t)0x00004000)        /*!< SPI 2 reset */
+ #define  RCC_APB1RSTR_USART3RST             ((uint32_t)0x00040000)        /*!< USART 3 reset */
+ #define  RCC_APB1RSTR_I2C2RST               ((uint32_t)0x00400000)        /*!< I2C 2 reset */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined  (STM32F10X_XL)
+ #define  RCC_APB1RSTR_USBRST                ((uint32_t)0x00800000)        /*!< USB Device reset */
+#endif
+
+#if defined (STM32F10X_HD) || defined  (STM32F10X_CL) || defined  (STM32F10X_XL)
+ #define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)        /*!< Timer 5 reset */
+ #define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)        /*!< Timer 6 reset */
+ #define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)        /*!< Timer 7 reset */
+ #define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)        /*!< SPI 3 reset */
+ #define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)        /*!< UART 4 reset */
+ #define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)        /*!< UART 5 reset */
+ #define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)        /*!< DAC interface reset */
+#endif
+
+#if defined (STM32F10X_LD_VL) || defined  (STM32F10X_MD_VL) || defined  (STM32F10X_HD_VL)
+ #define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)        /*!< Timer 6 reset */
+ #define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)        /*!< Timer 7 reset */
+ #define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)        /*!< DAC interface reset */
+ #define  RCC_APB1RSTR_CECRST                 ((uint32_t)0x40000000)        /*!< CEC interface reset */ 
+#endif
+
+#if defined  (STM32F10X_HD_VL)
+ #define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)        /*!< Timer 5 reset */
+ #define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)        /*!< TIM12 Timer reset */
+ #define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)        /*!< TIM13 Timer reset */
+ #define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)        /*!< TIM14 Timer reset */
+ #define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)        /*!< SPI 3 reset */ 
+ #define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)        /*!< UART 4 reset */
+ #define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)        /*!< UART 5 reset */ 
+#endif
+
+#ifdef STM32F10X_CL
+ #define  RCC_APB1RSTR_CAN2RST                ((uint32_t)0x04000000)        /*!< CAN2 reset */
+#endif /* STM32F10X_CL */
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)         /*!< TIM12 Timer reset */
+ #define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)         /*!< TIM13 Timer reset */
+ #define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)         /*!< TIM14 Timer reset */
+#endif /* STM32F10X_XL */
+
+/******************  Bit definition for RCC_AHBENR register  ******************/
+#define  RCC_AHBENR_DMA1EN                   ((uint16_t)0x0001)            /*!< DMA1 clock enable */
+#define  RCC_AHBENR_SRAMEN                   ((uint16_t)0x0004)            /*!< SRAM interface clock enable */
+#define  RCC_AHBENR_FLITFEN                  ((uint16_t)0x0010)            /*!< FLITF clock enable */
+#define  RCC_AHBENR_CRCEN                    ((uint16_t)0x0040)            /*!< CRC clock enable */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL) || defined  (STM32F10X_CL) || defined  (STM32F10X_HD_VL)
+ #define  RCC_AHBENR_DMA2EN                  ((uint16_t)0x0002)            /*!< DMA2 clock enable */
+#endif
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define  RCC_AHBENR_FSMCEN                  ((uint16_t)0x0100)            /*!< FSMC clock enable */
+ #define  RCC_AHBENR_SDIOEN                  ((uint16_t)0x0400)            /*!< SDIO clock enable */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define  RCC_AHBENR_FSMCEN                  ((uint16_t)0x0100)            /*!< FSMC clock enable */
+#endif
+
+#ifdef STM32F10X_CL
+ #define  RCC_AHBENR_OTGFSEN                 ((uint32_t)0x00001000)         /*!< USB OTG FS clock enable */
+ #define  RCC_AHBENR_ETHMACEN                ((uint32_t)0x00004000)         /*!< ETHERNET MAC clock enable */
+ #define  RCC_AHBENR_ETHMACTXEN              ((uint32_t)0x00008000)         /*!< ETHERNET MAC Tx clock enable */
+ #define  RCC_AHBENR_ETHMACRXEN              ((uint32_t)0x00010000)         /*!< ETHERNET MAC Rx clock enable */
+#endif /* STM32F10X_CL */
+
+/******************  Bit definition for RCC_APB2ENR register  *****************/
+#define  RCC_APB2ENR_AFIOEN                  ((uint32_t)0x00000001)         /*!< Alternate Function I/O clock enable */
+#define  RCC_APB2ENR_IOPAEN                  ((uint32_t)0x00000004)         /*!< I/O port A clock enable */
+#define  RCC_APB2ENR_IOPBEN                  ((uint32_t)0x00000008)         /*!< I/O port B clock enable */
+#define  RCC_APB2ENR_IOPCEN                  ((uint32_t)0x00000010)         /*!< I/O port C clock enable */
+#define  RCC_APB2ENR_IOPDEN                  ((uint32_t)0x00000020)         /*!< I/O port D clock enable */
+#define  RCC_APB2ENR_ADC1EN                  ((uint32_t)0x00000200)         /*!< ADC 1 interface clock enable */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB2ENR_ADC2EN                  ((uint32_t)0x00000400)         /*!< ADC 2 interface clock enable */
+#endif
+
+#define  RCC_APB2ENR_TIM1EN                  ((uint32_t)0x00000800)         /*!< TIM1 Timer clock enable */
+#define  RCC_APB2ENR_SPI1EN                  ((uint32_t)0x00001000)         /*!< SPI 1 clock enable */
+#define  RCC_APB2ENR_USART1EN                ((uint32_t)0x00004000)         /*!< USART1 clock enable */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+#define  RCC_APB2ENR_TIM15EN                 ((uint32_t)0x00010000)         /*!< TIM15 Timer clock enable */
+#define  RCC_APB2ENR_TIM16EN                 ((uint32_t)0x00020000)         /*!< TIM16 Timer clock enable */
+#define  RCC_APB2ENR_TIM17EN                 ((uint32_t)0x00040000)         /*!< TIM17 Timer clock enable */
+#endif
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB2ENR_IOPEEN                 ((uint32_t)0x00000040)         /*!< I/O port E clock enable */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define  RCC_APB2ENR_IOPFEN                 ((uint32_t)0x00000080)         /*!< I/O port F clock enable */
+ #define  RCC_APB2ENR_IOPGEN                 ((uint32_t)0x00000100)         /*!< I/O port G clock enable */
+ #define  RCC_APB2ENR_TIM8EN                 ((uint32_t)0x00002000)         /*!< TIM8 Timer clock enable */
+ #define  RCC_APB2ENR_ADC3EN                 ((uint32_t)0x00008000)         /*!< DMA1 clock enable */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define  RCC_APB2ENR_IOPFEN                 ((uint32_t)0x00000080)         /*!< I/O port F clock enable */
+ #define  RCC_APB2ENR_IOPGEN                 ((uint32_t)0x00000100)         /*!< I/O port G clock enable */
+#endif
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB2ENR_TIM9EN                 ((uint32_t)0x00080000)         /*!< TIM9 Timer clock enable  */
+ #define  RCC_APB2ENR_TIM10EN                ((uint32_t)0x00100000)         /*!< TIM10 Timer clock enable  */
+ #define  RCC_APB2ENR_TIM11EN                ((uint32_t)0x00200000)         /*!< TIM11 Timer clock enable */
+#endif
+
+/*****************  Bit definition for RCC_APB1ENR register  ******************/
+#define  RCC_APB1ENR_TIM2EN                  ((uint32_t)0x00000001)        /*!< Timer 2 clock enabled*/
+#define  RCC_APB1ENR_TIM3EN                  ((uint32_t)0x00000002)        /*!< Timer 3 clock enable */
+#define  RCC_APB1ENR_WWDGEN                  ((uint32_t)0x00000800)        /*!< Window Watchdog clock enable */
+#define  RCC_APB1ENR_USART2EN                ((uint32_t)0x00020000)        /*!< USART 2 clock enable */
+#define  RCC_APB1ENR_I2C1EN                  ((uint32_t)0x00200000)        /*!< I2C 1 clock enable */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB1ENR_CAN1EN                  ((uint32_t)0x02000000)        /*!< CAN1 clock enable */
+#endif
+
+#define  RCC_APB1ENR_BKPEN                   ((uint32_t)0x08000000)        /*!< Backup interface clock enable */
+#define  RCC_APB1ENR_PWREN                   ((uint32_t)0x10000000)        /*!< Power interface clock enable */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB1ENR_TIM4EN                 ((uint32_t)0x00000004)        /*!< Timer 4 clock enable */
+ #define  RCC_APB1ENR_SPI2EN                 ((uint32_t)0x00004000)        /*!< SPI 2 clock enable */
+ #define  RCC_APB1ENR_USART3EN               ((uint32_t)0x00040000)        /*!< USART 3 clock enable */
+ #define  RCC_APB1ENR_I2C2EN                 ((uint32_t)0x00400000)        /*!< I2C 2 clock enable */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined  (STM32F10X_LD)
+ #define  RCC_APB1ENR_USBEN                  ((uint32_t)0x00800000)        /*!< USB Device clock enable */
+#endif
+
+#if defined (STM32F10X_HD) || defined  (STM32F10X_CL)
+ #define  RCC_APB1ENR_TIM5EN                 ((uint32_t)0x00000008)        /*!< Timer 5 clock enable */
+ #define  RCC_APB1ENR_TIM6EN                 ((uint32_t)0x00000010)        /*!< Timer 6 clock enable */
+ #define  RCC_APB1ENR_TIM7EN                 ((uint32_t)0x00000020)        /*!< Timer 7 clock enable */
+ #define  RCC_APB1ENR_SPI3EN                 ((uint32_t)0x00008000)        /*!< SPI 3 clock enable */
+ #define  RCC_APB1ENR_UART4EN                ((uint32_t)0x00080000)        /*!< UART 4 clock enable */
+ #define  RCC_APB1ENR_UART5EN                ((uint32_t)0x00100000)        /*!< UART 5 clock enable */
+ #define  RCC_APB1ENR_DACEN                  ((uint32_t)0x20000000)        /*!< DAC interface clock enable */
+#endif
+
+#if defined (STM32F10X_LD_VL) || defined  (STM32F10X_MD_VL) || defined  (STM32F10X_HD_VL)
+ #define  RCC_APB1ENR_TIM6EN                 ((uint32_t)0x00000010)        /*!< Timer 6 clock enable */
+ #define  RCC_APB1ENR_TIM7EN                 ((uint32_t)0x00000020)        /*!< Timer 7 clock enable */
+ #define  RCC_APB1ENR_DACEN                  ((uint32_t)0x20000000)        /*!< DAC interface clock enable */
+ #define  RCC_APB1ENR_CECEN                  ((uint32_t)0x40000000)        /*!< CEC interface clock enable */ 
+#endif
+
+#ifdef STM32F10X_HD_VL
+ #define  RCC_APB1ENR_TIM5EN                 ((uint32_t)0x00000008)        /*!< Timer 5 clock enable */
+ #define  RCC_APB1ENR_TIM12EN                ((uint32_t)0x00000040)         /*!< TIM12 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM13EN                ((uint32_t)0x00000080)         /*!< TIM13 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM14EN                ((uint32_t)0x00000100)         /*!< TIM14 Timer clock enable */
+ #define  RCC_APB1ENR_SPI3EN                 ((uint32_t)0x00008000)        /*!< SPI 3 clock enable */
+ #define  RCC_APB1ENR_UART4EN                ((uint32_t)0x00080000)        /*!< UART 4 clock enable */
+ #define  RCC_APB1ENR_UART5EN                ((uint32_t)0x00100000)        /*!< UART 5 clock enable */ 
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_CL
+ #define  RCC_APB1ENR_CAN2EN                  ((uint32_t)0x04000000)        /*!< CAN2 clock enable */
+#endif /* STM32F10X_CL */
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB1ENR_TIM12EN                ((uint32_t)0x00000040)         /*!< TIM12 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM13EN                ((uint32_t)0x00000080)         /*!< TIM13 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM14EN                ((uint32_t)0x00000100)         /*!< TIM14 Timer clock enable */
+#endif /* STM32F10X_XL */
+
+/*******************  Bit definition for RCC_BDCR register  *******************/
+#define  RCC_BDCR_LSEON                      ((uint32_t)0x00000001)        /*!< External Low Speed oscillator enable */
+#define  RCC_BDCR_LSERDY                     ((uint32_t)0x00000002)        /*!< External Low Speed oscillator Ready */
+#define  RCC_BDCR_LSEBYP                     ((uint32_t)0x00000004)        /*!< External Low Speed oscillator Bypass */
+
+#define  RCC_BDCR_RTCSEL                     ((uint32_t)0x00000300)        /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define  RCC_BDCR_RTCSEL_0                   ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  RCC_BDCR_RTCSEL_1                   ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+/*!< RTC congiguration */
+#define  RCC_BDCR_RTCSEL_NOCLOCK             ((uint32_t)0x00000000)        /*!< No clock */
+#define  RCC_BDCR_RTCSEL_LSE                 ((uint32_t)0x00000100)        /*!< LSE oscillator clock used as RTC clock */
+#define  RCC_BDCR_RTCSEL_LSI                 ((uint32_t)0x00000200)        /*!< LSI oscillator clock used as RTC clock */
+#define  RCC_BDCR_RTCSEL_HSE                 ((uint32_t)0x00000300)        /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define  RCC_BDCR_RTCEN                      ((uint32_t)0x00008000)        /*!< RTC clock enable */
+#define  RCC_BDCR_BDRST                      ((uint32_t)0x00010000)        /*!< Backup domain software reset  */
+
+/*******************  Bit definition for RCC_CSR register  ********************/  
+#define  RCC_CSR_LSION                       ((uint32_t)0x00000001)        /*!< Internal Low Speed oscillator enable */
+#define  RCC_CSR_LSIRDY                      ((uint32_t)0x00000002)        /*!< Internal Low Speed oscillator Ready */
+#define  RCC_CSR_RMVF                        ((uint32_t)0x01000000)        /*!< Remove reset flag */
+#define  RCC_CSR_PINRSTF                     ((uint32_t)0x04000000)        /*!< PIN reset flag */
+#define  RCC_CSR_PORRSTF                     ((uint32_t)0x08000000)        /*!< POR/PDR reset flag */
+#define  RCC_CSR_SFTRSTF                     ((uint32_t)0x10000000)        /*!< Software Reset flag */
+#define  RCC_CSR_IWDGRSTF                    ((uint32_t)0x20000000)        /*!< Independent Watchdog reset flag */
+#define  RCC_CSR_WWDGRSTF                    ((uint32_t)0x40000000)        /*!< Window watchdog reset flag */
+#define  RCC_CSR_LPWRRSTF                    ((uint32_t)0x80000000)        /*!< Low-Power reset flag */
+
+#ifdef STM32F10X_CL
+/*******************  Bit definition for RCC_AHBRSTR register  ****************/
+ #define  RCC_AHBRSTR_OTGFSRST               ((uint32_t)0x00001000)         /*!< USB OTG FS reset */
+ #define  RCC_AHBRSTR_ETHMACRST              ((uint32_t)0x00004000)         /*!< ETHERNET MAC reset */
+
+/*******************  Bit definition for RCC_CFGR2 register  ******************/
+/*!< PREDIV1 configuration */
+ #define  RCC_CFGR2_PREDIV1                  ((uint32_t)0x0000000F)        /*!< PREDIV1[3:0] bits */
+ #define  RCC_CFGR2_PREDIV1_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PREDIV1_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PREDIV1_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PREDIV1_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PREDIV1_DIV1             ((uint32_t)0x00000000)        /*!< PREDIV1 input clock not divided */
+ #define  RCC_CFGR2_PREDIV1_DIV2             ((uint32_t)0x00000001)        /*!< PREDIV1 input clock divided by 2 */
+ #define  RCC_CFGR2_PREDIV1_DIV3             ((uint32_t)0x00000002)        /*!< PREDIV1 input clock divided by 3 */
+ #define  RCC_CFGR2_PREDIV1_DIV4             ((uint32_t)0x00000003)        /*!< PREDIV1 input clock divided by 4 */
+ #define  RCC_CFGR2_PREDIV1_DIV5             ((uint32_t)0x00000004)        /*!< PREDIV1 input clock divided by 5 */
+ #define  RCC_CFGR2_PREDIV1_DIV6             ((uint32_t)0x00000005)        /*!< PREDIV1 input clock divided by 6 */
+ #define  RCC_CFGR2_PREDIV1_DIV7             ((uint32_t)0x00000006)        /*!< PREDIV1 input clock divided by 7 */
+ #define  RCC_CFGR2_PREDIV1_DIV8             ((uint32_t)0x00000007)        /*!< PREDIV1 input clock divided by 8 */
+ #define  RCC_CFGR2_PREDIV1_DIV9             ((uint32_t)0x00000008)        /*!< PREDIV1 input clock divided by 9 */
+ #define  RCC_CFGR2_PREDIV1_DIV10            ((uint32_t)0x00000009)        /*!< PREDIV1 input clock divided by 10 */
+ #define  RCC_CFGR2_PREDIV1_DIV11            ((uint32_t)0x0000000A)        /*!< PREDIV1 input clock divided by 11 */
+ #define  RCC_CFGR2_PREDIV1_DIV12            ((uint32_t)0x0000000B)        /*!< PREDIV1 input clock divided by 12 */
+ #define  RCC_CFGR2_PREDIV1_DIV13            ((uint32_t)0x0000000C)        /*!< PREDIV1 input clock divided by 13 */
+ #define  RCC_CFGR2_PREDIV1_DIV14            ((uint32_t)0x0000000D)        /*!< PREDIV1 input clock divided by 14 */
+ #define  RCC_CFGR2_PREDIV1_DIV15            ((uint32_t)0x0000000E)        /*!< PREDIV1 input clock divided by 15 */
+ #define  RCC_CFGR2_PREDIV1_DIV16            ((uint32_t)0x0000000F)        /*!< PREDIV1 input clock divided by 16 */
+
+/*!< PREDIV2 configuration */
+ #define  RCC_CFGR2_PREDIV2                  ((uint32_t)0x000000F0)        /*!< PREDIV2[3:0] bits */
+ #define  RCC_CFGR2_PREDIV2_0                ((uint32_t)0x00000010)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PREDIV2_1                ((uint32_t)0x00000020)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PREDIV2_2                ((uint32_t)0x00000040)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PREDIV2_3                ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PREDIV2_DIV1             ((uint32_t)0x00000000)        /*!< PREDIV2 input clock not divided */
+ #define  RCC_CFGR2_PREDIV2_DIV2             ((uint32_t)0x00000010)        /*!< PREDIV2 input clock divided by 2 */
+ #define  RCC_CFGR2_PREDIV2_DIV3             ((uint32_t)0x00000020)        /*!< PREDIV2 input clock divided by 3 */
+ #define  RCC_CFGR2_PREDIV2_DIV4             ((uint32_t)0x00000030)        /*!< PREDIV2 input clock divided by 4 */
+ #define  RCC_CFGR2_PREDIV2_DIV5             ((uint32_t)0x00000040)        /*!< PREDIV2 input clock divided by 5 */
+ #define  RCC_CFGR2_PREDIV2_DIV6             ((uint32_t)0x00000050)        /*!< PREDIV2 input clock divided by 6 */
+ #define  RCC_CFGR2_PREDIV2_DIV7             ((uint32_t)0x00000060)        /*!< PREDIV2 input clock divided by 7 */
+ #define  RCC_CFGR2_PREDIV2_DIV8             ((uint32_t)0x00000070)        /*!< PREDIV2 input clock divided by 8 */
+ #define  RCC_CFGR2_PREDIV2_DIV9             ((uint32_t)0x00000080)        /*!< PREDIV2 input clock divided by 9 */
+ #define  RCC_CFGR2_PREDIV2_DIV10            ((uint32_t)0x00000090)        /*!< PREDIV2 input clock divided by 10 */
+ #define  RCC_CFGR2_PREDIV2_DIV11            ((uint32_t)0x000000A0)        /*!< PREDIV2 input clock divided by 11 */
+ #define  RCC_CFGR2_PREDIV2_DIV12            ((uint32_t)0x000000B0)        /*!< PREDIV2 input clock divided by 12 */
+ #define  RCC_CFGR2_PREDIV2_DIV13            ((uint32_t)0x000000C0)        /*!< PREDIV2 input clock divided by 13 */
+ #define  RCC_CFGR2_PREDIV2_DIV14            ((uint32_t)0x000000D0)        /*!< PREDIV2 input clock divided by 14 */
+ #define  RCC_CFGR2_PREDIV2_DIV15            ((uint32_t)0x000000E0)        /*!< PREDIV2 input clock divided by 15 */
+ #define  RCC_CFGR2_PREDIV2_DIV16            ((uint32_t)0x000000F0)        /*!< PREDIV2 input clock divided by 16 */
+
+/*!< PLL2MUL configuration */
+ #define  RCC_CFGR2_PLL2MUL                  ((uint32_t)0x00000F00)        /*!< PLL2MUL[3:0] bits */
+ #define  RCC_CFGR2_PLL2MUL_0                ((uint32_t)0x00000100)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PLL2MUL_1                ((uint32_t)0x00000200)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PLL2MUL_2                ((uint32_t)0x00000400)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PLL2MUL_3                ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PLL2MUL8                 ((uint32_t)0x00000600)        /*!< PLL2 input clock * 8 */
+ #define  RCC_CFGR2_PLL2MUL9                 ((uint32_t)0x00000700)        /*!< PLL2 input clock * 9 */
+ #define  RCC_CFGR2_PLL2MUL10                ((uint32_t)0x00000800)        /*!< PLL2 input clock * 10 */
+ #define  RCC_CFGR2_PLL2MUL11                ((uint32_t)0x00000900)        /*!< PLL2 input clock * 11 */
+ #define  RCC_CFGR2_PLL2MUL12                ((uint32_t)0x00000A00)        /*!< PLL2 input clock * 12 */
+ #define  RCC_CFGR2_PLL2MUL13                ((uint32_t)0x00000B00)        /*!< PLL2 input clock * 13 */
+ #define  RCC_CFGR2_PLL2MUL14                ((uint32_t)0x00000C00)        /*!< PLL2 input clock * 14 */
+ #define  RCC_CFGR2_PLL2MUL16                ((uint32_t)0x00000E00)        /*!< PLL2 input clock * 16 */
+ #define  RCC_CFGR2_PLL2MUL20                ((uint32_t)0x00000F00)        /*!< PLL2 input clock * 20 */
+
+/*!< PLL3MUL configuration */
+ #define  RCC_CFGR2_PLL3MUL                  ((uint32_t)0x0000F000)        /*!< PLL3MUL[3:0] bits */
+ #define  RCC_CFGR2_PLL3MUL_0                ((uint32_t)0x00001000)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PLL3MUL_1                ((uint32_t)0x00002000)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PLL3MUL_2                ((uint32_t)0x00004000)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PLL3MUL_3                ((uint32_t)0x00008000)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PLL3MUL8                 ((uint32_t)0x00006000)        /*!< PLL3 input clock * 8 */
+ #define  RCC_CFGR2_PLL3MUL9                 ((uint32_t)0x00007000)        /*!< PLL3 input clock * 9 */
+ #define  RCC_CFGR2_PLL3MUL10                ((uint32_t)0x00008000)        /*!< PLL3 input clock * 10 */
+ #define  RCC_CFGR2_PLL3MUL11                ((uint32_t)0x00009000)        /*!< PLL3 input clock * 11 */
+ #define  RCC_CFGR2_PLL3MUL12                ((uint32_t)0x0000A000)        /*!< PLL3 input clock * 12 */
+ #define  RCC_CFGR2_PLL3MUL13                ((uint32_t)0x0000B000)        /*!< PLL3 input clock * 13 */
+ #define  RCC_CFGR2_PLL3MUL14                ((uint32_t)0x0000C000)        /*!< PLL3 input clock * 14 */
+ #define  RCC_CFGR2_PLL3MUL16                ((uint32_t)0x0000E000)        /*!< PLL3 input clock * 16 */
+ #define  RCC_CFGR2_PLL3MUL20                ((uint32_t)0x0000F000)        /*!< PLL3 input clock * 20 */
+
+ #define  RCC_CFGR2_PREDIV1SRC               ((uint32_t)0x00010000)        /*!< PREDIV1 entry clock source */
+ #define  RCC_CFGR2_PREDIV1SRC_PLL2          ((uint32_t)0x00010000)        /*!< PLL2 selected as PREDIV1 entry clock source */
+ #define  RCC_CFGR2_PREDIV1SRC_HSE           ((uint32_t)0x00000000)        /*!< HSE selected as PREDIV1 entry clock source */
+ #define  RCC_CFGR2_I2S2SRC                  ((uint32_t)0x00020000)        /*!< I2S2 entry clock source */
+ #define  RCC_CFGR2_I2S3SRC                  ((uint32_t)0x00040000)        /*!< I2S3 clock source */
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/*******************  Bit definition for RCC_CFGR2 register  ******************/
+/*!< PREDIV1 configuration */
+ #define  RCC_CFGR2_PREDIV1                  ((uint32_t)0x0000000F)        /*!< PREDIV1[3:0] bits */
+ #define  RCC_CFGR2_PREDIV1_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PREDIV1_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PREDIV1_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PREDIV1_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PREDIV1_DIV1             ((uint32_t)0x00000000)        /*!< PREDIV1 input clock not divided */
+ #define  RCC_CFGR2_PREDIV1_DIV2             ((uint32_t)0x00000001)        /*!< PREDIV1 input clock divided by 2 */
+ #define  RCC_CFGR2_PREDIV1_DIV3             ((uint32_t)0x00000002)        /*!< PREDIV1 input clock divided by 3 */
+ #define  RCC_CFGR2_PREDIV1_DIV4             ((uint32_t)0x00000003)        /*!< PREDIV1 input clock divided by 4 */
+ #define  RCC_CFGR2_PREDIV1_DIV5             ((uint32_t)0x00000004)        /*!< PREDIV1 input clock divided by 5 */
+ #define  RCC_CFGR2_PREDIV1_DIV6             ((uint32_t)0x00000005)        /*!< PREDIV1 input clock divided by 6 */
+ #define  RCC_CFGR2_PREDIV1_DIV7             ((uint32_t)0x00000006)        /*!< PREDIV1 input clock divided by 7 */
+ #define  RCC_CFGR2_PREDIV1_DIV8             ((uint32_t)0x00000007)        /*!< PREDIV1 input clock divided by 8 */
+ #define  RCC_CFGR2_PREDIV1_DIV9             ((uint32_t)0x00000008)        /*!< PREDIV1 input clock divided by 9 */
+ #define  RCC_CFGR2_PREDIV1_DIV10            ((uint32_t)0x00000009)        /*!< PREDIV1 input clock divided by 10 */
+ #define  RCC_CFGR2_PREDIV1_DIV11            ((uint32_t)0x0000000A)        /*!< PREDIV1 input clock divided by 11 */
+ #define  RCC_CFGR2_PREDIV1_DIV12            ((uint32_t)0x0000000B)        /*!< PREDIV1 input clock divided by 12 */
+ #define  RCC_CFGR2_PREDIV1_DIV13            ((uint32_t)0x0000000C)        /*!< PREDIV1 input clock divided by 13 */
+ #define  RCC_CFGR2_PREDIV1_DIV14            ((uint32_t)0x0000000D)        /*!< PREDIV1 input clock divided by 14 */
+ #define  RCC_CFGR2_PREDIV1_DIV15            ((uint32_t)0x0000000E)        /*!< PREDIV1 input clock divided by 15 */
+ #define  RCC_CFGR2_PREDIV1_DIV16            ((uint32_t)0x0000000F)        /*!< PREDIV1 input clock divided by 16 */
+#endif
+ 
+/******************************************************************************/
+/*                                                                            */
+/*                General Purpose and Alternate Function I/O                  */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for GPIO_CRL register  *******************/
+#define  GPIO_CRL_MODE                       ((uint32_t)0x33333333)        /*!< Port x mode bits */
+
+#define  GPIO_CRL_MODE0                      ((uint32_t)0x00000003)        /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */
+#define  GPIO_CRL_MODE0_0                    ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE0_1                    ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE1                      ((uint32_t)0x00000030)        /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */
+#define  GPIO_CRL_MODE1_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE1_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE2                      ((uint32_t)0x00000300)        /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */
+#define  GPIO_CRL_MODE2_0                    ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE2_1                    ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE3                      ((uint32_t)0x00003000)        /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */
+#define  GPIO_CRL_MODE3_0                    ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE3_1                    ((uint32_t)0x00002000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE4                      ((uint32_t)0x00030000)        /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */
+#define  GPIO_CRL_MODE4_0                    ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE4_1                    ((uint32_t)0x00020000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE5                      ((uint32_t)0x00300000)        /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */
+#define  GPIO_CRL_MODE5_0                    ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE5_1                    ((uint32_t)0x00200000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE6                      ((uint32_t)0x03000000)        /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */
+#define  GPIO_CRL_MODE6_0                    ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE6_1                    ((uint32_t)0x02000000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE7                      ((uint32_t)0x30000000)        /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */
+#define  GPIO_CRL_MODE7_0                    ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE7_1                    ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF                        ((uint32_t)0xCCCCCCCC)        /*!< Port x configuration bits */
+
+#define  GPIO_CRL_CNF0                       ((uint32_t)0x0000000C)        /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */
+#define  GPIO_CRL_CNF0_0                     ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF0_1                     ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF1                       ((uint32_t)0x000000C0)        /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */
+#define  GPIO_CRL_CNF1_0                     ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF1_1                     ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF2                       ((uint32_t)0x00000C00)        /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */
+#define  GPIO_CRL_CNF2_0                     ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF2_1                     ((uint32_t)0x00000800)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF3                       ((uint32_t)0x0000C000)        /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */
+#define  GPIO_CRL_CNF3_0                     ((uint32_t)0x00004000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF3_1                     ((uint32_t)0x00008000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF4                       ((uint32_t)0x000C0000)        /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */
+#define  GPIO_CRL_CNF4_0                     ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF4_1                     ((uint32_t)0x00080000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF5                       ((uint32_t)0x00C00000)        /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */
+#define  GPIO_CRL_CNF5_0                     ((uint32_t)0x00400000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF5_1                     ((uint32_t)0x00800000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF6                       ((uint32_t)0x0C000000)        /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */
+#define  GPIO_CRL_CNF6_0                     ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF6_1                     ((uint32_t)0x08000000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF7                       ((uint32_t)0xC0000000)        /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */
+#define  GPIO_CRL_CNF7_0                     ((uint32_t)0x40000000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF7_1                     ((uint32_t)0x80000000)        /*!< Bit 1 */
+
+/*******************  Bit definition for GPIO_CRH register  *******************/
+#define  GPIO_CRH_MODE                       ((uint32_t)0x33333333)        /*!< Port x mode bits */
+
+#define  GPIO_CRH_MODE8                      ((uint32_t)0x00000003)        /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */
+#define  GPIO_CRH_MODE8_0                    ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE8_1                    ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE9                      ((uint32_t)0x00000030)        /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */
+#define  GPIO_CRH_MODE9_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE9_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE10                     ((uint32_t)0x00000300)        /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */
+#define  GPIO_CRH_MODE10_0                   ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE10_1                   ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE11                     ((uint32_t)0x00003000)        /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */
+#define  GPIO_CRH_MODE11_0                   ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE11_1                   ((uint32_t)0x00002000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE12                     ((uint32_t)0x00030000)        /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */
+#define  GPIO_CRH_MODE12_0                   ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE12_1                   ((uint32_t)0x00020000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE13                     ((uint32_t)0x00300000)        /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */
+#define  GPIO_CRH_MODE13_0                   ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE13_1                   ((uint32_t)0x00200000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE14                     ((uint32_t)0x03000000)        /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */
+#define  GPIO_CRH_MODE14_0                   ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE14_1                   ((uint32_t)0x02000000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE15                     ((uint32_t)0x30000000)        /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */
+#define  GPIO_CRH_MODE15_0                   ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE15_1                   ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF                        ((uint32_t)0xCCCCCCCC)        /*!< Port x configuration bits */
+
+#define  GPIO_CRH_CNF8                       ((uint32_t)0x0000000C)        /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */
+#define  GPIO_CRH_CNF8_0                     ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF8_1                     ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF9                       ((uint32_t)0x000000C0)        /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */
+#define  GPIO_CRH_CNF9_0                     ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF9_1                     ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF10                      ((uint32_t)0x00000C00)        /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */
+#define  GPIO_CRH_CNF10_0                    ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF10_1                    ((uint32_t)0x00000800)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF11                      ((uint32_t)0x0000C000)        /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */
+#define  GPIO_CRH_CNF11_0                    ((uint32_t)0x00004000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF11_1                    ((uint32_t)0x00008000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF12                      ((uint32_t)0x000C0000)        /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */
+#define  GPIO_CRH_CNF12_0                    ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF12_1                    ((uint32_t)0x00080000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF13                      ((uint32_t)0x00C00000)        /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */
+#define  GPIO_CRH_CNF13_0                    ((uint32_t)0x00400000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF13_1                    ((uint32_t)0x00800000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF14                      ((uint32_t)0x0C000000)        /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */
+#define  GPIO_CRH_CNF14_0                    ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF14_1                    ((uint32_t)0x08000000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF15                      ((uint32_t)0xC0000000)        /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */
+#define  GPIO_CRH_CNF15_0                    ((uint32_t)0x40000000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF15_1                    ((uint32_t)0x80000000)        /*!< Bit 1 */
+
+/*!<******************  Bit definition for GPIO_IDR register  *******************/
+#define GPIO_IDR_IDR0                        ((uint16_t)0x0001)            /*!< Port input data, bit 0 */
+#define GPIO_IDR_IDR1                        ((uint16_t)0x0002)            /*!< Port input data, bit 1 */
+#define GPIO_IDR_IDR2                        ((uint16_t)0x0004)            /*!< Port input data, bit 2 */
+#define GPIO_IDR_IDR3                        ((uint16_t)0x0008)            /*!< Port input data, bit 3 */
+#define GPIO_IDR_IDR4                        ((uint16_t)0x0010)            /*!< Port input data, bit 4 */
+#define GPIO_IDR_IDR5                        ((uint16_t)0x0020)            /*!< Port input data, bit 5 */
+#define GPIO_IDR_IDR6                        ((uint16_t)0x0040)            /*!< Port input data, bit 6 */
+#define GPIO_IDR_IDR7                        ((uint16_t)0x0080)            /*!< Port input data, bit 7 */
+#define GPIO_IDR_IDR8                        ((uint16_t)0x0100)            /*!< Port input data, bit 8 */
+#define GPIO_IDR_IDR9                        ((uint16_t)0x0200)            /*!< Port input data, bit 9 */
+#define GPIO_IDR_IDR10                       ((uint16_t)0x0400)            /*!< Port input data, bit 10 */
+#define GPIO_IDR_IDR11                       ((uint16_t)0x0800)            /*!< Port input data, bit 11 */
+#define GPIO_IDR_IDR12                       ((uint16_t)0x1000)            /*!< Port input data, bit 12 */
+#define GPIO_IDR_IDR13                       ((uint16_t)0x2000)            /*!< Port input data, bit 13 */
+#define GPIO_IDR_IDR14                       ((uint16_t)0x4000)            /*!< Port input data, bit 14 */
+#define GPIO_IDR_IDR15                       ((uint16_t)0x8000)            /*!< Port input data, bit 15 */
+
+/*******************  Bit definition for GPIO_ODR register  *******************/
+#define GPIO_ODR_ODR0                        ((uint16_t)0x0001)            /*!< Port output data, bit 0 */
+#define GPIO_ODR_ODR1                        ((uint16_t)0x0002)            /*!< Port output data, bit 1 */
+#define GPIO_ODR_ODR2                        ((uint16_t)0x0004)            /*!< Port output data, bit 2 */
+#define GPIO_ODR_ODR3                        ((uint16_t)0x0008)            /*!< Port output data, bit 3 */
+#define GPIO_ODR_ODR4                        ((uint16_t)0x0010)            /*!< Port output data, bit 4 */
+#define GPIO_ODR_ODR5                        ((uint16_t)0x0020)            /*!< Port output data, bit 5 */
+#define GPIO_ODR_ODR6                        ((uint16_t)0x0040)            /*!< Port output data, bit 6 */
+#define GPIO_ODR_ODR7                        ((uint16_t)0x0080)            /*!< Port output data, bit 7 */
+#define GPIO_ODR_ODR8                        ((uint16_t)0x0100)            /*!< Port output data, bit 8 */
+#define GPIO_ODR_ODR9                        ((uint16_t)0x0200)            /*!< Port output data, bit 9 */
+#define GPIO_ODR_ODR10                       ((uint16_t)0x0400)            /*!< Port output data, bit 10 */
+#define GPIO_ODR_ODR11                       ((uint16_t)0x0800)            /*!< Port output data, bit 11 */
+#define GPIO_ODR_ODR12                       ((uint16_t)0x1000)            /*!< Port output data, bit 12 */
+#define GPIO_ODR_ODR13                       ((uint16_t)0x2000)            /*!< Port output data, bit 13 */
+#define GPIO_ODR_ODR14                       ((uint16_t)0x4000)            /*!< Port output data, bit 14 */
+#define GPIO_ODR_ODR15                       ((uint16_t)0x8000)            /*!< Port output data, bit 15 */
+
+/******************  Bit definition for GPIO_BSRR register  *******************/
+#define GPIO_BSRR_BS0                        ((uint32_t)0x00000001)        /*!< Port x Set bit 0 */
+#define GPIO_BSRR_BS1                        ((uint32_t)0x00000002)        /*!< Port x Set bit 1 */
+#define GPIO_BSRR_BS2                        ((uint32_t)0x00000004)        /*!< Port x Set bit 2 */
+#define GPIO_BSRR_BS3                        ((uint32_t)0x00000008)        /*!< Port x Set bit 3 */
+#define GPIO_BSRR_BS4                        ((uint32_t)0x00000010)        /*!< Port x Set bit 4 */
+#define GPIO_BSRR_BS5                        ((uint32_t)0x00000020)        /*!< Port x Set bit 5 */
+#define GPIO_BSRR_BS6                        ((uint32_t)0x00000040)        /*!< Port x Set bit 6 */
+#define GPIO_BSRR_BS7                        ((uint32_t)0x00000080)        /*!< Port x Set bit 7 */
+#define GPIO_BSRR_BS8                        ((uint32_t)0x00000100)        /*!< Port x Set bit 8 */
+#define GPIO_BSRR_BS9                        ((uint32_t)0x00000200)        /*!< Port x Set bit 9 */
+#define GPIO_BSRR_BS10                       ((uint32_t)0x00000400)        /*!< Port x Set bit 10 */
+#define GPIO_BSRR_BS11                       ((uint32_t)0x00000800)        /*!< Port x Set bit 11 */
+#define GPIO_BSRR_BS12                       ((uint32_t)0x00001000)        /*!< Port x Set bit 12 */
+#define GPIO_BSRR_BS13                       ((uint32_t)0x00002000)        /*!< Port x Set bit 13 */
+#define GPIO_BSRR_BS14                       ((uint32_t)0x00004000)        /*!< Port x Set bit 14 */
+#define GPIO_BSRR_BS15                       ((uint32_t)0x00008000)        /*!< Port x Set bit 15 */
+
+#define GPIO_BSRR_BR0                        ((uint32_t)0x00010000)        /*!< Port x Reset bit 0 */
+#define GPIO_BSRR_BR1                        ((uint32_t)0x00020000)        /*!< Port x Reset bit 1 */
+#define GPIO_BSRR_BR2                        ((uint32_t)0x00040000)        /*!< Port x Reset bit 2 */
+#define GPIO_BSRR_BR3                        ((uint32_t)0x00080000)        /*!< Port x Reset bit 3 */
+#define GPIO_BSRR_BR4                        ((uint32_t)0x00100000)        /*!< Port x Reset bit 4 */
+#define GPIO_BSRR_BR5                        ((uint32_t)0x00200000)        /*!< Port x Reset bit 5 */
+#define GPIO_BSRR_BR6                        ((uint32_t)0x00400000)        /*!< Port x Reset bit 6 */
+#define GPIO_BSRR_BR7                        ((uint32_t)0x00800000)        /*!< Port x Reset bit 7 */
+#define GPIO_BSRR_BR8                        ((uint32_t)0x01000000)        /*!< Port x Reset bit 8 */
+#define GPIO_BSRR_BR9                        ((uint32_t)0x02000000)        /*!< Port x Reset bit 9 */
+#define GPIO_BSRR_BR10                       ((uint32_t)0x04000000)        /*!< Port x Reset bit 10 */
+#define GPIO_BSRR_BR11                       ((uint32_t)0x08000000)        /*!< Port x Reset bit 11 */
+#define GPIO_BSRR_BR12                       ((uint32_t)0x10000000)        /*!< Port x Reset bit 12 */
+#define GPIO_BSRR_BR13                       ((uint32_t)0x20000000)        /*!< Port x Reset bit 13 */
+#define GPIO_BSRR_BR14                       ((uint32_t)0x40000000)        /*!< Port x Reset bit 14 */
+#define GPIO_BSRR_BR15                       ((uint32_t)0x80000000)        /*!< Port x Reset bit 15 */
+
+/*******************  Bit definition for GPIO_BRR register  *******************/
+#define GPIO_BRR_BR0                         ((uint16_t)0x0001)            /*!< Port x Reset bit 0 */
+#define GPIO_BRR_BR1                         ((uint16_t)0x0002)            /*!< Port x Reset bit 1 */
+#define GPIO_BRR_BR2                         ((uint16_t)0x0004)            /*!< Port x Reset bit 2 */
+#define GPIO_BRR_BR3                         ((uint16_t)0x0008)            /*!< Port x Reset bit 3 */
+#define GPIO_BRR_BR4                         ((uint16_t)0x0010)            /*!< Port x Reset bit 4 */
+#define GPIO_BRR_BR5                         ((uint16_t)0x0020)            /*!< Port x Reset bit 5 */
+#define GPIO_BRR_BR6                         ((uint16_t)0x0040)            /*!< Port x Reset bit 6 */
+#define GPIO_BRR_BR7                         ((uint16_t)0x0080)            /*!< Port x Reset bit 7 */
+#define GPIO_BRR_BR8                         ((uint16_t)0x0100)            /*!< Port x Reset bit 8 */
+#define GPIO_BRR_BR9                         ((uint16_t)0x0200)            /*!< Port x Reset bit 9 */
+#define GPIO_BRR_BR10                        ((uint16_t)0x0400)            /*!< Port x Reset bit 10 */
+#define GPIO_BRR_BR11                        ((uint16_t)0x0800)            /*!< Port x Reset bit 11 */
+#define GPIO_BRR_BR12                        ((uint16_t)0x1000)            /*!< Port x Reset bit 12 */
+#define GPIO_BRR_BR13                        ((uint16_t)0x2000)            /*!< Port x Reset bit 13 */
+#define GPIO_BRR_BR14                        ((uint16_t)0x4000)            /*!< Port x Reset bit 14 */
+#define GPIO_BRR_BR15                        ((uint16_t)0x8000)            /*!< Port x Reset bit 15 */
+
+/******************  Bit definition for GPIO_LCKR register  *******************/
+#define GPIO_LCKR_LCK0                       ((uint32_t)0x00000001)        /*!< Port x Lock bit 0 */
+#define GPIO_LCKR_LCK1                       ((uint32_t)0x00000002)        /*!< Port x Lock bit 1 */
+#define GPIO_LCKR_LCK2                       ((uint32_t)0x00000004)        /*!< Port x Lock bit 2 */
+#define GPIO_LCKR_LCK3                       ((uint32_t)0x00000008)        /*!< Port x Lock bit 3 */
+#define GPIO_LCKR_LCK4                       ((uint32_t)0x00000010)        /*!< Port x Lock bit 4 */
+#define GPIO_LCKR_LCK5                       ((uint32_t)0x00000020)        /*!< Port x Lock bit 5 */
+#define GPIO_LCKR_LCK6                       ((uint32_t)0x00000040)        /*!< Port x Lock bit 6 */
+#define GPIO_LCKR_LCK7                       ((uint32_t)0x00000080)        /*!< Port x Lock bit 7 */
+#define GPIO_LCKR_LCK8                       ((uint32_t)0x00000100)        /*!< Port x Lock bit 8 */
+#define GPIO_LCKR_LCK9                       ((uint32_t)0x00000200)        /*!< Port x Lock bit 9 */
+#define GPIO_LCKR_LCK10                      ((uint32_t)0x00000400)        /*!< Port x Lock bit 10 */
+#define GPIO_LCKR_LCK11                      ((uint32_t)0x00000800)        /*!< Port x Lock bit 11 */
+#define GPIO_LCKR_LCK12                      ((uint32_t)0x00001000)        /*!< Port x Lock bit 12 */
+#define GPIO_LCKR_LCK13                      ((uint32_t)0x00002000)        /*!< Port x Lock bit 13 */
+#define GPIO_LCKR_LCK14                      ((uint32_t)0x00004000)        /*!< Port x Lock bit 14 */
+#define GPIO_LCKR_LCK15                      ((uint32_t)0x00008000)        /*!< Port x Lock bit 15 */
+#define GPIO_LCKR_LCKK                       ((uint32_t)0x00010000)        /*!< Lock key */
+
+/*----------------------------------------------------------------------------*/
+
+/******************  Bit definition for AFIO_EVCR register  *******************/
+#define AFIO_EVCR_PIN                        ((uint8_t)0x0F)               /*!< PIN[3:0] bits (Pin selection) */
+#define AFIO_EVCR_PIN_0                      ((uint8_t)0x01)               /*!< Bit 0 */
+#define AFIO_EVCR_PIN_1                      ((uint8_t)0x02)               /*!< Bit 1 */
+#define AFIO_EVCR_PIN_2                      ((uint8_t)0x04)               /*!< Bit 2 */
+#define AFIO_EVCR_PIN_3                      ((uint8_t)0x08)               /*!< Bit 3 */
+
+/*!< PIN configuration */
+#define AFIO_EVCR_PIN_PX0                    ((uint8_t)0x00)               /*!< Pin 0 selected */
+#define AFIO_EVCR_PIN_PX1                    ((uint8_t)0x01)               /*!< Pin 1 selected */
+#define AFIO_EVCR_PIN_PX2                    ((uint8_t)0x02)               /*!< Pin 2 selected */
+#define AFIO_EVCR_PIN_PX3                    ((uint8_t)0x03)               /*!< Pin 3 selected */
+#define AFIO_EVCR_PIN_PX4                    ((uint8_t)0x04)               /*!< Pin 4 selected */
+#define AFIO_EVCR_PIN_PX5                    ((uint8_t)0x05)               /*!< Pin 5 selected */
+#define AFIO_EVCR_PIN_PX6                    ((uint8_t)0x06)               /*!< Pin 6 selected */
+#define AFIO_EVCR_PIN_PX7                    ((uint8_t)0x07)               /*!< Pin 7 selected */
+#define AFIO_EVCR_PIN_PX8                    ((uint8_t)0x08)               /*!< Pin 8 selected */
+#define AFIO_EVCR_PIN_PX9                    ((uint8_t)0x09)               /*!< Pin 9 selected */
+#define AFIO_EVCR_PIN_PX10                   ((uint8_t)0x0A)               /*!< Pin 10 selected */
+#define AFIO_EVCR_PIN_PX11                   ((uint8_t)0x0B)               /*!< Pin 11 selected */
+#define AFIO_EVCR_PIN_PX12                   ((uint8_t)0x0C)               /*!< Pin 12 selected */
+#define AFIO_EVCR_PIN_PX13                   ((uint8_t)0x0D)               /*!< Pin 13 selected */
+#define AFIO_EVCR_PIN_PX14                   ((uint8_t)0x0E)               /*!< Pin 14 selected */
+#define AFIO_EVCR_PIN_PX15                   ((uint8_t)0x0F)               /*!< Pin 15 selected */
+
+#define AFIO_EVCR_PORT                       ((uint8_t)0x70)               /*!< PORT[2:0] bits (Port selection) */
+#define AFIO_EVCR_PORT_0                     ((uint8_t)0x10)               /*!< Bit 0 */
+#define AFIO_EVCR_PORT_1                     ((uint8_t)0x20)               /*!< Bit 1 */
+#define AFIO_EVCR_PORT_2                     ((uint8_t)0x40)               /*!< Bit 2 */
+
+/*!< PORT configuration */
+#define AFIO_EVCR_PORT_PA                    ((uint8_t)0x00)               /*!< Port A selected */
+#define AFIO_EVCR_PORT_PB                    ((uint8_t)0x10)               /*!< Port B selected */
+#define AFIO_EVCR_PORT_PC                    ((uint8_t)0x20)               /*!< Port C selected */
+#define AFIO_EVCR_PORT_PD                    ((uint8_t)0x30)               /*!< Port D selected */
+#define AFIO_EVCR_PORT_PE                    ((uint8_t)0x40)               /*!< Port E selected */
+
+#define AFIO_EVCR_EVOE                       ((uint8_t)0x80)               /*!< Event Output Enable */
+
+/******************  Bit definition for AFIO_MAPR register  *******************/
+#define AFIO_MAPR_SPI1_REMAP                 ((uint32_t)0x00000001)        /*!< SPI1 remapping */
+#define AFIO_MAPR_I2C1_REMAP                 ((uint32_t)0x00000002)        /*!< I2C1 remapping */
+#define AFIO_MAPR_USART1_REMAP               ((uint32_t)0x00000004)        /*!< USART1 remapping */
+#define AFIO_MAPR_USART2_REMAP               ((uint32_t)0x00000008)        /*!< USART2 remapping */
+
+#define AFIO_MAPR_USART3_REMAP               ((uint32_t)0x00000030)        /*!< USART3_REMAP[1:0] bits (USART3 remapping) */
+#define AFIO_MAPR_USART3_REMAP_0             ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define AFIO_MAPR_USART3_REMAP_1             ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+/* USART3_REMAP configuration */
+#define AFIO_MAPR_USART3_REMAP_NOREMAP       ((uint32_t)0x00000000)        /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */
+#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP  ((uint32_t)0x00000010)        /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */
+#define AFIO_MAPR_USART3_REMAP_FULLREMAP     ((uint32_t)0x00000030)        /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */
+
+#define AFIO_MAPR_TIM1_REMAP                 ((uint32_t)0x000000C0)        /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */
+#define AFIO_MAPR_TIM1_REMAP_0               ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define AFIO_MAPR_TIM1_REMAP_1               ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+/*!< TIM1_REMAP configuration */
+#define AFIO_MAPR_TIM1_REMAP_NOREMAP         ((uint32_t)0x00000000)        /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */
+#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP    ((uint32_t)0x00000040)        /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */
+#define AFIO_MAPR_TIM1_REMAP_FULLREMAP       ((uint32_t)0x000000C0)        /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */
+
+#define AFIO_MAPR_TIM2_REMAP                 ((uint32_t)0x00000300)        /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */
+#define AFIO_MAPR_TIM2_REMAP_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define AFIO_MAPR_TIM2_REMAP_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+/*!< TIM2_REMAP configuration */
+#define AFIO_MAPR_TIM2_REMAP_NOREMAP         ((uint32_t)0x00000000)        /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */
+#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1   ((uint32_t)0x00000100)        /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */
+#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2   ((uint32_t)0x00000200)        /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */
+#define AFIO_MAPR_TIM2_REMAP_FULLREMAP       ((uint32_t)0x00000300)        /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */
+
+#define AFIO_MAPR_TIM3_REMAP                 ((uint32_t)0x00000C00)        /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */
+#define AFIO_MAPR_TIM3_REMAP_0               ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define AFIO_MAPR_TIM3_REMAP_1               ((uint32_t)0x00000800)        /*!< Bit 1 */
+
+/*!< TIM3_REMAP configuration */
+#define AFIO_MAPR_TIM3_REMAP_NOREMAP         ((uint32_t)0x00000000)        /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */
+#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP    ((uint32_t)0x00000800)        /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */
+#define AFIO_MAPR_TIM3_REMAP_FULLREMAP       ((uint32_t)0x00000C00)        /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */
+
+#define AFIO_MAPR_TIM4_REMAP                 ((uint32_t)0x00001000)        /*!< TIM4_REMAP bit (TIM4 remapping) */
+
+#define AFIO_MAPR_CAN_REMAP                  ((uint32_t)0x00006000)        /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */
+#define AFIO_MAPR_CAN_REMAP_0                ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define AFIO_MAPR_CAN_REMAP_1                ((uint32_t)0x00004000)        /*!< Bit 1 */
+
+/*!< CAN_REMAP configuration */
+#define AFIO_MAPR_CAN_REMAP_REMAP1           ((uint32_t)0x00000000)        /*!< CANRX mapped to PA11, CANTX mapped to PA12 */
+#define AFIO_MAPR_CAN_REMAP_REMAP2           ((uint32_t)0x00004000)        /*!< CANRX mapped to PB8, CANTX mapped to PB9 */
+#define AFIO_MAPR_CAN_REMAP_REMAP3           ((uint32_t)0x00006000)        /*!< CANRX mapped to PD0, CANTX mapped to PD1 */
+
+#define AFIO_MAPR_PD01_REMAP                 ((uint32_t)0x00008000)        /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */
+#define AFIO_MAPR_TIM5CH4_IREMAP             ((uint32_t)0x00010000)        /*!< TIM5 Channel4 Internal Remap */
+#define AFIO_MAPR_ADC1_ETRGINJ_REMAP         ((uint32_t)0x00020000)        /*!< ADC 1 External Trigger Injected Conversion remapping */
+#define AFIO_MAPR_ADC1_ETRGREG_REMAP         ((uint32_t)0x00040000)        /*!< ADC 1 External Trigger Regular Conversion remapping */
+#define AFIO_MAPR_ADC2_ETRGINJ_REMAP         ((uint32_t)0x00080000)        /*!< ADC 2 External Trigger Injected Conversion remapping */
+#define AFIO_MAPR_ADC2_ETRGREG_REMAP         ((uint32_t)0x00100000)        /*!< ADC 2 External Trigger Regular Conversion remapping */
+
+/*!< SWJ_CFG configuration */
+#define AFIO_MAPR_SWJ_CFG                    ((uint32_t)0x07000000)        /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */
+#define AFIO_MAPR_SWJ_CFG_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define AFIO_MAPR_SWJ_CFG_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define AFIO_MAPR_SWJ_CFG_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+#define AFIO_MAPR_SWJ_CFG_RESET              ((uint32_t)0x00000000)        /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */
+#define AFIO_MAPR_SWJ_CFG_NOJNTRST           ((uint32_t)0x01000000)        /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */
+#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE        ((uint32_t)0x02000000)        /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define AFIO_MAPR_SWJ_CFG_DISABLE            ((uint32_t)0x04000000)        /*!< JTAG-DP Disabled and SW-DP Disabled */
+
+#ifdef STM32F10X_CL
+/*!< ETH_REMAP configuration */
+ #define AFIO_MAPR_ETH_REMAP                  ((uint32_t)0x00200000)        /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */
+
+/*!< CAN2_REMAP configuration */
+ #define AFIO_MAPR_CAN2_REMAP                 ((uint32_t)0x00400000)        /*!< CAN2_REMAP bit (CAN2 I/O remapping) */
+
+/*!< MII_RMII_SEL configuration */
+ #define AFIO_MAPR_MII_RMII_SEL               ((uint32_t)0x00800000)        /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */
+
+/*!< SPI3_REMAP configuration */
+ #define AFIO_MAPR_SPI3_REMAP                 ((uint32_t)0x10000000)        /*!< SPI3_REMAP bit (SPI3 remapping) */
+
+/*!< TIM2ITR1_IREMAP configuration */
+ #define AFIO_MAPR_TIM2ITR1_IREMAP            ((uint32_t)0x20000000)        /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */
+
+/*!< PTP_PPS_REMAP configuration */
+ #define AFIO_MAPR_PTP_PPS_REMAP              ((uint32_t)0x40000000)        /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */
+#endif
+
+/*****************  Bit definition for AFIO_EXTICR1 register  *****************/
+#define AFIO_EXTICR1_EXTI0                   ((uint16_t)0x000F)            /*!< EXTI 0 configuration */
+#define AFIO_EXTICR1_EXTI1                   ((uint16_t)0x00F0)            /*!< EXTI 1 configuration */
+#define AFIO_EXTICR1_EXTI2                   ((uint16_t)0x0F00)            /*!< EXTI 2 configuration */
+#define AFIO_EXTICR1_EXTI3                   ((uint16_t)0xF000)            /*!< EXTI 3 configuration */
+
+/*!< EXTI0 configuration */
+#define AFIO_EXTICR1_EXTI0_PA                ((uint16_t)0x0000)            /*!< PA[0] pin */
+#define AFIO_EXTICR1_EXTI0_PB                ((uint16_t)0x0001)            /*!< PB[0] pin */
+#define AFIO_EXTICR1_EXTI0_PC                ((uint16_t)0x0002)            /*!< PC[0] pin */
+#define AFIO_EXTICR1_EXTI0_PD                ((uint16_t)0x0003)            /*!< PD[0] pin */
+#define AFIO_EXTICR1_EXTI0_PE                ((uint16_t)0x0004)            /*!< PE[0] pin */
+#define AFIO_EXTICR1_EXTI0_PF                ((uint16_t)0x0005)            /*!< PF[0] pin */
+#define AFIO_EXTICR1_EXTI0_PG                ((uint16_t)0x0006)            /*!< PG[0] pin */
+
+/*!< EXTI1 configuration */
+#define AFIO_EXTICR1_EXTI1_PA                ((uint16_t)0x0000)            /*!< PA[1] pin */
+#define AFIO_EXTICR1_EXTI1_PB                ((uint16_t)0x0010)            /*!< PB[1] pin */
+#define AFIO_EXTICR1_EXTI1_PC                ((uint16_t)0x0020)            /*!< PC[1] pin */
+#define AFIO_EXTICR1_EXTI1_PD                ((uint16_t)0x0030)            /*!< PD[1] pin */
+#define AFIO_EXTICR1_EXTI1_PE                ((uint16_t)0x0040)            /*!< PE[1] pin */
+#define AFIO_EXTICR1_EXTI1_PF                ((uint16_t)0x0050)            /*!< PF[1] pin */
+#define AFIO_EXTICR1_EXTI1_PG                ((uint16_t)0x0060)            /*!< PG[1] pin */
+
+/*!< EXTI2 configuration */  
+#define AFIO_EXTICR1_EXTI2_PA                ((uint16_t)0x0000)            /*!< PA[2] pin */
+#define AFIO_EXTICR1_EXTI2_PB                ((uint16_t)0x0100)            /*!< PB[2] pin */
+#define AFIO_EXTICR1_EXTI2_PC                ((uint16_t)0x0200)            /*!< PC[2] pin */
+#define AFIO_EXTICR1_EXTI2_PD                ((uint16_t)0x0300)            /*!< PD[2] pin */
+#define AFIO_EXTICR1_EXTI2_PE                ((uint16_t)0x0400)            /*!< PE[2] pin */
+#define AFIO_EXTICR1_EXTI2_PF                ((uint16_t)0x0500)            /*!< PF[2] pin */
+#define AFIO_EXTICR1_EXTI2_PG                ((uint16_t)0x0600)            /*!< PG[2] pin */
+
+/*!< EXTI3 configuration */
+#define AFIO_EXTICR1_EXTI3_PA                ((uint16_t)0x0000)            /*!< PA[3] pin */
+#define AFIO_EXTICR1_EXTI3_PB                ((uint16_t)0x1000)            /*!< PB[3] pin */
+#define AFIO_EXTICR1_EXTI3_PC                ((uint16_t)0x2000)            /*!< PC[3] pin */
+#define AFIO_EXTICR1_EXTI3_PD                ((uint16_t)0x3000)            /*!< PD[3] pin */
+#define AFIO_EXTICR1_EXTI3_PE                ((uint16_t)0x4000)            /*!< PE[3] pin */
+#define AFIO_EXTICR1_EXTI3_PF                ((uint16_t)0x5000)            /*!< PF[3] pin */
+#define AFIO_EXTICR1_EXTI3_PG                ((uint16_t)0x6000)            /*!< PG[3] pin */
+
+/*****************  Bit definition for AFIO_EXTICR2 register  *****************/
+#define AFIO_EXTICR2_EXTI4                   ((uint16_t)0x000F)            /*!< EXTI 4 configuration */
+#define AFIO_EXTICR2_EXTI5                   ((uint16_t)0x00F0)            /*!< EXTI 5 configuration */
+#define AFIO_EXTICR2_EXTI6                   ((uint16_t)0x0F00)            /*!< EXTI 6 configuration */
+#define AFIO_EXTICR2_EXTI7                   ((uint16_t)0xF000)            /*!< EXTI 7 configuration */
+
+/*!< EXTI4 configuration */
+#define AFIO_EXTICR2_EXTI4_PA                ((uint16_t)0x0000)            /*!< PA[4] pin */
+#define AFIO_EXTICR2_EXTI4_PB                ((uint16_t)0x0001)            /*!< PB[4] pin */
+#define AFIO_EXTICR2_EXTI4_PC                ((uint16_t)0x0002)            /*!< PC[4] pin */
+#define AFIO_EXTICR2_EXTI4_PD                ((uint16_t)0x0003)            /*!< PD[4] pin */
+#define AFIO_EXTICR2_EXTI4_PE                ((uint16_t)0x0004)            /*!< PE[4] pin */
+#define AFIO_EXTICR2_EXTI4_PF                ((uint16_t)0x0005)            /*!< PF[4] pin */
+#define AFIO_EXTICR2_EXTI4_PG                ((uint16_t)0x0006)            /*!< PG[4] pin */
+
+/* EXTI5 configuration */
+#define AFIO_EXTICR2_EXTI5_PA                ((uint16_t)0x0000)            /*!< PA[5] pin */
+#define AFIO_EXTICR2_EXTI5_PB                ((uint16_t)0x0010)            /*!< PB[5] pin */
+#define AFIO_EXTICR2_EXTI5_PC                ((uint16_t)0x0020)            /*!< PC[5] pin */
+#define AFIO_EXTICR2_EXTI5_PD                ((uint16_t)0x0030)            /*!< PD[5] pin */
+#define AFIO_EXTICR2_EXTI5_PE                ((uint16_t)0x0040)            /*!< PE[5] pin */
+#define AFIO_EXTICR2_EXTI5_PF                ((uint16_t)0x0050)            /*!< PF[5] pin */
+#define AFIO_EXTICR2_EXTI5_PG                ((uint16_t)0x0060)            /*!< PG[5] pin */
+
+/*!< EXTI6 configuration */  
+#define AFIO_EXTICR2_EXTI6_PA                ((uint16_t)0x0000)            /*!< PA[6] pin */
+#define AFIO_EXTICR2_EXTI6_PB                ((uint16_t)0x0100)            /*!< PB[6] pin */
+#define AFIO_EXTICR2_EXTI6_PC                ((uint16_t)0x0200)            /*!< PC[6] pin */
+#define AFIO_EXTICR2_EXTI6_PD                ((uint16_t)0x0300)            /*!< PD[6] pin */
+#define AFIO_EXTICR2_EXTI6_PE                ((uint16_t)0x0400)            /*!< PE[6] pin */
+#define AFIO_EXTICR2_EXTI6_PF                ((uint16_t)0x0500)            /*!< PF[6] pin */
+#define AFIO_EXTICR2_EXTI6_PG                ((uint16_t)0x0600)            /*!< PG[6] pin */
+
+/*!< EXTI7 configuration */
+#define AFIO_EXTICR2_EXTI7_PA                ((uint16_t)0x0000)            /*!< PA[7] pin */
+#define AFIO_EXTICR2_EXTI7_PB                ((uint16_t)0x1000)            /*!< PB[7] pin */
+#define AFIO_EXTICR2_EXTI7_PC                ((uint16_t)0x2000)            /*!< PC[7] pin */
+#define AFIO_EXTICR2_EXTI7_PD                ((uint16_t)0x3000)            /*!< PD[7] pin */
+#define AFIO_EXTICR2_EXTI7_PE                ((uint16_t)0x4000)            /*!< PE[7] pin */
+#define AFIO_EXTICR2_EXTI7_PF                ((uint16_t)0x5000)            /*!< PF[7] pin */
+#define AFIO_EXTICR2_EXTI7_PG                ((uint16_t)0x6000)            /*!< PG[7] pin */
+
+/*****************  Bit definition for AFIO_EXTICR3 register  *****************/
+#define AFIO_EXTICR3_EXTI8                   ((uint16_t)0x000F)            /*!< EXTI 8 configuration */
+#define AFIO_EXTICR3_EXTI9                   ((uint16_t)0x00F0)            /*!< EXTI 9 configuration */
+#define AFIO_EXTICR3_EXTI10                  ((uint16_t)0x0F00)            /*!< EXTI 10 configuration */
+#define AFIO_EXTICR3_EXTI11                  ((uint16_t)0xF000)            /*!< EXTI 11 configuration */
+
+/*!< EXTI8 configuration */
+#define AFIO_EXTICR3_EXTI8_PA                ((uint16_t)0x0000)            /*!< PA[8] pin */
+#define AFIO_EXTICR3_EXTI8_PB                ((uint16_t)0x0001)            /*!< PB[8] pin */
+#define AFIO_EXTICR3_EXTI8_PC                ((uint16_t)0x0002)            /*!< PC[8] pin */
+#define AFIO_EXTICR3_EXTI8_PD                ((uint16_t)0x0003)            /*!< PD[8] pin */
+#define AFIO_EXTICR3_EXTI8_PE                ((uint16_t)0x0004)            /*!< PE[8] pin */
+#define AFIO_EXTICR3_EXTI8_PF                ((uint16_t)0x0005)            /*!< PF[8] pin */
+#define AFIO_EXTICR3_EXTI8_PG                ((uint16_t)0x0006)            /*!< PG[8] pin */
+
+/*!< EXTI9 configuration */
+#define AFIO_EXTICR3_EXTI9_PA                ((uint16_t)0x0000)            /*!< PA[9] pin */
+#define AFIO_EXTICR3_EXTI9_PB                ((uint16_t)0x0010)            /*!< PB[9] pin */
+#define AFIO_EXTICR3_EXTI9_PC                ((uint16_t)0x0020)            /*!< PC[9] pin */
+#define AFIO_EXTICR3_EXTI9_PD                ((uint16_t)0x0030)            /*!< PD[9] pin */
+#define AFIO_EXTICR3_EXTI9_PE                ((uint16_t)0x0040)            /*!< PE[9] pin */
+#define AFIO_EXTICR3_EXTI9_PF                ((uint16_t)0x0050)            /*!< PF[9] pin */
+#define AFIO_EXTICR3_EXTI9_PG                ((uint16_t)0x0060)            /*!< PG[9] pin */
+
+/*!< EXTI10 configuration */  
+#define AFIO_EXTICR3_EXTI10_PA               ((uint16_t)0x0000)            /*!< PA[10] pin */
+#define AFIO_EXTICR3_EXTI10_PB               ((uint16_t)0x0100)            /*!< PB[10] pin */
+#define AFIO_EXTICR3_EXTI10_PC               ((uint16_t)0x0200)            /*!< PC[10] pin */
+#define AFIO_EXTICR3_EXTI10_PD               ((uint16_t)0x0300)            /*!< PD[10] pin */
+#define AFIO_EXTICR3_EXTI10_PE               ((uint16_t)0x0400)            /*!< PE[10] pin */
+#define AFIO_EXTICR3_EXTI10_PF               ((uint16_t)0x0500)            /*!< PF[10] pin */
+#define AFIO_EXTICR3_EXTI10_PG               ((uint16_t)0x0600)            /*!< PG[10] pin */
+
+/*!< EXTI11 configuration */
+#define AFIO_EXTICR3_EXTI11_PA               ((uint16_t)0x0000)            /*!< PA[11] pin */
+#define AFIO_EXTICR3_EXTI11_PB               ((uint16_t)0x1000)            /*!< PB[11] pin */
+#define AFIO_EXTICR3_EXTI11_PC               ((uint16_t)0x2000)            /*!< PC[11] pin */
+#define AFIO_EXTICR3_EXTI11_PD               ((uint16_t)0x3000)            /*!< PD[11] pin */
+#define AFIO_EXTICR3_EXTI11_PE               ((uint16_t)0x4000)            /*!< PE[11] pin */
+#define AFIO_EXTICR3_EXTI11_PF               ((uint16_t)0x5000)            /*!< PF[11] pin */
+#define AFIO_EXTICR3_EXTI11_PG               ((uint16_t)0x6000)            /*!< PG[11] pin */
+
+/*****************  Bit definition for AFIO_EXTICR4 register  *****************/
+#define AFIO_EXTICR4_EXTI12                  ((uint16_t)0x000F)            /*!< EXTI 12 configuration */
+#define AFIO_EXTICR4_EXTI13                  ((uint16_t)0x00F0)            /*!< EXTI 13 configuration */
+#define AFIO_EXTICR4_EXTI14                  ((uint16_t)0x0F00)            /*!< EXTI 14 configuration */
+#define AFIO_EXTICR4_EXTI15                  ((uint16_t)0xF000)            /*!< EXTI 15 configuration */
+
+/* EXTI12 configuration */
+#define AFIO_EXTICR4_EXTI12_PA               ((uint16_t)0x0000)            /*!< PA[12] pin */
+#define AFIO_EXTICR4_EXTI12_PB               ((uint16_t)0x0001)            /*!< PB[12] pin */
+#define AFIO_EXTICR4_EXTI12_PC               ((uint16_t)0x0002)            /*!< PC[12] pin */
+#define AFIO_EXTICR4_EXTI12_PD               ((uint16_t)0x0003)            /*!< PD[12] pin */
+#define AFIO_EXTICR4_EXTI12_PE               ((uint16_t)0x0004)            /*!< PE[12] pin */
+#define AFIO_EXTICR4_EXTI12_PF               ((uint16_t)0x0005)            /*!< PF[12] pin */
+#define AFIO_EXTICR4_EXTI12_PG               ((uint16_t)0x0006)            /*!< PG[12] pin */
+
+/* EXTI13 configuration */
+#define AFIO_EXTICR4_EXTI13_PA               ((uint16_t)0x0000)            /*!< PA[13] pin */
+#define AFIO_EXTICR4_EXTI13_PB               ((uint16_t)0x0010)            /*!< PB[13] pin */
+#define AFIO_EXTICR4_EXTI13_PC               ((uint16_t)0x0020)            /*!< PC[13] pin */
+#define AFIO_EXTICR4_EXTI13_PD               ((uint16_t)0x0030)            /*!< PD[13] pin */
+#define AFIO_EXTICR4_EXTI13_PE               ((uint16_t)0x0040)            /*!< PE[13] pin */
+#define AFIO_EXTICR4_EXTI13_PF               ((uint16_t)0x0050)            /*!< PF[13] pin */
+#define AFIO_EXTICR4_EXTI13_PG               ((uint16_t)0x0060)            /*!< PG[13] pin */
+
+/*!< EXTI14 configuration */  
+#define AFIO_EXTICR4_EXTI14_PA               ((uint16_t)0x0000)            /*!< PA[14] pin */
+#define AFIO_EXTICR4_EXTI14_PB               ((uint16_t)0x0100)            /*!< PB[14] pin */
+#define AFIO_EXTICR4_EXTI14_PC               ((uint16_t)0x0200)            /*!< PC[14] pin */
+#define AFIO_EXTICR4_EXTI14_PD               ((uint16_t)0x0300)            /*!< PD[14] pin */
+#define AFIO_EXTICR4_EXTI14_PE               ((uint16_t)0x0400)            /*!< PE[14] pin */
+#define AFIO_EXTICR4_EXTI14_PF               ((uint16_t)0x0500)            /*!< PF[14] pin */
+#define AFIO_EXTICR4_EXTI14_PG               ((uint16_t)0x0600)            /*!< PG[14] pin */
+
+/*!< EXTI15 configuration */
+#define AFIO_EXTICR4_EXTI15_PA               ((uint16_t)0x0000)            /*!< PA[15] pin */
+#define AFIO_EXTICR4_EXTI15_PB               ((uint16_t)0x1000)            /*!< PB[15] pin */
+#define AFIO_EXTICR4_EXTI15_PC               ((uint16_t)0x2000)            /*!< PC[15] pin */
+#define AFIO_EXTICR4_EXTI15_PD               ((uint16_t)0x3000)            /*!< PD[15] pin */
+#define AFIO_EXTICR4_EXTI15_PE               ((uint16_t)0x4000)            /*!< PE[15] pin */
+#define AFIO_EXTICR4_EXTI15_PF               ((uint16_t)0x5000)            /*!< PF[15] pin */
+#define AFIO_EXTICR4_EXTI15_PG               ((uint16_t)0x6000)            /*!< PG[15] pin */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/******************  Bit definition for AFIO_MAPR2 register  ******************/
+#define AFIO_MAPR2_TIM15_REMAP               ((uint32_t)0x00000001)        /*!< TIM15 remapping */
+#define AFIO_MAPR2_TIM16_REMAP               ((uint32_t)0x00000002)        /*!< TIM16 remapping */
+#define AFIO_MAPR2_TIM17_REMAP               ((uint32_t)0x00000004)        /*!< TIM17 remapping */
+#define AFIO_MAPR2_CEC_REMAP                 ((uint32_t)0x00000008)        /*!< CEC remapping */
+#define AFIO_MAPR2_TIM1_DMA_REMAP            ((uint32_t)0x00000010)        /*!< TIM1_DMA remapping */
+#endif
+
+#ifdef STM32F10X_HD_VL
+#define AFIO_MAPR2_TIM13_REMAP               ((uint32_t)0x00000100)        /*!< TIM13 remapping */
+#define AFIO_MAPR2_TIM14_REMAP               ((uint32_t)0x00000200)        /*!< TIM14 remapping */
+#define AFIO_MAPR2_FSMC_NADV_REMAP           ((uint32_t)0x00000400)        /*!< FSMC NADV remapping */
+#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP       ((uint32_t)0x00000800)        /*!< TIM6/TIM7 and DAC DMA remapping */
+#define AFIO_MAPR2_TIM12_REMAP               ((uint32_t)0x00001000)        /*!< TIM12 remapping */
+#define AFIO_MAPR2_MISC_REMAP                ((uint32_t)0x00002000)        /*!< Miscellaneous remapping */
+#endif
+
+#ifdef STM32F10X_XL 
+/******************  Bit definition for AFIO_MAPR2 register  ******************/
+#define AFIO_MAPR2_TIM9_REMAP                ((uint32_t)0x00000020)        /*!< TIM9 remapping */
+#define AFIO_MAPR2_TIM10_REMAP               ((uint32_t)0x00000040)        /*!< TIM10 remapping */
+#define AFIO_MAPR2_TIM11_REMAP               ((uint32_t)0x00000080)        /*!< TIM11 remapping */
+#define AFIO_MAPR2_TIM13_REMAP               ((uint32_t)0x00000100)        /*!< TIM13 remapping */
+#define AFIO_MAPR2_TIM14_REMAP               ((uint32_t)0x00000200)        /*!< TIM14 remapping */
+#define AFIO_MAPR2_FSMC_NADV_REMAP           ((uint32_t)0x00000400)        /*!< FSMC NADV remapping */
+#endif
+
+/******************************************************************************/
+/*                                                                            */
+/*                               SystemTick                                   */
+/*                                                                            */
+/******************************************************************************/
+
+/*****************  Bit definition for SysTick_CTRL register  *****************/
+#define  SysTick_CTRL_ENABLE                 ((uint32_t)0x00000001)        /*!< Counter enable */
+#define  SysTick_CTRL_TICKINT                ((uint32_t)0x00000002)        /*!< Counting down to 0 pends the SysTick handler */
+#define  SysTick_CTRL_CLKSOURCE              ((uint32_t)0x00000004)        /*!< Clock source */
+#define  SysTick_CTRL_COUNTFLAG              ((uint32_t)0x00010000)        /*!< Count Flag */
+
+/*****************  Bit definition for SysTick_LOAD register  *****************/
+#define  SysTick_LOAD_RELOAD                 ((uint32_t)0x00FFFFFF)        /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */
+
+/*****************  Bit definition for SysTick_VAL register  ******************/
+#define  SysTick_VAL_CURRENT                 ((uint32_t)0x00FFFFFF)        /*!< Current value at the time the register is accessed */
+
+/*****************  Bit definition for SysTick_CALIB register  ****************/
+#define  SysTick_CALIB_TENMS                 ((uint32_t)0x00FFFFFF)        /*!< Reload value to use for 10ms timing */
+#define  SysTick_CALIB_SKEW                  ((uint32_t)0x40000000)        /*!< Calibration value is not exactly 10 ms */
+#define  SysTick_CALIB_NOREF                 ((uint32_t)0x80000000)        /*!< The reference clock is not provided */
+
+/******************************************************************************/
+/*                                                                            */
+/*                  Nested Vectored Interrupt Controller                      */
+/*                                                                            */
+/******************************************************************************/
+
+/******************  Bit definition for NVIC_ISER register  *******************/
+#define  NVIC_ISER_SETENA                    ((uint32_t)0xFFFFFFFF)        /*!< Interrupt set enable bits */
+#define  NVIC_ISER_SETENA_0                  ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ISER_SETENA_1                  ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ISER_SETENA_2                  ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ISER_SETENA_3                  ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ISER_SETENA_4                  ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ISER_SETENA_5                  ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ISER_SETENA_6                  ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ISER_SETENA_7                  ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ISER_SETENA_8                  ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ISER_SETENA_9                  ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ISER_SETENA_10                 ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ISER_SETENA_11                 ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ISER_SETENA_12                 ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ISER_SETENA_13                 ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ISER_SETENA_14                 ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ISER_SETENA_15                 ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ISER_SETENA_16                 ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ISER_SETENA_17                 ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ISER_SETENA_18                 ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ISER_SETENA_19                 ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ISER_SETENA_20                 ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ISER_SETENA_21                 ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ISER_SETENA_22                 ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ISER_SETENA_23                 ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ISER_SETENA_24                 ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ISER_SETENA_25                 ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ISER_SETENA_26                 ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ISER_SETENA_27                 ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ISER_SETENA_28                 ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ISER_SETENA_29                 ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ISER_SETENA_30                 ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ISER_SETENA_31                 ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_ICER register  *******************/
+#define  NVIC_ICER_CLRENA                   ((uint32_t)0xFFFFFFFF)        /*!< Interrupt clear-enable bits */
+#define  NVIC_ICER_CLRENA_0                  ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ICER_CLRENA_1                  ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ICER_CLRENA_2                  ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ICER_CLRENA_3                  ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ICER_CLRENA_4                  ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ICER_CLRENA_5                  ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ICER_CLRENA_6                  ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ICER_CLRENA_7                  ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ICER_CLRENA_8                  ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ICER_CLRENA_9                  ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ICER_CLRENA_10                 ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ICER_CLRENA_11                 ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ICER_CLRENA_12                 ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ICER_CLRENA_13                 ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ICER_CLRENA_14                 ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ICER_CLRENA_15                 ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ICER_CLRENA_16                 ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ICER_CLRENA_17                 ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ICER_CLRENA_18                 ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ICER_CLRENA_19                 ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ICER_CLRENA_20                 ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ICER_CLRENA_21                 ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ICER_CLRENA_22                 ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ICER_CLRENA_23                 ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ICER_CLRENA_24                 ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ICER_CLRENA_25                 ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ICER_CLRENA_26                 ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ICER_CLRENA_27                 ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ICER_CLRENA_28                 ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ICER_CLRENA_29                 ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ICER_CLRENA_30                 ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ICER_CLRENA_31                 ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_ISPR register  *******************/
+#define  NVIC_ISPR_SETPEND                   ((uint32_t)0xFFFFFFFF)        /*!< Interrupt set-pending bits */
+#define  NVIC_ISPR_SETPEND_0                 ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ISPR_SETPEND_1                 ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ISPR_SETPEND_2                 ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ISPR_SETPEND_3                 ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ISPR_SETPEND_4                 ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ISPR_SETPEND_5                 ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ISPR_SETPEND_6                 ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ISPR_SETPEND_7                 ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ISPR_SETPEND_8                 ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ISPR_SETPEND_9                 ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ISPR_SETPEND_10                ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ISPR_SETPEND_11                ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ISPR_SETPEND_12                ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ISPR_SETPEND_13                ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ISPR_SETPEND_14                ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ISPR_SETPEND_15                ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ISPR_SETPEND_16                ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ISPR_SETPEND_17                ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ISPR_SETPEND_18                ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ISPR_SETPEND_19                ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ISPR_SETPEND_20                ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ISPR_SETPEND_21                ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ISPR_SETPEND_22                ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ISPR_SETPEND_23                ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ISPR_SETPEND_24                ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ISPR_SETPEND_25                ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ISPR_SETPEND_26                ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ISPR_SETPEND_27                ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ISPR_SETPEND_28                ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ISPR_SETPEND_29                ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ISPR_SETPEND_30                ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ISPR_SETPEND_31                ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_ICPR register  *******************/
+#define  NVIC_ICPR_CLRPEND                   ((uint32_t)0xFFFFFFFF)        /*!< Interrupt clear-pending bits */
+#define  NVIC_ICPR_CLRPEND_0                 ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ICPR_CLRPEND_1                 ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ICPR_CLRPEND_2                 ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ICPR_CLRPEND_3                 ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ICPR_CLRPEND_4                 ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ICPR_CLRPEND_5                 ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ICPR_CLRPEND_6                 ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ICPR_CLRPEND_7                 ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ICPR_CLRPEND_8                 ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ICPR_CLRPEND_9                 ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ICPR_CLRPEND_10                ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ICPR_CLRPEND_11                ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ICPR_CLRPEND_12                ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ICPR_CLRPEND_13                ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ICPR_CLRPEND_14                ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ICPR_CLRPEND_15                ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ICPR_CLRPEND_16                ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ICPR_CLRPEND_17                ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ICPR_CLRPEND_18                ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ICPR_CLRPEND_19                ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ICPR_CLRPEND_20                ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ICPR_CLRPEND_21                ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ICPR_CLRPEND_22                ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ICPR_CLRPEND_23                ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ICPR_CLRPEND_24                ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ICPR_CLRPEND_25                ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ICPR_CLRPEND_26                ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ICPR_CLRPEND_27                ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ICPR_CLRPEND_28                ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ICPR_CLRPEND_29                ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ICPR_CLRPEND_30                ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ICPR_CLRPEND_31                ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_IABR register  *******************/
+#define  NVIC_IABR_ACTIVE                    ((uint32_t)0xFFFFFFFF)        /*!< Interrupt active flags */
+#define  NVIC_IABR_ACTIVE_0                  ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_IABR_ACTIVE_1                  ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_IABR_ACTIVE_2                  ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_IABR_ACTIVE_3                  ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_IABR_ACTIVE_4                  ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_IABR_ACTIVE_5                  ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_IABR_ACTIVE_6                  ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_IABR_ACTIVE_7                  ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_IABR_ACTIVE_8                  ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_IABR_ACTIVE_9                  ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_IABR_ACTIVE_10                 ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_IABR_ACTIVE_11                 ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_IABR_ACTIVE_12                 ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_IABR_ACTIVE_13                 ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_IABR_ACTIVE_14                 ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_IABR_ACTIVE_15                 ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_IABR_ACTIVE_16                 ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_IABR_ACTIVE_17                 ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_IABR_ACTIVE_18                 ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_IABR_ACTIVE_19                 ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_IABR_ACTIVE_20                 ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_IABR_ACTIVE_21                 ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_IABR_ACTIVE_22                 ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_IABR_ACTIVE_23                 ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_IABR_ACTIVE_24                 ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_IABR_ACTIVE_25                 ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_IABR_ACTIVE_26                 ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_IABR_ACTIVE_27                 ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_IABR_ACTIVE_28                 ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_IABR_ACTIVE_29                 ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_IABR_ACTIVE_30                 ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_IABR_ACTIVE_31                 ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_PRI0 register  *******************/
+#define  NVIC_IPR0_PRI_0                     ((uint32_t)0x000000FF)        /*!< Priority of interrupt 0 */
+#define  NVIC_IPR0_PRI_1                     ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 1 */
+#define  NVIC_IPR0_PRI_2                     ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 2 */
+#define  NVIC_IPR0_PRI_3                     ((uint32_t)0xFF000000)        /*!< Priority of interrupt 3 */
+
+/******************  Bit definition for NVIC_PRI1 register  *******************/
+#define  NVIC_IPR1_PRI_4                     ((uint32_t)0x000000FF)        /*!< Priority of interrupt 4 */
+#define  NVIC_IPR1_PRI_5                     ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 5 */
+#define  NVIC_IPR1_PRI_6                     ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 6 */
+#define  NVIC_IPR1_PRI_7                     ((uint32_t)0xFF000000)        /*!< Priority of interrupt 7 */
+
+/******************  Bit definition for NVIC_PRI2 register  *******************/
+#define  NVIC_IPR2_PRI_8                     ((uint32_t)0x000000FF)        /*!< Priority of interrupt 8 */
+#define  NVIC_IPR2_PRI_9                     ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 9 */
+#define  NVIC_IPR2_PRI_10                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 10 */
+#define  NVIC_IPR2_PRI_11                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 11 */
+
+/******************  Bit definition for NVIC_PRI3 register  *******************/
+#define  NVIC_IPR3_PRI_12                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 12 */
+#define  NVIC_IPR3_PRI_13                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 13 */
+#define  NVIC_IPR3_PRI_14                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 14 */
+#define  NVIC_IPR3_PRI_15                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 15 */
+
+/******************  Bit definition for NVIC_PRI4 register  *******************/
+#define  NVIC_IPR4_PRI_16                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 16 */
+#define  NVIC_IPR4_PRI_17                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 17 */
+#define  NVIC_IPR4_PRI_18                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 18 */
+#define  NVIC_IPR4_PRI_19                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 19 */
+
+/******************  Bit definition for NVIC_PRI5 register  *******************/
+#define  NVIC_IPR5_PRI_20                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 20 */
+#define  NVIC_IPR5_PRI_21                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 21 */
+#define  NVIC_IPR5_PRI_22                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 22 */
+#define  NVIC_IPR5_PRI_23                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 23 */
+
+/******************  Bit definition for NVIC_PRI6 register  *******************/
+#define  NVIC_IPR6_PRI_24                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 24 */
+#define  NVIC_IPR6_PRI_25                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 25 */
+#define  NVIC_IPR6_PRI_26                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 26 */
+#define  NVIC_IPR6_PRI_27                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 27 */
+
+/******************  Bit definition for NVIC_PRI7 register  *******************/
+#define  NVIC_IPR7_PRI_28                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 28 */
+#define  NVIC_IPR7_PRI_29                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 29 */
+#define  NVIC_IPR7_PRI_30                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 30 */
+#define  NVIC_IPR7_PRI_31                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 31 */
+
+/******************  Bit definition for SCB_CPUID register  *******************/
+#define  SCB_CPUID_REVISION                  ((uint32_t)0x0000000F)        /*!< Implementation defined revision number */
+#define  SCB_CPUID_PARTNO                    ((uint32_t)0x0000FFF0)        /*!< Number of processor within family */
+#define  SCB_CPUID_Constant                  ((uint32_t)0x000F0000)        /*!< Reads as 0x0F */
+#define  SCB_CPUID_VARIANT                   ((uint32_t)0x00F00000)        /*!< Implementation defined variant number */
+#define  SCB_CPUID_IMPLEMENTER               ((uint32_t)0xFF000000)        /*!< Implementer code. ARM is 0x41 */
+
+/*******************  Bit definition for SCB_ICSR register  *******************/
+#define  SCB_ICSR_VECTACTIVE                 ((uint32_t)0x000001FF)        /*!< Active ISR number field */
+#define  SCB_ICSR_RETTOBASE                  ((uint32_t)0x00000800)        /*!< All active exceptions minus the IPSR_current_exception yields the empty set */
+#define  SCB_ICSR_VECTPENDING                ((uint32_t)0x003FF000)        /*!< Pending ISR number field */
+#define  SCB_ICSR_ISRPENDING                 ((uint32_t)0x00400000)        /*!< Interrupt pending flag */
+#define  SCB_ICSR_ISRPREEMPT                 ((uint32_t)0x00800000)        /*!< It indicates that a pending interrupt becomes active in the next running cycle */
+#define  SCB_ICSR_PENDSTCLR                  ((uint32_t)0x02000000)        /*!< Clear pending SysTick bit */
+#define  SCB_ICSR_PENDSTSET                  ((uint32_t)0x04000000)        /*!< Set pending SysTick bit */
+#define  SCB_ICSR_PENDSVCLR                  ((uint32_t)0x08000000)        /*!< Clear pending pendSV bit */
+#define  SCB_ICSR_PENDSVSET                  ((uint32_t)0x10000000)        /*!< Set pending pendSV bit */
+#define  SCB_ICSR_NMIPENDSET                 ((uint32_t)0x80000000)        /*!< Set pending NMI bit */
+
+/*******************  Bit definition for SCB_VTOR register  *******************/
+#define  SCB_VTOR_TBLOFF                     ((uint32_t)0x1FFFFF80)        /*!< Vector table base offset field */
+#define  SCB_VTOR_TBLBASE                    ((uint32_t)0x20000000)        /*!< Table base in code(0) or RAM(1) */
+
+/*!<*****************  Bit definition for SCB_AIRCR register  *******************/
+#define  SCB_AIRCR_VECTRESET                 ((uint32_t)0x00000001)        /*!< System Reset bit */
+#define  SCB_AIRCR_VECTCLRACTIVE             ((uint32_t)0x00000002)        /*!< Clear active vector bit */
+#define  SCB_AIRCR_SYSRESETREQ               ((uint32_t)0x00000004)        /*!< Requests chip control logic to generate a reset */
+
+#define  SCB_AIRCR_PRIGROUP                  ((uint32_t)0x00000700)        /*!< PRIGROUP[2:0] bits (Priority group) */
+#define  SCB_AIRCR_PRIGROUP_0                ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  SCB_AIRCR_PRIGROUP_1                ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  SCB_AIRCR_PRIGROUP_2                ((uint32_t)0x00000400)        /*!< Bit 2  */
+
+/* prority group configuration */
+#define  SCB_AIRCR_PRIGROUP0                 ((uint32_t)0x00000000)        /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */
+#define  SCB_AIRCR_PRIGROUP1                 ((uint32_t)0x00000100)        /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP2                 ((uint32_t)0x00000200)        /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP3                 ((uint32_t)0x00000300)        /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP4                 ((uint32_t)0x00000400)        /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP5                 ((uint32_t)0x00000500)        /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP6                 ((uint32_t)0x00000600)        /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP7                 ((uint32_t)0x00000700)        /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */
+
+#define  SCB_AIRCR_ENDIANESS                 ((uint32_t)0x00008000)        /*!< Data endianness bit */
+#define  SCB_AIRCR_VECTKEY                   ((uint32_t)0xFFFF0000)        /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */
+
+/*******************  Bit definition for SCB_SCR register  ********************/
+#define  SCB_SCR_SLEEPONEXIT                 ((uint8_t)0x02)               /*!< Sleep on exit bit */
+#define  SCB_SCR_SLEEPDEEP                   ((uint8_t)0x04)               /*!< Sleep deep bit */
+#define  SCB_SCR_SEVONPEND                   ((uint8_t)0x10)               /*!< Wake up from WFE */
+
+/********************  Bit definition for SCB_CCR register  *******************/
+#define  SCB_CCR_NONBASETHRDENA              ((uint16_t)0x0001)            /*!< Thread mode can be entered from any level in Handler mode by controlled return value */
+#define  SCB_CCR_USERSETMPEND                ((uint16_t)0x0002)            /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */
+#define  SCB_CCR_UNALIGN_TRP                 ((uint16_t)0x0008)            /*!< Trap for unaligned access */
+#define  SCB_CCR_DIV_0_TRP                   ((uint16_t)0x0010)            /*!< Trap on Divide by 0 */
+#define  SCB_CCR_BFHFNMIGN                   ((uint16_t)0x0100)            /*!< Handlers running at priority -1 and -2 */
+#define  SCB_CCR_STKALIGN                    ((uint16_t)0x0200)            /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */
+
+/*******************  Bit definition for SCB_SHPR register ********************/
+#define  SCB_SHPR_PRI_N                      ((uint32_t)0x000000FF)        /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */
+#define  SCB_SHPR_PRI_N1                     ((uint32_t)0x0000FF00)        /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */
+#define  SCB_SHPR_PRI_N2                     ((uint32_t)0x00FF0000)        /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */
+#define  SCB_SHPR_PRI_N3                     ((uint32_t)0xFF000000)        /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */
+
+/******************  Bit definition for SCB_SHCSR register  *******************/
+#define  SCB_SHCSR_MEMFAULTACT               ((uint32_t)0x00000001)        /*!< MemManage is active */
+#define  SCB_SHCSR_BUSFAULTACT               ((uint32_t)0x00000002)        /*!< BusFault is active */
+#define  SCB_SHCSR_USGFAULTACT               ((uint32_t)0x00000008)        /*!< UsageFault is active */
+#define  SCB_SHCSR_SVCALLACT                 ((uint32_t)0x00000080)        /*!< SVCall is active */
+#define  SCB_SHCSR_MONITORACT                ((uint32_t)0x00000100)        /*!< Monitor is active */
+#define  SCB_SHCSR_PENDSVACT                 ((uint32_t)0x00000400)        /*!< PendSV is active */
+#define  SCB_SHCSR_SYSTICKACT                ((uint32_t)0x00000800)        /*!< SysTick is active */
+#define  SCB_SHCSR_USGFAULTPENDED            ((uint32_t)0x00001000)        /*!< Usage Fault is pended */
+#define  SCB_SHCSR_MEMFAULTPENDED            ((uint32_t)0x00002000)        /*!< MemManage is pended */
+#define  SCB_SHCSR_BUSFAULTPENDED            ((uint32_t)0x00004000)        /*!< Bus Fault is pended */
+#define  SCB_SHCSR_SVCALLPENDED              ((uint32_t)0x00008000)        /*!< SVCall is pended */
+#define  SCB_SHCSR_MEMFAULTENA               ((uint32_t)0x00010000)        /*!< MemManage enable */
+#define  SCB_SHCSR_BUSFAULTENA               ((uint32_t)0x00020000)        /*!< Bus Fault enable */
+#define  SCB_SHCSR_USGFAULTENA               ((uint32_t)0x00040000)        /*!< UsageFault enable */
+
+/*******************  Bit definition for SCB_CFSR register  *******************/
+/*!< MFSR */
+#define  SCB_CFSR_IACCVIOL                   ((uint32_t)0x00000001)        /*!< Instruction access violation */
+#define  SCB_CFSR_DACCVIOL                   ((uint32_t)0x00000002)        /*!< Data access violation */
+#define  SCB_CFSR_MUNSTKERR                  ((uint32_t)0x00000008)        /*!< Unstacking error */
+#define  SCB_CFSR_MSTKERR                    ((uint32_t)0x00000010)        /*!< Stacking error */
+#define  SCB_CFSR_MMARVALID                  ((uint32_t)0x00000080)        /*!< Memory Manage Address Register address valid flag */
+/*!< BFSR */
+#define  SCB_CFSR_IBUSERR                    ((uint32_t)0x00000100)        /*!< Instruction bus error flag */
+#define  SCB_CFSR_PRECISERR                  ((uint32_t)0x00000200)        /*!< Precise data bus error */
+#define  SCB_CFSR_IMPRECISERR                ((uint32_t)0x00000400)        /*!< Imprecise data bus error */
+#define  SCB_CFSR_UNSTKERR                   ((uint32_t)0x00000800)        /*!< Unstacking error */
+#define  SCB_CFSR_STKERR                     ((uint32_t)0x00001000)        /*!< Stacking error */
+#define  SCB_CFSR_BFARVALID                  ((uint32_t)0x00008000)        /*!< Bus Fault Address Register address valid flag */
+/*!< UFSR */
+#define  SCB_CFSR_UNDEFINSTR                 ((uint32_t)0x00010000)        /*!< The processor attempt to execute an undefined instruction */
+#define  SCB_CFSR_INVSTATE                   ((uint32_t)0x00020000)        /*!< Invalid combination of EPSR and instruction */
+#define  SCB_CFSR_INVPC                      ((uint32_t)0x00040000)        /*!< Attempt to load EXC_RETURN into pc illegally */
+#define  SCB_CFSR_NOCP                       ((uint32_t)0x00080000)        /*!< Attempt to use a coprocessor instruction */
+#define  SCB_CFSR_UNALIGNED                  ((uint32_t)0x01000000)        /*!< Fault occurs when there is an attempt to make an unaligned memory access */
+#define  SCB_CFSR_DIVBYZERO                  ((uint32_t)0x02000000)        /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */
+
+/*******************  Bit definition for SCB_HFSR register  *******************/
+#define  SCB_HFSR_VECTTBL                    ((uint32_t)0x00000002)        /*!< Fault occurs because of vector table read on exception processing */
+#define  SCB_HFSR_FORCED                     ((uint32_t)0x40000000)        /*!< Hard Fault activated when a configurable Fault was received and cannot activate */
+#define  SCB_HFSR_DEBUGEVT                   ((uint32_t)0x80000000)        /*!< Fault related to debug */
+
+/*******************  Bit definition for SCB_DFSR register  *******************/
+#define  SCB_DFSR_HALTED                     ((uint8_t)0x01)               /*!< Halt request flag */
+#define  SCB_DFSR_BKPT                       ((uint8_t)0x02)               /*!< BKPT flag */
+#define  SCB_DFSR_DWTTRAP                    ((uint8_t)0x04)               /*!< Data Watchpoint and Trace (DWT) flag */
+#define  SCB_DFSR_VCATCH                     ((uint8_t)0x08)               /*!< Vector catch flag */
+#define  SCB_DFSR_EXTERNAL                   ((uint8_t)0x10)               /*!< External debug request flag */
+
+/*******************  Bit definition for SCB_MMFAR register  ******************/
+#define  SCB_MMFAR_ADDRESS                   ((uint32_t)0xFFFFFFFF)        /*!< Mem Manage fault address field */
+
+/*******************  Bit definition for SCB_BFAR register  *******************/
+#define  SCB_BFAR_ADDRESS                    ((uint32_t)0xFFFFFFFF)        /*!< Bus fault address field */
+
+/*******************  Bit definition for SCB_afsr register  *******************/
+#define  SCB_AFSR_IMPDEF                     ((uint32_t)0xFFFFFFFF)        /*!< Implementation defined */
+
+/******************************************************************************/
+/*                                                                            */
+/*                    External Interrupt/Event Controller                     */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for EXTI_IMR register  *******************/
+#define  EXTI_IMR_MR0                        ((uint32_t)0x00000001)        /*!< Interrupt Mask on line 0 */
+#define  EXTI_IMR_MR1                        ((uint32_t)0x00000002)        /*!< Interrupt Mask on line 1 */
+#define  EXTI_IMR_MR2                        ((uint32_t)0x00000004)        /*!< Interrupt Mask on line 2 */
+#define  EXTI_IMR_MR3                        ((uint32_t)0x00000008)        /*!< Interrupt Mask on line 3 */
+#define  EXTI_IMR_MR4                        ((uint32_t)0x00000010)        /*!< Interrupt Mask on line 4 */
+#define  EXTI_IMR_MR5                        ((uint32_t)0x00000020)        /*!< Interrupt Mask on line 5 */
+#define  EXTI_IMR_MR6                        ((uint32_t)0x00000040)        /*!< Interrupt Mask on line 6 */
+#define  EXTI_IMR_MR7                        ((uint32_t)0x00000080)        /*!< Interrupt Mask on line 7 */
+#define  EXTI_IMR_MR8                        ((uint32_t)0x00000100)        /*!< Interrupt Mask on line 8 */
+#define  EXTI_IMR_MR9                        ((uint32_t)0x00000200)        /*!< Interrupt Mask on line 9 */
+#define  EXTI_IMR_MR10                       ((uint32_t)0x00000400)        /*!< Interrupt Mask on line 10 */
+#define  EXTI_IMR_MR11                       ((uint32_t)0x00000800)        /*!< Interrupt Mask on line 11 */
+#define  EXTI_IMR_MR12                       ((uint32_t)0x00001000)        /*!< Interrupt Mask on line 12 */
+#define  EXTI_IMR_MR13                       ((uint32_t)0x00002000)        /*!< Interrupt Mask on line 13 */
+#define  EXTI_IMR_MR14                       ((uint32_t)0x00004000)        /*!< Interrupt Mask on line 14 */
+#define  EXTI_IMR_MR15                       ((uint32_t)0x00008000)        /*!< Interrupt Mask on line 15 */
+#define  EXTI_IMR_MR16                       ((uint32_t)0x00010000)        /*!< Interrupt Mask on line 16 */
+#define  EXTI_IMR_MR17                       ((uint32_t)0x00020000)        /*!< Interrupt Mask on line 17 */
+#define  EXTI_IMR_MR18                       ((uint32_t)0x00040000)        /*!< Interrupt Mask on line 18 */
+#define  EXTI_IMR_MR19                       ((uint32_t)0x00080000)        /*!< Interrupt Mask on line 19 */
+
+/*******************  Bit definition for EXTI_EMR register  *******************/
+#define  EXTI_EMR_MR0                        ((uint32_t)0x00000001)        /*!< Event Mask on line 0 */
+#define  EXTI_EMR_MR1                        ((uint32_t)0x00000002)        /*!< Event Mask on line 1 */
+#define  EXTI_EMR_MR2                        ((uint32_t)0x00000004)        /*!< Event Mask on line 2 */
+#define  EXTI_EMR_MR3                        ((uint32_t)0x00000008)        /*!< Event Mask on line 3 */
+#define  EXTI_EMR_MR4                        ((uint32_t)0x00000010)        /*!< Event Mask on line 4 */
+#define  EXTI_EMR_MR5                        ((uint32_t)0x00000020)        /*!< Event Mask on line 5 */
+#define  EXTI_EMR_MR6                        ((uint32_t)0x00000040)        /*!< Event Mask on line 6 */
+#define  EXTI_EMR_MR7                        ((uint32_t)0x00000080)        /*!< Event Mask on line 7 */
+#define  EXTI_EMR_MR8                        ((uint32_t)0x00000100)        /*!< Event Mask on line 8 */
+#define  EXTI_EMR_MR9                        ((uint32_t)0x00000200)        /*!< Event Mask on line 9 */
+#define  EXTI_EMR_MR10                       ((uint32_t)0x00000400)        /*!< Event Mask on line 10 */
+#define  EXTI_EMR_MR11                       ((uint32_t)0x00000800)        /*!< Event Mask on line 11 */
+#define  EXTI_EMR_MR12                       ((uint32_t)0x00001000)        /*!< Event Mask on line 12 */
+#define  EXTI_EMR_MR13                       ((uint32_t)0x00002000)        /*!< Event Mask on line 13 */
+#define  EXTI_EMR_MR14                       ((uint32_t)0x00004000)        /*!< Event Mask on line 14 */
+#define  EXTI_EMR_MR15                       ((uint32_t)0x00008000)        /*!< Event Mask on line 15 */
+#define  EXTI_EMR_MR16                       ((uint32_t)0x00010000)        /*!< Event Mask on line 16 */
+#define  EXTI_EMR_MR17                       ((uint32_t)0x00020000)        /*!< Event Mask on line 17 */
+#define  EXTI_EMR_MR18                       ((uint32_t)0x00040000)        /*!< Event Mask on line 18 */
+#define  EXTI_EMR_MR19                       ((uint32_t)0x00080000)        /*!< Event Mask on line 19 */
+
+/******************  Bit definition for EXTI_RTSR register  *******************/
+#define  EXTI_RTSR_TR0                       ((uint32_t)0x00000001)        /*!< Rising trigger event configuration bit of line 0 */
+#define  EXTI_RTSR_TR1                       ((uint32_t)0x00000002)        /*!< Rising trigger event configuration bit of line 1 */
+#define  EXTI_RTSR_TR2                       ((uint32_t)0x00000004)        /*!< Rising trigger event configuration bit of line 2 */
+#define  EXTI_RTSR_TR3                       ((uint32_t)0x00000008)        /*!< Rising trigger event configuration bit of line 3 */
+#define  EXTI_RTSR_TR4                       ((uint32_t)0x00000010)        /*!< Rising trigger event configuration bit of line 4 */
+#define  EXTI_RTSR_TR5                       ((uint32_t)0x00000020)        /*!< Rising trigger event configuration bit of line 5 */
+#define  EXTI_RTSR_TR6                       ((uint32_t)0x00000040)        /*!< Rising trigger event configuration bit of line 6 */
+#define  EXTI_RTSR_TR7                       ((uint32_t)0x00000080)        /*!< Rising trigger event configuration bit of line 7 */
+#define  EXTI_RTSR_TR8                       ((uint32_t)0x00000100)        /*!< Rising trigger event configuration bit of line 8 */
+#define  EXTI_RTSR_TR9                       ((uint32_t)0x00000200)        /*!< Rising trigger event configuration bit of line 9 */
+#define  EXTI_RTSR_TR10                      ((uint32_t)0x00000400)        /*!< Rising trigger event configuration bit of line 10 */
+#define  EXTI_RTSR_TR11                      ((uint32_t)0x00000800)        /*!< Rising trigger event configuration bit of line 11 */
+#define  EXTI_RTSR_TR12                      ((uint32_t)0x00001000)        /*!< Rising trigger event configuration bit of line 12 */
+#define  EXTI_RTSR_TR13                      ((uint32_t)0x00002000)        /*!< Rising trigger event configuration bit of line 13 */
+#define  EXTI_RTSR_TR14                      ((uint32_t)0x00004000)        /*!< Rising trigger event configuration bit of line 14 */
+#define  EXTI_RTSR_TR15                      ((uint32_t)0x00008000)        /*!< Rising trigger event configuration bit of line 15 */
+#define  EXTI_RTSR_TR16                      ((uint32_t)0x00010000)        /*!< Rising trigger event configuration bit of line 16 */
+#define  EXTI_RTSR_TR17                      ((uint32_t)0x00020000)        /*!< Rising trigger event configuration bit of line 17 */
+#define  EXTI_RTSR_TR18                      ((uint32_t)0x00040000)        /*!< Rising trigger event configuration bit of line 18 */
+#define  EXTI_RTSR_TR19                      ((uint32_t)0x00080000)        /*!< Rising trigger event configuration bit of line 19 */
+
+/******************  Bit definition for EXTI_FTSR register  *******************/
+#define  EXTI_FTSR_TR0                       ((uint32_t)0x00000001)        /*!< Falling trigger event configuration bit of line 0 */
+#define  EXTI_FTSR_TR1                       ((uint32_t)0x00000002)        /*!< Falling trigger event configuration bit of line 1 */
+#define  EXTI_FTSR_TR2                       ((uint32_t)0x00000004)        /*!< Falling trigger event configuration bit of line 2 */
+#define  EXTI_FTSR_TR3                       ((uint32_t)0x00000008)        /*!< Falling trigger event configuration bit of line 3 */
+#define  EXTI_FTSR_TR4                       ((uint32_t)0x00000010)        /*!< Falling trigger event configuration bit of line 4 */
+#define  EXTI_FTSR_TR5                       ((uint32_t)0x00000020)        /*!< Falling trigger event configuration bit of line 5 */
+#define  EXTI_FTSR_TR6                       ((uint32_t)0x00000040)        /*!< Falling trigger event configuration bit of line 6 */
+#define  EXTI_FTSR_TR7                       ((uint32_t)0x00000080)        /*!< Falling trigger event configuration bit of line 7 */
+#define  EXTI_FTSR_TR8                       ((uint32_t)0x00000100)        /*!< Falling trigger event configuration bit of line 8 */
+#define  EXTI_FTSR_TR9                       ((uint32_t)0x00000200)        /*!< Falling trigger event configuration bit of line 9 */
+#define  EXTI_FTSR_TR10                      ((uint32_t)0x00000400)        /*!< Falling trigger event configuration bit of line 10 */
+#define  EXTI_FTSR_TR11                      ((uint32_t)0x00000800)        /*!< Falling trigger event configuration bit of line 11 */
+#define  EXTI_FTSR_TR12                      ((uint32_t)0x00001000)        /*!< Falling trigger event configuration bit of line 12 */
+#define  EXTI_FTSR_TR13                      ((uint32_t)0x00002000)        /*!< Falling trigger event configuration bit of line 13 */
+#define  EXTI_FTSR_TR14                      ((uint32_t)0x00004000)        /*!< Falling trigger event configuration bit of line 14 */
+#define  EXTI_FTSR_TR15                      ((uint32_t)0x00008000)        /*!< Falling trigger event configuration bit of line 15 */
+#define  EXTI_FTSR_TR16                      ((uint32_t)0x00010000)        /*!< Falling trigger event configuration bit of line 16 */
+#define  EXTI_FTSR_TR17                      ((uint32_t)0x00020000)        /*!< Falling trigger event configuration bit of line 17 */
+#define  EXTI_FTSR_TR18                      ((uint32_t)0x00040000)        /*!< Falling trigger event configuration bit of line 18 */
+#define  EXTI_FTSR_TR19                      ((uint32_t)0x00080000)        /*!< Falling trigger event configuration bit of line 19 */
+
+/******************  Bit definition for EXTI_SWIER register  ******************/
+#define  EXTI_SWIER_SWIER0                   ((uint32_t)0x00000001)        /*!< Software Interrupt on line 0 */
+#define  EXTI_SWIER_SWIER1                   ((uint32_t)0x00000002)        /*!< Software Interrupt on line 1 */
+#define  EXTI_SWIER_SWIER2                   ((uint32_t)0x00000004)        /*!< Software Interrupt on line 2 */
+#define  EXTI_SWIER_SWIER3                   ((uint32_t)0x00000008)        /*!< Software Interrupt on line 3 */
+#define  EXTI_SWIER_SWIER4                   ((uint32_t)0x00000010)        /*!< Software Interrupt on line 4 */
+#define  EXTI_SWIER_SWIER5                   ((uint32_t)0x00000020)        /*!< Software Interrupt on line 5 */
+#define  EXTI_SWIER_SWIER6                   ((uint32_t)0x00000040)        /*!< Software Interrupt on line 6 */
+#define  EXTI_SWIER_SWIER7                   ((uint32_t)0x00000080)        /*!< Software Interrupt on line 7 */
+#define  EXTI_SWIER_SWIER8                   ((uint32_t)0x00000100)        /*!< Software Interrupt on line 8 */
+#define  EXTI_SWIER_SWIER9                   ((uint32_t)0x00000200)        /*!< Software Interrupt on line 9 */
+#define  EXTI_SWIER_SWIER10                  ((uint32_t)0x00000400)        /*!< Software Interrupt on line 10 */
+#define  EXTI_SWIER_SWIER11                  ((uint32_t)0x00000800)        /*!< Software Interrupt on line 11 */
+#define  EXTI_SWIER_SWIER12                  ((uint32_t)0x00001000)        /*!< Software Interrupt on line 12 */
+#define  EXTI_SWIER_SWIER13                  ((uint32_t)0x00002000)        /*!< Software Interrupt on line 13 */
+#define  EXTI_SWIER_SWIER14                  ((uint32_t)0x00004000)        /*!< Software Interrupt on line 14 */
+#define  EXTI_SWIER_SWIER15                  ((uint32_t)0x00008000)        /*!< Software Interrupt on line 15 */
+#define  EXTI_SWIER_SWIER16                  ((uint32_t)0x00010000)        /*!< Software Interrupt on line 16 */
+#define  EXTI_SWIER_SWIER17                  ((uint32_t)0x00020000)        /*!< Software Interrupt on line 17 */
+#define  EXTI_SWIER_SWIER18                  ((uint32_t)0x00040000)        /*!< Software Interrupt on line 18 */
+#define  EXTI_SWIER_SWIER19                  ((uint32_t)0x00080000)        /*!< Software Interrupt on line 19 */
+
+/*******************  Bit definition for EXTI_PR register  ********************/
+#define  EXTI_PR_PR0                         ((uint32_t)0x00000001)        /*!< Pending bit for line 0 */
+#define  EXTI_PR_PR1                         ((uint32_t)0x00000002)        /*!< Pending bit for line 1 */
+#define  EXTI_PR_PR2                         ((uint32_t)0x00000004)        /*!< Pending bit for line 2 */
+#define  EXTI_PR_PR3                         ((uint32_t)0x00000008)        /*!< Pending bit for line 3 */
+#define  EXTI_PR_PR4                         ((uint32_t)0x00000010)        /*!< Pending bit for line 4 */
+#define  EXTI_PR_PR5                         ((uint32_t)0x00000020)        /*!< Pending bit for line 5 */
+#define  EXTI_PR_PR6                         ((uint32_t)0x00000040)        /*!< Pending bit for line 6 */
+#define  EXTI_PR_PR7                         ((uint32_t)0x00000080)        /*!< Pending bit for line 7 */
+#define  EXTI_PR_PR8                         ((uint32_t)0x00000100)        /*!< Pending bit for line 8 */
+#define  EXTI_PR_PR9                         ((uint32_t)0x00000200)        /*!< Pending bit for line 9 */
+#define  EXTI_PR_PR10                        ((uint32_t)0x00000400)        /*!< Pending bit for line 10 */
+#define  EXTI_PR_PR11                        ((uint32_t)0x00000800)        /*!< Pending bit for line 11 */
+#define  EXTI_PR_PR12                        ((uint32_t)0x00001000)        /*!< Pending bit for line 12 */
+#define  EXTI_PR_PR13                        ((uint32_t)0x00002000)        /*!< Pending bit for line 13 */
+#define  EXTI_PR_PR14                        ((uint32_t)0x00004000)        /*!< Pending bit for line 14 */
+#define  EXTI_PR_PR15                        ((uint32_t)0x00008000)        /*!< Pending bit for line 15 */
+#define  EXTI_PR_PR16                        ((uint32_t)0x00010000)        /*!< Pending bit for line 16 */
+#define  EXTI_PR_PR17                        ((uint32_t)0x00020000)        /*!< Pending bit for line 17 */
+#define  EXTI_PR_PR18                        ((uint32_t)0x00040000)        /*!< Pending bit for line 18 */
+#define  EXTI_PR_PR19                        ((uint32_t)0x00080000)        /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             DMA Controller                                 */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for DMA_ISR register  ********************/
+#define  DMA_ISR_GIF1                        ((uint32_t)0x00000001)        /*!< Channel 1 Global interrupt flag */
+#define  DMA_ISR_TCIF1                       ((uint32_t)0x00000002)        /*!< Channel 1 Transfer Complete flag */
+#define  DMA_ISR_HTIF1                       ((uint32_t)0x00000004)        /*!< Channel 1 Half Transfer flag */
+#define  DMA_ISR_TEIF1                       ((uint32_t)0x00000008)        /*!< Channel 1 Transfer Error flag */
+#define  DMA_ISR_GIF2                        ((uint32_t)0x00000010)        /*!< Channel 2 Global interrupt flag */
+#define  DMA_ISR_TCIF2                       ((uint32_t)0x00000020)        /*!< Channel 2 Transfer Complete flag */
+#define  DMA_ISR_HTIF2                       ((uint32_t)0x00000040)        /*!< Channel 2 Half Transfer flag */
+#define  DMA_ISR_TEIF2                       ((uint32_t)0x00000080)        /*!< Channel 2 Transfer Error flag */
+#define  DMA_ISR_GIF3                        ((uint32_t)0x00000100)        /*!< Channel 3 Global interrupt flag */
+#define  DMA_ISR_TCIF3                       ((uint32_t)0x00000200)        /*!< Channel 3 Transfer Complete flag */
+#define  DMA_ISR_HTIF3                       ((uint32_t)0x00000400)        /*!< Channel 3 Half Transfer flag */
+#define  DMA_ISR_TEIF3                       ((uint32_t)0x00000800)        /*!< Channel 3 Transfer Error flag */
+#define  DMA_ISR_GIF4                        ((uint32_t)0x00001000)        /*!< Channel 4 Global interrupt flag */
+#define  DMA_ISR_TCIF4                       ((uint32_t)0x00002000)        /*!< Channel 4 Transfer Complete flag */
+#define  DMA_ISR_HTIF4                       ((uint32_t)0x00004000)        /*!< Channel 4 Half Transfer flag */
+#define  DMA_ISR_TEIF4                       ((uint32_t)0x00008000)        /*!< Channel 4 Transfer Error flag */
+#define  DMA_ISR_GIF5                        ((uint32_t)0x00010000)        /*!< Channel 5 Global interrupt flag */
+#define  DMA_ISR_TCIF5                       ((uint32_t)0x00020000)        /*!< Channel 5 Transfer Complete flag */
+#define  DMA_ISR_HTIF5                       ((uint32_t)0x00040000)        /*!< Channel 5 Half Transfer flag */
+#define  DMA_ISR_TEIF5                       ((uint32_t)0x00080000)        /*!< Channel 5 Transfer Error flag */
+#define  DMA_ISR_GIF6                        ((uint32_t)0x00100000)        /*!< Channel 6 Global interrupt flag */
+#define  DMA_ISR_TCIF6                       ((uint32_t)0x00200000)        /*!< Channel 6 Transfer Complete flag */
+#define  DMA_ISR_HTIF6                       ((uint32_t)0x00400000)        /*!< Channel 6 Half Transfer flag */
+#define  DMA_ISR_TEIF6                       ((uint32_t)0x00800000)        /*!< Channel 6 Transfer Error flag */
+#define  DMA_ISR_GIF7                        ((uint32_t)0x01000000)        /*!< Channel 7 Global interrupt flag */
+#define  DMA_ISR_TCIF7                       ((uint32_t)0x02000000)        /*!< Channel 7 Transfer Complete flag */
+#define  DMA_ISR_HTIF7                       ((uint32_t)0x04000000)        /*!< Channel 7 Half Transfer flag */
+#define  DMA_ISR_TEIF7                       ((uint32_t)0x08000000)        /*!< Channel 7 Transfer Error flag */
+
+/*******************  Bit definition for DMA_IFCR register  *******************/
+#define  DMA_IFCR_CGIF1                      ((uint32_t)0x00000001)        /*!< Channel 1 Global interrupt clear */
+#define  DMA_IFCR_CTCIF1                     ((uint32_t)0x00000002)        /*!< Channel 1 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF1                     ((uint32_t)0x00000004)        /*!< Channel 1 Half Transfer clear */
+#define  DMA_IFCR_CTEIF1                     ((uint32_t)0x00000008)        /*!< Channel 1 Transfer Error clear */
+#define  DMA_IFCR_CGIF2                      ((uint32_t)0x00000010)        /*!< Channel 2 Global interrupt clear */
+#define  DMA_IFCR_CTCIF2                     ((uint32_t)0x00000020)        /*!< Channel 2 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF2                     ((uint32_t)0x00000040)        /*!< Channel 2 Half Transfer clear */
+#define  DMA_IFCR_CTEIF2                     ((uint32_t)0x00000080)        /*!< Channel 2 Transfer Error clear */
+#define  DMA_IFCR_CGIF3                      ((uint32_t)0x00000100)        /*!< Channel 3 Global interrupt clear */
+#define  DMA_IFCR_CTCIF3                     ((uint32_t)0x00000200)        /*!< Channel 3 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF3                     ((uint32_t)0x00000400)        /*!< Channel 3 Half Transfer clear */
+#define  DMA_IFCR_CTEIF3                     ((uint32_t)0x00000800)        /*!< Channel 3 Transfer Error clear */
+#define  DMA_IFCR_CGIF4                      ((uint32_t)0x00001000)        /*!< Channel 4 Global interrupt clear */
+#define  DMA_IFCR_CTCIF4                     ((uint32_t)0x00002000)        /*!< Channel 4 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF4                     ((uint32_t)0x00004000)        /*!< Channel 4 Half Transfer clear */
+#define  DMA_IFCR_CTEIF4                     ((uint32_t)0x00008000)        /*!< Channel 4 Transfer Error clear */
+#define  DMA_IFCR_CGIF5                      ((uint32_t)0x00010000)        /*!< Channel 5 Global interrupt clear */
+#define  DMA_IFCR_CTCIF5                     ((uint32_t)0x00020000)        /*!< Channel 5 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF5                     ((uint32_t)0x00040000)        /*!< Channel 5 Half Transfer clear */
+#define  DMA_IFCR_CTEIF5                     ((uint32_t)0x00080000)        /*!< Channel 5 Transfer Error clear */
+#define  DMA_IFCR_CGIF6                      ((uint32_t)0x00100000)        /*!< Channel 6 Global interrupt clear */
+#define  DMA_IFCR_CTCIF6                     ((uint32_t)0x00200000)        /*!< Channel 6 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF6                     ((uint32_t)0x00400000)        /*!< Channel 6 Half Transfer clear */
+#define  DMA_IFCR_CTEIF6                     ((uint32_t)0x00800000)        /*!< Channel 6 Transfer Error clear */
+#define  DMA_IFCR_CGIF7                      ((uint32_t)0x01000000)        /*!< Channel 7 Global interrupt clear */
+#define  DMA_IFCR_CTCIF7                     ((uint32_t)0x02000000)        /*!< Channel 7 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF7                     ((uint32_t)0x04000000)        /*!< Channel 7 Half Transfer clear */
+#define  DMA_IFCR_CTEIF7                     ((uint32_t)0x08000000)        /*!< Channel 7 Transfer Error clear */
+
+/*******************  Bit definition for DMA_CCR1 register  *******************/
+#define  DMA_CCR1_EN                         ((uint16_t)0x0001)            /*!< Channel enable*/
+#define  DMA_CCR1_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR1_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR1_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR1_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR1_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR1_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR1_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR1_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR1_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR1_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR1_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR1_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR1_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR1_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits(Channel Priority level) */
+#define  DMA_CCR1_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR1_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR1_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*******************  Bit definition for DMA_CCR2 register  *******************/
+#define  DMA_CCR2_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR2_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR2_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR2_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR2_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR2_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR2_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR2_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR2_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR2_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR2_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR2_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR2_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR2_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR2_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR2_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR2_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR2_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*******************  Bit definition for DMA_CCR3 register  *******************/
+#define  DMA_CCR3_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR3_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR3_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR3_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR3_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR3_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR3_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR3_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR3_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR3_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR3_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR3_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR3_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR3_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR3_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR3_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR3_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR3_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*!<******************  Bit definition for DMA_CCR4 register  *******************/
+#define  DMA_CCR4_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR4_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR4_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR4_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR4_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR4_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR4_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR4_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR4_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR4_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR4_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR4_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR4_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR4_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR4_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR4_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR4_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR4_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/******************  Bit definition for DMA_CCR5 register  *******************/
+#define  DMA_CCR5_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR5_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR5_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR5_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR5_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR5_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR5_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR5_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR5_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR5_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR5_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR5_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR5_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR5_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR5_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR5_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR5_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR5_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode enable */
+
+/*******************  Bit definition for DMA_CCR6 register  *******************/
+#define  DMA_CCR6_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR6_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR6_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR6_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR6_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR6_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR6_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR6_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR6_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR6_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR6_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR6_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR6_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR6_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR6_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR6_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR6_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR6_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*******************  Bit definition for DMA_CCR7 register  *******************/
+#define  DMA_CCR7_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR7_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR7_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR7_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR7_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR7_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR7_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR7_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR7_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR7_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR7_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR7_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR7_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR7_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR7_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR7_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR7_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR7_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode enable */
+
+/******************  Bit definition for DMA_CNDTR1 register  ******************/
+#define  DMA_CNDTR1_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR2 register  ******************/
+#define  DMA_CNDTR2_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR3 register  ******************/
+#define  DMA_CNDTR3_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR4 register  ******************/
+#define  DMA_CNDTR4_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR5 register  ******************/
+#define  DMA_CNDTR5_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR6 register  ******************/
+#define  DMA_CNDTR6_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR7 register  ******************/
+#define  DMA_CNDTR7_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CPAR1 register  *******************/
+#define  DMA_CPAR1_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR2 register  *******************/
+#define  DMA_CPAR2_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR3 register  *******************/
+#define  DMA_CPAR3_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+
+/******************  Bit definition for DMA_CPAR4 register  *******************/
+#define  DMA_CPAR4_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR5 register  *******************/
+#define  DMA_CPAR5_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR6 register  *******************/
+#define  DMA_CPAR6_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+
+/******************  Bit definition for DMA_CPAR7 register  *******************/
+#define  DMA_CPAR7_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CMAR1 register  *******************/
+#define  DMA_CMAR1_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR2 register  *******************/
+#define  DMA_CMAR2_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR3 register  *******************/
+#define  DMA_CMAR3_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+
+/******************  Bit definition for DMA_CMAR4 register  *******************/
+#define  DMA_CMAR4_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR5 register  *******************/
+#define  DMA_CMAR5_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR6 register  *******************/
+#define  DMA_CMAR6_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR7 register  *******************/
+#define  DMA_CMAR7_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Analog to Digital Converter                         */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for ADC_SR register  ********************/
+#define  ADC_SR_AWD                          ((uint8_t)0x01)               /*!< Analog watchdog flag */
+#define  ADC_SR_EOC                          ((uint8_t)0x02)               /*!< End of conversion */
+#define  ADC_SR_JEOC                         ((uint8_t)0x04)               /*!< Injected channel end of conversion */
+#define  ADC_SR_JSTRT                        ((uint8_t)0x08)               /*!< Injected channel Start flag */
+#define  ADC_SR_STRT                         ((uint8_t)0x10)               /*!< Regular channel Start flag */
+
+/*******************  Bit definition for ADC_CR1 register  ********************/
+#define  ADC_CR1_AWDCH                       ((uint32_t)0x0000001F)        /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define  ADC_CR1_AWDCH_0                     ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_CR1_AWDCH_1                     ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_CR1_AWDCH_2                     ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_CR1_AWDCH_3                     ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_CR1_AWDCH_4                     ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_CR1_EOCIE                       ((uint32_t)0x00000020)        /*!< Interrupt enable for EOC */
+#define  ADC_CR1_AWDIE                       ((uint32_t)0x00000040)        /*!< Analog Watchdog interrupt enable */
+#define  ADC_CR1_JEOCIE                      ((uint32_t)0x00000080)        /*!< Interrupt enable for injected channels */
+#define  ADC_CR1_SCAN                        ((uint32_t)0x00000100)        /*!< Scan mode */
+#define  ADC_CR1_AWDSGL                      ((uint32_t)0x00000200)        /*!< Enable the watchdog on a single channel in scan mode */
+#define  ADC_CR1_JAUTO                       ((uint32_t)0x00000400)        /*!< Automatic injected group conversion */
+#define  ADC_CR1_DISCEN                      ((uint32_t)0x00000800)        /*!< Discontinuous mode on regular channels */
+#define  ADC_CR1_JDISCEN                     ((uint32_t)0x00001000)        /*!< Discontinuous mode on injected channels */
+
+#define  ADC_CR1_DISCNUM                     ((uint32_t)0x0000E000)        /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define  ADC_CR1_DISCNUM_0                   ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  ADC_CR1_DISCNUM_1                   ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  ADC_CR1_DISCNUM_2                   ((uint32_t)0x00008000)        /*!< Bit 2 */
+
+#define  ADC_CR1_DUALMOD                     ((uint32_t)0x000F0000)        /*!< DUALMOD[3:0] bits (Dual mode selection) */
+#define  ADC_CR1_DUALMOD_0                   ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  ADC_CR1_DUALMOD_1                   ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  ADC_CR1_DUALMOD_2                   ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  ADC_CR1_DUALMOD_3                   ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  ADC_CR1_JAWDEN                      ((uint32_t)0x00400000)        /*!< Analog watchdog enable on injected channels */
+#define  ADC_CR1_AWDEN                       ((uint32_t)0x00800000)        /*!< Analog watchdog enable on regular channels */
+
+  
+/*******************  Bit definition for ADC_CR2 register  ********************/
+#define  ADC_CR2_ADON                        ((uint32_t)0x00000001)        /*!< A/D Converter ON / OFF */
+#define  ADC_CR2_CONT                        ((uint32_t)0x00000002)        /*!< Continuous Conversion */
+#define  ADC_CR2_CAL                         ((uint32_t)0x00000004)        /*!< A/D Calibration */
+#define  ADC_CR2_RSTCAL                      ((uint32_t)0x00000008)        /*!< Reset Calibration */
+#define  ADC_CR2_DMA                         ((uint32_t)0x00000100)        /*!< Direct Memory access mode */
+#define  ADC_CR2_ALIGN                       ((uint32_t)0x00000800)        /*!< Data Alignment */
+
+#define  ADC_CR2_JEXTSEL                     ((uint32_t)0x00007000)        /*!< JEXTSEL[2:0] bits (External event select for injected group) */
+#define  ADC_CR2_JEXTSEL_0                   ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  ADC_CR2_JEXTSEL_1                   ((uint32_t)0x00002000)        /*!< Bit 1 */
+#define  ADC_CR2_JEXTSEL_2                   ((uint32_t)0x00004000)        /*!< Bit 2 */
+
+#define  ADC_CR2_JEXTTRIG                    ((uint32_t)0x00008000)        /*!< External Trigger Conversion mode for injected channels */
+
+#define  ADC_CR2_EXTSEL                      ((uint32_t)0x000E0000)        /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define  ADC_CR2_EXTSEL_0                    ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  ADC_CR2_EXTSEL_1                    ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  ADC_CR2_EXTSEL_2                    ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+#define  ADC_CR2_EXTTRIG                     ((uint32_t)0x00100000)        /*!< External Trigger Conversion mode for regular channels */
+#define  ADC_CR2_JSWSTART                    ((uint32_t)0x00200000)        /*!< Start Conversion of injected channels */
+#define  ADC_CR2_SWSTART                     ((uint32_t)0x00400000)        /*!< Start Conversion of regular channels */
+#define  ADC_CR2_TSVREFE                     ((uint32_t)0x00800000)        /*!< Temperature Sensor and VREFINT Enable */
+
+/******************  Bit definition for ADC_SMPR1 register  *******************/
+#define  ADC_SMPR1_SMP10                     ((uint32_t)0x00000007)        /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define  ADC_SMPR1_SMP10_0                   ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP10_1                   ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP10_2                   ((uint32_t)0x00000004)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP11                     ((uint32_t)0x00000038)        /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define  ADC_SMPR1_SMP11_0                   ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP11_1                   ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP11_2                   ((uint32_t)0x00000020)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP12                     ((uint32_t)0x000001C0)        /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define  ADC_SMPR1_SMP12_0                   ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP12_1                   ((uint32_t)0x00000080)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP12_2                   ((uint32_t)0x00000100)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP13                     ((uint32_t)0x00000E00)        /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define  ADC_SMPR1_SMP13_0                   ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP13_1                   ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP13_2                   ((uint32_t)0x00000800)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP14                     ((uint32_t)0x00007000)        /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define  ADC_SMPR1_SMP14_0                   ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP14_1                   ((uint32_t)0x00002000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP14_2                   ((uint32_t)0x00004000)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP15                     ((uint32_t)0x00038000)        /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define  ADC_SMPR1_SMP15_0                   ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP15_1                   ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP15_2                   ((uint32_t)0x00020000)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP16                     ((uint32_t)0x001C0000)        /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define  ADC_SMPR1_SMP16_0                   ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP16_1                   ((uint32_t)0x00080000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP16_2                   ((uint32_t)0x00100000)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP17                     ((uint32_t)0x00E00000)        /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define  ADC_SMPR1_SMP17_0                   ((uint32_t)0x00200000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP17_1                   ((uint32_t)0x00400000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP17_2                   ((uint32_t)0x00800000)        /*!< Bit 2 */
+
+/******************  Bit definition for ADC_SMPR2 register  *******************/
+#define  ADC_SMPR2_SMP0                      ((uint32_t)0x00000007)        /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define  ADC_SMPR2_SMP0_0                    ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP0_1                    ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP0_2                    ((uint32_t)0x00000004)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP1                      ((uint32_t)0x00000038)        /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define  ADC_SMPR2_SMP1_0                    ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP1_1                    ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP1_2                    ((uint32_t)0x00000020)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP2                      ((uint32_t)0x000001C0)        /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define  ADC_SMPR2_SMP2_0                    ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP2_1                    ((uint32_t)0x00000080)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP2_2                    ((uint32_t)0x00000100)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP3                      ((uint32_t)0x00000E00)        /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define  ADC_SMPR2_SMP3_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP3_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP3_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP4                      ((uint32_t)0x00007000)        /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define  ADC_SMPR2_SMP4_0                    ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP4_1                    ((uint32_t)0x00002000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP4_2                    ((uint32_t)0x00004000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP5                      ((uint32_t)0x00038000)        /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define  ADC_SMPR2_SMP5_0                    ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP5_1                    ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP5_2                    ((uint32_t)0x00020000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP6                      ((uint32_t)0x001C0000)        /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define  ADC_SMPR2_SMP6_0                    ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP6_1                    ((uint32_t)0x00080000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP6_2                    ((uint32_t)0x00100000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP7                      ((uint32_t)0x00E00000)        /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define  ADC_SMPR2_SMP7_0                    ((uint32_t)0x00200000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP7_1                    ((uint32_t)0x00400000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP7_2                    ((uint32_t)0x00800000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP8                      ((uint32_t)0x07000000)        /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define  ADC_SMPR2_SMP8_0                    ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP8_1                    ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP8_2                    ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP9                      ((uint32_t)0x38000000)        /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define  ADC_SMPR2_SMP9_0                    ((uint32_t)0x08000000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP9_1                    ((uint32_t)0x10000000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP9_2                    ((uint32_t)0x20000000)        /*!< Bit 2 */
+
+/******************  Bit definition for ADC_JOFR1 register  *******************/
+#define  ADC_JOFR1_JOFFSET1                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 1 */
+
+/******************  Bit definition for ADC_JOFR2 register  *******************/
+#define  ADC_JOFR2_JOFFSET2                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 2 */
+
+/******************  Bit definition for ADC_JOFR3 register  *******************/
+#define  ADC_JOFR3_JOFFSET3                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 3 */
+
+/******************  Bit definition for ADC_JOFR4 register  *******************/
+#define  ADC_JOFR4_JOFFSET4                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 4 */
+
+/*******************  Bit definition for ADC_HTR register  ********************/
+#define  ADC_HTR_HT                          ((uint16_t)0x0FFF)            /*!< Analog watchdog high threshold */
+
+/*******************  Bit definition for ADC_LTR register  ********************/
+#define  ADC_LTR_LT                          ((uint16_t)0x0FFF)            /*!< Analog watchdog low threshold */
+
+/*******************  Bit definition for ADC_SQR1 register  *******************/
+#define  ADC_SQR1_SQ13                       ((uint32_t)0x0000001F)        /*!< SQ13[4:0] bits (13th conversion in regular sequence) */
+#define  ADC_SQR1_SQ13_0                     ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ13_1                     ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ13_2                     ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ13_3                     ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ13_4                     ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_SQR1_SQ14                       ((uint32_t)0x000003E0)        /*!< SQ14[4:0] bits (14th conversion in regular sequence) */
+#define  ADC_SQR1_SQ14_0                     ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ14_1                     ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ14_2                     ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ14_3                     ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ14_4                     ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_SQR1_SQ15                       ((uint32_t)0x00007C00)        /*!< SQ15[4:0] bits (15th conversion in regular sequence) */
+#define  ADC_SQR1_SQ15_0                     ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ15_1                     ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ15_2                     ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ15_3                     ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ15_4                     ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_SQR1_SQ16                       ((uint32_t)0x000F8000)        /*!< SQ16[4:0] bits (16th conversion in regular sequence) */
+#define  ADC_SQR1_SQ16_0                     ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ16_1                     ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ16_2                     ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ16_3                     ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ16_4                     ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_SQR1_L                          ((uint32_t)0x00F00000)        /*!< L[3:0] bits (Regular channel sequence length) */
+#define  ADC_SQR1_L_0                        ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_SQR1_L_1                        ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  ADC_SQR1_L_2                        ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  ADC_SQR1_L_3                        ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+/*******************  Bit definition for ADC_SQR2 register  *******************/
+#define  ADC_SQR2_SQ7                        ((uint32_t)0x0000001F)        /*!< SQ7[4:0] bits (7th conversion in regular sequence) */
+#define  ADC_SQR2_SQ7_0                      ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ7_1                      ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ7_2                      ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ7_3                      ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ7_4                      ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ8                        ((uint32_t)0x000003E0)        /*!< SQ8[4:0] bits (8th conversion in regular sequence) */
+#define  ADC_SQR2_SQ8_0                      ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ8_1                      ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ8_2                      ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ8_3                      ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ8_4                      ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ9                        ((uint32_t)0x00007C00)        /*!< SQ9[4:0] bits (9th conversion in regular sequence) */
+#define  ADC_SQR2_SQ9_0                      ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ9_1                      ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ9_2                      ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ9_3                      ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ9_4                      ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ10                       ((uint32_t)0x000F8000)        /*!< SQ10[4:0] bits (10th conversion in regular sequence) */
+#define  ADC_SQR2_SQ10_0                     ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ10_1                     ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ10_2                     ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ10_3                     ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ10_4                     ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ11                       ((uint32_t)0x01F00000)        /*!< SQ11[4:0] bits (11th conversion in regular sequence) */
+#define  ADC_SQR2_SQ11_0                     ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ11_1                     ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ11_2                     ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ11_3                     ((uint32_t)0x00800000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ11_4                     ((uint32_t)0x01000000)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ12                       ((uint32_t)0x3E000000)        /*!< SQ12[4:0] bits (12th conversion in regular sequence) */
+#define  ADC_SQR2_SQ12_0                     ((uint32_t)0x02000000)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ12_1                     ((uint32_t)0x04000000)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ12_2                     ((uint32_t)0x08000000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ12_3                     ((uint32_t)0x10000000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ12_4                     ((uint32_t)0x20000000)        /*!< Bit 4 */
+
+/*******************  Bit definition for ADC_SQR3 register  *******************/
+#define  ADC_SQR3_SQ1                        ((uint32_t)0x0000001F)        /*!< SQ1[4:0] bits (1st conversion in regular sequence) */
+#define  ADC_SQR3_SQ1_0                      ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ1_1                      ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ1_2                      ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ1_3                      ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ1_4                      ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ2                        ((uint32_t)0x000003E0)        /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define  ADC_SQR3_SQ2_0                      ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ2_1                      ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ2_2                      ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ2_3                      ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ2_4                      ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ3                        ((uint32_t)0x00007C00)        /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define  ADC_SQR3_SQ3_0                      ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ3_1                      ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ3_2                      ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ3_3                      ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ3_4                      ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ4                        ((uint32_t)0x000F8000)        /*!< SQ4[4:0] bits (4th conversion in regular sequence) */
+#define  ADC_SQR3_SQ4_0                      ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ4_1                      ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ4_2                      ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ4_3                      ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ4_4                      ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ5                        ((uint32_t)0x01F00000)        /*!< SQ5[4:0] bits (5th conversion in regular sequence) */
+#define  ADC_SQR3_SQ5_0                      ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ5_1                      ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ5_2                      ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ5_3                      ((uint32_t)0x00800000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ5_4                      ((uint32_t)0x01000000)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ6                        ((uint32_t)0x3E000000)        /*!< SQ6[4:0] bits (6th conversion in regular sequence) */
+#define  ADC_SQR3_SQ6_0                      ((uint32_t)0x02000000)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ6_1                      ((uint32_t)0x04000000)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ6_2                      ((uint32_t)0x08000000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ6_3                      ((uint32_t)0x10000000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ6_4                      ((uint32_t)0x20000000)        /*!< Bit 4 */
+
+/*******************  Bit definition for ADC_JSQR register  *******************/
+#define  ADC_JSQR_JSQ1                       ((uint32_t)0x0000001F)        /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */  
+#define  ADC_JSQR_JSQ1_0                     ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ1_1                     ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ1_2                     ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ1_3                     ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ1_4                     ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JSQ2                       ((uint32_t)0x000003E0)        /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ2_0                     ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ2_1                     ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ2_2                     ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ2_3                     ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ2_4                     ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JSQ3                       ((uint32_t)0x00007C00)        /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ3_0                     ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ3_1                     ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ3_2                     ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ3_3                     ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ3_4                     ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JSQ4                       ((uint32_t)0x000F8000)        /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define  ADC_JSQR_JSQ4_0                     ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ4_1                     ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ4_2                     ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ4_3                     ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ4_4                     ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JL                         ((uint32_t)0x00300000)        /*!< JL[1:0] bits (Injected Sequence length) */
+#define  ADC_JSQR_JL_0                       ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_JSQR_JL_1                       ((uint32_t)0x00200000)        /*!< Bit 1 */
+
+/*******************  Bit definition for ADC_JDR1 register  *******************/
+#define  ADC_JDR1_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/*******************  Bit definition for ADC_JDR2 register  *******************/
+#define  ADC_JDR2_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/*******************  Bit definition for ADC_JDR3 register  *******************/
+#define  ADC_JDR3_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/*******************  Bit definition for ADC_JDR4 register  *******************/
+#define  ADC_JDR4_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/********************  Bit definition for ADC_DR register  ********************/
+#define  ADC_DR_DATA                         ((uint32_t)0x0000FFFF)        /*!< Regular data */
+#define  ADC_DR_ADC2DATA                     ((uint32_t)0xFFFF0000)        /*!< ADC2 data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Digital to Analog Converter                           */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for DAC_CR register  ********************/
+#define  DAC_CR_EN1                          ((uint32_t)0x00000001)        /*!< DAC channel1 enable */
+#define  DAC_CR_BOFF1                        ((uint32_t)0x00000002)        /*!< DAC channel1 output buffer disable */
+#define  DAC_CR_TEN1                         ((uint32_t)0x00000004)        /*!< DAC channel1 Trigger enable */
+
+#define  DAC_CR_TSEL1                        ((uint32_t)0x00000038)        /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define  DAC_CR_TSEL1_0                      ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  DAC_CR_TSEL1_1                      ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  DAC_CR_TSEL1_2                      ((uint32_t)0x00000020)        /*!< Bit 2 */
+
+#define  DAC_CR_WAVE1                        ((uint32_t)0x000000C0)        /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE1_0                      ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  DAC_CR_WAVE1_1                      ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  DAC_CR_MAMP1                        ((uint32_t)0x00000F00)        /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP1_0                      ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  DAC_CR_MAMP1_1                      ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  DAC_CR_MAMP1_2                      ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  DAC_CR_MAMP1_3                      ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  DAC_CR_DMAEN1                       ((uint32_t)0x00001000)        /*!< DAC channel1 DMA enable */
+#define  DAC_CR_EN2                          ((uint32_t)0x00010000)        /*!< DAC channel2 enable */
+#define  DAC_CR_BOFF2                        ((uint32_t)0x00020000)        /*!< DAC channel2 output buffer disable */
+#define  DAC_CR_TEN2                         ((uint32_t)0x00040000)        /*!< DAC channel2 Trigger enable */
+
+#define  DAC_CR_TSEL2                        ((uint32_t)0x00380000)        /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define  DAC_CR_TSEL2_0                      ((uint32_t)0x00080000)        /*!< Bit 0 */
+#define  DAC_CR_TSEL2_1                      ((uint32_t)0x00100000)        /*!< Bit 1 */
+#define  DAC_CR_TSEL2_2                      ((uint32_t)0x00200000)        /*!< Bit 2 */
+
+#define  DAC_CR_WAVE2                        ((uint32_t)0x00C00000)        /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE2_0                      ((uint32_t)0x00400000)        /*!< Bit 0 */
+#define  DAC_CR_WAVE2_1                      ((uint32_t)0x00800000)        /*!< Bit 1 */
+
+#define  DAC_CR_MAMP2                        ((uint32_t)0x0F000000)        /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP2_0                      ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  DAC_CR_MAMP2_1                      ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  DAC_CR_MAMP2_2                      ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  DAC_CR_MAMP2_3                      ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  DAC_CR_DMAEN2                       ((uint32_t)0x10000000)        /*!< DAC channel2 DMA enabled */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ #define  DAC_CR_DMAUDRIE1                   ((uint32_t)0x00002000)        /*!< DAC channel1 DMA underrun interrupt enable */
+ #define  DAC_CR_DMAUDRIE2                   ((uint32_t)0x20000000)        /*!< DAC channel2 DMA underrun interrupt enable */
+#endif
+
+/*****************  Bit definition for DAC_SWTRIGR register  ******************/
+#define  DAC_SWTRIGR_SWTRIG1                 ((uint8_t)0x01)               /*!< DAC channel1 software trigger */
+#define  DAC_SWTRIGR_SWTRIG2                 ((uint8_t)0x02)               /*!< DAC channel2 software trigger */
+
+/*****************  Bit definition for DAC_DHR12R1 register  ******************/
+#define  DAC_DHR12R1_DACC1DHR                ((uint16_t)0x0FFF)            /*!< DAC channel1 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L1 register  ******************/
+#define  DAC_DHR12L1_DACC1DHR                ((uint16_t)0xFFF0)            /*!< DAC channel1 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R1 register  ******************/
+#define  DAC_DHR8R1_DACC1DHR                 ((uint8_t)0xFF)               /*!< DAC channel1 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12R2 register  ******************/
+#define  DAC_DHR12R2_DACC2DHR                ((uint16_t)0x0FFF)            /*!< DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L2 register  ******************/
+#define  DAC_DHR12L2_DACC2DHR                ((uint16_t)0xFFF0)            /*!< DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R2 register  ******************/
+#define  DAC_DHR8R2_DACC2DHR                 ((uint8_t)0xFF)               /*!< DAC channel2 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12RD register  ******************/
+#define  DAC_DHR12RD_DACC1DHR                ((uint32_t)0x00000FFF)        /*!< DAC channel1 12-bit Right aligned data */
+#define  DAC_DHR12RD_DACC2DHR                ((uint32_t)0x0FFF0000)        /*!< DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12LD register  ******************/
+#define  DAC_DHR12LD_DACC1DHR                ((uint32_t)0x0000FFF0)        /*!< DAC channel1 12-bit Left aligned data */
+#define  DAC_DHR12LD_DACC2DHR                ((uint32_t)0xFFF00000)        /*!< DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8RD register  ******************/
+#define  DAC_DHR8RD_DACC1DHR                 ((uint16_t)0x00FF)            /*!< DAC channel1 8-bit Right aligned data */
+#define  DAC_DHR8RD_DACC2DHR                 ((uint16_t)0xFF00)            /*!< DAC channel2 8-bit Right aligned data */
+
+/*******************  Bit definition for DAC_DOR1 register  *******************/
+#define  DAC_DOR1_DACC1DOR                   ((uint16_t)0x0FFF)            /*!< DAC channel1 data output */
+
+/*******************  Bit definition for DAC_DOR2 register  *******************/
+#define  DAC_DOR2_DACC2DOR                   ((uint16_t)0x0FFF)            /*!< DAC channel2 data output */
+
+/********************  Bit definition for DAC_SR register  ********************/
+#define  DAC_SR_DMAUDR1                      ((uint32_t)0x00002000)        /*!< DAC channel1 DMA underrun flag */
+#define  DAC_SR_DMAUDR2                      ((uint32_t)0x20000000)        /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    CEC                                     */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for CEC_CFGR register  ******************/
+#define  CEC_CFGR_PE              ((uint16_t)0x0001)     /*!<  Peripheral Enable */
+#define  CEC_CFGR_IE              ((uint16_t)0x0002)     /*!<  Interrupt Enable */
+#define  CEC_CFGR_BTEM            ((uint16_t)0x0004)     /*!<  Bit Timing Error Mode */
+#define  CEC_CFGR_BPEM            ((uint16_t)0x0008)     /*!<  Bit Period Error Mode */
+
+/********************  Bit definition for CEC_OAR register  ******************/
+#define  CEC_OAR_OA               ((uint16_t)0x000F)     /*!<  OA[3:0]: Own Address */
+#define  CEC_OAR_OA_0             ((uint16_t)0x0001)     /*!<  Bit 0 */
+#define  CEC_OAR_OA_1             ((uint16_t)0x0002)     /*!<  Bit 1 */
+#define  CEC_OAR_OA_2             ((uint16_t)0x0004)     /*!<  Bit 2 */
+#define  CEC_OAR_OA_3             ((uint16_t)0x0008)     /*!<  Bit 3 */
+
+/********************  Bit definition for CEC_PRES register  ******************/
+#define  CEC_PRES_PRES            ((uint16_t)0x3FFF)   /*!<  Prescaler Counter Value */
+
+/********************  Bit definition for CEC_ESR register  ******************/
+#define  CEC_ESR_BTE              ((uint16_t)0x0001)     /*!<  Bit Timing Error */
+#define  CEC_ESR_BPE              ((uint16_t)0x0002)     /*!<  Bit Period Error */
+#define  CEC_ESR_RBTFE            ((uint16_t)0x0004)     /*!<  Rx Block Transfer Finished Error */
+#define  CEC_ESR_SBE              ((uint16_t)0x0008)     /*!<  Start Bit Error */
+#define  CEC_ESR_ACKE             ((uint16_t)0x0010)     /*!<  Block Acknowledge Error */
+#define  CEC_ESR_LINE             ((uint16_t)0x0020)     /*!<  Line Error */
+#define  CEC_ESR_TBTFE            ((uint16_t)0x0040)     /*!<  Tx Block Transfer Finished Error */
+
+/********************  Bit definition for CEC_CSR register  ******************/
+#define  CEC_CSR_TSOM             ((uint16_t)0x0001)     /*!<  Tx Start Of Message */
+#define  CEC_CSR_TEOM             ((uint16_t)0x0002)     /*!<  Tx End Of Message */
+#define  CEC_CSR_TERR             ((uint16_t)0x0004)     /*!<  Tx Error */
+#define  CEC_CSR_TBTRF            ((uint16_t)0x0008)     /*!<  Tx Byte Transfer Request or Block Transfer Finished */
+#define  CEC_CSR_RSOM             ((uint16_t)0x0010)     /*!<  Rx Start Of Message */
+#define  CEC_CSR_REOM             ((uint16_t)0x0020)     /*!<  Rx End Of Message */
+#define  CEC_CSR_RERR             ((uint16_t)0x0040)     /*!<  Rx Error */
+#define  CEC_CSR_RBTF             ((uint16_t)0x0080)     /*!<  Rx Block Transfer Finished */
+
+/********************  Bit definition for CEC_TXD register  ******************/
+#define  CEC_TXD_TXD              ((uint16_t)0x00FF)     /*!<  Tx Data register */
+
+/********************  Bit definition for CEC_RXD register  ******************/
+#define  CEC_RXD_RXD              ((uint16_t)0x00FF)     /*!<  Rx Data register */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    TIM                                     */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for TIM_CR1 register  ********************/
+#define  TIM_CR1_CEN                         ((uint16_t)0x0001)            /*!< Counter enable */
+#define  TIM_CR1_UDIS                        ((uint16_t)0x0002)            /*!< Update disable */
+#define  TIM_CR1_URS                         ((uint16_t)0x0004)            /*!< Update request source */
+#define  TIM_CR1_OPM                         ((uint16_t)0x0008)            /*!< One pulse mode */
+#define  TIM_CR1_DIR                         ((uint16_t)0x0010)            /*!< Direction */
+
+#define  TIM_CR1_CMS                         ((uint16_t)0x0060)            /*!< CMS[1:0] bits (Center-aligned mode selection) */
+#define  TIM_CR1_CMS_0                       ((uint16_t)0x0020)            /*!< Bit 0 */
+#define  TIM_CR1_CMS_1                       ((uint16_t)0x0040)            /*!< Bit 1 */
+
+#define  TIM_CR1_ARPE                        ((uint16_t)0x0080)            /*!< Auto-reload preload enable */
+
+#define  TIM_CR1_CKD                         ((uint16_t)0x0300)            /*!< CKD[1:0] bits (clock division) */
+#define  TIM_CR1_CKD_0                       ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_CR1_CKD_1                       ((uint16_t)0x0200)            /*!< Bit 1 */
+
+/*******************  Bit definition for TIM_CR2 register  ********************/
+#define  TIM_CR2_CCPC                        ((uint16_t)0x0001)            /*!< Capture/Compare Preloaded Control */
+#define  TIM_CR2_CCUS                        ((uint16_t)0x0004)            /*!< Capture/Compare Control Update Selection */
+#define  TIM_CR2_CCDS                        ((uint16_t)0x0008)            /*!< Capture/Compare DMA Selection */
+
+#define  TIM_CR2_MMS                         ((uint16_t)0x0070)            /*!< MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS_0                       ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CR2_MMS_1                       ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CR2_MMS_2                       ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_CR2_TI1S                        ((uint16_t)0x0080)            /*!< TI1 Selection */
+#define  TIM_CR2_OIS1                        ((uint16_t)0x0100)            /*!< Output Idle state 1 (OC1 output) */
+#define  TIM_CR2_OIS1N                       ((uint16_t)0x0200)            /*!< Output Idle state 1 (OC1N output) */
+#define  TIM_CR2_OIS2                        ((uint16_t)0x0400)            /*!< Output Idle state 2 (OC2 output) */
+#define  TIM_CR2_OIS2N                       ((uint16_t)0x0800)            /*!< Output Idle state 2 (OC2N output) */
+#define  TIM_CR2_OIS3                        ((uint16_t)0x1000)            /*!< Output Idle state 3 (OC3 output) */
+#define  TIM_CR2_OIS3N                       ((uint16_t)0x2000)            /*!< Output Idle state 3 (OC3N output) */
+#define  TIM_CR2_OIS4                        ((uint16_t)0x4000)            /*!< Output Idle state 4 (OC4 output) */
+
+/*******************  Bit definition for TIM_SMCR register  *******************/
+#define  TIM_SMCR_SMS                        ((uint16_t)0x0007)            /*!< SMS[2:0] bits (Slave mode selection) */
+#define  TIM_SMCR_SMS_0                      ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_SMCR_SMS_1                      ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  TIM_SMCR_SMS_2                      ((uint16_t)0x0004)            /*!< Bit 2 */
+
+#define  TIM_SMCR_TS                         ((uint16_t)0x0070)            /*!< TS[2:0] bits (Trigger selection) */
+#define  TIM_SMCR_TS_0                       ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_SMCR_TS_1                       ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_SMCR_TS_2                       ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_SMCR_MSM                        ((uint16_t)0x0080)            /*!< Master/slave mode */
+
+#define  TIM_SMCR_ETF                        ((uint16_t)0x0F00)            /*!< ETF[3:0] bits (External trigger filter) */
+#define  TIM_SMCR_ETF_0                      ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_SMCR_ETF_1                      ((uint16_t)0x0200)            /*!< Bit 1 */
+#define  TIM_SMCR_ETF_2                      ((uint16_t)0x0400)            /*!< Bit 2 */
+#define  TIM_SMCR_ETF_3                      ((uint16_t)0x0800)            /*!< Bit 3 */
+
+#define  TIM_SMCR_ETPS                       ((uint16_t)0x3000)            /*!< ETPS[1:0] bits (External trigger prescaler) */
+#define  TIM_SMCR_ETPS_0                     ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_SMCR_ETPS_1                     ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  TIM_SMCR_ECE                        ((uint16_t)0x4000)            /*!< External clock enable */
+#define  TIM_SMCR_ETP                        ((uint16_t)0x8000)            /*!< External trigger polarity */
+
+/*******************  Bit definition for TIM_DIER register  *******************/
+#define  TIM_DIER_UIE                        ((uint16_t)0x0001)            /*!< Update interrupt enable */
+#define  TIM_DIER_CC1IE                      ((uint16_t)0x0002)            /*!< Capture/Compare 1 interrupt enable */
+#define  TIM_DIER_CC2IE                      ((uint16_t)0x0004)            /*!< Capture/Compare 2 interrupt enable */
+#define  TIM_DIER_CC3IE                      ((uint16_t)0x0008)            /*!< Capture/Compare 3 interrupt enable */
+#define  TIM_DIER_CC4IE                      ((uint16_t)0x0010)            /*!< Capture/Compare 4 interrupt enable */
+#define  TIM_DIER_COMIE                      ((uint16_t)0x0020)            /*!< COM interrupt enable */
+#define  TIM_DIER_TIE                        ((uint16_t)0x0040)            /*!< Trigger interrupt enable */
+#define  TIM_DIER_BIE                        ((uint16_t)0x0080)            /*!< Break interrupt enable */
+#define  TIM_DIER_UDE                        ((uint16_t)0x0100)            /*!< Update DMA request enable */
+#define  TIM_DIER_CC1DE                      ((uint16_t)0x0200)            /*!< Capture/Compare 1 DMA request enable */
+#define  TIM_DIER_CC2DE                      ((uint16_t)0x0400)            /*!< Capture/Compare 2 DMA request enable */
+#define  TIM_DIER_CC3DE                      ((uint16_t)0x0800)            /*!< Capture/Compare 3 DMA request enable */
+#define  TIM_DIER_CC4DE                      ((uint16_t)0x1000)            /*!< Capture/Compare 4 DMA request enable */
+#define  TIM_DIER_COMDE                      ((uint16_t)0x2000)            /*!< COM DMA request enable */
+#define  TIM_DIER_TDE                        ((uint16_t)0x4000)            /*!< Trigger DMA request enable */
+
+/********************  Bit definition for TIM_SR register  ********************/
+#define  TIM_SR_UIF                          ((uint16_t)0x0001)            /*!< Update interrupt Flag */
+#define  TIM_SR_CC1IF                        ((uint16_t)0x0002)            /*!< Capture/Compare 1 interrupt Flag */
+#define  TIM_SR_CC2IF                        ((uint16_t)0x0004)            /*!< Capture/Compare 2 interrupt Flag */
+#define  TIM_SR_CC3IF                        ((uint16_t)0x0008)            /*!< Capture/Compare 3 interrupt Flag */
+#define  TIM_SR_CC4IF                        ((uint16_t)0x0010)            /*!< Capture/Compare 4 interrupt Flag */
+#define  TIM_SR_COMIF                        ((uint16_t)0x0020)            /*!< COM interrupt Flag */
+#define  TIM_SR_TIF                          ((uint16_t)0x0040)            /*!< Trigger interrupt Flag */
+#define  TIM_SR_BIF                          ((uint16_t)0x0080)            /*!< Break interrupt Flag */
+#define  TIM_SR_CC1OF                        ((uint16_t)0x0200)            /*!< Capture/Compare 1 Overcapture Flag */
+#define  TIM_SR_CC2OF                        ((uint16_t)0x0400)            /*!< Capture/Compare 2 Overcapture Flag */
+#define  TIM_SR_CC3OF                        ((uint16_t)0x0800)            /*!< Capture/Compare 3 Overcapture Flag */
+#define  TIM_SR_CC4OF                        ((uint16_t)0x1000)            /*!< Capture/Compare 4 Overcapture Flag */
+
+/*******************  Bit definition for TIM_EGR register  ********************/
+#define  TIM_EGR_UG                          ((uint8_t)0x01)               /*!< Update Generation */
+#define  TIM_EGR_CC1G                        ((uint8_t)0x02)               /*!< Capture/Compare 1 Generation */
+#define  TIM_EGR_CC2G                        ((uint8_t)0x04)               /*!< Capture/Compare 2 Generation */
+#define  TIM_EGR_CC3G                        ((uint8_t)0x08)               /*!< Capture/Compare 3 Generation */
+#define  TIM_EGR_CC4G                        ((uint8_t)0x10)               /*!< Capture/Compare 4 Generation */
+#define  TIM_EGR_COMG                        ((uint8_t)0x20)               /*!< Capture/Compare Control Update Generation */
+#define  TIM_EGR_TG                          ((uint8_t)0x40)               /*!< Trigger Generation */
+#define  TIM_EGR_BG                          ((uint8_t)0x80)               /*!< Break Generation */
+
+/******************  Bit definition for TIM_CCMR1 register  *******************/
+#define  TIM_CCMR1_CC1S                      ((uint16_t)0x0003)            /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define  TIM_CCMR1_CC1S_0                    ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_CCMR1_CC1S_1                    ((uint16_t)0x0002)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_OC1FE                     ((uint16_t)0x0004)            /*!< Output Compare 1 Fast enable */
+#define  TIM_CCMR1_OC1PE                     ((uint16_t)0x0008)            /*!< Output Compare 1 Preload enable */
+
+#define  TIM_CCMR1_OC1M                      ((uint16_t)0x0070)            /*!< OC1M[2:0] bits (Output Compare 1 Mode) */
+#define  TIM_CCMR1_OC1M_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR1_OC1M_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR1_OC1M_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_CCMR1_OC1CE                     ((uint16_t)0x0080)            /*!< Output Compare 1Clear Enable */
+
+#define  TIM_CCMR1_CC2S                      ((uint16_t)0x0300)            /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define  TIM_CCMR1_CC2S_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_CCMR1_CC2S_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_OC2FE                     ((uint16_t)0x0400)            /*!< Output Compare 2 Fast enable */
+#define  TIM_CCMR1_OC2PE                     ((uint16_t)0x0800)            /*!< Output Compare 2 Preload enable */
+
+#define  TIM_CCMR1_OC2M                      ((uint16_t)0x7000)            /*!< OC2M[2:0] bits (Output Compare 2 Mode) */
+#define  TIM_CCMR1_OC2M_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR1_OC2M_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR1_OC2M_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+
+#define  TIM_CCMR1_OC2CE                     ((uint16_t)0x8000)            /*!< Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR1_IC1PSC                    ((uint16_t)0x000C)            /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define  TIM_CCMR1_IC1PSC_0                  ((uint16_t)0x0004)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC1PSC_1                  ((uint16_t)0x0008)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_IC1F                      ((uint16_t)0x00F0)            /*!< IC1F[3:0] bits (Input Capture 1 Filter) */
+#define  TIM_CCMR1_IC1F_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC1F_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR1_IC1F_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+#define  TIM_CCMR1_IC1F_3                    ((uint16_t)0x0080)            /*!< Bit 3 */
+
+#define  TIM_CCMR1_IC2PSC                    ((uint16_t)0x0C00)            /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define  TIM_CCMR1_IC2PSC_0                  ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC2PSC_1                  ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_IC2F                      ((uint16_t)0xF000)            /*!< IC2F[3:0] bits (Input Capture 2 Filter) */
+#define  TIM_CCMR1_IC2F_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC2F_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR1_IC2F_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+#define  TIM_CCMR1_IC2F_3                    ((uint16_t)0x8000)            /*!< Bit 3 */
+
+/******************  Bit definition for TIM_CCMR2 register  *******************/
+#define  TIM_CCMR2_CC3S                      ((uint16_t)0x0003)            /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define  TIM_CCMR2_CC3S_0                    ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_CCMR2_CC3S_1                    ((uint16_t)0x0002)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_OC3FE                     ((uint16_t)0x0004)            /*!< Output Compare 3 Fast enable */
+#define  TIM_CCMR2_OC3PE                     ((uint16_t)0x0008)            /*!< Output Compare 3 Preload enable */
+
+#define  TIM_CCMR2_OC3M                      ((uint16_t)0x0070)            /*!< OC3M[2:0] bits (Output Compare 3 Mode) */
+#define  TIM_CCMR2_OC3M_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR2_OC3M_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR2_OC3M_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_CCMR2_OC3CE                     ((uint16_t)0x0080)            /*!< Output Compare 3 Clear Enable */
+
+#define  TIM_CCMR2_CC4S                      ((uint16_t)0x0300)            /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define  TIM_CCMR2_CC4S_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_CCMR2_CC4S_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_OC4FE                     ((uint16_t)0x0400)            /*!< Output Compare 4 Fast enable */
+#define  TIM_CCMR2_OC4PE                     ((uint16_t)0x0800)            /*!< Output Compare 4 Preload enable */
+
+#define  TIM_CCMR2_OC4M                      ((uint16_t)0x7000)            /*!< OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR2_OC4M_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR2_OC4M_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR2_OC4M_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+
+#define  TIM_CCMR2_OC4CE                     ((uint16_t)0x8000)            /*!< Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR2_IC3PSC                    ((uint16_t)0x000C)            /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define  TIM_CCMR2_IC3PSC_0                  ((uint16_t)0x0004)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC3PSC_1                  ((uint16_t)0x0008)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_IC3F                      ((uint16_t)0x00F0)            /*!< IC3F[3:0] bits (Input Capture 3 Filter) */
+#define  TIM_CCMR2_IC3F_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC3F_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR2_IC3F_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+#define  TIM_CCMR2_IC3F_3                    ((uint16_t)0x0080)            /*!< Bit 3 */
+
+#define  TIM_CCMR2_IC4PSC                    ((uint16_t)0x0C00)            /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define  TIM_CCMR2_IC4PSC_0                  ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC4PSC_1                  ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_IC4F                      ((uint16_t)0xF000)            /*!< IC4F[3:0] bits (Input Capture 4 Filter) */
+#define  TIM_CCMR2_IC4F_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC4F_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR2_IC4F_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+#define  TIM_CCMR2_IC4F_3                    ((uint16_t)0x8000)            /*!< Bit 3 */
+
+/*******************  Bit definition for TIM_CCER register  *******************/
+#define  TIM_CCER_CC1E                       ((uint16_t)0x0001)            /*!< Capture/Compare 1 output enable */
+#define  TIM_CCER_CC1P                       ((uint16_t)0x0002)            /*!< Capture/Compare 1 output Polarity */
+#define  TIM_CCER_CC1NE                      ((uint16_t)0x0004)            /*!< Capture/Compare 1 Complementary output enable */
+#define  TIM_CCER_CC1NP                      ((uint16_t)0x0008)            /*!< Capture/Compare 1 Complementary output Polarity */
+#define  TIM_CCER_CC2E                       ((uint16_t)0x0010)            /*!< Capture/Compare 2 output enable */
+#define  TIM_CCER_CC2P                       ((uint16_t)0x0020)            /*!< Capture/Compare 2 output Polarity */
+#define  TIM_CCER_CC2NE                      ((uint16_t)0x0040)            /*!< Capture/Compare 2 Complementary output enable */
+#define  TIM_CCER_CC2NP                      ((uint16_t)0x0080)            /*!< Capture/Compare 2 Complementary output Polarity */
+#define  TIM_CCER_CC3E                       ((uint16_t)0x0100)            /*!< Capture/Compare 3 output enable */
+#define  TIM_CCER_CC3P                       ((uint16_t)0x0200)            /*!< Capture/Compare 3 output Polarity */
+#define  TIM_CCER_CC3NE                      ((uint16_t)0x0400)            /*!< Capture/Compare 3 Complementary output enable */
+#define  TIM_CCER_CC3NP                      ((uint16_t)0x0800)            /*!< Capture/Compare 3 Complementary output Polarity */
+#define  TIM_CCER_CC4E                       ((uint16_t)0x1000)            /*!< Capture/Compare 4 output enable */
+#define  TIM_CCER_CC4P                       ((uint16_t)0x2000)            /*!< Capture/Compare 4 output Polarity */
+#define  TIM_CCER_CC4NP                      ((uint16_t)0x8000)            /*!< Capture/Compare 4 Complementary output Polarity */
+
+/*******************  Bit definition for TIM_CNT register  ********************/
+#define  TIM_CNT_CNT                         ((uint16_t)0xFFFF)            /*!< Counter Value */
+
+/*******************  Bit definition for TIM_PSC register  ********************/
+#define  TIM_PSC_PSC                         ((uint16_t)0xFFFF)            /*!< Prescaler Value */
+
+/*******************  Bit definition for TIM_ARR register  ********************/
+#define  TIM_ARR_ARR                         ((uint16_t)0xFFFF)            /*!< actual auto-reload Value */
+
+/*******************  Bit definition for TIM_RCR register  ********************/
+#define  TIM_RCR_REP                         ((uint8_t)0xFF)               /*!< Repetition Counter Value */
+
+/*******************  Bit definition for TIM_CCR1 register  *******************/
+#define  TIM_CCR1_CCR1                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 1 Value */
+
+/*******************  Bit definition for TIM_CCR2 register  *******************/
+#define  TIM_CCR2_CCR2                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 2 Value */
+
+/*******************  Bit definition for TIM_CCR3 register  *******************/
+#define  TIM_CCR3_CCR3                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 3 Value */
+
+/*******************  Bit definition for TIM_CCR4 register  *******************/
+#define  TIM_CCR4_CCR4                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 4 Value */
+
+/*******************  Bit definition for TIM_BDTR register  *******************/
+#define  TIM_BDTR_DTG                        ((uint16_t)0x00FF)            /*!< DTG[0:7] bits (Dead-Time Generator set-up) */
+#define  TIM_BDTR_DTG_0                      ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_BDTR_DTG_1                      ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  TIM_BDTR_DTG_2                      ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  TIM_BDTR_DTG_3                      ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  TIM_BDTR_DTG_4                      ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  TIM_BDTR_DTG_5                      ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  TIM_BDTR_DTG_6                      ((uint16_t)0x0040)            /*!< Bit 6 */
+#define  TIM_BDTR_DTG_7                      ((uint16_t)0x0080)            /*!< Bit 7 */
+
+#define  TIM_BDTR_LOCK                       ((uint16_t)0x0300)            /*!< LOCK[1:0] bits (Lock Configuration) */
+#define  TIM_BDTR_LOCK_0                     ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_BDTR_LOCK_1                     ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  TIM_BDTR_OSSI                       ((uint16_t)0x0400)            /*!< Off-State Selection for Idle mode */
+#define  TIM_BDTR_OSSR                       ((uint16_t)0x0800)            /*!< Off-State Selection for Run mode */
+#define  TIM_BDTR_BKE                        ((uint16_t)0x1000)            /*!< Break enable */
+#define  TIM_BDTR_BKP                        ((uint16_t)0x2000)            /*!< Break Polarity */
+#define  TIM_BDTR_AOE                        ((uint16_t)0x4000)            /*!< Automatic Output enable */
+#define  TIM_BDTR_MOE                        ((uint16_t)0x8000)            /*!< Main Output enable */
+
+/*******************  Bit definition for TIM_DCR register  ********************/
+#define  TIM_DCR_DBA                         ((uint16_t)0x001F)            /*!< DBA[4:0] bits (DMA Base Address) */
+#define  TIM_DCR_DBA_0                       ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_DCR_DBA_1                       ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  TIM_DCR_DBA_2                       ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  TIM_DCR_DBA_3                       ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  TIM_DCR_DBA_4                       ((uint16_t)0x0010)            /*!< Bit 4 */
+
+#define  TIM_DCR_DBL                         ((uint16_t)0x1F00)            /*!< DBL[4:0] bits (DMA Burst Length) */
+#define  TIM_DCR_DBL_0                       ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_DCR_DBL_1                       ((uint16_t)0x0200)            /*!< Bit 1 */
+#define  TIM_DCR_DBL_2                       ((uint16_t)0x0400)            /*!< Bit 2 */
+#define  TIM_DCR_DBL_3                       ((uint16_t)0x0800)            /*!< Bit 3 */
+#define  TIM_DCR_DBL_4                       ((uint16_t)0x1000)            /*!< Bit 4 */
+
+/*******************  Bit definition for TIM_DMAR register  *******************/
+#define  TIM_DMAR_DMAB                       ((uint16_t)0xFFFF)            /*!< DMA register for burst accesses */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Real-Time Clock                                */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for RTC_CRH register  ********************/
+#define  RTC_CRH_SECIE                       ((uint8_t)0x01)               /*!< Second Interrupt Enable */
+#define  RTC_CRH_ALRIE                       ((uint8_t)0x02)               /*!< Alarm Interrupt Enable */
+#define  RTC_CRH_OWIE                        ((uint8_t)0x04)               /*!< OverfloW Interrupt Enable */
+
+/*******************  Bit definition for RTC_CRL register  ********************/
+#define  RTC_CRL_SECF                        ((uint8_t)0x01)               /*!< Second Flag */
+#define  RTC_CRL_ALRF                        ((uint8_t)0x02)               /*!< Alarm Flag */
+#define  RTC_CRL_OWF                         ((uint8_t)0x04)               /*!< OverfloW Flag */
+#define  RTC_CRL_RSF                         ((uint8_t)0x08)               /*!< Registers Synchronized Flag */
+#define  RTC_CRL_CNF                         ((uint8_t)0x10)               /*!< Configuration Flag */
+#define  RTC_CRL_RTOFF                       ((uint8_t)0x20)               /*!< RTC operation OFF */
+
+/*******************  Bit definition for RTC_PRLH register  *******************/
+#define  RTC_PRLH_PRL                        ((uint16_t)0x000F)            /*!< RTC Prescaler Reload Value High */
+
+/*******************  Bit definition for RTC_PRLL register  *******************/
+#define  RTC_PRLL_PRL                        ((uint16_t)0xFFFF)            /*!< RTC Prescaler Reload Value Low */
+
+/*******************  Bit definition for RTC_DIVH register  *******************/
+#define  RTC_DIVH_RTC_DIV                    ((uint16_t)0x000F)            /*!< RTC Clock Divider High */
+
+/*******************  Bit definition for RTC_DIVL register  *******************/
+#define  RTC_DIVL_RTC_DIV                    ((uint16_t)0xFFFF)            /*!< RTC Clock Divider Low */
+
+/*******************  Bit definition for RTC_CNTH register  *******************/
+#define  RTC_CNTH_RTC_CNT                    ((uint16_t)0xFFFF)            /*!< RTC Counter High */
+
+/*******************  Bit definition for RTC_CNTL register  *******************/
+#define  RTC_CNTL_RTC_CNT                    ((uint16_t)0xFFFF)            /*!< RTC Counter Low */
+
+/*******************  Bit definition for RTC_ALRH register  *******************/
+#define  RTC_ALRH_RTC_ALR                    ((uint16_t)0xFFFF)            /*!< RTC Alarm High */
+
+/*******************  Bit definition for RTC_ALRL register  *******************/
+#define  RTC_ALRL_RTC_ALR                    ((uint16_t)0xFFFF)            /*!< RTC Alarm Low */
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Independent WATCHDOG                             */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_KR_KEY                         ((uint16_t)0xFFFF)            /*!< Key value (write only, read 0000h) */
+
+/*******************  Bit definition for IWDG_PR register  ********************/
+#define  IWDG_PR_PR                          ((uint8_t)0x07)               /*!< PR[2:0] (Prescaler divider) */
+#define  IWDG_PR_PR_0                        ((uint8_t)0x01)               /*!< Bit 0 */
+#define  IWDG_PR_PR_1                        ((uint8_t)0x02)               /*!< Bit 1 */
+#define  IWDG_PR_PR_2                        ((uint8_t)0x04)               /*!< Bit 2 */
+
+/*******************  Bit definition for IWDG_RLR register  *******************/
+#define  IWDG_RLR_RL                         ((uint16_t)0x0FFF)            /*!< Watchdog counter reload value */
+
+/*******************  Bit definition for IWDG_SR register  ********************/
+#define  IWDG_SR_PVU                         ((uint8_t)0x01)               /*!< Watchdog prescaler value update */
+#define  IWDG_SR_RVU                         ((uint8_t)0x02)               /*!< Watchdog counter reload value update */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Window WATCHDOG                                 */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for WWDG_CR register  ********************/
+#define  WWDG_CR_T                           ((uint8_t)0x7F)               /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define  WWDG_CR_T0                          ((uint8_t)0x01)               /*!< Bit 0 */
+#define  WWDG_CR_T1                          ((uint8_t)0x02)               /*!< Bit 1 */
+#define  WWDG_CR_T2                          ((uint8_t)0x04)               /*!< Bit 2 */
+#define  WWDG_CR_T3                          ((uint8_t)0x08)               /*!< Bit 3 */
+#define  WWDG_CR_T4                          ((uint8_t)0x10)               /*!< Bit 4 */
+#define  WWDG_CR_T5                          ((uint8_t)0x20)               /*!< Bit 5 */
+#define  WWDG_CR_T6                          ((uint8_t)0x40)               /*!< Bit 6 */
+
+#define  WWDG_CR_WDGA                        ((uint8_t)0x80)               /*!< Activation bit */
+
+/*******************  Bit definition for WWDG_CFR register  *******************/
+#define  WWDG_CFR_W                          ((uint16_t)0x007F)            /*!< W[6:0] bits (7-bit window value) */
+#define  WWDG_CFR_W0                         ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  WWDG_CFR_W1                         ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  WWDG_CFR_W2                         ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  WWDG_CFR_W3                         ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  WWDG_CFR_W4                         ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  WWDG_CFR_W5                         ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  WWDG_CFR_W6                         ((uint16_t)0x0040)            /*!< Bit 6 */
+
+#define  WWDG_CFR_WDGTB                      ((uint16_t)0x0180)            /*!< WDGTB[1:0] bits (Timer Base) */
+#define  WWDG_CFR_WDGTB0                     ((uint16_t)0x0080)            /*!< Bit 0 */
+#define  WWDG_CFR_WDGTB1                     ((uint16_t)0x0100)            /*!< Bit 1 */
+
+#define  WWDG_CFR_EWI                        ((uint16_t)0x0200)            /*!< Early Wakeup Interrupt */
+
+/*******************  Bit definition for WWDG_SR register  ********************/
+#define  WWDG_SR_EWIF                        ((uint8_t)0x01)               /*!< Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                       Flexible Static Memory Controller                    */
+/*                                                                            */
+/******************************************************************************/
+
+/******************  Bit definition for FSMC_BCR1 register  *******************/
+#define  FSMC_BCR1_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR1_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR1_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR1_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR1_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR1_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR1_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR1_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR1_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR1_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR1_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit */
+#define  FSMC_BCR1_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR1_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR1_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR1_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR1_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR1_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR1_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BCR2 register  *******************/
+#define  FSMC_BCR2_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR2_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR2_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR2_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR2_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR2_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR2_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR2_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR2_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR2_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR2_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit */
+#define  FSMC_BCR2_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR2_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR2_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR2_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR2_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR2_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR2_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BCR3 register  *******************/
+#define  FSMC_BCR3_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR3_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR3_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR3_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR3_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR3_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR3_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR3_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR3_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR3_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR3_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit. */
+#define  FSMC_BCR3_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR3_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR3_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR3_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR3_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR3_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR3_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BCR4 register  *******************/
+#define  FSMC_BCR4_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR4_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR4_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR4_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR4_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR4_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR4_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR4_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR4_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR4_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR4_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit */
+#define  FSMC_BCR4_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR4_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR4_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR4_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR4_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR4_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR4_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BTR1 register  ******************/
+#define  FSMC_BTR1_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR1_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR1_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR1_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR1_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR1_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR1_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR1_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR1_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR1_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR1_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR1_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR1_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BTR1_DATAST_4                  ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BTR1_DATAST_5                  ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BTR1_DATAST_6                  ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BTR1_DATAST_7                  ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BTR1_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR1_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR1_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR1_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR1_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR1_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR1_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR1_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR1_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR1_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR1_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR1_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR1_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR1_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR1_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BTR2 register  *******************/
+#define  FSMC_BTR2_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR2_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR2_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR2_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR2_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR2_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR2_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR2_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR2_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR2_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR2_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR2_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR2_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BTR2_DATAST_4                  ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BTR2_DATAST_5                  ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BTR2_DATAST_6                  ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BTR2_DATAST_7                  ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BTR2_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR2_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR2_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR2_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR2_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR2_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR2_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR2_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR2_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR2_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR2_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR2_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR2_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR2_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR2_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/*******************  Bit definition for FSMC_BTR3 register  *******************/
+#define  FSMC_BTR3_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR3_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR3_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR3_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR3_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR3_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR3_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR3_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR3_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR3_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR3_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR3_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR3_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BTR3_DATAST_4                  ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BTR3_DATAST_5                  ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BTR3_DATAST_6                  ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BTR3_DATAST_7                  ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BTR3_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR3_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR3_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR3_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR3_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR3_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR3_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR3_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR3_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR3_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR3_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR3_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR3_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR3_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR3_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BTR4 register  *******************/
+#define  FSMC_BTR4_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR4_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR4_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR4_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR4_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR4_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR4_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR4_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR4_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR4_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR4_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR4_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR4_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BTR4_DATAST_4                  ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BTR4_DATAST_5                  ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BTR4_DATAST_6                  ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BTR4_DATAST_7                  ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BTR4_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR4_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR4_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR4_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR4_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR4_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR4_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR4_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR4_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR4_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR4_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR4_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR4_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR4_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR4_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR1 register  ******************/
+#define  FSMC_BWTR1_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR1_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR1_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR1_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR1_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR1_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR1_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR1_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR1_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR1_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR1_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR1_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR1_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BWTR1_DATAST_4                 ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BWTR1_DATAST_5                 ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BWTR1_DATAST_6                 ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BWTR1_DATAST_7                 ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BWTR1_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR1_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR1_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BWTR1_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR1_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR1_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR1_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR1_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR1_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR1_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR1_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR2 register  ******************/
+#define  FSMC_BWTR2_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR2_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR2_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR2_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR2_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR2_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR2_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR2_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR2_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR2_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR2_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR2_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR2_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BWTR2_DATAST_4                 ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BWTR2_DATAST_5                 ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BWTR2_DATAST_6                 ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BWTR2_DATAST_7                 ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BWTR2_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR2_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR2_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1*/
+#define  FSMC_BWTR2_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR2_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR2_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR2_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR2_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR2_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR2_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR2_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR3 register  ******************/
+#define  FSMC_BWTR3_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR3_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR3_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR3_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR3_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR3_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR3_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR3_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR3_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR3_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR3_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR3_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR3_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BWTR3_DATAST_4                 ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BWTR3_DATAST_5                 ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BWTR3_DATAST_6                 ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BWTR3_DATAST_7                 ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BWTR3_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR3_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR3_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BWTR3_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR3_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR3_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR3_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR3_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR3_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR3_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR3_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR4 register  ******************/
+#define  FSMC_BWTR4_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR4_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR4_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR4_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR4_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR4_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR4_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR4_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR4_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR4_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR4_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR4_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR4_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_BWTR4_DATAST_4                 ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_BWTR4_DATAST_5                 ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_BWTR4_DATAST_6                 ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_BWTR4_DATAST_7                 ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_BWTR4_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR4_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR4_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BWTR4_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR4_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR4_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR4_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR4_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR4_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR4_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR4_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_PCR2 register  *******************/
+#define  FSMC_PCR2_PWAITEN                   ((uint32_t)0x00000002)        /*!< Wait feature enable bit */
+#define  FSMC_PCR2_PBKEN                     ((uint32_t)0x00000004)        /*!< PC Card/NAND Flash memory bank enable bit */
+#define  FSMC_PCR2_PTYP                      ((uint32_t)0x00000008)        /*!< Memory type */
+
+#define  FSMC_PCR2_PWID                      ((uint32_t)0x00000030)        /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define  FSMC_PCR2_PWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_PCR2_PWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_PCR2_ECCEN                     ((uint32_t)0x00000040)        /*!< ECC computation logic enable bit */
+
+#define  FSMC_PCR2_TCLR                      ((uint32_t)0x00001E00)        /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define  FSMC_PCR2_TCLR_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  FSMC_PCR2_TCLR_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  FSMC_PCR2_TCLR_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+#define  FSMC_PCR2_TCLR_3                    ((uint32_t)0x00001000)        /*!< Bit 3 */
+
+#define  FSMC_PCR2_TAR                       ((uint32_t)0x0001E000)        /*!< TAR[3:0] bits (ALE to RE delay) */
+#define  FSMC_PCR2_TAR_0                     ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  FSMC_PCR2_TAR_1                     ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  FSMC_PCR2_TAR_2                     ((uint32_t)0x00008000)        /*!< Bit 2 */
+#define  FSMC_PCR2_TAR_3                     ((uint32_t)0x00010000)        /*!< Bit 3 */
+
+#define  FSMC_PCR2_ECCPS                     ((uint32_t)0x000E0000)        /*!< ECCPS[1:0] bits (ECC page size) */
+#define  FSMC_PCR2_ECCPS_0                   ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  FSMC_PCR2_ECCPS_1                   ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  FSMC_PCR2_ECCPS_2                   ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+/******************  Bit definition for FSMC_PCR3 register  *******************/
+#define  FSMC_PCR3_PWAITEN                   ((uint32_t)0x00000002)        /*!< Wait feature enable bit */
+#define  FSMC_PCR3_PBKEN                     ((uint32_t)0x00000004)        /*!< PC Card/NAND Flash memory bank enable bit */
+#define  FSMC_PCR3_PTYP                      ((uint32_t)0x00000008)        /*!< Memory type */
+
+#define  FSMC_PCR3_PWID                      ((uint32_t)0x00000030)        /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define  FSMC_PCR3_PWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_PCR3_PWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_PCR3_ECCEN                     ((uint32_t)0x00000040)        /*!< ECC computation logic enable bit */
+
+#define  FSMC_PCR3_TCLR                      ((uint32_t)0x00001E00)        /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define  FSMC_PCR3_TCLR_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  FSMC_PCR3_TCLR_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  FSMC_PCR3_TCLR_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+#define  FSMC_PCR3_TCLR_3                    ((uint32_t)0x00001000)        /*!< Bit 3 */
+
+#define  FSMC_PCR3_TAR                       ((uint32_t)0x0001E000)        /*!< TAR[3:0] bits (ALE to RE delay) */
+#define  FSMC_PCR3_TAR_0                     ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  FSMC_PCR3_TAR_1                     ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  FSMC_PCR3_TAR_2                     ((uint32_t)0x00008000)        /*!< Bit 2 */
+#define  FSMC_PCR3_TAR_3                     ((uint32_t)0x00010000)        /*!< Bit 3 */
+
+#define  FSMC_PCR3_ECCPS                     ((uint32_t)0x000E0000)        /*!< ECCPS[2:0] bits (ECC page size) */
+#define  FSMC_PCR3_ECCPS_0                   ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  FSMC_PCR3_ECCPS_1                   ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  FSMC_PCR3_ECCPS_2                   ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+/******************  Bit definition for FSMC_PCR4 register  *******************/
+#define  FSMC_PCR4_PWAITEN                   ((uint32_t)0x00000002)        /*!< Wait feature enable bit */
+#define  FSMC_PCR4_PBKEN                     ((uint32_t)0x00000004)        /*!< PC Card/NAND Flash memory bank enable bit */
+#define  FSMC_PCR4_PTYP                      ((uint32_t)0x00000008)        /*!< Memory type */
+
+#define  FSMC_PCR4_PWID                      ((uint32_t)0x00000030)        /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define  FSMC_PCR4_PWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_PCR4_PWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_PCR4_ECCEN                     ((uint32_t)0x00000040)        /*!< ECC computation logic enable bit */
+
+#define  FSMC_PCR4_TCLR                      ((uint32_t)0x00001E00)        /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define  FSMC_PCR4_TCLR_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  FSMC_PCR4_TCLR_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  FSMC_PCR4_TCLR_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+#define  FSMC_PCR4_TCLR_3                    ((uint32_t)0x00001000)        /*!< Bit 3 */
+
+#define  FSMC_PCR4_TAR                       ((uint32_t)0x0001E000)        /*!< TAR[3:0] bits (ALE to RE delay) */
+#define  FSMC_PCR4_TAR_0                     ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  FSMC_PCR4_TAR_1                     ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  FSMC_PCR4_TAR_2                     ((uint32_t)0x00008000)        /*!< Bit 2 */
+#define  FSMC_PCR4_TAR_3                     ((uint32_t)0x00010000)        /*!< Bit 3 */
+
+#define  FSMC_PCR4_ECCPS                     ((uint32_t)0x000E0000)        /*!< ECCPS[2:0] bits (ECC page size) */
+#define  FSMC_PCR4_ECCPS_0                   ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  FSMC_PCR4_ECCPS_1                   ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  FSMC_PCR4_ECCPS_2                   ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+/*******************  Bit definition for FSMC_SR2 register  *******************/
+#define  FSMC_SR2_IRS                        ((uint8_t)0x01)               /*!< Interrupt Rising Edge status */
+#define  FSMC_SR2_ILS                        ((uint8_t)0x02)               /*!< Interrupt Level status */
+#define  FSMC_SR2_IFS                        ((uint8_t)0x04)               /*!< Interrupt Falling Edge status */
+#define  FSMC_SR2_IREN                       ((uint8_t)0x08)               /*!< Interrupt Rising Edge detection Enable bit */
+#define  FSMC_SR2_ILEN                       ((uint8_t)0x10)               /*!< Interrupt Level detection Enable bit */
+#define  FSMC_SR2_IFEN                       ((uint8_t)0x20)               /*!< Interrupt Falling Edge detection Enable bit */
+#define  FSMC_SR2_FEMPT                      ((uint8_t)0x40)               /*!< FIFO empty */
+
+/*******************  Bit definition for FSMC_SR3 register  *******************/
+#define  FSMC_SR3_IRS                        ((uint8_t)0x01)               /*!< Interrupt Rising Edge status */
+#define  FSMC_SR3_ILS                        ((uint8_t)0x02)               /*!< Interrupt Level status */
+#define  FSMC_SR3_IFS                        ((uint8_t)0x04)               /*!< Interrupt Falling Edge status */
+#define  FSMC_SR3_IREN                       ((uint8_t)0x08)               /*!< Interrupt Rising Edge detection Enable bit */
+#define  FSMC_SR3_ILEN                       ((uint8_t)0x10)               /*!< Interrupt Level detection Enable bit */
+#define  FSMC_SR3_IFEN                       ((uint8_t)0x20)               /*!< Interrupt Falling Edge detection Enable bit */
+#define  FSMC_SR3_FEMPT                      ((uint8_t)0x40)               /*!< FIFO empty */
+
+/*******************  Bit definition for FSMC_SR4 register  *******************/
+#define  FSMC_SR4_IRS                        ((uint8_t)0x01)               /*!< Interrupt Rising Edge status */
+#define  FSMC_SR4_ILS                        ((uint8_t)0x02)               /*!< Interrupt Level status */
+#define  FSMC_SR4_IFS                        ((uint8_t)0x04)               /*!< Interrupt Falling Edge status */
+#define  FSMC_SR4_IREN                       ((uint8_t)0x08)               /*!< Interrupt Rising Edge detection Enable bit */
+#define  FSMC_SR4_ILEN                       ((uint8_t)0x10)               /*!< Interrupt Level detection Enable bit */
+#define  FSMC_SR4_IFEN                       ((uint8_t)0x20)               /*!< Interrupt Falling Edge detection Enable bit */
+#define  FSMC_SR4_FEMPT                      ((uint8_t)0x40)               /*!< FIFO empty */
+
+/******************  Bit definition for FSMC_PMEM2 register  ******************/
+#define  FSMC_PMEM2_MEMSET2                  ((uint32_t)0x000000FF)        /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define  FSMC_PMEM2_MEMSET2_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMSET2_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMSET2_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMSET2_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMSET2_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMSET2_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMSET2_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMSET2_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PMEM2_MEMWAIT2                 ((uint32_t)0x0000FF00)        /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define  FSMC_PMEM2_MEMWAIT2_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMWAIT2_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMWAIT2_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMWAIT2_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMWAIT2_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMWAIT2_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMWAIT2_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMWAIT2_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM2_MEMHOLD2                 ((uint32_t)0x00FF0000)        /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define  FSMC_PMEM2_MEMHOLD2_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMHOLD2_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMHOLD2_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMHOLD2_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMHOLD2_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMHOLD2_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMHOLD2_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMHOLD2_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM2_MEMHIZ2                  ((uint32_t)0xFF000000)        /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define  FSMC_PMEM2_MEMHIZ2_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMHIZ2_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMHIZ2_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMHIZ2_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMHIZ2_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMHIZ2_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMHIZ2_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMHIZ2_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PMEM3 register  ******************/
+#define  FSMC_PMEM3_MEMSET3                  ((uint32_t)0x000000FF)        /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define  FSMC_PMEM3_MEMSET3_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMSET3_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMSET3_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMSET3_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMSET3_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMSET3_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMSET3_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMSET3_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PMEM3_MEMWAIT3                 ((uint32_t)0x0000FF00)        /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define  FSMC_PMEM3_MEMWAIT3_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMWAIT3_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMWAIT3_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMWAIT3_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMWAIT3_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMWAIT3_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMWAIT3_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMWAIT3_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM3_MEMHOLD3                 ((uint32_t)0x00FF0000)        /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define  FSMC_PMEM3_MEMHOLD3_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMHOLD3_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMHOLD3_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMHOLD3_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMHOLD3_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMHOLD3_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMHOLD3_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMHOLD3_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM3_MEMHIZ3                  ((uint32_t)0xFF000000)        /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define  FSMC_PMEM3_MEMHIZ3_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMHIZ3_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMHIZ3_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMHIZ3_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMHIZ3_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMHIZ3_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMHIZ3_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMHIZ3_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PMEM4 register  ******************/
+#define  FSMC_PMEM4_MEMSET4                  ((uint32_t)0x000000FF)        /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define  FSMC_PMEM4_MEMSET4_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMSET4_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMSET4_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMSET4_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMSET4_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMSET4_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMSET4_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMSET4_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PMEM4_MEMWAIT4                 ((uint32_t)0x0000FF00)        /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define  FSMC_PMEM4_MEMWAIT4_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMWAIT4_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMWAIT4_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMWAIT4_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMWAIT4_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMWAIT4_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMWAIT4_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMWAIT4_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM4_MEMHOLD4                 ((uint32_t)0x00FF0000)        /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define  FSMC_PMEM4_MEMHOLD4_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMHOLD4_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMHOLD4_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMHOLD4_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMHOLD4_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMHOLD4_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMHOLD4_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMHOLD4_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM4_MEMHIZ4                  ((uint32_t)0xFF000000)        /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define  FSMC_PMEM4_MEMHIZ4_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMHIZ4_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMHIZ4_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMHIZ4_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMHIZ4_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMHIZ4_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMHIZ4_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMHIZ4_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PATT2 register  ******************/
+#define  FSMC_PATT2_ATTSET2                  ((uint32_t)0x000000FF)        /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define  FSMC_PATT2_ATTSET2_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTSET2_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTSET2_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTSET2_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTSET2_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTSET2_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTSET2_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTSET2_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PATT2_ATTWAIT2                 ((uint32_t)0x0000FF00)        /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define  FSMC_PATT2_ATTWAIT2_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTWAIT2_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTWAIT2_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTWAIT2_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTWAIT2_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTWAIT2_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTWAIT2_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTWAIT2_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PATT2_ATTHOLD2                 ((uint32_t)0x00FF0000)        /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define  FSMC_PATT2_ATTHOLD2_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTHOLD2_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTHOLD2_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTHOLD2_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTHOLD2_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTHOLD2_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTHOLD2_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTHOLD2_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PATT2_ATTHIZ2                  ((uint32_t)0xFF000000)        /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define  FSMC_PATT2_ATTHIZ2_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTHIZ2_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTHIZ2_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTHIZ2_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTHIZ2_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTHIZ2_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTHIZ2_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTHIZ2_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PATT3 register  ******************/
+#define  FSMC_PATT3_ATTSET3                  ((uint32_t)0x000000FF)        /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define  FSMC_PATT3_ATTSET3_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTSET3_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTSET3_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTSET3_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTSET3_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTSET3_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTSET3_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTSET3_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PATT3_ATTWAIT3                 ((uint32_t)0x0000FF00)        /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define  FSMC_PATT3_ATTWAIT3_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTWAIT3_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTWAIT3_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTWAIT3_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTWAIT3_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTWAIT3_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTWAIT3_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTWAIT3_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PATT3_ATTHOLD3                 ((uint32_t)0x00FF0000)        /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define  FSMC_PATT3_ATTHOLD3_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTHOLD3_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTHOLD3_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTHOLD3_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTHOLD3_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTHOLD3_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTHOLD3_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTHOLD3_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PATT3_ATTHIZ3                  ((uint32_t)0xFF000000)        /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define  FSMC_PATT3_ATTHIZ3_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTHIZ3_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTHIZ3_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTHIZ3_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTHIZ3_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTHIZ3_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTHIZ3_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTHIZ3_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PATT4 register  ******************/
+#define  FSMC_PATT4_ATTSET4                  ((uint32_t)0x000000FF)        /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define  FSMC_PATT4_ATTSET4_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTSET4_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTSET4_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTSET4_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTSET4_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTSET4_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTSET4_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTSET4_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PATT4_ATTWAIT4                 ((uint32_t)0x0000FF00)        /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define  FSMC_PATT4_ATTWAIT4_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTWAIT4_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTWAIT4_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTWAIT4_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTWAIT4_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTWAIT4_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTWAIT4_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTWAIT4_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PATT4_ATTHOLD4                 ((uint32_t)0x00FF0000)        /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define  FSMC_PATT4_ATTHOLD4_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTHOLD4_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTHOLD4_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTHOLD4_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTHOLD4_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTHOLD4_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTHOLD4_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTHOLD4_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PATT4_ATTHIZ4                  ((uint32_t)0xFF000000)        /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define  FSMC_PATT4_ATTHIZ4_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTHIZ4_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTHIZ4_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTHIZ4_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTHIZ4_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTHIZ4_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTHIZ4_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTHIZ4_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PIO4 register  *******************/
+#define  FSMC_PIO4_IOSET4                    ((uint32_t)0x000000FF)        /*!< IOSET4[7:0] bits (I/O 4 setup time) */
+#define  FSMC_PIO4_IOSET4_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOSET4_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOSET4_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOSET4_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOSET4_4                  ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOSET4_5                  ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOSET4_6                  ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOSET4_7                  ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PIO4_IOWAIT4                   ((uint32_t)0x0000FF00)        /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define  FSMC_PIO4_IOWAIT4_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOWAIT4_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOWAIT4_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOWAIT4_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOWAIT4_4                 ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOWAIT4_5                 ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOWAIT4_6                 ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOWAIT4_7                 ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PIO4_IOHOLD4                   ((uint32_t)0x00FF0000)        /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define  FSMC_PIO4_IOHOLD4_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOHOLD4_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOHOLD4_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOHOLD4_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOHOLD4_4                 ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOHOLD4_5                 ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOHOLD4_6                 ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOHOLD4_7                 ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PIO4_IOHIZ4                    ((uint32_t)0xFF000000)        /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define  FSMC_PIO4_IOHIZ4_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOHIZ4_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOHIZ4_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOHIZ4_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOHIZ4_4                  ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOHIZ4_5                  ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOHIZ4_6                  ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOHIZ4_7                  ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_ECCR2 register  ******************/
+#define  FSMC_ECCR2_ECC2                     ((uint32_t)0xFFFFFFFF)        /*!< ECC result */
+
+/******************  Bit definition for FSMC_ECCR3 register  ******************/
+#define  FSMC_ECCR3_ECC3                     ((uint32_t)0xFFFFFFFF)        /*!< ECC result */
+
+/******************************************************************************/
+/*                                                                            */
+/*                          SD host Interface                                 */
+/*                                                                            */
+/******************************************************************************/
+
+/******************  Bit definition for SDIO_POWER register  ******************/
+#define  SDIO_POWER_PWRCTRL                  ((uint8_t)0x03)               /*!< PWRCTRL[1:0] bits (Power supply control bits) */
+#define  SDIO_POWER_PWRCTRL_0                ((uint8_t)0x01)               /*!< Bit 0 */
+#define  SDIO_POWER_PWRCTRL_1                ((uint8_t)0x02)               /*!< Bit 1 */
+
+/******************  Bit definition for SDIO_CLKCR register  ******************/
+#define  SDIO_CLKCR_CLKDIV                   ((uint16_t)0x00FF)            /*!< Clock divide factor */
+#define  SDIO_CLKCR_CLKEN                    ((uint16_t)0x0100)            /*!< Clock enable bit */
+#define  SDIO_CLKCR_PWRSAV                   ((uint16_t)0x0200)            /*!< Power saving configuration bit */
+#define  SDIO_CLKCR_BYPASS                   ((uint16_t)0x0400)            /*!< Clock divider bypass enable bit */
+
+#define  SDIO_CLKCR_WIDBUS                   ((uint16_t)0x1800)            /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define  SDIO_CLKCR_WIDBUS_0                 ((uint16_t)0x0800)            /*!< Bit 0 */
+#define  SDIO_CLKCR_WIDBUS_1                 ((uint16_t)0x1000)            /*!< Bit 1 */
+
+#define  SDIO_CLKCR_NEGEDGE                  ((uint16_t)0x2000)            /*!< SDIO_CK dephasing selection bit */
+#define  SDIO_CLKCR_HWFC_EN                  ((uint16_t)0x4000)            /*!< HW Flow Control enable */
+
+/*******************  Bit definition for SDIO_ARG register  *******************/
+#define  SDIO_ARG_CMDARG                     ((uint32_t)0xFFFFFFFF)            /*!< Command argument */
+
+/*******************  Bit definition for SDIO_CMD register  *******************/
+#define  SDIO_CMD_CMDINDEX                   ((uint16_t)0x003F)            /*!< Command Index */
+
+#define  SDIO_CMD_WAITRESP                   ((uint16_t)0x00C0)            /*!< WAITRESP[1:0] bits (Wait for response bits) */
+#define  SDIO_CMD_WAITRESP_0                 ((uint16_t)0x0040)            /*!<  Bit 0 */
+#define  SDIO_CMD_WAITRESP_1                 ((uint16_t)0x0080)            /*!<  Bit 1 */
+
+#define  SDIO_CMD_WAITINT                    ((uint16_t)0x0100)            /*!< CPSM Waits for Interrupt Request */
+#define  SDIO_CMD_WAITPEND                   ((uint16_t)0x0200)            /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define  SDIO_CMD_CPSMEN                     ((uint16_t)0x0400)            /*!< Command path state machine (CPSM) Enable bit */
+#define  SDIO_CMD_SDIOSUSPEND                ((uint16_t)0x0800)            /*!< SD I/O suspend command */
+#define  SDIO_CMD_ENCMDCOMPL                 ((uint16_t)0x1000)            /*!< Enable CMD completion */
+#define  SDIO_CMD_NIEN                       ((uint16_t)0x2000)            /*!< Not Interrupt Enable */
+#define  SDIO_CMD_CEATACMD                   ((uint16_t)0x4000)            /*!< CE-ATA command */
+
+/*****************  Bit definition for SDIO_RESPCMD register  *****************/
+#define  SDIO_RESPCMD_RESPCMD                ((uint8_t)0x3F)               /*!< Response command index */
+
+/******************  Bit definition for SDIO_RESP0 register  ******************/
+#define  SDIO_RESP0_CARDSTATUS0              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP1 register  ******************/
+#define  SDIO_RESP1_CARDSTATUS1              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP2 register  ******************/
+#define  SDIO_RESP2_CARDSTATUS2              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP3 register  ******************/
+#define  SDIO_RESP3_CARDSTATUS3              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP4 register  ******************/
+#define  SDIO_RESP4_CARDSTATUS4              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_DTIMER register  *****************/
+#define  SDIO_DTIMER_DATATIME                ((uint32_t)0xFFFFFFFF)        /*!< Data timeout period. */
+
+/******************  Bit definition for SDIO_DLEN register  *******************/
+#define  SDIO_DLEN_DATALENGTH                ((uint32_t)0x01FFFFFF)        /*!< Data length value */
+
+/******************  Bit definition for SDIO_DCTRL register  ******************/
+#define  SDIO_DCTRL_DTEN                     ((uint16_t)0x0001)            /*!< Data transfer enabled bit */
+#define  SDIO_DCTRL_DTDIR                    ((uint16_t)0x0002)            /*!< Data transfer direction selection */
+#define  SDIO_DCTRL_DTMODE                   ((uint16_t)0x0004)            /*!< Data transfer mode selection */
+#define  SDIO_DCTRL_DMAEN                    ((uint16_t)0x0008)            /*!< DMA enabled bit */
+
+#define  SDIO_DCTRL_DBLOCKSIZE               ((uint16_t)0x00F0)            /*!< DBLOCKSIZE[3:0] bits (Data block size) */
+#define  SDIO_DCTRL_DBLOCKSIZE_0             ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  SDIO_DCTRL_DBLOCKSIZE_1             ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  SDIO_DCTRL_DBLOCKSIZE_2             ((uint16_t)0x0040)            /*!< Bit 2 */
+#define  SDIO_DCTRL_DBLOCKSIZE_3             ((uint16_t)0x0080)            /*!< Bit 3 */
+
+#define  SDIO_DCTRL_RWSTART                  ((uint16_t)0x0100)            /*!< Read wait start */
+#define  SDIO_DCTRL_RWSTOP                   ((uint16_t)0x0200)            /*!< Read wait stop */
+#define  SDIO_DCTRL_RWMOD                    ((uint16_t)0x0400)            /*!< Read wait mode */
+#define  SDIO_DCTRL_SDIOEN                   ((uint16_t)0x0800)            /*!< SD I/O enable functions */
+
+/******************  Bit definition for SDIO_DCOUNT register  *****************/
+#define  SDIO_DCOUNT_DATACOUNT               ((uint32_t)0x01FFFFFF)        /*!< Data count value */
+
+/******************  Bit definition for SDIO_STA register  ********************/
+#define  SDIO_STA_CCRCFAIL                   ((uint32_t)0x00000001)        /*!< Command response received (CRC check failed) */
+#define  SDIO_STA_DCRCFAIL                   ((uint32_t)0x00000002)        /*!< Data block sent/received (CRC check failed) */
+#define  SDIO_STA_CTIMEOUT                   ((uint32_t)0x00000004)        /*!< Command response timeout */
+#define  SDIO_STA_DTIMEOUT                   ((uint32_t)0x00000008)        /*!< Data timeout */
+#define  SDIO_STA_TXUNDERR                   ((uint32_t)0x00000010)        /*!< Transmit FIFO underrun error */
+#define  SDIO_STA_RXOVERR                    ((uint32_t)0x00000020)        /*!< Received FIFO overrun error */
+#define  SDIO_STA_CMDREND                    ((uint32_t)0x00000040)        /*!< Command response received (CRC check passed) */
+#define  SDIO_STA_CMDSENT                    ((uint32_t)0x00000080)        /*!< Command sent (no response required) */
+#define  SDIO_STA_DATAEND                    ((uint32_t)0x00000100)        /*!< Data end (data counter, SDIDCOUNT, is zero) */
+#define  SDIO_STA_STBITERR                   ((uint32_t)0x00000200)        /*!< Start bit not detected on all data signals in wide bus mode */
+#define  SDIO_STA_DBCKEND                    ((uint32_t)0x00000400)        /*!< Data block sent/received (CRC check passed) */
+#define  SDIO_STA_CMDACT                     ((uint32_t)0x00000800)        /*!< Command transfer in progress */
+#define  SDIO_STA_TXACT                      ((uint32_t)0x00001000)        /*!< Data transmit in progress */
+#define  SDIO_STA_RXACT                      ((uint32_t)0x00002000)        /*!< Data receive in progress */
+#define  SDIO_STA_TXFIFOHE                   ((uint32_t)0x00004000)        /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define  SDIO_STA_RXFIFOHF                   ((uint32_t)0x00008000)        /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define  SDIO_STA_TXFIFOF                    ((uint32_t)0x00010000)        /*!< Transmit FIFO full */
+#define  SDIO_STA_RXFIFOF                    ((uint32_t)0x00020000)        /*!< Receive FIFO full */
+#define  SDIO_STA_TXFIFOE                    ((uint32_t)0x00040000)        /*!< Transmit FIFO empty */
+#define  SDIO_STA_RXFIFOE                    ((uint32_t)0x00080000)        /*!< Receive FIFO empty */
+#define  SDIO_STA_TXDAVL                     ((uint32_t)0x00100000)        /*!< Data available in transmit FIFO */
+#define  SDIO_STA_RXDAVL                     ((uint32_t)0x00200000)        /*!< Data available in receive FIFO */
+#define  SDIO_STA_SDIOIT                     ((uint32_t)0x00400000)        /*!< SDIO interrupt received */
+#define  SDIO_STA_CEATAEND                   ((uint32_t)0x00800000)        /*!< CE-ATA command completion signal received for CMD61 */
+
+/*******************  Bit definition for SDIO_ICR register  *******************/
+#define  SDIO_ICR_CCRCFAILC                  ((uint32_t)0x00000001)        /*!< CCRCFAIL flag clear bit */
+#define  SDIO_ICR_DCRCFAILC                  ((uint32_t)0x00000002)        /*!< DCRCFAIL flag clear bit */
+#define  SDIO_ICR_CTIMEOUTC                  ((uint32_t)0x00000004)        /*!< CTIMEOUT flag clear bit */
+#define  SDIO_ICR_DTIMEOUTC                  ((uint32_t)0x00000008)        /*!< DTIMEOUT flag clear bit */
+#define  SDIO_ICR_TXUNDERRC                  ((uint32_t)0x00000010)        /*!< TXUNDERR flag clear bit */
+#define  SDIO_ICR_RXOVERRC                   ((uint32_t)0x00000020)        /*!< RXOVERR flag clear bit */
+#define  SDIO_ICR_CMDRENDC                   ((uint32_t)0x00000040)        /*!< CMDREND flag clear bit */
+#define  SDIO_ICR_CMDSENTC                   ((uint32_t)0x00000080)        /*!< CMDSENT flag clear bit */
+#define  SDIO_ICR_DATAENDC                   ((uint32_t)0x00000100)        /*!< DATAEND flag clear bit */
+#define  SDIO_ICR_STBITERRC                  ((uint32_t)0x00000200)        /*!< STBITERR flag clear bit */
+#define  SDIO_ICR_DBCKENDC                   ((uint32_t)0x00000400)        /*!< DBCKEND flag clear bit */
+#define  SDIO_ICR_SDIOITC                    ((uint32_t)0x00400000)        /*!< SDIOIT flag clear bit */
+#define  SDIO_ICR_CEATAENDC                  ((uint32_t)0x00800000)        /*!< CEATAEND flag clear bit */
+
+/******************  Bit definition for SDIO_MASK register  *******************/
+#define  SDIO_MASK_CCRCFAILIE                ((uint32_t)0x00000001)        /*!< Command CRC Fail Interrupt Enable */
+#define  SDIO_MASK_DCRCFAILIE                ((uint32_t)0x00000002)        /*!< Data CRC Fail Interrupt Enable */
+#define  SDIO_MASK_CTIMEOUTIE                ((uint32_t)0x00000004)        /*!< Command TimeOut Interrupt Enable */
+#define  SDIO_MASK_DTIMEOUTIE                ((uint32_t)0x00000008)        /*!< Data TimeOut Interrupt Enable */
+#define  SDIO_MASK_TXUNDERRIE                ((uint32_t)0x00000010)        /*!< Tx FIFO UnderRun Error Interrupt Enable */
+#define  SDIO_MASK_RXOVERRIE                 ((uint32_t)0x00000020)        /*!< Rx FIFO OverRun Error Interrupt Enable */
+#define  SDIO_MASK_CMDRENDIE                 ((uint32_t)0x00000040)        /*!< Command Response Received Interrupt Enable */
+#define  SDIO_MASK_CMDSENTIE                 ((uint32_t)0x00000080)        /*!< Command Sent Interrupt Enable */
+#define  SDIO_MASK_DATAENDIE                 ((uint32_t)0x00000100)        /*!< Data End Interrupt Enable */
+#define  SDIO_MASK_STBITERRIE                ((uint32_t)0x00000200)        /*!< Start Bit Error Interrupt Enable */
+#define  SDIO_MASK_DBCKENDIE                 ((uint32_t)0x00000400)        /*!< Data Block End Interrupt Enable */
+#define  SDIO_MASK_CMDACTIE                  ((uint32_t)0x00000800)        /*!< Command Acting Interrupt Enable */
+#define  SDIO_MASK_TXACTIE                   ((uint32_t)0x00001000)        /*!< Data Transmit Acting Interrupt Enable */
+#define  SDIO_MASK_RXACTIE                   ((uint32_t)0x00002000)        /*!< Data receive acting interrupt enabled */
+#define  SDIO_MASK_TXFIFOHEIE                ((uint32_t)0x00004000)        /*!< Tx FIFO Half Empty interrupt Enable */
+#define  SDIO_MASK_RXFIFOHFIE                ((uint32_t)0x00008000)        /*!< Rx FIFO Half Full interrupt Enable */
+#define  SDIO_MASK_TXFIFOFIE                 ((uint32_t)0x00010000)        /*!< Tx FIFO Full interrupt Enable */
+#define  SDIO_MASK_RXFIFOFIE                 ((uint32_t)0x00020000)        /*!< Rx FIFO Full interrupt Enable */
+#define  SDIO_MASK_TXFIFOEIE                 ((uint32_t)0x00040000)        /*!< Tx FIFO Empty interrupt Enable */
+#define  SDIO_MASK_RXFIFOEIE                 ((uint32_t)0x00080000)        /*!< Rx FIFO Empty interrupt Enable */
+#define  SDIO_MASK_TXDAVLIE                  ((uint32_t)0x00100000)        /*!< Data available in Tx FIFO interrupt Enable */
+#define  SDIO_MASK_RXDAVLIE                  ((uint32_t)0x00200000)        /*!< Data available in Rx FIFO interrupt Enable */
+#define  SDIO_MASK_SDIOITIE                  ((uint32_t)0x00400000)        /*!< SDIO Mode Interrupt Received interrupt Enable */
+#define  SDIO_MASK_CEATAENDIE                ((uint32_t)0x00800000)        /*!< CE-ATA command completion signal received Interrupt Enable */
+
+/*****************  Bit definition for SDIO_FIFOCNT register  *****************/
+#define  SDIO_FIFOCNT_FIFOCOUNT              ((uint32_t)0x00FFFFFF)        /*!< Remaining number of words to be written to or read from the FIFO */
+
+/******************  Bit definition for SDIO_FIFO register  *******************/
+#define  SDIO_FIFO_FIFODATA                  ((uint32_t)0xFFFFFFFF)        /*!< Receive and transmit FIFO data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                   USB Device FS                            */
+/*                                                                            */
+/******************************************************************************/
+
+/*!< Endpoint-specific registers */
+/*******************  Bit definition for USB_EP0R register  *******************/
+#define  USB_EP0R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP0R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP0R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP0R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP0R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP0R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP0R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP0R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP0R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP0R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP0R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP0R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP0R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP0R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP0R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP0R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP1R register  *******************/
+#define  USB_EP1R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP1R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP1R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP1R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP1R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP1R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP1R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP1R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP1R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP1R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP1R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP1R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP1R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP1R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP1R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP1R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP2R register  *******************/
+#define  USB_EP2R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP2R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP2R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP2R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP2R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP2R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP2R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP2R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP2R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP2R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP2R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP2R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP2R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP2R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP2R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP2R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP3R register  *******************/
+#define  USB_EP3R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP3R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP3R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP3R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP3R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP3R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP3R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP3R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP3R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP3R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP3R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP3R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP3R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP3R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP3R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP3R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP4R register  *******************/
+#define  USB_EP4R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP4R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP4R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP4R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP4R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP4R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP4R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP4R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP4R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP4R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP4R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP4R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP4R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP4R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP4R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP4R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP5R register  *******************/
+#define  USB_EP5R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP5R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP5R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP5R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP5R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP5R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP5R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP5R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP5R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP5R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP5R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP5R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP5R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP5R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP5R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP5R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP6R register  *******************/
+#define  USB_EP6R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP6R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP6R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP6R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP6R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP6R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP6R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP6R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP6R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP6R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP6R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP6R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP6R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP6R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP6R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP6R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP7R register  *******************/
+#define  USB_EP7R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP7R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP7R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP7R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP7R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP7R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP7R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP7R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP7R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP7R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP7R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP7R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP7R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP7R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP7R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP7R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*!< Common registers */
+/*******************  Bit definition for USB_CNTR register  *******************/
+#define  USB_CNTR_FRES                       ((uint16_t)0x0001)            /*!< Force USB Reset */
+#define  USB_CNTR_PDWN                       ((uint16_t)0x0002)            /*!< Power down */
+#define  USB_CNTR_LP_MODE                    ((uint16_t)0x0004)            /*!< Low-power mode */
+#define  USB_CNTR_FSUSP                      ((uint16_t)0x0008)            /*!< Force suspend */
+#define  USB_CNTR_RESUME                     ((uint16_t)0x0010)            /*!< Resume request */
+#define  USB_CNTR_ESOFM                      ((uint16_t)0x0100)            /*!< Expected Start Of Frame Interrupt Mask */
+#define  USB_CNTR_SOFM                       ((uint16_t)0x0200)            /*!< Start Of Frame Interrupt Mask */
+#define  USB_CNTR_RESETM                     ((uint16_t)0x0400)            /*!< RESET Interrupt Mask */
+#define  USB_CNTR_SUSPM                      ((uint16_t)0x0800)            /*!< Suspend mode Interrupt Mask */
+#define  USB_CNTR_WKUPM                      ((uint16_t)0x1000)            /*!< Wakeup Interrupt Mask */
+#define  USB_CNTR_ERRM                       ((uint16_t)0x2000)            /*!< Error Interrupt Mask */
+#define  USB_CNTR_PMAOVRM                    ((uint16_t)0x4000)            /*!< Packet Memory Area Over / Underrun Interrupt Mask */
+#define  USB_CNTR_CTRM                       ((uint16_t)0x8000)            /*!< Correct Transfer Interrupt Mask */
+
+/*******************  Bit definition for USB_ISTR register  *******************/
+#define  USB_ISTR_EP_ID                      ((uint16_t)0x000F)            /*!< Endpoint Identifier */
+#define  USB_ISTR_DIR                        ((uint16_t)0x0010)            /*!< Direction of transaction */
+#define  USB_ISTR_ESOF                       ((uint16_t)0x0100)            /*!< Expected Start Of Frame */
+#define  USB_ISTR_SOF                        ((uint16_t)0x0200)            /*!< Start Of Frame */
+#define  USB_ISTR_RESET                      ((uint16_t)0x0400)            /*!< USB RESET request */
+#define  USB_ISTR_SUSP                       ((uint16_t)0x0800)            /*!< Suspend mode request */
+#define  USB_ISTR_WKUP                       ((uint16_t)0x1000)            /*!< Wake up */
+#define  USB_ISTR_ERR                        ((uint16_t)0x2000)            /*!< Error */
+#define  USB_ISTR_PMAOVR                     ((uint16_t)0x4000)            /*!< Packet Memory Area Over / Underrun */
+#define  USB_ISTR_CTR                        ((uint16_t)0x8000)            /*!< Correct Transfer */
+
+/*******************  Bit definition for USB_FNR register  ********************/
+#define  USB_FNR_FN                          ((uint16_t)0x07FF)            /*!< Frame Number */
+#define  USB_FNR_LSOF                        ((uint16_t)0x1800)            /*!< Lost SOF */
+#define  USB_FNR_LCK                         ((uint16_t)0x2000)            /*!< Locked */
+#define  USB_FNR_RXDM                        ((uint16_t)0x4000)            /*!< Receive Data - Line Status */
+#define  USB_FNR_RXDP                        ((uint16_t)0x8000)            /*!< Receive Data + Line Status */
+
+/******************  Bit definition for USB_DADDR register  *******************/
+#define  USB_DADDR_ADD                       ((uint8_t)0x7F)               /*!< ADD[6:0] bits (Device Address) */
+#define  USB_DADDR_ADD0                      ((uint8_t)0x01)               /*!< Bit 0 */
+#define  USB_DADDR_ADD1                      ((uint8_t)0x02)               /*!< Bit 1 */
+#define  USB_DADDR_ADD2                      ((uint8_t)0x04)               /*!< Bit 2 */
+#define  USB_DADDR_ADD3                      ((uint8_t)0x08)               /*!< Bit 3 */
+#define  USB_DADDR_ADD4                      ((uint8_t)0x10)               /*!< Bit 4 */
+#define  USB_DADDR_ADD5                      ((uint8_t)0x20)               /*!< Bit 5 */
+#define  USB_DADDR_ADD6                      ((uint8_t)0x40)               /*!< Bit 6 */
+
+#define  USB_DADDR_EF                        ((uint8_t)0x80)               /*!< Enable Function */
+
+/******************  Bit definition for USB_BTABLE register  ******************/    
+#define  USB_BTABLE_BTABLE                   ((uint16_t)0xFFF8)            /*!< Buffer Table */
+
+/*!< Buffer descriptor table */
+/*****************  Bit definition for USB_ADDR0_TX register  *****************/
+#define  USB_ADDR0_TX_ADDR0_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 0 */
+
+/*****************  Bit definition for USB_ADDR1_TX register  *****************/
+#define  USB_ADDR1_TX_ADDR1_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 1 */
+
+/*****************  Bit definition for USB_ADDR2_TX register  *****************/
+#define  USB_ADDR2_TX_ADDR2_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 2 */
+
+/*****************  Bit definition for USB_ADDR3_TX register  *****************/
+#define  USB_ADDR3_TX_ADDR3_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 3 */
+
+/*****************  Bit definition for USB_ADDR4_TX register  *****************/
+#define  USB_ADDR4_TX_ADDR4_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 4 */
+
+/*****************  Bit definition for USB_ADDR5_TX register  *****************/
+#define  USB_ADDR5_TX_ADDR5_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 5 */
+
+/*****************  Bit definition for USB_ADDR6_TX register  *****************/
+#define  USB_ADDR6_TX_ADDR6_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 6 */
+
+/*****************  Bit definition for USB_ADDR7_TX register  *****************/
+#define  USB_ADDR7_TX_ADDR7_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/*****************  Bit definition for USB_COUNT0_TX register  ****************/
+#define  USB_COUNT0_TX_COUNT0_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 0 */
+
+/*****************  Bit definition for USB_COUNT1_TX register  ****************/
+#define  USB_COUNT1_TX_COUNT1_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 1 */
+
+/*****************  Bit definition for USB_COUNT2_TX register  ****************/
+#define  USB_COUNT2_TX_COUNT2_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 2 */
+
+/*****************  Bit definition for USB_COUNT3_TX register  ****************/
+#define  USB_COUNT3_TX_COUNT3_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 3 */
+
+/*****************  Bit definition for USB_COUNT4_TX register  ****************/
+#define  USB_COUNT4_TX_COUNT4_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 4 */
+
+/*****************  Bit definition for USB_COUNT5_TX register  ****************/
+#define  USB_COUNT5_TX_COUNT5_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 5 */
+
+/*****************  Bit definition for USB_COUNT6_TX register  ****************/
+#define  USB_COUNT6_TX_COUNT6_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 6 */
+
+/*****************  Bit definition for USB_COUNT7_TX register  ****************/
+#define  USB_COUNT7_TX_COUNT7_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/****************  Bit definition for USB_COUNT0_TX_0 register  ***************/
+#define  USB_COUNT0_TX_0_COUNT0_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 0 (low) */
+
+/****************  Bit definition for USB_COUNT0_TX_1 register  ***************/
+#define  USB_COUNT0_TX_1_COUNT0_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 0 (high) */
+
+/****************  Bit definition for USB_COUNT1_TX_0 register  ***************/
+#define  USB_COUNT1_TX_0_COUNT1_TX_0          ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 1 (low) */
+
+/****************  Bit definition for USB_COUNT1_TX_1 register  ***************/
+#define  USB_COUNT1_TX_1_COUNT1_TX_1          ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 1 (high) */
+
+/****************  Bit definition for USB_COUNT2_TX_0 register  ***************/
+#define  USB_COUNT2_TX_0_COUNT2_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 2 (low) */
+
+/****************  Bit definition for USB_COUNT2_TX_1 register  ***************/
+#define  USB_COUNT2_TX_1_COUNT2_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 2 (high) */
+
+/****************  Bit definition for USB_COUNT3_TX_0 register  ***************/
+#define  USB_COUNT3_TX_0_COUNT3_TX_0         ((uint16_t)0x000003FF)        /*!< Transmission Byte Count 3 (low) */
+
+/****************  Bit definition for USB_COUNT3_TX_1 register  ***************/
+#define  USB_COUNT3_TX_1_COUNT3_TX_1         ((uint16_t)0x03FF0000)        /*!< Transmission Byte Count 3 (high) */
+
+/****************  Bit definition for USB_COUNT4_TX_0 register  ***************/
+#define  USB_COUNT4_TX_0_COUNT4_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 4 (low) */
+
+/****************  Bit definition for USB_COUNT4_TX_1 register  ***************/
+#define  USB_COUNT4_TX_1_COUNT4_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 4 (high) */
+
+/****************  Bit definition for USB_COUNT5_TX_0 register  ***************/
+#define  USB_COUNT5_TX_0_COUNT5_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 5 (low) */
+
+/****************  Bit definition for USB_COUNT5_TX_1 register  ***************/
+#define  USB_COUNT5_TX_1_COUNT5_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 5 (high) */
+
+/****************  Bit definition for USB_COUNT6_TX_0 register  ***************/
+#define  USB_COUNT6_TX_0_COUNT6_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 6 (low) */
+
+/****************  Bit definition for USB_COUNT6_TX_1 register  ***************/
+#define  USB_COUNT6_TX_1_COUNT6_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 6 (high) */
+
+/****************  Bit definition for USB_COUNT7_TX_0 register  ***************/
+#define  USB_COUNT7_TX_0_COUNT7_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 7 (low) */
+
+/****************  Bit definition for USB_COUNT7_TX_1 register  ***************/
+#define  USB_COUNT7_TX_1_COUNT7_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 7 (high) */
+
+/*----------------------------------------------------------------------------*/
+
+/*****************  Bit definition for USB_ADDR0_RX register  *****************/
+#define  USB_ADDR0_RX_ADDR0_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 0 */
+
+/*****************  Bit definition for USB_ADDR1_RX register  *****************/
+#define  USB_ADDR1_RX_ADDR1_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 1 */
+
+/*****************  Bit definition for USB_ADDR2_RX register  *****************/
+#define  USB_ADDR2_RX_ADDR2_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 2 */
+
+/*****************  Bit definition for USB_ADDR3_RX register  *****************/
+#define  USB_ADDR3_RX_ADDR3_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 3 */
+
+/*****************  Bit definition for USB_ADDR4_RX register  *****************/
+#define  USB_ADDR4_RX_ADDR4_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 4 */
+
+/*****************  Bit definition for USB_ADDR5_RX register  *****************/
+#define  USB_ADDR5_RX_ADDR5_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 5 */
+
+/*****************  Bit definition for USB_ADDR6_RX register  *****************/
+#define  USB_ADDR6_RX_ADDR6_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 6 */
+
+/*****************  Bit definition for USB_ADDR7_RX register  *****************/
+#define  USB_ADDR7_RX_ADDR7_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/*****************  Bit definition for USB_COUNT0_RX register  ****************/
+#define  USB_COUNT0_RX_COUNT0_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT0_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT0_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT0_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT0_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT0_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT0_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT0_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT1_RX register  ****************/
+#define  USB_COUNT1_RX_COUNT1_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT1_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT1_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT1_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT1_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT1_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT1_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT1_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT2_RX register  ****************/
+#define  USB_COUNT2_RX_COUNT2_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT2_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT2_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT2_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT2_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT2_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT2_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT2_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT3_RX register  ****************/
+#define  USB_COUNT3_RX_COUNT3_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT3_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT3_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT3_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT3_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT3_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT3_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT3_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT4_RX register  ****************/
+#define  USB_COUNT4_RX_COUNT4_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT4_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT4_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT4_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT4_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT4_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT4_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT4_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT5_RX register  ****************/
+#define  USB_COUNT5_RX_COUNT5_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT5_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT5_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT5_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT5_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT5_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT5_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT5_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT6_RX register  ****************/
+#define  USB_COUNT6_RX_COUNT6_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT6_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT6_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT6_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT6_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT6_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT6_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT6_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT7_RX register  ****************/
+#define  USB_COUNT7_RX_COUNT7_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT7_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT7_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT7_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT7_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT7_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT7_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT7_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*----------------------------------------------------------------------------*/
+
+/****************  Bit definition for USB_COUNT0_RX_0 register  ***************/
+#define  USB_COUNT0_RX_0_COUNT0_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT0_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT0_RX_1 register  ***************/
+#define  USB_COUNT0_RX_1_COUNT0_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 1 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT0_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT1_RX_0 register  ***************/
+#define  USB_COUNT1_RX_0_COUNT1_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT1_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT1_RX_1 register  ***************/
+#define  USB_COUNT1_RX_1_COUNT1_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT1_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT2_RX_0 register  ***************/
+#define  USB_COUNT2_RX_0_COUNT2_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT2_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT2_RX_1 register  ***************/
+#define  USB_COUNT2_RX_1_COUNT2_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT2_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT3_RX_0 register  ***************/
+#define  USB_COUNT3_RX_0_COUNT3_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT3_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT3_RX_1 register  ***************/
+#define  USB_COUNT3_RX_1_COUNT3_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT3_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT4_RX_0 register  ***************/
+#define  USB_COUNT4_RX_0_COUNT4_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_0      ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_1      ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_2      ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_3      ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_4      ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT4_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT4_RX_1 register  ***************/
+#define  USB_COUNT4_RX_1_COUNT4_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT4_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT5_RX_0 register  ***************/
+#define  USB_COUNT5_RX_0_COUNT5_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT5_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT5_RX_1 register  ***************/
+#define  USB_COUNT5_RX_1_COUNT5_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT5_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/***************  Bit definition for USB_COUNT6_RX_0  register  ***************/
+#define  USB_COUNT6_RX_0_COUNT6_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT6_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT6_RX_1 register  ***************/
+#define  USB_COUNT6_RX_1_COUNT6_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT6_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/***************  Bit definition for USB_COUNT7_RX_0 register  ****************/
+#define  USB_COUNT7_RX_0_COUNT7_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT7_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/***************  Bit definition for USB_COUNT7_RX_1 register  ****************/
+#define  USB_COUNT7_RX_1_COUNT7_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT7_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Controller Area Network                            */
+/*                                                                            */
+/******************************************************************************/
+
+/*!< CAN control and status registers */
+/*******************  Bit definition for CAN_MCR register  ********************/
+#define  CAN_MCR_INRQ                        ((uint16_t)0x0001)            /*!< Initialization Request */
+#define  CAN_MCR_SLEEP                       ((uint16_t)0x0002)            /*!< Sleep Mode Request */
+#define  CAN_MCR_TXFP                        ((uint16_t)0x0004)            /*!< Transmit FIFO Priority */
+#define  CAN_MCR_RFLM                        ((uint16_t)0x0008)            /*!< Receive FIFO Locked Mode */
+#define  CAN_MCR_NART                        ((uint16_t)0x0010)            /*!< No Automatic Retransmission */
+#define  CAN_MCR_AWUM                        ((uint16_t)0x0020)            /*!< Automatic Wakeup Mode */
+#define  CAN_MCR_ABOM                        ((uint16_t)0x0040)            /*!< Automatic Bus-Off Management */
+#define  CAN_MCR_TTCM                        ((uint16_t)0x0080)            /*!< Time Triggered Communication Mode */
+#define  CAN_MCR_RESET                       ((uint16_t)0x8000)            /*!< CAN software master reset */
+
+/*******************  Bit definition for CAN_MSR register  ********************/
+#define  CAN_MSR_INAK                        ((uint16_t)0x0001)            /*!< Initialization Acknowledge */
+#define  CAN_MSR_SLAK                        ((uint16_t)0x0002)            /*!< Sleep Acknowledge */
+#define  CAN_MSR_ERRI                        ((uint16_t)0x0004)            /*!< Error Interrupt */
+#define  CAN_MSR_WKUI                        ((uint16_t)0x0008)            /*!< Wakeup Interrupt */
+#define  CAN_MSR_SLAKI                       ((uint16_t)0x0010)            /*!< Sleep Acknowledge Interrupt */
+#define  CAN_MSR_TXM                         ((uint16_t)0x0100)            /*!< Transmit Mode */
+#define  CAN_MSR_RXM                         ((uint16_t)0x0200)            /*!< Receive Mode */
+#define  CAN_MSR_SAMP                        ((uint16_t)0x0400)            /*!< Last Sample Point */
+#define  CAN_MSR_RX                          ((uint16_t)0x0800)            /*!< CAN Rx Signal */
+
+/*******************  Bit definition for CAN_TSR register  ********************/
+#define  CAN_TSR_RQCP0                       ((uint32_t)0x00000001)        /*!< Request Completed Mailbox0 */
+#define  CAN_TSR_TXOK0                       ((uint32_t)0x00000002)        /*!< Transmission OK of Mailbox0 */
+#define  CAN_TSR_ALST0                       ((uint32_t)0x00000004)        /*!< Arbitration Lost for Mailbox0 */
+#define  CAN_TSR_TERR0                       ((uint32_t)0x00000008)        /*!< Transmission Error of Mailbox0 */
+#define  CAN_TSR_ABRQ0                       ((uint32_t)0x00000080)        /*!< Abort Request for Mailbox0 */
+#define  CAN_TSR_RQCP1                       ((uint32_t)0x00000100)        /*!< Request Completed Mailbox1 */
+#define  CAN_TSR_TXOK1                       ((uint32_t)0x00000200)        /*!< Transmission OK of Mailbox1 */
+#define  CAN_TSR_ALST1                       ((uint32_t)0x00000400)        /*!< Arbitration Lost for Mailbox1 */
+#define  CAN_TSR_TERR1                       ((uint32_t)0x00000800)        /*!< Transmission Error of Mailbox1 */
+#define  CAN_TSR_ABRQ1                       ((uint32_t)0x00008000)        /*!< Abort Request for Mailbox 1 */
+#define  CAN_TSR_RQCP2                       ((uint32_t)0x00010000)        /*!< Request Completed Mailbox2 */
+#define  CAN_TSR_TXOK2                       ((uint32_t)0x00020000)        /*!< Transmission OK of Mailbox 2 */
+#define  CAN_TSR_ALST2                       ((uint32_t)0x00040000)        /*!< Arbitration Lost for mailbox 2 */
+#define  CAN_TSR_TERR2                       ((uint32_t)0x00080000)        /*!< Transmission Error of Mailbox 2 */
+#define  CAN_TSR_ABRQ2                       ((uint32_t)0x00800000)        /*!< Abort Request for Mailbox 2 */
+#define  CAN_TSR_CODE                        ((uint32_t)0x03000000)        /*!< Mailbox Code */
+
+#define  CAN_TSR_TME                         ((uint32_t)0x1C000000)        /*!< TME[2:0] bits */
+#define  CAN_TSR_TME0                        ((uint32_t)0x04000000)        /*!< Transmit Mailbox 0 Empty */
+#define  CAN_TSR_TME1                        ((uint32_t)0x08000000)        /*!< Transmit Mailbox 1 Empty */
+#define  CAN_TSR_TME2                        ((uint32_t)0x10000000)        /*!< Transmit Mailbox 2 Empty */
+
+#define  CAN_TSR_LOW                         ((uint32_t)0xE0000000)        /*!< LOW[2:0] bits */
+#define  CAN_TSR_LOW0                        ((uint32_t)0x20000000)        /*!< Lowest Priority Flag for Mailbox 0 */
+#define  CAN_TSR_LOW1                        ((uint32_t)0x40000000)        /*!< Lowest Priority Flag for Mailbox 1 */
+#define  CAN_TSR_LOW2                        ((uint32_t)0x80000000)        /*!< Lowest Priority Flag for Mailbox 2 */
+
+/*******************  Bit definition for CAN_RF0R register  *******************/
+#define  CAN_RF0R_FMP0                       ((uint8_t)0x03)               /*!< FIFO 0 Message Pending */
+#define  CAN_RF0R_FULL0                      ((uint8_t)0x08)               /*!< FIFO 0 Full */
+#define  CAN_RF0R_FOVR0                      ((uint8_t)0x10)               /*!< FIFO 0 Overrun */
+#define  CAN_RF0R_RFOM0                      ((uint8_t)0x20)               /*!< Release FIFO 0 Output Mailbox */
+
+/*******************  Bit definition for CAN_RF1R register  *******************/
+#define  CAN_RF1R_FMP1                       ((uint8_t)0x03)               /*!< FIFO 1 Message Pending */
+#define  CAN_RF1R_FULL1                      ((uint8_t)0x08)               /*!< FIFO 1 Full */
+#define  CAN_RF1R_FOVR1                      ((uint8_t)0x10)               /*!< FIFO 1 Overrun */
+#define  CAN_RF1R_RFOM1                      ((uint8_t)0x20)               /*!< Release FIFO 1 Output Mailbox */
+
+/********************  Bit definition for CAN_IER register  *******************/
+#define  CAN_IER_TMEIE                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Empty Interrupt Enable */
+#define  CAN_IER_FMPIE0                      ((uint32_t)0x00000002)        /*!< FIFO Message Pending Interrupt Enable */
+#define  CAN_IER_FFIE0                       ((uint32_t)0x00000004)        /*!< FIFO Full Interrupt Enable */
+#define  CAN_IER_FOVIE0                      ((uint32_t)0x00000008)        /*!< FIFO Overrun Interrupt Enable */
+#define  CAN_IER_FMPIE1                      ((uint32_t)0x00000010)        /*!< FIFO Message Pending Interrupt Enable */
+#define  CAN_IER_FFIE1                       ((uint32_t)0x00000020)        /*!< FIFO Full Interrupt Enable */
+#define  CAN_IER_FOVIE1                      ((uint32_t)0x00000040)        /*!< FIFO Overrun Interrupt Enable */
+#define  CAN_IER_EWGIE                       ((uint32_t)0x00000100)        /*!< Error Warning Interrupt Enable */
+#define  CAN_IER_EPVIE                       ((uint32_t)0x00000200)        /*!< Error Passive Interrupt Enable */
+#define  CAN_IER_BOFIE                       ((uint32_t)0x00000400)        /*!< Bus-Off Interrupt Enable */
+#define  CAN_IER_LECIE                       ((uint32_t)0x00000800)        /*!< Last Error Code Interrupt Enable */
+#define  CAN_IER_ERRIE                       ((uint32_t)0x00008000)        /*!< Error Interrupt Enable */
+#define  CAN_IER_WKUIE                       ((uint32_t)0x00010000)        /*!< Wakeup Interrupt Enable */
+#define  CAN_IER_SLKIE                       ((uint32_t)0x00020000)        /*!< Sleep Interrupt Enable */
+
+/********************  Bit definition for CAN_ESR register  *******************/
+#define  CAN_ESR_EWGF                        ((uint32_t)0x00000001)        /*!< Error Warning Flag */
+#define  CAN_ESR_EPVF                        ((uint32_t)0x00000002)        /*!< Error Passive Flag */
+#define  CAN_ESR_BOFF                        ((uint32_t)0x00000004)        /*!< Bus-Off Flag */
+
+#define  CAN_ESR_LEC                         ((uint32_t)0x00000070)        /*!< LEC[2:0] bits (Last Error Code) */
+#define  CAN_ESR_LEC_0                       ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  CAN_ESR_LEC_1                       ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  CAN_ESR_LEC_2                       ((uint32_t)0x00000040)        /*!< Bit 2 */
+
+#define  CAN_ESR_TEC                         ((uint32_t)0x00FF0000)        /*!< Least significant byte of the 9-bit Transmit Error Counter */
+#define  CAN_ESR_REC                         ((uint32_t)0xFF000000)        /*!< Receive Error Counter */
+
+/*******************  Bit definition for CAN_BTR register  ********************/
+#define  CAN_BTR_BRP                         ((uint32_t)0x000003FF)        /*!< Baud Rate Prescaler */
+#define  CAN_BTR_TS1                         ((uint32_t)0x000F0000)        /*!< Time Segment 1 */
+#define  CAN_BTR_TS2                         ((uint32_t)0x00700000)        /*!< Time Segment 2 */
+#define  CAN_BTR_SJW                         ((uint32_t)0x03000000)        /*!< Resynchronization Jump Width */
+#define  CAN_BTR_LBKM                        ((uint32_t)0x40000000)        /*!< Loop Back Mode (Debug) */
+#define  CAN_BTR_SILM                        ((uint32_t)0x80000000)        /*!< Silent Mode */
+
+/*!< Mailbox registers */
+/******************  Bit definition for CAN_TI0R register  ********************/
+#define  CAN_TI0R_TXRQ                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Request */
+#define  CAN_TI0R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_TI0R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_TI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended Identifier */
+#define  CAN_TI0R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/******************  Bit definition for CAN_TDT0R register  *******************/
+#define  CAN_TDT0R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_TDT0R_TGT                       ((uint32_t)0x00000100)        /*!< Transmit Global Time */
+#define  CAN_TDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/******************  Bit definition for CAN_TDL0R register  *******************/
+#define  CAN_TDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_TDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_TDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_TDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/******************  Bit definition for CAN_TDH0R register  *******************/
+#define  CAN_TDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_TDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_TDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_TDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_TI1R register  *******************/
+#define  CAN_TI1R_TXRQ                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Request */
+#define  CAN_TI1R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_TI1R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_TI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended Identifier */
+#define  CAN_TI1R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT1R register  ******************/
+#define  CAN_TDT1R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_TDT1R_TGT                       ((uint32_t)0x00000100)        /*!< Transmit Global Time */
+#define  CAN_TDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_TDL1R register  ******************/
+#define  CAN_TDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_TDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_TDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_TDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH1R register  ******************/
+#define  CAN_TDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_TDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_TDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_TDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_TI2R register  *******************/
+#define  CAN_TI2R_TXRQ                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Request */
+#define  CAN_TI2R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_TI2R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_TI2R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended identifier */
+#define  CAN_TI2R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT2R register  ******************/  
+#define  CAN_TDT2R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_TDT2R_TGT                       ((uint32_t)0x00000100)        /*!< Transmit Global Time */
+#define  CAN_TDT2R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_TDL2R register  ******************/
+#define  CAN_TDL2R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_TDL2R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_TDL2R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_TDL2R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH2R register  ******************/
+#define  CAN_TDH2R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_TDH2R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_TDH2R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_TDH2R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_RI0R register  *******************/
+#define  CAN_RI0R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_RI0R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_RI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended Identifier */
+#define  CAN_RI0R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT0R register  ******************/
+#define  CAN_RDT0R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_RDT0R_FMI                       ((uint32_t)0x0000FF00)        /*!< Filter Match Index */
+#define  CAN_RDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL0R register  ******************/
+#define  CAN_RDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_RDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_RDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_RDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH0R register  ******************/
+#define  CAN_RDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_RDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_RDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_RDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_RI1R register  *******************/
+#define  CAN_RI1R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_RI1R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_RI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended identifier */
+#define  CAN_RI1R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT1R register  ******************/
+#define  CAN_RDT1R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_RDT1R_FMI                       ((uint32_t)0x0000FF00)        /*!< Filter Match Index */
+#define  CAN_RDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL1R register  ******************/
+#define  CAN_RDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_RDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_RDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_RDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH1R register  ******************/
+#define  CAN_RDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_RDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_RDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_RDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*!< CAN filter registers */
+/*******************  Bit definition for CAN_FMR register  ********************/
+#define  CAN_FMR_FINIT                       ((uint8_t)0x01)               /*!< Filter Init Mode */
+
+/*******************  Bit definition for CAN_FM1R register  *******************/
+#define  CAN_FM1R_FBM                        ((uint16_t)0x3FFF)            /*!< Filter Mode */
+#define  CAN_FM1R_FBM0                       ((uint16_t)0x0001)            /*!< Filter Init Mode bit 0 */
+#define  CAN_FM1R_FBM1                       ((uint16_t)0x0002)            /*!< Filter Init Mode bit 1 */
+#define  CAN_FM1R_FBM2                       ((uint16_t)0x0004)            /*!< Filter Init Mode bit 2 */
+#define  CAN_FM1R_FBM3                       ((uint16_t)0x0008)            /*!< Filter Init Mode bit 3 */
+#define  CAN_FM1R_FBM4                       ((uint16_t)0x0010)            /*!< Filter Init Mode bit 4 */
+#define  CAN_FM1R_FBM5                       ((uint16_t)0x0020)            /*!< Filter Init Mode bit 5 */
+#define  CAN_FM1R_FBM6                       ((uint16_t)0x0040)            /*!< Filter Init Mode bit 6 */
+#define  CAN_FM1R_FBM7                       ((uint16_t)0x0080)            /*!< Filter Init Mode bit 7 */
+#define  CAN_FM1R_FBM8                       ((uint16_t)0x0100)            /*!< Filter Init Mode bit 8 */
+#define  CAN_FM1R_FBM9                       ((uint16_t)0x0200)            /*!< Filter Init Mode bit 9 */
+#define  CAN_FM1R_FBM10                      ((uint16_t)0x0400)            /*!< Filter Init Mode bit 10 */
+#define  CAN_FM1R_FBM11                      ((uint16_t)0x0800)            /*!< Filter Init Mode bit 11 */
+#define  CAN_FM1R_FBM12                      ((uint16_t)0x1000)            /*!< Filter Init Mode bit 12 */
+#define  CAN_FM1R_FBM13                      ((uint16_t)0x2000)            /*!< Filter Init Mode bit 13 */
+
+/*******************  Bit definition for CAN_FS1R register  *******************/
+#define  CAN_FS1R_FSC                        ((uint16_t)0x3FFF)            /*!< Filter Scale Configuration */
+#define  CAN_FS1R_FSC0                       ((uint16_t)0x0001)            /*!< Filter Scale Configuration bit 0 */
+#define  CAN_FS1R_FSC1                       ((uint16_t)0x0002)            /*!< Filter Scale Configuration bit 1 */
+#define  CAN_FS1R_FSC2                       ((uint16_t)0x0004)            /*!< Filter Scale Configuration bit 2 */
+#define  CAN_FS1R_FSC3                       ((uint16_t)0x0008)            /*!< Filter Scale Configuration bit 3 */
+#define  CAN_FS1R_FSC4                       ((uint16_t)0x0010)            /*!< Filter Scale Configuration bit 4 */
+#define  CAN_FS1R_FSC5                       ((uint16_t)0x0020)            /*!< Filter Scale Configuration bit 5 */
+#define  CAN_FS1R_FSC6                       ((uint16_t)0x0040)            /*!< Filter Scale Configuration bit 6 */
+#define  CAN_FS1R_FSC7                       ((uint16_t)0x0080)            /*!< Filter Scale Configuration bit 7 */
+#define  CAN_FS1R_FSC8                       ((uint16_t)0x0100)            /*!< Filter Scale Configuration bit 8 */
+#define  CAN_FS1R_FSC9                       ((uint16_t)0x0200)            /*!< Filter Scale Configuration bit 9 */
+#define  CAN_FS1R_FSC10                      ((uint16_t)0x0400)            /*!< Filter Scale Configuration bit 10 */
+#define  CAN_FS1R_FSC11                      ((uint16_t)0x0800)            /*!< Filter Scale Configuration bit 11 */
+#define  CAN_FS1R_FSC12                      ((uint16_t)0x1000)            /*!< Filter Scale Configuration bit 12 */
+#define  CAN_FS1R_FSC13                      ((uint16_t)0x2000)            /*!< Filter Scale Configuration bit 13 */
+
+/******************  Bit definition for CAN_FFA1R register  *******************/
+#define  CAN_FFA1R_FFA                       ((uint16_t)0x3FFF)            /*!< Filter FIFO Assignment */
+#define  CAN_FFA1R_FFA0                      ((uint16_t)0x0001)            /*!< Filter FIFO Assignment for Filter 0 */
+#define  CAN_FFA1R_FFA1                      ((uint16_t)0x0002)            /*!< Filter FIFO Assignment for Filter 1 */
+#define  CAN_FFA1R_FFA2                      ((uint16_t)0x0004)            /*!< Filter FIFO Assignment for Filter 2 */
+#define  CAN_FFA1R_FFA3                      ((uint16_t)0x0008)            /*!< Filter FIFO Assignment for Filter 3 */
+#define  CAN_FFA1R_FFA4                      ((uint16_t)0x0010)            /*!< Filter FIFO Assignment for Filter 4 */
+#define  CAN_FFA1R_FFA5                      ((uint16_t)0x0020)            /*!< Filter FIFO Assignment for Filter 5 */
+#define  CAN_FFA1R_FFA6                      ((uint16_t)0x0040)            /*!< Filter FIFO Assignment for Filter 6 */
+#define  CAN_FFA1R_FFA7                      ((uint16_t)0x0080)            /*!< Filter FIFO Assignment for Filter 7 */
+#define  CAN_FFA1R_FFA8                      ((uint16_t)0x0100)            /*!< Filter FIFO Assignment for Filter 8 */
+#define  CAN_FFA1R_FFA9                      ((uint16_t)0x0200)            /*!< Filter FIFO Assignment for Filter 9 */
+#define  CAN_FFA1R_FFA10                     ((uint16_t)0x0400)            /*!< Filter FIFO Assignment for Filter 10 */
+#define  CAN_FFA1R_FFA11                     ((uint16_t)0x0800)            /*!< Filter FIFO Assignment for Filter 11 */
+#define  CAN_FFA1R_FFA12                     ((uint16_t)0x1000)            /*!< Filter FIFO Assignment for Filter 12 */
+#define  CAN_FFA1R_FFA13                     ((uint16_t)0x2000)            /*!< Filter FIFO Assignment for Filter 13 */
+
+/*******************  Bit definition for CAN_FA1R register  *******************/
+#define  CAN_FA1R_FACT                       ((uint16_t)0x3FFF)            /*!< Filter Active */
+#define  CAN_FA1R_FACT0                      ((uint16_t)0x0001)            /*!< Filter 0 Active */
+#define  CAN_FA1R_FACT1                      ((uint16_t)0x0002)            /*!< Filter 1 Active */
+#define  CAN_FA1R_FACT2                      ((uint16_t)0x0004)            /*!< Filter 2 Active */
+#define  CAN_FA1R_FACT3                      ((uint16_t)0x0008)            /*!< Filter 3 Active */
+#define  CAN_FA1R_FACT4                      ((uint16_t)0x0010)            /*!< Filter 4 Active */
+#define  CAN_FA1R_FACT5                      ((uint16_t)0x0020)            /*!< Filter 5 Active */
+#define  CAN_FA1R_FACT6                      ((uint16_t)0x0040)            /*!< Filter 6 Active */
+#define  CAN_FA1R_FACT7                      ((uint16_t)0x0080)            /*!< Filter 7 Active */
+#define  CAN_FA1R_FACT8                      ((uint16_t)0x0100)            /*!< Filter 8 Active */
+#define  CAN_FA1R_FACT9                      ((uint16_t)0x0200)            /*!< Filter 9 Active */
+#define  CAN_FA1R_FACT10                     ((uint16_t)0x0400)            /*!< Filter 10 Active */
+#define  CAN_FA1R_FACT11                     ((uint16_t)0x0800)            /*!< Filter 11 Active */
+#define  CAN_FA1R_FACT12                     ((uint16_t)0x1000)            /*!< Filter 12 Active */
+#define  CAN_FA1R_FACT13                     ((uint16_t)0x2000)            /*!< Filter 13 Active */
+
+/*******************  Bit definition for CAN_F0R1 register  *******************/
+#define  CAN_F0R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F0R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F0R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F0R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F0R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F0R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F0R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F0R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F0R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F0R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F0R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F0R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F0R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F0R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F0R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F0R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F0R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F0R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F0R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F0R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F0R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F0R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F0R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F0R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F0R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F0R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F0R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F0R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F0R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F0R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F0R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F0R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R1 register  *******************/
+#define  CAN_F1R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F1R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F1R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F1R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F1R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F1R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F1R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F1R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F1R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F1R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F1R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F1R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F1R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F1R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F1R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F1R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F1R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F1R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F1R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F1R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F1R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F1R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F1R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F1R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F1R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F1R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F1R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F1R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F1R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F1R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F1R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F1R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R1 register  *******************/
+#define  CAN_F2R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F2R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F2R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F2R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F2R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F2R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F2R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F2R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F2R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F2R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F2R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F2R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F2R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F2R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F2R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F2R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F2R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F2R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F2R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F2R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F2R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F2R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F2R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F2R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F2R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F2R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F2R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F2R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F2R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F2R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F2R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F2R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R1 register  *******************/
+#define  CAN_F3R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F3R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F3R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F3R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F3R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F3R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F3R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F3R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F3R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F3R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F3R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F3R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F3R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F3R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F3R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F3R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F3R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F3R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F3R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F3R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F3R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F3R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F3R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F3R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F3R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F3R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F3R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F3R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F3R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F3R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F3R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F3R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R1 register  *******************/
+#define  CAN_F4R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F4R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F4R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F4R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F4R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F4R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F4R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F4R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F4R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F4R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F4R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F4R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F4R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F4R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F4R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F4R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F4R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F4R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F4R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F4R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F4R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F4R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F4R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F4R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F4R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F4R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F4R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F4R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F4R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F4R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F4R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F4R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R1 register  *******************/
+#define  CAN_F5R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F5R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F5R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F5R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F5R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F5R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F5R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F5R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F5R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F5R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F5R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F5R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F5R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F5R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F5R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F5R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F5R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F5R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F5R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F5R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F5R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F5R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F5R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F5R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F5R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F5R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F5R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F5R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F5R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F5R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F5R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F5R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R1 register  *******************/
+#define  CAN_F6R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F6R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F6R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F6R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F6R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F6R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F6R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F6R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F6R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F6R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F6R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F6R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F6R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F6R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F6R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F6R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F6R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F6R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F6R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F6R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F6R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F6R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F6R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F6R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F6R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F6R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F6R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F6R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F6R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F6R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F6R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F6R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R1 register  *******************/
+#define  CAN_F7R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F7R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F7R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F7R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F7R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F7R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F7R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F7R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F7R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F7R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F7R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F7R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F7R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F7R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F7R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F7R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F7R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F7R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F7R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F7R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F7R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F7R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F7R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F7R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F7R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F7R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F7R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F7R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F7R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F7R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F7R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F7R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R1 register  *******************/
+#define  CAN_F8R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F8R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F8R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F8R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F8R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F8R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F8R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F8R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F8R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F8R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F8R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F8R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F8R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F8R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F8R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F8R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F8R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F8R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F8R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F8R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F8R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F8R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F8R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F8R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F8R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F8R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F8R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F8R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F8R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F8R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F8R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F8R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R1 register  *******************/
+#define  CAN_F9R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F9R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F9R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F9R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F9R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F9R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F9R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F9R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F9R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F9R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F9R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F9R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F9R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F9R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F9R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F9R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F9R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F9R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F9R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F9R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F9R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F9R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F9R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F9R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F9R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F9R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F9R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F9R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F9R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F9R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F9R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F9R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R1 register  ******************/
+#define  CAN_F10R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F10R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F10R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F10R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F10R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F10R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F10R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F10R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F10R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F10R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F10R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F10R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F10R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F10R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F10R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F10R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F10R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F10R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F10R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F10R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F10R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F10R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F10R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F10R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F10R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F10R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F10R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F10R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F10R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F10R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F10R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F10R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R1 register  ******************/
+#define  CAN_F11R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F11R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F11R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F11R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F11R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F11R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F11R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F11R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F11R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F11R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F11R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F11R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F11R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F11R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F11R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F11R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F11R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F11R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F11R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F11R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F11R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F11R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F11R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F11R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F11R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F11R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F11R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F11R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F11R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F11R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F11R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F11R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R1 register  ******************/
+#define  CAN_F12R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F12R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F12R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F12R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F12R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F12R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F12R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F12R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F12R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F12R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F12R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F12R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F12R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F12R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F12R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F12R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F12R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F12R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F12R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F12R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F12R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F12R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F12R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F12R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F12R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F12R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F12R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F12R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F12R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F12R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F12R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F12R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R1 register  ******************/
+#define  CAN_F13R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F13R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F13R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F13R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F13R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F13R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F13R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F13R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F13R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F13R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F13R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F13R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F13R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F13R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F13R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F13R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F13R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F13R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F13R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F13R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F13R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F13R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F13R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F13R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F13R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F13R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F13R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F13R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F13R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F13R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F13R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F13R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F0R2 register  *******************/
+#define  CAN_F0R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F0R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F0R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F0R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F0R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F0R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F0R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F0R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F0R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F0R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F0R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F0R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F0R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F0R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F0R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F0R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F0R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F0R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F0R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F0R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F0R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F0R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F0R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F0R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F0R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F0R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F0R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F0R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F0R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F0R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F0R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F0R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R2 register  *******************/
+#define  CAN_F1R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F1R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F1R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F1R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F1R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F1R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F1R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F1R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F1R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F1R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F1R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F1R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F1R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F1R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F1R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F1R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F1R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F1R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F1R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F1R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F1R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F1R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F1R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F1R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F1R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F1R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F1R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F1R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F1R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F1R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F1R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F1R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R2 register  *******************/
+#define  CAN_F2R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F2R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F2R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F2R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F2R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F2R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F2R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F2R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F2R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F2R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F2R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F2R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F2R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F2R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F2R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F2R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F2R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F2R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F2R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F2R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F2R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F2R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F2R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F2R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F2R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F2R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F2R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F2R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F2R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F2R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F2R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F2R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R2 register  *******************/
+#define  CAN_F3R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F3R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F3R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F3R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F3R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F3R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F3R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F3R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F3R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F3R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F3R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F3R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F3R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F3R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F3R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F3R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F3R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F3R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F3R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F3R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F3R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F3R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F3R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F3R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F3R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F3R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F3R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F3R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F3R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F3R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F3R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F3R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R2 register  *******************/
+#define  CAN_F4R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F4R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F4R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F4R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F4R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F4R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F4R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F4R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F4R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F4R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F4R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F4R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F4R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F4R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F4R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F4R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F4R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F4R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F4R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F4R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F4R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F4R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F4R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F4R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F4R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F4R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F4R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F4R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F4R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F4R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F4R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F4R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R2 register  *******************/
+#define  CAN_F5R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F5R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F5R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F5R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F5R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F5R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F5R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F5R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F5R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F5R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F5R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F5R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F5R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F5R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F5R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F5R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F5R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F5R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F5R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F5R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F5R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F5R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F5R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F5R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F5R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F5R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F5R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F5R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F5R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F5R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F5R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F5R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R2 register  *******************/
+#define  CAN_F6R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F6R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F6R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F6R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F6R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F6R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F6R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F6R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F6R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F6R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F6R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F6R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F6R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F6R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F6R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F6R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F6R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F6R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F6R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F6R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F6R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F6R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F6R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F6R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F6R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F6R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F6R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F6R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F6R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F6R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F6R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F6R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R2 register  *******************/
+#define  CAN_F7R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F7R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F7R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F7R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F7R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F7R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F7R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F7R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F7R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F7R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F7R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F7R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F7R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F7R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F7R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F7R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F7R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F7R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F7R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F7R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F7R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F7R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F7R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F7R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F7R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F7R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F7R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F7R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F7R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F7R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F7R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F7R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R2 register  *******************/
+#define  CAN_F8R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F8R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F8R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F8R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F8R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F8R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F8R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F8R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F8R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F8R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F8R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F8R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F8R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F8R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F8R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F8R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F8R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F8R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F8R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F8R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F8R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F8R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F8R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F8R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F8R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F8R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F8R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F8R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F8R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F8R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F8R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F8R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R2 register  *******************/
+#define  CAN_F9R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F9R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F9R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F9R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F9R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F9R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F9R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F9R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F9R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F9R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F9R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F9R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F9R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F9R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F9R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F9R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F9R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F9R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F9R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F9R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F9R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F9R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F9R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F9R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F9R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F9R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F9R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F9R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F9R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F9R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F9R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F9R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R2 register  ******************/
+#define  CAN_F10R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F10R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F10R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F10R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F10R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F10R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F10R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F10R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F10R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F10R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F10R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F10R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F10R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F10R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F10R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F10R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F10R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F10R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F10R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F10R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F10R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F10R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F10R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F10R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F10R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F10R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F10R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F10R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F10R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F10R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F10R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F10R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R2 register  ******************/
+#define  CAN_F11R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F11R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F11R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F11R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F11R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F11R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F11R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F11R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F11R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F11R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F11R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F11R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F11R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F11R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F11R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F11R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F11R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F11R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F11R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F11R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F11R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F11R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F11R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F11R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F11R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F11R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F11R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F11R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F11R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F11R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F11R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F11R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R2 register  ******************/
+#define  CAN_F12R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F12R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F12R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F12R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F12R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F12R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F12R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F12R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F12R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F12R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F12R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F12R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F12R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F12R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F12R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F12R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F12R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F12R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F12R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F12R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F12R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F12R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F12R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F12R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F12R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F12R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F12R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F12R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F12R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F12R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F12R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F12R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R2 register  ******************/
+#define  CAN_F13R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F13R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F13R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F13R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F13R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F13R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F13R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F13R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F13R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F13R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F13R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F13R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F13R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F13R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F13R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F13R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F13R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F13R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F13R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F13R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F13R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F13R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F13R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F13R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F13R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F13R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F13R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F13R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F13R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F13R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F13R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F13R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Serial Peripheral Interface                         */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for SPI_CR1 register  ********************/
+#define  SPI_CR1_CPHA                        ((uint16_t)0x0001)            /*!< Clock Phase */
+#define  SPI_CR1_CPOL                        ((uint16_t)0x0002)            /*!< Clock Polarity */
+#define  SPI_CR1_MSTR                        ((uint16_t)0x0004)            /*!< Master Selection */
+
+#define  SPI_CR1_BR                          ((uint16_t)0x0038)            /*!< BR[2:0] bits (Baud Rate Control) */
+#define  SPI_CR1_BR_0                        ((uint16_t)0x0008)            /*!< Bit 0 */
+#define  SPI_CR1_BR_1                        ((uint16_t)0x0010)            /*!< Bit 1 */
+#define  SPI_CR1_BR_2                        ((uint16_t)0x0020)            /*!< Bit 2 */
+
+#define  SPI_CR1_SPE                         ((uint16_t)0x0040)            /*!< SPI Enable */
+#define  SPI_CR1_LSBFIRST                    ((uint16_t)0x0080)            /*!< Frame Format */
+#define  SPI_CR1_SSI                         ((uint16_t)0x0100)            /*!< Internal slave select */
+#define  SPI_CR1_SSM                         ((uint16_t)0x0200)            /*!< Software slave management */
+#define  SPI_CR1_RXONLY                      ((uint16_t)0x0400)            /*!< Receive only */
+#define  SPI_CR1_DFF                         ((uint16_t)0x0800)            /*!< Data Frame Format */
+#define  SPI_CR1_CRCNEXT                     ((uint16_t)0x1000)            /*!< Transmit CRC next */
+#define  SPI_CR1_CRCEN                       ((uint16_t)0x2000)            /*!< Hardware CRC calculation enable */
+#define  SPI_CR1_BIDIOE                      ((uint16_t)0x4000)            /*!< Output enable in bidirectional mode */
+#define  SPI_CR1_BIDIMODE                    ((uint16_t)0x8000)            /*!< Bidirectional data mode enable */
+
+/*******************  Bit definition for SPI_CR2 register  ********************/
+#define  SPI_CR2_RXDMAEN                     ((uint8_t)0x01)               /*!< Rx Buffer DMA Enable */
+#define  SPI_CR2_TXDMAEN                     ((uint8_t)0x02)               /*!< Tx Buffer DMA Enable */
+#define  SPI_CR2_SSOE                        ((uint8_t)0x04)               /*!< SS Output Enable */
+#define  SPI_CR2_ERRIE                       ((uint8_t)0x20)               /*!< Error Interrupt Enable */
+#define  SPI_CR2_RXNEIE                      ((uint8_t)0x40)               /*!< RX buffer Not Empty Interrupt Enable */
+#define  SPI_CR2_TXEIE                       ((uint8_t)0x80)               /*!< Tx buffer Empty Interrupt Enable */
+
+/********************  Bit definition for SPI_SR register  ********************/
+#define  SPI_SR_RXNE                         ((uint8_t)0x01)               /*!< Receive buffer Not Empty */
+#define  SPI_SR_TXE                          ((uint8_t)0x02)               /*!< Transmit buffer Empty */
+#define  SPI_SR_CHSIDE                       ((uint8_t)0x04)               /*!< Channel side */
+#define  SPI_SR_UDR                          ((uint8_t)0x08)               /*!< Underrun flag */
+#define  SPI_SR_CRCERR                       ((uint8_t)0x10)               /*!< CRC Error flag */
+#define  SPI_SR_MODF                         ((uint8_t)0x20)               /*!< Mode fault */
+#define  SPI_SR_OVR                          ((uint8_t)0x40)               /*!< Overrun flag */
+#define  SPI_SR_BSY                          ((uint8_t)0x80)               /*!< Busy flag */
+
+/********************  Bit definition for SPI_DR register  ********************/
+#define  SPI_DR_DR                           ((uint16_t)0xFFFF)            /*!< Data Register */
+
+/*******************  Bit definition for SPI_CRCPR register  ******************/
+#define  SPI_CRCPR_CRCPOLY                   ((uint16_t)0xFFFF)            /*!< CRC polynomial register */
+
+/******************  Bit definition for SPI_RXCRCR register  ******************/
+#define  SPI_RXCRCR_RXCRC                    ((uint16_t)0xFFFF)            /*!< Rx CRC Register */
+
+/******************  Bit definition for SPI_TXCRCR register  ******************/
+#define  SPI_TXCRCR_TXCRC                    ((uint16_t)0xFFFF)            /*!< Tx CRC Register */
+
+/******************  Bit definition for SPI_I2SCFGR register  *****************/
+#define  SPI_I2SCFGR_CHLEN                   ((uint16_t)0x0001)            /*!< Channel length (number of bits per audio channel) */
+
+#define  SPI_I2SCFGR_DATLEN                  ((uint16_t)0x0006)            /*!< DATLEN[1:0] bits (Data length to be transferred) */
+#define  SPI_I2SCFGR_DATLEN_0                ((uint16_t)0x0002)            /*!< Bit 0 */
+#define  SPI_I2SCFGR_DATLEN_1                ((uint16_t)0x0004)            /*!< Bit 1 */
+
+#define  SPI_I2SCFGR_CKPOL                   ((uint16_t)0x0008)            /*!< steady state clock polarity */
+
+#define  SPI_I2SCFGR_I2SSTD                  ((uint16_t)0x0030)            /*!< I2SSTD[1:0] bits (I2S standard selection) */
+#define  SPI_I2SCFGR_I2SSTD_0                ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  SPI_I2SCFGR_I2SSTD_1                ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  SPI_I2SCFGR_PCMSYNC                 ((uint16_t)0x0080)            /*!< PCM frame synchronization */
+
+#define  SPI_I2SCFGR_I2SCFG                  ((uint16_t)0x0300)            /*!< I2SCFG[1:0] bits (I2S configuration mode) */
+#define  SPI_I2SCFGR_I2SCFG_0                ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  SPI_I2SCFGR_I2SCFG_1                ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  SPI_I2SCFGR_I2SE                    ((uint16_t)0x0400)            /*!< I2S Enable */
+#define  SPI_I2SCFGR_I2SMOD                  ((uint16_t)0x0800)            /*!< I2S mode selection */
+
+/******************  Bit definition for SPI_I2SPR register  *******************/
+#define  SPI_I2SPR_I2SDIV                    ((uint16_t)0x00FF)            /*!< I2S Linear prescaler */
+#define  SPI_I2SPR_ODD                       ((uint16_t)0x0100)            /*!< Odd factor for the prescaler */
+#define  SPI_I2SPR_MCKOE                     ((uint16_t)0x0200)            /*!< Master Clock Output Enable */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Inter-integrated Circuit Interface                    */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for I2C_CR1 register  ********************/
+#define  I2C_CR1_PE                          ((uint16_t)0x0001)            /*!< Peripheral Enable */
+#define  I2C_CR1_SMBUS                       ((uint16_t)0x0002)            /*!< SMBus Mode */
+#define  I2C_CR1_SMBTYPE                     ((uint16_t)0x0008)            /*!< SMBus Type */
+#define  I2C_CR1_ENARP                       ((uint16_t)0x0010)            /*!< ARP Enable */
+#define  I2C_CR1_ENPEC                       ((uint16_t)0x0020)            /*!< PEC Enable */
+#define  I2C_CR1_ENGC                        ((uint16_t)0x0040)            /*!< General Call Enable */
+#define  I2C_CR1_NOSTRETCH                   ((uint16_t)0x0080)            /*!< Clock Stretching Disable (Slave mode) */
+#define  I2C_CR1_START                       ((uint16_t)0x0100)            /*!< Start Generation */
+#define  I2C_CR1_STOP                        ((uint16_t)0x0200)            /*!< Stop Generation */
+#define  I2C_CR1_ACK                         ((uint16_t)0x0400)            /*!< Acknowledge Enable */
+#define  I2C_CR1_POS                         ((uint16_t)0x0800)            /*!< Acknowledge/PEC Position (for data reception) */
+#define  I2C_CR1_PEC                         ((uint16_t)0x1000)            /*!< Packet Error Checking */
+#define  I2C_CR1_ALERT                       ((uint16_t)0x2000)            /*!< SMBus Alert */
+#define  I2C_CR1_SWRST                       ((uint16_t)0x8000)            /*!< Software Reset */
+
+/*******************  Bit definition for I2C_CR2 register  ********************/
+#define  I2C_CR2_FREQ                        ((uint16_t)0x003F)            /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define  I2C_CR2_FREQ_0                      ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  I2C_CR2_FREQ_1                      ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  I2C_CR2_FREQ_2                      ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  I2C_CR2_FREQ_3                      ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  I2C_CR2_FREQ_4                      ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  I2C_CR2_FREQ_5                      ((uint16_t)0x0020)            /*!< Bit 5 */
+
+#define  I2C_CR2_ITERREN                     ((uint16_t)0x0100)            /*!< Error Interrupt Enable */
+#define  I2C_CR2_ITEVTEN                     ((uint16_t)0x0200)            /*!< Event Interrupt Enable */
+#define  I2C_CR2_ITBUFEN                     ((uint16_t)0x0400)            /*!< Buffer Interrupt Enable */
+#define  I2C_CR2_DMAEN                       ((uint16_t)0x0800)            /*!< DMA Requests Enable */
+#define  I2C_CR2_LAST                        ((uint16_t)0x1000)            /*!< DMA Last Transfer */
+
+/*******************  Bit definition for I2C_OAR1 register  *******************/
+#define  I2C_OAR1_ADD1_7                     ((uint16_t)0x00FE)            /*!< Interface Address */
+#define  I2C_OAR1_ADD8_9                     ((uint16_t)0x0300)            /*!< Interface Address */
+
+#define  I2C_OAR1_ADD0                       ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  I2C_OAR1_ADD1                       ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  I2C_OAR1_ADD2                       ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  I2C_OAR1_ADD3                       ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  I2C_OAR1_ADD4                       ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  I2C_OAR1_ADD5                       ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  I2C_OAR1_ADD6                       ((uint16_t)0x0040)            /*!< Bit 6 */
+#define  I2C_OAR1_ADD7                       ((uint16_t)0x0080)            /*!< Bit 7 */
+#define  I2C_OAR1_ADD8                       ((uint16_t)0x0100)            /*!< Bit 8 */
+#define  I2C_OAR1_ADD9                       ((uint16_t)0x0200)            /*!< Bit 9 */
+
+#define  I2C_OAR1_ADDMODE                    ((uint16_t)0x8000)            /*!< Addressing Mode (Slave mode) */
+
+/*******************  Bit definition for I2C_OAR2 register  *******************/
+#define  I2C_OAR2_ENDUAL                     ((uint8_t)0x01)               /*!< Dual addressing mode enable */
+#define  I2C_OAR2_ADD2                       ((uint8_t)0xFE)               /*!< Interface address */
+
+/********************  Bit definition for I2C_DR register  ********************/
+#define  I2C_DR_DR                           ((uint8_t)0xFF)               /*!< 8-bit Data Register */
+
+/*******************  Bit definition for I2C_SR1 register  ********************/
+#define  I2C_SR1_SB                          ((uint16_t)0x0001)            /*!< Start Bit (Master mode) */
+#define  I2C_SR1_ADDR                        ((uint16_t)0x0002)            /*!< Address sent (master mode)/matched (slave mode) */
+#define  I2C_SR1_BTF                         ((uint16_t)0x0004)            /*!< Byte Transfer Finished */
+#define  I2C_SR1_ADD10                       ((uint16_t)0x0008)            /*!< 10-bit header sent (Master mode) */
+#define  I2C_SR1_STOPF                       ((uint16_t)0x0010)            /*!< Stop detection (Slave mode) */
+#define  I2C_SR1_RXNE                        ((uint16_t)0x0040)            /*!< Data Register not Empty (receivers) */
+#define  I2C_SR1_TXE                         ((uint16_t)0x0080)            /*!< Data Register Empty (transmitters) */
+#define  I2C_SR1_BERR                        ((uint16_t)0x0100)            /*!< Bus Error */
+#define  I2C_SR1_ARLO                        ((uint16_t)0x0200)            /*!< Arbitration Lost (master mode) */
+#define  I2C_SR1_AF                          ((uint16_t)0x0400)            /*!< Acknowledge Failure */
+#define  I2C_SR1_OVR                         ((uint16_t)0x0800)            /*!< Overrun/Underrun */
+#define  I2C_SR1_PECERR                      ((uint16_t)0x1000)            /*!< PEC Error in reception */
+#define  I2C_SR1_TIMEOUT                     ((uint16_t)0x4000)            /*!< Timeout or Tlow Error */
+#define  I2C_SR1_SMBALERT                    ((uint16_t)0x8000)            /*!< SMBus Alert */
+
+/*******************  Bit definition for I2C_SR2 register  ********************/
+#define  I2C_SR2_MSL                         ((uint16_t)0x0001)            /*!< Master/Slave */
+#define  I2C_SR2_BUSY                        ((uint16_t)0x0002)            /*!< Bus Busy */
+#define  I2C_SR2_TRA                         ((uint16_t)0x0004)            /*!< Transmitter/Receiver */
+#define  I2C_SR2_GENCALL                     ((uint16_t)0x0010)            /*!< General Call Address (Slave mode) */
+#define  I2C_SR2_SMBDEFAULT                  ((uint16_t)0x0020)            /*!< SMBus Device Default Address (Slave mode) */
+#define  I2C_SR2_SMBHOST                     ((uint16_t)0x0040)            /*!< SMBus Host Header (Slave mode) */
+#define  I2C_SR2_DUALF                       ((uint16_t)0x0080)            /*!< Dual Flag (Slave mode) */
+#define  I2C_SR2_PEC                         ((uint16_t)0xFF00)            /*!< Packet Error Checking Register */
+
+/*******************  Bit definition for I2C_CCR register  ********************/
+#define  I2C_CCR_CCR                         ((uint16_t)0x0FFF)            /*!< Clock Control Register in Fast/Standard mode (Master mode) */
+#define  I2C_CCR_DUTY                        ((uint16_t)0x4000)            /*!< Fast Mode Duty Cycle */
+#define  I2C_CCR_FS                          ((uint16_t)0x8000)            /*!< I2C Master Mode Selection */
+
+/******************  Bit definition for I2C_TRISE register  *******************/
+#define  I2C_TRISE_TRISE                     ((uint8_t)0x3F)               /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************************************************************************/
+/*                                                                            */
+/*         Universal Synchronous Asynchronous Receiver Transmitter            */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for USART_SR register  *******************/
+#define  USART_SR_PE                         ((uint16_t)0x0001)            /*!< Parity Error */
+#define  USART_SR_FE                         ((uint16_t)0x0002)            /*!< Framing Error */
+#define  USART_SR_NE                         ((uint16_t)0x0004)            /*!< Noise Error Flag */
+#define  USART_SR_ORE                        ((uint16_t)0x0008)            /*!< OverRun Error */
+#define  USART_SR_IDLE                       ((uint16_t)0x0010)            /*!< IDLE line detected */
+#define  USART_SR_RXNE                       ((uint16_t)0x0020)            /*!< Read Data Register Not Empty */
+#define  USART_SR_TC                         ((uint16_t)0x0040)            /*!< Transmission Complete */
+#define  USART_SR_TXE                        ((uint16_t)0x0080)            /*!< Transmit Data Register Empty */
+#define  USART_SR_LBD                        ((uint16_t)0x0100)            /*!< LIN Break Detection Flag */
+#define  USART_SR_CTS                        ((uint16_t)0x0200)            /*!< CTS Flag */
+
+/*******************  Bit definition for USART_DR register  *******************/
+#define  USART_DR_DR                         ((uint16_t)0x01FF)            /*!< Data value */
+
+/******************  Bit definition for USART_BRR register  *******************/
+#define  USART_BRR_DIV_Fraction              ((uint16_t)0x000F)            /*!< Fraction of USARTDIV */
+#define  USART_BRR_DIV_Mantissa              ((uint16_t)0xFFF0)            /*!< Mantissa of USARTDIV */
+
+/******************  Bit definition for USART_CR1 register  *******************/
+#define  USART_CR1_SBK                       ((uint16_t)0x0001)            /*!< Send Break */
+#define  USART_CR1_RWU                       ((uint16_t)0x0002)            /*!< Receiver wakeup */
+#define  USART_CR1_RE                        ((uint16_t)0x0004)            /*!< Receiver Enable */
+#define  USART_CR1_TE                        ((uint16_t)0x0008)            /*!< Transmitter Enable */
+#define  USART_CR1_IDLEIE                    ((uint16_t)0x0010)            /*!< IDLE Interrupt Enable */
+#define  USART_CR1_RXNEIE                    ((uint16_t)0x0020)            /*!< RXNE Interrupt Enable */
+#define  USART_CR1_TCIE                      ((uint16_t)0x0040)            /*!< Transmission Complete Interrupt Enable */
+#define  USART_CR1_TXEIE                     ((uint16_t)0x0080)            /*!< PE Interrupt Enable */
+#define  USART_CR1_PEIE                      ((uint16_t)0x0100)            /*!< PE Interrupt Enable */
+#define  USART_CR1_PS                        ((uint16_t)0x0200)            /*!< Parity Selection */
+#define  USART_CR1_PCE                       ((uint16_t)0x0400)            /*!< Parity Control Enable */
+#define  USART_CR1_WAKE                      ((uint16_t)0x0800)            /*!< Wakeup method */
+#define  USART_CR1_M                         ((uint16_t)0x1000)            /*!< Word length */
+#define  USART_CR1_UE                        ((uint16_t)0x2000)            /*!< USART Enable */
+#define  USART_CR1_OVER8                     ((uint16_t)0x8000)            /*!< USART Oversmapling 8-bits */
+
+/******************  Bit definition for USART_CR2 register  *******************/
+#define  USART_CR2_ADD                       ((uint16_t)0x000F)            /*!< Address of the USART node */
+#define  USART_CR2_LBDL                      ((uint16_t)0x0020)            /*!< LIN Break Detection Length */
+#define  USART_CR2_LBDIE                     ((uint16_t)0x0040)            /*!< LIN Break Detection Interrupt Enable */
+#define  USART_CR2_LBCL                      ((uint16_t)0x0100)            /*!< Last Bit Clock pulse */
+#define  USART_CR2_CPHA                      ((uint16_t)0x0200)            /*!< Clock Phase */
+#define  USART_CR2_CPOL                      ((uint16_t)0x0400)            /*!< Clock Polarity */
+#define  USART_CR2_CLKEN                     ((uint16_t)0x0800)            /*!< Clock Enable */
+
+#define  USART_CR2_STOP                      ((uint16_t)0x3000)            /*!< STOP[1:0] bits (STOP bits) */
+#define  USART_CR2_STOP_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USART_CR2_STOP_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USART_CR2_LINEN                     ((uint16_t)0x4000)            /*!< LIN mode enable */
+
+/******************  Bit definition for USART_CR3 register  *******************/
+#define  USART_CR3_EIE                       ((uint16_t)0x0001)            /*!< Error Interrupt Enable */
+#define  USART_CR3_IREN                      ((uint16_t)0x0002)            /*!< IrDA mode Enable */
+#define  USART_CR3_IRLP                      ((uint16_t)0x0004)            /*!< IrDA Low-Power */
+#define  USART_CR3_HDSEL                     ((uint16_t)0x0008)            /*!< Half-Duplex Selection */
+#define  USART_CR3_NACK                      ((uint16_t)0x0010)            /*!< Smartcard NACK enable */
+#define  USART_CR3_SCEN                      ((uint16_t)0x0020)            /*!< Smartcard mode enable */
+#define  USART_CR3_DMAR                      ((uint16_t)0x0040)            /*!< DMA Enable Receiver */
+#define  USART_CR3_DMAT                      ((uint16_t)0x0080)            /*!< DMA Enable Transmitter */
+#define  USART_CR3_RTSE                      ((uint16_t)0x0100)            /*!< RTS Enable */
+#define  USART_CR3_CTSE                      ((uint16_t)0x0200)            /*!< CTS Enable */
+#define  USART_CR3_CTSIE                     ((uint16_t)0x0400)            /*!< CTS Interrupt Enable */
+#define  USART_CR3_ONEBIT                    ((uint16_t)0x0800)            /*!< One Bit method */
+
+/******************  Bit definition for USART_GTPR register  ******************/
+#define  USART_GTPR_PSC                      ((uint16_t)0x00FF)            /*!< PSC[7:0] bits (Prescaler value) */
+#define  USART_GTPR_PSC_0                    ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  USART_GTPR_PSC_1                    ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  USART_GTPR_PSC_2                    ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  USART_GTPR_PSC_3                    ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  USART_GTPR_PSC_4                    ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  USART_GTPR_PSC_5                    ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  USART_GTPR_PSC_6                    ((uint16_t)0x0040)            /*!< Bit 6 */
+#define  USART_GTPR_PSC_7                    ((uint16_t)0x0080)            /*!< Bit 7 */
+
+#define  USART_GTPR_GT                       ((uint16_t)0xFF00)            /*!< Guard time value */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 Debug MCU                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/****************  Bit definition for DBGMCU_IDCODE register  *****************/
+#define  DBGMCU_IDCODE_DEV_ID                ((uint32_t)0x00000FFF)        /*!< Device Identifier */
+
+#define  DBGMCU_IDCODE_REV_ID                ((uint32_t)0xFFFF0000)        /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define  DBGMCU_IDCODE_REV_ID_0              ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  DBGMCU_IDCODE_REV_ID_1              ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  DBGMCU_IDCODE_REV_ID_2              ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  DBGMCU_IDCODE_REV_ID_3              ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  DBGMCU_IDCODE_REV_ID_4              ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  DBGMCU_IDCODE_REV_ID_5              ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  DBGMCU_IDCODE_REV_ID_6              ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  DBGMCU_IDCODE_REV_ID_7              ((uint32_t)0x00800000)        /*!< Bit 7 */
+#define  DBGMCU_IDCODE_REV_ID_8              ((uint32_t)0x01000000)        /*!< Bit 8 */
+#define  DBGMCU_IDCODE_REV_ID_9              ((uint32_t)0x02000000)        /*!< Bit 9 */
+#define  DBGMCU_IDCODE_REV_ID_10             ((uint32_t)0x04000000)        /*!< Bit 10 */
+#define  DBGMCU_IDCODE_REV_ID_11             ((uint32_t)0x08000000)        /*!< Bit 11 */
+#define  DBGMCU_IDCODE_REV_ID_12             ((uint32_t)0x10000000)        /*!< Bit 12 */
+#define  DBGMCU_IDCODE_REV_ID_13             ((uint32_t)0x20000000)        /*!< Bit 13 */
+#define  DBGMCU_IDCODE_REV_ID_14             ((uint32_t)0x40000000)        /*!< Bit 14 */
+#define  DBGMCU_IDCODE_REV_ID_15             ((uint32_t)0x80000000)        /*!< Bit 15 */
+
+/******************  Bit definition for DBGMCU_CR register  *******************/
+#define  DBGMCU_CR_DBG_SLEEP                 ((uint32_t)0x00000001)        /*!< Debug Sleep Mode */
+#define  DBGMCU_CR_DBG_STOP                  ((uint32_t)0x00000002)        /*!< Debug Stop Mode */
+#define  DBGMCU_CR_DBG_STANDBY               ((uint32_t)0x00000004)        /*!< Debug Standby mode */
+#define  DBGMCU_CR_TRACE_IOEN                ((uint32_t)0x00000020)        /*!< Trace Pin Assignment Control */
+
+#define  DBGMCU_CR_TRACE_MODE                ((uint32_t)0x000000C0)        /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */
+#define  DBGMCU_CR_TRACE_MODE_0              ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  DBGMCU_CR_TRACE_MODE_1              ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  DBGMCU_CR_DBG_IWDG_STOP             ((uint32_t)0x00000100)        /*!< Debug Independent Watchdog stopped when Core is halted */
+#define  DBGMCU_CR_DBG_WWDG_STOP             ((uint32_t)0x00000200)        /*!< Debug Window Watchdog stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM1_STOP             ((uint32_t)0x00000400)        /*!< TIM1 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM2_STOP             ((uint32_t)0x00000800)        /*!< TIM2 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM3_STOP             ((uint32_t)0x00001000)        /*!< TIM3 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM4_STOP             ((uint32_t)0x00002000)        /*!< TIM4 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_CAN1_STOP             ((uint32_t)0x00004000)        /*!< Debug CAN1 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT    ((uint32_t)0x00008000)        /*!< SMBUS timeout mode stopped when Core is halted */
+#define  DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT    ((uint32_t)0x00010000)        /*!< SMBUS timeout mode stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM8_STOP             ((uint32_t)0x00020000)        /*!< TIM8 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM5_STOP             ((uint32_t)0x00040000)        /*!< TIM5 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM6_STOP             ((uint32_t)0x00080000)        /*!< TIM6 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM7_STOP             ((uint32_t)0x00100000)        /*!< TIM7 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_CAN2_STOP             ((uint32_t)0x00200000)        /*!< Debug CAN2 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM15_STOP            ((uint32_t)0x00400000)        /*!< Debug TIM15 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM16_STOP            ((uint32_t)0x00800000)        /*!< Debug TIM16 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM17_STOP            ((uint32_t)0x01000000)        /*!< Debug TIM17 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM12_STOP            ((uint32_t)0x02000000)        /*!< Debug TIM12 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM13_STOP            ((uint32_t)0x04000000)        /*!< Debug TIM13 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM14_STOP            ((uint32_t)0x08000000)        /*!< Debug TIM14 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM9_STOP             ((uint32_t)0x10000000)        /*!< Debug TIM9 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM10_STOP            ((uint32_t)0x20000000)        /*!< Debug TIM10 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM11_STOP            ((uint32_t)0x40000000)        /*!< Debug TIM11 stopped when Core is halted */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      FLASH and Option Bytes Registers                      */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for FLASH_ACR register  ******************/
+#define  FLASH_ACR_LATENCY                   ((uint8_t)0x07)               /*!< LATENCY[2:0] bits (Latency) */
+#define  FLASH_ACR_LATENCY_0                 ((uint8_t)0x00)               /*!< Bit 0 */
+#define  FLASH_ACR_LATENCY_1                 ((uint8_t)0x01)               /*!< Bit 0 */
+#define  FLASH_ACR_LATENCY_2                 ((uint8_t)0x02)               /*!< Bit 1 */
+
+#define  FLASH_ACR_HLFCYA                    ((uint8_t)0x08)               /*!< Flash Half Cycle Access Enable */
+#define  FLASH_ACR_PRFTBE                    ((uint8_t)0x10)               /*!< Prefetch Buffer Enable */
+#define  FLASH_ACR_PRFTBS                    ((uint8_t)0x20)               /*!< Prefetch Buffer Status */
+
+/******************  Bit definition for FLASH_KEYR register  ******************/
+#define  FLASH_KEYR_FKEYR                    ((uint32_t)0xFFFFFFFF)        /*!< FPEC Key */
+
+/******************  FLASH Keys  **********************************************/
+#define RDP_Key                  ((uint16_t)0x00A5)
+#define FLASH_KEY1               ((uint32_t)0x45670123)
+#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)
+
+/*****************  Bit definition for FLASH_OPTKEYR register  ****************/
+#define  FLASH_OPTKEYR_OPTKEYR               ((uint32_t)0xFFFFFFFF)        /*!< Option Byte Key */
+
+/******************  Bit definition for FLASH_SR register  *******************/
+#define  FLASH_SR_BSY                        ((uint8_t)0x01)               /*!< Busy */
+#define  FLASH_SR_PGERR                      ((uint8_t)0x04)               /*!< Programming Error */
+#define  FLASH_SR_WRPRTERR                   ((uint8_t)0x10)               /*!< Write Protection Error */
+#define  FLASH_SR_EOP                        ((uint8_t)0x20)               /*!< End of operation */
+
+/*******************  Bit definition for FLASH_CR register  *******************/
+#define  FLASH_CR_PG                         ((uint16_t)0x0001)            /*!< Programming */
+#define  FLASH_CR_PER                        ((uint16_t)0x0002)            /*!< Page Erase */
+#define  FLASH_CR_MER                        ((uint16_t)0x0004)            /*!< Mass Erase */
+#define  FLASH_CR_OPTPG                      ((uint16_t)0x0010)            /*!< Option Byte Programming */
+#define  FLASH_CR_OPTER                      ((uint16_t)0x0020)            /*!< Option Byte Erase */
+#define  FLASH_CR_STRT                       ((uint16_t)0x0040)            /*!< Start */
+#define  FLASH_CR_LOCK                       ((uint16_t)0x0080)            /*!< Lock */
+#define  FLASH_CR_OPTWRE                     ((uint16_t)0x0200)            /*!< Option Bytes Write Enable */
+#define  FLASH_CR_ERRIE                      ((uint16_t)0x0400)            /*!< Error Interrupt Enable */
+#define  FLASH_CR_EOPIE                      ((uint16_t)0x1000)            /*!< End of operation interrupt enable */
+
+/*******************  Bit definition for FLASH_AR register  *******************/
+#define  FLASH_AR_FAR                        ((uint32_t)0xFFFFFFFF)        /*!< Flash Address */
+
+/******************  Bit definition for FLASH_OBR register  *******************/
+#define  FLASH_OBR_OPTERR                    ((uint16_t)0x0001)            /*!< Option Byte Error */
+#define  FLASH_OBR_RDPRT                     ((uint16_t)0x0002)            /*!< Read protection */
+
+#define  FLASH_OBR_USER                      ((uint16_t)0x03FC)            /*!< User Option Bytes */
+#define  FLASH_OBR_WDG_SW                    ((uint16_t)0x0004)            /*!< WDG_SW */
+#define  FLASH_OBR_nRST_STOP                 ((uint16_t)0x0008)            /*!< nRST_STOP */
+#define  FLASH_OBR_nRST_STDBY                ((uint16_t)0x0010)            /*!< nRST_STDBY */
+#define  FLASH_OBR_BFB2                      ((uint16_t)0x0020)            /*!< BFB2 */
+
+/******************  Bit definition for FLASH_WRPR register  ******************/
+#define  FLASH_WRPR_WRP                        ((uint32_t)0xFFFFFFFF)        /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/******************  Bit definition for FLASH_RDP register  *******************/
+#define  FLASH_RDP_RDP                       ((uint32_t)0x000000FF)        /*!< Read protection option byte */
+#define  FLASH_RDP_nRDP                      ((uint32_t)0x0000FF00)        /*!< Read protection complemented option byte */
+
+/******************  Bit definition for FLASH_USER register  ******************/
+#define  FLASH_USER_USER                     ((uint32_t)0x00FF0000)        /*!< User option byte */
+#define  FLASH_USER_nUSER                    ((uint32_t)0xFF000000)        /*!< User complemented option byte */
+
+/******************  Bit definition for FLASH_Data0 register  *****************/
+#define  FLASH_Data0_Data0                   ((uint32_t)0x000000FF)        /*!< User data storage option byte */
+#define  FLASH_Data0_nData0                  ((uint32_t)0x0000FF00)        /*!< User data storage complemented option byte */
+
+/******************  Bit definition for FLASH_Data1 register  *****************/
+#define  FLASH_Data1_Data1                   ((uint32_t)0x00FF0000)        /*!< User data storage option byte */
+#define  FLASH_Data1_nData1                  ((uint32_t)0xFF000000)        /*!< User data storage complemented option byte */
+
+/******************  Bit definition for FLASH_WRP0 register  ******************/
+#define  FLASH_WRP0_WRP0                     ((uint32_t)0x000000FF)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP0_nWRP0                    ((uint32_t)0x0000FF00)        /*!< Flash memory write protection complemented option bytes */
+
+/******************  Bit definition for FLASH_WRP1 register  ******************/
+#define  FLASH_WRP1_WRP1                     ((uint32_t)0x00FF0000)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP1_nWRP1                    ((uint32_t)0xFF000000)        /*!< Flash memory write protection complemented option bytes */
+
+/******************  Bit definition for FLASH_WRP2 register  ******************/
+#define  FLASH_WRP2_WRP2                     ((uint32_t)0x000000FF)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP2_nWRP2                    ((uint32_t)0x0000FF00)        /*!< Flash memory write protection complemented option bytes */
+
+/******************  Bit definition for FLASH_WRP3 register  ******************/
+#define  FLASH_WRP3_WRP3                     ((uint32_t)0x00FF0000)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP3_nWRP3                    ((uint32_t)0xFF000000)        /*!< Flash memory write protection complemented option bytes */
+
+#ifdef STM32F10X_CL
+/******************************************************************************/
+/*                Ethernet MAC Registers bits definitions                     */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD      ((uint32_t)0x00800000)  /* Watchdog disable */
+#define ETH_MACCR_JD      ((uint32_t)0x00400000)  /* Jabber disable */
+#define ETH_MACCR_IFG     ((uint32_t)0x000E0000)  /* Inter-frame gap */
+  #define ETH_MACCR_IFG_96Bit     ((uint32_t)0x00000000)  /* Minimum IFG between frames during transmission is 96Bit */
+  #define ETH_MACCR_IFG_88Bit     ((uint32_t)0x00020000)  /* Minimum IFG between frames during transmission is 88Bit */
+  #define ETH_MACCR_IFG_80Bit     ((uint32_t)0x00040000)  /* Minimum IFG between frames during transmission is 80Bit */
+  #define ETH_MACCR_IFG_72Bit     ((uint32_t)0x00060000)  /* Minimum IFG between frames during transmission is 72Bit */
+  #define ETH_MACCR_IFG_64Bit     ((uint32_t)0x00080000)  /* Minimum IFG between frames during transmission is 64Bit */        
+  #define ETH_MACCR_IFG_56Bit     ((uint32_t)0x000A0000)  /* Minimum IFG between frames during transmission is 56Bit */
+  #define ETH_MACCR_IFG_48Bit     ((uint32_t)0x000C0000)  /* Minimum IFG between frames during transmission is 48Bit */
+  #define ETH_MACCR_IFG_40Bit     ((uint32_t)0x000E0000)  /* Minimum IFG between frames during transmission is 40Bit */              
+#define ETH_MACCR_CSD     ((uint32_t)0x00010000)  /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES     ((uint32_t)0x00004000)  /* Fast ethernet speed */
+#define ETH_MACCR_ROD     ((uint32_t)0x00002000)  /* Receive own disable */
+#define ETH_MACCR_LM      ((uint32_t)0x00001000)  /* loopback mode */
+#define ETH_MACCR_DM      ((uint32_t)0x00000800)  /* Duplex mode */
+#define ETH_MACCR_IPCO    ((uint32_t)0x00000400)  /* IP Checksum offload */
+#define ETH_MACCR_RD      ((uint32_t)0x00000200)  /* Retry disable */
+#define ETH_MACCR_APCS    ((uint32_t)0x00000080)  /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL      ((uint32_t)0x00000060)  /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+                                                       a transmission attempt during retries after a collision: 0 =< r <2^k */
+  #define ETH_MACCR_BL_10    ((uint32_t)0x00000000)  /* k = min (n, 10) */
+  #define ETH_MACCR_BL_8     ((uint32_t)0x00000020)  /* k = min (n, 8) */
+  #define ETH_MACCR_BL_4     ((uint32_t)0x00000040)  /* k = min (n, 4) */
+  #define ETH_MACCR_BL_1     ((uint32_t)0x00000060)  /* k = min (n, 1) */ 
+#define ETH_MACCR_DC      ((uint32_t)0x00000010)  /* Defferal check */
+#define ETH_MACCR_TE      ((uint32_t)0x00000008)  /* Transmitter enable */
+#define ETH_MACCR_RE      ((uint32_t)0x00000004)  /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA     ((uint32_t)0x80000000)  /* Receive all */ 
+#define ETH_MACFFR_HPF    ((uint32_t)0x00000400)  /* Hash or perfect filter */ 
+#define ETH_MACFFR_SAF    ((uint32_t)0x00000200)  /* Source address filter enable */ 
+#define ETH_MACFFR_SAIF   ((uint32_t)0x00000100)  /* SA inverse filtering */ 
+#define ETH_MACFFR_PCF    ((uint32_t)0x000000C0)  /* Pass control frames: 3 cases */
+  #define ETH_MACFFR_PCF_BlockAll                ((uint32_t)0x00000040)  /* MAC filters all control frames from reaching the application */
+  #define ETH_MACFFR_PCF_ForwardAll              ((uint32_t)0x00000080)  /* MAC forwards all control frames to application even if they fail the Address Filter */
+  #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0)  /* MAC forwards control frames that pass the Address Filter. */ 
+#define ETH_MACFFR_BFD    ((uint32_t)0x00000020)  /* Broadcast frame disable */ 
+#define ETH_MACFFR_PAM 	  ((uint32_t)0x00000010)  /* Pass all mutlicast */ 
+#define ETH_MACFFR_DAIF   ((uint32_t)0x00000008)  /* DA Inverse filtering */ 
+#define ETH_MACFFR_HM     ((uint32_t)0x00000004)  /* Hash multicast */ 
+#define ETH_MACFFR_HU     ((uint32_t)0x00000002)  /* Hash unicast */
+#define ETH_MACFFR_PM     ((uint32_t)0x00000001)  /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH   ((uint32_t)0xFFFFFFFF)  /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL   ((uint32_t)0xFFFFFFFF)  /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA   ((uint32_t)0x0000F800)  /* Physical layer address */ 
+#define ETH_MACMIIAR_MR   ((uint32_t)0x000007C0)  /* MII register in the selected PHY */ 
+#define ETH_MACMIIAR_CR   ((uint32_t)0x0000001C)  /* CR clock range: 6 cases */ 
+  #define ETH_MACMIIAR_CR_Div42   ((uint32_t)0x00000000)  /* HCLK:60-72 MHz; MDC clock= HCLK/42 */
+  #define ETH_MACMIIAR_CR_Div16   ((uint32_t)0x00000008)  /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+  #define ETH_MACMIIAR_CR_Div26   ((uint32_t)0x0000000C)  /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+#define ETH_MACMIIAR_MW   ((uint32_t)0x00000002)  /* MII write */ 
+#define ETH_MACMIIAR_MB   ((uint32_t)0x00000001)  /* MII busy */ 
+  
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD   ((uint32_t)0x0000FFFF)  /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT     ((uint32_t)0xFFFF0000)  /* Pause time */
+#define ETH_MACFCR_ZQPD   ((uint32_t)0x00000080)  /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT    ((uint32_t)0x00000030)  /* Pause low threshold: 4 cases */
+  #define ETH_MACFCR_PLT_Minus4   ((uint32_t)0x00000000)  /* Pause time minus 4 slot times */
+  #define ETH_MACFCR_PLT_Minus28  ((uint32_t)0x00000010)  /* Pause time minus 28 slot times */
+  #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020)  /* Pause time minus 144 slot times */
+  #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030)  /* Pause time minus 256 slot times */      
+#define ETH_MACFCR_UPFD   ((uint32_t)0x00000008)  /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE   ((uint32_t)0x00000004)  /* Receive flow control enable */
+#define ETH_MACFCR_TFCE   ((uint32_t)0x00000002)  /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001)  /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000)  /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF)  /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ 
+#define ETH_MACRWUFFR_D   ((uint32_t)0xFFFFFFFF)  /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+   Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+   Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+   Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+   Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+   Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - 
+                              RSVD - Filter1 Command - RSVD - Filter0 Command
+   Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+   Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+   Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */ 
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000)  /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU     ((uint32_t)0x00000200)  /* Global Unicast */
+#define ETH_MACPMTCSR_WFR    ((uint32_t)0x00000040)  /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR    ((uint32_t)0x00000020)  /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE    ((uint32_t)0x00000004)  /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE    ((uint32_t)0x00000002)  /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD     ((uint32_t)0x00000001)  /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS      ((uint32_t)0x00000200)  /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS     ((uint32_t)0x00000040)  /* MMC transmit status */
+#define ETH_MACSR_MMMCRS    ((uint32_t)0x00000020)  /* MMC receive status */
+#define ETH_MACSR_MMCS      ((uint32_t)0x00000010)  /* MMC status */
+#define ETH_MACSR_PMTS      ((uint32_t)0x00000008)  /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM     ((uint32_t)0x00000200)  /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM     ((uint32_t)0x00000008)  /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H   ((uint32_t)0x0000FFFF)  /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L   ((uint32_t)0xFFFFFFFF)  /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA1HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA1HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+  #define ETH_MACA1HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA1HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA1HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA1HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [7:0] */ 
+#define ETH_MACA1HR_MACA1H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L   ((uint32_t)0xFFFFFFFF)  /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA2HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA2HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA2HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA2HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA2HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA2HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L   ((uint32_t)0xFFFFFFFF)  /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA3HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA3HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA3HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA3HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA3HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA3HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H   ((uint32_t)0x0000FFFF)  /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L   ((uint32_t)0xFFFFFFFF)  /* MAC address3 low */
+
+/******************************************************************************/
+/*                Ethernet MMC Registers bits definition                      */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCF        ((uint32_t)0x00000008)  /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR        ((uint32_t)0x00000004)  /* Reset on Read */
+#define ETH_MMCCR_CSR        ((uint32_t)0x00000002)  /* Counter Stop Rollover */
+#define ETH_MMCCR_CR         ((uint32_t)0x00000001)  /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS     ((uint32_t)0x00020000)  /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES     ((uint32_t)0x00000040)  /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES     ((uint32_t)0x00000020)  /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS      ((uint32_t)0x00200000)  /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS   ((uint32_t)0x00008000)  /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS    ((uint32_t)0x00004000)  /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM    ((uint32_t)0x00020000)  /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM    ((uint32_t)0x00000040)  /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM    ((uint32_t)0x00000020)  /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM     ((uint32_t)0x00200000)  /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM  ((uint32_t)0x00008000)  /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM   ((uint32_t)0x00004000)  /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC     ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC   ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC    ((uint32_t)0xFFFFFFFF)  /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC  ((uint32_t)0xFFFFFFFF)  /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/*               Ethernet PTP Registers bits definition                       */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSARU    ((uint32_t)0x00000020)  /* Addend register update */
+#define ETH_PTPTSCR_TSITE    ((uint32_t)0x00000010)  /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU    ((uint32_t)0x00000008)  /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI    ((uint32_t)0x00000004)  /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU    ((uint32_t)0x00000002)  /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE      ((uint32_t)0x00000001)  /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI    ((uint32_t)0x000000FF)  /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS      ((uint32_t)0xFFFFFFFF)  /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS    ((uint32_t)0x80000000)  /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS     ((uint32_t)0x7FFFFFFF)  /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS    ((uint32_t)0xFFFFFFFF)  /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS  ((uint32_t)0x80000000)  /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS   ((uint32_t)0x7FFFFFFF)  /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA      ((uint32_t)0xFFFFFFFF)  /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH     ((uint32_t)0xFFFFFFFF)  /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL     ((uint32_t)0xFFFFFFFF)  /* Target time stamp low */
+
+/******************************************************************************/
+/*                 Ethernet DMA Registers bits definition                     */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB       ((uint32_t)0x02000000)  /* Address-Aligned beats */
+#define ETH_DMABMR_FPM        ((uint32_t)0x01000000)  /* 4xPBL mode */
+#define ETH_DMABMR_USP       ((uint32_t)0x00800000)  /* Use separate PBL */
+#define ETH_DMABMR_RDP       ((uint32_t)0x007E0000)  /* RxDMA PBL */
+  #define ETH_DMABMR_RDP_1Beat    ((uint32_t)0x00020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+  #define ETH_DMABMR_RDP_2Beat    ((uint32_t)0x00040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+  #define ETH_DMABMR_RDP_4Beat    ((uint32_t)0x00080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_8Beat    ((uint32_t)0x00100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_16Beat   ((uint32_t)0x00200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_32Beat   ((uint32_t)0x00400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */                
+  #define ETH_DMABMR_RDP_4xPBL_4Beat   ((uint32_t)0x01020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_4xPBL_8Beat   ((uint32_t)0x01040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_4xPBL_16Beat  ((uint32_t)0x01080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_4xPBL_32Beat  ((uint32_t)0x01100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+  #define ETH_DMABMR_RDP_4xPBL_64Beat  ((uint32_t)0x01200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+  #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 128 */  
+#define ETH_DMABMR_FB        ((uint32_t)0x00010000)  /* Fixed Burst */
+#define ETH_DMABMR_RTPR      ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_1_1     ((uint32_t)0x00000000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_2_1     ((uint32_t)0x00004000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_3_1     ((uint32_t)0x00008000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_4_1     ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */  
+#define ETH_DMABMR_PBL    ((uint32_t)0x00003F00)  /* Programmable burst length */
+  #define ETH_DMABMR_PBL_1Beat    ((uint32_t)0x00000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+  #define ETH_DMABMR_PBL_2Beat    ((uint32_t)0x00000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+  #define ETH_DMABMR_PBL_4Beat    ((uint32_t)0x00000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_8Beat    ((uint32_t)0x00000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_16Beat   ((uint32_t)0x00001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_32Beat   ((uint32_t)0x00002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */                
+  #define ETH_DMABMR_PBL_4xPBL_4Beat   ((uint32_t)0x01000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_4xPBL_8Beat   ((uint32_t)0x01000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_4xPBL_16Beat  ((uint32_t)0x01000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_4xPBL_32Beat  ((uint32_t)0x01000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+  #define ETH_DMABMR_PBL_4xPBL_64Beat  ((uint32_t)0x01001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+  #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_DSL       ((uint32_t)0x0000007C)  /* Descriptor Skip Length */
+#define ETH_DMABMR_DA        ((uint32_t)0x00000002)  /* DMA arbitration scheme */
+#define ETH_DMABMR_SR        ((uint32_t)0x00000001)  /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD      ((uint32_t)0xFFFFFFFF)  /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD      ((uint32_t)0xFFFFFFFF)  /* Receive poll demand  */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL     ((uint32_t)0xFFFFFFFF)  /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL     ((uint32_t)0xFFFFFFFF)  /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS       ((uint32_t)0x20000000)  /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS       ((uint32_t)0x10000000)  /* PMT status */
+#define ETH_DMASR_MMCS       ((uint32_t)0x08000000)  /* MMC status */
+#define ETH_DMASR_EBS        ((uint32_t)0x03800000)  /* Error bits status */
+  /* combination with EBS[2:0] for GetFlagStatus function */
+  #define ETH_DMASR_EBS_DescAccess      ((uint32_t)0x02000000)  /* Error bits 0-data buffer, 1-desc. access */
+  #define ETH_DMASR_EBS_ReadTransf      ((uint32_t)0x01000000)  /* Error bits 0-write trnsf, 1-read transfr */
+  #define ETH_DMASR_EBS_DataTransfTx    ((uint32_t)0x00800000)  /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS         ((uint32_t)0x00700000)  /* Transmit process state */
+  #define ETH_DMASR_TPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Tx Command issued  */
+  #define ETH_DMASR_TPS_Fetching        ((uint32_t)0x00100000)  /* Running - fetching the Tx descriptor */
+  #define ETH_DMASR_TPS_Waiting         ((uint32_t)0x00200000)  /* Running - waiting for status */
+  #define ETH_DMASR_TPS_Reading         ((uint32_t)0x00300000)  /* Running - reading the data from host memory */
+  #define ETH_DMASR_TPS_Suspended       ((uint32_t)0x00600000)  /* Suspended - Tx Descriptor unavailabe */
+  #define ETH_DMASR_TPS_Closing         ((uint32_t)0x00700000)  /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS         ((uint32_t)0x000E0000)  /* Receive process state */
+  #define ETH_DMASR_RPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Rx Command issued */
+  #define ETH_DMASR_RPS_Fetching        ((uint32_t)0x00020000)  /* Running - fetching the Rx descriptor */
+  #define ETH_DMASR_RPS_Waiting         ((uint32_t)0x00060000)  /* Running - waiting for packet */
+  #define ETH_DMASR_RPS_Suspended       ((uint32_t)0x00080000)  /* Suspended - Rx Descriptor unavailable */
+  #define ETH_DMASR_RPS_Closing         ((uint32_t)0x000A0000)  /* Running - closing descriptor */
+  #define ETH_DMASR_RPS_Queuing         ((uint32_t)0x000E0000)  /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS        ((uint32_t)0x00010000)  /* Normal interrupt summary */
+#define ETH_DMASR_AIS        ((uint32_t)0x00008000)  /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS        ((uint32_t)0x00004000)  /* Early receive status */
+#define ETH_DMASR_FBES       ((uint32_t)0x00002000)  /* Fatal bus error status */
+#define ETH_DMASR_ETS        ((uint32_t)0x00000400)  /* Early transmit status */
+#define ETH_DMASR_RWTS       ((uint32_t)0x00000200)  /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS       ((uint32_t)0x00000100)  /* Receive process stopped status */
+#define ETH_DMASR_RBUS       ((uint32_t)0x00000080)  /* Receive buffer unavailable status */
+#define ETH_DMASR_RS         ((uint32_t)0x00000040)  /* Receive status */
+#define ETH_DMASR_TUS        ((uint32_t)0x00000020)  /* Transmit underflow status */
+#define ETH_DMASR_ROS        ((uint32_t)0x00000010)  /* Receive overflow status */
+#define ETH_DMASR_TJTS       ((uint32_t)0x00000008)  /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS       ((uint32_t)0x00000004)  /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS       ((uint32_t)0x00000002)  /* Transmit process stopped status */
+#define ETH_DMASR_TS         ((uint32_t)0x00000001)  /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD    ((uint32_t)0x04000000)  /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF       ((uint32_t)0x02000000)  /* Receive store and forward */
+#define ETH_DMAOMR_DFRF      ((uint32_t)0x01000000)  /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF       ((uint32_t)0x00200000)  /* Transmit store and forward */
+#define ETH_DMAOMR_FTF       ((uint32_t)0x00100000)  /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC       ((uint32_t)0x0001C000)  /* Transmit threshold control */
+  #define ETH_DMAOMR_TTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+  #define ETH_DMAOMR_TTC_128Bytes      ((uint32_t)0x00004000)  /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+  #define ETH_DMAOMR_TTC_192Bytes      ((uint32_t)0x00008000)  /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+  #define ETH_DMAOMR_TTC_256Bytes      ((uint32_t)0x0000C000)  /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+  #define ETH_DMAOMR_TTC_40Bytes       ((uint32_t)0x00010000)  /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+  #define ETH_DMAOMR_TTC_32Bytes       ((uint32_t)0x00014000)  /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+  #define ETH_DMAOMR_TTC_24Bytes       ((uint32_t)0x00018000)  /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+  #define ETH_DMAOMR_TTC_16Bytes       ((uint32_t)0x0001C000)  /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST        ((uint32_t)0x00002000)  /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF       ((uint32_t)0x00000080)  /* Forward error frames */
+#define ETH_DMAOMR_FUGF      ((uint32_t)0x00000040)  /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC       ((uint32_t)0x00000018)  /* receive threshold control */
+  #define ETH_DMAOMR_RTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Receive FIFO is 64 Bytes */
+  #define ETH_DMAOMR_RTC_32Bytes       ((uint32_t)0x00000008)  /* threshold level of the MTL Receive FIFO is 32 Bytes */
+  #define ETH_DMAOMR_RTC_96Bytes       ((uint32_t)0x00000010)  /* threshold level of the MTL Receive FIFO is 96 Bytes */
+  #define ETH_DMAOMR_RTC_128Bytes      ((uint32_t)0x00000018)  /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF       ((uint32_t)0x00000004)  /* operate on second frame */
+#define ETH_DMAOMR_SR        ((uint32_t)0x00000002)  /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE      ((uint32_t)0x00010000)  /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE      ((uint32_t)0x00008000)  /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE      ((uint32_t)0x00004000)  /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE     ((uint32_t)0x00002000)  /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE      ((uint32_t)0x00000400)  /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE     ((uint32_t)0x00000200)  /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE     ((uint32_t)0x00000100)  /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE     ((uint32_t)0x00000080)  /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE       ((uint32_t)0x00000040)  /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE      ((uint32_t)0x00000020)  /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE      ((uint32_t)0x00000010)  /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE     ((uint32_t)0x00000008)  /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE     ((uint32_t)0x00000004)  /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE     ((uint32_t)0x00000002)  /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE       ((uint32_t)0x00000001)  /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC   ((uint32_t)0x10000000)  /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA    ((uint32_t)0x0FFE0000)  /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC   ((uint32_t)0x00010000)  /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC    ((uint32_t)0x0000FFFF)  /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP   ((uint32_t)0xFFFFFFFF)  /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP   ((uint32_t)0xFFFFFFFF)  /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP  ((uint32_t)0xFFFFFFFF)  /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP  ((uint32_t)0xFFFFFFFF)  /* Host receive buffer address pointer */
+#endif /* STM32F10X_CL */
+
+/**
+  * @}
+  */
+
+ /**
+  * @}
+  */ 
+
+#ifdef USE_STDPERIPH_DRIVER
+  #include "stm32f10x_conf.h"
+#endif
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F10x_H */
+
+/**
+  * @}
+  */
+
+  /**
+  * @}
+  */
+

project_Template/Libraries/CMSIS/stm32f10x_conf.h

@@ -0,0 +1,75 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F10x_StdPeriph_Template/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.6.0
+  * @date    20-September-2021
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2011 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+

project_Template/Libraries/CMSIS/stm32f10x_it.c

@@ -0,0 +1,158 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F10x_StdPeriph_Template/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.6.0
+  * @date    20-September-2021
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and 
+  *          peripherals interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2011 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Template
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles PendSVC exception.
+  * @param  None
+  * @retval None
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+void SysTick_Handler(void)
+{
+}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles PPP interrupt request.
+  * @param  None
+  * @retval None
+  */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+  * @}
+  */ 
+
+

project_Template/Libraries/CMSIS/stm32f10x_it.h

@@ -0,0 +1,52 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F10x_StdPeriph_Template/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.6.0
+  * @date    20-September-2021
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2011 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IT_H */
+

project_Template/Libraries/CMSIS/system_stm32f10x.c

@@ -0,0 +1,1092 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.c
+  * @author  MCD Application Team
+  * @version V3.5.1
+  * @date    08-September-2021
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f10x_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. If the system clock source selected by user fails to startup, the SystemInit()
+  *    function will do nothing and HSI still used as system clock source. User can 
+  *    add some code to deal with this issue inside the SetSysClock() function.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2011 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F10x_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f10x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+  * @{
+  */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+   frequency (after reset the HSI is used as SYSCLK source)
+   
+   IMPORTANT NOTE:
+   ============== 
+   1. After each device reset the HSI is used as System clock source.
+
+   2. Please make sure that the selected System clock doesn't exceed your device's
+      maximum frequency.
+      
+   3. If none of the define below is enabled, the HSI is used as System clock
+    source.
+
+   4. The System clock configuration functions provided within this file assume that:
+        - For Low, Medium and High density Value line devices an external 8MHz 
+          crystal is used to drive the System clock.
+        - For Low, Medium and High density devices an external 8MHz crystal is
+          used to drive the System clock.
+        - For Connectivity line devices an external 25MHz crystal is used to drive
+          the System clock.
+     If you are using different crystal you have to adapt those functions accordingly.
+    */
+    
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz  24000000
+#else
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz  24000000 */ 
+/* #define SYSCLK_FREQ_36MHz  36000000 */
+/* #define SYSCLK_FREQ_48MHz  48000000 */
+/* #define SYSCLK_FREQ_56MHz  56000000 */
+#define SYSCLK_FREQ_72MHz  72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
+     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+  * @{
+  */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+  static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+  static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+  static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+  static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+  static void SetSysClockTo56(void);  
+#elif defined SYSCLK_FREQ_72MHz
+  static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+    
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+  /* Configure the Flash Latency cycles and enable prefetch buffer */
+  SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+/**
+  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+  SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+  SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+  SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+  SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+  SetSysClockTo56();  
+#elif defined SYSCLK_FREQ_72MHz
+  SetSysClockTo72();
+#endif
+ 
+ /* If none of the define above is enabled, the HSI is used as System clock
+    source (default after reset) */ 
+}
+
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
+  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+  required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114;
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
+  RCC->APB2ENR = 0x000001E0;
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BB;  
+  GPIOD->CRH = 0xBBBBBBBB;
+
+  GPIOE->CRL = 0xB44444BB;  
+  GPIOE->CRH = 0xBBBBBBBB;
+
+  GPIOF->CRL = 0x44BBBBBB;  
+  GPIOF->CRH = 0xBBBB4444;
+
+  GPIOG->CRL = 0x44BBBBBB;  
+  GPIOG->CRH = 0x44444B44;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4] = 0x00001011;
+  FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
+  *         and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockToHSE(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+    if (HSE_VALUE <= 24000000)
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+	}
+	else
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+	}
+#endif /* STM32F10X_CL */
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+    /* Select HSE as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
+
+    /* Wait till HSE is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }  
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
+  *         and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo24(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }   
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else    
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
+  *         and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo36(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+
+	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+#else    
+    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
+  *         and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo48(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
+  *         and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo56(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL7); 
+#else     
+    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
+  *         and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo72(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+                                        RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+    
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    

project_Template/Libraries/CMSIS/system_stm32f10x.h

@@ -0,0 +1,96 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @version V3.5.1
+  * @date    08-September-2021
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2011 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  

project_Template/Libraries/FWlib/inc/misc.h

@@ -0,0 +1,218 @@
+/**
+  ******************************************************************************
+  * @file    misc.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the miscellaneous
+  *          firmware library functions (add-on to CMSIS functions).
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MISC_H
+#define __MISC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup MISC
+  * @{
+  */
+
+/** @defgroup MISC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  NVIC Init Structure definition  
+  */
+
+typedef struct
+{
+  uint8_t NVIC_IRQChannel;                    /*!< Specifies the IRQ channel to be enabled or disabled.
+                                                   This parameter can be a value of @ref IRQn_Type 
+                                                   (For the complete STM32 Devices IRQ Channels list, please
+                                                    refer to stm32f10x.h file) */
+
+  uint8_t NVIC_IRQChannelPreemptionPriority;  /*!< Specifies the pre-emption priority for the IRQ channel
+                                                   specified in NVIC_IRQChannel. This parameter can be a value
+                                                   between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+  uint8_t NVIC_IRQChannelSubPriority;         /*!< Specifies the subpriority level for the IRQ channel specified
+                                                   in NVIC_IRQChannel. This parameter can be a value
+                                                   between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+  FunctionalState NVIC_IRQChannelCmd;         /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
+                                                   will be enabled or disabled. 
+                                                   This parameter can be set either to ENABLE or DISABLE */   
+} NVIC_InitTypeDef;
+ 
+/**
+  * @}
+  */
+
+/** @defgroup NVIC_Priority_Table 
+  * @{
+  */
+
+/**
+@code  
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+  ============================================================================================================================
+    NVIC_PriorityGroup   | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority  | Description
+  ============================================================================================================================
+   NVIC_PriorityGroup_0  |                0                  |            0-15             |   0 bits for pre-emption priority
+                         |                                   |                             |   4 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------
+   NVIC_PriorityGroup_1  |                0-1                |            0-7              |   1 bits for pre-emption priority
+                         |                                   |                             |   3 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------    
+   NVIC_PriorityGroup_2  |                0-3                |            0-3              |   2 bits for pre-emption priority
+                         |                                   |                             |   2 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------    
+   NVIC_PriorityGroup_3  |                0-7                |            0-1              |   3 bits for pre-emption priority
+                         |                                   |                             |   1 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------    
+   NVIC_PriorityGroup_4  |                0-15               |            0                |   4 bits for pre-emption priority
+                         |                                   |                             |   0 bits for subpriority                       
+  ============================================================================================================================
+@endcode
+*/
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup Vector_Table_Base 
+  * @{
+  */
+
+#define NVIC_VectTab_RAM             ((uint32_t)0x20000000)
+#define NVIC_VectTab_FLASH           ((uint32_t)0x08000000)
+#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
+                                  ((VECTTAB) == NVIC_VectTab_FLASH))
+/**
+  * @}
+  */
+
+/** @defgroup System_Low_Power 
+  * @{
+  */
+
+#define NVIC_LP_SEVONPEND            ((uint8_t)0x10)
+#define NVIC_LP_SLEEPDEEP            ((uint8_t)0x04)
+#define NVIC_LP_SLEEPONEXIT          ((uint8_t)0x02)
+#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
+                        ((LP) == NVIC_LP_SLEEPDEEP) || \
+                        ((LP) == NVIC_LP_SLEEPONEXIT))
+/**
+  * @}
+  */
+
+/** @defgroup Preemption_Priority_Group 
+  * @{
+  */
+
+#define NVIC_PriorityGroup_0         ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
+                                                            4 bits for subpriority */
+#define NVIC_PriorityGroup_1         ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
+                                                            3 bits for subpriority */
+#define NVIC_PriorityGroup_2         ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
+                                                            2 bits for subpriority */
+#define NVIC_PriorityGroup_3         ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
+                                                            1 bits for subpriority */
+#define NVIC_PriorityGroup_4         ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
+                                                            0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
+                                       ((GROUP) == NVIC_PriorityGroup_1) || \
+                                       ((GROUP) == NVIC_PriorityGroup_2) || \
+                                       ((GROUP) == NVIC_PriorityGroup_3) || \
+                                       ((GROUP) == NVIC_PriorityGroup_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_OFFSET(OFFSET)  ((OFFSET) < 0x000FFFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup SysTick_clock_source 
+  * @{
+  */
+
+#define SysTick_CLKSource_HCLK_Div8    ((uint32_t)0xFFFFFFFB)
+#define SysTick_CLKSource_HCLK         ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
+                                       ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Exported_Functions
+  * @{
+  */
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MISC_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_adc.h

@@ -0,0 +1,481 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_adc.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the ADC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_ADC_H
+#define __STM32F10x_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup ADC
+  * @{
+  */
+
+/** @defgroup ADC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  ADC Init structure definition  
+  */
+
+typedef struct
+{
+  uint32_t ADC_Mode;                      /*!< Configures the ADC to operate in independent or
+                                               dual mode. 
+                                               This parameter can be a value of @ref ADC_mode */
+
+  FunctionalState ADC_ScanConvMode;       /*!< Specifies whether the conversion is performed in
+                                               Scan (multichannels) or Single (one channel) mode.
+                                               This parameter can be set to ENABLE or DISABLE */
+
+  FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in
+                                               Continuous or Single mode.
+                                               This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t ADC_ExternalTrigConv;          /*!< Defines the external trigger used to start the analog
+                                               to digital conversion of regular channels. This parameter
+                                               can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */
+
+  uint32_t ADC_DataAlign;                 /*!< Specifies whether the ADC data alignment is left or right.
+                                               This parameter can be a value of @ref ADC_data_align */
+
+  uint8_t ADC_NbrOfChannel;               /*!< Specifies the number of ADC channels that will be converted
+                                               using the sequencer for regular channel group.
+                                               This parameter must range from 1 to 16. */
+}ADC_InitTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Constants
+  * @{
+  */
+
+#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+                                   ((PERIPH) == ADC2) || \
+                                   ((PERIPH) == ADC3))
+
+#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+                                   ((PERIPH) == ADC3))
+
+/** @defgroup ADC_mode 
+  * @{
+  */
+
+#define ADC_Mode_Independent                       ((uint32_t)0x00000000)
+#define ADC_Mode_RegInjecSimult                    ((uint32_t)0x00010000)
+#define ADC_Mode_RegSimult_AlterTrig               ((uint32_t)0x00020000)
+#define ADC_Mode_InjecSimult_FastInterl            ((uint32_t)0x00030000)
+#define ADC_Mode_InjecSimult_SlowInterl            ((uint32_t)0x00040000)
+#define ADC_Mode_InjecSimult                       ((uint32_t)0x00050000)
+#define ADC_Mode_RegSimult                         ((uint32_t)0x00060000)
+#define ADC_Mode_FastInterl                        ((uint32_t)0x00070000)
+#define ADC_Mode_SlowInterl                        ((uint32_t)0x00080000)
+#define ADC_Mode_AlterTrig                         ((uint32_t)0x00090000)
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
+                           ((MODE) == ADC_Mode_RegInjecSimult) || \
+                           ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \
+                           ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \
+                           ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \
+                           ((MODE) == ADC_Mode_InjecSimult) || \
+                           ((MODE) == ADC_Mode_RegSimult) || \
+                           ((MODE) == ADC_Mode_FastInterl) || \
+                           ((MODE) == ADC_Mode_SlowInterl) || \
+                           ((MODE) == ADC_Mode_AlterTrig))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion 
+  * @{
+  */
+
+#define ADC_ExternalTrigConv_T1_CC1                ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T1_CC2                ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T2_CC2                ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T3_TRGO               ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T4_CC4                ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO    ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigConv_T1_CC3                ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigConv_None                  ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigConv_T3_CC1                ((uint32_t)0x00000000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T2_CC3                ((uint32_t)0x00020000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_CC1                ((uint32_t)0x00060000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_TRGO               ((uint32_t)0x00080000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC1                ((uint32_t)0x000A0000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC3                ((uint32_t)0x000C0000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_None) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_data_align 
+  * @{
+  */
+
+#define ADC_DataAlign_Right                        ((uint32_t)0x00000000)
+#define ADC_DataAlign_Left                         ((uint32_t)0x00000800)
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
+                                  ((ALIGN) == ADC_DataAlign_Left))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_channels 
+  * @{
+  */
+
+#define ADC_Channel_0                               ((uint8_t)0x00)
+#define ADC_Channel_1                               ((uint8_t)0x01)
+#define ADC_Channel_2                               ((uint8_t)0x02)
+#define ADC_Channel_3                               ((uint8_t)0x03)
+#define ADC_Channel_4                               ((uint8_t)0x04)
+#define ADC_Channel_5                               ((uint8_t)0x05)
+#define ADC_Channel_6                               ((uint8_t)0x06)
+#define ADC_Channel_7                               ((uint8_t)0x07)
+#define ADC_Channel_8                               ((uint8_t)0x08)
+#define ADC_Channel_9                               ((uint8_t)0x09)
+#define ADC_Channel_10                              ((uint8_t)0x0A)
+#define ADC_Channel_11                              ((uint8_t)0x0B)
+#define ADC_Channel_12                              ((uint8_t)0x0C)
+#define ADC_Channel_13                              ((uint8_t)0x0D)
+#define ADC_Channel_14                              ((uint8_t)0x0E)
+#define ADC_Channel_15                              ((uint8_t)0x0F)
+#define ADC_Channel_16                              ((uint8_t)0x10)
+#define ADC_Channel_17                              ((uint8_t)0x11)
+
+#define ADC_Channel_TempSensor                      ((uint8_t)ADC_Channel_16)
+#define ADC_Channel_Vrefint                         ((uint8_t)ADC_Channel_17)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \
+                                 ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \
+                                 ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \
+                                 ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \
+                                 ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \
+                                 ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \
+                                 ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \
+                                 ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \
+                                 ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_sampling_time 
+  * @{
+  */
+
+#define ADC_SampleTime_1Cycles5                    ((uint8_t)0x00)
+#define ADC_SampleTime_7Cycles5                    ((uint8_t)0x01)
+#define ADC_SampleTime_13Cycles5                   ((uint8_t)0x02)
+#define ADC_SampleTime_28Cycles5                   ((uint8_t)0x03)
+#define ADC_SampleTime_41Cycles5                   ((uint8_t)0x04)
+#define ADC_SampleTime_55Cycles5                   ((uint8_t)0x05)
+#define ADC_SampleTime_71Cycles5                   ((uint8_t)0x06)
+#define ADC_SampleTime_239Cycles5                  ((uint8_t)0x07)
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_7Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_13Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_28Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_41Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_55Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_71Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_239Cycles5))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion 
+  * @{
+  */
+
+#define ADC_ExternalTrigInjecConv_T2_TRGO           ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T2_CC1            ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T3_CC4            ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T4_TRGO           ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigInjecConv_T1_TRGO           ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_T1_CC4            ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_None              ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigInjecConv_T4_CC3            ((uint32_t)0x00002000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC2            ((uint32_t)0x00003000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC4            ((uint32_t)0x00004000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_TRGO           ((uint32_t)0x00005000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_CC4            ((uint32_t)0x00006000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_channel_selection 
+  * @{
+  */
+
+#define ADC_InjectedChannel_1                       ((uint8_t)0x14)
+#define ADC_InjectedChannel_2                       ((uint8_t)0x18)
+#define ADC_InjectedChannel_3                       ((uint8_t)0x1C)
+#define ADC_InjectedChannel_4                       ((uint8_t)0x20)
+#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
+                                          ((CHANNEL) == ADC_InjectedChannel_2) || \
+                                          ((CHANNEL) == ADC_InjectedChannel_3) || \
+                                          ((CHANNEL) == ADC_InjectedChannel_4))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_analog_watchdog_selection 
+  * @{
+  */
+
+#define ADC_AnalogWatchdog_SingleRegEnable         ((uint32_t)0x00800200)
+#define ADC_AnalogWatchdog_SingleInjecEnable       ((uint32_t)0x00400200)
+#define ADC_AnalogWatchdog_SingleRegOrInjecEnable  ((uint32_t)0x00C00200)
+#define ADC_AnalogWatchdog_AllRegEnable            ((uint32_t)0x00800000)
+#define ADC_AnalogWatchdog_AllInjecEnable          ((uint32_t)0x00400000)
+#define ADC_AnalogWatchdog_AllRegAllInjecEnable    ((uint32_t)0x00C00000)
+#define ADC_AnalogWatchdog_None                    ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_None))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_interrupts_definition 
+  * @{
+  */
+
+#define ADC_IT_EOC                                 ((uint16_t)0x0220)
+#define ADC_IT_AWD                                 ((uint16_t)0x0140)
+#define ADC_IT_JEOC                                ((uint16_t)0x0480)
+
+#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00))
+
+#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+                           ((IT) == ADC_IT_JEOC))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_flags_definition 
+  * @{
+  */
+
+#define ADC_FLAG_AWD                               ((uint8_t)0x01)
+#define ADC_FLAG_EOC                               ((uint8_t)0x02)
+#define ADC_FLAG_JEOC                              ((uint8_t)0x04)
+#define ADC_FLAG_JSTRT                             ((uint8_t)0x08)
+#define ADC_FLAG_STRT                              ((uint8_t)0x10)
+#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00))
+#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \
+                               ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \
+                               ((FLAG) == ADC_FLAG_STRT))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_thresholds 
+  * @{
+  */
+
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_offset 
+  * @{
+  */
+
+#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_length 
+  * @{
+  */
+
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_rank 
+  * @{
+  */
+
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup ADC_regular_length 
+  * @{
+  */
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_rank 
+  * @{
+  */
+
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_discontinuous_mode_number 
+  * @{
+  */
+
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions
+  * @{
+  */
+
+void ADC_DeInit(ADC_TypeDef* ADCx);
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState);
+void ADC_ResetCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_StartCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number);
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx);
+uint32_t ADC_GetDualModeConversionValue(void);
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv);
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length);
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset);
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel);
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog);
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold);
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel);
+void ADC_TempSensorVrefintCmd(FunctionalState NewState);
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_ADC_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_bkp.h

@@ -0,0 +1,193 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_bkp.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the BKP firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_BKP_H
+#define __STM32F10x_BKP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup BKP
+  * @{
+  */
+
+/** @defgroup BKP_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Exported_Constants
+  * @{
+  */
+
+/** @defgroup Tamper_Pin_active_level 
+  * @{
+  */
+
+#define BKP_TamperPinLevel_High           ((uint16_t)0x0000)
+#define BKP_TamperPinLevel_Low            ((uint16_t)0x0001)
+#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
+                                        ((LEVEL) == BKP_TamperPinLevel_Low))
+/**
+  * @}
+  */
+
+/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin 
+  * @{
+  */
+
+#define BKP_RTCOutputSource_None          ((uint16_t)0x0000)
+#define BKP_RTCOutputSource_CalibClock    ((uint16_t)0x0080)
+#define BKP_RTCOutputSource_Alarm         ((uint16_t)0x0100)
+#define BKP_RTCOutputSource_Second        ((uint16_t)0x0300)
+#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
+                                          ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
+                                          ((SOURCE) == BKP_RTCOutputSource_Alarm) || \
+                                          ((SOURCE) == BKP_RTCOutputSource_Second))
+/**
+  * @}
+  */
+
+/** @defgroup Data_Backup_Register 
+  * @{
+  */
+
+#define BKP_DR1                           ((uint16_t)0x0004)
+#define BKP_DR2                           ((uint16_t)0x0008)
+#define BKP_DR3                           ((uint16_t)0x000C)
+#define BKP_DR4                           ((uint16_t)0x0010)
+#define BKP_DR5                           ((uint16_t)0x0014)
+#define BKP_DR6                           ((uint16_t)0x0018)
+#define BKP_DR7                           ((uint16_t)0x001C)
+#define BKP_DR8                           ((uint16_t)0x0020)
+#define BKP_DR9                           ((uint16_t)0x0024)
+#define BKP_DR10                          ((uint16_t)0x0028)
+#define BKP_DR11                          ((uint16_t)0x0040)
+#define BKP_DR12                          ((uint16_t)0x0044)
+#define BKP_DR13                          ((uint16_t)0x0048)
+#define BKP_DR14                          ((uint16_t)0x004C)
+#define BKP_DR15                          ((uint16_t)0x0050)
+#define BKP_DR16                          ((uint16_t)0x0054)
+#define BKP_DR17                          ((uint16_t)0x0058)
+#define BKP_DR18                          ((uint16_t)0x005C)
+#define BKP_DR19                          ((uint16_t)0x0060)
+#define BKP_DR20                          ((uint16_t)0x0064)
+#define BKP_DR21                          ((uint16_t)0x0068)
+#define BKP_DR22                          ((uint16_t)0x006C)
+#define BKP_DR23                          ((uint16_t)0x0070)
+#define BKP_DR24                          ((uint16_t)0x0074)
+#define BKP_DR25                          ((uint16_t)0x0078)
+#define BKP_DR26                          ((uint16_t)0x007C)
+#define BKP_DR27                          ((uint16_t)0x0080)
+#define BKP_DR28                          ((uint16_t)0x0084)
+#define BKP_DR29                          ((uint16_t)0x0088)
+#define BKP_DR30                          ((uint16_t)0x008C)
+#define BKP_DR31                          ((uint16_t)0x0090)
+#define BKP_DR32                          ((uint16_t)0x0094)
+#define BKP_DR33                          ((uint16_t)0x0098)
+#define BKP_DR34                          ((uint16_t)0x009C)
+#define BKP_DR35                          ((uint16_t)0x00A0)
+#define BKP_DR36                          ((uint16_t)0x00A4)
+#define BKP_DR37                          ((uint16_t)0x00A8)
+#define BKP_DR38                          ((uint16_t)0x00AC)
+#define BKP_DR39                          ((uint16_t)0x00B0)
+#define BKP_DR40                          ((uint16_t)0x00B4)
+#define BKP_DR41                          ((uint16_t)0x00B8)
+#define BKP_DR42                          ((uint16_t)0x00BC)
+
+#define IS_BKP_DR(DR) (((DR) == BKP_DR1)  || ((DR) == BKP_DR2)  || ((DR) == BKP_DR3)  || \
+                       ((DR) == BKP_DR4)  || ((DR) == BKP_DR5)  || ((DR) == BKP_DR6)  || \
+                       ((DR) == BKP_DR7)  || ((DR) == BKP_DR8)  || ((DR) == BKP_DR9)  || \
+                       ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
+                       ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
+                       ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
+                       ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
+                       ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
+                       ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
+                       ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
+                       ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
+                       ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
+                       ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
+                       ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
+
+#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Exported_Functions
+  * @{
+  */
+
+void BKP_DeInit(void);
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel);
+void BKP_TamperPinCmd(FunctionalState NewState);
+void BKP_ITConfig(FunctionalState NewState);
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource);
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue);
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data);
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR);
+FlagStatus BKP_GetFlagStatus(void);
+void BKP_ClearFlag(void);
+ITStatus BKP_GetITStatus(void);
+void BKP_ClearITPendingBit(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_BKP_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_can.h

@@ -0,0 +1,695 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_can.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the CAN firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CAN_H
+#define __STM32F10x_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CAN
+  * @{
+  */
+
+/** @defgroup CAN_Exported_Types
+  * @{
+  */
+
+#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \
+                                   ((PERIPH) == CAN2))
+
+/** 
+  * @brief  CAN init structure definition
+  */
+
+typedef struct
+{
+  uint16_t CAN_Prescaler;   /*!< Specifies the length of a time quantum. 
+                                 It ranges from 1 to 1024. */
+  
+  uint8_t CAN_Mode;         /*!< Specifies the CAN operating mode.
+                                 This parameter can be a value of 
+                                @ref CAN_operating_mode */
+
+  uint8_t CAN_SJW;          /*!< Specifies the maximum number of time quanta 
+                                 the CAN hardware is allowed to lengthen or 
+                                 shorten a bit to perform resynchronization.
+                                 This parameter can be a value of 
+                                 @ref CAN_synchronisation_jump_width */
+
+  uint8_t CAN_BS1;          /*!< Specifies the number of time quanta in Bit 
+                                 Segment 1. This parameter can be a value of 
+                                 @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint8_t CAN_BS2;          /*!< Specifies the number of time quanta in Bit 
+                                 Segment 2.
+                                 This parameter can be a value of 
+                                 @ref CAN_time_quantum_in_bit_segment_2 */
+  
+  FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered 
+                                 communication mode. This parameter can be set 
+                                 either to ENABLE or DISABLE. */
+  
+  FunctionalState CAN_ABOM;  /*!< Enable or disable the automatic bus-off 
+                                  management. This parameter can be set either 
+                                  to ENABLE or DISABLE. */
+
+  FunctionalState CAN_AWUM;  /*!< Enable or disable the automatic wake-up mode. 
+                                  This parameter can be set either to ENABLE or 
+                                  DISABLE. */
+
+  FunctionalState CAN_NART;  /*!< Enable or disable the no-automatic 
+                                  retransmission mode. This parameter can be 
+                                  set either to ENABLE or DISABLE. */
+
+  FunctionalState CAN_RFLM;  /*!< Enable or disable the Receive FIFO Locked mode.
+                                  This parameter can be set either to ENABLE 
+                                  or DISABLE. */
+
+  FunctionalState CAN_TXFP;  /*!< Enable or disable the transmit FIFO priority.
+                                  This parameter can be set either to ENABLE 
+                                  or DISABLE. */
+} CAN_InitTypeDef;
+
+/** 
+  * @brief  CAN filter init structure definition
+  */
+
+typedef struct
+{
+  uint16_t CAN_FilterIdHigh;         /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                              configuration, first one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterIdLow;          /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                              configuration, second one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterMaskIdHigh;     /*!< Specifies the filter mask number or identification number,
+                                              according to the mode (MSBs for a 32-bit configuration,
+                                              first one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterMaskIdLow;      /*!< Specifies the filter mask number or identification number,
+                                              according to the mode (LSBs for a 32-bit configuration,
+                                              second one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+                                              This parameter can be a value of @ref CAN_filter_FIFO */
+  
+  uint8_t CAN_FilterNumber;          /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
+
+  uint8_t CAN_FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                              This parameter can be a value of @ref CAN_filter_mode */
+
+  uint8_t CAN_FilterScale;           /*!< Specifies the filter scale.
+                                              This parameter can be a value of @ref CAN_filter_scale */
+
+  FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
+                                              This parameter can be set either to ENABLE or DISABLE. */
+} CAN_FilterInitTypeDef;
+
+/** 
+  * @brief  CAN Tx message structure definition  
+  */
+
+typedef struct
+{
+  uint32_t StdId;  /*!< Specifies the standard identifier.
+                        This parameter can be a value between 0 to 0x7FF. */
+
+  uint32_t ExtId;  /*!< Specifies the extended identifier.
+                        This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+  uint8_t IDE;     /*!< Specifies the type of identifier for the message that 
+                        will be transmitted. This parameter can be a value 
+                        of @ref CAN_identifier_type */
+
+  uint8_t RTR;     /*!< Specifies the type of frame for the message that will 
+                        be transmitted. This parameter can be a value of 
+                        @ref CAN_remote_transmission_request */
+
+  uint8_t DLC;     /*!< Specifies the length of the frame that will be 
+                        transmitted. This parameter can be a value between 
+                        0 to 8 */
+
+  uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 
+                        to 0xFF. */
+} CanTxMsg;
+
+/** 
+  * @brief  CAN Rx message structure definition  
+  */
+
+typedef struct
+{
+  uint32_t StdId;  /*!< Specifies the standard identifier.
+                        This parameter can be a value between 0 to 0x7FF. */
+
+  uint32_t ExtId;  /*!< Specifies the extended identifier.
+                        This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+  uint8_t IDE;     /*!< Specifies the type of identifier for the message that 
+                        will be received. This parameter can be a value of 
+                        @ref CAN_identifier_type */
+
+  uint8_t RTR;     /*!< Specifies the type of frame for the received message.
+                        This parameter can be a value of 
+                        @ref CAN_remote_transmission_request */
+
+  uint8_t DLC;     /*!< Specifies the length of the frame that will be received.
+                        This parameter can be a value between 0 to 8 */
+
+  uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to 
+                        0xFF. */
+
+  uint8_t FMI;     /*!< Specifies the index of the filter the message stored in 
+                        the mailbox passes through. This parameter can be a 
+                        value between 0 to 0xFF */
+} CanRxMsg;
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Constants
+  * @{
+  */
+
+/** @defgroup CAN_sleep_constants 
+  * @{
+  */
+
+#define CAN_InitStatus_Failed              ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_InitStatus_Success             ((uint8_t)0x01) /*!< CAN initialization OK */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Mode 
+  * @{
+  */
+
+#define CAN_Mode_Normal             ((uint8_t)0x00)  /*!< normal mode */
+#define CAN_Mode_LoopBack           ((uint8_t)0x01)  /*!< loopback mode */
+#define CAN_Mode_Silent             ((uint8_t)0x02)  /*!< silent mode */
+#define CAN_Mode_Silent_LoopBack    ((uint8_t)0x03)  /*!< loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
+                           ((MODE) == CAN_Mode_LoopBack)|| \
+                           ((MODE) == CAN_Mode_Silent) || \
+                           ((MODE) == CAN_Mode_Silent_LoopBack))
+/**
+  * @}
+  */
+
+
+/**
+  * @defgroup CAN_Operating_Mode 
+  * @{
+  */  
+#define CAN_OperatingMode_Initialization  ((uint8_t)0x00) /*!< Initialization mode */
+#define CAN_OperatingMode_Normal          ((uint8_t)0x01) /*!< Normal mode */
+#define CAN_OperatingMode_Sleep           ((uint8_t)0x02) /*!< sleep mode */
+
+
+#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
+                                    ((MODE) == CAN_OperatingMode_Normal)|| \
+																		((MODE) == CAN_OperatingMode_Sleep))
+/**
+  * @}
+  */
+  
+/**
+  * @defgroup CAN_Mode_Status
+  * @{
+  */  
+
+#define CAN_ModeStatus_Failed    ((uint8_t)0x00)                /*!< CAN entering the specific mode failed */
+#define CAN_ModeStatus_Success   ((uint8_t)!CAN_ModeStatus_Failed)   /*!< CAN entering the specific mode Succeed */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_synchronisation_jump_width 
+  * @{
+  */
+
+#define CAN_SJW_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_SJW_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_SJW_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_SJW_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
+                         ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 
+  * @{
+  */
+
+#define CAN_BS1_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_BS1_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_BS1_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_BS1_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+#define CAN_BS1_5tq                 ((uint8_t)0x04)  /*!< 5 time quantum */
+#define CAN_BS1_6tq                 ((uint8_t)0x05)  /*!< 6 time quantum */
+#define CAN_BS1_7tq                 ((uint8_t)0x06)  /*!< 7 time quantum */
+#define CAN_BS1_8tq                 ((uint8_t)0x07)  /*!< 8 time quantum */
+#define CAN_BS1_9tq                 ((uint8_t)0x08)  /*!< 9 time quantum */
+#define CAN_BS1_10tq                ((uint8_t)0x09)  /*!< 10 time quantum */
+#define CAN_BS1_11tq                ((uint8_t)0x0A)  /*!< 11 time quantum */
+#define CAN_BS1_12tq                ((uint8_t)0x0B)  /*!< 12 time quantum */
+#define CAN_BS1_13tq                ((uint8_t)0x0C)  /*!< 13 time quantum */
+#define CAN_BS1_14tq                ((uint8_t)0x0D)  /*!< 14 time quantum */
+#define CAN_BS1_15tq                ((uint8_t)0x0E)  /*!< 15 time quantum */
+#define CAN_BS1_16tq                ((uint8_t)0x0F)  /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 
+  * @{
+  */
+
+#define CAN_BS2_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_BS2_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_BS2_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_BS2_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+#define CAN_BS2_5tq                 ((uint8_t)0x04)  /*!< 5 time quantum */
+#define CAN_BS2_6tq                 ((uint8_t)0x05)  /*!< 6 time quantum */
+#define CAN_BS2_7tq                 ((uint8_t)0x06)  /*!< 7 time quantum */
+#define CAN_BS2_8tq                 ((uint8_t)0x07)  /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_clock_prescaler 
+  * @{
+  */
+
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_number 
+  * @{
+  */
+#ifndef STM32F10X_CL
+  #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
+#else
+  #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#endif /* STM32F10X_CL */ 
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode 
+  * @{
+  */
+
+#define CAN_FilterMode_IdMask       ((uint8_t)0x00)  /*!< identifier/mask mode */
+#define CAN_FilterMode_IdList       ((uint8_t)0x01)  /*!< identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
+                                  ((MODE) == CAN_FilterMode_IdList))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale 
+  * @{
+  */
+
+#define CAN_FilterScale_16bit       ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FilterScale_32bit       ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
+                                    ((SCALE) == CAN_FilterScale_32bit))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO
+  * @{
+  */
+
+#define CAN_Filter_FIFO0             ((uint8_t)0x00)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_Filter_FIFO1             ((uint8_t)0x01)  /*!< Filter FIFO 1 assignment for filter x */
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
+                                  ((FIFO) == CAN_FilterFIFO1))
+/**
+  * @}
+  */
+
+/** @defgroup Start_bank_filter_for_slave_CAN 
+  * @{
+  */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Tx 
+  * @{
+  */
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID)   ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC)       ((DLC) <= ((uint8_t)0x08))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_identifier_type 
+  * @{
+  */
+
+#define CAN_Id_Standard             ((uint32_t)0x00000000)  /*!< Standard Id */
+#define CAN_Id_Extended             ((uint32_t)0x00000004)  /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
+                               ((IDTYPE) == CAN_Id_Extended))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request 
+  * @{
+  */
+
+#define CAN_RTR_Data                ((uint32_t)0x00000000)  /*!< Data frame */
+#define CAN_RTR_Remote              ((uint32_t)0x00000002)  /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_transmit_constants 
+  * @{
+  */
+
+#define CAN_TxStatus_Failed         ((uint8_t)0x00)/*!< CAN transmission failed */
+#define CAN_TxStatus_Ok             ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TxStatus_Pending        ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TxStatus_NoMailBox      ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number_constants 
+  * @{
+  */
+
+#define CAN_FIFO0                 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1                 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_sleep_constants 
+  * @{
+  */
+
+#define CAN_Sleep_Failed     ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
+#define CAN_Sleep_Ok         ((uint8_t)0x01) /*!< CAN entered the sleep mode */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_wake_up_constants 
+  * @{
+  */
+
+#define CAN_WakeUp_Failed        ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
+#define CAN_WakeUp_Ok            ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
+
+/**
+  * @}
+  */
+
+/**
+  * @defgroup   CAN_Error_Code_constants
+  * @{
+  */  
+                                                                
+#define CAN_ErrorCode_NoErr           ((uint8_t)0x00) /*!< No Error */ 
+#define	CAN_ErrorCode_StuffErr        ((uint8_t)0x10) /*!< Stuff Error */ 
+#define	CAN_ErrorCode_FormErr         ((uint8_t)0x20) /*!< Form Error */ 
+#define	CAN_ErrorCode_ACKErr          ((uint8_t)0x30) /*!< Acknowledgment Error */ 
+#define	CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ 
+#define	CAN_ErrorCode_BitDominantErr  ((uint8_t)0x50) /*!< Bit Dominant Error */ 
+#define	CAN_ErrorCode_CRCErr          ((uint8_t)0x60) /*!< CRC Error  */ 
+#define	CAN_ErrorCode_SoftwareSetErr  ((uint8_t)0x70) /*!< Software Set Error */ 
+
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags 
+  * @{
+  */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+   and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function.  */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0             ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
+#define CAN_FLAG_RQCP1             ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
+#define CAN_FLAG_RQCP2             ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FMP0              ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
+#define CAN_FLAG_FF0               ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag            */
+#define CAN_FLAG_FOV0              ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag         */
+#define CAN_FLAG_FMP1              ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
+#define CAN_FLAG_FF1               ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag            */
+#define CAN_FLAG_FOV1              ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag         */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU               ((uint32_t)0x31000008) /*!< Wake up Flag */
+#define CAN_FLAG_SLAK              ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
+/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. 
+         In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG               ((uint32_t)0x10F00001) /*!< Error Warning Flag   */
+#define CAN_FLAG_EPV               ((uint32_t)0x10F00002) /*!< Error Passive Flag   */
+#define CAN_FLAG_BOF               ((uint32_t)0x10F00004) /*!< Bus-Off Flag         */
+#define CAN_FLAG_LEC               ((uint32_t)0x30F00070) /*!< Last error code Flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC)  || ((FLAG) == CAN_FLAG_BOF)   || \
+                               ((FLAG) == CAN_FLAG_EPV)  || ((FLAG) == CAN_FLAG_EWG)   || \
+                               ((FLAG) == CAN_FLAG_WKU)  || ((FLAG) == CAN_FLAG_FOV0)  || \
+                               ((FLAG) == CAN_FLAG_FF0)  || ((FLAG) == CAN_FLAG_FMP0)  || \
+                               ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1)   || \
+                               ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
+                               ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
+                               ((FLAG) == CAN_FLAG_SLAK ))
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
+                                ((FLAG) == CAN_FLAG_RQCP1)  || ((FLAG) == CAN_FLAG_RQCP0) || \
+                                ((FLAG) == CAN_FLAG_FF0)  || ((FLAG) == CAN_FLAG_FOV0) ||\
+                                ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+                                ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
+/**
+  * @}
+  */
+
+  
+/** @defgroup CAN_interrupts 
+  * @{
+  */
+
+
+  
+#define CAN_IT_TME                  ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0                 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
+#define CAN_IT_FF0                  ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
+#define CAN_IT_FOV0                 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
+#define CAN_IT_FMP1                 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
+#define CAN_IT_FF1                  ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
+#define CAN_IT_FOV1                 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU                  ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
+#define CAN_IT_SLK                  ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
+
+/* Error Interrupts */
+#define CAN_IT_EWG                  ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
+#define CAN_IT_EPV                  ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
+#define CAN_IT_BOF                  ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
+#define CAN_IT_LEC                  ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
+#define CAN_IT_ERR                  ((uint32_t)0x00008000) /*!< Error Interrupt*/
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0   CAN_IT_TME
+#define CAN_IT_RQCP1   CAN_IT_TME
+#define CAN_IT_RQCP2   CAN_IT_TME
+
+
+#define IS_CAN_IT(IT)        (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0)  ||\
+                             ((IT) == CAN_IT_FF0)  || ((IT) == CAN_IT_FOV0)  ||\
+                             ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1)   ||\
+                             ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG)   ||\
+                             ((IT) == CAN_IT_EPV)  || ((IT) == CAN_IT_BOF)   ||\
+                             ((IT) == CAN_IT_LEC)  || ((IT) == CAN_IT_ERR)   ||\
+                             ((IT) == CAN_IT_WKU)  || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0)    ||\
+                             ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1)    ||\
+                             ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG)    ||\
+                             ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF)    ||\
+                             ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR)    ||\
+                             ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Legacy 
+  * @{
+  */
+#define CANINITFAILED               CAN_InitStatus_Failed
+#define CANINITOK                   CAN_InitStatus_Success
+#define CAN_FilterFIFO0             CAN_Filter_FIFO0
+#define CAN_FilterFIFO1             CAN_Filter_FIFO1
+#define CAN_ID_STD                  CAN_Id_Standard           
+#define CAN_ID_EXT                  CAN_Id_Extended
+#define CAN_RTR_DATA                CAN_RTR_Data         
+#define CAN_RTR_REMOTE              CAN_RTR_Remote
+#define CANTXFAILE                  CAN_TxStatus_Failed
+#define CANTXOK                     CAN_TxStatus_Ok
+#define CANTXPENDING                CAN_TxStatus_Pending
+#define CAN_NO_MB                   CAN_TxStatus_NoMailBox
+#define CANSLEEPFAILED              CAN_Sleep_Failed
+#define CANSLEEPOK                  CAN_Sleep_Ok
+#define CANWAKEUPFAILED             CAN_WakeUp_Failed        
+#define CANWAKEUPOK                 CAN_WakeUp_Ok        
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Functions
+  * @{
+  */
+/*  Function used to set the CAN configuration to the default reset state *****/ 
+void CAN_DeInit(CAN_TypeDef* CANx);
+
+/* Initialization and Configuration functions *********************************/ 
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber); 
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
+
+/* Transmit functions *********************************************************/
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
+
+/* Receive functions **********************************************************/
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
+
+
+/* Operation modes functions **************************************************/
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
+uint8_t CAN_Sleep(CAN_TypeDef* CANx);
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
+
+/* Error management functions *************************************************/
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
+
+/* Interrupts and flags management functions **********************************/
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CAN_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_cec.h

@@ -0,0 +1,208 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_cec.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the CEC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CEC_H
+#define __STM32F10x_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CEC
+  * @{
+  */
+  
+
+/** @defgroup CEC_Exported_Types
+  * @{
+  */
+   
+/** 
+  * @brief  CEC Init structure definition  
+  */ 
+typedef struct
+{
+  uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode. 
+                               This parameter can be a value of @ref CEC_BitTiming_Mode */
+  uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode. 
+                               This parameter can be a value of @ref CEC_BitPeriod_Mode */
+}CEC_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Constants
+  * @{
+  */ 
+  
+/** @defgroup CEC_BitTiming_Mode 
+  * @{
+  */ 
+#define CEC_BitTimingStdMode                    ((uint16_t)0x00) /*!< Bit timing error Standard Mode */
+#define CEC_BitTimingErrFreeMode                CEC_CFGR_BTEM   /*!< Bit timing error Free Mode */
+
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \
+                                            ((MODE) == CEC_BitTimingErrFreeMode))
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BitPeriod_Mode 
+  * @{
+  */ 
+#define CEC_BitPeriodStdMode                    ((uint16_t)0x00) /*!< Bit period error Standard Mode */
+#define CEC_BitPeriodFlexibleMode                CEC_CFGR_BPEM   /*!< Bit period error Flexible Mode */
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \
+                                            ((MODE) == CEC_BitPeriodFlexibleMode))
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_interrupts_definition 
+  * @{
+  */ 
+#define CEC_IT_TERR                              CEC_CSR_TERR
+#define CEC_IT_TBTRF                             CEC_CSR_TBTRF
+#define CEC_IT_RERR                              CEC_CSR_RERR
+#define CEC_IT_RBTF                              CEC_CSR_RBTF
+#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \
+                           ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF))
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_Own_Address 
+  * @{
+  */ 
+#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
+/**
+  * @}
+  */ 
+
+/** @defgroup CEC_Prescaler 
+  * @{
+  */ 
+#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup CEC_flags_definition 
+  * @{
+  */
+   
+/** 
+  * @brief  ESR register flags  
+  */ 
+#define CEC_FLAG_BTE                            ((uint32_t)0x10010000)
+#define CEC_FLAG_BPE                            ((uint32_t)0x10020000)
+#define CEC_FLAG_RBTFE                          ((uint32_t)0x10040000)
+#define CEC_FLAG_SBE                            ((uint32_t)0x10080000)
+#define CEC_FLAG_ACKE                           ((uint32_t)0x10100000)
+#define CEC_FLAG_LINE                           ((uint32_t)0x10200000)
+#define CEC_FLAG_TBTFE                          ((uint32_t)0x10400000)
+
+/** 
+  * @brief  CSR register flags  
+  */ 
+#define CEC_FLAG_TEOM                           ((uint32_t)0x00000002)  
+#define CEC_FLAG_TERR                           ((uint32_t)0x00000004)
+#define CEC_FLAG_TBTRF                          ((uint32_t)0x00000008)
+#define CEC_FLAG_RSOM                           ((uint32_t)0x00000010)
+#define CEC_FLAG_REOM                           ((uint32_t)0x00000020)
+#define CEC_FLAG_RERR                           ((uint32_t)0x00000040)
+#define CEC_FLAG_RBTF                           ((uint32_t)0x00000080)
+
+#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00))
+                               
+#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \
+                               ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \
+                               ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \
+                               ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \
+                               ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \
+                               ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \
+                               ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF))
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup CEC_Exported_Macros
+  * @{
+  */
+ 
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions
+  * @{
+  */ 
+void CEC_DeInit(void);
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
+void CEC_Cmd(FunctionalState NewState);
+void CEC_ITConfig(FunctionalState NewState);
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
+void CEC_SetPrescaler(uint16_t CEC_Prescaler);
+void CEC_SendDataByte(uint8_t Data);
+uint8_t CEC_ReceiveDataByte(void);
+void CEC_StartOfMessage(void);
+void CEC_EndOfMessageCmd(FunctionalState NewState);
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG);
+void CEC_ClearFlag(uint32_t CEC_FLAG);
+ITStatus CEC_GetITStatus(uint8_t CEC_IT);
+void CEC_ClearITPendingBit(uint16_t CEC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CEC_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+

project_Template/Libraries/FWlib/inc/stm32f10x_crc.h

@@ -0,0 +1,92 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_crc.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the CRC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CRC_H
+#define __STM32F10x_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CRC
+  * @{
+  */
+
+/** @defgroup CRC_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Functions
+  * @{
+  */
+
+void CRC_ResetDR(void);
+uint32_t CRC_CalcCRC(uint32_t Data);
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t CRC_GetCRC(void);
+void CRC_SetIDRegister(uint8_t IDValue);
+uint8_t CRC_GetIDRegister(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CRC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_dac.h

@@ -0,0 +1,315 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dac.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the DAC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DAC_H
+#define __STM32F10x_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup DAC
+  * @{
+  */
+
+/** @defgroup DAC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  DAC Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t DAC_Trigger;                      /*!< Specifies the external trigger for the selected DAC channel.
+                                                  This parameter can be a value of @ref DAC_trigger_selection */
+
+  uint32_t DAC_WaveGeneration;               /*!< Specifies whether DAC channel noise waves or triangle waves
+                                                  are generated, or whether no wave is generated.
+                                                  This parameter can be a value of @ref DAC_wave_generation */
+
+  uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
+                                                  the maximum amplitude triangle generation for the DAC channel. 
+                                                  This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
+
+  uint32_t DAC_OutputBuffer;                 /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+                                                  This parameter can be a value of @ref DAC_output_buffer */
+}DAC_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup DAC_trigger_selection 
+  * @{
+  */
+
+#define DAC_Trigger_None                   ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register 
+                                                                       has been loaded, and not by external trigger */
+#define DAC_Trigger_T6_TRGO                ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T8_TRGO                ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+                                                                       only in High-density devices*/
+#define DAC_Trigger_T3_TRGO                ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+                                                                       only in Connectivity line, Medium-density and Low-density Value Line devices */
+#define DAC_Trigger_T7_TRGO                ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T5_TRGO                ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T15_TRGO               ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel 
+                                                                       only in Medium-density and Low-density Value Line devices*/
+#define DAC_Trigger_T2_TRGO                ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T4_TRGO                ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Ext_IT9                ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Software               ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
+                                 ((TRIGGER) == DAC_Trigger_T6_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T8_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T7_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T5_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T2_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T4_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_Ext_IT9) || \
+                                 ((TRIGGER) == DAC_Trigger_Software))
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_wave_generation 
+  * @{
+  */
+
+#define DAC_WaveGeneration_None            ((uint32_t)0x00000000)
+#define DAC_WaveGeneration_Noise           ((uint32_t)0x00000040)
+#define DAC_WaveGeneration_Triangle        ((uint32_t)0x00000080)
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
+                                    ((WAVE) == DAC_WaveGeneration_Noise) || \
+                                    ((WAVE) == DAC_WaveGeneration_Triangle))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude
+  * @{
+  */
+
+#define DAC_LFSRUnmask_Bit0                ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUnmask_Bits1_0             ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits2_0             ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits3_0             ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits4_0             ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits5_0             ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits6_0             ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits7_0             ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits8_0             ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits9_0             ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits10_0            ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits11_0            ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TriangleAmplitude_1            ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TriangleAmplitude_3            ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
+#define DAC_TriangleAmplitude_7            ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
+#define DAC_TriangleAmplitude_15           ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
+#define DAC_TriangleAmplitude_31           ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
+#define DAC_TriangleAmplitude_63           ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
+#define DAC_TriangleAmplitude_127          ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
+#define DAC_TriangleAmplitude_255          ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
+#define DAC_TriangleAmplitude_511          ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
+#define DAC_TriangleAmplitude_1023         ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TriangleAmplitude_2047         ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TriangleAmplitude_4095         ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_1) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_3) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_7) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_15) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_31) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_63) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_127) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_255) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_511) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_1023) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_2047) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_4095))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_output_buffer 
+  * @{
+  */
+
+#define DAC_OutputBuffer_Enable            ((uint32_t)0x00000000)
+#define DAC_OutputBuffer_Disable           ((uint32_t)0x00000002)
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
+                                           ((STATE) == DAC_OutputBuffer_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Channel_selection 
+  * @{
+  */
+
+#define DAC_Channel_1                      ((uint32_t)0x00000000)
+#define DAC_Channel_2                      ((uint32_t)0x00000010)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
+                                 ((CHANNEL) == DAC_Channel_2))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data_alignment 
+  * @{
+  */
+
+#define DAC_Align_12b_R                    ((uint32_t)0x00000000)
+#define DAC_Align_12b_L                    ((uint32_t)0x00000004)
+#define DAC_Align_8b_R                     ((uint32_t)0x00000008)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
+                             ((ALIGN) == DAC_Align_12b_L) || \
+                             ((ALIGN) == DAC_Align_8b_R))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_wave_generation 
+  * @{
+  */
+
+#define DAC_Wave_Noise                     ((uint32_t)0x00000040)
+#define DAC_Wave_Triangle                  ((uint32_t)0x00000080)
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
+                           ((WAVE) == DAC_Wave_Triangle))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data 
+  * @{
+  */
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) 
+/**
+  * @}
+  */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL)  || defined (STM32F10X_HD_VL)
+/** @defgroup DAC_interrupts_definition 
+  * @{
+  */ 
+  
+#define DAC_IT_DMAUDR                      ((uint32_t)0x00002000)  
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup DAC_flags_definition 
+  * @{
+  */ 
+  
+#define DAC_FLAG_DMAUDR                    ((uint32_t)0x00002000)  
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))  
+
+/**
+  * @}
+  */
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions
+  * @{
+  */
+
+void DAC_DeInit(void);
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
+#endif
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) 
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DAC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_dbgmcu.h

@@ -0,0 +1,117 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dbgmcu.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the DBGMCU 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DBGMCU_H
+#define __STM32F10x_DBGMCU_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup DBGMCU
+  * @{
+  */
+
+/** @defgroup DBGMCU_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Exported_Constants
+  * @{
+  */
+
+#define DBGMCU_SLEEP                 ((uint32_t)0x00000001)
+#define DBGMCU_STOP                  ((uint32_t)0x00000002)
+#define DBGMCU_STANDBY               ((uint32_t)0x00000004)
+#define DBGMCU_IWDG_STOP             ((uint32_t)0x00000100)
+#define DBGMCU_WWDG_STOP             ((uint32_t)0x00000200)
+#define DBGMCU_TIM1_STOP             ((uint32_t)0x00000400)
+#define DBGMCU_TIM2_STOP             ((uint32_t)0x00000800)
+#define DBGMCU_TIM3_STOP             ((uint32_t)0x00001000)
+#define DBGMCU_TIM4_STOP             ((uint32_t)0x00002000)
+#define DBGMCU_CAN1_STOP             ((uint32_t)0x00004000)
+#define DBGMCU_I2C1_SMBUS_TIMEOUT    ((uint32_t)0x00008000)
+#define DBGMCU_I2C2_SMBUS_TIMEOUT    ((uint32_t)0x00010000)
+#define DBGMCU_TIM8_STOP             ((uint32_t)0x00020000)
+#define DBGMCU_TIM5_STOP             ((uint32_t)0x00040000)
+#define DBGMCU_TIM6_STOP             ((uint32_t)0x00080000)
+#define DBGMCU_TIM7_STOP             ((uint32_t)0x00100000)
+#define DBGMCU_CAN2_STOP             ((uint32_t)0x00200000)
+#define DBGMCU_TIM15_STOP            ((uint32_t)0x00400000)
+#define DBGMCU_TIM16_STOP            ((uint32_t)0x00800000)
+#define DBGMCU_TIM17_STOP            ((uint32_t)0x01000000)
+#define DBGMCU_TIM12_STOP            ((uint32_t)0x02000000)
+#define DBGMCU_TIM13_STOP            ((uint32_t)0x04000000)
+#define DBGMCU_TIM14_STOP            ((uint32_t)0x08000000)
+#define DBGMCU_TIM9_STOP             ((uint32_t)0x10000000)
+#define DBGMCU_TIM10_STOP            ((uint32_t)0x20000000)
+#define DBGMCU_TIM11_STOP            ((uint32_t)0x40000000)
+                                              
+#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup DBGMCU_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Exported_Functions
+  * @{
+  */
+
+uint32_t DBGMCU_GetREVID(void);
+uint32_t DBGMCU_GetDEVID(void);
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_DBGMCU_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_dma.h

@@ -0,0 +1,437 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dma.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the DMA firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DMA_H
+#define __STM32F10x_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */
+
+/** @defgroup DMA_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  DMA Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */
+
+  uint32_t DMA_MemoryBaseAddr;     /*!< Specifies the memory base address for DMAy Channelx. */
+
+  uint32_t DMA_DIR;                /*!< Specifies if the peripheral is the source or destination.
+                                        This parameter can be a value of @ref DMA_data_transfer_direction */
+
+  uint32_t DMA_BufferSize;         /*!< Specifies the buffer size, in data unit, of the specified Channel. 
+                                        The data unit is equal to the configuration set in DMA_PeripheralDataSize
+                                        or DMA_MemoryDataSize members depending in the transfer direction. */
+
+  uint32_t DMA_PeripheralInc;      /*!< Specifies whether the Peripheral address register is incremented or not.
+                                        This parameter can be a value of @ref DMA_peripheral_incremented_mode */
+
+  uint32_t DMA_MemoryInc;          /*!< Specifies whether the memory address register is incremented or not.
+                                        This parameter can be a value of @ref DMA_memory_incremented_mode */
+
+  uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
+                                        This parameter can be a value of @ref DMA_peripheral_data_size */
+
+  uint32_t DMA_MemoryDataSize;     /*!< Specifies the Memory data width.
+                                        This parameter can be a value of @ref DMA_memory_data_size */
+
+  uint32_t DMA_Mode;               /*!< Specifies the operation mode of the DMAy Channelx.
+                                        This parameter can be a value of @ref DMA_circular_normal_mode.
+                                        @note: The circular buffer mode cannot be used if the memory-to-memory
+                                              data transfer is configured on the selected Channel */
+
+  uint32_t DMA_Priority;           /*!< Specifies the software priority for the DMAy Channelx.
+                                        This parameter can be a value of @ref DMA_priority_level */
+
+  uint32_t DMA_M2M;                /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer.
+                                        This parameter can be a value of @ref DMA_memory_to_memory */
+}DMA_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Constants
+  * @{
+  */
+
+#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \
+                                   ((PERIPH) == DMA1_Channel2) || \
+                                   ((PERIPH) == DMA1_Channel3) || \
+                                   ((PERIPH) == DMA1_Channel4) || \
+                                   ((PERIPH) == DMA1_Channel5) || \
+                                   ((PERIPH) == DMA1_Channel6) || \
+                                   ((PERIPH) == DMA1_Channel7) || \
+                                   ((PERIPH) == DMA2_Channel1) || \
+                                   ((PERIPH) == DMA2_Channel2) || \
+                                   ((PERIPH) == DMA2_Channel3) || \
+                                   ((PERIPH) == DMA2_Channel4) || \
+                                   ((PERIPH) == DMA2_Channel5))
+
+/** @defgroup DMA_data_transfer_direction 
+  * @{
+  */
+
+#define DMA_DIR_PeripheralDST              ((uint32_t)0x00000010)
+#define DMA_DIR_PeripheralSRC              ((uint32_t)0x00000000)
+#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \
+                         ((DIR) == DMA_DIR_PeripheralSRC))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_peripheral_incremented_mode 
+  * @{
+  */
+
+#define DMA_PeripheralInc_Enable           ((uint32_t)0x00000040)
+#define DMA_PeripheralInc_Disable          ((uint32_t)0x00000000)
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
+                                            ((STATE) == DMA_PeripheralInc_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_memory_incremented_mode 
+  * @{
+  */
+
+#define DMA_MemoryInc_Enable               ((uint32_t)0x00000080)
+#define DMA_MemoryInc_Disable              ((uint32_t)0x00000000)
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
+                                        ((STATE) == DMA_MemoryInc_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_peripheral_data_size 
+  * @{
+  */
+
+#define DMA_PeripheralDataSize_Byte        ((uint32_t)0x00000000)
+#define DMA_PeripheralDataSize_HalfWord    ((uint32_t)0x00000100)
+#define DMA_PeripheralDataSize_Word        ((uint32_t)0x00000200)
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
+                                           ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
+                                           ((SIZE) == DMA_PeripheralDataSize_Word))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_memory_data_size 
+  * @{
+  */
+
+#define DMA_MemoryDataSize_Byte            ((uint32_t)0x00000000)
+#define DMA_MemoryDataSize_HalfWord        ((uint32_t)0x00000400)
+#define DMA_MemoryDataSize_Word            ((uint32_t)0x00000800)
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
+                                       ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
+                                       ((SIZE) == DMA_MemoryDataSize_Word))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_circular_normal_mode 
+  * @{
+  */
+
+#define DMA_Mode_Circular                  ((uint32_t)0x00000020)
+#define DMA_Mode_Normal                    ((uint32_t)0x00000000)
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_priority_level 
+  * @{
+  */
+
+#define DMA_Priority_VeryHigh              ((uint32_t)0x00003000)
+#define DMA_Priority_High                  ((uint32_t)0x00002000)
+#define DMA_Priority_Medium                ((uint32_t)0x00001000)
+#define DMA_Priority_Low                   ((uint32_t)0x00000000)
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
+                                   ((PRIORITY) == DMA_Priority_High) || \
+                                   ((PRIORITY) == DMA_Priority_Medium) || \
+                                   ((PRIORITY) == DMA_Priority_Low))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_memory_to_memory 
+  * @{
+  */
+
+#define DMA_M2M_Enable                     ((uint32_t)0x00004000)
+#define DMA_M2M_Disable                    ((uint32_t)0x00000000)
+#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable))
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_interrupts_definition 
+  * @{
+  */
+
+#define DMA_IT_TC                          ((uint32_t)0x00000002)
+#define DMA_IT_HT                          ((uint32_t)0x00000004)
+#define DMA_IT_TE                          ((uint32_t)0x00000008)
+#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))
+
+#define DMA1_IT_GL1                        ((uint32_t)0x00000001)
+#define DMA1_IT_TC1                        ((uint32_t)0x00000002)
+#define DMA1_IT_HT1                        ((uint32_t)0x00000004)
+#define DMA1_IT_TE1                        ((uint32_t)0x00000008)
+#define DMA1_IT_GL2                        ((uint32_t)0x00000010)
+#define DMA1_IT_TC2                        ((uint32_t)0x00000020)
+#define DMA1_IT_HT2                        ((uint32_t)0x00000040)
+#define DMA1_IT_TE2                        ((uint32_t)0x00000080)
+#define DMA1_IT_GL3                        ((uint32_t)0x00000100)
+#define DMA1_IT_TC3                        ((uint32_t)0x00000200)
+#define DMA1_IT_HT3                        ((uint32_t)0x00000400)
+#define DMA1_IT_TE3                        ((uint32_t)0x00000800)
+#define DMA1_IT_GL4                        ((uint32_t)0x00001000)
+#define DMA1_IT_TC4                        ((uint32_t)0x00002000)
+#define DMA1_IT_HT4                        ((uint32_t)0x00004000)
+#define DMA1_IT_TE4                        ((uint32_t)0x00008000)
+#define DMA1_IT_GL5                        ((uint32_t)0x00010000)
+#define DMA1_IT_TC5                        ((uint32_t)0x00020000)
+#define DMA1_IT_HT5                        ((uint32_t)0x00040000)
+#define DMA1_IT_TE5                        ((uint32_t)0x00080000)
+#define DMA1_IT_GL6                        ((uint32_t)0x00100000)
+#define DMA1_IT_TC6                        ((uint32_t)0x00200000)
+#define DMA1_IT_HT6                        ((uint32_t)0x00400000)
+#define DMA1_IT_TE6                        ((uint32_t)0x00800000)
+#define DMA1_IT_GL7                        ((uint32_t)0x01000000)
+#define DMA1_IT_TC7                        ((uint32_t)0x02000000)
+#define DMA1_IT_HT7                        ((uint32_t)0x04000000)
+#define DMA1_IT_TE7                        ((uint32_t)0x08000000)
+
+#define DMA2_IT_GL1                        ((uint32_t)0x10000001)
+#define DMA2_IT_TC1                        ((uint32_t)0x10000002)
+#define DMA2_IT_HT1                        ((uint32_t)0x10000004)
+#define DMA2_IT_TE1                        ((uint32_t)0x10000008)
+#define DMA2_IT_GL2                        ((uint32_t)0x10000010)
+#define DMA2_IT_TC2                        ((uint32_t)0x10000020)
+#define DMA2_IT_HT2                        ((uint32_t)0x10000040)
+#define DMA2_IT_TE2                        ((uint32_t)0x10000080)
+#define DMA2_IT_GL3                        ((uint32_t)0x10000100)
+#define DMA2_IT_TC3                        ((uint32_t)0x10000200)
+#define DMA2_IT_HT3                        ((uint32_t)0x10000400)
+#define DMA2_IT_TE3                        ((uint32_t)0x10000800)
+#define DMA2_IT_GL4                        ((uint32_t)0x10001000)
+#define DMA2_IT_TC4                        ((uint32_t)0x10002000)
+#define DMA2_IT_HT4                        ((uint32_t)0x10004000)
+#define DMA2_IT_TE4                        ((uint32_t)0x10008000)
+#define DMA2_IT_GL5                        ((uint32_t)0x10010000)
+#define DMA2_IT_TC5                        ((uint32_t)0x10020000)
+#define DMA2_IT_HT5                        ((uint32_t)0x10040000)
+#define DMA2_IT_TE5                        ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00))
+
+#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
+                           ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
+                           ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
+                           ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
+                           ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
+                           ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
+                           ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
+                           ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
+                           ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
+                           ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
+                           ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
+                           ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
+                           ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
+                           ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \
+                           ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \
+                           ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \
+                           ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \
+                           ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \
+                           ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \
+                           ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \
+                           ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \
+                           ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \
+                           ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \
+                           ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5))
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flags_definition 
+  * @{
+  */
+#define DMA1_FLAG_GL1                      ((uint32_t)0x00000001)
+#define DMA1_FLAG_TC1                      ((uint32_t)0x00000002)
+#define DMA1_FLAG_HT1                      ((uint32_t)0x00000004)
+#define DMA1_FLAG_TE1                      ((uint32_t)0x00000008)
+#define DMA1_FLAG_GL2                      ((uint32_t)0x00000010)
+#define DMA1_FLAG_TC2                      ((uint32_t)0x00000020)
+#define DMA1_FLAG_HT2                      ((uint32_t)0x00000040)
+#define DMA1_FLAG_TE2                      ((uint32_t)0x00000080)
+#define DMA1_FLAG_GL3                      ((uint32_t)0x00000100)
+#define DMA1_FLAG_TC3                      ((uint32_t)0x00000200)
+#define DMA1_FLAG_HT3                      ((uint32_t)0x00000400)
+#define DMA1_FLAG_TE3                      ((uint32_t)0x00000800)
+#define DMA1_FLAG_GL4                      ((uint32_t)0x00001000)
+#define DMA1_FLAG_TC4                      ((uint32_t)0x00002000)
+#define DMA1_FLAG_HT4                      ((uint32_t)0x00004000)
+#define DMA1_FLAG_TE4                      ((uint32_t)0x00008000)
+#define DMA1_FLAG_GL5                      ((uint32_t)0x00010000)
+#define DMA1_FLAG_TC5                      ((uint32_t)0x00020000)
+#define DMA1_FLAG_HT5                      ((uint32_t)0x00040000)
+#define DMA1_FLAG_TE5                      ((uint32_t)0x00080000)
+#define DMA1_FLAG_GL6                      ((uint32_t)0x00100000)
+#define DMA1_FLAG_TC6                      ((uint32_t)0x00200000)
+#define DMA1_FLAG_HT6                      ((uint32_t)0x00400000)
+#define DMA1_FLAG_TE6                      ((uint32_t)0x00800000)
+#define DMA1_FLAG_GL7                      ((uint32_t)0x01000000)
+#define DMA1_FLAG_TC7                      ((uint32_t)0x02000000)
+#define DMA1_FLAG_HT7                      ((uint32_t)0x04000000)
+#define DMA1_FLAG_TE7                      ((uint32_t)0x08000000)
+
+#define DMA2_FLAG_GL1                      ((uint32_t)0x10000001)
+#define DMA2_FLAG_TC1                      ((uint32_t)0x10000002)
+#define DMA2_FLAG_HT1                      ((uint32_t)0x10000004)
+#define DMA2_FLAG_TE1                      ((uint32_t)0x10000008)
+#define DMA2_FLAG_GL2                      ((uint32_t)0x10000010)
+#define DMA2_FLAG_TC2                      ((uint32_t)0x10000020)
+#define DMA2_FLAG_HT2                      ((uint32_t)0x10000040)
+#define DMA2_FLAG_TE2                      ((uint32_t)0x10000080)
+#define DMA2_FLAG_GL3                      ((uint32_t)0x10000100)
+#define DMA2_FLAG_TC3                      ((uint32_t)0x10000200)
+#define DMA2_FLAG_HT3                      ((uint32_t)0x10000400)
+#define DMA2_FLAG_TE3                      ((uint32_t)0x10000800)
+#define DMA2_FLAG_GL4                      ((uint32_t)0x10001000)
+#define DMA2_FLAG_TC4                      ((uint32_t)0x10002000)
+#define DMA2_FLAG_HT4                      ((uint32_t)0x10004000)
+#define DMA2_FLAG_TE4                      ((uint32_t)0x10008000)
+#define DMA2_FLAG_GL5                      ((uint32_t)0x10010000)
+#define DMA2_FLAG_TC5                      ((uint32_t)0x10020000)
+#define DMA2_FLAG_HT5                      ((uint32_t)0x10040000)
+#define DMA2_FLAG_TE5                      ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00))
+
+#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
+                               ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
+                               ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
+                               ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
+                               ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
+                               ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
+                               ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
+                               ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
+                               ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
+                               ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
+                               ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
+                               ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
+                               ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
+                               ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \
+                               ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \
+                               ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \
+                               ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \
+                               ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \
+                               ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \
+                               ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \
+                               ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \
+                               ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \
+                               ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \
+                               ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Buffer_Size 
+  * @{
+  */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions
+  * @{
+  */
+
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); 
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
+void DMA_ClearFlag(uint32_t DMAy_FLAG);
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
+void DMA_ClearITPendingBit(uint32_t DMAy_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DMA_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_exti.h

@@ -0,0 +1,182 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_exti.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the EXTI firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_EXTI_H
+#define __STM32F10x_EXTI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup EXTI
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  EXTI mode enumeration  
+  */
+
+typedef enum
+{
+  EXTI_Mode_Interrupt = 0x00,
+  EXTI_Mode_Event = 0x04
+}EXTIMode_TypeDef;
+
+#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
+
+/** 
+  * @brief  EXTI Trigger enumeration  
+  */
+
+typedef enum
+{
+  EXTI_Trigger_Rising = 0x08,
+  EXTI_Trigger_Falling = 0x0C,  
+  EXTI_Trigger_Rising_Falling = 0x10
+}EXTITrigger_TypeDef;
+
+#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
+                                  ((TRIGGER) == EXTI_Trigger_Falling) || \
+                                  ((TRIGGER) == EXTI_Trigger_Rising_Falling))
+/** 
+  * @brief  EXTI Init Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t EXTI_Line;               /*!< Specifies the EXTI lines to be enabled or disabled.
+                                         This parameter can be any combination of @ref EXTI_Lines */
+   
+  EXTIMode_TypeDef EXTI_Mode;       /*!< Specifies the mode for the EXTI lines.
+                                         This parameter can be a value of @ref EXTIMode_TypeDef */
+
+  EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+                                         This parameter can be a value of @ref EXTITrigger_TypeDef */
+
+  FunctionalState EXTI_LineCmd;     /*!< Specifies the new state of the selected EXTI lines.
+                                         This parameter can be set either to ENABLE or DISABLE */ 
+}EXTI_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Lines 
+  * @{
+  */
+
+#define EXTI_Line0       ((uint32_t)0x00001)  /*!< External interrupt line 0 */
+#define EXTI_Line1       ((uint32_t)0x00002)  /*!< External interrupt line 1 */
+#define EXTI_Line2       ((uint32_t)0x00004)  /*!< External interrupt line 2 */
+#define EXTI_Line3       ((uint32_t)0x00008)  /*!< External interrupt line 3 */
+#define EXTI_Line4       ((uint32_t)0x00010)  /*!< External interrupt line 4 */
+#define EXTI_Line5       ((uint32_t)0x00020)  /*!< External interrupt line 5 */
+#define EXTI_Line6       ((uint32_t)0x00040)  /*!< External interrupt line 6 */
+#define EXTI_Line7       ((uint32_t)0x00080)  /*!< External interrupt line 7 */
+#define EXTI_Line8       ((uint32_t)0x00100)  /*!< External interrupt line 8 */
+#define EXTI_Line9       ((uint32_t)0x00200)  /*!< External interrupt line 9 */
+#define EXTI_Line10      ((uint32_t)0x00400)  /*!< External interrupt line 10 */
+#define EXTI_Line11      ((uint32_t)0x00800)  /*!< External interrupt line 11 */
+#define EXTI_Line12      ((uint32_t)0x01000)  /*!< External interrupt line 12 */
+#define EXTI_Line13      ((uint32_t)0x02000)  /*!< External interrupt line 13 */
+#define EXTI_Line14      ((uint32_t)0x04000)  /*!< External interrupt line 14 */
+#define EXTI_Line15      ((uint32_t)0x08000)  /*!< External interrupt line 15 */
+#define EXTI_Line16      ((uint32_t)0x10000)  /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_Line17      ((uint32_t)0x20000)  /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define EXTI_Line18      ((uint32_t)0x40000)  /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS
+                                                   Wakeup from suspend event */                                    
+#define EXTI_Line19      ((uint32_t)0x80000)  /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+                                          
+#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00))
+#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
+                            ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
+                            ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
+                            ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
+                            ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
+                            ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
+                            ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
+                            ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
+                            ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
+                            ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19))
+
+                    
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions
+  * @{
+  */
+
+void EXTI_DeInit(void);
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
+void EXTI_ClearFlag(uint32_t EXTI_Line);
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_EXTI_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_flash.h

@@ -0,0 +1,424 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_flash.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the FLASH 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FLASH_H
+#define __STM32F10x_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+
+/** @defgroup FLASH_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  FLASH Status  
+  */
+
+typedef enum
+{ 
+  FLASH_BUSY = 1,
+  FLASH_ERROR_PG,
+  FLASH_ERROR_WRP,
+  FLASH_COMPLETE,
+  FLASH_TIMEOUT
+}FLASH_Status;
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Constants
+  * @{
+  */
+
+/** @defgroup Flash_Latency 
+  * @{
+  */
+
+#define FLASH_Latency_0                ((uint32_t)0x00000000)  /*!< FLASH Zero Latency cycle */
+#define FLASH_Latency_1                ((uint32_t)0x00000001)  /*!< FLASH One Latency cycle */
+#define FLASH_Latency_2                ((uint32_t)0x00000002)  /*!< FLASH Two Latency cycles */
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
+                                   ((LATENCY) == FLASH_Latency_1) || \
+                                   ((LATENCY) == FLASH_Latency_2))
+/**
+  * @}
+  */
+
+/** @defgroup Half_Cycle_Enable_Disable 
+  * @{
+  */
+
+#define FLASH_HalfCycleAccess_Enable   ((uint32_t)0x00000008)  /*!< FLASH Half Cycle Enable */
+#define FLASH_HalfCycleAccess_Disable  ((uint32_t)0x00000000)  /*!< FLASH Half Cycle Disable */
+#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
+                                               ((STATE) == FLASH_HalfCycleAccess_Disable)) 
+/**
+  * @}
+  */
+
+/** @defgroup Prefetch_Buffer_Enable_Disable 
+  * @{
+  */
+
+#define FLASH_PrefetchBuffer_Enable    ((uint32_t)0x00000010)  /*!< FLASH Prefetch Buffer Enable */
+#define FLASH_PrefetchBuffer_Disable   ((uint32_t)0x00000000)  /*!< FLASH Prefetch Buffer Disable */
+#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
+                                              ((STATE) == FLASH_PrefetchBuffer_Disable)) 
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_Write_Protection 
+  * @{
+  */
+
+/* Values to be used with STM32 Low and Medium density devices */
+#define FLASH_WRProt_Pages0to3         ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */
+#define FLASH_WRProt_Pages4to7         ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */
+#define FLASH_WRProt_Pages8to11        ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */
+#define FLASH_WRProt_Pages12to15       ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */
+#define FLASH_WRProt_Pages16to19       ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */
+#define FLASH_WRProt_Pages20to23       ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */
+#define FLASH_WRProt_Pages24to27       ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */
+#define FLASH_WRProt_Pages28to31       ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */
+
+/* Values to be used with STM32 Medium-density devices */
+#define FLASH_WRProt_Pages32to35       ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */
+#define FLASH_WRProt_Pages36to39       ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */
+#define FLASH_WRProt_Pages40to43       ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */
+#define FLASH_WRProt_Pages44to47       ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */
+#define FLASH_WRProt_Pages48to51       ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */
+#define FLASH_WRProt_Pages52to55       ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */
+#define FLASH_WRProt_Pages56to59       ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */
+#define FLASH_WRProt_Pages60to63       ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */
+#define FLASH_WRProt_Pages64to67       ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */
+#define FLASH_WRProt_Pages68to71       ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */
+#define FLASH_WRProt_Pages72to75       ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */
+#define FLASH_WRProt_Pages76to79       ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */
+#define FLASH_WRProt_Pages80to83       ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */
+#define FLASH_WRProt_Pages84to87       ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */
+#define FLASH_WRProt_Pages88to91       ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */
+#define FLASH_WRProt_Pages92to95       ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */
+#define FLASH_WRProt_Pages96to99       ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */
+#define FLASH_WRProt_Pages100to103     ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */
+#define FLASH_WRProt_Pages104to107     ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */
+#define FLASH_WRProt_Pages108to111     ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */
+#define FLASH_WRProt_Pages112to115     ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */
+#define FLASH_WRProt_Pages116to119     ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */
+#define FLASH_WRProt_Pages120to123     ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */
+#define FLASH_WRProt_Pages124to127     ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */
+
+/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */
+#define FLASH_WRProt_Pages0to1         ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 0 to 1 */
+#define FLASH_WRProt_Pages2to3         ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 2 to 3 */
+#define FLASH_WRProt_Pages4to5         ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 4 to 5 */
+#define FLASH_WRProt_Pages6to7         ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 6 to 7 */
+#define FLASH_WRProt_Pages8to9         ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 8 to 9 */
+#define FLASH_WRProt_Pages10to11       ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 10 to 11 */
+#define FLASH_WRProt_Pages12to13       ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 12 to 13 */
+#define FLASH_WRProt_Pages14to15       ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 14 to 15 */
+#define FLASH_WRProt_Pages16to17       ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 16 to 17 */
+#define FLASH_WRProt_Pages18to19       ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 18 to 19 */
+#define FLASH_WRProt_Pages20to21       ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 20 to 21 */
+#define FLASH_WRProt_Pages22to23       ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 22 to 23 */
+#define FLASH_WRProt_Pages24to25       ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 24 to 25 */
+#define FLASH_WRProt_Pages26to27       ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 26 to 27 */
+#define FLASH_WRProt_Pages28to29       ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 28 to 29 */
+#define FLASH_WRProt_Pages30to31       ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 30 to 31 */
+#define FLASH_WRProt_Pages32to33       ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 32 to 33 */
+#define FLASH_WRProt_Pages34to35       ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 34 to 35 */
+#define FLASH_WRProt_Pages36to37       ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 36 to 37 */
+#define FLASH_WRProt_Pages38to39       ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 38 to 39 */
+#define FLASH_WRProt_Pages40to41       ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 40 to 41 */
+#define FLASH_WRProt_Pages42to43       ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 42 to 43 */
+#define FLASH_WRProt_Pages44to45       ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 44 to 45 */
+#define FLASH_WRProt_Pages46to47       ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 46 to 47 */
+#define FLASH_WRProt_Pages48to49       ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 48 to 49 */
+#define FLASH_WRProt_Pages50to51       ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 50 to 51 */
+#define FLASH_WRProt_Pages52to53       ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 52 to 53 */
+#define FLASH_WRProt_Pages54to55       ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 54 to 55 */
+#define FLASH_WRProt_Pages56to57       ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 56 to 57 */
+#define FLASH_WRProt_Pages58to59       ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 58 to 59 */
+#define FLASH_WRProt_Pages60to61       ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 60 to 61 */
+#define FLASH_WRProt_Pages62to127      ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */
+#define FLASH_WRProt_Pages62to255      ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */
+#define FLASH_WRProt_Pages62to511      ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */
+
+#define FLASH_WRProt_AllPages          ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
+
+#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_IWatchdog 
+  * @{
+  */
+
+#define OB_IWDG_SW                     ((uint16_t)0x0001)  /*!< Software IWDG selected */
+#define OB_IWDG_HW                     ((uint16_t)0x0000)  /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_nRST_STOP 
+  * @{
+  */
+
+#define OB_STOP_NoRST                  ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST                    ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
+
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_nRST_STDBY 
+  * @{
+  */
+
+#define OB_STDBY_NoRST                 ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST                   ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
+
+#ifdef STM32F10X_XL
+/**
+  * @}
+  */
+/** @defgroup FLASH_Boot
+  * @{
+  */
+#define FLASH_BOOT_Bank1  ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position
+                                                  and this parameter is selected the device will boot from Bank1(Default) */
+#define FLASH_BOOT_Bank2  ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position
+                                                  and this parameter is selected the device will boot from Bank 2 or Bank 1,
+                                                  depending on the activation of the bank */
+#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2))
+#endif
+/**
+  * @}
+  */
+/** @defgroup FLASH_Interrupts 
+  * @{
+  */
+#ifdef STM32F10X_XL
+#define FLASH_IT_BANK2_ERROR                 ((uint32_t)0x80000400)  /*!< FPEC BANK2 error interrupt source */
+#define FLASH_IT_BANK2_EOP                   ((uint32_t)0x80001000)  /*!< End of FLASH BANK2 Operation Interrupt source */
+
+#define FLASH_IT_BANK1_ERROR                 FLASH_IT_ERROR          /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP                   FLASH_IT_EOP            /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define FLASH_IT_ERROR                 ((uint32_t)0x00000400)  /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_EOP                   ((uint32_t)0x00001000)  /*!< End of FLASH BANK1 Operation Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#else
+#define FLASH_IT_ERROR                 ((uint32_t)0x00000400)  /*!< FPEC error interrupt source */
+#define FLASH_IT_EOP                   ((uint32_t)0x00001000)  /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_BANK1_ERROR           FLASH_IT_ERROR          /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP             FLASH_IT_EOP            /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flags 
+  * @{
+  */
+#ifdef STM32F10X_XL
+#define FLASH_FLAG_BANK2_BSY                 ((uint32_t)0x80000001)  /*!< FLASH BANK2 Busy flag */
+#define FLASH_FLAG_BANK2_EOP                 ((uint32_t)0x80000020)  /*!< FLASH BANK2 End of Operation flag */
+#define FLASH_FLAG_BANK2_PGERR               ((uint32_t)0x80000004)  /*!< FLASH BANK2 Program error flag */
+#define FLASH_FLAG_BANK2_WRPRTERR            ((uint32_t)0x80000010)  /*!< FLASH BANK2 Write protected error flag */
+
+#define FLASH_FLAG_BANK1_BSY                 FLASH_FLAG_BSY       /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP                 FLASH_FLAG_EOP       /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR               FLASH_FLAG_PGERR     /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR            FLASH_FLAG_WRPRTERR  /*!< FLASH BANK1 Write protected error flag */
+
+#define FLASH_FLAG_BSY                 ((uint32_t)0x00000001)  /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP                 ((uint32_t)0x00000020)  /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR               ((uint32_t)0x00000004)  /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR            ((uint32_t)0x00000010)  /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR              ((uint32_t)0x00000001)  /*!< FLASH Option Byte error flag */
+ 
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG)  (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+                                  ((FLAG) == FLASH_FLAG_OPTERR)|| \
+                                  ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+                                  ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR))
+#else
+#define FLASH_FLAG_BSY                 ((uint32_t)0x00000001)  /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP                 ((uint32_t)0x00000020)  /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR               ((uint32_t)0x00000004)  /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR            ((uint32_t)0x00000010)  /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR              ((uint32_t)0x00000001)  /*!< FLASH Option Byte error flag */
+
+#define FLASH_FLAG_BANK1_BSY                 FLASH_FLAG_BSY       /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP                 FLASH_FLAG_EOP       /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR               FLASH_FLAG_PGERR     /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR            FLASH_FLAG_WRPRTERR  /*!< FLASH BANK1 Write protected error flag */
+ 
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG)  (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+								  ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+                                  ((FLAG) == FLASH_FLAG_OPTERR))
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions
+  * @{
+  */
+
+/*------------ Functions used for all STM32F10x devices -----*/
+void FLASH_SetLatency(uint32_t FLASH_Latency);
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess);
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer);
+void FLASH_Unlock(void);
+void FLASH_Lock(void);
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
+FLASH_Status FLASH_EraseAllPages(void);
+FLASH_Status FLASH_EraseOptionBytes(void);
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data);
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages);
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY);
+uint32_t FLASH_GetUserOptionByte(void);
+uint32_t FLASH_GetWriteProtectionOptionByte(void);
+FlagStatus FLASH_GetReadOutProtectionStatus(void);
+FlagStatus FLASH_GetPrefetchBufferStatus(void);
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
+void FLASH_ClearFlag(uint32_t FLASH_FLAG);
+FLASH_Status FLASH_GetStatus(void);
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/*------------ New function used for all STM32F10x devices -----*/
+void FLASH_UnlockBank1(void);
+void FLASH_LockBank1(void);
+FLASH_Status FLASH_EraseAllBank1Pages(void);
+FLASH_Status FLASH_GetBank1Status(void);
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout);
+
+#ifdef STM32F10X_XL
+/*---- New Functions used only with STM32F10x_XL density devices -----*/
+void FLASH_UnlockBank2(void);
+void FLASH_LockBank2(void);
+FLASH_Status FLASH_EraseAllBank2Pages(void);
+FLASH_Status FLASH_GetBank2Status(void);
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout);
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_FLASH_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_fsmc.h

@@ -0,0 +1,731 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_fsmc.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the FSMC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FSMC_H
+#define __STM32F10x_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup FSMC
+  * @{
+  */
+
+/** @defgroup FSMC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  Timing parameters For NOR/SRAM Banks  
+  */
+
+typedef struct
+{
+  uint32_t FSMC_AddressSetupTime;       /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the address setup time. 
+                                             This parameter can be a value between 0 and 0xF.
+                                             @note: It is not used with synchronous NOR Flash memories. */
+
+  uint32_t FSMC_AddressHoldTime;        /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the address hold time.
+                                             This parameter can be a value between 0 and 0xF. 
+                                             @note: It is not used with synchronous NOR Flash memories.*/
+
+  uint32_t FSMC_DataSetupTime;          /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the data setup time.
+                                             This parameter can be a value between 0 and 0xFF.
+                                             @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
+
+  uint32_t FSMC_BusTurnAroundDuration;  /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the bus turnaround.
+                                             This parameter can be a value between 0 and 0xF.
+                                             @note: It is only used for multiplexed NOR Flash memories. */
+
+  uint32_t FSMC_CLKDivision;            /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
+                                             This parameter can be a value between 1 and 0xF.
+                                             @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
+
+  uint32_t FSMC_DataLatency;            /*!< Defines the number of memory clock cycles to issue
+                                             to the memory before getting the first data.
+                                             The value of this parameter depends on the memory type as shown below:
+                                              - It must be set to 0 in case of a CRAM
+                                              - It is don't care in asynchronous NOR, SRAM or ROM accesses
+                                              - It may assume a value between 0 and 0xF in NOR Flash memories
+                                                with synchronous burst mode enable */
+
+  uint32_t FSMC_AccessMode;             /*!< Specifies the asynchronous access mode. 
+                                             This parameter can be a value of @ref FSMC_Access_Mode */
+}FSMC_NORSRAMTimingInitTypeDef;
+
+/** 
+  * @brief  FSMC NOR/SRAM Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t FSMC_Bank;                /*!< Specifies the NOR/SRAM memory bank that will be used.
+                                          This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+  uint32_t FSMC_DataAddressMux;      /*!< Specifies whether the address and data values are
+                                          multiplexed on the databus or not. 
+                                          This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+  uint32_t FSMC_MemoryType;          /*!< Specifies the type of external memory attached to
+                                          the corresponding memory bank.
+                                          This parameter can be a value of @ref FSMC_Memory_Type */
+
+  uint32_t FSMC_MemoryDataWidth;     /*!< Specifies the external memory device width.
+                                          This parameter can be a value of @ref FSMC_Data_Width */
+
+  uint32_t FSMC_BurstAccessMode;     /*!< Enables or disables the burst access mode for Flash memory,
+                                          valid only with synchronous burst Flash memories.
+                                          This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+                                       
+  uint32_t FSMC_AsynchronousWait;     /*!< Enables or disables wait signal during asynchronous transfers,
+                                          valid only with asynchronous Flash memories.
+                                          This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+  uint32_t FSMC_WaitSignalPolarity;  /*!< Specifies the wait signal polarity, valid only when accessing
+                                          the Flash memory in burst mode.
+                                          This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+  uint32_t FSMC_WrapMode;            /*!< Enables or disables the Wrapped burst access mode for Flash
+                                          memory, valid only when accessing Flash memories in burst mode.
+                                          This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+  uint32_t FSMC_WaitSignalActive;    /*!< Specifies if the wait signal is asserted by the memory one
+                                          clock cycle before the wait state or during the wait state,
+                                          valid only when accessing memories in burst mode. 
+                                          This parameter can be a value of @ref FSMC_Wait_Timing */
+
+  uint32_t FSMC_WriteOperation;      /*!< Enables or disables the write operation in the selected bank by the FSMC. 
+                                          This parameter can be a value of @ref FSMC_Write_Operation */
+
+  uint32_t FSMC_WaitSignal;          /*!< Enables or disables the wait-state insertion via wait
+                                          signal, valid for Flash memory access in burst mode. 
+                                          This parameter can be a value of @ref FSMC_Wait_Signal */
+
+  uint32_t FSMC_ExtendedMode;        /*!< Enables or disables the extended mode.
+                                          This parameter can be a value of @ref FSMC_Extended_Mode */
+
+  uint32_t FSMC_WriteBurst;          /*!< Enables or disables the write burst operation.
+                                          This parameter can be a value of @ref FSMC_Write_Burst */ 
+
+  FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the  ExtendedMode is not used*/  
+
+  FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct;     /*!< Timing Parameters for write access if the  ExtendedMode is used*/      
+}FSMC_NORSRAMInitTypeDef;
+
+/** 
+  * @brief  Timing parameters For FSMC NAND and PCCARD Banks
+  */
+
+typedef struct
+{
+  uint32_t FSMC_SetupTime;      /*!< Defines the number of HCLK cycles to setup address before
+                                     the command assertion for NAND-Flash read or write access
+                                     to common/Attribute or I/O memory space (depending on
+                                     the memory space timing to be configured).
+                                     This parameter can be a value between 0 and 0xFF.*/
+
+  uint32_t FSMC_WaitSetupTime;  /*!< Defines the minimum number of HCLK cycles to assert the
+                                     command for NAND-Flash read or write access to
+                                     common/Attribute or I/O memory space (depending on the
+                                     memory space timing to be configured). 
+                                     This parameter can be a number between 0x00 and 0xFF */
+
+  uint32_t FSMC_HoldSetupTime;  /*!< Defines the number of HCLK clock cycles to hold address
+                                     (and data for write access) after the command deassertion
+                                     for NAND-Flash read or write access to common/Attribute
+                                     or I/O memory space (depending on the memory space timing
+                                     to be configured).
+                                     This parameter can be a number between 0x00 and 0xFF */
+
+  uint32_t FSMC_HiZSetupTime;   /*!< Defines the number of HCLK clock cycles during which the
+                                     databus is kept in HiZ after the start of a NAND-Flash
+                                     write access to common/Attribute or I/O memory space (depending
+                                     on the memory space timing to be configured).
+                                     This parameter can be a number between 0x00 and 0xFF */
+}FSMC_NAND_PCCARDTimingInitTypeDef;
+
+/** 
+  * @brief  FSMC NAND Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t FSMC_Bank;              /*!< Specifies the NAND memory bank that will be used.
+                                      This parameter can be a value of @ref FSMC_NAND_Bank */
+
+  uint32_t FSMC_Waitfeature;      /*!< Enables or disables the Wait feature for the NAND Memory Bank.
+                                       This parameter can be any value of @ref FSMC_Wait_feature */
+
+  uint32_t FSMC_MemoryDataWidth;  /*!< Specifies the external memory device width.
+                                       This parameter can be any value of @ref FSMC_Data_Width */
+
+  uint32_t FSMC_ECC;              /*!< Enables or disables the ECC computation.
+                                       This parameter can be any value of @ref FSMC_ECC */
+
+  uint32_t FSMC_ECCPageSize;      /*!< Defines the page size for the extended ECC.
+                                       This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+  uint32_t FSMC_TCLRSetupTime;    /*!< Defines the number of HCLK cycles to configure the
+                                       delay between CLE low and RE low.
+                                       This parameter can be a value between 0 and 0xFF. */
+
+  uint32_t FSMC_TARSetupTime;     /*!< Defines the number of HCLK cycles to configure the
+                                       delay between ALE low and RE low.
+                                       This parameter can be a number between 0x0 and 0xFF */ 
+
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_CommonSpaceTimingStruct;   /*!< FSMC Common Space Timing */ 
+
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+}FSMC_NANDInitTypeDef;
+
+/** 
+  * @brief  FSMC PCCARD Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t FSMC_Waitfeature;    /*!< Enables or disables the Wait feature for the Memory Bank.
+                                    This parameter can be any value of @ref FSMC_Wait_feature */
+
+  uint32_t FSMC_TCLRSetupTime;  /*!< Defines the number of HCLK cycles to configure the
+                                     delay between CLE low and RE low.
+                                     This parameter can be a value between 0 and 0xFF. */
+
+  uint32_t FSMC_TARSetupTime;   /*!< Defines the number of HCLK cycles to configure the
+                                     delay between ALE low and RE low.
+                                     This parameter can be a number between 0x0 and 0xFF */ 
+
+  
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_AttributeSpaceTimingStruct;  /*!< FSMC Attribute Space Timing */ 
+  
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */  
+}FSMC_PCCARDInitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup FSMC_NORSRAM_Bank 
+  * @{
+  */
+#define FSMC_Bank1_NORSRAM1                             ((uint32_t)0x00000000)
+#define FSMC_Bank1_NORSRAM2                             ((uint32_t)0x00000002)
+#define FSMC_Bank1_NORSRAM3                             ((uint32_t)0x00000004)
+#define FSMC_Bank1_NORSRAM4                             ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NAND_Bank 
+  * @{
+  */  
+#define FSMC_Bank2_NAND                                 ((uint32_t)0x00000010)
+#define FSMC_Bank3_NAND                                 ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_PCCARD_Bank 
+  * @{
+  */    
+#define FSMC_Bank4_PCCARD                               ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
+                                    ((BANK) == FSMC_Bank1_NORSRAM2) || \
+                                    ((BANK) == FSMC_Bank1_NORSRAM3) || \
+                                    ((BANK) == FSMC_Bank1_NORSRAM4))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+                                 ((BANK) == FSMC_Bank3_NAND))
+
+#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+                                    ((BANK) == FSMC_Bank3_NAND) || \
+                                    ((BANK) == FSMC_Bank4_PCCARD))
+
+#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+                               ((BANK) == FSMC_Bank3_NAND) || \
+                               ((BANK) == FSMC_Bank4_PCCARD))
+
+/** @defgroup NOR_SRAM_Controller 
+  * @{
+  */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing 
+  * @{
+  */
+
+#define FSMC_DataAddressMux_Disable                       ((uint32_t)0x00000000)
+#define FSMC_DataAddressMux_Enable                        ((uint32_t)0x00000002)
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
+                          ((MUX) == FSMC_DataAddressMux_Enable))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Memory_Type 
+  * @{
+  */
+
+#define FSMC_MemoryType_SRAM                            ((uint32_t)0x00000000)
+#define FSMC_MemoryType_PSRAM                           ((uint32_t)0x00000004)
+#define FSMC_MemoryType_NOR                             ((uint32_t)0x00000008)
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
+                                ((MEMORY) == FSMC_MemoryType_PSRAM)|| \
+                                ((MEMORY) == FSMC_MemoryType_NOR))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Width 
+  * @{
+  */
+
+#define FSMC_MemoryDataWidth_8b                         ((uint32_t)0x00000000)
+#define FSMC_MemoryDataWidth_16b                        ((uint32_t)0x00000010)
+#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
+                                     ((WIDTH) == FSMC_MemoryDataWidth_16b))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Burst_Access_Mode 
+  * @{
+  */
+
+#define FSMC_BurstAccessMode_Disable                    ((uint32_t)0x00000000) 
+#define FSMC_BurstAccessMode_Enable                     ((uint32_t)0x00000100)
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
+                                  ((STATE) == FSMC_BurstAccessMode_Enable))
+/**
+  * @}
+  */
+  
+/** @defgroup FSMC_AsynchronousWait 
+  * @{
+  */
+#define FSMC_AsynchronousWait_Disable                   ((uint32_t)0x00000000)
+#define FSMC_AsynchronousWait_Enable                    ((uint32_t)0x00008000)
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
+                                 ((STATE) == FSMC_AsynchronousWait_Enable))
+
+/**
+  * @}
+  */
+  
+/** @defgroup FSMC_Wait_Signal_Polarity 
+  * @{
+  */
+
+#define FSMC_WaitSignalPolarity_Low                     ((uint32_t)0x00000000)
+#define FSMC_WaitSignalPolarity_High                    ((uint32_t)0x00000200)
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
+                                         ((POLARITY) == FSMC_WaitSignalPolarity_High)) 
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wrap_Mode 
+  * @{
+  */
+
+#define FSMC_WrapMode_Disable                           ((uint32_t)0x00000000)
+#define FSMC_WrapMode_Enable                            ((uint32_t)0x00000400) 
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
+                                 ((MODE) == FSMC_WrapMode_Enable))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Timing 
+  * @{
+  */
+
+#define FSMC_WaitSignalActive_BeforeWaitState           ((uint32_t)0x00000000)
+#define FSMC_WaitSignalActive_DuringWaitState           ((uint32_t)0x00000800) 
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
+                                            ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Operation 
+  * @{
+  */
+
+#define FSMC_WriteOperation_Disable                     ((uint32_t)0x00000000)
+#define FSMC_WriteOperation_Enable                      ((uint32_t)0x00001000)
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
+                                            ((OPERATION) == FSMC_WriteOperation_Enable))
+                              
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Signal 
+  * @{
+  */
+
+#define FSMC_WaitSignal_Disable                         ((uint32_t)0x00000000)
+#define FSMC_WaitSignal_Enable                          ((uint32_t)0x00002000) 
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
+                                      ((SIGNAL) == FSMC_WaitSignal_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Extended_Mode 
+  * @{
+  */
+
+#define FSMC_ExtendedMode_Disable                       ((uint32_t)0x00000000)
+#define FSMC_ExtendedMode_Enable                        ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
+                                     ((MODE) == FSMC_ExtendedMode_Enable)) 
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Burst 
+  * @{
+  */
+
+#define FSMC_WriteBurst_Disable                         ((uint32_t)0x00000000)
+#define FSMC_WriteBurst_Enable                          ((uint32_t)0x00080000) 
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
+                                    ((BURST) == FSMC_WriteBurst_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Address_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Address_Hold_Time 
+  * @{
+  */
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration 
+  * @{
+  */
+
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_CLK_Division 
+  * @{
+  */
+
+#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Latency 
+  * @{
+  */
+
+#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Access_Mode 
+  * @{
+  */
+
+#define FSMC_AccessMode_A                               ((uint32_t)0x00000000)
+#define FSMC_AccessMode_B                               ((uint32_t)0x10000000) 
+#define FSMC_AccessMode_C                               ((uint32_t)0x20000000)
+#define FSMC_AccessMode_D                               ((uint32_t)0x30000000)
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
+                                   ((MODE) == FSMC_AccessMode_B) || \
+                                   ((MODE) == FSMC_AccessMode_C) || \
+                                   ((MODE) == FSMC_AccessMode_D)) 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/** @defgroup NAND_PCCARD_Controller 
+  * @{
+  */
+
+/** @defgroup FSMC_Wait_feature 
+  * @{
+  */
+
+#define FSMC_Waitfeature_Disable                        ((uint32_t)0x00000000)
+#define FSMC_Waitfeature_Enable                         ((uint32_t)0x00000002)
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
+                                       ((FEATURE) == FSMC_Waitfeature_Enable))
+
+/**
+  * @}
+  */
+
+
+/** @defgroup FSMC_ECC 
+  * @{
+  */
+
+#define FSMC_ECC_Disable                                ((uint32_t)0x00000000)
+#define FSMC_ECC_Enable                                 ((uint32_t)0x00000040)
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
+                                  ((STATE) == FSMC_ECC_Enable))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_ECC_Page_Size 
+  * @{
+  */
+
+#define FSMC_ECCPageSize_256Bytes                       ((uint32_t)0x00000000)
+#define FSMC_ECCPageSize_512Bytes                       ((uint32_t)0x00020000)
+#define FSMC_ECCPageSize_1024Bytes                      ((uint32_t)0x00040000)
+#define FSMC_ECCPageSize_2048Bytes                      ((uint32_t)0x00060000)
+#define FSMC_ECCPageSize_4096Bytes                      ((uint32_t)0x00080000)
+#define FSMC_ECCPageSize_8192Bytes                      ((uint32_t)0x000A0000)
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_512Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_8192Bytes))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_TCLR_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_TAR_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Hold_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_HiZ_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Interrupt_sources 
+  * @{
+  */
+
+#define FSMC_IT_RisingEdge                              ((uint32_t)0x00000008)
+#define FSMC_IT_Level                                   ((uint32_t)0x00000010)
+#define FSMC_IT_FallingEdge                             ((uint32_t)0x00000020)
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
+                            ((IT) == FSMC_IT_Level) || \
+                            ((IT) == FSMC_IT_FallingEdge)) 
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Flags 
+  * @{
+  */
+
+#define FSMC_FLAG_RisingEdge                            ((uint32_t)0x00000001)
+#define FSMC_FLAG_Level                                 ((uint32_t)0x00000002)
+#define FSMC_FLAG_FallingEdge                           ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT                                 ((uint32_t)0x00000040)
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
+                                ((FLAG) == FSMC_FLAG_Level) || \
+                                ((FLAG) == FSMC_FLAG_FallingEdge) || \
+                                ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Exported_Functions
+  * @{
+  */
+
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
+void FSMC_NANDDeInit(uint32_t FSMC_Bank);
+void FSMC_PCCARDDeInit(void);
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_PCCARDCmd(FunctionalState NewState);
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_FSMC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+

project_Template/Libraries/FWlib/inc/stm32f10x_gpio.h

@@ -0,0 +1,383 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_gpio.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the GPIO 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_GPIO_H
+#define __STM32F10x_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Types
+  * @{
+  */
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+                                    ((PERIPH) == GPIOB) || \
+                                    ((PERIPH) == GPIOC) || \
+                                    ((PERIPH) == GPIOD) || \
+                                    ((PERIPH) == GPIOE) || \
+                                    ((PERIPH) == GPIOF) || \
+                                    ((PERIPH) == GPIOG))
+                                     
+/** 
+  * @brief  Output Maximum frequency selection  
+  */
+
+typedef enum
+{ 
+  GPIO_Speed_10MHz = 1,
+  GPIO_Speed_2MHz, 
+  GPIO_Speed_50MHz
+}GPIOSpeed_TypeDef;
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
+                              ((SPEED) == GPIO_Speed_50MHz))
+
+/** 
+  * @brief  Configuration Mode enumeration  
+  */
+
+typedef enum
+{ GPIO_Mode_AIN = 0x0,
+  GPIO_Mode_IN_FLOATING = 0x04,
+  GPIO_Mode_IPD = 0x28,
+  GPIO_Mode_IPU = 0x48,
+  GPIO_Mode_Out_OD = 0x14,
+  GPIO_Mode_Out_PP = 0x10,
+  GPIO_Mode_AF_OD = 0x1C,
+  GPIO_Mode_AF_PP = 0x18
+}GPIOMode_TypeDef;
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
+                            ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
+                            ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
+                            ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
+
+/** 
+  * @brief  GPIO Init structure definition  
+  */
+
+typedef struct
+{
+  uint16_t GPIO_Pin;             /*!< Specifies the GPIO pins to be configured.
+                                      This parameter can be any value of @ref GPIO_pins_define */
+
+  GPIOSpeed_TypeDef GPIO_Speed;  /*!< Specifies the speed for the selected pins.
+                                      This parameter can be a value of @ref GPIOSpeed_TypeDef */
+
+  GPIOMode_TypeDef GPIO_Mode;    /*!< Specifies the operating mode for the selected pins.
+                                      This parameter can be a value of @ref GPIOMode_TypeDef */
+}GPIO_InitTypeDef;
+
+
+/** 
+  * @brief  Bit_SET and Bit_RESET enumeration  
+  */
+
+typedef enum
+{ Bit_RESET = 0,
+  Bit_SET
+}BitAction;
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define 
+  * @{
+  */
+
+#define GPIO_Pin_0                 ((uint16_t)0x0001)  /*!< Pin 0 selected */
+#define GPIO_Pin_1                 ((uint16_t)0x0002)  /*!< Pin 1 selected */
+#define GPIO_Pin_2                 ((uint16_t)0x0004)  /*!< Pin 2 selected */
+#define GPIO_Pin_3                 ((uint16_t)0x0008)  /*!< Pin 3 selected */
+#define GPIO_Pin_4                 ((uint16_t)0x0010)  /*!< Pin 4 selected */
+#define GPIO_Pin_5                 ((uint16_t)0x0020)  /*!< Pin 5 selected */
+#define GPIO_Pin_6                 ((uint16_t)0x0040)  /*!< Pin 6 selected */
+#define GPIO_Pin_7                 ((uint16_t)0x0080)  /*!< Pin 7 selected */
+#define GPIO_Pin_8                 ((uint16_t)0x0100)  /*!< Pin 8 selected */
+#define GPIO_Pin_9                 ((uint16_t)0x0200)  /*!< Pin 9 selected */
+#define GPIO_Pin_10                ((uint16_t)0x0400)  /*!< Pin 10 selected */
+#define GPIO_Pin_11                ((uint16_t)0x0800)  /*!< Pin 11 selected */
+#define GPIO_Pin_12                ((uint16_t)0x1000)  /*!< Pin 12 selected */
+#define GPIO_Pin_13                ((uint16_t)0x2000)  /*!< Pin 13 selected */
+#define GPIO_Pin_14                ((uint16_t)0x4000)  /*!< Pin 14 selected */
+#define GPIO_Pin_15                ((uint16_t)0x8000)  /*!< Pin 15 selected */
+#define GPIO_Pin_All               ((uint16_t)0xFFFF)  /*!< All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
+
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+                              ((PIN) == GPIO_Pin_1) || \
+                              ((PIN) == GPIO_Pin_2) || \
+                              ((PIN) == GPIO_Pin_3) || \
+                              ((PIN) == GPIO_Pin_4) || \
+                              ((PIN) == GPIO_Pin_5) || \
+                              ((PIN) == GPIO_Pin_6) || \
+                              ((PIN) == GPIO_Pin_7) || \
+                              ((PIN) == GPIO_Pin_8) || \
+                              ((PIN) == GPIO_Pin_9) || \
+                              ((PIN) == GPIO_Pin_10) || \
+                              ((PIN) == GPIO_Pin_11) || \
+                              ((PIN) == GPIO_Pin_12) || \
+                              ((PIN) == GPIO_Pin_13) || \
+                              ((PIN) == GPIO_Pin_14) || \
+                              ((PIN) == GPIO_Pin_15))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Remap_define 
+  * @{
+  */
+
+#define GPIO_Remap_SPI1             ((uint32_t)0x00000001)  /*!< SPI1 Alternate Function mapping */
+#define GPIO_Remap_I2C1             ((uint32_t)0x00000002)  /*!< I2C1 Alternate Function mapping */
+#define GPIO_Remap_USART1           ((uint32_t)0x00000004)  /*!< USART1 Alternate Function mapping */
+#define GPIO_Remap_USART2           ((uint32_t)0x00000008)  /*!< USART2 Alternate Function mapping */
+#define GPIO_PartialRemap_USART3    ((uint32_t)0x00140010)  /*!< USART3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_USART3       ((uint32_t)0x00140030)  /*!< USART3 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM1      ((uint32_t)0x00160040)  /*!< TIM1 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM1         ((uint32_t)0x001600C0)  /*!< TIM1 Full Alternate Function mapping */
+#define GPIO_PartialRemap1_TIM2     ((uint32_t)0x00180100)  /*!< TIM2 Partial1 Alternate Function mapping */
+#define GPIO_PartialRemap2_TIM2     ((uint32_t)0x00180200)  /*!< TIM2 Partial2 Alternate Function mapping */
+#define GPIO_FullRemap_TIM2         ((uint32_t)0x00180300)  /*!< TIM2 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM3      ((uint32_t)0x001A0800)  /*!< TIM3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM3         ((uint32_t)0x001A0C00)  /*!< TIM3 Full Alternate Function mapping */
+#define GPIO_Remap_TIM4             ((uint32_t)0x00001000)  /*!< TIM4 Alternate Function mapping */
+#define GPIO_Remap1_CAN1            ((uint32_t)0x001D4000)  /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap2_CAN1            ((uint32_t)0x001D6000)  /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap_PD01             ((uint32_t)0x00008000)  /*!< PD01 Alternate Function mapping */
+#define GPIO_Remap_TIM5CH4_LSI      ((uint32_t)0x00200001)  /*!< LSI connected to TIM5 Channel4 input capture for calibration */
+#define GPIO_Remap_ADC1_ETRGINJ     ((uint32_t)0x00200002)  /*!< ADC1 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC1_ETRGREG     ((uint32_t)0x00200004)  /*!< ADC1 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGINJ     ((uint32_t)0x00200008)  /*!< ADC2 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGREG     ((uint32_t)0x00200010)  /*!< ADC2 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ETH              ((uint32_t)0x00200020)  /*!< Ethernet remapping (only for Connectivity line devices) */
+#define GPIO_Remap_CAN2             ((uint32_t)0x00200040)  /*!< CAN2 remapping (only for Connectivity line devices) */
+#define GPIO_Remap_SWJ_NoJTRST      ((uint32_t)0x00300100)  /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
+#define GPIO_Remap_SWJ_JTAGDisable  ((uint32_t)0x00300200)  /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define GPIO_Remap_SWJ_Disable      ((uint32_t)0x00300400)  /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
+#define GPIO_Remap_SPI3             ((uint32_t)0x00201100)  /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
+#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000)  /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+                                                                 to TIM2 Internal Trigger 1 for calibration
+                                                                 (only for Connectivity line devices) */
+#define GPIO_Remap_PTP_PPS          ((uint32_t)0x00204000)  /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
+
+#define GPIO_Remap_TIM15            ((uint32_t)0x80000001)  /*!< TIM15 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM16            ((uint32_t)0x80000002)  /*!< TIM16 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM17            ((uint32_t)0x80000004)  /*!< TIM17 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_CEC              ((uint32_t)0x80000008)  /*!< CEC Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM1_DMA         ((uint32_t)0x80000010)  /*!< TIM1 DMA requests mapping (only for Value line devices) */
+
+#define GPIO_Remap_TIM9             ((uint32_t)0x80000020)  /*!< TIM9 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM10            ((uint32_t)0x80000040)  /*!< TIM10 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM11            ((uint32_t)0x80000080)  /*!< TIM11 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM13            ((uint32_t)0x80000100)  /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_TIM14            ((uint32_t)0x80000200)  /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_FSMC_NADV        ((uint32_t)0x80000400)  /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */
+
+#define GPIO_Remap_TIM67_DAC_DMA    ((uint32_t)0x80000800)  /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */
+#define GPIO_Remap_TIM12            ((uint32_t)0x80001000)  /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */
+#define GPIO_Remap_MISC             ((uint32_t)0x80002000)  /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, 
+                                                                 only for High density Value line devices) */                                                       
+
+#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
+                              ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
+                              ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
+                              ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
+                              ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
+                              ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
+                              ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
+                              ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \
+                              ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
+                              ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
+                              ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
+                              ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \
+                              ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \
+                              ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \
+                              ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \
+                              ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \
+                              ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \
+                              ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \
+                              ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \
+                              ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \
+                              ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \
+                              ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC))
+                              
+/**
+  * @}
+  */ 
+
+/** @defgroup GPIO_Port_Sources 
+  * @{
+  */
+
+#define GPIO_PortSourceGPIOA       ((uint8_t)0x00)
+#define GPIO_PortSourceGPIOB       ((uint8_t)0x01)
+#define GPIO_PortSourceGPIOC       ((uint8_t)0x02)
+#define GPIO_PortSourceGPIOD       ((uint8_t)0x03)
+#define GPIO_PortSourceGPIOE       ((uint8_t)0x04)
+#define GPIO_PortSourceGPIOF       ((uint8_t)0x05)
+#define GPIO_PortSourceGPIOG       ((uint8_t)0x06)
+#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOE))
+
+#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOG))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Pin_sources 
+  * @{
+  */
+
+#define GPIO_PinSource0            ((uint8_t)0x00)
+#define GPIO_PinSource1            ((uint8_t)0x01)
+#define GPIO_PinSource2            ((uint8_t)0x02)
+#define GPIO_PinSource3            ((uint8_t)0x03)
+#define GPIO_PinSource4            ((uint8_t)0x04)
+#define GPIO_PinSource5            ((uint8_t)0x05)
+#define GPIO_PinSource6            ((uint8_t)0x06)
+#define GPIO_PinSource7            ((uint8_t)0x07)
+#define GPIO_PinSource8            ((uint8_t)0x08)
+#define GPIO_PinSource9            ((uint8_t)0x09)
+#define GPIO_PinSource10           ((uint8_t)0x0A)
+#define GPIO_PinSource11           ((uint8_t)0x0B)
+#define GPIO_PinSource12           ((uint8_t)0x0C)
+#define GPIO_PinSource13           ((uint8_t)0x0D)
+#define GPIO_PinSource14           ((uint8_t)0x0E)
+#define GPIO_PinSource15           ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+                                       ((PINSOURCE) == GPIO_PinSource1) || \
+                                       ((PINSOURCE) == GPIO_PinSource2) || \
+                                       ((PINSOURCE) == GPIO_PinSource3) || \
+                                       ((PINSOURCE) == GPIO_PinSource4) || \
+                                       ((PINSOURCE) == GPIO_PinSource5) || \
+                                       ((PINSOURCE) == GPIO_PinSource6) || \
+                                       ((PINSOURCE) == GPIO_PinSource7) || \
+                                       ((PINSOURCE) == GPIO_PinSource8) || \
+                                       ((PINSOURCE) == GPIO_PinSource9) || \
+                                       ((PINSOURCE) == GPIO_PinSource10) || \
+                                       ((PINSOURCE) == GPIO_PinSource11) || \
+                                       ((PINSOURCE) == GPIO_PinSource12) || \
+                                       ((PINSOURCE) == GPIO_PinSource13) || \
+                                       ((PINSOURCE) == GPIO_PinSource14) || \
+                                       ((PINSOURCE) == GPIO_PinSource15))
+
+/**
+  * @}
+  */
+
+/** @defgroup Ethernet_Media_Interface 
+  * @{
+  */ 
+#define GPIO_ETH_MediaInterface_MII    ((u32)0x00000000) 
+#define GPIO_ETH_MediaInterface_RMII   ((u32)0x00000001)                                       
+
+#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \
+                                                ((INTERFACE) == GPIO_ETH_MediaInterface_RMII))
+
+/**
+  * @}
+  */                                                
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions
+  * @{
+  */
+
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+void GPIO_AFIODeInit(void);
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_EventOutputCmd(FunctionalState NewState);
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_GPIO_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_i2c.h

@@ -0,0 +1,682 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_i2c.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the I2C firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_I2C_H
+#define __STM32F10x_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */
+
+/** @defgroup I2C_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  I2C Init structure definition  
+  */
+
+typedef struct
+{
+  uint32_t I2C_ClockSpeed;          /*!< Specifies the clock frequency.
+                                         This parameter must be set to a value lower than 400kHz */
+
+  uint16_t I2C_Mode;                /*!< Specifies the I2C mode.
+                                         This parameter can be a value of @ref I2C_mode */
+
+  uint16_t I2C_DutyCycle;           /*!< Specifies the I2C fast mode duty cycle.
+                                         This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+  uint16_t I2C_OwnAddress1;         /*!< Specifies the first device own address.
+                                         This parameter can be a 7-bit or 10-bit address. */
+
+  uint16_t I2C_Ack;                 /*!< Enables or disables the acknowledgement.
+                                         This parameter can be a value of @ref I2C_acknowledgement */
+
+  uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
+                                         This parameter can be a value of @ref I2C_acknowledged_address */
+}I2C_InitTypeDef;
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup I2C_Exported_Constants
+  * @{
+  */
+
+#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
+                                   ((PERIPH) == I2C2))
+/** @defgroup I2C_mode 
+  * @{
+  */
+
+#define I2C_Mode_I2C                    ((uint16_t)0x0000)
+#define I2C_Mode_SMBusDevice            ((uint16_t)0x0002)  
+#define I2C_Mode_SMBusHost              ((uint16_t)0x000A)
+#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
+                           ((MODE) == I2C_Mode_SMBusDevice) || \
+                           ((MODE) == I2C_Mode_SMBusHost))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode 
+  * @{
+  */
+
+#define I2C_DutyCycle_16_9              ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
+#define I2C_DutyCycle_2                 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
+                                  ((CYCLE) == I2C_DutyCycle_2))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_acknowledgement
+  * @{
+  */
+
+#define I2C_Ack_Enable                  ((uint16_t)0x0400)
+#define I2C_Ack_Disable                 ((uint16_t)0x0000)
+#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
+                                 ((STATE) == I2C_Ack_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_transfer_direction 
+  * @{
+  */
+
+#define  I2C_Direction_Transmitter      ((uint8_t)0x00)
+#define  I2C_Direction_Receiver         ((uint8_t)0x01)
+#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
+                                     ((DIRECTION) == I2C_Direction_Receiver))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_acknowledged_address 
+  * @{
+  */
+
+#define I2C_AcknowledgedAddress_7bit    ((uint16_t)0x4000)
+#define I2C_AcknowledgedAddress_10bit   ((uint16_t)0xC000)
+#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
+                                             ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_registers 
+  * @{
+  */
+
+#define I2C_Register_CR1                ((uint8_t)0x00)
+#define I2C_Register_CR2                ((uint8_t)0x04)
+#define I2C_Register_OAR1               ((uint8_t)0x08)
+#define I2C_Register_OAR2               ((uint8_t)0x0C)
+#define I2C_Register_DR                 ((uint8_t)0x10)
+#define I2C_Register_SR1                ((uint8_t)0x14)
+#define I2C_Register_SR2                ((uint8_t)0x18)
+#define I2C_Register_CCR                ((uint8_t)0x1C)
+#define I2C_Register_TRISE              ((uint8_t)0x20)
+#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
+                                   ((REGISTER) == I2C_Register_CR2) || \
+                                   ((REGISTER) == I2C_Register_OAR1) || \
+                                   ((REGISTER) == I2C_Register_OAR2) || \
+                                   ((REGISTER) == I2C_Register_DR) || \
+                                   ((REGISTER) == I2C_Register_SR1) || \
+                                   ((REGISTER) == I2C_Register_SR2) || \
+                                   ((REGISTER) == I2C_Register_CCR) || \
+                                   ((REGISTER) == I2C_Register_TRISE))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_SMBus_alert_pin_level 
+  * @{
+  */
+
+#define I2C_SMBusAlert_Low              ((uint16_t)0x2000)
+#define I2C_SMBusAlert_High             ((uint16_t)0xDFFF)
+#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
+                                   ((ALERT) == I2C_SMBusAlert_High))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_PEC_position 
+  * @{
+  */
+
+#define I2C_PECPosition_Next            ((uint16_t)0x0800)
+#define I2C_PECPosition_Current         ((uint16_t)0xF7FF)
+#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
+                                       ((POSITION) == I2C_PECPosition_Current))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_NCAK_position 
+  * @{
+  */
+
+#define I2C_NACKPosition_Next           ((uint16_t)0x0800)
+#define I2C_NACKPosition_Current        ((uint16_t)0xF7FF)
+#define IS_I2C_NACK_POSITION(POSITION)  (((POSITION) == I2C_NACKPosition_Next) || \
+                                         ((POSITION) == I2C_NACKPosition_Current))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_interrupts_definition 
+  * @{
+  */
+
+#define I2C_IT_BUF                      ((uint16_t)0x0400)
+#define I2C_IT_EVT                      ((uint16_t)0x0200)
+#define I2C_IT_ERR                      ((uint16_t)0x0100)
+#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_interrupts_definition 
+  * @{
+  */
+
+#define I2C_IT_SMBALERT                 ((uint32_t)0x01008000)
+#define I2C_IT_TIMEOUT                  ((uint32_t)0x01004000)
+#define I2C_IT_PECERR                   ((uint32_t)0x01001000)
+#define I2C_IT_OVR                      ((uint32_t)0x01000800)
+#define I2C_IT_AF                       ((uint32_t)0x01000400)
+#define I2C_IT_ARLO                     ((uint32_t)0x01000200)
+#define I2C_IT_BERR                     ((uint32_t)0x01000100)
+#define I2C_IT_TXE                      ((uint32_t)0x06000080)
+#define I2C_IT_RXNE                     ((uint32_t)0x06000040)
+#define I2C_IT_STOPF                    ((uint32_t)0x02000010)
+#define I2C_IT_ADD10                    ((uint32_t)0x02000008)
+#define I2C_IT_BTF                      ((uint32_t)0x02000004)
+#define I2C_IT_ADDR                     ((uint32_t)0x02000002)
+#define I2C_IT_SB                       ((uint32_t)0x02000001)
+
+#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
+
+#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
+                           ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
+                           ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
+                           ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
+                           ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
+                           ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
+                           ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_flags_definition 
+  * @{
+  */
+
+/** 
+  * @brief  SR2 register flags  
+  */
+
+#define I2C_FLAG_DUALF                  ((uint32_t)0x00800000)
+#define I2C_FLAG_SMBHOST                ((uint32_t)0x00400000)
+#define I2C_FLAG_SMBDEFAULT             ((uint32_t)0x00200000)
+#define I2C_FLAG_GENCALL                ((uint32_t)0x00100000)
+#define I2C_FLAG_TRA                    ((uint32_t)0x00040000)
+#define I2C_FLAG_BUSY                   ((uint32_t)0x00020000)
+#define I2C_FLAG_MSL                    ((uint32_t)0x00010000)
+
+/** 
+  * @brief  SR1 register flags  
+  */
+
+#define I2C_FLAG_SMBALERT               ((uint32_t)0x10008000)
+#define I2C_FLAG_TIMEOUT                ((uint32_t)0x10004000)
+#define I2C_FLAG_PECERR                 ((uint32_t)0x10001000)
+#define I2C_FLAG_OVR                    ((uint32_t)0x10000800)
+#define I2C_FLAG_AF                     ((uint32_t)0x10000400)
+#define I2C_FLAG_ARLO                   ((uint32_t)0x10000200)
+#define I2C_FLAG_BERR                   ((uint32_t)0x10000100)
+#define I2C_FLAG_TXE                    ((uint32_t)0x10000080)
+#define I2C_FLAG_RXNE                   ((uint32_t)0x10000040)
+#define I2C_FLAG_STOPF                  ((uint32_t)0x10000010)
+#define I2C_FLAG_ADD10                  ((uint32_t)0x10000008)
+#define I2C_FLAG_BTF                    ((uint32_t)0x10000004)
+#define I2C_FLAG_ADDR                   ((uint32_t)0x10000002)
+#define I2C_FLAG_SB                     ((uint32_t)0x10000001)
+
+#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
+
+#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
+                               ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
+                               ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
+                               ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
+                               ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
+                               ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
+                               ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
+                               ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
+                               ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
+                               ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
+                               ((FLAG) == I2C_FLAG_SB))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Events 
+  * @{
+  */
+
+/*========================================
+     
+                     I2C Master Events (Events grouped in order of communication)
+                                                        ==========================================*/
+/** 
+  * @brief  Communication start
+  * 
+  * After sending the START condition (I2C_GenerateSTART() function) the master 
+  * has to wait for this event. It means that the Start condition has been correctly 
+  * released on the I2C bus (the bus is free, no other devices is communicating).
+  * 
+  */
+/* --EV5 */
+#define  I2C_EVENT_MASTER_MODE_SELECT                      ((uint32_t)0x00030001)  /* BUSY, MSL and SB flag */
+
+/** 
+  * @brief  Address Acknowledge
+  * 
+  * After checking on EV5 (start condition correctly released on the bus), the 
+  * master sends the address of the slave(s) with which it will communicate 
+  * (I2C_Send7bitAddress() function, it also determines the direction of the communication: 
+  * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges 
+  * his address. If an acknowledge is sent on the bus, one of the following events will 
+  * be set:
+  * 
+  *  1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED 
+  *     event is set.
+  *  
+  *  2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED 
+  *     is set
+  *  
+  *  3) In case of 10-Bit addressing mode, the master (just after generating the START 
+  *  and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() 
+  *  function). Then master should wait on EV9. It means that the 10-bit addressing 
+  *  header has been correctly sent on the bus. Then master should send the second part of 
+  *  the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master 
+  *  should wait for event EV6. 
+  *     
+  */
+
+/* --EV6 */
+#define  I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED        ((uint32_t)0x00070082)  /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define  I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED           ((uint32_t)0x00030002)  /* BUSY, MSL and ADDR flags */
+/* --EV9 */
+#define  I2C_EVENT_MASTER_MODE_ADDRESS10                   ((uint32_t)0x00030008)  /* BUSY, MSL and ADD10 flags */
+
+/** 
+  * @brief Communication events
+  * 
+  * If a communication is established (START condition generated and slave address 
+  * acknowledged) then the master has to check on one of the following events for 
+  * communication procedures:
+  *  
+  * 1) Master Receiver mode: The master has to wait on the event EV7 then to read 
+  *    the data received from the slave (I2C_ReceiveData() function).
+  * 
+  * 2) Master Transmitter mode: The master has to send data (I2C_SendData() 
+  *    function) then to wait on event EV8 or EV8_2.
+  *    These two events are similar: 
+  *     - EV8 means that the data has been written in the data register and is 
+  *       being shifted out.
+  *     - EV8_2 means that the data has been physically shifted out and output 
+  *       on the bus.
+  *     In most cases, using EV8 is sufficient for the application.
+  *     Using EV8_2 leads to a slower communication but ensure more reliable test.
+  *     EV8_2 is also more suitable than EV8 for testing on the last data transmission 
+  *     (before Stop condition generation).
+  *     
+  *  @note In case the  user software does not guarantee that this event EV7 is 
+  *  managed before the current byte end of transfer, then user may check on EV7 
+  *  and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
+  *  In this case the communication may be slower.
+  * 
+  */
+
+/* Master RECEIVER mode -----------------------------*/ 
+/* --EV7 */
+#define  I2C_EVENT_MASTER_BYTE_RECEIVED                    ((uint32_t)0x00030040)  /* BUSY, MSL and RXNE flags */
+
+/* Master TRANSMITTER mode --------------------------*/
+/* --EV8 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTING                 ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
+/* --EV8_2 */
+#define  I2C_EVENT_MASTER_BYTE_TRANSMITTED                 ((uint32_t)0x00070084)  /* TRA, BUSY, MSL, TXE and BTF flags */
+
+
+/*========================================
+     
+                     I2C Slave Events (Events grouped in order of communication)
+                                                        ==========================================*/
+
+/** 
+  * @brief  Communication start events
+  * 
+  * Wait on one of these events at the start of the communication. It means that 
+  * the I2C peripheral detected a Start condition on the bus (generated by master 
+  * device) followed by the peripheral address. The peripheral generates an ACK 
+  * condition on the bus (if the acknowledge feature is enabled through function 
+  * I2C_AcknowledgeConfig()) and the events listed above are set :
+  *  
+  * 1) In normal case (only one address managed by the slave), when the address 
+  *   sent by the master matches the own address of the peripheral (configured by 
+  *   I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set 
+  *   (where XXX could be TRANSMITTER or RECEIVER).
+  *    
+  * 2) In case the address sent by the master matches the second address of the 
+  *   peripheral (configured by the function I2C_OwnAddress2Config() and enabled 
+  *   by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED 
+  *   (where XXX could be TRANSMITTER or RECEIVER) are set.
+  *   
+  * 3) In case the address sent by the master is General Call (address 0x00) and 
+  *   if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) 
+  *   the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.   
+  * 
+  */
+
+/* --EV1  (all the events below are variants of EV1) */   
+/* 1) Case of One Single Address managed by the slave */
+#define  I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED          ((uint32_t)0x00020002) /* BUSY and ADDR flags */
+#define  I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED       ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
+
+/* 2) Case of Dual address managed by the slave */
+#define  I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED    ((uint32_t)0x00820000)  /* DUALF and BUSY flags */
+#define  I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080)  /* DUALF, TRA, BUSY and TXE flags */
+
+/* 3) Case of General Call enabled for the slave */
+#define  I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED        ((uint32_t)0x00120000)  /* GENCALL and BUSY flags */
+
+/** 
+  * @brief  Communication events
+  * 
+  * Wait on one of these events when EV1 has already been checked and: 
+  * 
+  * - Slave RECEIVER mode:
+  *     - EV2: When the application is expecting a data byte to be received. 
+  *     - EV4: When the application is expecting the end of the communication: master 
+  *       sends a stop condition and data transmission is stopped.
+  *    
+  * - Slave Transmitter mode:
+  *    - EV3: When a byte has been transmitted by the slave and the application is expecting 
+  *      the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
+  *      I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be 
+  *      used when the user software doesn't guarantee the EV3 is managed before the
+  *      current byte end of transfer.
+  *    - EV3_2: When the master sends a NACK in order to tell slave that data transmission 
+  *      shall end (before sending the STOP condition). In this case slave has to stop sending 
+  *      data bytes and expect a Stop condition on the bus.
+  *      
+  *  @note In case the  user software does not guarantee that the event EV2 is 
+  *  managed before the current byte end of transfer, then user may check on EV2 
+  *  and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
+  * In this case the communication may be slower.
+  *
+  */
+
+/* Slave RECEIVER mode --------------------------*/ 
+/* --EV2 */
+#define  I2C_EVENT_SLAVE_BYTE_RECEIVED                     ((uint32_t)0x00020040)  /* BUSY and RXNE flags */
+/* --EV4  */
+#define  I2C_EVENT_SLAVE_STOP_DETECTED                     ((uint32_t)0x00000010)  /* STOPF flag */
+
+/* Slave TRANSMITTER mode -----------------------*/
+/* --EV3 */
+#define  I2C_EVENT_SLAVE_BYTE_TRANSMITTED                  ((uint32_t)0x00060084)  /* TRA, BUSY, TXE and BTF flags */
+#define  I2C_EVENT_SLAVE_BYTE_TRANSMITTING                 ((uint32_t)0x00060080)  /* TRA, BUSY and TXE flags */
+/* --EV3_2 */
+#define  I2C_EVENT_SLAVE_ACK_FAILURE                       ((uint32_t)0x00000400)  /* AF flag */
+
+/*===========================      End of Events Description           ==========================================*/
+
+#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
+                             ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
+                             ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_own_address1 
+  * @{
+  */
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_clock_speed 
+  * @{
+  */
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions
+  * @{
+  */
+
+void I2C_DeInit(I2C_TypeDef* I2Cx);
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ *                         I2C State Monitoring Functions
+ *                       
+ ****************************************************************************************   
+ * This I2C driver provides three different ways for I2C state monitoring
+ *  depending on the application requirements and constraints:
+ *        
+ *  
+ * 1) Basic state monitoring:
+ *    Using I2C_CheckEvent() function:
+ *    It compares the status registers (SR1 and SR2) content to a given event
+ *    (can be the combination of one or more flags).
+ *    It returns SUCCESS if the current status includes the given flags 
+ *    and returns ERROR if one or more flags are missing in the current status.
+ *    - When to use:
+ *      - This function is suitable for most applications as well as for startup 
+ *      activity since the events are fully described in the product reference manual 
+ *      (RM0008).
+ *      - It is also suitable for users who need to define their own events.
+ *    - Limitations:
+ *      - If an error occurs (ie. error flags are set besides to the monitored flags),
+ *        the I2C_CheckEvent() function may return SUCCESS despite the communication
+ *        hold or corrupted real state. 
+ *        In this case, it is advised to use error interrupts to monitor the error
+ *        events and handle them in the interrupt IRQ handler.
+ *        
+ *        @note 
+ *        For error management, it is advised to use the following functions:
+ *          - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ *          - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ *            Where x is the peripheral instance (I2C1, I2C2 ...)
+ *          - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ *            in order to determine which error occurred.
+ *          - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ *            and/or I2C_GenerateStop() in order to clear the error flag and source,
+ *            and return to correct communication status.
+ *            
+ *
+ *  2) Advanced state monitoring:
+ *     Using the function I2C_GetLastEvent() which returns the image of both status 
+ *     registers in a single word (uint32_t) (Status Register 2 value is shifted left 
+ *     by 16 bits and concatenated to Status Register 1).
+ *     - When to use:
+ *       - This function is suitable for the same applications above but it allows to
+ *         overcome the limitations of I2C_GetFlagStatus() function (see below).
+ *         The returned value could be compared to events already defined in the 
+ *         library (stm32f10x_i2c.h) or to custom values defined by user.
+ *       - This function is suitable when multiple flags are monitored at the same time.
+ *       - At the opposite of I2C_CheckEvent() function, this function allows user to
+ *         choose when an event is accepted (when all events flags are set and no 
+ *         other flags are set or just when the needed flags are set like 
+ *         I2C_CheckEvent() function).
+ *     - Limitations:
+ *       - User may need to define his own events.
+ *       - Same remark concerning the error management is applicable for this 
+ *         function if user decides to check only regular communication flags (and 
+ *         ignores error flags).
+ *     
+ *
+ *  3) Flag-based state monitoring:
+ *     Using the function I2C_GetFlagStatus() which simply returns the status of 
+ *     one single flag (ie. I2C_FLAG_RXNE ...). 
+ *     - When to use:
+ *        - This function could be used for specific applications or in debug phase.
+ *        - It is suitable when only one flag checking is needed (most I2C events 
+ *          are monitored through multiple flags).
+ *     - Limitations: 
+ *        - When calling this function, the Status register is accessed. Some flags are
+ *          cleared when the status register is accessed. So checking the status
+ *          of one Flag, may clear other ones.
+ *        - Function may need to be called twice or more in order to monitor one 
+ *          single event.
+ *            
+ */
+
+/**
+ * 
+ *  1) Basic state monitoring
+ *******************************************************************************
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
+/**
+ * 
+ *  2) Advanced state monitoring
+ *******************************************************************************
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
+/**
+ * 
+ *  3) Flag-based state monitoring
+ *******************************************************************************
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+/**
+ *
+ *******************************************************************************
+ */
+
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_I2C_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+

project_Template/Libraries/FWlib/inc/stm32f10x_iwdg.h

@@ -0,0 +1,138 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_iwdg.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the IWDG 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IWDG_H
+#define __STM32F10x_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup IWDG
+  * @{
+  */
+
+/** @defgroup IWDG_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Constants
+  * @{
+  */
+
+/** @defgroup IWDG_WriteAccess
+  * @{
+  */
+
+#define IWDG_WriteAccess_Enable     ((uint16_t)0x5555)
+#define IWDG_WriteAccess_Disable    ((uint16_t)0x0000)
+#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
+                                      ((ACCESS) == IWDG_WriteAccess_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_prescaler 
+  * @{
+  */
+
+#define IWDG_Prescaler_4            ((uint8_t)0x00)
+#define IWDG_Prescaler_8            ((uint8_t)0x01)
+#define IWDG_Prescaler_16           ((uint8_t)0x02)
+#define IWDG_Prescaler_32           ((uint8_t)0x03)
+#define IWDG_Prescaler_64           ((uint8_t)0x04)
+#define IWDG_Prescaler_128          ((uint8_t)0x05)
+#define IWDG_Prescaler_256          ((uint8_t)0x06)
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4)  || \
+                                      ((PRESCALER) == IWDG_Prescaler_8)  || \
+                                      ((PRESCALER) == IWDG_Prescaler_16) || \
+                                      ((PRESCALER) == IWDG_Prescaler_32) || \
+                                      ((PRESCALER) == IWDG_Prescaler_64) || \
+                                      ((PRESCALER) == IWDG_Prescaler_128)|| \
+                                      ((PRESCALER) == IWDG_Prescaler_256))
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Flag 
+  * @{
+  */
+
+#define IWDG_FLAG_PVU               ((uint16_t)0x0001)
+#define IWDG_FLAG_RVU               ((uint16_t)0x0002)
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions
+  * @{
+  */
+
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
+void IWDG_SetReload(uint16_t Reload);
+void IWDG_ReloadCounter(void);
+void IWDG_Enable(void);
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IWDG_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_pwr.h

@@ -0,0 +1,154 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_pwr.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the PWR firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_PWR_H
+#define __STM32F10x_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/** @defgroup PWR_Exported_Types
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup PWR_Exported_Constants
+  * @{
+  */ 
+
+/** @defgroup PVD_detection_level 
+  * @{
+  */ 
+
+#define PWR_PVDLevel_2V2          ((uint32_t)0x00000000)
+#define PWR_PVDLevel_2V3          ((uint32_t)0x00000020)
+#define PWR_PVDLevel_2V4          ((uint32_t)0x00000040)
+#define PWR_PVDLevel_2V5          ((uint32_t)0x00000060)
+#define PWR_PVDLevel_2V6          ((uint32_t)0x00000080)
+#define PWR_PVDLevel_2V7          ((uint32_t)0x000000A0)
+#define PWR_PVDLevel_2V8          ((uint32_t)0x000000C0)
+#define PWR_PVDLevel_2V9          ((uint32_t)0x000000E0)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9))
+/**
+  * @}
+  */
+
+/** @defgroup Regulator_state_is_STOP_mode 
+  * @{
+  */
+
+#define PWR_Regulator_ON          ((uint32_t)0x00000000)
+#define PWR_Regulator_LowPower    ((uint32_t)0x00000001)
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
+                                     ((REGULATOR) == PWR_Regulator_LowPower))
+/**
+  * @}
+  */
+
+/** @defgroup STOP_mode_entry 
+  * @{
+  */
+
+#define PWR_STOPEntry_WFI         ((uint8_t)0x01)
+#define PWR_STOPEntry_WFE         ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
+ 
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag 
+  * @{
+  */
+
+#define PWR_FLAG_WU               ((uint32_t)0x00000001)
+#define PWR_FLAG_SB               ((uint32_t)0x00000002)
+#define PWR_FLAG_PVDO             ((uint32_t)0x00000004)
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+                               ((FLAG) == PWR_FLAG_PVDO))
+
+#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Functions
+  * @{
+  */
+
+void PWR_DeInit(void);
+void PWR_BackupAccessCmd(FunctionalState NewState);
+void PWR_PVDCmd(FunctionalState NewState);
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
+void PWR_WakeUpPinCmd(FunctionalState NewState);
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
+void PWR_EnterSTANDBYMode(void);
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
+void PWR_ClearFlag(uint32_t PWR_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_PWR_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_rcc.h

@@ -0,0 +1,725 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_rcc.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the RCC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RCC_H
+#define __STM32F10x_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup RCC
+  * @{
+  */
+
+/** @defgroup RCC_Exported_Types
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t SYSCLK_Frequency;  /*!< returns SYSCLK clock frequency expressed in Hz */
+  uint32_t HCLK_Frequency;    /*!< returns HCLK clock frequency expressed in Hz */
+  uint32_t PCLK1_Frequency;   /*!< returns PCLK1 clock frequency expressed in Hz */
+  uint32_t PCLK2_Frequency;   /*!< returns PCLK2 clock frequency expressed in Hz */
+  uint32_t ADCCLK_Frequency;  /*!< returns ADCCLK clock frequency expressed in Hz */
+}RCC_ClocksTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup HSE_configuration 
+  * @{
+  */
+
+#define RCC_HSE_OFF                      ((uint32_t)0x00000000)
+#define RCC_HSE_ON                       ((uint32_t)0x00010000)
+#define RCC_HSE_Bypass                   ((uint32_t)0x00040000)
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+                         ((HSE) == RCC_HSE_Bypass))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup PLL_entry_clock_source 
+  * @{
+  */
+
+#define RCC_PLLSource_HSI_Div2           ((uint32_t)0x00000000)
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL)
+ #define RCC_PLLSource_HSE_Div1           ((uint32_t)0x00010000)
+ #define RCC_PLLSource_HSE_Div2           ((uint32_t)0x00030000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+                                   ((SOURCE) == RCC_PLLSource_HSE_Div1) || \
+                                   ((SOURCE) == RCC_PLLSource_HSE_Div2))
+#else
+ #define RCC_PLLSource_PREDIV1            ((uint32_t)0x00010000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+                                   ((SOURCE) == RCC_PLLSource_PREDIV1))
+#endif /* STM32F10X_CL */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup PLL_multiplication_factor 
+  * @{
+  */
+#ifndef STM32F10X_CL
+ #define RCC_PLLMul_2                    ((uint32_t)0x00000000)
+ #define RCC_PLLMul_3                    ((uint32_t)0x00040000)
+ #define RCC_PLLMul_4                    ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5                    ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6                    ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7                    ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8                    ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9                    ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_10                   ((uint32_t)0x00200000)
+ #define RCC_PLLMul_11                   ((uint32_t)0x00240000)
+ #define RCC_PLLMul_12                   ((uint32_t)0x00280000)
+ #define RCC_PLLMul_13                   ((uint32_t)0x002C0000)
+ #define RCC_PLLMul_14                   ((uint32_t)0x00300000)
+ #define RCC_PLLMul_15                   ((uint32_t)0x00340000)
+ #define RCC_PLLMul_16                   ((uint32_t)0x00380000)
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3)   || \
+                              ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5)   || \
+                              ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7)   || \
+                              ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9)   || \
+                              ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \
+                              ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \
+                              ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \
+                              ((MUL) == RCC_PLLMul_16))
+
+#else
+ #define RCC_PLLMul_4                    ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5                    ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6                    ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7                    ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8                    ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9                    ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_6_5                  ((uint32_t)0x00340000)
+
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+                              ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+                              ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+                              ((MUL) == RCC_PLLMul_6_5))
+#endif /* STM32F10X_CL */                              
+/**
+  * @}
+  */
+
+/** @defgroup PREDIV1_division_factor
+  * @{
+  */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define  RCC_PREDIV1_Div1               ((uint32_t)0x00000000)
+ #define  RCC_PREDIV1_Div2               ((uint32_t)0x00000001)
+ #define  RCC_PREDIV1_Div3               ((uint32_t)0x00000002)
+ #define  RCC_PREDIV1_Div4               ((uint32_t)0x00000003)
+ #define  RCC_PREDIV1_Div5               ((uint32_t)0x00000004)
+ #define  RCC_PREDIV1_Div6               ((uint32_t)0x00000005)
+ #define  RCC_PREDIV1_Div7               ((uint32_t)0x00000006)
+ #define  RCC_PREDIV1_Div8               ((uint32_t)0x00000007)
+ #define  RCC_PREDIV1_Div9               ((uint32_t)0x00000008)
+ #define  RCC_PREDIV1_Div10              ((uint32_t)0x00000009)
+ #define  RCC_PREDIV1_Div11              ((uint32_t)0x0000000A)
+ #define  RCC_PREDIV1_Div12              ((uint32_t)0x0000000B)
+ #define  RCC_PREDIV1_Div13              ((uint32_t)0x0000000C)
+ #define  RCC_PREDIV1_Div14              ((uint32_t)0x0000000D)
+ #define  RCC_PREDIV1_Div15              ((uint32_t)0x0000000E)
+ #define  RCC_PREDIV1_Div16              ((uint32_t)0x0000000F)
+
+ #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16))
+#endif
+/**
+  * @}
+  */
+
+
+/** @defgroup PREDIV1_clock_source
+  * @{
+  */
+#ifdef STM32F10X_CL
+/* PREDIV1 clock source (for STM32 connectivity line devices) */
+ #define  RCC_PREDIV1_Source_HSE         ((uint32_t)0x00000000) 
+ #define  RCC_PREDIV1_Source_PLL2        ((uint32_t)0x00010000) 
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \
+                                        ((SOURCE) == RCC_PREDIV1_Source_PLL2)) 
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/* PREDIV1 clock source (for STM32 Value line devices) */
+ #define  RCC_PREDIV1_Source_HSE         ((uint32_t)0x00000000) 
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) 
+#endif
+/**
+  * @}
+  */
+
+#ifdef STM32F10X_CL
+/** @defgroup PREDIV2_division_factor
+  * @{
+  */
+  
+ #define  RCC_PREDIV2_Div1               ((uint32_t)0x00000000)
+ #define  RCC_PREDIV2_Div2               ((uint32_t)0x00000010)
+ #define  RCC_PREDIV2_Div3               ((uint32_t)0x00000020)
+ #define  RCC_PREDIV2_Div4               ((uint32_t)0x00000030)
+ #define  RCC_PREDIV2_Div5               ((uint32_t)0x00000040)
+ #define  RCC_PREDIV2_Div6               ((uint32_t)0x00000050)
+ #define  RCC_PREDIV2_Div7               ((uint32_t)0x00000060)
+ #define  RCC_PREDIV2_Div8               ((uint32_t)0x00000070)
+ #define  RCC_PREDIV2_Div9               ((uint32_t)0x00000080)
+ #define  RCC_PREDIV2_Div10              ((uint32_t)0x00000090)
+ #define  RCC_PREDIV2_Div11              ((uint32_t)0x000000A0)
+ #define  RCC_PREDIV2_Div12              ((uint32_t)0x000000B0)
+ #define  RCC_PREDIV2_Div13              ((uint32_t)0x000000C0)
+ #define  RCC_PREDIV2_Div14              ((uint32_t)0x000000D0)
+ #define  RCC_PREDIV2_Div15              ((uint32_t)0x000000E0)
+ #define  RCC_PREDIV2_Div16              ((uint32_t)0x000000F0)
+
+ #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16))
+/**
+  * @}
+  */
+
+
+/** @defgroup PLL2_multiplication_factor
+  * @{
+  */
+  
+ #define  RCC_PLL2Mul_8                  ((uint32_t)0x00000600)
+ #define  RCC_PLL2Mul_9                  ((uint32_t)0x00000700)
+ #define  RCC_PLL2Mul_10                 ((uint32_t)0x00000800)
+ #define  RCC_PLL2Mul_11                 ((uint32_t)0x00000900)
+ #define  RCC_PLL2Mul_12                 ((uint32_t)0x00000A00)
+ #define  RCC_PLL2Mul_13                 ((uint32_t)0x00000B00)
+ #define  RCC_PLL2Mul_14                 ((uint32_t)0x00000C00)
+ #define  RCC_PLL2Mul_16                 ((uint32_t)0x00000E00)
+ #define  RCC_PLL2Mul_20                 ((uint32_t)0x00000F00)
+
+ #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9)  || \
+                               ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \
+                               ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \
+                               ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \
+                               ((MUL) == RCC_PLL2Mul_20))
+/**
+  * @}
+  */
+
+
+/** @defgroup PLL3_multiplication_factor
+  * @{
+  */
+
+ #define  RCC_PLL3Mul_8                  ((uint32_t)0x00006000)
+ #define  RCC_PLL3Mul_9                  ((uint32_t)0x00007000)
+ #define  RCC_PLL3Mul_10                 ((uint32_t)0x00008000)
+ #define  RCC_PLL3Mul_11                 ((uint32_t)0x00009000)
+ #define  RCC_PLL3Mul_12                 ((uint32_t)0x0000A000)
+ #define  RCC_PLL3Mul_13                 ((uint32_t)0x0000B000)
+ #define  RCC_PLL3Mul_14                 ((uint32_t)0x0000C000)
+ #define  RCC_PLL3Mul_16                 ((uint32_t)0x0000E000)
+ #define  RCC_PLL3Mul_20                 ((uint32_t)0x0000F000)
+
+ #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9)  || \
+                               ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \
+                               ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \
+                               ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \
+                               ((MUL) == RCC_PLL3Mul_20))
+/**
+  * @}
+  */
+
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup System_clock_source 
+  * @{
+  */
+
+#define RCC_SYSCLKSource_HSI             ((uint32_t)0x00000000)
+#define RCC_SYSCLKSource_HSE             ((uint32_t)0x00000001)
+#define RCC_SYSCLKSource_PLLCLK          ((uint32_t)0x00000002)
+#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
+                                      ((SOURCE) == RCC_SYSCLKSource_HSE) || \
+                                      ((SOURCE) == RCC_SYSCLKSource_PLLCLK))
+/**
+  * @}
+  */
+
+/** @defgroup AHB_clock_source 
+  * @{
+  */
+
+#define RCC_SYSCLK_Div1                  ((uint32_t)0x00000000)
+#define RCC_SYSCLK_Div2                  ((uint32_t)0x00000080)
+#define RCC_SYSCLK_Div4                  ((uint32_t)0x00000090)
+#define RCC_SYSCLK_Div8                  ((uint32_t)0x000000A0)
+#define RCC_SYSCLK_Div16                 ((uint32_t)0x000000B0)
+#define RCC_SYSCLK_Div64                 ((uint32_t)0x000000C0)
+#define RCC_SYSCLK_Div128                ((uint32_t)0x000000D0)
+#define RCC_SYSCLK_Div256                ((uint32_t)0x000000E0)
+#define RCC_SYSCLK_Div512                ((uint32_t)0x000000F0)
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
+                           ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
+                           ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
+                           ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
+                           ((HCLK) == RCC_SYSCLK_Div512))
+/**
+  * @}
+  */ 
+
+/** @defgroup APB1_APB2_clock_source 
+  * @{
+  */
+
+#define RCC_HCLK_Div1                    ((uint32_t)0x00000000)
+#define RCC_HCLK_Div2                    ((uint32_t)0x00000400)
+#define RCC_HCLK_Div4                    ((uint32_t)0x00000500)
+#define RCC_HCLK_Div8                    ((uint32_t)0x00000600)
+#define RCC_HCLK_Div16                   ((uint32_t)0x00000700)
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
+                           ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
+                           ((PCLK) == RCC_HCLK_Div16))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Interrupt_source 
+  * @{
+  */
+
+#define RCC_IT_LSIRDY                    ((uint8_t)0x01)
+#define RCC_IT_LSERDY                    ((uint8_t)0x02)
+#define RCC_IT_HSIRDY                    ((uint8_t)0x04)
+#define RCC_IT_HSERDY                    ((uint8_t)0x08)
+#define RCC_IT_PLLRDY                    ((uint8_t)0x10)
+#define RCC_IT_CSS                       ((uint8_t)0x80)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+                            ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+                            ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS))
+ #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00))
+#else
+ #define RCC_IT_PLL2RDY                  ((uint8_t)0x20)
+ #define RCC_IT_PLL3RDY                  ((uint8_t)0x40)
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+                            ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+                            ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
+                            ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY))
+ #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00)
+#endif /* STM32F10X_CL */ 
+
+
+/**
+  * @}
+  */
+
+#ifndef STM32F10X_CL
+/** @defgroup USB_Device_clock_source 
+  * @{
+  */
+
+ #define RCC_USBCLKSource_PLLCLK_1Div5   ((uint8_t)0x00)
+ #define RCC_USBCLKSource_PLLCLK_Div1    ((uint8_t)0x01)
+
+ #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \
+                                      ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1))
+/**
+  * @}
+  */
+#else
+/** @defgroup USB_OTG_FS_clock_source 
+  * @{
+  */
+ #define RCC_OTGFSCLKSource_PLLVCO_Div3    ((uint8_t)0x00)
+ #define RCC_OTGFSCLKSource_PLLVCO_Div2    ((uint8_t)0x01)
+
+ #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \
+                                         ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2))
+/**
+  * @}
+  */
+#endif /* STM32F10X_CL */ 
+
+
+#ifdef STM32F10X_CL
+/** @defgroup I2S2_clock_source 
+  * @{
+  */
+ #define RCC_I2S2CLKSource_SYSCLK        ((uint8_t)0x00)
+ #define RCC_I2S2CLKSource_PLL3_VCO      ((uint8_t)0x01)
+
+ #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \
+                                        ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO))
+/**
+  * @}
+  */
+
+/** @defgroup I2S3_clock_source 
+  * @{
+  */
+ #define RCC_I2S3CLKSource_SYSCLK        ((uint8_t)0x00)
+ #define RCC_I2S3CLKSource_PLL3_VCO      ((uint8_t)0x01)
+
+ #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \
+                                        ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO))    
+/**
+  * @}
+  */
+#endif /* STM32F10X_CL */  
+  
+
+/** @defgroup ADC_clock_source 
+  * @{
+  */
+
+#define RCC_PCLK2_Div2                   ((uint32_t)0x00000000)
+#define RCC_PCLK2_Div4                   ((uint32_t)0x00004000)
+#define RCC_PCLK2_Div6                   ((uint32_t)0x00008000)
+#define RCC_PCLK2_Div8                   ((uint32_t)0x0000C000)
+#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \
+                               ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8))
+/**
+  * @}
+  */
+
+/** @defgroup LSE_configuration 
+  * @{
+  */
+
+#define RCC_LSE_OFF                      ((uint8_t)0x00)
+#define RCC_LSE_ON                       ((uint8_t)0x01)
+#define RCC_LSE_Bypass                   ((uint8_t)0x04)
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+                         ((LSE) == RCC_LSE_Bypass))
+/**
+  * @}
+  */
+
+/** @defgroup RTC_clock_source 
+  * @{
+  */
+
+#define RCC_RTCCLKSource_LSE             ((uint32_t)0x00000100)
+#define RCC_RTCCLKSource_LSI             ((uint32_t)0x00000200)
+#define RCC_RTCCLKSource_HSE_Div128      ((uint32_t)0x00000300)
+#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
+                                      ((SOURCE) == RCC_RTCCLKSource_LSI) || \
+                                      ((SOURCE) == RCC_RTCCLKSource_HSE_Div128))
+/**
+  * @}
+  */
+
+/** @defgroup AHB_peripheral 
+  * @{
+  */
+
+#define RCC_AHBPeriph_DMA1               ((uint32_t)0x00000001)
+#define RCC_AHBPeriph_DMA2               ((uint32_t)0x00000002)
+#define RCC_AHBPeriph_SRAM               ((uint32_t)0x00000004)
+#define RCC_AHBPeriph_FLITF              ((uint32_t)0x00000010)
+#define RCC_AHBPeriph_CRC                ((uint32_t)0x00000040)
+
+#ifndef STM32F10X_CL
+ #define RCC_AHBPeriph_FSMC              ((uint32_t)0x00000100)
+ #define RCC_AHBPeriph_SDIO              ((uint32_t)0x00000400)
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00))
+#else
+ #define RCC_AHBPeriph_OTG_FS            ((uint32_t)0x00001000)
+ #define RCC_AHBPeriph_ETH_MAC           ((uint32_t)0x00004000)
+ #define RCC_AHBPeriph_ETH_MAC_Tx        ((uint32_t)0x00008000)
+ #define RCC_AHBPeriph_ETH_MAC_Rx        ((uint32_t)0x00010000)
+
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00))
+ #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00))
+#endif /* STM32F10X_CL */
+/**
+  * @}
+  */
+
+/** @defgroup APB2_peripheral 
+  * @{
+  */
+
+#define RCC_APB2Periph_AFIO              ((uint32_t)0x00000001)
+#define RCC_APB2Periph_GPIOA             ((uint32_t)0x00000004)
+#define RCC_APB2Periph_GPIOB             ((uint32_t)0x00000008)
+#define RCC_APB2Periph_GPIOC             ((uint32_t)0x00000010)
+#define RCC_APB2Periph_GPIOD             ((uint32_t)0x00000020)
+#define RCC_APB2Periph_GPIOE             ((uint32_t)0x00000040)
+#define RCC_APB2Periph_GPIOF             ((uint32_t)0x00000080)
+#define RCC_APB2Periph_GPIOG             ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC1              ((uint32_t)0x00000200)
+#define RCC_APB2Periph_ADC2              ((uint32_t)0x00000400)
+#define RCC_APB2Periph_TIM1              ((uint32_t)0x00000800)
+#define RCC_APB2Periph_SPI1              ((uint32_t)0x00001000)
+#define RCC_APB2Periph_TIM8              ((uint32_t)0x00002000)
+#define RCC_APB2Periph_USART1            ((uint32_t)0x00004000)
+#define RCC_APB2Periph_ADC3              ((uint32_t)0x00008000)
+#define RCC_APB2Periph_TIM15             ((uint32_t)0x00010000)
+#define RCC_APB2Periph_TIM16             ((uint32_t)0x00020000)
+#define RCC_APB2Periph_TIM17             ((uint32_t)0x00040000)
+#define RCC_APB2Periph_TIM9              ((uint32_t)0x00080000)
+#define RCC_APB2Periph_TIM10             ((uint32_t)0x00100000)
+#define RCC_APB2Periph_TIM11             ((uint32_t)0x00200000)
+
+#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup APB1_peripheral 
+  * @{
+  */
+
+#define RCC_APB1Periph_TIM2              ((uint32_t)0x00000001)
+#define RCC_APB1Periph_TIM3              ((uint32_t)0x00000002)
+#define RCC_APB1Periph_TIM4              ((uint32_t)0x00000004)
+#define RCC_APB1Periph_TIM5              ((uint32_t)0x00000008)
+#define RCC_APB1Periph_TIM6              ((uint32_t)0x00000010)
+#define RCC_APB1Periph_TIM7              ((uint32_t)0x00000020)
+#define RCC_APB1Periph_TIM12             ((uint32_t)0x00000040)
+#define RCC_APB1Periph_TIM13             ((uint32_t)0x00000080)
+#define RCC_APB1Periph_TIM14             ((uint32_t)0x00000100)
+#define RCC_APB1Periph_WWDG              ((uint32_t)0x00000800)
+#define RCC_APB1Periph_SPI2              ((uint32_t)0x00004000)
+#define RCC_APB1Periph_SPI3              ((uint32_t)0x00008000)
+#define RCC_APB1Periph_USART2            ((uint32_t)0x00020000)
+#define RCC_APB1Periph_USART3            ((uint32_t)0x00040000)
+#define RCC_APB1Periph_UART4             ((uint32_t)0x00080000)
+#define RCC_APB1Periph_UART5             ((uint32_t)0x00100000)
+#define RCC_APB1Periph_I2C1              ((uint32_t)0x00200000)
+#define RCC_APB1Periph_I2C2              ((uint32_t)0x00400000)
+#define RCC_APB1Periph_USB               ((uint32_t)0x00800000)
+#define RCC_APB1Periph_CAN1              ((uint32_t)0x02000000)
+#define RCC_APB1Periph_CAN2              ((uint32_t)0x04000000)
+#define RCC_APB1Periph_BKP               ((uint32_t)0x08000000)
+#define RCC_APB1Periph_PWR               ((uint32_t)0x10000000)
+#define RCC_APB1Periph_DAC               ((uint32_t)0x20000000)
+#define RCC_APB1Periph_CEC               ((uint32_t)0x40000000)
+ 
+#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00))
+
+/**
+  * @}
+  */
+
+/** @defgroup Clock_source_to_output_on_MCO_pin 
+  * @{
+  */
+
+#define RCC_MCO_NoClock                  ((uint8_t)0x00)
+#define RCC_MCO_SYSCLK                   ((uint8_t)0x04)
+#define RCC_MCO_HSI                      ((uint8_t)0x05)
+#define RCC_MCO_HSE                      ((uint8_t)0x06)
+#define RCC_MCO_PLLCLK_Div2              ((uint8_t)0x07)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+                          ((MCO) == RCC_MCO_SYSCLK)  || ((MCO) == RCC_MCO_HSE) || \
+                          ((MCO) == RCC_MCO_PLLCLK_Div2))
+#else
+ #define RCC_MCO_PLL2CLK                 ((uint8_t)0x08)
+ #define RCC_MCO_PLL3CLK_Div2            ((uint8_t)0x09)
+ #define RCC_MCO_XT1                     ((uint8_t)0x0A)
+ #define RCC_MCO_PLL3CLK                 ((uint8_t)0x0B)
+
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+                          ((MCO) == RCC_MCO_SYSCLK)  || ((MCO) == RCC_MCO_HSE) || \
+                          ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \
+                          ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \
+                          ((MCO) == RCC_MCO_PLL3CLK))
+#endif /* STM32F10X_CL */ 
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Flag 
+  * @{
+  */
+
+#define RCC_FLAG_HSIRDY                  ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY                  ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY                  ((uint8_t)0x39)
+#define RCC_FLAG_LSERDY                  ((uint8_t)0x41)
+#define RCC_FLAG_LSIRDY                  ((uint8_t)0x61)
+#define RCC_FLAG_PINRST                  ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST                  ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST                  ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST                 ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST                 ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST                 ((uint8_t)0x7F)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+                            ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+                            ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+                            ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+                            ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+                            ((FLAG) == RCC_FLAG_LPWRRST))
+#else
+ #define RCC_FLAG_PLL2RDY                ((uint8_t)0x3B) 
+ #define RCC_FLAG_PLL3RDY                ((uint8_t)0x3D) 
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+                            ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+                            ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \
+                            ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+                            ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+                            ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+                            ((FLAG) == RCC_FLAG_LPWRRST))
+#endif /* STM32F10X_CL */ 
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Functions
+  * @{
+  */
+
+void RCC_DeInit(void);
+void RCC_HSEConfig(uint32_t RCC_HSE);
+ErrorStatus RCC_WaitForHSEStartUp(void);
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
+void RCC_HSICmd(FunctionalState NewState);
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul);
+void RCC_PLLCmd(FunctionalState NewState);
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div);
+#endif
+
+#ifdef  STM32F10X_CL
+ void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div);
+ void RCC_PLL2Config(uint32_t RCC_PLL2Mul);
+ void RCC_PLL2Cmd(FunctionalState NewState);
+ void RCC_PLL3Config(uint32_t RCC_PLL3Mul);
+ void RCC_PLL3Cmd(FunctionalState NewState);
+#endif /* STM32F10X_CL */ 
+
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
+uint8_t RCC_GetSYSCLKSource(void);
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
+void RCC_PCLK1Config(uint32_t RCC_HCLK);
+void RCC_PCLK2Config(uint32_t RCC_HCLK);
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
+
+#ifndef STM32F10X_CL
+ void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource);
+#else
+ void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource);
+#endif /* STM32F10X_CL */ 
+
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2);
+
+#ifdef STM32F10X_CL
+ void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource);                                  
+ void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource);
+#endif /* STM32F10X_CL */ 
+
+void RCC_LSEConfig(uint8_t RCC_LSE);
+void RCC_LSICmd(FunctionalState NewState);
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
+void RCC_RTCCLKCmd(FunctionalState NewState);
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+
+#ifdef STM32F10X_CL
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+#endif /* STM32F10X_CL */ 
+
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_BackupResetCmd(FunctionalState NewState);
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
+void RCC_MCOConfig(uint8_t RCC_MCO);
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
+void RCC_ClearFlag(void);
+ITStatus RCC_GetITStatus(uint8_t RCC_IT);
+void RCC_ClearITPendingBit(uint8_t RCC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RCC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+

project_Template/Libraries/FWlib/inc/stm32f10x_rtc.h

@@ -0,0 +1,133 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_rtc.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the RTC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RTC_H
+#define __STM32F10x_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup RTC
+  * @{
+  */ 
+
+/** @defgroup RTC_Exported_Types
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup RTC_interrupts_define 
+  * @{
+  */
+
+#define RTC_IT_OW            ((uint16_t)0x0004)  /*!< Overflow interrupt */
+#define RTC_IT_ALR           ((uint16_t)0x0002)  /*!< Alarm interrupt */
+#define RTC_IT_SEC           ((uint16_t)0x0001)  /*!< Second interrupt */
+#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
+#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \
+                           ((IT) == RTC_IT_SEC))
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_interrupts_flags 
+  * @{
+  */
+
+#define RTC_FLAG_RTOFF       ((uint16_t)0x0020)  /*!< RTC Operation OFF flag */
+#define RTC_FLAG_RSF         ((uint16_t)0x0008)  /*!< Registers Synchronized flag */
+#define RTC_FLAG_OW          ((uint16_t)0x0004)  /*!< Overflow flag */
+#define RTC_FLAG_ALR         ((uint16_t)0x0002)  /*!< Alarm flag */
+#define RTC_FLAG_SEC         ((uint16_t)0x0001)  /*!< Second flag */
+#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
+#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \
+                               ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \
+                               ((FLAG) == RTC_FLAG_SEC))
+#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions
+  * @{
+  */
+
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState);
+void RTC_EnterConfigMode(void);
+void RTC_ExitConfigMode(void);
+uint32_t  RTC_GetCounter(void);
+void RTC_SetCounter(uint32_t CounterValue);
+void RTC_SetPrescaler(uint32_t PrescalerValue);
+void RTC_SetAlarm(uint32_t AlarmValue);
+uint32_t  RTC_GetDivider(void);
+void RTC_WaitForLastTask(void);
+void RTC_WaitForSynchro(void);
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG);
+void RTC_ClearFlag(uint16_t RTC_FLAG);
+ITStatus RTC_GetITStatus(uint16_t RTC_IT);
+void RTC_ClearITPendingBit(uint16_t RTC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RTC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

project_Template/Libraries/FWlib/inc/stm32f10x_sdio.h

@@ -0,0 +1,529 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_sdio.h
+  * @author  MCD Application Team
+  * @version V3.6.2
+  * @date    17-September-2021
+  * @brief   This file contains all the functions prototypes for the SDIO firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2012 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SDIO_H
+#define __STM32F10x_SDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup SDIO
+  * @{
+  */
+
+/** @defgroup SDIO_Exported_Types
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t SDIO_ClockEdge;            /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref SDIO_Clock_Edge */
+
+  uint32_t SDIO_ClockBypass;          /*!< Specifies whether the SDIO Clock divider bypass is
+                                           enabled or disabled.
+                                           This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+  uint32_t SDIO_ClockPowerSave;       /*!< Specifies whether SDIO Clock output is enabled or
+                                           disabled when the bus is idle.
+                                           This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+  uint32_t SDIO_BusWide;              /*!< Specifies the SDIO bus width.
+                                           This parameter can be a value of @ref SDIO_Bus_Wide */
+
+  uint32_t SDIO_HardwareFlowControl;  /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+                                           This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+  uint8_t SDIO_ClockDiv;              /*!< Specifies the clock frequency of the SDIO controller.
+                                           This parameter can be a value between 0x00 and 0xFF. */
+                                           
+} SDIO_InitTypeDef;
+
+typedef struct
+{
+  uint32_t SDIO_Argument;  /*!< Specifies the SDIO command argument which is sent
+                                to a card as part of a command message. If a command
+                                contains an argument, it must be loaded into this register
+                                before writing the command to the command register */
+
+  uint32_t SDIO_CmdIndex;  /*!< Specifies the SDIO command index. It must be lower than 0x40. */
+
+  uint32_t SDIO_Response;  /*!< Specifies the SDIO response type.
+                                This parameter can be a value of @ref SDIO_Response_Type */
+
+  uint32_t SDIO_Wait;      /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
+                                This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+  uint32_t SDIO_CPSM;      /*!< Specifies whether SDIO Command path state machine (CPSM)
+                                is enabled or disabled.
+                                This parameter can be a value of @ref SDIO_CPSM_State */
+} SDIO_CmdInitTypeDef;
+
+typedef struct
+{
+  uint32_t SDIO_DataTimeOut;    /*!< Specifies the data timeout period in card bus clock periods. */
+
+  uint32_t SDIO_DataLength;     /*!< Specifies the number of data bytes to be transferred. */
+ 
+  uint32_t SDIO_DataBlockSize;  /*!< Specifies the data block size for block transfer.
+                                     This parameter can be a value of @ref SDIO_Data_Block_Size */
+ 
+  uint32_t SDIO_TransferDir;    /*!< Specifies the data transfer direction, whether the transfer
+                                     is a read or write.
+                                     This parameter can be a value of @ref SDIO_Transfer_Direction */
+ 
+  uint32_t SDIO_TransferMode;   /*!< Specifies whether data transfer is in stream or block mode.
+                                     This parameter can be a value of @ref SDIO_Transfer_Type */
+ 
+  uint32_t SDIO_DPSM;           /*!< Specifies whether SDIO Data path state machine (DPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_DPSM_State */
+} SDIO_DataInitTypeDef;
+
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Exported_Constants
+  * @{
+  */
+
+/** @defgroup SDIO_Clock_Edge 
+  * @{
+  */
+
+#define SDIO_ClockEdge_Rising               ((uint32_t)0x00000000)
+#define SDIO_ClockEdge_Falling              ((uint32_t)0x00002000)
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
+                                  ((EDGE) == SDIO_ClockEdge_Falling))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Bypass 
+  * @{
+  */
+
+#define SDIO_ClockBypass_Disable             ((uint32_t)0x00000000)
+#define SDIO_ClockBypass_Enable              ((uint32_t)0x00000400)    
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
+                                     ((BYPASS) == SDIO_ClockBypass_Enable))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Clock_Power_Save 
+  * @{
+  */
+
+#define SDIO_ClockPowerSave_Disable         ((uint32_t)0x00000000)
+#define SDIO_ClockPowerSave_Enable          ((uint32_t)0x00000200) 
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
+                                        ((SAVE) == SDIO_ClockPowerSave_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Bus_Wide 
+  * @{
+  */
+
+#define SDIO_BusWide_1b                     ((uint32_t)0x00000000)
+#define SDIO_BusWide_4b                     ((uint32_t)0x00000800)
+#define SDIO_BusWide_8b                     ((uint32_t)0x00001000)
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
+                                ((WIDE) == SDIO_BusWide_8b))
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Hardware_Flow_Control 
+  * @{
+  */
+
+#define SDIO_HardwareFlowControl_Disable    ((uint32_t)0x00000000)
+#define SDIO_HardwareFlowControl_Enable     ((uint32_t)0x00004000)
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
+                                                ((CONTROL) == SDIO_HardwareFlowControl_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Power_State 
+  * @{
+  */
+
+#define SDIO_PowerState_OFF                 ((uint32_t)0x00000000)
+#define SDIO_PowerState_ON                  ((uint32_t)0x00000003)
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SDIO_Interrupt_sources 
+  * @{
+  */
+
+#define SDIO_IT_CCRCFAIL                    ((uint32_t)0x00000001)
+#define SDIO_IT_DCRCFAIL                    ((uint32_t)0x00000002)
+#define SDIO_IT_CTIMEOUT                    ((uint32_t)0x00000004)
+#define SDIO_IT_DTIMEOUT                    ((uint32_t)0x00000008)
+#define SDIO_IT_TXUNDERR                    ((uint32_t)0x00000010)
+#define SDIO_IT_RXOVERR                     ((uint32_t)0x00000020)
+#define SDIO_IT_CMDREND                     ((uint32_t)0x00000040)
+#define SDIO_IT_CMDSENT                     ((uint32_t)0x00000080)
+#define SDIO_IT_DATAEND                     ((uint32_t)0x00000100)
+#define SDIO_IT_STBITERR                    ((uint32_t)0x00000200)
+#define SDIO_IT_DBCKEND                     ((uint32_t)0x00000400)
+#define SDIO_IT_CMDACT                      ((uint32_t)0x00000800)
+#define SDIO_IT_TXACT                       ((uint32_t)0x00001000)
+#define SDIO_IT_RXACT                       ((uint32_t)0x00002000)
+#define SDIO_IT_TXFIFOHE                    ((uint32_t)0x00004000)
+#define SDIO_IT_RXFIFOHF                    ((uint32_t)0x00008000)
+#define SDIO_IT_TXFIFOF                     ((uint32_t)0x00010000)
+#define SDIO_IT_RXFIFOF                     ((uint32_t)0x00020000)
+#define SDIO_IT_TXFIFOE                     ((uint32_t)0x00040000)
+#define SDIO_IT_RXFIFOE                     ((uint32_t)0x00080000)
+#define SDIO_IT_TXDAVL                      ((uint32_t)0x00100000)
+#define SDIO_IT_RXDAVL                      ((uint32_t)0x00200000)
+#define SDIO_IT_SDIOIT                      ((uint32_t)0x00400000)
+#define SDIO_IT_CEATAEND                    ((uint32_t)0x00800000)
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Command_Index
+  * @{
+  */
+
+#define IS_SDIO_CMD_INDEX(INDEX)            ((INDEX) < 0x40)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Response_Type 
+  * @{
+  */
+
+#define SDIO_Response_No                    ((uint32_t)0x00000000)
+#define SDIO_Response_Short                 ((uint32_t)0x00000040)
+#define SDIO_Response_Long                  ((uint32_t)0x000000C0)
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
+                                    ((RESPONSE) == SDIO_Response_Short) || \
+                                    ((RESPONSE) == SDIO_Response_Long))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Wait_Interrupt_State 
+  * @{
+  */
+
+#define SDIO_Wait_No                        ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
+#define SDIO_Wait_IT                        ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
+#define SDIO_Wait_Pend                      ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
+                            ((WAIT) == SDIO_Wait_Pend))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_CPSM_State 
+  * @{
+  */
+
+#define SDIO_CPSM_Disable                    ((uint32_t)0x00000000)
+#define SDIO_CPSM_Enable                     ((uint32_t)0x00000400)
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Response_Registers 
+  * @{
+  */
+
+#define SDIO_RESP1                          ((uint32_t)0x00000000)
+#define SDIO_RESP2                          ((uint32_t)0x00000004)
+#define SDIO_RESP3                          ((uint32_t)0x00000008)
+#define SDIO_RESP4                          ((uint32_t)0x0000000C)
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
+                            ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Length 
+  * @{
+  */
+
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Block_Size 
+  * @{
+  */
+
+#define SDIO_DataBlockSize_1b               ((uint32_t)0x00000000)
+#define SDIO_DataBlockSize_2b               ((uint32_t)0x00000010)
+#define SDIO_DataBlockSize_4b               ((uint32_t)0x00000020)
+#define SDIO_DataBlockSize_8b               ((uint32_t)0x00000030)
+#define SDIO_DataBlockSize_16b              ((uint32_t)0x00000040)
+#define SDIO_DataBlockSize_32b              ((uint32_t)0x00000050)
+#define SDIO_DataBlockSize_64b              ((uint32_t)0x00000060)
+#define SDIO_DataBlockSize_128b             ((uint32_t)0x00000070)
+#define SDIO_DataBlockSize_256b             ((uint32_t)0x00000080)
+#define SDIO_DataBlockSize_512b             ((uint32_t)0x00000090)
+#define SDIO_DataBlockSize_1024b            ((uint32_t)0x000000A0)
+#define SDIO_DataBlockSize_2048b            ((uint32_t)0x000000B0)
+#define SDIO_DataBlockSize_4096b            ((uint32_t)0x000000C0)
+#define SDIO_DataBlockSize_8192b            ((uint32_t)0x000000D0)
+#define SDIO_DataBlockSize_16384b           ((uint32_t)0x000000E0)
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_2b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_4b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_8b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_16b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_32b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_64b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_128b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_256b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_512b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_1024b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_2048b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_4096b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_8192b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_16384b)) 
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Direction 
+  * @{
+  */
+
+#define SDIO_TransferDir_ToCard             ((uint32_t)0x00000000)
+#define SDIO_TransferDir_ToSDIO             ((uint32_t)0x00000002)
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
+                                   ((DIR) == SDIO_TransferDir_ToSDIO))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Type 
+  * @{
+  */
+
+#define SDIO_TransferMode_Block             ((uint32_t)0x00000000)
+#define SDIO_TransferMode_Stream            ((uint32_t)0x00000004)
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
+                                     ((MODE) == SDIO_TransferMode_Block))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_DPSM_State 
+  * @{
+  */
+
+#define SDIO_DPSM_Disable                    ((uint32_t)0x00000000)
+#define SDIO_DPSM_Enable                     ((uint32_t)0x00000001)
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Flags 
+  * @{
+  */
+
+#define SDIO_FLAG_CCRCFAIL                  ((uint32_t)0x00000001)
+#define SDIO_FLAG_DCRCFAIL                  ((uint32_t)0x00000002)
+#define SDIO_FLAG_CTIMEOUT                  ((uint32_t)0x00000004)
+#define SDIO_FLAG_DTIMEOUT                  ((uint32_t)0x00000008)
+#define SDIO_FLAG_TXUNDERR                  ((uint32_t)0x00000010)
+#define SDIO_FLAG_RXOVERR                   ((uint32_t)0x00000020)
+#define SDIO_FLAG_CMDREND                   ((uint32_t)0x00000040)
+#define SDIO_FLAG_CMDSENT                   ((uint32_t)0x00000080)
+#define SDIO_FLAG_DATAEND                   ((uint32_t)0x00000100)
+#define SDIO_FLAG_STBITERR                  ((uint32_t)0x00000200)
+#define SDIO_FLAG_DBCKEND                   ((uint32_t)0x00000400)
+#define SDIO_FLAG_CMDACT                    ((uint32_t)0x00000800)
+#define SDIO_FLAG_TXACT                     ((uint32_t)0x00001000)
+#define SDIO_FLAG_RXACT                     ((uint32_t)0x00002000)
+#define SDIO_FLAG_TXFIFOHE                  ((uint32_t)0x00004000)
+#define SDIO_FLAG_RXFIFOHF                  ((uint32_t)0x00008000)
+#define SDIO_FLAG_TXFIFOF                   ((uint32_t)0x00010000)
+#define SDIO_FLAG_RXFIFOF                   ((uint32_t)0x00020000)
+#define SDIO_FLAG_TXFIFOE                   ((uint32_t)0x00040000)
+#define SDIO_FLAG_RXFIFOE                   ((uint32_t)0x00080000)
+#define SDIO_FLAG_TXDAVL                    ((uint32_t)0x00100000)
+#define SDIO_FLAG_RXDAVL                    ((uint32_t)0x00200000)
+#define SDIO_FLAG_SDIOIT                    ((uint32_t)0x00400000)
+#define SDIO_FLAG_CEATAEND                  ((uint32_t)0x00800000)
+#define IS_SDIO_FLAG(FLAG) (((FLAG)  == SDIO_FLAG_CCRCFAIL) || \
+                            ((FLAG)  == SDIO_FLAG_DCRCFAIL) || \
+                            ((FLAG)  == SDIO_FLAG_CTIMEOUT) || \
+                            ((FLAG)  == SDIO_FLAG_DTIMEOUT) || \
+                            ((FLAG)  == SDIO_FLAG_TXUNDERR) || \
+                            ((FLAG)  == SDIO_FLAG_RXOVERR) || \
+                            ((FLAG)  == SDIO_FLAG_CMDREND) || \
+                            ((FLAG)  == SDIO_FLAG_CMDSENT) || \
+                            ((FLAG)  == SDIO_FLAG_DATAEND) || \
+                            ((FLAG)  == SDIO_FLAG_STBITERR) || \
+                            ((FLAG)  == SDIO_FLAG_DBCKEND) || \
+                            ((FLAG)  == SDIO_FLAG_CMDACT) || \
+                            ((FLAG)  == SDIO_FLAG_TXACT) || \
+                            ((FLAG)  == SDIO_FLAG_RXACT) || \
+                            ((FLAG)  == SDIO_FLAG_TXFIFOHE) || \
+                            ((FLAG)  == SDIO_FLAG_RXFIFOHF) || \
+                            ((FLAG)  == SDIO_FLAG_TXFIFOF) || \
+                            ((FLAG)  == SDIO_FLAG_RXFIFOF) || \
+                            ((FLAG)  == SDIO_FLAG_TXFIFOE) || \
+                            ((FLAG)  == SDIO_FLAG_RXFIFOE) || \
+                            ((FLAG)  == SDIO_FLAG_TXDAVL) || \
+                            ((FLAG)  == SDIO_FLAG_RXDAVL) || \
+                            ((FLAG)  == SDIO_FLAG_SDIOIT) || \
+                            ((FLAG)  == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT)  == SDIO_IT_CCRCFAIL) || \
+                            ((IT)  == SDIO_IT_DCRCFAIL) || \
+                            ((IT)  == SDIO_IT_CTIMEOUT) || \
+                            ((IT)  == SDIO_IT_DTIMEOUT) || \
+                            ((IT)  == SDIO_IT_TXUNDERR) || \
+                            ((IT)  == SDIO_IT_RXOVERR) || \
+                            ((IT)  == SDIO_IT_CMDREND) || \
+                            ((IT)  == SDIO_IT_CMDSENT) || \
+                            ((IT)  == SDIO_IT_DATAEND) || \
+                            ((IT)  == SDIO_IT_STBITERR) || \
+                            ((IT)  == SDIO_IT_DBCKEND) || \
+                            ((IT)  == SDIO_IT_CMDACT) || \
+                            ((IT)  == SDIO_IT_TXACT) || \
+                            ((IT)  == SDIO_IT_RXACT) || \
+                            ((IT)  == SDIO_IT_TXFIFOHE) || \
+                            ((IT)  == SDIO_IT_RXFIFOHF) || \
+                            ((IT)  == SDIO_IT_TXFIFOF) || \
+                            ((IT)  == SDIO_IT_RXFIFOF) || \
+                            ((IT)  == SDIO_IT_TXFIFOE) || \
+                            ((IT)  == SDIO_IT_RXFIFOE) || \
+                            ((IT)  == SDIO_IT_TXDAVL) || \
+                            ((IT)  == SDIO_IT_RXDAVL) || \
+                            ((IT)  == SDIO_IT_SDIOIT) || \
+                            ((IT)  == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Read_Wait_Mode 
+  * @{
+  */
+
+#define SDIO_ReadWaitMode_CLK               ((uint32_t)0x00000001)
+#define SDIO_ReadWaitMode_DATA2             ((uint32_t)0x00000000)
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
+                                     ((MODE) == SDIO_ReadWaitMode_DATA2))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Exported_Functions
+  * @{
+  */
+
+void SDIO_DeInit(void);
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_ClockCmd(FunctionalState NewState);
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);
+uint32_t SDIO_GetPowerState(void);
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
+void SDIO_DMACmd(FunctionalState NewState);
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(void);
+uint32_t SDIO_ReadData(void);
+void SDIO_WriteData(uint32_t Data);
+uint32_t SDIO_GetFIFOCount(void);
+void SDIO_StartSDIOReadWait(FunctionalState NewState);
+void SDIO_StopSDIOReadWait(FunctionalState NewState);
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+void SDIO_SetSDIOOperation(FunctionalState NewState);
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
+void SDIO_CommandCompletionCmd(FunctionalState NewState);
+void SDIO_CEATAITCmd(FunctionalState NewState);
+void SDIO_SendCEATACmd(FunctionalState NewState);
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_SDIO_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+